Currently fontconfig support is autodetected. It is better to be
deterministic. Since qtbase-fonts is not installed where fontconfig
will find it, it seems that current users are not using fontconfig.
Signed-off-by: Philip Craig <phil@blackmoth.com.au>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The proper 'virtual' name for EGL is virtual/egl, not virtual/libegl,
as per meta/recipes-graphics/mesa/mesa-common.inc.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* 0002-Fix-null-pointer-access-in-QQuickVisualDataModelPriv.patch is
applied in newer SRCREV
* 0001-Fix-wrong-calculation-of-viewPort-for-transitions.patch is still
pending
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* 3 backports from newer qtdeclarative:
System Hang while moving App Ribbon
Fix for segfault in some ListView Cases
Make use of BGRA texture format to improve image upload time
* 1 pending fix:
Fix for ViewTransitions not working in horizontal ListViews
Signed-off-by: Florian Haenel <florian.haenel@lge.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
0018 - Offset support for QOpenGLPaintDevice is required for
speedup WebKit hardware rendering.
0019 - Fix FBO restoring in QOpenGLTextureGlyphCache
Jira task
0020 - Uses right texture format to exclude extra convertion.
Signed-off-by: Alexander Irhin <alexander.irhin@lge.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
- fonts were not installed (at least in qt 5.0.2) so install
them manually.
- split the font package in smaller package as done in qt4 to
save space on the target.
- use OE_QMAKE_PATH_LIBS which corresponds with:
mkspecs/features/qpa/genericunixfontdatabase.prf: fonts.path = $$[QT_INSTALL_LIBS]/fonts
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* WARN: because these modules weren't released yet, we need to make sure to
use SRCREV compatible with selected PV for other modules, old revisions
were compatible with 5.0.[01], I need to test these new SRCREVs to test
git versions
* tested with 5.0.2 and 5.0.2+git%
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* all patches applied in recipes should be also applied in
https://github.com/meta-qt5/qtbase branches to make it
easier to upgrade to new version without loosing any
patches
* apply:
0013-Disable-mkv8snapshot.patch
0014-enables-tslib-device-to-be-read-from-env-variable.patch
0015-qtbase-allow-build-of-examples.patch
also for git version, only
0016-configure-add-tslib-support.patch
is now 5.0.2 specific (similar patch already applied in stable branch)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* maintaining 4 different versions requires a lot more testing of
changes in .inc files and we have only one version of modules without
release (only one _git.bb) and it's impossible to find SRCREV which
would be compatible with all 4 versions.
* 0005-AddSynchoronization-qimagereader.patch was already backported to
5.0.2 in upstream
* 0001-Flickable-Fix-bug-when-flicking-twice-using-touches.patch was
already applied in 5.0.2
* 5.0.2 is now default version (based on DEFAULT_PREFERENCE and in
qt5-versions.inc
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
- the tslib support is not enabled by default and configure doesn't have any option
to active it, so add the option to the build system,
- patch tslib support to get the device from the environment variable
(patch taken from https://github.com/prabindh/qt-configs/blob/master/qt5_1.0_Feb13/tslib.patch
- provide variable to enable tslib support in a bbappend (disabled by default)
- tested on an i.MX5x target with qt 5.0.2
TODO : test with 5.0, 5.0.1 and _git
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
- fix v8 segfault (at least on armv7)
- examples are only provided as sources but in our case, binaries
are more interesting for user to test the features on the target.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* drop Change-Ids, add Upstream-Status
* 0010-qmake-property-rename-QT_INSTALL_CONFIGURATION-to-QT.patch was
rejected upstream, 0007 was only in meta-qt5/qtbase repo, but wasn't
used in recipes
* 0004-Disable-mkv8snapshot.patch and
0005-AddSynchoronization-qimagereader.patch are special, because they
are applied only to 5.0.0
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* returning QSettings even without existing qtconfig was causing,
e.g. QLibraryInfo::location(QLibraryInfo::PluginsPath) returning
"`pwd`/plugins" instead of correct "/usr/lib/qt5/plugins"
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* and move it to separate .bbclass which is easier to
replace in distro layer when you don't care about
conflicts with qt4
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* endian option was removed from configure
* arch/host-arch option is now deprecated and configure shows
warning when it's used
* both are now autodetected
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* makes it easier to change desktop gl to gles2 in .bbappend
* we cannot explicitly disable opengl with -no-opengl, because then it
fails to build (probably only when mesa headers are found in sysroot)
/qtbase-opensource-src-5.0.0/src/platformsupport/eglconvenience/qeglplatformcontext.cpp:62:72: error: 'QPlatformOpenGLContext' has not been declared
/qtbase-opensource-src-5.0.0/src/platformsupport/eglconvenience/qeglplatformcontext.cpp: In constructor 'QEGLPlatformContext::QEGLPlatformContext(const QSurfaceFormat&, int*, EGLDisplay, EGLenum)':
/qtbase-opensource-src-5.0.0/src/platformsupport/eglconvenience/qeglplatformcontext.cpp:69:70: error: invalid static_cast from type 'int*' to type 'QEGLPlatformContext*'
The same with 5.0.2
Signed-off-by: Simon Busch <morphis@gravedo.de>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* we're using QT_DIR_NAME subdirectory mostly to prevent conflicts with existing files from qt4
but setting it in all OE_QMAKE_PATH_* variables causes all apps which are just using qmake to
build to install e.g. in /qt5 which for stuff like qterminal or something doesn't
sound right (as long as there isn't qterminal4 and qterminal5 recipe)
* some variables are kept with default QT_DIR_NAME, e.g. qml, imports, plugins we can assume that
every application which installs some QML files will install them in location shared by all
* add qt5-native.inc which also adds this QT_DIR_NAME and common
inherits (later will be used also by qtwayland-native.inc)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* "${B}/*" in quotes doesn't match anything, better to remove whole directory
(incluing .files) and recreate it
* not sure why I've added quotes after testing first version, we don't
expect B with spaces.. but I'm a bit scared with rm -rf ${SOME_VAR}
after one glibc upgrade cleaned my whole disk and attached NFS array
when OLD_LOCALE_PATH wasn't detected correctly...
* qmake works well with separate B, use it by default
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* exports are still needed at least for qtbase configure script (which
is using our special eval variant of getQ(X)MakeConf functions
but maybe we should move them only to qtbase now
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* not all modules depend on qtbase, qtbase-native dependency is added
by qmake5.bbclass:
QT5TOOLSDEPENDS ?= "qtbase-native "
DEPENDS_prepend = "${QT5TOOLSDEPENDS}"
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>