I discovered some artifacts and inconsistencies with how the YP
Quick Start was made. I made the following changes:
1. Changed the structure of the QS from "article" to "book"
as it is a separate book. This change doesn't fix anything
but it does bring the XML file closer to passing validation.
2. Removed the <abstract></abstract> tag. This tag was in place
simply to display the PNG file for the Yocto logo in the upper
right part of the first page. After turning the QS into a
book from an article, the title could be displayed as a PNG
file similar to the other books. This change solved two issues:
1) removed the empty "abstract" element from being displayed in
both the mega-manual and the PDF version, and 2), brought the
author and look of the first page into line with other YP
manuals.
3. Removed the old PNG file used to display the Yocto logo at
the top of the QS. This file was removed from both the
yocto-project-qs and mega-manual "figures" directories.
4. Added a new "yocto-project-qs-title.png" file to both the
yocto-project-qs and mega-manual "figures" directories.
5. Updated the "qs-style.css" file's .authorgroup element to
match and behave like the other YP manuals. This effectively
correctly displays the title PNG file for the QS.
6. Updated the Makefile area where the TAR files are made for
both the yocto-project-qs and the mega-manual. I had to
substitute in the new PNG file for the QS one and had to
add the title PNG to the mega-manual part.
(From yocto-docs rev: 914c482bd89071ab34b3381e3bd8065f871cc047)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The DocBook type at the top of the file indicated chapter
when the actual block of XML is article. I changed it to article
to be consistent.
(From yocto-docs rev: 5350426c11abc2fa4b1418a2d215cd8814745ef9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upon inserting a USB stick or similar device, mdev will run
an automounter script that mounts valid partitions on
/media/<device>. The script first checks /etc/fstab entries
so that mounting on UUID or LABEL or using custom mount options
is still possible. If /etc/fstab does not contain particular
mount options, the script will create (and remove) the mountpoint
automatically.
The script also supports full disk partitions (devices without
partition table).
The following environments can be set in /etc/default/mdev:
MDEV_AUTOMOUNT=n (Disables automounting completely)
MDEV_AUTOMOUNT_ROOT=/media (Change the mount root location)
Automatic mounting for a particular device can be disabled by
creating a file "/dev/<device>.nomount". This is helpful in
scripts that create partitions for example, and want to perform
specific actions which require the device to remain unmounted.
A more complex variation (using LABEL based mounts) on this script
has been in use in OpenPLi for many years now, and I've used this
one on many projects already, so it's about time to push this to
mainline.
(From OE-Core rev: 19073fb991b3e2d2304e55f94e30674adf375197)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a line to mdev.conf that tells mdev to load kernel modules when
required.
For example, if you built wifi support as an external module, inserting
a wifi stick into a USB port will now automatically load that module
into the kernel and the wlan device will be ready for configuration.
Without this patch, you have to load required modules manually or force
them to load at system startup.
(From OE-Core rev: 11420b0566a6a085c6cb78f3f1495ed9c599e6fd)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simplify the grep expression, use the more common "grep" command instead
of "egrep", avoid forking extra processes, join multiple invokations into
a single combined expression.
Change the touchscreen regex so that it also recognizes various USB
touchscreen controllers and the ad7879 i2c device.
Based on code used in OpenPLi and meta-topic.
(From OE-Core rev: e82353eb9f76b582122fda27c93339eac5553eb2)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mdev.conf references the find-touchscreen.sh script, but this file
was not being installed. Add the script to the busybox-mdev package.
(From OE-Core rev: 44f6df0dfac54845ef5c3ab1af5663d1b6c1d64b)
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* EXTRA_LDFLAGS isn't defined for !uclibc and configure fails
when it reads it unexpanded, see config.log snippet:
configure:4177: checking whether the C compiler works
configure:4199: i586-oe-linux-gcc -m32 -march=i586 --sysroot=/OE/sysroots/qemux86 -O2 -pipe -g -feliminate-unused-debug-types -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed ${EXTRA_LDFLAGS} conftest.c >&5
i586-oe-linux-gcc: error: ${EXTRA_LDFLAGS}: No such file or directory
configure:4203: $? = 1
configure:4241: result: no
(From OE-Core rev: a3e9b391e1024d6d2e256b75c214d34e6693e332)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is used by debianutils.
(From OE-Core rev: 6214649b3aed5075c86aed79aa1356f1e5a19f9d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding glob support for entries in IMAGE_BOOT_FILES. Files picked up by
glob are by default installed under their basename, as this is likely
most common use case. Target name for globbed entries specifies the
name of directory in which files will be installed withing the partition.
(From OE-Core rev: 2c9635bdb97ddc80750c11d356e153a99d61cf09)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check for malformed entries in IMAGE_BOOT_FILES, fail early if such
entries were found.
(From OE-Core rev: e56072aaaad6cfa222853a4e9e68dd8aa861de18)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most of /etc/init.d/udev-cache is in a conditional block which can be
replaced by a `[ ... ] || exit 0` to reduce nesting.
This also provides an opportunity to add some additional messages
when VERBOSE is set.
Capture and report errors encountered in the cache generation process,
using set -e and trap EXIT. These errors were previously being ignored.
(From OE-Core rev: a1357f3c78e46cd4297fefab56acf87342967132)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't hold up the boot while the cache is being updated.
(From OE-Core rev: eb52b257511b7624c8e212f5e9df711935d619ee)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ben Shelton <ben.shelton@ni.com>
Acked-by: Gratian Crisan <gratian.crisan@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Presently, the cache is not regenerated if udev rules are modified,
which may cause the cache to preserve an old configuration. To fix,
include the size, mtime, and filename of all udev rules in the system
configuration.
This change requires `stat`. If busybox supplies stat,
CONFIG_FEATURE_STAT_FORMAT must be enabled.
(From OE-Core rev: 8847e33b12171a21b7c7e1241198080ad9ef9284)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Failure to use the udev cache is a significant enough impact to
the boot time (possibly seconds) that it should always be
reported on the console, regardless of the VERBOSE setting.
(From OE-Core rev: 9e588bbf9477d57f0a46d92ce11f8f891115496c)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace a bunch of echo's with a single cat<<EOF. Take this opportunity
to more clearly communicate what is going on with the cache and what
files are being looked at.
(From OE-Core rev: d768772a1259d3659d0424c39e65eeb3443af86c)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current system configuration needs to be generated both inside
udev (to compare against the cached system configuration) and
udev-cache (to regenerate the cached system configuration). Use a single
function definition for this task, duplicated across both initscripts.
This also allows administrators to modify it for machine-specific
requirements.
(From OE-Core rev: 34957afcfe663eed4f5ebec0891a84467e67a48d)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The udev initscript signals udev-cache to run by generating a new
sysconf; but udev-cache now overwrites that with its own copy. To
eliminate the needless sysconf generating in udev, we instead trigger
udev-cache to run by touching a new file $DEVCACHE_REGEN.
(From OE-Core rev: 8d2325be2d03086b7e5a02618edb05b19fbcdc48)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, udev-cache system configurations are compared as shell string
variables, read into memory with the readfiles() function. This is more
complex, and significantly (27-41%) slower, than comparing them using
`cmp`. (Performance was verified on both Cortex-A9 and Intel Nehalem
systems.)
So just use cmp. This requires a few other small changes:
exclude /proc/atags from CMP_FILE_LIST if it doesn't exist to avoid
errors in `cat` and `cmp`.
`cmp -q` doesn't exist in busybox, so instead, redirect output to
/dev/null.
(From OE-Core rev: e8ea6a29ed3ab9892a3bc7ee8249f10688c0af29)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The validity of the udev cache is determined by the sysconf
file (/etc/udev/cache.data). Currently, there is a substantial delay
between sysconf generation in /etc/init.d/udev and cache generation in
/etc/init.d/udev-cache. If a hotplug event arrives in the middle of
this, then the sysconf will be out of date with respect to the cache.
The solution is two-pronged. First, we minimize the race window by
regenerating the sysconf immediately before the cache, in
/etc/init.d/udev-cache. This allows us to kill the race entirely by
stopping the udev event queue while the sysconf and cache are being
generated.
(From OE-Core rev: 107e7fa2b2cc2e06addb83518c03b3ab769fed6f)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the split out of git-perltools, some git tools (such as "git am",
"git send-email" and "git-submodule") have no longer been part of the
buildtools. We need these, so add them back in.
However, adding git-perltools to buildtools triggers perl itself being
brought into buildtools as well, and we don't want that; but we also
don't want to have to hack the git recipe or indeed anything else that
starts depending on perl. Thus, add a dummy package which gets installed
in its place, in a separate package architecture that is only enabled
for buildtools to ensure it doesn't start appearing in place of
nativesdk-perl anywhere else.
Fixes [YOCTO #7033].
(From OE-Core rev: 5b051d65e797624cca3a81fc6f5c924925f3493e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Template unit files (those with '@' in their names) are not handled with
native version of systemctl. This is usually not a problem, as the
native systemctl fails and systemctl command is executed during first
boot. But some early boot template units may fail during first boot
because opkg configure for first boot is pulled too late for them
(although I encouter it only with some of my services, not with oe-core
ones).
Handling of template unit files is same as in original systemctl. Also
DefaultInstance directive in template is respected. As with original
systemctl, enabling of template without instance and DefaultInstance
does nothing.
(From OE-Core rev: 90904ef3bab182a46174f7bb60e83f0f22a3f209)
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While wildcard in INCOMPATIBLE_LICENSE, such as INCOMPATIBLE_LICENSE =
"*GPL-3", libproxy could correct work.
[YOCTO #5592]
(From OE-Core rev: 97f46c97c7f8a39f3691aee423b4192680d114a0)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While wildcard in INCOMPATIBLE_LICENSE, such as INCOMPATIBLE_LICENSE =
"*GPL-3", PREFERRED_VERSION_db-native could have the correct value "5.%"
[YOCTO #5592]
(From OE-Core rev: fddca246f15ff72828a0198d8c4d3e58d8bf4442)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The whitelist processing in code in base.bbclass does not play well with
wildcards in INCOMPATIBLE_LICENSES. The code expects bad_licenses to
contain actual license names, not wildcards.
Add incompatible_license_contains to replace bb.utils.contains(
"INCOMPATIBLE_LICENSE", **, **, **, d)
[YOCTO #5592]
(From OE-Core rev: 3587653a8d8abc7cfed6a5c6ecfa72bee283e451)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It can be alarming to attempt to exclude GPLv3 from an
image but find that libstdc++ and libgcc still show it.
We indicate the license for each package to show libraries
that really are just GCC-3.0-with-GCC-exception.
(From OE-Core rev: 5db535a91edea439c14e75726acd23e64bb1e2ea)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Toaster will log all the files that it can find in the
deploy images directory, and list them, considering that
they may be artifacts of the current build not logged
anywhere else.
[YOCTO #6836]
(From OE-Core rev: 87a25b1dec86da809c9a13c10449bd33a471cb95)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: c0650feb6ce7151a22632bab7270002314a1b6be)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PKG_CONFIG_PATH always defaults to /usr/lib/pkgconfig, and the host
/usr/lib/pkgconfig is always checked as a fallback; however,
PKG_CONFIG_PATH is currently (incorrectly) set to /usr/lib/pkg-config in
the sysroot, which doesn't exist. On host distros where the font
encoding maps are stored under a different path than OE, this will break
font builds, because ucs2any will attempt to read the sysroot's encoding
maps with the host paths.
(From OE-Core rev: 89a29a3ad0742cd713e739d3d460be7711966679)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A number of settings (DESCRIPTION, SUMMARY, postinst, postrm,
and appends to RDEPENDS) were made only if FILES_foo was not
set for a given package. If you had a modified glibc packaging
setup that was defining FILES_glibc-gconv-somelocale, this would
prevent the automatic append of glibc-gconv as a dependency,
because extra_depends was ignored.
I think the assumption may have been that if FILES_foo was set,
DESCRIPTION_foo and SUMMARY_foo would also be set, but it seems
to me that the right answer is probably to set them if they aren't
already set, and leave them alone if they are.
(From OE-Core rev: 7e59b0c7e03fc08a6eaf9c8ccb6bfa72b4604cc5)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes build on systems using dash for default shell e.g.
errors like
run.do_strip.25842: [[: not found
| readelf: Error: Unable to read in 0x37 bytes of section headers
| readelf: Error: Not an ELF file - it has the wrong magic bytes at the start
Change-Id: I29cac15be44a02d75a3d6889b6ae9b2e19bf46af
(From OE-Core rev: 6956ffdc6e9879e32360b6ee3a3d286618807485)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For cpio/ramfs the kernel will first attempt to execute /init and will
emit the following error as the file is empty:
Failed to execute /init (error -13)
If /sbin/init exists symlink to it so the kernel can immediately start
the correct init executable instead of an empty file.
(From OE-Core rev: 3505558e067fdde4ab7aaaf3c50886f292d7c166)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
shadow package configure step fails with this log output :
| checking location of faillog/lastlog/wtmp... (cached) /var/log
| checking location of the passwd program... (cached) /usr/bin
| checking for posix_spawn... no
| configure: error: posix_spawn is needed for nscd support
| Configure failed. The contents of all config.log files follows to aid debugging
| ERROR: oe_runconf failed
(From OE-Core rev: 3678e504cf81f45bd0b0ab315f9cc4da87a633b5)
Signed-off-by: Baptiste DURAND <baptiste.durand@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this also includes a fix for CVE-2014-8564.
see http://www.gnutls.org/security.html for CVE-2014-3566 "POODLE" statement.
(From OE-Core rev: 60e4c6ca148e736c947477da4ddcb5e7fdfb94f1)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Per commit f6587be6cd3dc864143b1c0be0bb8179a61dc835 (lttng-modules:
re-enable ARM builds) lttng-modules is fine for ARM now. Without this
additional change, tools-profile won't bring in lttng-modules when
targeting ARM.
(From OE-Core rev: fbf979da6e6b7332dccab38fd66f3c01594f8211)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the export LD in the recipe does not allow for secodnary toolchain
overriding LD later, by setting it in the do_configure_append the export
is used by autotools setting LD based on the env, but would allow for
override later.
[YOCTO #6997]
(From OE-Core rev: 9b37e630f5f6e37e928f825c4f67481cf58c98a1)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
vte will pull in the gtk libs itself. This can cause build failures if
the native gtk was build with glib>=2.41 while the sysroot native glib
is <=2.40.
Fix for [YOCTO #7077].
(From OE-Core rev: 6cea10dd8f041731269ad16b94d8e172ab1f7257)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The autogen.sh script lies in the srcdir ($S) and is required to be run on git
based checkouts of gstreamer packages in order to generate initial
makefiles. So, we fix this by cd'ing to the specific dir, run the required
script and then come back to our initial dir which is builddir ($B).
Additionally rather than overriding the whole do_configure step we only _prepend
to make it clear what we are doing here.
(From OE-Core rev: f4a26b72377380e60d1e7058ba40aaf49b6316e5)
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For clarity use PACKAGECONFIG for the systemd and bluetooth optional features.
(From OE-Core rev: e76e7bf166544c1059c20753165a644dc1af750f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The RTMP plugin was non-deterministic, based on whether rtmpdump from
meta-multimedia had been built. Add a PACKAGECONFIG to resolve this.
(From OE-Core rev: b34147722b1ea43e960eae10c514325e40cdf0ba)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running bitbake inside make results in the exported environment variable
MAKEOVERRIDES="${-*-command-variables-*-}", which the shell chokes on
when trying to expand it. But of course, it probably shouldn't have been
trying to expand it in the first place -- so just escape the dollar
sign.
(Bitbake rev: 18cd0ce6a55c9065c3f1bf223b47d817b5efcd8f)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tidy up the page initialisation and change the error logging so that
it's consistent with other pages.
(Bitbake rev: 3a5b78af4f3cab203824d933a73e82a41ab377e3)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the import layers notification for multiple layers
there was a full stop where there should be a colon.
(Bitbake rev: c23736003b788f2b45ae7cbcd7c7250ead2e5724)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Richard Purdie
mike.looijmans@topic.nl
Martin Jansa
Ross Burton
Maciej Borzecki
Nicolas Dechesne
Saul Wold
Richard Tollerton
Paul Eggleton
Tomas Novotny
Hongxu Jia
Joe Slater
Alexandru DAMIAN
Jonathan Liu
Peter Seebach
Khem Raj
Nathan Rossi
Baptiste DURAND
Armin Kuster
Nathan Lynch
Awais Belal
Michael Wood
Belen Barros Pena