We need a jffs2/ubi depending on the age of the hardware and
maybe a tar.bz2 so we can easily inspect an image without
playing with mtdram. We almost never need a ubifs and certainly
not a cpio.
The DISTRO_FEATURES_INITMAN variable has been removed, use
VIRTUAL-RUNTIME_init_manager which is still present. We have
already defined the later in our poky builds
systemd-compat-units does not install any files anymore and
the machineid and other scripts are gone. We want to continue
to install the alignment file though.
This has not been tested on dora systemd yet.
In dora there is no autotools-brokensep bbclass. So let's just
set the build directory to the source directory ourselves. I have
not built the package for dora though/
Poky dizzy is more strict with -I/usr/include and the old
tcpdump could pick-up "/usr/bin/pcap-config" from the host
and fail. Just upgrade to a newer version of tcpdump and be
done with it.
* the entry "option subnet" takes the
subnet mask not the subnet address,
while the busybox dhcp-client was
fine with it, the isc-dhcp-client complained with
Error: an inet prefix is expected rather than "10.23.24.113/10.23.24.0".
WARNING: QA Issue: ortp rdepends on libcrypto, but it isn't a build dependency? [build-deps]
WARNING: QA Issue: ortp rdepends on libssl, but it isn't a build dependency? [build-deps]
We used asterisk to be able to speak SIP with the outside. LCR
has gained this capability in the past and we haven't used asterisk
in more than two years.
Asterisk doesn't seem to compile with master/dizzy and there is
little point in figuring out why.
* bump the PRINC
[holger: Depending on some global settings /var/log will be a
symlink to "volatile". But when we log to a file we want it to
be persistent. So make sure /var/log is not pointing to volatile
but a real directory]
The concept of directdisk image is overhauled as we are now
having a initramfs that can flash the next image through USB.
The dedicated E1/IP images are rarely to never used and did
probably bit-rot. For the next time we provide such a system
we can simply (write a script to) install the additional feed.
CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS was set to '-n' which means
"Exit with failure if lease cannot be immediately negotiated."
What we'd rather want is for udhcpc to continue to run until a lease can
finally obtain. Otherwise we have a race condition in case the DHCP
server is not reachable for a few seconds during system boot, and end up
having a system that is permanently without an IP address.
This fixes ORT#639
The line doesn't have the signalling type set yet. It will be set
_after_ the rsl connection is considered up. This is addressing
RSL Connection failures like:
<0001> oml.c:1026 Rx IPA RSL CONNECT IP=1.2.3.4 PORT=3003 STREAM=0x00
<000f> input/ipaccess.c:921 cannot create RSL BTS link: trx_nr (0) does not refer to a signalling link
<0001> oml.c:1030 Error in abis_open(RSL): -22
<0001> oml.c:341 Sending FOM NACK with cause Message cannot be performed.
Without inheriting pkgconfig the PKG_CHECK_MODULES macro can not
be expanded in dizzy. Fix it. While being there use "autotools"
for the pcu and not autotools_stage.
We have changed the strategy to support multiple BTS with a single
build but don't remove support from files that are used with Edison.
Linux 3.10 and systemd were not used with edison though. So we can
remove it. As the sysmobts-2050 extended the sysmobts-v2 build most
of the -sysmobts-2050 changes are not needed anyway.
Fix the build by using a newer version and change the PR to be
a proper version number. I havent' checked if upgrading is possible
but is not a big concern right now.
Holger Hans Peter Freyther
Henning Heinold
Daniel Willmann
Harald Welte