I discovered that the figures used in this manual differ depending
on the branch. There are two figures that are different. Thus,
the TARFILES variable in the makefile needed to be conditionalized.
If it is not, then the process that makes the tarball throws errors
because it cannot find the two figures from the other branch.
To fix this I introduced the 'BRANCH' variable. It is to be used
only when you make or publish the YP Development Manual. And, you
only use it to specify 'edison'. If you are building from the 'master'
branch you don't need to use it.
Comments in the file have been updated to explain usage.
(From yocto-docs rev: a404eadbeeb6eb7476d8739bd07ecd071e9ff7da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had added some edison-specific figures and they needed to
be included in the TARFILE variable for the YP development manual.
The fix now makes the TARFILE variable all-inclusive for all
.PNG files regardless of branch. Consequently, there can be
some missing files when the manual is made but the errors are okay.
I documented the exceptions above the variable.
(From yocto-docs rev: 500d4102c5496cb834b93378242599715810386a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poor flow for the config_smp example. Upon reading this example
it did not stand well on its own. I added some text, albeit
redundant but necessary I felt, so that the example would stand on
its own.
(From yocto-docs rev: f8c0c9469eae0788f1bfba309deefb4e03d4bc29)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jim Abernathy pointed out an area where the bitbake command is
run from the top-level poky directory. This is incorrect and the
user should run this from the build directory. I changed the
instance so that the example instructs the user to either run the
environment setup script first, which would place him into the
build directory. I also reinforced it by adding supporting text
saying that you should run the bitbake command from the build
directory.
Reported-by: Jim Abernathy <jim.abernathy@intel.com>
(From yocto-docs rev: b111e5e4faa6d4e5e99f48b886aeb72bb12e2914)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jim Abernathy pointed out that the 'fop' package is not in the list
of packages. Not having 'fop' prevents the user from building the
PDF versions of the documentation. I added 'fop' to all three
distribution's package lists.
Reported-by: Jim Abernathy <jim.abernathy@intel.com>
(From yocto-docs rev: f481361fbc3330a8f415be8cb992844c2f214ce3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The links to the 32-bit and 64-bit Python tarballs in
miscsupport were broken. I fixed them.
(From yocto-docs rev: cc50d1ea3155cf1dd8d060c2c361b99b4f7d0d8e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bad wording fixed to describe the changes to PATH when the setup
script is run.
(From yocto-docs rev: 0f2ae72edfab2a96cb5f82fac641f3b6fa364f36)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The menu for the YoctoTools in Eclipse moved from underneath
"Windows" to the top level. I fixed the reference to reflect
that change in the GUI.
(From yocto-docs rev: 10142812f55bce849b31c38337b0a731d71d2ba0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the wording in an example to use "menu" instead of
the incorrect "navigator pane".
(From yocto-docs rev: 751ac717d17356a77cd3967f9214be74a7bad910)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a bit more information to the third step of the
example that reconfigures a project.
(From yocto-docs rev: e21ebe5b665b50705fa863436e83af6cbd00eb5d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed a redundant link to the QS manual.
(From yocto-docs rev: 44ab96f9eaad8e57de760e2612e1a92bfe2ea898)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I worked through these methods and discovered a bit more on how
they actually work and when the user would use a given method.
The updates reflect this new knowledge.
(From yocto-docs rev: aa588a2bd2c28cc42db3a539ca5aba7233612de7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed redundant link for referencing a section of a different
manual.
(From yocto-docs rev: 5a78f2c4453944e750a0250f585bcb0614dbcbf6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the PDF version of the reference guide there were several glossary
variables that did not format correctly. The issue is that the two-
column list had instances where the variable name overruns the
variable description. I added an extra line return for these cases.
(From yocto-docs rev: bef1a8dfdc0529b270102d0336a7bd6d1500b68c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made another pass over the variables that affect the root filesystem
size generation. The changes are based on review feedback from both
Saul and Joshua.
(From yocto-docs rev: ccd569d7e464a219a1a3ff9b063e431ba3c946de)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added text to show how to unpack the generated ADT Installer
tarball.
(From yocto-docs rev: 32e7413623a5b43484d402989f892527e4a0fc48)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In resolving a commit conflict I accidently inserted some "1.1.1"
strings in some URLs where they should have been "latest". I fixed
these back.
(From yocto-docs rev: a78a28f317b426413ec0bd8c4115d5e69f609283)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure that shows the kernel repos needed the git push
command fixed. There was no ":" character in it.
(From yocto-docs rev: 4add1c83a8e3f4fec9ec6b678e31e259c700c077)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to update the figure again and I updated the surrounding
text.
(From yocto-docs rev: ed0aea8ad3670aace1eb51ca7a72e75a4c129fba)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the picture that shows the index of releases. they renamed
this from index of downloads.
(From yocto-docs rev: 38ffbb3138fa43fcb44456e6b6f46dc78cc87a14)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is note instructing the user to delete unused .bbappend files
or comment out the COMPATIBLE_MACHINE statements in those unused
files before running the build in the example. the note was not
clear about the COMPATIBLE_MACHINE statement in the .bbappend file
that is actually being used. I edited the text to be clear about
that.
(From yocto-docs rev: 73ed4df6f312c25103c41a1ee1dcdb9f7114ca45)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the console output created when you create the bare clone
and the copy of the bare clone.
(From yocto-docs rev: cc6290e416fb113f687645517bccf3f6f177395e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the console output returned when you set up the
poky-extras repo.
(From yocto-docs rev: f0fe9a6e04f72c727562719244719ce1058256e4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a link that had a spacing problem and should not have
been linking to the manual in general. Fixed the spacing problem
and removed the links to the book in general.
(From yocto-docs rev: ce274c0290c4f8998bb682f8d84f5ee456837c62)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found another broken link to the Git documentation. They must have changed
this stuff up. So I set the link to point to the appropriate area in
the Git Community Book. Talks about distributed workflows.
(From yocto-docs rev: f81d6bbff20629b2b3af73ef53f471090b9d828b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
there was a link to some Git documentation referencing workflows that
apparently had gone stale. I replaced the reference with a link to
the Git Community Book.
(From yocto-docs rev: 7a2cbe4c45eb9bb53d5ddbc014bd6005c2844d56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Git Workflow was missing a pull line from the second (bottom) contrib
box into the project's master Git repository. I added the line.
(From yocto-docs rev: e7e2f92a92cec3798395470595ba1a2beaf36575)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Beth has created a scheme that uses a file named "poky.ent" that
contains a load of variables that can be used throughout the
documents for releases. The variables can be set in the poky.ent
file and then sucked in during the make process to specify
a release.
This commit adds the new file and the changes to the YP QS manual.
(From yocto-docs rev: b08dde630a4f0762d8cc62c5579f6917d93ee854)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Otherwise, recipes that only append to SRC_URI instead of
overwriting it will get the full path of the recipe written
into the Source: field of the package.
(From OE-Core rev: 516d2029b31b014de1c87d23dd86208a4480579c)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [Yocto #2036]
The source and build directories are unused, remove them.
The modutils and modprobe.d directories may be used if modules are built that
are either autoloaded or have modprobe.d entries. This isn't known at install
time, so check after the package split if these directories are empty and
remove them if they are.
(From OE-Core rev: 6068f3229397baf561b1e84a22b570a803d95c49)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed to ensure that the RDEPENDS_${PN}-dev,
RDEPENDS_${PN}-staticdev, and RRECOMMENDS_${PN}-dbg are accurate with respect
to the PKGV of the ${PN} package, and incidentally fixes an rpm packaging
issue, as rpm dislikes the recipe PV as PKGV.
(From OE-Core rev: 61d5fa2b7ae6b3ce49747a102b3817c36f6cf85d)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As usual, this creates problems for upgrade paths, but splitting out the lib is worth the short term hassle
(From OE-Core rev: af1a2740bc47d355a3435fc5d36c47e48cb05ad2)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only depend on X libraries if the distribution has X support.
(From OE-Core rev: 8a4bc16b853f3d5092c588703eef0ccb6aeb6ba1)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping the -rt kernel to pickup the incremental update to -rt16.
No major changes from -rt15, except for a bug fix that we want
to pick up.
(From OE-Core rev: 0b03c2382ad6b2d472555f5054a1ce82eb4e3de9)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the meta SRCREV to pickup the following fixes:
a9ffedb meta/fri2/sys940x: fix incorrect cfg includes
3d1a678 meta/sys940x: fix incorrect emgd branch merge
During the merge of the 3.0 BSPs forward to 3.2, a few moved config
fragments were missed.
(From OE-Core rev: 51c0c1d07d44b3bffb63d15b6befff6e7ba2549f)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python commands module is used in the recipe, but never imported.
This leads to build errors like:
NameError: global name 'commands' is not defined
ERROR: The stack trace of python calls that resulted in this exception/failure was:
ERROR: File "do_compile", line 24, in <module>
ERROR:
ERROR: File "do_compile", line 11, in do_compile
ERROR:
ERROR: The code that was being executed was:
ERROR: 0020: bb.build.exec_func("oe_runmake", d)
ERROR: 0021: shutil.copyfile("psplash", outputfile)
ERROR: 0022:
ERROR: 0023:
ERROR: *** 0024:do_compile(d)
ERROR: 0025:
ERROR: (file: 'do_compile', lineno: 24, function: <module>)
ERROR: 0007: localfiles = d.getVar('SPLASH_LOCALPATHS', True).split()
ERROR: 0008: outputfiles = d.getVar('SPLASH_INSTALL', True).split()
ERROR: 0009: for localfile, outputfile in zip(localfiles, outputfiles):
ERROR: 0010: if localfile.endswith(".png"):
ERROR: *** 0011: outp = commands.getstatusoutput('./make-image-header.sh %s POKY' % localfile)
ERROR: 0012: print(outp[1])
ERROR: 0013: fbase = os.path.splitext(os.path.basename(localfile))[0]
ERROR: 0014: shutil.copyfile("%s-img.h" % fbase, destfile)
ERROR: 0015: else:
(From OE-Core rev: 34bdb9a459208377210454e54635afb9404ee126)
Signed-off-by: Peter Tworek <tworaz666@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
core-image-sato/core-image-minimal builds and boots
on all qemu machines
(From OE-Core rev: 40d7a4b70d342f75e13de7872fb62e2b9d6d40bf)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The logrotate can't save the log across the different filesystems since
it used the "rename(const char *oldpath, const char *newpath)" to save
the file, fix it to act as the "mv" command(first rename, if failed,
read and write) to allow save the log across the different filesystems.
* config.c: Remove the check for different filesystems
* logrotate.c: Act as the "mv" command when rotate log
* logrotate.8: Update the mannual
* logrotate.8: Fix a bug in the mannual(\f should be \fR)
[YOCTO #718]
(From OE-Core rev: fca0a2c597ab40d55da768dac4088234b9b0d773)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is an update of the linux-yocto 3.0 and 3.2 SRCREVs to bring
in the following updates:
- v3.0.23 stable update
- v3.2.9 stable update
- 3.0/3.2: fri2 updates (pch + configuration changes) from Darren Hart
- 3.0: pvr merge from Kishore Bodke
- linux-yocto/rt: update to 3.0.23-rt38
- linux-yocto/rt: update to 3.2.9-rt15
These have been built for all qemu targets, and built for the appropriate
hardware platforms.
(From OE-Core rev: a9e7131b85e1787e6f76c64d77b2ac6684c8a9c9)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of specifying nocheckout=1, it provides a better workflow if
the linux-yocto recipes use the new bareclone=1 option to get a mirrored
copy of the source repository. This allows all local and remote branches
to be available during the kernel build and development cycle.
(From OE-Core rev: 2281e14a342639bfd2656ffa220dc023168cb35e)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Introduce a new variable called IMAGE_ROOTFS_ALIGNMENT that allows to control
the aligment of the size of the rootfs. Its default value is set to 1KiB so
that the existing behaviour is not changed. In case the SD card emulation of
a QEMU system emulator gets used you may set the alignment to 2MiB.
(From OE-Core rev: 99128c209e3de3e9e175eacb3acf0f06857043fe)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Andreas Oberritter
James Limbouris
Darren Hart
Christopher Larson
Koen Kooi
Saul Wold
Mike Crowe
Samuel Stirtzel
Zhai Edwin
Dongxiao Xu
Bruce Ashfield
Peter Tworek
Khem Raj
Robert Yang
Ken Werner