Building libunwind, then gcc-runtime causes build failures. This is hard
to fix since gcc-runtime wants the internal gcc unwind.h header but libunwind
wants to provide this. There are differences in include behaviour between gcc
and glibc which are by design.
This patch hacks around the issue by looking for a define used during gcc-runtime's
build and skipping to the internal header in that case. The patch is only enabled
on musl and is the best workaround I could come up with to unblock failing builds
on our autobuilder.
[YOCTO #10129]
(From OE-Core rev: cd8b64b0a236b27e5383e2394de65b9bfd4b6677)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove documentation as swabber was removed from oe-core with
this commit: commit a7ddbea345
(From yocto-docs rev: f3c462b2c6aa20de53c77e5d93cf397ae36cb2bb)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous description was not accurate. Looking at the code,
SERIAL_CONSOLES_CHECK does not act like SERIAL_CONSOLES, as it
will not add consoles to enable but only check and disable
consoles defined by SERIAL_CONSOLES. Also, the previous patch
adds aliasing functionality that needed to be documented.
I (Scott Rifenbark) did a bit of word-smithing here from the
original patch.
(From yocto-docs rev: 55d07048e831f0dbc955b74e029fe26ed276675b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SYSLINUX_ROOT variable was renamed to ROOT_VM in krogoth.
(From yocto-docs rev: c4bbe8bc4967dd631b939f6806d65e2862df3424)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10131]
Fixed some small issues here and there. Also, provided a
second itemized item in the note box turning it into a
notes box.
(From yocto-docs rev: a736c3bb707e81eda7760c642084a5a7c4de2539)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10132]
My attempt to be complete on the filenames that have a "pid"
portion were not correct. I have removed them from the first
paragraph.
(From yocto-docs rev: 8261b93b39df9abc9f9d6ccb4c00dc11330ad516)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10135]
Some small problems were fixed:
* Added a cross-reference in the FILES glossary entry to the
PACKAGES variable. The two are tied and there was not a
reference to it.
* Removed a redundant "/" character in a pathname example in
the dev-manual.
* Removed a redundant "/" character in an example pathname
in the FILES glossary description.
(From yocto-docs rev: 11a397c232696deece7ac5c6dafcadb87d7a5775)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10132]
Provided a better description and removed a deprecated sentence
near the end.
(From yocto-docs rev: bbe588e19bb9ed58883ae7c770da551de659e982)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10131]
The section was renamed "Viewing Dependencies" for consistency.
The section was moved up to be the third item in the sub-section
list. The section was extensively re-written to provide more
clarity and options for the user to view dependencies.
(From yocto-docs rev: d521c3aabe6ded105cde6f7b3563c85340f759fd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10099]
Renamed the log file section to better describe what the user
is accomplishing.
Renamed and repositioned the variables section to better describe
and emphasize the task. Also fleshed out the variables section with
more information.
(From yocto-docs rev: 0606fe481416a07bf98fc8ae79a30c1d62e75e6d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9285]
Added a new bullet item to note that Using QEMU in usermode
might not work properly when running 64-bit binaries under
32-bit host machines. In particular, "qemumips64" is known
to not work under i686.
(From yocto-docs rev: 896beb3fddd427f8327d4ddd35be253866c90377)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10094]
For PROVIDES, I added information about how the do_package
task goes through PACKAGES and uses the FILES variable
corresponding to each package to assign files to the package.
For FILES, I added a blurb to the existing note how you can
find default values for the FILES* variables.
(From yocto-docs rev: c70f79a608076c5c0490918b87986554bc5d8353)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided a better, more accurate description of this variable.
(From yocto-docs rev: 020f927bc01d662601fb44b19e4c6bc70e5e5ee7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10070]
Updated these three variables with various items to make clear
that PARALLEL_MAKE and PARALLEL_MAKEINST won't work unless
EXTRA_OEMAKE is passed to "make".
(From yocto-docs rev: 4f8b56cc67502cd672e0296cf2f143ecbcde22ac)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10069]
Added a note at the end of the variable description to
explain how runtime virual dependencies work.
(From yocto-docs rev: de1d16017c27b6b2502735fc41acd22660f6e7b9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10060]
I provided a new section in the Technical Details chapter. Also
some extra explanation was added to both the do_install task and to
the D variable.
(From yocto-docs rev: 565fb11d72bf8c585469bcf65f92b6738e344813)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10002]
Created new base description for EXTRANATIVEPATH.
(From yocto-docs rev: aafc2de2657203440fe4b0bf3895cf367063bed1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10012]
There was a mistake referring to the wrong example recipe. I
changed "core-image-sato-initramfs.bb" to
"core-image-minimal-initramfs.bb" for the fix.
(From yocto-docs rev: 4d63e1fc5786556dd0dd5ca1435252d43dbd745a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10013]
I enhanced the description with more detail all around.
(From yocto-docs rev: 319dabecf5abf0884295b991f681bed0e1dbf673)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9964]
There was a small fix to change oe_runmake task to oe_runmake
function.
(From yocto-docs rev: aa049c9165c67e041c84fab9fabfbe98828c79bb)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10012]
Added a new paragraph to the end explaining the default behavior.
(From yocto-docs rev: 1591f96fc04f64906145f272d205ec6c44ac70c0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10012]
Updated the description completely. New more detailed information.
(From yocto-docs rev: cb6ce91674ab092324f97ca4e56a0cbcd9140fbe)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more information about virtual targets to the end of the
description.
Fixes [YOCTO #10011]
(From yocto-docs rev: ce7ae0c6ad4ad3a0c2422b797556563dc48a9a5b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe only makes sense when systemd is enabled and otherwise causes
world build failures.
(From OE-Core rev: 5dca6cc2fcdb2799c19b1697f0647a16ce296290)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test for various files is wrong and will always be
true, even if init.d does not exist.
Exit if init.d does not exist, and correctly test for
file existence otherwise.
(From OE-Core rev: 8183309080aee45746daaff46b0506b09b5bd269)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unfortunately to implenent multiconfig support in bitbake some APIs
had to change. This updates code in OE to match the changes in bitbake.
Its mostly periperhal changes around devtool/recipetool
[Will need a bitbake version requirement bump which I'll make when merging]
(From OE-Core rev: 041212fa37bb83acac5ce4ceb9b7b77ad172c5c3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds the notion of supporting multiple configurations within
a single build. To enable it, set a line in local.conf like:
BBMULTICONFIG = "configA configB configC"
This would tell bitbake that before it parses the base configuration,
it should load conf/configA.conf and so on for each different
configuration. These would contain lines like:
MACHINE = "A"
or other variables which can be set which can be built in the same
build directory (or change TMPDIR not to conflict).
One downside I've already discovered is that if we want to inherit this
file right at the start of parsing, the only place you can put the
configurations is in "cwd", since BBPATH isn't constructed until the
layers are parsed and therefore using it as a preconf file isn't
possible unless its located there.
Execution of these targets takes the form "bitbake
multiconfig:configA:core-image-minimal core-image-sato" so similar to
our virtclass approach for native/nativesdk/multilib using BBCLASSEXTEND.
Implementation wise, the implication is that instead of tasks being
uniquely referenced with "recipename/fn:task" it now needs to be
"configuration:recipename:task".
We already started using "virtual" filenames for recipes when we
implemented BBCLASSEXTEND and this patch adds a new prefix to
these, "multiconfig:<configname>:" and hence avoid changes to a large
part of the codebase thanks to this. databuilder has an internal array
of data stores and uses the right one depending on the supplied virtual
filename.
That trick allows us to use the existing parsing code including the
multithreading mostly unchanged as well as most of the cache code.
For recipecache, we end up with a dict of these accessed by
multiconfig (mc). taskdata and runqueue can only cope with one recipecache
so for taskdata, we pass in each recipecache and have it compute the result
and end up with an array of taskdatas. We can only have one runqueue so there
extensive changes there.
This initial implementation has some drawbacks:
a) There are no inter-multi-configuration dependencies as yet
b) There are no sstate optimisations. This means if the build uses the
same object twice in say two different TMPDIRs, it will either load from
an existing sstate cache at the start or build it twice. We can then in
due course look at ways in which it would only build it once and then
reuse it. This will likely need significant changes to the way sstate
currently works to make that possible.
(Bitbake rev: 5287991691578825c847bac2368e9b51c0ede3f0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you don't do this, with Python 3 you get a warning on exit under some
circumstances.
(Bitbake rev: 49502685df3e616023df352823156381b1f79cd3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
unset VAR
will clear variable VAR
unset VAR[flag]
will clear flag "flag" from var VAR
(Bitbake rev: bedbd46ece8d1285b5cd2ea07dc64b4875b479aa)
Signed-off-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than passing in a datastore to build on top of, use the data builder
object in the cache and base the parsed recipe from this. This turns
things into proper objects building from one another rather than messy
mixes of static and class functions.
This sets things up so we can support parsing and building multiple
configurations.
(Bitbake rev: fef18b445c0cb6b266cd939b9c78d7cbce38663f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some cases we want to parse recipes without any cache
setup or involvement. Split out the standalone functions into
a NoCache variant which the Cache is based upon, setting the scene
for further cleanup and restructuring.
(Bitbake rev: 120b64ea6a0c0ecae7af0fd15d989934fa4f1c36)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather that the current mix of static and class methods, refactor
so that the cache has the databuilder object internally. This becomes
useful for the following patches for multi config support.
It effectively completes some of the object oriented work we've been
working towards in the bitbake core for a while.
(Bitbake rev: 7da062956bf40c1b9ac1aaee222a13f40bba9b19)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needing to access these static methods through a class doesn't
make sense. Move these to become module level standalone functions.
(Bitbake rev: 6d06e93c6a2204af6d2cf747a4610bd0eeb9f202)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simple refactoring to allow for multiconfig support.
(Bitbake rev: 266b848da40904446eb1d084bbdc5307a9b45197)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the introduction of multi-config and the possibility of distributed
builds we need arrays of workers rather than the existing two.
This refactors the code to have a dict() of workers and a dict of
fakeworkers, represented by objects. The code can iterate over these.
This is separated out from the multi-config changes since its separable
and clearer this way.
(Bitbake rev: 8181d96e0a4df0aa47287669681116fa65bcae16)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current codepaths are rather confusing. Stop passing these
as parameters and use the ones from when the object is created.
(Bitbake rev: 8c992c148d9619b10eeae8bbd9376ecf408037a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With some recent changes in the kern tools, we can drop some changes in
the yocto-bsp and yocto-kernel tools that ensured proper patching and
BSP inheritance.
In particular, we no longer need to signify the start of patching, and
we must instruct the tools that we only want configuration fragments
via inheritance .. no patches (since they are already applied).
(From meta-yocto rev: 34ed5eebd0b5baab98b6b2d7b3f06ca40932b37d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This error has occurred on the MinnowBoard Max and Turbot since its
inception. It supposedly indicates a non-working SD card reader, but
ours works fine. Whitelist the error.
(From OE-Core rev: d577028a1d756b70da056dee73df657cf8000baf)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These errors have been occuring since the introduction of the 4.4
kernel with no apparent functionality loss. Whitelist for now.
(From OE-Core rev: 47b9058994f15507fc18ce0b08ac82a4c052966e)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These errors can't be fixed without adding the firmware to the initramfs
and building it into the kernel, which we don't want to do for
genericx86-64. Since graphics still work acceptably without the firmware
blobs, just ignore the errors for that MACHINE.
(From OE-Core rev: d73a26a71b2b16be06cd9a80a6ba42ffae8412c4)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using kvm can provide significant speedups when running qemux86* machines
on an x86* host. Enabled by using the new QEMU_USE_KVM variable.
[YOCTO #9298]
(From OE-Core rev: ebac2c8d1fcd09ebce0659a4abb445e4f1c18571)
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the enhanced functionality, the term "compression" is no longer
accurate, because the mechanism also gets used for conversion
operations that do not actually compress data.
It is possible to remove this naming problem in a backward-compatible
manner by including COMPRESSIONTYPES in CONVERSIONTYPES and checking for
the old COMPRESS_CMD/DEPENDS as fallbacks.
[YOCTO #9346]
(From OE-Core rev: 9d68c024790850cab72ead1e3372a5fcec4ef7b0)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
grub-editenv edits the env block at runtime on a booted system. Other
tools can depend on it to configure a live system, for ex. to set next
boot mode upon reboot. By splitting grub-editenv, tools don't have to
depend on the entire grub package (grub-editenv just edits one file).
(From OE-Core rev: 24b832b6e31c4e358d0c7a0062b69f66469cdcee)
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj
Richard Purdie
Maxin B. John
California Sullivan
Jonathan Liu
Scott Rifenbark
Joe Slater
Paul Eggleton
Jérémy Rosen
Bruce Ashfield
Bill Randle
Patrick Ohly
Alejandro del Castillo
Dengke Du