These changes are the second edit pass for the new section.
There are some minor changes.
(From yocto-docs rev: 6c81617a2782d2f02d4900a68dd4e8c6eeb70fa1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General edits up through the BSP and Kernel overview sections. I also put
in place holder text and began on the application development over
section.
(From yocto-docs rev: 9c1b681ff253b469bffc355f0a938643997d85d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is an example whose output exceeds the PDF manual version's
page width. I had to artificially break the line up.
(From yocto-docs rev: d8a5714a2f8193c1efc8a7080b8f6e0744da610a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to the dev-manual-model.xml chapter for general improvements.
Also had to update the figure that shows the kernel development flow.
(From yocto-docs rev: 2aacccb03d167eac74a1b45c39a9edac160efc7f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note indicating where you can find the maintainer for yocto
code. Suggestion by Robert Berger.
(From yocto-docs rev: 8e55cc4c460582964b0267b4f43c14e7100f17fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
somehow I lost three or four changes that are credited to Robert
Berger (Community Member). I have re-introduced them here.
(From yocto-docs rev: a23564ada0e072bea63739aeb1eb5c66d595e728)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I provided a link to the OpenEmbedded wiki page created by Mark Hatle
that provides good guidelines on how to create well-formed commit
messages.
(From yocto-docs rev: ea7b0100a7b45c369cb67daa0705dcc5acef40c8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General pass-through for consistency in referencing sections.
Also, added Darren Hart's review comments for the "Submitting a
Change" section. I added more about the mailing lists and how to
submit a proper commit message.
(From yocto-docs rev: d9c8f5db8c862b1be724915cc43da6d12b88b97d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the mailing lists to be more specific and to be formatted
differently.
(From yocto-docs rev: 50b5cf2d331b120cfa9de0ba77ea1da1240d42e4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied consistent section referencing formats. Also cleaned up some
terminolgy for the YP Git repo.
(From yocto-docs rev: fa3cbb835b61158357d3f6fb9ebe017b9ba405cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some indentations applied. Also, a few minor changes to some
wordings.
(From yocto-docs rev: a166f41a5bbf3590d8a2fabbee267bdd190f19dd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I needed to reference the image differently for the pre-built section.
(From yocto-docs rev: 10568a0a8c4160af995089e481ccc2772e81d805)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a final scrub of the manual. I updated all examples and links
to be current for what I think will be the 1.1 release. I also added
some cross-referencing into the YP dev manual that now exist.
(From yocto-docs rev: 4c10b0e04856817a1d03aee7a9ed6e4d5d73a3ac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes reflect corrections resulting from Jessica Zhang's review
of the sections.
(From yocto-docs rev: c3fed39bc3909c38424e7e72c40471dcb0053c8d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After working through this stuff I was still confused as to how to
guide the user toward proper toolchain installation and on what they
needed to do for collecting their kernel and filesystem images.
These changes included some information on when and how to extract
the rootfs when the user is booting to NFS. Plus some other
general items like the significance of meta-toolchain-sdk as
compared to meta-toolchain.
(From yocto-docs rev: 2cc88b5193888a074ffd87cb253b9cfe08146877)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had definitions for "The Yocto Project Files" and "The Yocto
Project Build Tree" in this chapter. They were misplaced. I have
deleted them and moved them to the development manual.
(From yocto-docs rev: 9238e75abc4578043fd625b3796b86d42204e16f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the terms "Yocto Project Files" and "Yocto Project Build
Tree" into this development manual. They were previous defined
in the ADT manual. It makes more sense to have them where with other
terms.
(From yocto-docs rev: 2133110fd280db8cfbe998e6b46cdee0b260e777)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made changes to the section titles so they have quotes around them
for easier reading in the PDF manual.
(From yocto-docs rev: 5bea470682c3d834f30ab0d2fcba148ea33d653f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a development writer note and I noted that running a project
as an eclipse application pops a new instance of Eclipse.
(From yocto-docs rev: 6408ff7f4d59a0e535e560c7c0c63a3f373c640b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a couple of writer notes for development purposes. I also
formated the section title references so they have quotes around them
for easier reading in the PDF verison.
(From yocto-docs rev: 37adb580cf6c1369da43fc4ef7aaa4cc1cee0e5c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fixed some section naming conventions and minor wordings.
(From yocto-docs rev: 768d386c135c57ed3573e08bac72cad47fa101ce)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The information in the "Contributions" section has been migrated to
a "Submitting a Change" section in the YP Development Manual.
I re-wrote this section here to simply make a general statement
about how you can submit a change and then provided a reference
link to the appropriate section in the dev manual.
(From yocto-docs rev: 038caebb2815a8f09d35e99d5a2a0be76b05cacf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on submitting a change was very sparse and incomplete.
I have significantly upgraded this section to provide more details.
(From yocto-docs rev: af43bb1e4902c45afb5ac4b0f099877acd7a81a2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made several edits here. There is some mystery as to which changes
are actually part of this commit. I did a 'git diff' and am only seeing
one small change. If I later find they are not there I will delete the
file and replace with a back up I saved prior to submitting this commit.
(From yocto-docs rev: 62c63b3a812eaf92ca2bffa5714a6d327ac32d64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a type and also qualified the ability of YP as a testing environment.
(From yocto-docs rev: e158615eba04709e05cccaf29238bde6c9843671)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some clarification on the ability for testing. The wording as
it was implied that the YP provided a complete testing framework,
which is not true.
(From yocto-docs rev: e40b39179c69b69f012f231009131b1efa7e732b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered that in order to remotely deploy and debug an image from
Eclipse you have to have a Sato image. I added text to the note about
getting or building the image specifying that requirement.
(From yocto-docs rev: 060de7f6082bc3dbfa0f7d4e25b2933f15a61fc0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These edits are extensive and cross into two files: adt-prepare.xml
and adt-eclipse.xml. This is the first pass of a large re-write
to bring the examples up-to-date using the preferred version of
the Eclipse IDE (Indego 3.7). Much has changed.
(From yocto-docs rev: 57c1f905c6d66268a498e013193d003596f2303d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This bug was filed by Gary Thomas and was requesting more information
on the "hows" and "whys" of setting up your own package repositories.
At this point, I have added information to help the user understand
build performance issues when choosing between the RPM and IPKG packaging
systems. Likely, there is more that needs to be added to fully address
this bug.
For now, I added explanations in the packaging class and glossary areas
of the YP reference manual, a new paragraph in the YP QS just prior to
firing off a build, and a new bit of information in the configuring
PMS in the ADT Manual.
(From yocto-docs rev: d0025f862cb85ca741787b4737dca286e3ebfb45)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the variable name of the adt_installer.conf file that points to
the IPKG repo. This changed for 1.1. Also made some small edits.
(From yocto-docs rev: 893b8b2f4bed8d4fce9a876e2184b3f5b9b004c0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a link to the getting setup section of the YP dev manual for
help on setting up the YP files.
(From yocto-docs rev: 13832465de69bc41ddcc5e5696e707be8a3b6c5a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I performed general edits to this chapter as well as addressed the two
items for the YOCTO #1419, which was re-opened. These included
specifying oprofile version 0.9.4 required and the note that
oprofile-server is only installed by default in the core-image-sato-sdk
image.
(From yocto-docs rev: fdca6458d9cd431052126d31f6eb4396c3327982)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a pass through the manual and made some general formatting changes,
updated some links in anticipation for the 1.1 release.
(From yocto-docs rev: f2d3a012fbe4e8db3cf07e5497acfdf732e55d97)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the Crownbay uses both EMGD and non-EMGD statments in the
linux-yocto_3.0.bbappend file I had to do some explaining. It turns out
you don't really need to just delete or comment out the non-applicable
statements.
I also adjusted some wording around the tuning file example. This file
I assumed was in the conf directory of the meta-crownbay directory.
It is really in the meta/conf/machine/include directory.
(From yocto-docs rev: 3f82656f7ffb392333f8cf59abf1414af5da512b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jim Abernathy ran into an error in the BSP example. The error had the
BBFILES_COLLECTIONS_mymachine in it (incorrect). It needs to be
BBFILES_COLLECTIONS.
(From yocto-docs rev: 267a385aa5ab0eb46cf583db418cbbcab1e8b89b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren provided me with some feedback on the logging mechanism
section for both Python and Bash.
(From yocto-docs rev: 7dddadf8caba01d3ef1046be52a1435eeaed60a3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dave Stewart said that good coding practice is to set the variables
before any print statements. So I moved one statement above the
example printk statements.
(From yocto-docs rev: bad0537a5a6472fb3fef06de9763990a0c352e25)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Feedback per Dave Stewart added to clarify which two important
configuration files need editing.
(From yocto-docs rev: f37ade7f0d31ae6284c3bfee184c88b523f5fe69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
these are new figures to support the "Modifying the Kernel" conceptual
section.
(From yocto-docs rev: 1a0ecc104479b54a8122e3de2b30694fac8d7e73)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Complete re-write of this section based on feedback from Dave Stewart.
Dave's comments centered around not being able to understand the overall
concepts of the Git repositories, the source areas on the host, etc.
I have added several illustrations and written around them to try and
better explain the kernel storage system in Git used by YP and how
that tranlates into host-resident code that the developer ultimately
uses and the Poky build system uses for the build.
(From yocto-docs rev: 4e37f68f77261f6519426fb81ba407c456f8d1a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added 'xterm' as a required package to both Debian-based and RPM-based
hosts.
(From yocto-docs rev: 0a933001bd8c546a5d4960842c5e897061d09369)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTO #1419: I have re-worded the informational bullet on the OProfile
tool to indicate that you must have version 0.9.4 or greater of the
oprofile-viewer in order to have usable data on the host.
(From yocto-docs rev: 44fabbf8015b9bb624a5d70336a4440bd73c2c34)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file used a lot of crown bay stuff that had gone old.
I have updated the sections and used the latest Crown Bay
files.
(From yocto-docs rev: 67b119d66bacd0870f18a124bacabf32d65b6f3b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This machine is out of date. I replaced both occurences with
"qemux86", which is more relevant to YP.
(From yocto-docs rev: 8fe6feccc25f594a444b5177d1192899b3cbdd9c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Day correctly pointed out that the usage comments in the Makefile
were not exactly accurate. The VER argument is necessary only if you
are going to publish a document to the YP website. I updated the usage
comments accordingly.
(From yocto-docs rev: dd033227af0f88e45b539b92be8f1321fcd4f975)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Per Darren's feedback on this new section I updated changes based
on his comments.
(From yocto-docs rev: a5bbba42ec0da5b2f83f7a64ac8eef466e9c89b3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a section in the YP ref manual that gives reference type information
on adding a machine. This type of information is detailed well in the
BSP example appendix in the development manual. I don't want to completely
eliminate the information in the YP ref manual as is suggested by the
910 bug. I think referencing it in the dev manual for now works.
(From yocto-docs rev: e55dd8228d1376c9df01e320163862ddf35a5156)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on how to contribute changes to the YP resides in this
development guide. I took additional information from the YP reference
manual and merged it into the section here.
(From yocto-docs rev: 945dd29417cf51044332114e499b08fe24ef3077)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The YP reference manual had an appendix that included reference or
resource information such as mailing lists, bugzilla link, and
IRC chat stuff. This type of information is best suited for the
introductory area of the development manual.
(From yocto-docs rev: a5576ed0d3360cdb32070ade6577cb7687923b10)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This chapter was quite old as it had not been touched since the original
Poky Handbook days. I re-wrote the sub-sections with today in mind.
(From yocto-docs rev: e59bede734a8fe3e9b41698e2b42ba487ec80595)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In general, the term Poky can be replaced by "the Yocto Project."
The term Poky can be used as a term for the Yocto Project build system.
I left it in place for a few areas where it was easy and would not
be confusing.
I also performed general rewrites for the FAQ.
(From yocto-docs rev: bb24bcf21311c68576fb8c3fec86ad8303f557f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was incorrectly referring to SRCDATE variables in a context that should
have been SRCDATE destinations.
(From yocto-docs rev: eb255d9369b5bb3905a586433d472fd100c737dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul sent me a bunch of minor edits and technical corrections
for the ADT, BSP, Development, and YP reference manual.
Most changes were taken as he submitted them. However, some
formatting conventions were not followed in the commits he made
to yocto-docs/paule/docs2. After merging them to my yocto-docs/master
branch I fixed some issues.
(From yocto-docs rev: 93f4ea2dee976448f623953e801a80d59736450a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -b option is not required to show the environment used to build a
specific package; usually the best practice is to specify the package
name alone.
(From yocto-docs rev: d59772fd7edd76dbc8018479c072badb591601c3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add note about specifying a full revision ID to prevent querying the
remote server on every parse
* Mercurial also supports this variable
(From yocto-docs rev: 47ce273dd751b0ae32b5c53310b6aedc4dade2ef)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These documents do not have titles when showing up on the website; set
the title tag value so that they do.
(From yocto-docs rev: baf958e3f49317689275b14dd31c6141f36c8c65)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add documentation of LAYERVERSION, LAYERDEPENDS and new layer priority
behaviour
* Improve some wording
(From yocto-docs rev: be7c10f3b8b35ff231e5974a48936e66fd49fcbc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-live and -directdisk image have been removed; add a tip about using the
live option in IMAGE_FSTYPES to build any image as a live image.
(From yocto-docs rev: ef7c508a4073c4f04c2368420e64a5d6620c8fbc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* xterm is now the default
* Konsole from KDE 4.x will no longer work due to changes in behaviour
(From yocto-docs rev: 031a619ca19dbc2011a4df7bba1c332f2770e15d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We really need to have LIC_FILES_CHKSUM in all of our example recipes,
because it is now mandatory.
(From yocto-docs rev: 76998b7c54246e0505cf01b21d65d04ab285f1f0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Document that LIC_FILES_CHKSUM is mandatory, when gets validated, and
improve some wording.
(From yocto-docs rev: ca878d7b0c84812ef29bbaf5894c96dd89500ec9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable was renamed (to match OE) in the Yocto 1.1 development
cycle.
(From yocto-docs rev: 5cda8fe3b5dd18b629ccd13427da3b5743ae66ce)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace the reference to this being the manpage.
(From yocto-docs rev: ebb689a8ccc2aaf5d21341c69899588e77d5172c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the references to the Poky Reference Manual to the Yocto Project
Reference Manual. I also changed 'poky-qemu' command to 'runqemu'.
(From yocto-docs rev: f46003eab91d1f682113b9e0672efd486a509ec6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The links to the lettered divisions of the glossary do not work.
I changed them to the first entry for each lettered area.
(From yocto-docs rev: b7692bcfa19fb940a050c0cf72dc2f7e427b8ba7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This appendix had poor organization. I re-organized it according
to configuration and recipe context. The sub-sections break out much
more nicely now.
(From yocto-docs rev: 7a3a7b3a7b4861122194ea0a78c16af531f0078b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the document, several variables state their default values. I set the
formatting to surround a default value with double quotes in all cases.
I also fixed a typo for "RECOMMEDNS"
(From yocto-docs rev: 3da85f54df6fd4ad64d5be2cc9ae0e6dd50a68f5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I also fixed formatting and some minor wordings.
(From yocto-docs rev: b1bbfe89cb250ef5267fb16635dc41338aab0c59)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the "Poky" references to "the Yocto Project" and performed
general edits where necessary.
(From yocto-docs rev: a7ef3e7d5c792bde5231b9302e614cb7b5db81b7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I swapped the Yocto Project for Poky throughout. Some other general
edits were done. I put in a reference to a spot to learn how to best
set the BB_NUMBER_THREADS variable.
(From yocto-docs rev: 2543a915957014a59e6c49a1cdde270725d47af3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I converted "Poky" to "the Yocto Project." I also updated several examples.
In particular the build/tmp/work example.
(From yocto-docs rev: eb82bc36904f502fb4f314ff05eb86cff27ce0b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The poky-beaver.png, poky-log.svg, and white-on-black-yp.png
figures are not used and do not need to be in the file structure
for this manual.
(From yocto-docs rev: c2217102813fc0a72922bf2baf24e07184cf24e3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a parallel textual construct at the beginning of each section
that details a directory in the Yocto Project file's structure.
I did not like starting these sections with a literallayout string.
(From yocto-docs rev: 5dde476f0c02d655217f3fa863522e8b7df57cda)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Converted to Yocto Project from Poky.
(From yocto-docs rev: 0263e8b29efeff051184ce1700da9559ea511faf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the profiling sections to reflect Yocto Project rather than
Poky.
(From yocto-docs rev: 4f2c3bc93d97a6a8676fdd14ff9061bb92bdf5c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added emphasis to a bulleted list and I also updated a section title
to reflect Yocto Project instead of Poky.
(From yocto-docs rev: f967aff5c0a0047ef44145c6a95da84e57c255b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-wrote and reorganzied this chapter to reflect the book as
a Yocto Project Reference Guide.
(From yocto-docs rev: ef3c3955ab0cedb57d9ae48041ed94806fe34001)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the title to refelect the Yocto Project and not Poky.
(From yocto-docs rev: 151c1925659e986b27866fed5abfcba96744b204)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Each of these chapters needed the title changes to reflect Yocto
Project and not Poky.
(From yocto-docs rev: a6d8d01b20af334ca9950c4287d61a728532f652)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General re-write to make the chapter Yocto Project friendly.
Weeded out the references to "Poky."
(From yocto-docs rev: ac4fc6082f458e5ee60962693ee332bbf1e3c1a9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTO #1001 - created a new section to address this issue. This is the
first draft. Darren to provide review comments.
(From yocto-docs rev: fc2aee572cc3e620684533a12a2d8436dc0abe32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not sure if I need to commit these again. They are showing up in the
git status command so I might have updated them and forgot to commit
them. Doing so to be sure.
(From yocto-docs rev: 75c87592c10647ec09f42a1363a8ae123cd6e33d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a comprehensive pass through this entire section that incorporates
understanding given to me by Scott Garman. I have added more detail and
text that helps the non-developer understand what is fundamentally going
on.
(From yocto-docs rev: 124c722ccf0316f6e62790ca77c88d0444559378)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a reference to the Image appendix for the description of
images. Also, added a new term "meta-toolchain."
(From yocto-docs rev: a9c1110ec7499afa669416c00bc81573fcbf920d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more general description of what this section's purpose it.
I felt it was missing some basic information and making too many
assumptions.
(From yocto-docs rev: 4a5faeecc616313147283e50fe947c68555f55a2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems that this manual should be named the yocto project reference
manual as we slowly try to rid ourselves of the "Poky" term.
(From yocto-docs rev: c9d30285adf83bbcfc06233be54aec4203cbfd13)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the PDF version of the manual the "‐‐" docbook statement
does not display correctly. I changed this to "--".
(From yocto-docs rev: b0596e0ce370d6c6e1680e89d9c5a5b9da26dd93)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the PDF version of the manual the "‐‐" statement does not
display correctly. I changed this to "--".
(From yocto-docs rev: ae3a5bc15d30668b6f9048245f70dcd82f89da32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In anticipation of 1.1 I have changes several filenames that
had "1.0" to include "1.1" instead. I am unsure if the names are
correct at this time. I will need to check them when the release is
created.
(From yocto-docs rev: ae50f920c5cf18f6c0494280a453feb41ef56d83)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the PDF version of the manual the "‐‐" docbook statement
does not disply correctly. I changed them to "--".
(From yocto-docs rev: 8aea27a6de1ca2d5dffc84cfb7a26d29c3eb0e8d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the PDF version of the manual the "‐‐" docbook command
does not display. I changed this to "--".
(From yocto-docs rev: b5f42fad0c7447a480e0557988f868ef4833abbf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are examples that use "1.0". i have changed these to "1.1"
in anticipation of the 1.1 release. At the time of the change I don't
know if the actual file names i put in are correct. I need to check them
when Beth sends me the real stuff.
(From yocto-docs rev: 3d5bd0bd38fd2d99e7d5cbb6bedf0fde0fdd5fa9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Errors caught by Robert P. J. Day:
1. An extra ">" character removed.
2. Overly long commands changed to use the continuation symbol.
(From yocto-docs rev: e84b7d5a46817fdc9c0f55242840989cbe8494c7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also added some general punctuation edits.
(From yocto-docs rev: e9a689655c6e88e735944084e5dda32800a6e6ca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Comment from Bruce Ashfield indicated that this statement needed to be
SRCREV_meta_pn-linux-yocto_mymachine ?= \
"84f1a422d7e21fbc23a687035bdf9d42471f19e0"
(From yocto-docs rev: 917bfca1af7f82ad330854849e0ec4f30289543a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this example uses the CONFIG_SMP configuration. By default, this configuration is
disabled. The example shows how to use menuconfig and explains the .config file
role and how you can use it combined with menuconfig to manage multiple configuration
changes.
Thanks to Darren Hart for identifying this simple change to demonstrate how to
change the kernel configuration.
(From yocto-docs rev: c571c01b8589ad6f76e66388c3ae24a1de029f65)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link does not exist yet.
(From yocto-docs rev: e74440f299eee8372090a749a301b10871eb297f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made several editing corrections for various terms and phrasings based on
Scott Garman's review.
(From yocto-docs rev: a21ba80151ce82683d45cd67ddb0728d779b007a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield suggested adding a note near the explanation of creating
a bare clone that suggests if the user already has a linux yocto kernel
Git repo handy they can reference that repo in the 'git clone --bare'
command rather than referencing the upstream source repository as
a way to speed up the process.
(From yocto-docs rev: 132a9cfcef3397677b54eace7831d25f8a321b93)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. now refer to the linux 2.6.39-rc1 as the 'latest upstream release
candidate available.
2. Noted where you can find the linux-2.6 kernel - in the meta-kernel-dev
area.
These changes were from Bruce Ashfield's review of an early version
of the Yocto Project Development Manual.
(From yocto-docs rev: 83d6e75e7d5f4d60040c4b7ebb0c7bb11b1b67e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield's review comments indicated that we will be using
linux-yocto-3.0 and not linux-yocto-2.6.37. So I am putting these
changes in to anticipate the 1.1 release.
(From yocto-docs rev: ecbe1c90c5aa65b2dde77ba6094b5956e37d061d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to set to scalefit="1" so this figure would appear correctly in the
PDF version of the manual.
(From yocto-docs rev: 166305f39859e11f15702a8f6eb1f5a524b589c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two additional section placeholders added for changing kernel
configuration and for adding kernel recipes added to the appendix.
(From yocto-docs rev: 27c0ea3dddb652c4367b097b612edbdb76d7725d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After getting the example in kenerl example appendix working I discovered
much that was wrong in this overview. The overview attempts to generalize
all the situations for kernel modification. These include code changes,
configuration changes, and the addition of new recipes. It also includes
the situation where a developer wants to gather all the changes into a
separate layer for distribution and for when they want to push them up
the tree.
(From yocto-docs rev: 5498d7b38d3a2f14befa82b66af9919a449e0f04)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some issues with the fact that the build process parses
all kernel .bbappend files whether they are used or not during the
build process. I added an extra build configuration note regarding
editing the .bbappend file. I noted that you either have to edit
every .bbappend file and comment out the COMPATIBLE_MACHINE statement
or simply remove all the kernel recipe append files except the one
you are interested in.
(From yocto-docs rev: ecece911a1623b9b12bb73bab50891fbdea7afbe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed 'linux-yocto-2.6.37.bbappend' to 'linux-yocto_2.6.37'.
Also started a new note.
(From yocto-docs rev: c78a937b9df37f68beee31c51914811ddd4d771f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed 'linux-yocto-2.6.37.bbappend' to 'linux-yocto_2.6.37.
(From yocto-docs rev: 0eb284374ef9dfb26142ae4d0254a0fe4056d0ab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to tweak the viewing area to get two figures to display
correctly in the PDF version of the file.
(From yocto-docs rev: 89b2618e11c05744f54a9fbd39cd899117a2affc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the figures/kernel-example-repos.png to the list of tarfiles.
(From yocto-docs rev: 8967a9b8ae6fb27f7c0aeb44c2d04eacba98ed81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This figure provides a conceptual look at the repos and file structures
needed to run the example. Or, for that matter, to get set up to
modify the kernel.
(From yocto-docs rev: d469449f1d416a6a96bdde297daae68a9f3094e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I performed a major re-write of this section that touched all
aspects of it. This was necessary due to the fact I could not get
the example running because of not understanding the repo location
and branch needs to set it up.
(From yocto-docs rev: 160e66d0c8ddf11584c53306def916a45a05f62b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I separated the section that explains how to set up the poky-extras
git repository. This used to be in the kernel area right after
creating the bare clone and the copy of the bare clone. I thought
it would be better as a stand-alone bulleted item.
(From yocto-docs rev: 4ea917c7218f238e2b0d2bb377a97f4b1f5eb1f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added instruction on how to set up a bare clone of the linux yocto
kernel files and then how to create a clone of the bare clone.
Finally added a part about setting up the meta-kernel-dev repository.
This setup should do it for those that want to modify the kernel and
not have to download source files from the upstream everytime they
make a change.
(From yocto-docs rev: 90ae8249d119d5db17507eea37eb6deb0822a682)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
still working on the kernel example.
(From yocto-docs rev: 90c8cb778d3c146f24626a681f05b88bab1e9766)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a new section for the example that ensures the image for qemu
is available.
(From yocto-docs rev: a3ca52cb7088ec85502b507093082f35f23befd4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I placed an anchor point in the Index of Downloads bulleted item for
reference from other documents.
(From yocto-docs rev: 7d4f96d20667fbf5f52e25840b39f1994b1c4cd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tightened up the section that talks about setting up the environment
and starting qemu. I just added a little more clarification on the
kernel-image variable.
(From yocto-docs rev: 54c037d45ca46c09544dae67793237c76a1205f5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the downloading the filesystem section to have an inclusive list
of image profiles and a reference to more information on that. Also
included more explanation of the two types of image tarballs.
(From yocto-docs rev: 14965cbedd719beb6191771c6dcb92742f4229bf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made some edits to the section that shows how to download a pre-built
qemu image.
(From yocto-docs rev: 89127522b09cc201008dc760f8b1397b5ff36e42)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the 'i686' stuff to 'i586' after seeing that it is named that
in the actual index of downloads area. I also tightened up the example
a bit.
(From yocto-docs rev: ab76e8f8aa3d8d24d1fd8ff3b7f8f175b8b8f663)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
various things going on in the kernel example. Far from complete.
(From yocto-docs rev: 0c0548b79589a606f91bdb39e5a2ece71f4c108e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section that describes how to get the local Yocto Project files
I was referencing the general section. I have added a more specific link
to the bulleted item that describes how to get these files.
(From yocto-docs rev: 2b03c4d39a83d731581a6cd63a5c9e5c7e4cb57b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the flow section for the kernel modification section I added a new
step for getting a local copy of the linux yocto kernel files. The section
indicates that you need a local Git repository of the files and then
references back to the Getting Started section for an example.
(From yocto-docs rev: 6601e06635c6f57ddbf8109cc1dfdc8a8e7f74af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section that shows how to get various groups of files needed for
using YP I added a bulleted item to show how to clone the linux yocto
kernel files. this section will be referenced from the kernel example
flow section and the kernel example appendix.
(From yocto-docs rev: 4126d1456290d677ab8dc1d02d11aac6eb8add46)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the user should use Git commands..no probably about it.
(From yocto-docs rev: 84b0b4e8c7b6b89c81503f40ba855e9f624887c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the image description list to the Yocto Project Reference manual
where it really belonged. Appropriate references were added.
(From yocto-docs rev: fc74439c09d1f45cdfbc24d972045e574ffa91ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list of images has grown. I added all images reported in the
1.1_M2 build using the 'ls meta*/recipes*/images/*.bb' command.
(From yocto-docs rev: 62e12a71c73a5e3a20c6887d754a96eb9e754b48)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made another edit pass through the high-level kernel modification flow
list. this is the list I will work from while trying to actually do
the task.
(From yocto-docs rev: ac9b2d8961abec9016c6c1e10222d0af36c4be4c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New flow suggested by Dave Stewart.
(From yocto-docs rev: 101a464f0f17f3816bfb32f6e3a5da714cc32a06)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the introduction paragraph to cast the chapter more for YP than
just generic newbie information. Also, added three screenshots for
the source areas at Dave Stewart's suggestion.
(From yocto-docs rev: 26d3c58ff6295515c593c8b0b12dc3d6952b752a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Character does not display in PDF version.
(From yocto-docs rev: 8f9b114190257cfe5425f6e322dcfb6f03941bf8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PDF version was not allowing the image to have enough room for proper
display. Increased to 8.5 inches.
(From yocto-docs rev: 425abd53eac41a9466af45e277be8b0d8202e27d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 696aa5b822cd0e52a9c67c0b3ea73f35f6e99983)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 5061f9e8b3cfb66b2ed17befc9c4c4d8b875f4eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 92eb8221bdaee94b3d5861b929ef1adb986cc865)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 1b729667498363a5bb451502975b0797796eea0b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 29426ab131a319b764f82da8a11cb4d9b590c3b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put the note about manual differences in the legalnotice area.
this produced a better looking note.
(From yocto-docs rev: 8d44a5fba7c52d5798758467e93c9c64e48d512a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 1675c31aa02a4daed356af4ea9c78d493a9a2597)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the BSP flow illustration.
(From yocto-docs rev: 82ec8528c058d702402767ffa471695eb82e259c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In dev-manual-model.xml I included two references: one to the
BSP Development Example and one to the Kernel Modification Example.
I had to add the target "id" stuff to both dev-manual-bsp-appendix.xml
and dev-manual-model.xml
(From yocto-docs rev: bcae1e723610e1769f0a524e3c1d9918c7cb1061)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No need for this chapter any longer. Re-org has ash-canned it.
(From yocto-docs rev: 085a514133f4326c1da372b95507a3665e8f91ed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the cases chapter and added an appendix for kernel example.
(From yocto-docs rev: 60c8ec3444c08e94468ff349b676652c7f6ff0cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the Docbook tags to make this an appendix.
(From yocto-docs rev: fd5658872a9d48a2ee8f0229cb0fca90961aee32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New file for the kernel example. this will be an appendix.
(From yocto-docs rev: fca7e4fbb3d1e738700349d6169d7217c04e4b31)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this is now in the model chapter. Eventually the cases chapter
will disappear.
(From yocto-docs rev: fde20eede9f04899b61742b05ce73c97b2737bf3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added structure to contain sub-sections for system (BSP and kernel)
and application overviews.
(From yocto-docs rev: 028f65219b001081d221d63f368ff06066a95a64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "models" chapter is going to be the overview section for the cases.
Thus, the cases chapter will disappear. This is a first step in that
direction.
(From yocto-docs rev: fe3985db8e1dbc7bff6565d3624bccac0f809621)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the more general BSP development information was more appropriate
in the dev-manual-cases chapter. I removed this information and left
example-specific (mostly) text.
(From yocto-docs rev: d44c0fa8bdea9a2cad51ae3ca4b861a12d9fcdf9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the BSP example is now in an appendix, I re-wrote this section
to overview the case.
(From yocto-docs rev: c0d88c6050bd17d65d8fe8c8abb227998fd4c11e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section for changing the recipes was deep and complex. So I broke
it into several sub-sections.
(From yocto-docs rev: f964b7644502fe5995c57de4a7a4fff47f71cf79)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-wrote the Getting your Base BSP section to reflect the example only.
Previously, there was a lot of information in there about getting BSP
files that was deemed universal and was moved to the getting started
chapter.
(From yocto-docs rev: addcbca37e3dfad27b388245a4085cd0a2747177)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the YP BSP naming scheme to the general getting started section
where it talks about getting BSP files on the local system.
(From yocto-docs rev: 5b8dc20a52053341ac726fe6662152397262d5e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the example for setting up meta-intel into the getting started
section. This information is universal and needs to be isolated.
(From yocto-docs rev: d43ecd16a95fa53cafa09e933c67cacd85227021)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the section that provides the universal methods of getting a local
version of the Yocto Project files and BSP files on the development system
into this section. this information needs to be referenced throughout
examples so it should be in one location.
(From yocto-docs rev: 718ea5b468d816ea4f61a6ffa4de7db396fe3ed4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the spacing to follow my indentation scheme for Docbook files.
(From yocto-docs rev: 6ed8cbc7dc48e5a380d27ee280fb92809b931223)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
added the start of the kernel example. It is not complete.
There are other various edits made throughout the chapter as well.
(From yocto-docs rev: 39ba857b71aa643593a539d979186753fb7a9049)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the list of files to include dev-manual-cases-bsp-appendix.
(From yocto-docs rev: 0756e69e25fb4008fae592f3e06b03b3d773e0a8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I decided to take the long detailed example of the BSP creation and
make it an appendix. This commit represents a simple copy of the existing
dev-manual-cases chapter. Further commits will change the text to
make it suitable as an appendix.
(From yocto-docs rev: 8c1308c4361f48ce7f7aa104cde7e6f6a820faa4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completed the terminology scrub for the yp files.
(From yocto-docs rev: c99f64541bf09ad7267625828894e3364dcdf937)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a pass through the chapter to try and lessen the confusion over
yp files in a git repo verses those unpacked from a tarball. Also
tried to write the example for the 1.1 release but I don't have the
real software yet and can't supply actual names of files.
(From yocto-docs rev: 2ad973bd1f17005a3922651060d025795634d222)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General edits to the workflow section. Also created a link to
to Bugzilla in the next section.
(From yocto-docs rev: 2e70b19d24bb4649fb525232fca9ab2e01c5ec61)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
created a new section on YP terms that might be useful to the new user.
(From yocto-docs rev: ab81b6468c39b5c015c7c0654ddf8c4cfd8bd245)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-wrote the source repositories section a bit to better reflect the
overall picture of how the user finds and decides on source for YP.
Also added some punctuation to the licensing section.
(From yocto-docs rev: 12ec18e58eb4e4dc395c2161908a60d395684ab3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have a new understanding of the files resulting from setting up
Git repos as compared to getting files from tarballs. I changed
some wordings to help make those distinctions.
(From yocto-docs rev: b7ba9df07cf9d64f61ac73e501c253c42570970d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed "complete reference guide" to "a reference guide."
I don't really believe the Poky Reference Manual will ever really
be complete.
(From yocto-docs rev: 9afcfe03e4f3595ac78f2cda111e5bd025654595)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These converted it to 1.1_M2. there were a lot of changes going from
the original example that used to bernard to 1.1_M2.
(From yocto-docs rev: c5dbc8da1ebc0b710e8133fcdd5893e33776148d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial stuff as I am working through the BSP example trying to
use git clone instead of git init per Darren Hart's suggestion.
(From yocto-docs rev: e829d761575786093c9ac1f1b901a2151011ce9d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Initial content in and the formatting complete. Some bad links fixed
also.
(From yocto-docs rev: 2461522b77c8240476a14aef8f3e94336419af56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Three issues pointed out by Robert P. J. Day.
1) Missing text for "This optional GNOME mobile-based UI, which is intended for
devices with resolution but restricted size screens ..." I re-wrote this
so it makes sense.
2) Scrubbed document for incorrect usage of openSUSE. There were three
occurences.
3) Made several changes to the example of using a pre-built image. The
arguments to the poky-qemu command did not exist (they were old). I
used existing arguments now and I also bolstered up the root filesystem
explanation a bit.
(From yocto-docs rev: 31b7a97dfd11ff50ee6c554bf8647591021fef72)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Syntax did not have line-continuation characters in the zypper
example. Error found by Robert P. J. Day.
(From yocto-docs rev: 4ecbd3d1706336ddc691bf4ce6763a179f3f70a6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the initial content for the chapter. Previous content was just
copied from an adt-manual chapter.
(From yocto-docs rev: 145fdacb2d080b97dc033f677fccb4fa5ab8e5d3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the dev-manual-model.xml chapter to the list of chapters
to include.
(From yocto-docs rev: 513faf68cdf338b28020119266148287ea459916)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This version of the content is a placeholder only.
(From yocto-docs rev: 3c896a95f2d6593ef8af3d90829611122bef9aae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This content is the first cut for the chapter. The original was a copy
of some adt-manual chapter.
(From yocto-docs rev: 4a563c3ed1e82837410ed114a07e39a0ccaad6f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original content of this chapter was simply a copy of an existing
adt-manual file. I have added the content for the chapter.
(From yocto-docs rev: cac53540d8449f605ab40775c317b613711f3a80)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New content from my working chapter. Previously this file was just a
copy of one of the adt-manual chapters.
(From yocto-docs rev: a50e69c19c23808d44ac4448b30394eedbbdbdab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the make was failing due to me not following a naming convention.
I renamed all the files so they have a pre-fix of 'dev-manual' and
then deleted the old files that had a pre-fix of 'dev-man'.
(From yocto-docs rev: a4157ece0d994d5f269c94fce71c0b598bfd6a9e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Toolchain filenames corrected. Discovered by Robert P. J. Day.
(From yocto-docs rev: 3afa1d71be04c6aedafe952855a23ccbd3547b68)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Was suggested that toolchains "should" be installed under /opt/poky.
This is in fact a requirement. I replaced "should" with "must."
(From yocto-docs rev: fe890b056831a84cde47f9200300491426f20c65)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copied from existing book and title changed.
(From yocto-docs rev: d522d738f527aac5449c7d7b60dd457c0e912c3e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example bitbake command now has the target core-image-sato.
This reflects post-bernard.
(From yocto-docs rev: 3ff1ee07947f301c4df2a9aea8d1aab15c5237eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
changed 'meta/recipes-kernel/kernel' to 'meta/recipes-kernel/linux'
as the location for existing YP kernels found in the repository.
(From yocto-docs rev: c8ce3a15429df5c980498ce217803cf5a59cbdc9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added text to help put tree construction into context with the developer.
The section felt as if the developer needed to be taking action on the steps
when in reality the steps are describing a lot of "behind-the-scenes" stuff
that happens when the YP tree is constructed.
(From yocto-docs rev: 1aafca94f3f3d5e07a0b2244ff5dbfe4a2c1ba8f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a sentence clarifying the intended audience of this chapter. It is
specifically for developers that want to modify the YP kernel and contribute
changes upstream to YP.
(From yocto-docs rev: 1012dcb8312cb83fe64397742142071f20ae4e24)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleaned up the list construction.
(From yocto-docs rev: 29dd0a40bf9844de631941b7f26d1181fd17c95b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section has been re-written to just include high-level overview of the
steps. The detailed example that used to be the section is not needed as
there is adequate documentation of this process in the Yocto Project
Development Manual and on the wiki courtesy of Tom Zanussi.
(From yocto-docs rev: 7355734a5ed965401027ba23bfb15fd926a171f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I forgot the 'git' part of the 'git push' command for the fix requested by
Robert P. J. Day.
(From yocto-docs rev: 458e18bd9d33c12ff3367cae8a4cc0c6c640b932)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes requested by Robert P. J. Day at rpjday@crashcourse.ca to add
a missing system prompt character and fix an overly long git push example.
(From yocto-docs rev: 71ac0b23682c6a405ae454cab02120993d2f370e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a partial edit of re-writing the BSP creation section so that
it is clearer for the naive user. It is not quite done yet.
(From yocto-docs rev: 7a552e72a1d2d1b6ffa93f4fe3074f318ff35715)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Poky Tree Mode" has been replaced with "Build System Derived
Toolchain". SDK Root Mode has been replaced with Stand-alone
Prebuilt Toolchain.
(From yocto-docs rev: 453f7c030e6d7625d382563e2f2ec569f76e95eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used clearer wording.
(From yocto-docs rev: faa35ea8cdb1747ba2b6b7717d1881830bed175b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated wording to reflect proper use of build tree terminology.
(From yocto-docs rev: 82b47279b55b6d15bf260e0903505fe578c985c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the command examples so the variables contained underscore
characters.
(From yocto-docs rev: 34bfceb14a04c5fa026486f33d32df7c21f8c742)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Armed with a better understanding of sysroot I made some edits to
help better define what is going on with the various sysroot
variables in the adt installer configuration file.
(From yocto-docs rev: 2b63e1f0f57c701eb38de7f9b9057567786b9899)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Small correction to refer to sysroot instead of root filesystem
in opening paragraph.
(From yocto-docs rev: e9af5bbd69ab9421a97ce87d5210d31838e93151)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The note indicating where you can get sample kernels and
filesystems suitable for QEMU had a wrong path. I added
"machines" to the path. Also made a wording change.
(From yocto-docs rev: 75261eb7a44dcc990a817b5b59323042c38b6839)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example command I used to setup the cross-toolchain environment
was incorrect. I added the "1.0" to it.
(From yocto-docs rev: b8bb60ec69296e9c927735f3fca86013e8b2624e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Significant re-write to every section in this chapter except the
"Setting Up the Environment" and "Kernels and Filesystem Images"
chapters. I established some terms to communicate the build and
source trees and the build and source top-level directories for
YP. These terms had not been consitently communicated. I also
stepped through each of the three methods by which a user can
install ADT (and the cross-toolchain) and meticulously documented
the steps. The result is a much more complete and clear set
of procedures.
(From yocto-docs rev: 37076a07ccc748ceb416c4bc3a57b698f6e8d80a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>