Added a reference to the YP development manual in the introductory
paragraph.
(From yocto-docs rev: 977eb862e27e0f2165a2d38cdaff06271726e9fc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list that describes the organization of the book needed the
"Technical Details" chapter added.
(From yocto-docs rev: bdaeb303e92f145fa6499e95ee88c629dd1c6486)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Long-term strategy for the YP Reference Manual is that it contains
reference material and not "how-to-information". A step in this
direction is to isolate any discussions on components and other
areas of YP that need talked about. So to start with, I have created
a new chapter for now named "Technical Details" that so far has
a discussion of some components and shared state. This is a
step in the direction of making this manual a reference manual and
not a "how to" manual.
Changes included removing redundant material from the 'usingpoky.xml'
chapter and also adding the new chapter 'technical-details' into the
'poky-ref-manual.xml' file used for the make.
(From yocto-docs rev: a01477f787768230bc25da2d094326922be23dd4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed some comments that were buried in the file that were
notes for working on the sstate section.
(From yocto-docs rev: bd03315031bbb1b682dcd2253f85fc184822a28e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First draft of a re-write to the "Running a Build" section to try
and satisfy YOCTO #1500. I segmented the section into three areas
rather than a single area. This allowed me to create a sub-section
for the sstate stuff where it could be addressed on its own. I sent
the draft out to Richard and Mark H. and got feedback from RP that
is going to cause further changes. Thus, I am committing this partial
change.
(From yocto-docs rev: f040ed6979e988968863016103aa3ad4e7365159)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert identified this broken link to the stable Yocto Releases.
As Reported by: Robert P. J. Day
(From yocto-docs rev: acbcfe054ce345156346b3963b41e73f20b679cc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Split the instructions for getting the packages needed for Yocto
into sections that specifically support Ubuntu, Fedora, and openSUSE.
Also, added a couple packages to openSUSE. I did not implement a
suggested change to include a note indicating future support of
the dash shell since it probably is not good policy to document plans
as they change.
Reported-by: Darren Hart
(From yocto-docs rev: 215af24bd6f697e4a3650f4669e12c6e191e2dab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Deleted the "www" from the URL to get the edison tarball. This fixed
the link.
Reported-by: William Mills
(From yocto-docs rev: aa19ff9bfb465b6a6623cda1c7a080a0c3924995)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added explanation about this class being configurable for
generating warnings or errors through use of the WARN_QA and
ERROR_QA variables. Also provided a list of tests that can
be tested for.
Fixes [YOCTO #1773]
Reported-by: Mark Hatle <mark.hatle@windriver.com>
(From yocto-docs rev: 2b15aa9076ec120d078bfcd570001a49e81df038)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The URL for the edision tarball was old and had been locked down in
the manual too early. It changed and now this fixes it.
(From yocto-docs rev: 8790b84e3a2d04e557f048e30085813a1e8fb003)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the Bug Tracking section to include rudimentary use of
Bugzilla for entering a new bug.
Fixes [YOCTO #237]
(From yocto-docs rev: 425965d7562f990c1f46901220caf4d79313336a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Michael Tomer from Koko Fitclub reported that the link to the
ADT Installer tarball was broken. Fixed the link.
As Reported by: Michael Tomer <michael.tomer@kokofitclub.com>
(From yocto-docs rev: 0a78be08b9fd2223737c50f3d0d83d14f3099834)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As Reported By: Robert P. J. Day.
Community member Robert P. J. Day scrubbed the Quick Start manual for Release
1.1. He found several areas that were incorrect. Many items were documented
pre-release and changed during the actual realeas. Naming conventions for
images and such had to be changed. Robert also found and suggested several
wording changes that resulted in clearer text.
I was not able to patch all the changes using the 'patch' command. I need to
work out some process issues still in order to apply patches directly to the
yocto-docs repository. Meanwhile, I hand-inserted the changes. Also, some
text changes were modified slightly by me to conform to the books style, etc.
Kudos to Robert for such a detailed look at the YP Quick Start.
(From yocto-docs rev: 50145cde42b6203412dbba227cde300d5b10111b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I somehow had that having a host with multiple cores and threads could
be used to increase the build time. It obviously should have been
"decrease". Kudos to Bill Fishburn for finding this goof.
(From yocto-docs rev: 8ca44aab26d4a48745dbd0cbaffa0fe9b28d7063)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Community member Robert P.J. Day pointed out that the URL used to
reference the Edison tarball in the manual was incorrect. It was
pointing to the old Poky area and not the Yocto-1.1 area. I have
updated the example 'wget' command with the correct URL.
(From yocto-docs rev: 402500c03a625dd7e2561775926e3a983daa0ab6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Discovered a missing section for installation of the Eclipse Yocto Plug-in.
This information is critical to the release. Jessica discovered the problem.
New section added that describes how to install the plug-in as a standard
"New Software" installation from within the Eclipse IDE.
(From yocto-docs rev: d4976ec56d39813a72519387897023f65a5884f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The re-structuring of the web server that holds the documents created
some bad links. I thought I had gotten them all but apparently not.
this is a drawback of not being able to test things until after stuff
is done. In any case, I grepped through everything and this takes
care of it.
(From yocto-docs rev: cdbc3b3b7f6d6ff01024b977f966459cf414ad5c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The restructuring of the web site where we store manuals broke some
links that were cut-and-pasted in from older work. These slipped by
me so not changing them would direct the user to a 1.0 version of
the externally referenced manual rather than the 1.1 version.
I also got rid of a visible "WRITER'S NOTE" in the document that
was left behind.
(From yocto-docs rev: 1508826312a2fe35e5d693821a4c7737baafcb2e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had to add some changes to the way we invoke qemu to show multiple
processor support. I needed the qemuparam "-smp 2". There are
other minor edits as well.
(From yocto-docs rev: 508863634ce537b0936f8e44f87b90bef678c122)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I somehow had either dreamed the word "einstein" into the release
for 1.1 and had it in there as part of the tarball name, etc.
I have replaced this obviously with "edison."
Other edits involved making the references to outside documents
more consistent.
(From yocto-docs rev: 2407b7dd89712c489d515e97d44e3c7dc0b64d20)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the pathnames for kernel 3.0 from 2.37
(From yocto-docs rev: 220ce5fbb3663940b5940445190d30d98f58a438)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor edits for the kernel example.
(From yocto-docs rev: 01e9f01662efad746fbfc34820b6efeb34affecd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After greping through the documentation directory, I addressed
all the <ulink> statements that used to have yocto-1.0 in the URL.
They are now yocto-1.1.
(From yocto-docs rev: 97d160263c5905fdeaf4ec285bc5359918790581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV to import a series of changes to synchronize
live booting between multiple targets:
d05450e meta/fri2: enable booting from iso
3da7d2a meta/fishriver: enable booting from iso
52e1c49 meta/emenlow: enable booting from iso
87918ae meta/crownbay: enable booting from iso
(From OE-Core rev: 7100c50c8697a3eec446b9189bf49ecbea9b7264)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-ran the exmaples to set up various Git repos and updated the output.
Also fixed a bad tarball name from edison-1.1 to edison-6.0
(From yocto-docs rev: 6538d588fa35986ff301a22d327af73c337ec43c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a pass through the book to clean up all areas in preparation to
running the examples again. Most changes were punctuation, manual
section reference formats, and wordings.
(From yocto-docs rev: 0d054f79c82ddc204938dea187312d1a80d0a2e1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
More changes to the internal section references. Using <link> rather than
<xref> to get rid of the section number in the reference.
(From yocto-docs rev: 4351fd4898c517e25235611893b1cd059cbcc2f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I am using a certain form to reference other sections in the current
or other manual. I updated the references to follow this form.
(From yocto-docs rev: 2ba41ac2f355dbe66af19e356f9246b7485585b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing instruction to tackle
RPC: Authentication error; why = Client credential too weak
Are not applicable to ubuntu 11.10 especially
Therefore add the magic needed for ubuntu 11.10
(From OE-Core rev: faae191e8c1920745e0ea9abf7b8b26eb4561096)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made several changes based on feedback from Jessica Zhang.
1. Removed "SDKVERSION" as a way of identifying the directory in
which a toolchain tarball is installed. I replaced with "1.1"
2. Cleaned up the bitbake command verbage to consistently use
'bitbake' command.
3. Cleaned up an erroneous reference to the toolchain environment
setup scripts. I was referring the user to the oe-init-build-env
area.
4. Changed wording to indicate that the toolchain tarball is generated
after running bitbake rather than installing the toolchain.
5. Replaced the gmae tarball file used in an example to be the
regular taball.
(From yocto-docs rev: f7c3e4f4a666121a29825099d451eab1accb0616)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the bernard examples used when creating Git repos to reflect
the edison release.
(From yocto-docs rev: d345cb08905e7f5e21b1649af5e876317cc68931)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed several small things in the example as I worked through it
once again. The commit IDs changed for using the atom-pc kernel.
Also the command to build the sato image can no longer use 'live'.
(From yocto-docs rev: faff1e7f21b5059dfe708c6a3d83116c7349fe55)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No need to use the long command to restart Eclipse. It will have
been restarted as part of the procedure. I updated the last paragraph
to simply point the user off to the next section.
(From yocto-docs rev: bca280e74f81a0401c520c8a59e9e07e16f28b8b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are for installing the YP Eclipse plug-in using a built out
ZIP file.
(From yocto-docs rev: ea50f63d448b4ff6026a9334440058511782461d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Feedback from Richard Purdie inserted. I made an edit pass for
style to Richard's re-write.
(From yocto-docs rev: e5bb08e966614c610e6357642b3b2d1522332f7f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made some slight edits to configuring the Eclipse IDE and the
procedure to install the plug-in from the zip file. This is not
complete yet.
(From yocto-docs rev: 96de3d21946d64e6b877f067912da8677c3d373a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section used the term "tree construction" somewhat out of context.
The section really focuses on what the build process and the user does
prior to compilation. I changed wording to indicate the tree is
validated to be sure that the SRC_URI point to the right stuff and
that the BSP build branch exists.
(From yocto-docs rev: e6332d5045b21354b53bbbe1203f9d52d4d97964)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made a few corrections to the section describing how to build
the tcf-agent into non-sdk images.
(From yocto-docs rev: e78dc3b3d3dd443506e78651cf9673358577c21d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The YP only ships one pre-built image that has the tcf-agent built
into it - core-image-sato-sdk. There are a couple methods that exist
to create images that do not normally have this agent so that they
will have it. I updated the "Getting the Images" section to
contain those steps. Lianhao and Jessica Zhang were the technical
resources for these changes. These changes are the first draft.
(From yocto-docs rev: 85432e4892c3fe924bf90961f89e8edfd9693e84)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I created a section on how to prepare for and use the multilib
feature. The information is leveraged off the "Multilib" wiki page
at http://wiki.yoctoproject.org/wiki/Multilib. This is the first
draft of the changes. I expect corrections.
(From yocto-docs rev: 8cf41c90f772018f4f144d63df911912cc298d70)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated a link that was an autobuilder link to be
http://www.yoctoproject.org/downloads/yocto-1.1/machines.
(From yocto-docs rev: 91a4056a285b53f8c73494e8af88d9a98d6d61e0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the title pages for the ADT, BSP, Dev, and Ref manuals to
contain the Oct 6 release date for the books. Also, changed the
author field for the BSP guide to include Tom Zanussi as well
as Richard Purdie.
(From yocto-docs rev: 301da0a5b305e4b332397bb67f6a6a77751991d2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I went through and made sure examples are relevant, wording is correct,
large blocks of unused text was removed, and some references included
to other YP documents.
(From yocto-docs rev: 2231082530dd9cecc234f5f024c4e246afb2968d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Richard Purdie
Bruce Ashfield
Khem Raj