Add support for the BAD_RECOMMENDATIONS variable that can be used to
prevent specific packages from being installed via an RRECOMMENDS
relationship when using the RPM backend. (Previously this
functionality was only available when using ipk packaging.)
In the process this moves the defaulting of BAD_RECOMMENDATIONS (as
empty) to bitbake.conf since it is no longer specific to the ipk
backend, as well as unifying some of the code that creates the
configuration for smart for use on the host and target.
Fixes [YOCTO #3916].
(From OE-Core rev: 4e85129a7d47baf3e32b815cbc277bff84e085a0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a local SECURITY_NO_PIE_CFLAGS to cover the recipes that have
issues with with pic and pie cflags set.
(From OE-Core rev: 4f5009dcbbeb27bdf5dcaebb3b457fecef410ebe)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bumping LAYERVERSION_core to denote where meta-toolchain* is being
depreciated.
This goes back to my RFC:
http://comments.gmane.org/gmane.comp.handhelds.openembedded.core/39016
As we are removing meta-toolchain* and replacing it with bitbake
<imagename> -c populate_sdk this causes issues with those of us who
need to do automated builds both on the current development branch and
on prior development branches.
Example: For prior releases, I need to build meta-toolchain*. Without
having a simple way to figure out where this is no longer the case, I
(and other folks who run automated builds) end up having to jump
through a lot of hoops trying to figure out where this layer changed.
Utilizing LAYERVERSION_* to do it makes sense as there is a
significant change that would cause issues for build engineers.
(From OE-Core rev: 41053141cdc04fd6d8490b54b8b8dc59dc0fe93a)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These flags add addition checks at compile, link and runtime to prevent
stack smashing, checking for buffer overflows, and link at program start
to prevent call spoofing later.
This needs to be explicitly enabled by adding the following line to your
local.conf:
require conf/distro/include/security_flags.inc
[YOCTO #3868]
(From OE-Core rev: ff0e863f2d345c42393a14a193f76d699745a2b9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add SGI license used, for example, in glmark2
(From OE-Core rev: cf59801be372bda962a94e6a406e97d20744ae45)
Signed-off-by: Diego Rondini <diego.ml@zoho.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that bitbake supports masking events for event handlers, lets use
this so event handlers are only called for events they care about. This
lets us simplify the code indentation a bit at least as well as mildly
improving the event handling performance.
(From OE-Core rev: bff73743280f9eafebe4591f7368ead91a4eb74d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is due to the need to rely on bitbake-worker being present going
forwards.
(From OE-Core rev: ccf4fe860096f4b2a56b51b612b2a1dcb3525e59)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to correctly handle fakeroot at the bitbake level we need some extra
information which we provide with these new variables.
(From OE-Core rev: 003ea0fd1017dde50ced710179d0dc2e835d5185)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using CORTEX_ID variable reference in the tuning overrides did not work.
This reverts those changes, and adds a tuning file for the cortex-a5.
Revert "tune-cortexa5.inc: Add tune file for cortex-a5"
Revert "tune-cortexa.inc: create a common include for cortex-a armv7a tuning"
(From OE-Core rev: 74158c2e99c6d8631800ae80025d1cc9f19336d2)
Signed-off-by: Andy Voltz <andy.voltz@timesys.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The tuning files for the cortex-a* processors are mostly identical for
the A7,A8,A9,A15 processors. Rework these files to use a CORTEX_ID
variable to setup the tuning for each specific processor.
(From OE-Core rev: 3e4f4a1cf07ff7cf4c71566492385f8fbf581789)
Signed-off-by: Andy Voltz <andy.voltz@timesys.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The insane has been inherited by package.bbclass and becomes a
requirement, so we can remove it from defaultsetup.conf.
Note:
You can decide whether to take this patch or not.
[YOCTO #3190]
[YOCTO #4396]
(From OE-Core rev: 875f31facd02b47afb867aed76fef6b89a7b17cf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the current releases, not all linux-yocto derived kernels have NFS
support, or NFS support fragments availble. To ensure that derived
kernels like linux-yocto-cutom continue to work against poky-lsb,
we can make the KERNEL_FEATURE append more specific to the linux-yocto
recipe.
(From OE-Core rev: 799f53e8844748a930a9cbc7a4cf1056f19bb037)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fixes build without EXTRA_IMAGE_FEATURES defined:
ERROR: '${EXTRA_IMAGE_FEATURES}' in IMAGE_FEATURES is not a valid
image feature. Valid features: dbg-pkgs ....
(From OE-Core rev: b2cc92595b30d96a79f33ea7a7217834c8b6bff7)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use "??=" to set default ROOT_HOME. It can be overwrote by developer
with "?=" in any layer and at same time it also can be overwrote in
local.conf.
(From OE-Core rev: 902d3fa57d4659ee12aac80246dcaca5c45f9d8c)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We no longer change GLIBC_ADDONS per target so we no longer need to special
case the SDK settings for it either.
(From OE-Core rev: 3fb0e792600b5adb58bc5fca90d8605c1c76280f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python3 is stricter about type comparisions so add an explicit cast to int()
to ensure this code is portable.
(From OE-Core rev: b9a1b9ad55c0f9fec082ffa37e576d8fd664becd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will ensure that qemu images that include the nfs-server package have the kernel
feature correctly enabled
(From OE-Core rev: 57c718c6288f2a2538173cdd3d401d70f939a40a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no good reason for ia32 machines to have hard dependency on grub,
as there are other bootloaders available for ia32 platforms.
(From OE-Core rev: d03c0c24704c6ab6d2cfcf9bf705f6ace2a247cc)
Signed-off-by: Tomas Frydrych <tomas@sleepfive.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the first step in deprecating SERIAL_CONSOLE without affecting
machine configurations that still use it.
(From OE-Core rev: 3f0d665384e6d1b7aa2854a9cc4f13e0961bacb7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recommendation is of no obvious value and causes unexpected behaviour
when using IMAGE_FEATURES += "dbg-pkgs".
(From OE-Core rev: b64f2ef2be5dca1eb13a305147a2b99d57985010)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* number of TUNE_CCARGS conditionals is important if we add
extra space with each one in "else" branch
I'm building for 2 MACHINEs one is cortexa9, second is cortexa8
few months ago we added TUNE_CCARGS[vardepvalue] in bitbake.conf
http://git.openembedded.org/openembedded-core/commit/?id=03f1e34ea3ce80931e9c3cd2ab22824f28a7233b
which fixed some cases (like mentioned tune-xscale and tune-arm926ejs)
where both had unused TUNE_CCARGS when common DEFAULTTUNE was used.
with cortexa[89] it's different, because cortexa9 has one extra TUNE_CCARGS
TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa9", "-mtune=cortex-a9", "", d)}"
which adds extra *space* even when not used because of '+=' and as result:
$ bitbake-diffsigs tmp-eglibc/sstate-diff/1366797730/*/armv7*/adapterbase/*do_configure*
basehash changed from f986789fb8fb3579ed6a3492cc8a8d10 to c851b5f838d945ee13072e9ad6725dca
Variable TUNE_CCARGS value changed from
' -march=armv7-a -mthumb-interwork -mfloat-abi=softfp -mfpu=neon '
to
' -march=armv7-a -mthumb-interwork -mfloat-abi=softfp -mfpu=neon '
Hash for dependent task gcc-runtime_4.7.bb.do_populate_sysroot changed from bdeabf7a86958b9110b566344b7916de to 2be5618e6bc8c57ec9db5659bf217915
Hash for dependent task eglibc_2.17.bb.do_populate_sysroot changed from b4f40fc62dde684acd0a574532a55360 to 97fcb426603d4a1c1099c0504d2ebf7d
Hash for dependent task glib-2.0_2.34.3.bb.do_populate_sysroot changed from fd2f90b83098c34e88d649d70f6ea4f5 to ebd740bb94ea3eb0a914efda6fc82c4a
(From OE-Core rev: b7430ff83760ac29079d20dc7c62f498a0a9d55d)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Multilib with opkg hasn't worked since the --force-overwrite option was dropped in
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=88a9f6db3482623c9cb54fb03db1045051cec9f6
Since we merged the libexecdir changes, we also need the --force-maintainer flag
to avoid conf file conflicts.
Both these changes are suboptimal however the alternative is completely broken and
these changes only affect people who have multilibs enabled and use opkg.
[YOCTO #3453]
(From OE-Core rev: 6310e66cd62aab6109027a8dce9c56bf721bea92)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"packages" was the old name (pre-2010) under which the recipe files were
stored.
(From OE-Core rev: c71fa87bc2e7155e69ea5ff7a284a05073602eed)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because rename libpng_1.2.50 to libpng, remove the perfer verion from
default-versions.inc and add libpng12 to lsb packagegroup.
(From OE-Core rev: 01fa98083df0931e07e8715616dafe600258adba)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it was imported from meta-systemd without SIGGEN_EXCLUDERECIPES_ABISAFE
change
(From OE-Core rev: 40c6090e67fe4def94223954e4ada01115f267dd)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gtk-update-icon-cache-native is the only provider now
(From OE-Core rev: 7e437aa3e0ec862aac69a4434be0b2b652d26972)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current LSB 4.1 test suite still check libpng12.so, so add libpng 1.2.x
back, and set it as default verison for linuxstdbase image.
[YOCTO #4015]
(From OE-Core rev: f2463ce26706b971dad0116e8b92f9d55e945137)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Possibility to customize the text that is presented to the user when
they execute the script.
(From OE-Core rev: 6ad06582621fc20d09d4d7fd78ea7e175367c187)
Signed-off-by: Anders Roxell <anders.roxell@enea.com>
Tested-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the qemu.inc is now included before the XSERVER assignment, the
xf86-video-vmware and xf86-video-vmmouse are not built and the X for
qemux86 and qemux86-64 does not start.
[YOCTO #4124]
(From OE-Core rev: f9c12a42f9777bc66b2ce63a244e655d167025ed)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reflect reality by backfilling sysvinit support, instead of whatever value was
in DISTRO_FEATURES_INITMAN.
(From OE-Core rev: 0b6559cd93a64498646d18a121746c6816382407)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
DISTRO_FEATURES_INITMAN is going away as it's not useful in a hybrid init script
environment.
(From OE-Core rev: 7afd57993277ae7aa30e56edda327bb5f28ad153)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the logic so that the udev provider is the standalone udev, unless the
systemd DISTRO_FEATURE is set. The previous logic was designed to fail if both
sysvinit and systemd were enabled, which we're supporting now.
(From OE-Core rev: f5d018a769fa297efa629cbbf6e42a49173faa8b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OVERRIDES reads from left to right, least to most specific. We were
appending to MACHINEOVERRIDES when we should have been prepending so
the ordering of qemuall verses qemuxxx was incorrect, as was the x86
override and several of the arm overrides. This patch is a batch cleanup
of the various issues to correct the order from least to most specific.
The include order does matter and we needed to tweak some of that in this
patch too.
[YOCTO #4090]
(From OE-Core rev: bdc1b214431c9c93a929b547b9a61e7b87fbd366)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename mesa-dri recipes to just mesa. Also, replace all references to
mesa-dri in all recipes/configs.
The reason for this renaming (quote from bugzilla):
"mesa-dri is a artefact of mesa-xlib existing, which doesn't anymore.
mesa-dri should be renamed to mesa."
[YOCTO #3385]
(From OE-Core rev: c8bbb9983bcc7cfc5332e89c3e8148505b4ca83f)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Going forward its going to be useful to separate build data from source data
in those autotooled projects which support it. Unfortunately there is a lot
of breakage so for now, this starts the creation of an opt in list which
we can iterate over enable more recipes over time.
(From OE-Core rev: 9e64079063fc4748b48eee0e2592caf8ba9de10e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake handles immediate expansions of LAYERDIR for us automatically.
(From OE-Core rev: 643ac87145eba5dc105377041bc3deb163b62926)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These hacks have been around for years and deal with old gcc issues.
They've been removed from the other use sites, we should clean up the
core tune file too.
(From OE-Core rev: 742eb82b85a315bb908caf64516e464ae6153668)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
some layers e.g. meta-intel are defining LICENSE_PATH in layer.conf like
LICENSE_PATH += "${LAYERDIR}/common/custom-licenses"
This causes the target packages to invalidate the siginfo and casues
rebuild for all packages.
Thanks bitbake-diffsigs, it shows
basehash changed from c27b55ea6980262fab370e539ba8bcd7 to
37962b22ebd6194e9537bc4f85819323
Variable LICENSE_PATH value changed from '
/builds2/poky/meta-intel/common/custom-licenses' to '
/b/kraj/jlinux-next/poky/meta-intel/common/custom-licenses'
(From OE-Core rev: 1dab754cb1ec942f86a7cf9758e6b5169e50bff3)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* all cortexa*thf-neon except cortexa8 were missing thumb feature from
TUNE_FEATURES_tune-armv7athf-neon
* all cortexa*thf-neon except cortexa8 included cortexa9t2-vfp instead
of cortexa9t2hf-vfp
* PACKAGE_EXTRA_ARCHS_tune-cortexa8thf-neon was including from armv7a
-PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon
+PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon
* please do more testing for this, I'm sending this commit mostly
because I've noticed that new a7 and a15 differ from a8 more then I've
expected and I don't have any a7/a15 MACHINEs, feel free to extend
http://git.openembedded.org/openembedded-core-contrib/log/?h=jansa/tune2-test
to add and test fake a7/a15 configs
(From OE-Core rev: a207ce735b602b751467eb43e09b958e664a8e81)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* the current order has SOC_FAMILY settings, which are generic
settings for a group of devices, overriding the machine specific
settings. For example:
KERNEL_DEVICETREE_ti33x = "xxxx"
KERNEL_DEVICETREE_beaglebone = "yyyy"
Should yield "yyyy" when building for the beaglebone because
that is a more specific device than ti33x. However, without this
change the result is that the value is set to "xxxx" meaning the
more generic setting overrides the more specific setting.
(From OE-Core rev: 0b836b9d79255a5b2f358fe718c67638f52ecf72)
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Linux NFC project aims to provide a full NFC support for Linux.
It is based on the neard NFC user space stack running on top of the
Linux kernel NFC subsystem.
The code generated using this recipe was tested on a ARM11 device, with
a kernel 3.6, using, for the NFC hardware, a USB dongle with the PN533
chipset (SCL3711)
(From OE-Core rev: b2a74ae70725be7efc0226901fd560d3b3b48607)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add STAMPS_DIR for constructing STAMP, the defination of STAMP is:
STAMP = "${TMPDIR}/stamps/${MULTIMACH_TARGET_SYS}/${PN}/${EXTENDPE}${PV}-${PR}"
We can only change the TMPDIR if we want to change the STAMP's location,
but the bb_cache.dat would be regenerated if TMPDIR changes, so add
STAMPS_DIR for constructing it, and add it to the BB_ENV_EXTRAWHITE,
this is very usefull for the "bitbake -S", since then it can be run by:
STAMPS_DIR=<path> bitbake -S <recipe>
which will avoid putting the stamps to ${TMPDIR}/stamps.
BTW, break the too long BB_ENV_EXTRAWHITE into several lines.
[YOCTO #1659]
(From OE-Core rev: ce732c04b3ac06633e20efa8799c4189abfd41b3)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a virtual provider instead of a hard dependency so that if gtk+-native is
required in some configuration, this provider can be changed and then
gtk+-native and gtk-update-icon-cache-native won't be both built and conflict in
the sysroot.
(From OE-Core rev: 73c5458c7f041157832123696814b02df2b55090)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the 3.8 kernel has been released we can bump the libc-headers
to that version and remove the 3.7 variant. Userspace compatibility is
maintained through kernel versions, we also make the single 3.8 version
the toolchain default.
(From OE-Core rev: 4f9ef639143d890e9d2e71fea3b461fcc8e3f678)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* PR service cache needs to be persistent between rebuilds
having it in directory starting with tmp* does not help
people to understand that it needs to be persistent, so
move it to TOPDIR
(From OE-Core rev: 5d43f752429707b74dbf46ecb81ac76bad7bb715)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable is set but never used in OE-core and meta-oe. It
was historically used for the Opie collection but seems to be
unused now.
(From OE-Core rev: 323ef78e377525e2214f4700c30305c493137853)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should ignore BB_ORIGENV from the hash for the config data. There
are also a number of variables which no longer make it into the data
store so we can drop these from the hash whitelist.
(From OE-Core rev: cb21af00f9321ea48e533089dbffbb1a9665cb92)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need this for the multiprocessing pool issues in python < 2.7.3 whic
we now use in do_package.
(From OE-Core rev: 027dc0ec80b570c79f4adb0deabb63bcf3c49b78)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- netbase should only include etc-rpc, etc-protocols, etc-services
and the hosts file
- the init script/configuration files should be in another package
(init-ifupdown)
[YOCTO #2486]
(From OE-Core rev: 5ce5c3d1226d4a8a4997c63acc1b1b125770d005)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop patches that are applied upstream
Fix the license checksums for changes in LICENSES file
the new changes add more copyright notices that were missing earlier
Moving ports is no longer needed since ports is now part of libc proper
Refresh tzselect-sh.patch to accomodate upstream changes
C++ headers discovery relative to target sysroot is fixed differently
upstream hence we drop use-sysroot-cxx-headers.patch
aarch64 support is already available in 2.17 hence drop the local
patches
(From OE-Core rev: 83b6fe6d91b924be5a7676e6ee973ce26b5eefc5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd related functionality is tested in latest git of uclibc
therefore lets use it as default provider for uclibc as its the
most tested version on master
(From OE-Core rev: db93f49c676f84d6d5ad54a9f1ed9be7ba6d5364)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Nothing appears to use this anymore, and it's been a very long time since there
was anyone expressing an interest in the alternatives.
(From OE-Core rev: f6f289c13b9da9c2793d1fd30456216db8afad64)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- remove PRSERV_PORT variable
- use 'hostname:port' as PRSERV_HOST format
- remove USE_PR_SERV variable
- one can activate PRS by setting PRSERV_HOST
[YOCTO #3744]
(From OE-Core rev: e00f49de8b1f79c3e07b887d257bd75a46052fa0)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backfilling DISTRO_FEATURES and MACHINE_FEATURES with _append statements happens
too late to use those variables with conditional inherits, like this:
inherit ${@base_contains('DISTRO_FEATURES','sysvinit','update-rc.d_real','',d)}
Instead, do the backfilling at ConfigParse time so that it happens earlier in
the parse, which results in that inherit behaving as expected when sysvinit was
backfilled.
(From OE-Core rev: 22429cdf79ed952072707a929643c7386fa7e056)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 9e7c64ca9afbf27edd0d35a1830ce55ee6d778ab broke all builds where
custom DISTRO_FEATURES were used.
Resulting images ended in non-bootable state due to lack of initscripts
(unless someone had sysvinit or systemd in D_E already).
https://bugs.launchpad.net/linaro-oe/+bug/1102910https://bugs.launchpad.net/linaro-oe/+bug/1099405/comments/12
(From OE-Core rev: 211e473432230765a48d7af9c66c8737a08cdec7)
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- use migrate_localcount.bbclass to generate AUTOINC entries
which are exported to LOCALCOUNT_DUMPFILE
- import the generated AUTOINC entries
- one can migrate LOCALCOUNT to AUTOINC by executing:
bitbake-prserv-tool migrate_localcount
[YOCTO #3071]
(From OE-Core rev: ffab86f13cafb10d8d6273b6af8cd9a3c84eae20)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed to to boot efl images on qemuarm,qemumips and qemuppc
these options were already defined for qemux86 and qemux86-64 and
therefore the images were booting fine for these two machines
(From OE-Core rev: 60e73068cf542c2134106fe6cfc5971874bbc766)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to add a build time dependency on virtual/update-alternatives,
however we can't just do DEPENDS +=, or we end up with various problems. To
work around this, in the anonymous python space we ensure we only do the
addition when the package does not provide virtual/update-alternatives and
it is a target package.
Also the system wide PREFERRED_PROVIDER was incorrect. It references a
runtime package, and not the recipe it should have. This has been corrected.
[YOCTO #3691]
(From OE-Core rev: 56a59ef12936dcc6464cf1d43dda6957a5aa8c65)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Tested-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a more generic way to set preferred provider for udev.
We expect to have multiple choices once we integrate other init
managers, and this way we can automatically set it considering
distro settings.
(From OE-Core rev: da13562af73d144b5782ee8d755e2249cd9d2d8c)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a more generic way to set the init manager since we
plan to support other init managers as well.
I will use this variable as a switch to turn on/off any
init scheme that we might support in the future.
By default we use sysvinit.
(From OE-Core rev: 87f06346728bda000c0c0f95312b6a0a1b149ab4)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since update-modules is obsolete, remove it from DISTRO_FEATURES.
[YOCTO #3598]
(From OE-Core rev: 5a404ba472c51cec8e13d79e073a1d104a747c44)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For qemu machines, connman should not configure
virtual wired interfaces. Wired interfaces (eth0)
are assigned static IP addresses by the virtual machine
manager (qemu). This packages places the eth0 interface in
a list of blacklisted interfaces, forbiding connman
administering wired interfaces for qemu machines.
(From OE-Core rev: cfd9ab0eff27a59b8b9e750a01565e2e7c94e801)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add override ability to qemu to allow qemu specific
configurations for any qemu machine.
(From OE-Core rev: 4ee668a558e5d4a6d14e29c9fe88b8bb642a16a9)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit adds macros for fbdev & modesetting X driver packages.
(From OE-Core rev: c412a4eaf17fa29a4f2280f8be1dcf95346217a6)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switch the default libc-headers to the 3.7 version. At the same time, remove
older versions of the headers to keep things simple and clear. All userspace
and kernel combinations should build and boot against this single lib-headers
version.
(From OE-Core rev: e7c9706d6a6777326a62e73bffdbb0f940792ff4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- skip the non-packagegroup allarch recipes in multilib_virtclass_handler
- extend PROVIDES/RPROVIDES for allarch recipes which are not packagegroups
- use variants from MULTILIB_GLOBAL_VARIANTS (lib32 lib64 libx32) to create
additional pkgdata files for multilib allarch: ${pkgdatadir}/${variant}-${PN}
and ${pkgdatadir}/runtime/${variant}-${pkg}
- use variants from MULTILIB_VARIANTS to create additional pkgdata files
for multilib kernel/module-base recipes
- add a sanity check to determine if the current multilib is in
MULTILIB_GLOBAL_VARIANTS
[YOCTO #2918]
[YOCTO #3440]
[YOCTO #3565]
[YOCTO #3568]
(From OE-Core rev: bc4da2573dfb59ea2fc4af359701818df20f7663)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Import var ROOT_HOME to configure root home directory dynamically.
[Yocto 2683]
(From OE-Core rev: a78cd0b3a69b829327cea035321051ab11cba70f)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* resolves ERROR shown when bitbake -S is used for image:
ERROR: Bitbake's cached basehash does not match the one we just generated
(/OE/oe-core/openembedded-core/meta/recipes-core/images/core-image-minimal.bb.do_rootfs)!
ERROR: The mismatched hashes were 8c35cdf8a5d09c03941f081dd9f6d8dc and b5d6e2e5952770557c48c5779ddb73fc
(From OE-Core rev: 084d16cd00365ac3db9010a2e0e08ec49b50a144)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are several overrides that don't make sense as part of FILESPATH. This
introduces FILESOVERRIDES and allows us to drop some of the pointless ones,
simplifying the files search path further and improving the user experience.
If needed by specific recipes, other overrides can be added back in for
specific cases.
(From OE-Core rev: b8b1b39961332c99d62ee466f7859bd62a0f806f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* like we have with tune-armv7at-neon
(From OE-Core rev: 3337b695ca3af5b894d9c61436c61a1d1750f089)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This work was made by Victor Enriquez and then modified by Denis Carikli
who was helped by Mark Hatle comments. And in the end modified by Martin
Jansa to support different ARMPKGARCH and removed explicit -novfp suffix.
The changes are for adding support to armv6-novfp, for building binaries
for armv6 machines without vfp, for example the htc dream.
(From OE-Core rev: 0733e2f8ad82b426c8c40ef753adb9431fa3c359)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Signed-off-by: Víctor Enríquez <victor.quicksilver@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* without this patch it does apply --fix-v4bx not only to armv4, but
also all higher (because they also have armv4 in TUNE_FEATURES)
* it causes SIGILL on armv4t
http://lists.linuxtogo.org/pipermail/openembedded-devel/2012-November/042298.html
* someone please test on armv4 device (I tested only bitbake -e output
that it's correctly applied with DEFAULTTUNE == armv4
* maybe we can should fix this in binutils instead (both 2.22 and 2.23
are affected)
(From OE-Core rev: efe03fc00fc051bede69ced6643a8f25d02eabde)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* that we always use TUNE_FEATURES_tune-arm* variable and add only one TUNE_FEATURE to it
* for bigendian always use littleendian counterpart and append bigendian TUNE_FEATURE
(From OE-Core rev: 1bc205f895c8143e0bde3c4ba0e699cc0b2f0de8)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bigendian should not include little endian PACKAGE_ARCHS
(From OE-Core rev: 42e18249b02280de28fb7159b11e3c7c78a6cb03)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* e.g. arm926ejs DEFAULT tune is compatible with all PACKAGE_EXTRA_ARCHS_tune-armv5te, but needs to list arm926ejs with all possible suffixes too
(From OE-Core rev: ee3e85e3bdd382aca4ad8e2eece44064ee89dcff)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* hf/t/neon/b suffix is added by other ARMPKGSFX* variables, should not be
part of ARMPKGARCH, otherwise resulting TUNE_PKGARCH have that suffix twice,
e.g. cortexa8hf-neonhf-neon
(From OE-Core rev: 007a0dec82a33b01541c7f6fcad5d28c47a318ba)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The build summary is meant to reflect key configuration variables. Information
about the build system we're running on is important but currently missing
from the information displayed.
Printing TARGET_SYS removes the need to print TARGET_OS and TARGET_ARCH
and we add BUILD_SYS and NATIVELSBSTRING to show information about the
build system.
[YOCTO #3456]
(From OE-Core rev: 764cc1eb3043c84121f597d2271108b91052095e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
FILESPATH is the preferred way of finding files now. Having a value
for FILESDIR which defaults to paths which will have already been
searched is pointless at best. This is the final step in letting
us drop FILESDIR support entirely from bitbake at some future date.
(From OE-Core rev: d6e5ceafcaef06b8a3f9acc2aa826a40a016f913)
(From OE-Core rev: 3bb5c6bd51c91ada7fc17451627b8954dbe9c09c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this is mostly for backwards compatibility and to share binary feed
like it was before, but now without missing different -mtune in it
* if you want to build some package with -mtune add something like this
to your distro config
DEFAULTTUNE_qemuarm_pn-openssl = "arm926ejs"
DEFAULTTUNE_qemuarmx_pn-openssl = "xscale"
be aware that if you do this you should do it also for all packages
which depends on openssl because if you dont and you build e.g. dhcp,
then dhcp build for arm926ejs (even with DEFAULTTUNE armv5te) will
depend on openssl with arm926ejs, so dhcp in armv5te feed will be
rebuild after each MACHINE switch.
* cortexm3, cortexr4, iwmmx and ep9312 are using own DEFAULTTUNE because
they define also different -march
* shared feeds are
armv4t: arm920t, arm9tdmi
armv5te: arm926ejs, xscale
armv7a-neon: cortexa8, cortexa9
(From OE-Core rev: a11bdc36a1be18cc5aa14682b2a2c9ee83141f51)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* without this tune-xscale and tune-arm926ejs were both creating
packages in armv5te feed, but each with different -mtune, with
OEBasicHash enabled it was causing each package to rebuild with new
-mtune after MACHINE switch, but that doesn't make sense with output
stored in the same armv5te feed
* this makes different feed for each -mtune, but more generic one to be
selected with DEFAULTTUNE
* tune-iwmmxt and tune-ep9312 were already using this, just move it
bellow AVAILTUNES and use ARMPKGARCH_tune-foo syntax
* tune-cortexr4 and tune-cortexm3 are using armv7r/armv7m as ARMPKGARCH
because there isn't another tune to use the same -march
(From OE-Core rev: cffda9a821a3b83a8529d643c567859e091c6846)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* tune-foo is not valid override, for it to work I had to add
ARMPKGARCH = "${ARMPKGARCH_tune-${DEFAULTTUNE}}"
but that doesn't work without value defined for every supported
DEFAULTTUNE value, otherwise it's expanded like this
TUNE_PKGARCH (${ARMPKGARCH_tune-armv5te}te).
(From OE-Core rev: 31e4f2dee990ee7f5d7491b65565e71d7d580209)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* we don't care about expression but value
* e.g. tune-xscale and tune-arm926ejs have different expression
in TUNE_CCARGS but with the same DEFAULTTUNE the result is the same
http://lists.linuxtogo.org/pipermail/openembedded-core/2012-September/030032.html
(From OE-Core rev: 03f1e34ea3ce80931e9c3cd2ab22824f28a7233b)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* probably copy&paste error from tune-cortexm3.conf
commit 789dcb8e68a2ab9784ac10ab36815010c61af2fc
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Mon Jul 25 19:03:24 2011 +0100
Add ARM tune file overhaul based largely on work from Mark Hatle
(From OE-Core rev: 4827232077e4a059d6aa818f89c83c42bb91949a)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* without this you'll get different sstate checksum for webkit-gtk and
cairo even when you build them with DEFAULTTUNE == armv5te
* maybe this isn't needed at all anymore or if it is then it should be
applied in arm-armv5.inc for all armv5te devices, not only xscale?
(From OE-Core rev: c51643a510da6d1c3426b3de8f18ae864cb073a4)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit d6e5ceafcaef06b8a3f9acc2aa826a40a016f913 since
the value is clearly still being used in local file urls that are
only hit at do_unpack time.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
FILESPATH is the preferred way of finding files now. Having a value
for FILESDIR which defaults to paths which will have already been
searched is pointless at best. This is the final step in letting
us drop FILESDIR support entirely from bitbake at some future date.
(From OE-Core rev: d6e5ceafcaef06b8a3f9acc2aa826a40a016f913)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch contains several aditional changes:
* removed one backported patch (included in the new release);
* changed mips64-compiler.patch to apply properly;
* licence checksum for COPYING file changed: some copyright years have
been changed;
* bump PR in xorg-driver-common.inc so that all input/video drivers
get rebuilt. That's becaue the ABI changed;
The following external modules are now built-in:
* DBE
* DRI2
* DRI
* RECORD
The extmod module was completely removed.
(From OE-Core rev: 506da0d139dd470475a1d6b2dd3ae62406c36816)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means some of the hacks we have to tell where the package name ends and
the version starts in the directory layout becomes obsolete, simplifying the
work of some of the cleanup scripts. It also makes the layout slightly more
intuitive to the user.
It does force a rebuild onto the user but it will reuse sstate successfully.
(From OE-Core rev: 05075cf3138d1c61f5cf4fe0e1a4587acc00c692)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
remake PROVIDES make, so we need a default provider.
(From OE-Core rev: 9af884d433d18582b14977eb340cfdfa4801e7fe)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As we move to systemd, udev is not provided by systemd where the arch
independent files are stored in /lib and /usr/lib and not in
${base_libdir} and ${libdir} which means the files like udev rules
go into /lib/udev or /usr/lib/udev. This patch adds these paths
to be packaged into default ${PN} output package from a recipe
(From OE-Core rev: 6cbc0c7bf3f35e18f0abd29e5a704fba55f88ab2)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The overrides virtclass-native and virtclass-nativesdk are deprecated,
which should be replaced by class-native and class-nativesdk.
[YOCTO #3297]
(From OE-Core rev: 651c6fd6ef8be17ecba53f8054d24d1077198d5b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemd_unitdir indicates the arch independent
files which are basically scripts and unit files
and systemd wants then to be in /lib always even
when base_libdir is /lib64, hence we have to reflect
that and not use base_libdir to define it. Otherwise
on architectures where base_libdir is lib64 e.g. ppc64
or multilibbed x86_64 this wont work
(From OE-Core rev: 50e713d4ae35f9b5f5f2a515a95d77573610d707)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The n32 architecture is odd, in that it's a mips64 ABI which happens
to be 32-bit. To handle this, we need something in the environment
which can be used to distinguish it. The obvious place to stash this
is the ABI suffix, so we use "n32" as an ABI suffix. This allows
a couple of improved checks:
1. In insane.bbclass, we can use "linux-gnun32" to discern that it's
okay for a mips64 binary to be a 32-bit binary in some cases.
2. In multilib_header, we can check for the n32 ABI, and use a distinct
value.
3. In siteinfo, add linux-gnun32 as a synonym for linux, similar to
what's done for linux-gnux32, and tell the mips*-linux-gnun32 variants
to pick up the corresponding mips-linux site configs.
Note that the multilib header wrapper already has n32 hooks in it, there
was just nothing creating -n32 header variants.
(From OE-Core rev: c8e8e8ba22eaa335ac72f0e5b317f804035133e2)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Break the following 3 very long lines into 3 pieces, make a line under
80 characters, will modify BB_HASHBASE_WHITELIST and
BB_HASHCONFIG_WHITELIST in the next patch:
BB_HASHBASE_WHITELIST
BB_HASHCONFIG_WHITELIST
BB_SIGNATURE_EXCLUDE_FLAGS
[YOCTO #3299]
(From OE-Core rev: 1417f606982c591178dd408a7ef79f449a6e2554)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* bitbake uses PACKAGES_DYNAMIC as regexp
^ could make matching faster (and it will be more clear that we're expecting regexp not glob)
* made all those last '-' optional, use .* (or nothing)
(From OE-Core rev: 2f3ebdfa5f42dae51063b043cc4b0fbe20b40064)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mesa-dri is an empty package, so depending on it doesn't achieve anything.
(From OE-Core rev: a41f8341971a958cf55c07f3c91e1742570053cd)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to be more compliant with the Filesystem Hierarchs
Standard (FHS), this change removes the /usr/libexec default
in favor of ${libdir}/${BPN} (which is typically /usr/lib).
http://www.pathname.com/fhs/pub/fhs-2.3.html
This also address the native and STAGING variations
[YOCTO #2915]
(From OE-Core rev: 68c31b095a1cb20bd297df596024fc568614f5e8)
(From OE-Core rev: 406bd38b4232f9f399ef5ffe0b4fac72ed605a23)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The update-modules mechanism is something of a historical relic and it isn't
entirely clear that it has a great deal of value nowadays. Also, it causes a
problem when building a read-only rootfs since update-modules itself refuses
to configure offline.
Allow DISTROs to circumvent this whole thing by declaring (via DISTRO_FEATURES)
that they don't wish to use update-modules. This is backfilled for existing
distributions and will have to be marked as CONSIDERED by those who actually
don't want it.
(From OE-Core rev: 14bf8ed115453077b4d4042b4b70ed6b3bca2a9f)
Signed-off-by: Phil Blundell <pb@pbcl.net>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If CCACHE is in the whitelist then CCACHE_DISABLE probably should be too.
(From OE-Core rev: c03f76160e3cc3cb4fbf3cee114665c34bff06e6)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We assume chrpath is provided natively so it should be listed in ASSUME_PROVIDED.
(From OE-Core rev: 97a3ea712003e8d48dc68c282e656591f39d2d1a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the STAGING_DIR_KERNEL is set in the multilib.conf, then it may be
set incorrected. The evaluation happens before TMPDIR and LIBC are
defined in other components.
Moving the definition process to the multilib.bbclass ensures that
everything has been loaded before it is set.
(From OE-Core rev: 6bd87edc383b40e300b0ef4bf851c39b698305cd)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also supports a new altivec TUNE_FEATURE
(From OE-Core rev: 4586c24ad156773568cd38794936b8af62e862be)
Signed-off-by: Matthew McClintock <msm@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This requires the changes to bitbake.conf that allow parsing of
license.conf.
As we should now be parsing license.conf, we can move some globals
out of license.bblcass and into the conf file.
(From OE-Core rev: 03e6a7cd27ed109a011fac09cf04412f87f31c3a)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
license.conf hasn't been being parsed. It probably should be.
(From OE-Core rev: b393b31fee3b4d42890c2bcbba09ea231c131dea)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set LAYERVERSION and rename the collection to "core". Given changes such
as the tabs to spaces cleanup for python functions in the current
version, this allows other layers to depend on this version of OE-Core
specifically should they choose to do so, by specifying the following
in their own layer.conf:
LAYERDEPENDS_layername = "core:1"
Where layername is whatever value is being added to BBFILE_COLLECTIONS.
(This change does nothing unless a layer has LAYERDEPENDS set.)
(From OE-Core rev: 7069c7ef829f56ae6dd0dab5e583342f351274ed)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids the hardcoding of ${libdir}/locale which is all over the place,
and will facilitate use of ${exec_prefix}/lib/locale instead of
${libdir}/locale.
This doesn't actually change any output at this time. Verified this with
buildhistory against the packages produced from core-image-base.
(From OE-Core rev: b744f4cc2912334b8493a89525fd02af8e9b8edf)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have been adding this option to paper over a bug in old toolchain
http://hardwarebug.org/2008/11/28/codesourcery-fails-again/
e.g. is one but these have been weeded out. Therefore let gcc
take the default vectorization optimizations
(From OE-Core rev: e4336ab56db1e07a7f3dc08d3a4de3593b0fad22)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The globs used for STAMPCLEAN were too greedy matching gcc-cross-initial
stamps for gcc-cross for example. This patch resolves that problem making
the assumption that PV starts with something numeric. This assumption
should hold in most cases and has a better failure case that the current
situation.
(From OE-Core rev: d7fbc70b6c6ac629d2a23ac16ab45461f88b4b26)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This takes advantage of new bitbake functionality to clean up stale stamp
files when creating new stamp files.
[YOCTO #2961]
(From OE-Core rev: e21b6c04e512a3bc2339a20045b7041f1d26e859)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, SRCPV is just listed as having a value of ${@bb.fetch2.get_srcrev(d)}
which isn't helpful. This can mean that if PV changes, two recipes can have the
same sstate checksum despite having different PV values since the PV value itself
isn't tracked anywhere.
Adding this line means that the real PV value is expanded and recorded in the sstate
checksum, meaning the sstate packages no longer overlap. This is critical in ensuring
consistent builds for revipes using SRCPV.
(From OE-Core rev: a9fffadec4fb60547257cb3d7496b6e39ed07be8)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It has been pointed out several times that the yocto mpc8315e-rdb
reference was using the wrong tuning (603e), since it is actually
a e300c3 board.
This commit creates a e300c3 tune file based on the e300c2 variant
already in oe-core.
This commit also inhibits altivec in flac when this new tuning is
enabled and used by the mpc8315e-rdb
[YOCTO #1192]
(From OE-Core rev: 8663c7ba0530eb36728fe524ed0137e064cc1c5a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* add new packagegroup-core-x11-server to SIGGEN_EXCLUDERECIPES_ABISAFE,
so that recipes depending on it are not rebuilt after every machine
swtich
* allows to remove task-x11-server and task-x11 from meta-oe without
loosing any functionality
* be carefull with default XSERVER value which does not have
xf86-input-mouse and xf86-input-keyboard)
* VIRTUAL-RUNTIME_xserver_common which defaults to x11-common in oe-core
and xserver-common in meta-oe's task-x11
(From OE-Core rev: a398c96706c119f298f57a929a317fcf8e0f5b92)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* now with subversion-native we know those 2 options are supported
* with https protocol used for SVN checkouts we cannot confirm certificate and do_fetch fails
Error validating server certificate for 'https://foo:443':
- The certificate is not issued by a trusted authority. Use the
fingerprint to validate the certificate manually!
Certificate information:
...
(R)eject, accept (t)emporarily or accept (p)ermanently? svn: E175002: Unable to connect to a repository at URL 'https://foo/trunk'
svn: E175002: OPTIONS of 'https://foo/trunk': Server certificate verification failed: issuer is not trusted (https://foo)
ERROR: Function failed: Fetcher failure for URL: 'svn://foo;protocol=https;module=trunk'. Unable to fetch URL from any source.
(From OE-Core rev: 8f1cedaaafd1248e77db84ac238fa88a318df2e9)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently gettext and eglibc compete to provide for libintl on
nativesdk. So make choices to select eglibc nativesdk to provide
for both eglibc as well as uclibc based systems.
(From OE-Core rev: 1e7797a0a8e8fd565d218bd7b9993e16f158764f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"Package group" is a much more appropriate name for these than task,
since we use the word task to describe units of work executed by
BitBake.
(From OE-Core rev: 424dcf7046e4ad09dcc664eb1992201195247fcf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As discussed on the mailing lists, using a suffix to package names is
hard and has lead to many recipes having to do PKGSUFFIX games. Its
looking extremely hard to scale nativesdk much further without hacking
many recipes.
By comparison, using a prefix like multilib does works much better and
doesn't involve "hacking" as many recipes. This change converts nativesdk
to use a prefix using the existing multilib infrastructure.
(From OE-Core rev: 81813c0e322dc04ce4b069117188d8a54dfddb8c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the ia32-base.inc moved over from meta-intel. See meta-intel
for the complete history of contributions to this file.
Here's the initial commit text that explains the purpose of this file:
The meta-intel BSPs currently have a number of machine settings common
to all - factor these out into a common include file.
Also add several new intel-specific XSERVER variables for building
XSERVER variables in BSPs.
(From OE-Core rev: 9a8b4fcac639404caa8ac87717118b3380239838)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The parallelism flags should not change the parse hash.
(From OE-Core rev: 6bfd4a6abd7488e663598620f4436ac49183528f)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BB_ENV_EXTRAWHITE is set by the bitbake wrapper script but not by
bitbake-layers, and thus it was affecting the data hash and thus
invalidating the cache. Any variables passed through from the
environment by being added to this variable should themselves
influence the hash already if they are not already excluded from,
the data hash, so BB_ENV_EXTRAWHITE can be excluded.
Similarly, DISABLE_SANITY_CHECKS is set by the hob script in order to
have sanity checks run later, but not set by the bitbake wrapper script.
It doesn't actually affect the build itself and so its value can also
be excluded from the data hash.
These changes prevent unnecessary reparsing between executions of
bitbake, bitbake-layers, and the initial pseudo build within the hob
script.
Fixes [YOCTO #2680].
(From OE-Core rev: 84bcacd5b4737520f0fc76333f0165ef5b87c207)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wihtout it, you have both mesa-dri and mesa-xlib as providers. Let's
prefer the accelerated version.
(From OE-Core rev: 9f83d93c65942f9ed1b25a24976f92ae06c425c8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was done this way so that the current machine configuration
would remain unaffected.
The rtc MACHINE_FEATURE will specify if a real time clock is avalaible.
(From OE-Core rev: 4a8232d959e24e73998d7541c4a524774387cabf)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is works the way DISTRO_FEATURES_BACKFILL does.
(From OE-Core rev: bdf90789431f1a8e076fe33c8bfd19c7269d6dad)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function was modified in order to be used with other
variables then DISTRO_FEATURES. Use this new function name and
add the parameter needed.
(From OE-Core rev: a1ff96ae006accb08c58ad77d37c9e249ab94d57)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* we should probably wait until
http://git.openembedded.org/bitbake/commit/?id=1e06d8012868ba5a31503dc99cbf18570be629d9
is in next required bitbake version, but error message if the directory doesn't exist is quite clear
* people with new enough bitbake could just change this in their local.conf
(From OE-Core rev: a1e4d32ede287f73c6acc796b43fe5b90c072fab)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
RP: The list of recipes in multilib.conf needs to go away and we need
to just be able to extend all recipes with the multilib class.
Tested by building and running lib32-core-image-sato-sdk.
[YOCTO #1563]
(From OE-Core rev: 5d691f1bc95dfb9109b07827b33957b1fa5b2fa4)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We use -mtune flags which lets our application have
SPE intruction in them which is a good thing but when
running qemu especially in user mode these application
wont work with default powerpc emulation. Therefore we
have to add proper -cpu option to let qemu emulate for
a given cpu.
(From OE-Core rev: 695598415b4e9e17def7f04332bdbc0d24cc1efc)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The intent of the uImage code in this class includes the following
1) be able to specify custom load addresses without needing to patch the kernel
2) add better information to the uImage description field
The current state is a NOP anyway, the kernel will always build a uImage when you tell it to 'make uImage'.
weakly Set KEEPUIMAGE to 'yes' in default-distrovars.inc which preserve the
current OE-Core behavior. Machines which are being ported from oe.dev and need to
regenerate uImage can set this to be empty
(From OE-Core rev: 72a7049526ee107005bd39c7bdd814ed71345829)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. STAGING_KERNEL_DIR was getting an invalid MLPREFIX. Fix this by forcing the expansion in multilib.conf.
2. Added multilib rule for 'perf'.
(From OE-Core rev: 71907775f601f0a48b995cc3277b61645d2e5068)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bb and os modules are always imported so having these extra import calls
are a waste of space/execution time. They also set a bad example for people
copy and pasting code so clean them up.
(From OE-Core rev: 7d674820958be3a7051ea619effe1a6061d9cbe2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many recipes are now having to define PERLPATH and PYTHONPATH variables.
Creating USRBINPATH in bitbake.conf means we can remove all these lines
from the many recipes now needing this and simplify the code changes
needed in each case, reducing the chance of errors being introduced.
Also fixup glib python binary location issue and fix function indentation.
(From OE-Core rev: cf63d9068c3a8c635dfc240d30dfff278be9b0e2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Originally, git was something new, not installed everywhere and had commandline
stability problems. This has changed and git it no longer makes sense to
continually build this when the system installed version is likely sufficient.
This speeds up build since recipes no longer have to wait for git-native to build
if they're fetched from a git:// SRC_URI.
Also add git to the sanity checks and drop the no unneeded svn reference.
(From OE-Core rev: 79e24186481770181565a18d177584d0d72399fe)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A couple of boards use chips which perform noticably better
when optimized for the 476. Add a trivial tune file to let
them run better.
(From OE-Core rev: 9ac6da9d0e0b9f7678752ff7b9c91e39c140b4e7)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This completes the removal of these older variables and their replacement
with FETCHCMD. This change requires the latest bitbake to operate optimally.
(From OE-Core rev: 7dd2a12ebe49865720dcea60cd2ed13205c0c4fd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This brings it into sync with the wget FETCHCOMMAND and RESUMECOMMAND
variables.
(From OE-Core rev: 0f8290ff1c9bc86c744f67ce6194dd6911533012)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The svn fetcher converted to use FETCHCMD a long time ago. This drops
several variables which are effectively useless.
(From OE-Core rev: 34a8cdafee145d04f8b526b094341c34cf36ba1b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This project has been unmaintained for some time, and even the OpenMoko
project is not using it any more (in favour of FSO). Since we have ofono
in OE-Core which replaces and surpasses its functionality, we can remove
libgsmd.
(From OE-Core rev: 4cd880c61e9d74dbf1a747f3654239cadadf45ce)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu.inc does a straight assign to MACHINE_FEATURES so overwriting the
preceding append to MACHINE_FEATURES, so the MACHINE_FEATURES append
needs to be moved after the include.
This situation came about as a result of commit 71a4bf386:
qemumachines: Enable xserver-xorg as default xserver
For qemux86 and qemux86-64 include qemu.inc after defining XSERVER
which missed this side-effect (and maybe others).
(From OE-Core rev: 4f336e5f416df382fdd2b405314741164d537b22)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By doing this we can easily add addtional packages that can be
greedy before PN, but after some of the other standard packages.
This will also allow us to simplify the lib_package class to set
this variable.
(From OE-Core rev: b41b2bc584756956a48c9c5f91e7337e821105b2)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #1614]
Add the kernel headers to the kernel-dev package. This packages what was
already built and kept in sysroots for building modules with bitbake.
Making this available on the target requires removing some additional
host binaries.
Move the location to /usr/src/kernel
Before use on the target, the user will need to:
# cd /usr/src/kernel
# make scripts
This renders the kernel-misc recipe empty, so remove it.
As we use /usr/src/kernel in several places (and I missed one in the
previous version), add a KERNEL_SRC_DIR variable and use that throughout
the class to avoid update errors in the future.
Now that we package the kernel headers, drop the
kernel_package_preprocess function which removed them from PKGD.
All *-sdk image recipes include dev-pkgs, so the kernel-dev package will
be installed by default on all such images.
(From OE-Core rev: 6125ea40d4483965f793bd847b3ce14b668a5b1e)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pcmciautils is the appropriate PCMCIA package these days.
(From OE-Core rev: 5066f7e9750253bc4678f2884e15f0333e60932b)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This enables a switch to subversion 1.7 now bitbake is able to cope with
upgrading existing working copies. The impact of this change should be
minimal since we don't have many subversion recipes now.
(From OE-Core rev: ac0aa35ba6d7a21636bdd23d45ae0bf8112bdaa8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 935a7f3847bd86ed78418db5cb6dd98ac0b6e65d)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
USE_NLS is generally defined for uclibc based system builds
and generally its defined to 'no' there. However this variable
does not exist at all for eglibc/glibc distributions. This
patch adds a weak definition to 'yes' on eglibc based system
builds. This will ease out some of the cryptic contructs we
have to define certain options based on USE_NLS and also
checking got uclibc at the same time to avoid pythong exceptions
when its not defined.
(From OE-Core rev: 41db1bf69314e542a9d7ac1fb1b4bc65db75b642)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The autogen-native built error on FC17:
ccache: failed to create /dev/null/.ccache
This is because the default gcc command of FC17 is a symlink to ccache,
so the ccache will always be used regardless to the setting of CCACHE,
ccache uses $HOME/.ccache as the CACHE_DIR by default, but autogen set
HOME=/dev/null, so the error happens.
Disable ccache explicitly if it is not enabled would fix the problem,
otherwise it would always use ccache regardless to the setting of CCACHE
on Fedora 17.
The ccache 3.1.7 has a bug, it would always create $CCCHE_DIR/.ccache
even CCACHE_DISABLE=1.
Unset CCACHE_DISABLE in ccache.bbclass, since ccache only checks whether
there is a CCACHE_DISABLE in the environment or not, it doesn't care about
its value, so we need unset it explicitly when enable ccache.
[YOCTO #2554]
(From OE-Core rev: dd2bab9b6a973d8086dfb6282e781fd79d30b05a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This switches to use the hash based signature generatior and update
layout_abi to match stamp file layout changes.
Angstrom and Poky did this a while ago. This brings the OE-Core defaults
into line with what is the best common practise at this point. Its been
discussed on the mailing lists and by the TSC at length, this just completes
the transition.
(From OE-Core rev: 4199efed48005a62267fa3374c33b13627d85f44)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bitbake wrapper script is set up such that the -p (--parse-only)
command line option is not executed under pseudo, and it sets the
PSEUDO_BUILD variable to indicate whether or not pseudo is being used.
Since PSEUDO_BUILD is allowed through into the environment via
BB_ENV_EXTRAWHITE it influences the data hash and thus if you run
"bitbake -p" and then run bitbake again to actually build something, the
change to PSEUDO_BUILD causes the cache from the -p execution not to be
used. This is fixed simply by adding PSEUDO_BUILD to
BB_HASHCONFIG_WHITELIST in bitbake.conf so that it doesn't influence the
data hash.
Fixes [YOCTO #2600].
(From OE-Core rev: 1e50225df2d6b5f10c5648703282235a11b1efb3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we now have PN as the end of the package list, we can almost get rid of
lib_package, each recipe can just add PACKAGES =+ PN-bin instead of the inherit
(From OE-Core rev: 7acdd6177fda4643d2f04f45eb7490e45a3d491e)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change re-orders the PACKAGES list to move PN to the end of the list
this will ensure that base package gets the final bits since the packaging
is greedy. We can then have -dev and other package get bits first.
(From OE-Core rev: 66c36bcb7d9368718453265e58bd5e3c854c786a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the multilib support for this package to multilib.conf because error will
appear when building an lib32-core-image-lsb without this patch.
[YOCTO #2571]
(From OE-Core rev: 264425b0a54806c08c218bd8b500c20b8c3152f4)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton
Saul Wold
Khem Raj
Elizabeth Flanagan
Ross Burton
Diego Rondini
Richard Purdie
Andrei Dinu
Andy Voltz
Robert Yang
Bruce Ashfield
Martin Jansa
Kang Kai
Tomas Frydrych
Phil Blundell
Andreas Oberritter
Andreas Müller
Anders Roxell
Laurentiu Palcu
Christopher Larson
Chase Maupin
Olivier Guiter
Denys Dmytriyenko
Holger Hans Peter Freyther
Constantin Musca
Marcin Juszkiewicz
Mark Hatle
Radu Moisan
Cristian Iorga
Nitin A Kamble
Víctor Enríquez
Peter Seebach
Phil Blundell
Mike Crowe
Matthew McClintock
Tom Zanussi
Damien Lespiau
Andrei Gherzan
Bogdan Marinescu
Koen Kooi
Darren Hart
Robert P. J. Day
Valentin Popa
Xiaofeng Yan