In the target sysroot of an SDK we can have target system absolute links
which don't make sense. This adds a script which fixes them up to become relative
paths instead.
[YOCTO #5020]
(From OE-Core rev: 57d6bdcad55c119e9ab8089d23d462436a0e4440)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As Mesa refuses to compile if the "opengl" DISTRO_FEATURE isn't enabled,
mesa-driver-swrast has to be conditional in the QEMU machine defintions too.
(From OE-Core rev: 9951e1da6a755f9a46d3a595aa4c2f975aee8f46)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The iso and hddimg share a common concept of 'live image', and they
use the same initramfs and thus the same init. However, that init
script in initramfs made a wrong assumption that the rootfs image
was read-only by itself. This is apparently not true for hddimg.
To make things work as expected, this init script should at least
distinguish between a read-only rootfs image and a read-write one.
This patch adds this ability to the init script. After this change,
the init script would be able to check whether the rootfs image is
read-only or not. If the rootfs image is read-write, the image will
be mounted and then booted directly. No union mounts will be attempted
in this case.
[YOCTO #5164]
(From OE-Core rev: 29f869b68a9017502f75915784a924f0fe9d4be1)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Exclude midori from mips64 temporarily. Becuase midori depends on
webkit-gtk which could not build for mips64 with 64bits userspace now.
[YOCTO #5141]
(From OE-Core rev: 1b0602b5933b3ee8e4ae36d447bf881308528a47)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By using os.path.dirname(systemd_unitdir) we get the correct /lib directory instead of
dealing with possibly multilib directories. This address a QA Error for shipped/not
installed /lib with multilib and x32.
(From OE-Core rev: 5b451a46550ba62e2fbfe5dbe50723b34a4fd527)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe installs systemd_unitdir and it is a non-systemd build than
systemd.bbclass deletes systemd_unitdir (/lib/systemd/) but not
base_libdir (/lib). In this case if base_libdir is empty than following
QA Issue is reported.
ERROR: QA Issue: openssh: Files/directories were installed but not shipped
/lib
If base_libdir was installed due to systemd_unitdir installation than for
non-systemd build it should also be removed.
(From OE-Core rev: c700cb21c189e23a78f0efaaf763259c8cfefa4d)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't hard-code full package names in SYSTEMD_SERVICE_*, because in multilib
they'll be changed.
[ YOCTO #4803 ]
(From OE-Core rev: 013cc8b6397c29e8f0d7adf63d8e06caab778da2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we enable "ptest", populate_sdk fails with the following error:
# bitbake core-image-minimal -c populate_sdk
..
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies
for dbus-ptest-dev:
* dbus-ptest (= 1.6.10-r0) *
* opkg_install_cmd: Cannot install package dbus-ptest-dev.
Disable that dependency.
(From OE-Core rev: a59b7341d136bf8ee4a22c2968ca95dc17be3947)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So far the rules of check_requirements() is too strict to lead mismatch
when empty lines exist in volatiles.
(From OE-Core rev: 71ab9ee58b0ba5e3f5cbf403d1b8fb79fc7f5ed1)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 637e0484ea4e7a39ac4d9c407c585201e6be1bc0)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping to the 3.10.11 -stable release. Of note in this update is
the timer_list fix, which broke ssh access in the previous 3.10
series of updates:
timer_list: correct the iterator for timer_list
commit 84a78a6504f5c5394a8e558702e5b54131f01d14 upstream.
With this, we can revert the two temporary fixes for timer lists.
ssh access has been directly tested after this update.
(From meta-yocto rev: 0237c97dde39a3b9355f7be9a9e8eab901d6f511)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This script was modified to check whether $ID_FS_TYPE is empty before
automount, however, for cdrom devices on qemu, the ID_FS_TYPE is not
set, yet the device should be mounted. Otherwise, when booting an iso
image with runqemu, the boot process hangs at 'waiting for removable
media'.
This patch fixes this problem by first checking whether the block device
is a cdrom.
[YOCTO #4487]
(From OE-Core rev: 2df21a3b27543df912a3ce05bef2415fae13cb7c)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change ensures that the SRC_URI is set before base.bbclass code is called. This will
also ensure that the xz-native depends is set correct.
[YOCTO #5127]
(From OE-Core rev: 787335494dc0a3f93d9bf5a6cf1b603c8675df66)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using TARGET_OS can add the ABIEXTENSION so ensure that is is removed for the Linux
TARGET_OS, we might have other TARGET_OSes so don't hard code CMAKE_SYSTEM_NAME
[YOCTO #5145]
(From OE-Core rev: 7d8b700242b1b32c6b6d0735b497701800f54fc4)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, adt-installer allows only the installation of qemu target
sysroots.
The changes in this patch do the following:
* add a new setting in adt-installer.conf (YOCTOADT_TARGET_MACHINE) for
each target architecture. For example, for arm we can choose to use a
qemuarm sysroot or a beagleboard sysroot. By default, only the qemu
target sysroots are selected (current behavior);
* change adt_installer scripts to allow installing the correct
meta-environment package for the selected machine;
* remove some left-over commented lines;
* use packagegroup-cross-canadian-${MACHINE} when installing the cross
canadian packages instead of doing it separately for each package;
* change the opkg config files in order to be able to find the
packagegroup package, which is allarch;
[YOCTO #4783]
(From OE-Core rev: 02085d410bf734e833d45293f4d5b06bb9536a60)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
packagegroup-cross-canadian package name was changed to contain MACHINE.
Make the necessary changes here too.
[YOCTO #4783]
(From OE-Core rev: 8f8cd338faf63f665c2214f0110b712736f8ed5d)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since packagegroup-cross-canadian package name has MACHINE in it, make
the necessary changes here.
[YOCTO #4783]
(From OE-Core rev: 23531590d40acde2775b7c3b90682edc501d68f4)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since meta-environment package name was changed to contain MACHINE,
change packagegroup-cross-canadian package name too, in order to be able
to select the proper environment files for a certain machine.
Also, remove the RPROVIDES since adt-installer doesn't really need it.
[YOCTO #4783]
(From OE-Core rev: d713447dc2fab8900f47c542cfbbb76bad19a7e2)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, the package name contains just the TRANSLATED_TARGET_ARCH.
When compiling the toolchain for two machines, belonging to the same
architecture (for example: qemuarm and beagleboard), this package gets
overwritten and adt-installer repo will contain just one
meta-environment package... This leads to situations like installing the
toolchain for qemuarm and end up with meta-environment package with
beagleboard cpu options.
[YOCTO #4783]
(From OE-Core rev: 09a2b158818e2ec3c3e3b53b6d14fd3527c32c99)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping to the 3.10.11 -stable release. Of note in this update is
the timer_list fix, which broke ssh access in the previous 3.10
series of updates:
timer_list: correct the iterator for timer_list
commit 84a78a6504f5c5394a8e558702e5b54131f01d14 upstream.
With this, we can revert the two temporary fixes for timer lists.
ssh access has been directly tested after this update.
(From OE-Core rev: 659528f0f99cec94991ec96fa124c4497237e9f8)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This upgrades the U-Boot based recipes for 2013.07 release.
This removes the 2011.03, 2011.06 and 2013.01.01 versions so we keep a
single one in core. The following recipes has been upgraded:
- u-boot (remove old versions)
- u-boot-mkimage (remove old versions)
- u-boot-fw-utils -> u-boot-fw-utils-cross (renamed and reworked)
The u-boot-fw-utils-cross recipe has been reworked as it uses the
UBOOT_MACHINE to find default environment for use so it is indeed a
cross binary and not a native one.
(From OE-Core rev: c5fff5748e0aaf7e135fdd464c2104b1d3cbfd5a)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
rpm macros should be independent of libdir
Fixes errors seen when multilib is turned on
it shows up since then libdir != usr/lib
(From OE-Core rev: 6126c6e4b9c40c222519914c8fe0a51f9eee8d41)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding an event to be fired when a scene task is completed.
It is analogous to the run task completed event, and has
been missing for some reason.
(Bitbake rev: 73b8f4d3fbeaf1b330a66d76012d0a5cef8dbe2d)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow builds without the opengl DISTRO_FEATURE by disabling DRI.
Also add new options for UXA (not default upstream, requires DRI) and udev
(enabled by default)
Finally remove a few obsolete dependencies.
(From OE-Core rev: bb9c01bd627cae9c037811c943ad38eebb2f8b25)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Stop mesa from building on distributions without the "opengl" DISTRO_FEATURE.
(From OE-Core rev: 05bacb69a3b0f3bbd9dd608855456c32b4007fde)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid parallel-tests for kmod as it remove
buildtest-TESTS and runtest-TESTS targets required by ptest.
(From OE-Core rev: e1a3ff7d455889e4c6b899227e8ca1919a443b22)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do_install_ptest_base task should have cleandirs flag, just like
the do_install task. The ${D}${PTEST_PATH} directory should be cleaned,
Otherwise, there would be similar errors like below if the
do_install_ptest_base task is rerun.
ln: failed to create symbolic link `xxx': File exists
[YOCTO #5129]
(From OE-Core rev: 25885d3b4f679c33a514d858bc20b0e21aa63721)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do_install_ptest_base function uses 'type -t' command to check
whether do_install_ptest is a function and acts correspondingly.
However, the 'type' command is a shell builtin and its behavior is
not all the same across Linux distros. On ubuntu, if we use #!/bin/sh
as the interpreter for the scripts, as in the case of our intermediate
scripts, the '-t' option for the 'type' command is not supported. So
the check always fails and the do_install_ptest function, even if defined,
is not run.
The same problem also applies to the do_configure_ptest_base and the
do_compile_ptest_base functions.
This patch fixes this problem by avoiding using the 'type' builtin command.
[YOCTO #5128]
(From OE-Core rev: d5a4f031b460437e9501e4e65194ce94d3641130)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
APM is not only obsolete, but also requires a kernel config enabled, which is not enabled by default
[YOCTO #5121]
(From meta-yocto rev: e25c43661f27b27e61aa7fae868237c1c60e3e25)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
APM is not only obsolete, but also requires a kernel config enabled, which is not enabled by default
[YOCTO #5121]
(From meta-yocto rev: 91e6d33135cc48aaf20a6138c050c6989af1f13a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There would be an race issue if we:
$ bitbake make-3.81 make-3.82
This because they are being built at the same time which would cause
unexpected problems, for example:
[snip]
ERROR: Package already staged (/path/to/tmp/sstate-control/manifest-qemux86-make.populate-sysroot)?!
ERROR: Function failed: sstate_task_postfunc
[snip]
Or there would be python's strack trace such as:
[snip]
*** 0004: mfile = open(manifest)
0005: entries = mfile.readlines()
0006: mfile.close()
0007:
0008: for entry in entries:
Exception: IOError: [Errno 2] No such file or directory: xxx
[snip]
[YOCTO #5094]
We can quit earlier to avoid this kind of issue when two versions of the same PN
are going to be built since this isn't supported.
(Bitbake rev: ab377c00c33a2d296bfda1b0b6c2a62b29d1004f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The runtime provider debug message is the same as the build time debug
message, make them different would be better.
[YOCTO #5067]
(Bitbake rev: 92b624cbc2711d3d859994099fb63918dfd0031a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
APM is not only obsolete, but requires a kernel config enabled and is meaningless for QEMU VM
[YOCTO #5121]
(From OE-Core rev: b0f8c47b1e808421f03308527beb8bde15644acd)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In exclusive mode, we need to complete the transaction for writes to make
it to the database. Therefore add sync calls to ensure this happens.
Autocommit mode is significantly (100 times) slower so caching the
data is of significant benefit.
(Bitbake rev: 4e55f7821786a59c2cd7dbd8bfa2a22f5f196e99)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For unknown reasons, the cmake class is using SDK_OS as the
target system OS. This makes no sense but only shows up as a problem
when you try a different SDK OS. Fix it to use TARGET_OS which is
the correct thing to do. For the vast majority of users this will
make no difference.
(From OE-Core rev: 57be84259f0885865c85d7bac350979430b956b5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some packages like grub have already stripped binaries e.g.
ERROR: QA Issue: File '/boot/grub/kernel.img' from grub was already
stripped, this will prevent future debugging!
ERROR: QA run found fatal errors. Please consider fixing them.
We would like to have a possibility to skip it using something like
INSANE_SKIP_${PN} = "already-stripped"
This adds the logic to do so
it acts at PN level and not at package level. so something like
INSANE_SKIP_${PN}-misc = "already-stripped" wont work.
(From OE-Core rev: 765982f4c050d9cd3eb608d630312da482c737c7)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the machine SRCREVs for the hardware reference boards to the
latest 3.10.10 and ssh fixes.
(From meta-yocto rev: 2aa6cc9d64fc22a8d0f02c5cf97440b634ba5e36)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In 3.10.x linux kernel, uImage can't be compiled by default. But zImage
has been supported by the latest u-boot, so use zImage as the default kernel
image file. In u-boot command, use "bootz", instead of "bootm", to boot the kernel.
And add device tree files to support dtb in latest kernel.
(From meta-yocto rev: ff6b4ae23ccd14cefdb94c561160fbdc8344793d)
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the mpc8315e-rdb to the latest available yocto kernel.
Build and boot test on mpc8315e-rdb board with core-image-sato.
(From meta-yocto rev: 67088a41b1f2222ffceba40928ebce87b9bff180)
Signed-off-by: Kevin Hao <kexin.hao@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The genericx86 and genericx86-64 machines share a great deal in common
in terms of machine features, required packages, etc. Use a common
include file to simplify changes to both machine definitions and avoid
accidental omissions.
Replace the hard-coded XSERVER assignment with the XSERVER_IA32*
defines from ia32-base.inc.
(From meta-yocto rev: c70ee30da060173f51e8dba72069052ecff389b5)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Ross Burton <ross.burton@intel.com>
Cc: yunguo.wei@windriver.com
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some machines provide several possible configurations and until now
there was no easy way for user to override the default setting.
This class provides a system similar to PACKAGECONFIG but for
U-Boot. The format is:
UBOOT_CONFIG ??= <default>
UBOOT_CONFIG[foo] = "config,images"
There are two possible parameters:
- config: it is used to set UBOOT_MACHINE
- images: it is used to append onto IMAGE_FSTYPES
Below there's an usage example:
,----[ i.MX6Q SABRE AUTO based example ]
| UBOOT_CONFIG ??= "sd"
| UBOOT_CONFIG[sd] = "mx6qsabreauto_config,sdcard"
| UBOOT_CONFIG[eimnor] = "mx6qsabreauto_eimnor_config"
| UBOOT_CONFIG[nand] = "mx6qsabreauto_nand_config,ubifs"
| UBOOT_CONFIG[spinor] = "mx6qsabreauto_spinor_config"
`----
User can, from local.conf or environment, use UBOOT_CONFIG=nand and
override the default setting, as:
,----[ Override example from command line ]
| MACHINE=imx6qsabreauto UBOOT_CONFIG=nand bitbake core-image-base
`----
(From OE-Core rev: 5dba521611d644357cf0a98d2e30dcf41777c6ef)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Ross Burton
Chen Qi
Kai Kang
Saul Wold
Muhammad Shakeel
Maxin B. John
Ming Liu
Roy Li
Bruce Ashfield
Laurentiu Palcu
Otavio Salvador
Khem Raj
Alexandru DAMIAN
Tudor Florea
Paul Woegerer
Robert Yang
Liming Wang
Kevin Hao
Darren Hart