If a user uses the -e option and specifies a machine that hasn't been
built or uses the wrong .wks script for the build artifacts pointed to
by the current machine, we should point that out for obvious cases.
(From OE-Core rev: a5b9ccadc0603c70c65f74fa386995c585a951db)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since eight unique files import rpm, perform a check at the top level
for the existence of the rpm module print a sensible error message if it
is not. This may be able to be removed if some of the core rpm
dependencies are removed from the mic libs.
Also check for urlgrabber.
This avoids a bracktrace in the event the modules are not installed
which can be very off-putting to would-be users.
(From OE-Core rev: b11bfadba20c1f39a63e396e605a8316c2ed2a94)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If fat16 is specified to the mkpart parted command, parted will
default to setting the lba flag which causes certain EFI firmware
to fail to detect the filesystem. lba shouldn't be necessary for
FAT16 filesystems anyway, explicitly disable it.
(From OE-Core rev: 30442d432e203e655b7d40b93f7307f475de1614)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure they exist - complain if they don't.
(From OE-Core rev: 24a585e3fd0ea0166991a6aa834bba15bcd8295d)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic needs to be given one form of build artifacts or another -
complain if the user doesn't do that.
(From OE-Core rev: 9116a17efd42447f276000927d0c2ea63776865b)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current find_bblayers() code finds and parses the BBLAYERS
variable manually, and therefore doesn't handle variable substitution,
which causes problems if used.
This change makes find_bblayers() use the variable-substituted
BBLAYERS instead.
Fixes [YOCTO #5106]
(From meta-yocto rev: 1629ac04e909143dc2c275c256094cb44c6cc43c)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reuses the mic/livecd infrastructure but heavily subclasses and
modifies it to adapt to the special needs of building images from
existing OpenEmbedded build artifacts.
In addition to the OE-specific mic objects and modifications to the
underlying infrastructure, this adds a mechanism to allow OE kickstart
files to be 'canned' and made available to users via the 'wic list
images' command.
Two initial OE kickstart files have been added as canned .wks files:
directdisk, which implements the same thing as the images created by
directdisk.bbclass, and mkefidisk, which can essentially be used as a
replacement for mkefidisk.sh. Of course, since creation of these
images are now driven by .wks files rather than being hard-coded into
class files or scripts, they can be easily modified to generate
different variations on those images. They also don't require root
priveleges, since they don't use mount to create the images. They
don't however write to media like mkefidisk.sh does, but rather create
images that can be written onto media.
(From OE-Core rev: f87acc5e59d3c2c39ff171b5557977dab4c8f4a6)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the starting point for the implemention described in [YOCTO
3847] which came to the conclusion that it would make sense to use
kickstart syntax to implement image creation in OpenEmbedded. I
subsequently realized that there was an existing tool that already
implemented image creation using kickstart syntax, the Tizen/Meego mic
tool. As such, it made sense to use that as a starting point - this
commit essentially just copies the relevant Python code from the MIC
tool to the scripts/lib dir, where it can be accessed by the
previously created wic tool.
Most of this will be removed or renamed by later commits, since we're
initially focusing on partitioning only. Care should be taken so that
we can easily add back any additional functionality should we decide
later to expand the tool, though (we may also want to contribute our
local changes to the mic tool to the Tizen project if it makes sense,
and therefore should avoid gratuitous changes to the original code if
possible).
Added the /mic subdir from Tizen mic repo as a starting point:
git clone git://review.tizen.org/tools/mic.git
For reference, the top commit:
commit 20164175ddc234a17b8a12c33d04b012347b1530
Author: Gui Chen <gui.chen@intel.com>
Date: Sun Jun 30 22:32:16 2013 -0400
bump up to 0.19.2
Also added the /plugins subdir, moved to under the /mic subdir (to
match the default plugin_dir location in mic.conf.in, which was
renamed to yocto-image.conf (moved and renamed by later patches) and
put into /scripts.
(From OE-Core rev: 31f0360f1fd4ebc9dfcaed42d1c50d2448b4632e)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Initial implementation of the 'wic' command.
The 'wic' command generates partitioned images from existing
OpenEmbedded build artifacts. Image generation is driven by
partitioning commands contained in an 'Openembedded kickstart' (.wks)
file specified either directly on the command-line or as one of a
selection of canned .wks files (see 'wic list images'). When applied
to a given set of build artifacts, the result is an image or set of
images that can be directly written onto media and used on a
particular system.
'wic' is based loosely on the 'mic' (Meego Image Creator) framework,
but heavily modified to make direct use of OpenEmbedded build
artifacts instead of package installation and configuration, things
already incorporated int the OE artifacts.
The name 'wic' comes from 'oeic' with the 'oe' diphthong promoted to
the letter 'w', because 'oeic' is impossible to remember or pronounce.
This covers the mechanics of invoking and providing help for the
command and sub-commands; it contains hooks for future commits to
connect with the actual functionality, once implemented.
Help is integrated into the 'wic' command - see that for details on
usage.
(From OE-Core rev: 95455ae4251e06d66e60945092b784d2d9ef165c)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It should be possible to generate a disk to a file using a loopback
device with mkefidisk.sh, which is useful for booting simulators. To
make this possible the partitions for the loop back need to work
similarly to the mmc devices. The mkfs.vfat also requires and
additional argument to force it to write to something other then a
real disk.
Example:
qemu-img create -f raw bigdisk 4G
dev=`sudo losetup -f`
sudo losetup $dev bigdisk
mkefidisk.sh $dev tmp-eglibc/deploy/images/qemux86/core-image-minimal-qemux86.hddimg /dev/sda
sudo losetup -d $dev
Note:
Also a bug was fixed in the mkefidisk.sh where if the disk you are
writing to initially has an invalid label the size of the first
partition will be computed incorrectly. For the simulator disk
creation this is generally always the case, but this can happen with
real hardware as well.
(From OE-Core rev: 254899824900f2e8c6a34d2ad1b8cbea91acb4ae)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing -cpu host option caused kernel panics when people attempted to use
the kvm option. After research and discussion, the best options appear to
be the kvm32/kvm64 cpu types so lets use these instead. These resolve
the kernel issues for me.
[YOCTO #3908]
(From OE-Core rev: bdc6d3be6ffa4ed358153f9c9332b632324f5833)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Strings in Python 3, by default, are assumed to contain unicode
characters. In previous versions of python (<3), unicode strings are
explicitly declared with u"abc". If not, than they're automatically
converted to bytes. This doesn't happen anymore in Python 3.
Since we're dealing with binary files, opened in byte mode, make sure
that we explicitly convert all strings to bytes to make both python 2
and 3 happy.
Other changes:
* add a safety check to make sure relocation did not change the file
size;
* a couple of cosmetic changes (wrap long lines so that we don't have
to scroll to reach the end of them);
(From OE-Core rev: 175f20e27eadc79df16109961f5ce6232705e96f)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want the temporary file to be written in /tmp not the current
directory.
(From OE-Core rev: fcb40c11998030eb5fce89ce5a9ca567870aafa9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For Yocto 1.5, 3.10 is the preferred kernel and 3.8 is obsolete.
This also removes any mention of emgd from the templates - we want to
discourage users from using it - it will be obsolete soon in any case.
Fixes [YOCTO #5107]
(From meta-yocto rev: 4dd4bf6ac2dcc7652ec8f807df02298546bdb41b)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following commit, 6ccd4d6, increased the RAM size for qemu machines
to 256MB due to some smart sanity tests failing on autobuilder because
more memory was needed.
Unfortunately this leads to various, potentially dangerous, issues like
the one observed during sudoku-savant project compilation:
collect: relinking
collect2: error: '_ZNK6sudoku5ClearINS_6SquareEEclERS1_' was assigned to
'board.rpo', but was not defined during recompilation, or vice versa
board.o:(.rodata+0x8): undefined reference to
`sudoku::Clear<sudoku::Square>::operator()(sudoku::Square&) const'
board.o:(.rodata+0x20): undefined reference to
`sudoku::Clear<sudoku::Sequence>::operator()(sudoku::Sequence&) const'
board.o:(.rodata+0x34): undefined reference to `typeinfo for
sudoku::Action<sudoku::Sequence>'
...AND THE LIST CONTINUES...
collect2: error: ld returned 1 exit status
make: *** [sudoku-savant] Error 1
After some tests, I found that the maximum amount of memory needed for
sudoku to compile properly is 146MB(!?!).
My attempts to create a simpler test case (using templates), in order to
replicate and isolate the issue failed. All the tests compiled just
fine.
So, my guess is that this problem is certainly memory related but the
cause might be hidden in any of the following: qemu versatile hw model,
in the kernel or, highly unlikely but not impossible, the toolchain
itself. The reason I don't really think the cause is in the toolchain is
the fact that the compilation completes just fine for 128MB on qemuarm but
also on other qemu machines (with 256MB of memory).
Since this issue might need lots of time to have a proper fix, I'll revert back
to using 128MB for qemuarm for the time being.
[YOCTO #5133]
(From OE-Core rev: 06605bd6ddd4d6a788e1a107dcf15dde1027c094)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has now been superseded by testimage.
(From OE-Core rev: d469c92394a1a95ae7a45b8b80dc4c2918e0e9a6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The pkgdata stamps now need to be wiped away if the sysroot is destroyed.
(From OE-Core rev: e6ef8399cd8e97b9cd59855e11f1792445f0e65b)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we have a hierarchy of pkgdata directories and the code has to put together
a search path and look through each in turn until it finds the data it needs.
This has lead to a number of hardcoded paths and file globing which
is unpredictable and undesirable. Worse, certain tricks that should be
easy like a GL specific package architecture become problematic with the
curretn search paths.
With the modern sstate code, we can do better and construct a single pkgdata
directory for each machine in just the same way as we do for the sysroot. This
is already tried and well tested. With such a single directory, all the code that
iterated through multiple pkgdata directories and simply be removed and give
a significant simplification of the code. Even existing build directories adapt
to the change well since the package contents doesn't change, just the location
they're installed to and the stamp for them.
The only complication is the we need a different shlibs directory for each
multilib. These are only used by package.bbclass and the simple fix is to
add MLPREFIX to the shlib directory name. This means the multilib packages will
repackage and the sstate checksum will change but an existing build directory
will adapt to the changes safely.
It is close to release however I believe the benefits this patch give us
are worth consideration for inclusion and give us more options for dealing
with problems like the GL one. It also sets the ground work well for
shlibs improvements in 1.6.
(From OE-Core rev: 1b8e4abd2d9c0901d38d89d0f944fe1ffd019379)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows a clean seperation between image outputs from different
machines, and makes it possible to have convenience symlinks to make
the output ready to deploy.
This did require some surgery in runqemu; if explicit paths to the image
and kernel are not supplied then DEPLOY_DIR_IMAGE needs to be determined
from bitbake or set in the environment. However the script does try to
avoid requiring it unless it really is needed. Corresponding changes
were made in the automated testing code as well.
Based on an RFC patch by Koen Kooi <koen@dominion.thruhere.net>
(From OE-Core rev: 7e90261aec61f79680b5eaeaf5b18c7b795412a4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If not every combination of BB_NUMBER_THREADS and PARALLEL_MAKE have
been tested by bb-matrix.sh, e.g., by using BB_RANGE="04 08 10 12 16"
and PM_RANGE="04 08 10 12 16", then the graph that gnuplot generates by
default looks very jagged due to the missing data points. By using
splines to interpolate the missing data the graph looks a lot better.
This should not change graphs where all data points are available in any
way, only improve sparse graphs.
(From OE-Core rev: 9642c1314da64c70254f6b012aa73ef37bbaa33f)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes sure the the first build starts from a clean state. Otherwise
one could have the first build affected by any leftover state from
a previous build.
This also leaves a working state behind after the final build.
(From OE-Core rev: f8f86ac88aa1bba99ba28762cfbd97d3721da7d9)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per the similar commit in oe-core on the qemu machines, the templates should
respect the opengl DISTRO_FEATURE when adding mesa-driver-swrast to new qemu
machines.
(From meta-yocto rev: 8d42ea2b2566913642c759e48ffe1f5f5166c510)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the target sysroot of an SDK we can have target system absolute links
which don't make sense. This adds a script which fixes them up to become relative
paths instead.
[YOCTO #5020]
(From OE-Core rev: 57d6bdcad55c119e9ab8089d23d462436a0e4440)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
APM is not only obsolete, but also requires a kernel config enabled, which is not enabled by default
[YOCTO #5121]
(From meta-yocto rev: e25c43661f27b27e61aa7fae868237c1c60e3e25)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When runqemu tries to determine the MACHINE variable from a
kernel or vmdk filename that doesn't contain any known machine
name, the variable gets set to the filename. It should remain
unset and cause an error.
[YOCTO #2890]
(From OE-Core rev: 22c0668d9e0a22c095d78bab7b45ef4f803dd0d1)
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set memory size to 256M for qemuarm, qemux86, qemux86-64, qemumips,
qemumips64, and qemuppc.
This allows the smart automated tests to run on machines with a GUI
environment (such as Sato) running at the same time, for which 128M is
too limiting. Setting this in runqemu allows users manually using
runqemu to avoid the same out-of-memory issues under similar conditions
using smart, on-target compilation or other uses.
Fixes [YOCTO #5045].
(From OE-Core rev: fe5dfdece98692f8fa731c8d11c907a272266ea5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous changes were totally broken as quoting globs doesn't work. Remove
the quotes so the rm commands actually delete the stamps.
(From OE-Core rev: 5eca43debd7fbc861d41f4e260b37282915bd053)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This avoids the following new behavior resulting from the create_wrapper
fixes:
llc[11]$ ../poky/scripts/oe-setup-rpmrepo
/usr/bin/env: nativepython: No such file or directory
(From OE-Core rev: ce37ef05c14ba28773823d1f14f629c37c76d827)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The iptables rules for the tap interface are added by runqemu-ifup
everytime we use runqemu to start a qemu target. But it's not cleaned
up when runqemu exits.
This patch cleans up the remaining iptables rules for the tap interface
in runqemu-ifdown.
[YOCTO #5047]
(From OE-Core rev: ef38a0aed35357d035ca587162158cd2f55b958f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should provide the user more information if a preconfigured tap
is used. This is because the user might have manually set up the tap
interface to be used by other qemu binaries.
So at a minimum, we should let the user know how to make runqemu skip
that tap interface.
[YOCTO #5047]
(From OE-Core rev: ec08d92641cc51c567cc3745937b1839d3faa095)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu-ifup and runqemu-ifdown should be pairs. If we're using a
preconfigured tap interface, the runqemu-ifdown should not be invoked
to bring it down.
(From OE-Core rev: f60f215f74b5fe5a43943c9d3ccdbe0fa06b7828)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Run list-packageconfig-flags.py on wrlinux's platform in which
the oe-core layer and bitbake layer in different directories:
----
../layers/oe-core/scripts/contrib/list-packageconfig-flags.py
Traceback (most recent call last):
File "../layers/oe-core/scripts/contrib/list-packageconfig-flags.py", line 28, in <module>
import bb.cache
ImportError: No module named bb.cache
----
The script import bb module from bitbake lib dir, the previous
lib dir was hardcode and only worked on poky but not for others.
In this situation, look for bitbake/bin dir in PATH could fix this issue.
[YOCTO #5060]
(From OE-Core rev: 9e749c430f97b1a30cdf0c13dacd2a985ef7b433)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If runqemu is used without actually building any qemu images (i.e. you
downloaded the images) it's likely that qemu-helper-native hasn't been built.
Instead of just saying what command can't be found, tell the user how to solve
their problem.
(From OE-Core rev: 45f80a0c46035dc73818ce4bd818a4f6197d954f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Default buildhistory directory to buildhistory/ under the current
directory and require an option to set it
* Show a description in the help output
(From OE-Core rev: 64aa7d0b53f6ad45ab1a2121e917d7a512097407)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve command-line argument handling of buildhistory-diff to make it
easier to use.
* Default buildhistory directory to buildhistory/ under the current
directory and require an option to set it (since most users will
likely run buildhistory-diff from the build directory and keep
BUILDHISTORY_DIR at its default location)
* Default from-revision to "build-minus-1" to get the difference from
the previous build with no arguments
* Allow from/to revisions to be specified by from..to (since git accepts
this form).
(From OE-Core rev: 5e2be70e89820ffc74208d225fe4414fe5182050)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* usually it's more important to know how much space will each
package take on target device then size of compressed package
* example for libewebkit0 with 4 different architectures, interesting
that om_gta02 .ipk is bigger but it's smaller when installed
before:
MACHINE DEFAULTTUNE SIZE (.ipk file)
om_gta04 cortexa8t-neon 15996 KiB libewebkit0
qemux86_64 x86-64 16992 KiB libewebkit0
spitz xscale 16148 KiB libewebkit0
om_gta02 arm920t 16260 KiB libewebkit0
after:
MACHINE DEFAULTTUNE SIZE (installed)
om_gta04 cortexa8t-neon 60544 KiB libewebkit0
qemux86_64 x86-64 63720 KiB libewebkit0
spitz xscale 60588 KiB libewebkit0
om_gta02 arm920t 56268 KiB libewebkit0
(From OE-Core rev: 85e4a77138381a6086d5ebd3a28cb5a94bc26a19)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The QEMUOPTIONS for ISOFS was not complete, leading to failures when
trying to start X in live images.
This patch fixes this problem.
[YOCTO #4103]
[YOCTO #4884]
(From OE-Core rev: 08947869917dc5a9dfff05b0ee19279f60cf6d2b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous code used the environment variable BUILDDIR and assumed that TMPDIR
was a subdirectory. This often isn't the case, so instead ask bitbake where the
directories we're about to delete are.
(From OE-Core rev: 29491a72acac81ebb7e9ecfbc9392fbeb9a7ea26)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-setup-builddir substitutes ##COREBASE## which seems like it should have the
same value as the variable ${COREBASE}. In reality it doesn't as ##COREBASE##
is substituted with the value of $OEROOT (the location of the oe-init-build-env
script), whereas ${COREBASE} is set by oe-core to the parent directory of meta/.
If oe-core's meta/ isn't a top-level directory then ##COREBASE## and ${COREBASE}
have different values, which can lead to confusion.
To resolve this, deprecate (but still substitute) ##COREBASE## and substitute
##OEROOT# for $OEROOT.
(From OE-Core rev: 1890783928dd1c73105fae32fb6c588afc287ff6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- This script will list available pkgs which have PACKAGECONFIG flags.
- If option '-f' is used, it will list available PACKAGECONFIG flags
and all affected pkgs.
- If option '-a' is used, it will list all pkgs and PACKAGECONFIG
information
- If option '-p' is used, it means list the pkgs with preferred version
EXAMPLE:
list-packageconfig-flags.py
PACKAGE NAME PACKAGECONFIG FLAGS
==============================================================
alsa-tools-1.0.26.1 defaultval gtk+
avahi-ui-0.6.31 defaultval python
bluez4-4.101 alsa defaultval pie
list-packageconfig-flags.py -f
PACKAGECONFIG FLAG PACKAGE NAMES
====================================
3g connman-1.16
avahi cups-1.6.3 pulseaudio-4.0
beecrypt rpm-5.4.9 rpm-native-5.4.9
list-packageconfig-flags.py -a
==================================================
gtk+-2.24.18
/home/jiahongxu/yocto/poky/meta/recipes-gnome/gtk+/gtk+_2.24.18.bb
PACKAGECONFIG x11
PACKAGECONFIG[x11] --with-x=yes --with-gdktarget=x11,--with-x=no,${X11DEPENDS}
xf86-video-intel-2.21.9
/home/jiahongxu/yocto/poky/meta/recipes-graphics/xorg-driver/xf86-video-intel_2.21.9.bb
PACKAGECONFIG None
PACKAGECONFIG[xvmc] --enable-xvmc,--disable-xvmc,libxvmc
PACKAGECONFIG[sna] --enable-sna,--disable-sna
[YOCTO #4368]
(From OE-Core rev: 8d9e55e1fb073820c959f1797f3ad5a8932b441b)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The middle 'cut' in OECORE_NATIVE_SYSROOT isn't doing anything useful, so
remove it from the pipeline.
(From OE-Core rev: 94495c5a11d31e258a42cabb5ca1487421fe5495)
Signed-off-by: Joe MacDonald <joe.macdonald@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This script is no longer maintained. Now we don't perform LSB test on
qemu image, so we don't need this script. Most of functions in this
script are implemented in LSB_Test.sh. So it is safe to remove.
(From OE-Core rev: 46a71cdd3a6e8f571610d73b8811c060d038e8bf)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apparently $[...] isn't valid in dash, so use $((...)) instead for
mkefidisk.sh and ddimage that both start with $!/bin/sh.
(From OE-Core rev: d509739ca54e6b70f2dcc216b831fc02c64293a6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows the BBLAYERS parsing code to handle cases where BBLAYERS
is spread across multiple assignments or all on a single line, within
double or single quotes.
Fixes [YOCTO #3746].
(From meta-yocto rev: 4ab26d9e655bab0069ffe9b135557d943cf1f524)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add support to boot the 'qemumicroblaze' machine in
qemu-system-microblazeel
* Use the specific machine model for a MicroBlaze system 'petalogix-ml605'
* Use the DTB generated from the kernel build as the DTB for boot
* Force use of initrd rootfs (either in ext or cpio formats)
(From OE-Core rev: 2c164a5dfc877d180ef58d46c063573621297929)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add support to boot the 'qemuzynq' machine in qemu-system-arm
* Use the specific machine model for Zynq 'xilinx-zynq-a9'
* Use the DTB generated from the kernel build as the DTB for boot
* Force use of initrd rootfs (either in ext or cpio formats)
(From OE-Core rev: 1e4b1d95e1f47654e928f38cd091ffe272689844)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handles qemu instances (launch, kill, restart, serial connection, logging)
Launch is blocking until login prompt and returns to the task. A qemu
serial connection is used to save the boot log and get the ip from the image.
Changed runqemu script not to error out when using custom serial option.
(From OE-Core rev: ee7d64dfcc02ba8f568b17d181e0a58d3c810076)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current code uses .startswith to find BBLAYERS, which causes false
positives when other variables such as BBLAYERS_NON_REMOVABLE exist.
This forces an exact match instead of a partial match.
Fixes [YOCTO #4743].
(From meta-yocto rev: c039def50ca6c02cb1b66fd4bf76664de42c068e)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The yocto-layer tool added a new directory alongside the actual
architectures and 'common', which is already screened out as not an
actual architecture when displaying the architecures.
The same needs to be done for 'layer' which isn't actually an
architecuture and likewise needs to be screened out.
Fixes [YOCTO #4735].
(From meta-yocto rev: 7459485bf75855a40d124915d38284f737a25cc4)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As python-multiprocessing requires python-threading and
python-pickle, this commit adds them as runtime dependency.
The observed behavior was:
When typing 'import multiprocessing' in the python shell on a
minimal image with only the python-multiprocessing recipe installed,
python reports at first:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/multiprocessing/__init__.py", line 65, in <module>
from multiprocessing.util import SUBDEBUG, SUBWARNING
File "/usr/lib/python2.7/multiprocessing/util.py", line 38, in <module>
import threading # we want threading to install it's
ImportError: No module named threading
After adding python-threading as runtime dependency and rebuilding
the image, python reports:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/multiprocessing/__init__.py", line 84, in <module>
import _multiprocessing
ImportError: No module named cPickle
(From OE-Core rev: e913412ca0ff01cb654757c8199e8859f15b7cf7)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix typo.
(From OE-Core rev: 07b4682250694c5783aa374814c95ba9a2974a69)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We no longer need to manually bump PR values so lets not generate
code using this.
(From meta-yocto rev: ed23b0eee9791b06b0bae1ad17595e72ccaa86cf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This script is sourced so we should return, not exit.
(From OE-Core rev: bde54b4c4f8de696666a8c79c8cb6cf224c246e1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're finding bugs in python 2.6 and starting to require unittest
functionality in python 2.7.x. Its time to bump the minimum version
requirement. Anyone without python 2.7.x can use the buildtools-tarball
out to install a standalone python/git/tar setup which will work
with the system.
(From OE-Core rev: 8b90f1becd40a7f857d2fbe30eaffe218a976419)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no longer anything of value in the bitbake wrapper script since pseudo
is handled by bitbake internally. We can therefore drop it (yay).
(From OE-Core rev: d716d095751086e72fd789721005f0dc6d632997)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In preparation for removal of the bitbake wrapper script, move the
python version checks to the environment script. There are also
checks within bitbake itself but these may not always function
correctly on every version of python so this is really insurance.
(From OE-Core rev: 07792e4a83ca4f1c8152c228813c7f795fa6a545)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Migrate tests for correct git and tar versions from the wrapper script
to the sanity class.
This sets the scene to allow us to remove the bitbake wrapper script.
(From OE-Core rev: 7b370e23594da5dcb53cd5507ec289c3ef2d9fb5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't pass arguments to bitbake as a single one,
because this will break when the bitbake double-exec
is removed.
(From OE-Core rev: db13f10d233873148156880ab709ec76f8d3c329)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Be more descriptive about the revision we are running on
in the global results file: add branch:commit and git describe fields.
Also add the sizes for tmp dir not only times. (previously these were
only available in the output.log)
(From OE-Core rev: 769a2c8ce797ee3afa39ab0fe9d9206a60cc4ba1)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If runqemu is used without actually building any qemu images (i.e. you
downloaded the images) it's likely that qemu-helper-native hasn't been built.
Instead of just saying what command can't be found, tell the user how to solve
their problem.
(From OE-Core rev: 1498c431a161e8b3ddebefb5f03f4f11d5796c1d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On systems with dash as /bin/sh there were failures while invoking ddimage.
Fix to let it work with both bash and dash shells.
[YOCTO #4617]
(From OE-Core rev: 4c6f7a5d8bd6ada434b91037ecd5db06f3eac814)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Privious check-in "yocto_kernel: check current items before add a
new one" had been merged before I apply the feedback from Zanussi, Tom.
Now fix it as a new patch.
This fix modify the output message when customer adding duplicate
items.
[YOCTO #4558]
(From meta-yocto rev: 530c6efa85b1798d30db4c6c83a748b100b8c1c3)
Signed-off-by: Ning Zhang <ning.zhang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When use "yocto-kernel config add" to add the same config many times,
all of these are list when use "yocto-kernel config list" to check.
This fix modify routine yocto_kernel_config_add, if the new added
components already exist in current configuration, just igore them.
Now, one config could only be added one time.
[YOCTO #4558]
(From meta-yocto rev: 655ccc5ed77b52fb62dab5f6cfdf3de39b1bf055)
Signed-off-by: Ning Zhang <ning.zhang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
stty manual says :
"sane - Resets all modes to reasonable values for interactive terminal use."
But reasonable isn't the most viable solution, because we want to keep the
original stty settings before running runqemu. Saving the stty settings and
setting them at the end of the runqemu script solves the terminal
settings differences after the script ran.
[Yocto #4512]
(From OE-Core rev: 93e0ae68d2c1827370f4f9e95c2f0b7f98ba2cb8)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
[Added filename info in commit subject - sgw]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was added quite a long time ago because of poor interactions
between HAL and the X server when it came to enabling input devices.
HAL is long gone and I think it's safe to say we don't need to disable
this any longer, especially as it gets in the way of being able to plug
in the keyboard/mouse after boot.
(From meta-yocto rev: e06ab1e030e8cfbc259500b1a0b958fe752fb872)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After switching from ifconfig to ip, networking stopped working. This
commit contains the following fixes:
* set a decent broadcast address for the tap device;
* bring up the device;
* add the route using ip tool instead of the old route tool;
(From OE-Core rev: a286514e2311f52b54d3571dbac6d34aff39e591)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu script now takes argument "slirp" in order to
run networking on the qemu machine, without root privileges.
changed the runqemu-internal script in order not to activate
the tap devices if the option is set.
[YOCTO #1474]
(From OE-Core rev: fa7fd7b1cbcfbd01af1949d2ea09b880a0ae0175)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the user sees ugly errors if git isn't installed, this patch
cleans up the code to correctly handle that case.
(From OE-Core rev: aeb704fee8b4ffeaeddcdb36ae4e1d62c264ce42)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
/tmp is a better location, and it allows copying files
on read only fs images
(From OE-Core rev: e3561c1cae467a4fb79723f83dea54d9d62adf7d)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes we need to change the timeout used by the function for
certain kinds of tests.
(From OE-Core rev: 21950ff5eb032fefc4753bd68af57f655d0c61f2)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some tests might want to pass extra arguments to runqemu.
I can think of "kvm" or qemuparams="-m 1024" when we want extra muscle.
(From OE-Core rev: 1a5446ca73736753d172c06dcb48858887c7a896)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ifconfig and its ilk (net-tools package) is deprecated in favour of iproute2 package
and is now removed by many distro's e.g. Archlinux. So we replace ifconfig with ip utility
(From OE-Core rev: c19e5d19ae8e6e6eb9b37549d80765b8315f79a4)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow "hob" to receive other arguments in the command line (for example
the server type and the address of the remote end if running remotely).
(From OE-Core rev: 1bd6fa9c81dea90f66641835a4c2ed6f2b7a239a)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemuimage-testlib hardcodes ext3 as fs type. This adds support for more
images types which are supported by runqemu: ext[234]/jffs2/btrfs.
I've skipped (for now) vmdk (which qemu can boot) because:
- we don't have network on images without connman because of the way
runqemu starts vmdk images (can't pass kernel args for network config)
- qemuimage-testlib-pythonhelper relies on '192.168' being in the output of
ps to return the pid
(From OE-Core rev: 95b7cafafcaa4dda7328632475003f5778ab95bd)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't check only for ext3 fstype, we can boot ext2 and ext4 just
as well.
(From OE-Core rev: 8fbf21365fbfab9e3cd36c4eab86fe03efa04e8e)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Check for existence of specified buildhistory directory and show a
proper error message if it doesn't
* Show an error message instead of a traceback with a mangled revision
if one of the specified git revisions is invalid
* Show usage information if --help is specified
* Write error messages to stderr
Fixes [YOCTO #4313].
(From OE-Core rev: 329edb52e9c23c0956b849a660accf39d44f9d9f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some automounters are rather overzealous and like to mount things
immediately after partitioning. This can happen if the disk is being
reused and the partitions align exactly with the existing partitions
which have already been formatted. Move the unmount code into a function
and call it before and after partitioning.
(From OE-Core rev: f1854e458e5e77806b1fc837033500fa91272261)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using multilib, the hooks for lib32/lib64 must be different because
the libdir/base_libdir point to different locations. Postinstalls
calling postint_intercept script must pass the mlprefix in the 3rd
argument.
(From OE-Core rev: 2c5c6e3ffcd561c25a34603922b622449f677a34)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When all builds have finished write the hostname, commit and times
on a single line in the global results file (useful for merging later
on files from multiple systems).
Also the final cleaning should be last after writing the results.
(From OE-Core rev: 582798f70bf350d2db6911eb8df333ada05f6484)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When your proxy/network connection is unstable the network sanity test
which runs before every build (because we wipe all the files in the build dir)
can influence build time. Appending CONNECTIVITY_CHECK_URIS = ""
in local.conf will disable the check.
(From OE-Core rev: cc1ed3c1940e4f64534b58de1b5fc6ef90362c9a)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some functions didn't used the same identation as the rest of them,
let's fix that.
(From OE-Core rev: a7af4541060f62b4019a100d57e0d082794f708b)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Old versions of ldd (2.11) as run on some of the autobuilders end up running
commands like "LD_xxxx qemu-system-xxx" which this process detection code
would pick up and result in the wrong PID for qemu.
This changes the code to check for "192.168" in the command so we know
we're getting the correct one. This is less than ideal however we're
running out of options and resolves false negatives we see on the
autobuilder.
(From OE-Core rev: 7b43151bb073f1f6f1fa5a31447b742127060909)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With automounters abounding it makes more sense to attempt to unmount
the device rather than abort, just like ddimage does.
(From OE-Core rev: f522ff19ba4b80788d66a2c58ee50b86fdfea15f)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The distcc support is clearly unused and broken, might as well drop the
remaining code fragements.
(From OE-Core rev: 1a70a3225947aa45f3e1f377d50a5865aac64d2b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have recipes-* directories not a recipes directory; this is left over
from the old old layout (2010).
(From meta-yocto rev: 8adbbb4b688e60113f68d3974310774686551eff)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch is the same as 6c22c59137,
but for x86-64 targets which exhibit the same problem.
Qemu update from 1.2 to 1.4 now allows for 16bit depth in guests,
whereby previously only 32bit depth was supported. However,
the new support is broken, so we force 32bit depth in all cases.
(From OE-Core rev: 6719400533453d0df482ef6e7bb347491e8a3e2b)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Postinstalls that use qemu are throwing a segmentation fault when
building for qemux86-64 on a 64bit host (it might also happen for
qemux86 if building on a 32bit host but I didn't test). It looks like
qemu looks for ld.so.cache which is not found because it is generated
after rootfs_(rpm|ipk|deb)_do_rootfs is called and then it tries to load
libraries from the default paths (which are the host's). In order to
avoid this, pass the LD_LIBRARY_PATH explicitly to the target's dynamic
loader.
(From OE-Core rev: 48e8b613b3f5c7b1d917bf3147606d44072ce49e)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dmesg test detects segfaults. This is useful information to have and if one
occurs in one of the earlier tests, this can aid debugging. Move the dmesg test to
the end of the list of tests so we gain the extra debug info in those cases.
(From OE-Core rev: 472dc52974f12c255d9e98e63e82736c7ca2c223)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First strip $PATH of any existence of the paths needed by Open Embedded
and BitBake. Then add the needed paths at the beginning. This makes sure
the needed paths are searched first, without growing $PATH unnecessarily
if oe-init-build-env is rerun for a directory for which it has
previously been run.
(From OE-Core rev: 7429db6f38e405774ba66b3fa1bc3ac4b74ae6b9)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If $PATH already has the needed paths at the beginning, there is no need
to add them again. This allows rerunning oe-init-build-env for the same
directory without having $PATH increase unnecessarily every time.
(From OE-Core rev: 161abcd3672f83990ede03d67b7388678c07150e)
Signed-off-by: Peter Kjellerstedt <pkj@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check after getting the original package name (e.g. undoing Debian
renaming) if there is a complementary package for that name, e.g. if
the glob is *-dev, then libudev0 -> libudev -> libudev-dev.
Fixes [YOCTO #4136].
(From OE-Core rev: 84a1c6922934a99e8afee0185e58dc4789b54a22)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As we've increased the parallelisation on the build servers, we've started to see
core-image-minimal sanity test boot failures where the network never comes up. We
don't see those failures for core-image-sato, its always minimal.
Looking at the results, it can take ~100 seconds for the network to come up,
even on the sato images if the machine has a high load. The timeout for the boot
test is only 120 seconds compared to 400 on every other test.
This change makes the timeout equal for all the tests at 400 seconds in the hope
that the load on the autobuilder is causing the sanity tests to run slowly and
hence triggering the false negatives.
(From OE-Core rev: 331118a253e26821011a31ca9087611ea58a18b8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default branch for the qemu-based mips BSP template no longer
exists, so change to one that does.
(From meta-yocto rev: 5af614322269ee7c79928d1ff343f2e3bcf35509)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
arm-based qemu machines won't boot with the default 3.8 machine SRCREV
because it's missing the commit 'arm: add dummy swizzle for versatile
with qemu', so we need to use a SRCREV that has it merged.
(From meta-yocto rev: 176ec06589032b0b589da8345adfc87dddcb74f0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few small changes to the machine.conf from the previous version that
should be incorporated.
(From meta-yocto rev: 05a86a2e8d69b32243ab1915b279411d3d82235f)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the qemu-based BSPs, use bsp metadata that's guaranteed to boot in
qemu.
(From meta-yocto rev: e274a2e66c26489a4da895194eb6e7a9c1476a73)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pass the file object instead of the filename to replace_file for the
custom template, as now required by replace_file().
(From meta-yocto rev: 56091c019000cfe3d22ec464c596d97ae78fc619)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
replace_file needs to make sure the file it's replacing is closed
before replacing it, otherwise unexpected results may ensue.
Fixes [YOCTO #4145].
(From meta-yocto rev: 1339dbb690d51456b4474356992e430638469e47)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
RT support is now available in the linux-yocto-3.8 kernel, so we can
also add that as kernel option for users.
(From meta-yocto rev: 2e425b5c6c7e685e8a0e0c8cb2cf64040e454cad)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the cases where a BSP reuses an existing branch, we still need the
KBRANCH in order to be able to specify an existing branch.
(From meta-yocto rev: 5a3167c4fa6cb53ec501e9de185b93748973ec18)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new function to scp from the target, and another to fetch
/var/log/messages and dump it to the console.
(From OE-Core rev: f94cb0d175309ad6b29598c57ba74cf1c3646661)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set StrictHostKeyChecking to no to silence the fingerprint warnings, and instead
of creating a temporary file for the known hosts and then deleting it just use
/dev/null.
(From OE-Core rev: 24e4a570eb527cff017386976296d5747c1adf57)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We know the grep failed because the error case is being executed, so don't do
the grep again when attempting to help diagnose the problem, as seeing the full
process list might be useful.
(From OE-Core rev: 6ee4a2ba6ee9633c1fa08d3b162d6d00da307798)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The intercept scripts fail to run on 32 bit hosts. Apparently, the
current approach worked on 64 bit hosts due to the larger virtual address
space (probably). On 32 bit hosts, however, calling the target binary like:
qemu-arm ld-linux.so --library-path /lib:/usr/lib arm_binary
fails with:
arm_binary: error while loading shared libraries: arm_binary: failed to
map segment from shared object: Operation not permitted
When run like this, qemu-arm fails to map the arm_binary executable in
memory because it's hitting the lower limit of
/proc/sys/vm/mmap_min_addr. That's because it loads the
ld-linux.so binary successfully, taking into account mmap_min_addr, runs
it, and then ld-linux.so will map the arm_binary at a fixed address but this
will fail because it is below mmap_min_addr. The qemu's guest base probing,
apparently, doesn't work fine when a program runs inside other.
One way around this would be to set mmap_min_addr to 0 (on recent
distributions is set to 65536 to avoid "kernel NULL pointer dereference"
defects) but this approach is not safe.
The other way is to call the binary directly but providing qemu with a
prefix (-L option) in order to find the elf interpreter correctly. This
way, both the target binary and dynamic loader are mapped into memory
under qemu's control and, only after, the dynamic loader is started.
[YOCTO #4179]
(From OE-Core rev: 78f91e08c8a7b0f0c831a087f7c89e2c76047e7a)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu-internal runs "ldd qemu-system xxx" and the detection code was returning this
as the PID of qemu. This patch improves the detection code to avoid this problem,
fixing certain race type failures on the autobuilder.
(From OE-Core rev: fc914a6fb3204f8b5bdfc0f56364606673d5356a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* usefull for jenkins jobs, which will otherwise fail
because 1 was returned
(From OE-Core rev: a864de0f2a326f857125229fc986845044931196)
Signed-off-by: Henning Heinold <heinold@inf.fu-berlin.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When trying to import python-pprint on a minimal image, it reports that
the cStringIO python module is missing.
This is provided with python-io, so we add python-io as runtime
dependency.
The complete observed trace was:
Python 2.7.3 (default, Apr 4 2013, 07:45:36)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import pprint
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/pprint.py", line 40, in <module>
from cStringIO import StringIO as _StringIO
ImportError: No module named cStringIO
(From OE-Core rev: abe7bf9992e298f1b53e790eee7b064a9e4e8589)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Qemu update from 1.2 to 1.4 now allows for 16bit depth in guests,
whereby previously only 32bit depth was supported. However,
the new support is broken, so we force 32bit depth in all cases.
MUST_REVERT: on qemu update, if 16bit depth support is working ok
Fixes [YOCTO #3828]
(From OE-Core rev: 354377789628d96fa589cb5721134f631815cfeb)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We are seeing timeouts on the autobuilder where qemu does start but the script
doesn't appear to be able to detect it in time. This patch increases the
timeouts since there seems little harm in doing so.
(From OE-Core rev: 53071c6b569067f98c558ee667bb1a4be0d8f6db)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add another test to time bitbake -p with and without cache/ or tmp/cache.
(From OE-Core rev: 3ed59ee53ee7d87694670a7ba864165146b90a6b)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds a -p option to allow cherry-picking of fix revisions.
Removes the final build/sstate directories to stop running out of space.
Runs subsequent tasks even if one test fails.
(From OE-Core rev: 16ea0d406a31e08071ce7d475221f0b158165405)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Append results from each run to a single file in order to keep a history.
Also do some cosmetic changes and fix some whitespace.
(From OE-Core rev: 9b99b4e9284071501859df5631e9019b3000ffe9)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This script runs a series of builds (core-image-sato by default) with
and without sstate cache and collects some metrics (time and size currently).
It takes a commit as argument (-c <rev>) and measures wall clock for
bitbake core-image-sato and virtual/kernel.
(From OE-Core rev: ee9538081a0bccfb7eb2888b1b51fe9b71c8cb81)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Possibility to customize the text that is presented to the user when
they execute the script.
(From OE-Core rev: 6ad06582621fc20d09d4d7fd78ea7e175367c187)
Signed-off-by: Anders Roxell <anders.roxell@enea.com>
Tested-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Collect SRCREV information in a separate task and write it out in a
format which is more consistent with the rest of the buildhistory
output. Using a task means that SRCREV values will also be recorded for
native recipes and not just target ones, and the new formatting also
correctly handles multiple entries in SRC_URI.
Also adds scripts/buildhistory-collect-srcrevs which will report on all
of the recorded SRCREV values in a format suitable for use in global
configuration (e.g. local.conf or a distro inc file) to override AUTOREV
values to a fixed set of revisions. Example output:
# emenlow-poky-linux
SRCREV_machine_pn-linux-yocto = "b5c37fe6e24eec194bb29d22fdd55d73bcc709bf"
SRCREV_emgd_pn-linux-yocto = "caea08c988e0f41103bbe18eafca20348f95da02"
SRCREV_meta_pn-linux-yocto = "c2ed0f16fdec628242a682897d5d86df4547cf24"
# core2-poky-linux
SRCREV_pn-kmod = "62081c0f68905b22f375156d4532fd37fa5c8d33"
SRCREV_pn-blktrace = "d6918c8832793b4205ed3bfede78c2f915c23385"
SRCREV_pn-opkg = "649"
Some notes on using this script:
* By default only values where the SRCREV was not hardcoded (usually
i.e. AUTOREV was used) are reported - use the -a option to see all
SRCREV values.
* The output statements may not have any effect in the face of overrides
applied elsewhere; use the -f option to add the forcevariable override
to each output line to work around this.
* The script does not do any special handling for multiple machines;
however it does place a comment before each set of values specifying
which triplet they belong to as shown above.
Relates to [YOCTO #3041].
(From OE-Core rev: 2179db89436d719635f858c87d1e098696bead2a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows error messages to be captured in the logs which is helpful.
(From OE-Core rev: 09a5fec50d622d338db5bd5516d29e4f4d0cec0d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If runqemu (or qemu itself) fails we need to know why, so tee out to a
log file and print it when we can't find the qemu process or determine
its IP address.
(From OE-Core rev: 827106a57ca88760a19f9309d859b500c5c4fe97)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The helper script was printing an error to stdout when it couldn't find
any qemu child processes; output this error to stderr instead and
redirect stderr to /dev/null when running from qemuimage-testlib so that
QEMUPID is actually blank if there are no qemu instances found.
(From OE-Core rev: 7c2137a07cca8e1d40d3c8b4b2c6321d80f2b1de)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mesa-dri has been renamed to mesa.
[YOCTO #3385]
(From meta-yocto rev: ba8d5b6dcb6fa4721e85b62f15713072cc0fa23f)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While GPT works fine when writing to actual media, it cannot be reliably
used for distributing disk images as it requires the backup table to be
on the last block on the device, which of course varies from device to
device. Use MSDOS tables instead.
Use mkfs to label the filesystems as msdos tables do not support
partition labeling.
(From OE-Core rev: 049ea1e0a6a1017a5020de38bd7ce93515bd62f4)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most firmware implementations use the EFI specified
EFI/BOOT/bootia32.efi (and similar) boot paths. Only broken firmware
uses different paths for removable media. In those cases, the user can
add their own startup.nsh.
For the compliant case, selecting "Shell" from the EFI boot menu should
go to the shell.
(From OE-Core rev: d031cdbf40231b8c103d78c69252bf9d584d0605)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without a reliable way of knowing if the target device with be an
asyncronous block device on the target (MMC or USB), err on the side of
caution of always specifcy "rootwait", ensuring the kernel will wait for
the device to appear and not abort if it hasn't appeared in time for
mount.
Document the remaining kernel parameters added by this script on the
same line as rootwait.
(From OE-Core rev: 5b6a6a3872fd341cf978be40c69707223e3c29df)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need to boot with "rw". Booting with "ro" will allow for
fsck to be run during boot, and a proper /etc/fstab will still ensure
the rootfs is "rw" by the time the user can interact with the system.
Change the "rw" to "ro" in the kernel parameters specified in the
generated grub.cfg file.
Fixes [YOCTO 4036] mkefidisk.sh hardcodes 'rw' as root mount option
(From OE-Core rev: 960f0cbf85a4124adbc74d8b2ceb09a7d39ecc04)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current script only replaces an existing root= kernel parameter
which can result images created without a root= paremeter, even though
the script expects a target rootfs parameter.
Rather than replacing the root= parameter, delete the root= parameter if
it exists, then append an appropriate root= parameter.
Fixes [YOCTO 4035] mkefidisk.sh forgets to add root= parameter
(From OE-Core rev: e5dbec7e7d3bb29676280823b0337ad429c75120)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This extra information should allow better forensics if the sanity tests
fail as they're currently doing occasionaly on the autobuilder for unknown
reasons.
The patch also tightens up certain checks to remove pointless noise and
error output from the logs.
(From OE-Core rev: f9970aa0a44aca8ffe6c7a6a3261887fb0db38d2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are two problems here. Firstly the grep command is unanchored so
pid 345 will match against 12345 and so on.
The second issue is that there are several context switched between attempting
the lock and then writing the pid to it.
Between the two issues, there were issues appearing on the autobuilder due
to these conflicts. This patch replaces the mechanism with flock on fd 8
which should be a safer mechanism to use.
(From OE-Core rev: 98471be6e58451016200cfd10e64e8ae6266c801)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu-internal is sourced so should be returning with an error code in
case of errors. runqemu needs to deal with this.
This patch fixes up the various error paths so we're consistent and get
a sane exit status for runqemu which helps a lot in its use in the qemu
runtime testing on the autobuilder.
(From OE-Core rev: 753533b2f338ff2ef97eebd5eace7623404ae457)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check for a zero IP address since its clearly incorrect if that value
is found. Also add debugging for cases where we can't find the qemu
process. A process listing is handy to help understand what the problem
might be.
(From OE-Core rev: 817a8dc6424050973d8fad4f003475ac83ea6bb5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Qemu changes pid when starting up. On a loaded machine, this can result
in the incorrect pid being returned. Since qemu will take a few seconds to
boot anyway, we might as well delay a short while and allow things to settle
which should fix various race issues being seen on the autobuilder.
(From OE-Core rev: c0cecc16d4305b16ecfb4a51f6d5020d34909794)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove some pointless code and also fix the return handling
for the function since it returns null, not 0 as the comments
would suggest.
(From OE-Core rev: 6b8d7767ff14345af29d7774b7e16e29c3f7fa8e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In single testing with a shutdown scenario the processes are cleaned up correctly
but the manual cleanup fall back used for a minimal image do not work properly.
This patch fixes the kill commands to revert to non-process groups, fixing
the hung process issues that were occuring.
(From OE-Core rev: 6a0134fd4f1b64ef788be0791bd655dc7703d505)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake handles immediate expansions of LAYERDIR for us automatically.
(From meta-yocto rev: ee59f1ec94ba8474876603dad1ab32d131227f49)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current code has a race since it greps for *any* qemu process
running, even if it isn't the one we started. This leads to some sanity
tests potentially failing on machines where multiple sets of sanity tests
are running.
To resovle this and some other ugly code issues, add a python script
to accurately walk the process tree and find the qemu process. We can
then replace all the shell functions attempting this which happen to
work in many cases but not all.
Also clean up some of the error handling so its more legible.
(From OE-Core rev: b9e052ed6b604f0049bcfa968a57f15d6e3d6395)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The script was creating a FAT fs with EFI files in it, but wasn't setting the GPT GUID.
Using 'gummiboot install' natively failed because of the missing GPT GUID, so fix that. While we're there also set the name to "EFI System Partition".
(From OE-Core rev: 203ca80ee27948e2c68aab8ea48e51ff1c1157d5)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the user-features.scc files needed by the new kernel feature
support in yocto-kernel.
(From meta-yocto rev: 0ef493fbbe412b6e30fc60b892ba6c2e5664307f)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a yocto-kernel command allowing users to destroy a recipe-space
kernel feature local to a particular BSP. The removed feature is
subsequently no longer available for the normal feature addition and
removal yocto-kernel commands.
(From meta-yocto rev: faa18f56d9412694f2c8e0b0c09e751cb7f3a743)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a yocto-kernel command allowing users to create a recipe-space
kernel feature local to a particular BSP. The new feature is
subsequently available for the normal feature addition and removal
yocto-kernel commands used with features defined in the meta branch of
linux-yocto kernel repos.
(From meta-yocto rev: 13abcd93b9e1591bc45ff5f9eb17b8feb9ac9ae5)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a yocto-kernel command allowing users to print the description and
compatibility of a given kernel feature.
(From meta-yocto rev: 73b4f1a8d156af6810cdde3af672d6286a7071e7)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a yocto-kernel command allowing users to list all the kernel
features available to a BSP. This includes the features contained in
linux-yocto meta branches as well as recipe-space features defined
locally to the BSP.
(From meta-yocto rev: 12f3af8d92456ad9212170decdbe102fc78b58f6)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add yocto-kernel commands allowing users to add, remove, and list
kernel features with respect to a given BSP.
Features managed by these commands modify a special
machine-user-features.scc file associated with the kernel recipe
(.bbappend) of a yocto-bsp-generated BSP. This is analagous to the
implementation of similar support for bare config items and patches
already implemented for yocto-bsp-generated BSPs.
Future patches will add support for providing a list of eligible
features as defined by linux-yocto kernels and locally-defined
(recipe-space) kernel features.
(From meta-yocto rev: ae68d906c5c9854f2cd7ee0870556fbfbd7d94d0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Along with related changes.
(From meta-yocto rev: 6e93c881e2323b57f5b102db3b2b54220a06a1b6)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simplify by removing unnecessary KMACHINE/KBRANCH and SRC_URI items.
Also simplify machine-preempt-rt.scc
(From meta-yocto rev: b9973f7761b86e3d4571fe5582759e5405e1d7b4)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simplify machine-standard.scc for all the templates.
(From meta-yocto rev: ad0d944698a854a281d0beea1c87a0600e98ccbd)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simplify by removing unnecessary KMACHINE/KBRANCH and SRC_URI items.
(From meta-yocto rev: d1224846e5ff6c101bf50011d5d3314cbbd81f61)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simplify machine-standard.scc for all the templates.
(From meta-yocto rev: ac8ec04c50bc8dbf716ff5746c8942566fd5c2bf)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update map_standard_kbranch() with preempt-rt and tiny variants.
(From meta-yocto rev: 48233b051b0599ee745d0b8d24863a08e7440d6a)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use map_standard_branch() instead of naming the branch directly.
(From meta-yocto rev: 34ec7d4cf53f82adb8de61969d0981344f9a1d87)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update map_standard_kbranch() to be consistent with the new changes in
meta naming and remove obsolete standard/default mapping.
(From meta-yocto rev: 40998ba44e1a4ebb1c165cab1a250025041e0da0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the default custom kernel to 3.8.y, the current stable kernel
available at this point.
(From meta-yocto rev: f10f30bf77ee0571c1b5edc083833c5267d013d6)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For Yocto 1.4, 3.8 is the preferred kernel and 3.2 is obsolete.
(From meta-yocto rev: 5b07921319901a3709492c43397c57bbd2201585)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The script greps for 'Disk', which doesn't work when your crazy Dutch distro has parted call it 'Schijf', so force LANG=C.
The second problem is that 'Disk' might be a substring in the Model entry:
[root@Angstrom-F16-vm-rpm contrib] # parted /dev/sdc unit mb print
Model: SanDisk SDDR-113 (scsi)
Disk /dev/sdc: 3905MB
(From OE-Core rev: 2e404930f6fc7d818d2f429793e84bce77163afd)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Contents:
- Summary
- Usage
- Implementation summary
- Output
- TODO
* Summary:
This is used for printing what is about to happen between the current and last
builds, for example:
$ bitbake core-image-sato
# Edit some recipes
$ bitbake-whatchanged core-image-sato
The changes will be printed.
* Usage:
bitbake-whatchanged [[opts] recipe]
* Implementation summary:
- Use the "STAMPS_DIR=<path> bitbake -S recipe" to generate the new
stamps, compare these stamps to the one in the old stamps dir (tmp/stamps),
so we will get what are changed.
- When the "-v" (verbose) is not specified:
> Figure out the newly added tasks
> Figure out the PV (including PE) and PR changed tasks
> The left tasks are the ones that the "Dependencies" changed tasks
- When "-v" is specified:
> Figure out the newly added tasks
> Use bb.siggen.compare_sigfiles to figure out the details
* Output, for example (core-image-sato with different git tags)
and with recipes upgraded):
- without "-v":
Figuring out the STAMPS_DIR ...
Generating the new stamps ... (need several minutes)
=== Newly added tasks: (5 tasks)
core-image-sato: do_configure do_populate_lic do_install do_rootfs do_compile
# Note: This is because the "bitbake -S" always generate the sigdata for
# do_compile, do_rootfs and other task, we may need fix this from "bitbake -S"
=== PV changed: (130 tasks)
alsa-utils: 1.0.25 -> 1.0.26
cross-localedef-native: 2.16 -> 2.17
eglibc-initial: 2.16 -> 2.17
[snip]
=== Dependencies changed: (3593 tasks)
busybox: do_package do_package_write do_build do_packagedata do_populate_sysroot do_install do_compile do_package_write_rpm do_configure do_populate_lic
atk-native: do_compile do_package_write_rpm do_package do_configure do_populate_sysroot do_install do_populate_lic do_patch do_packagedata do_build do_package_write do_unpack
[snip]
=== Summary: (3728 changed, 1134 unchanged)
Newly added: 5
PV changed: 130
PR changed: 0
Dependencies changed: 3593
Removing the newly generated stamps dir ...
- with "-v":
=== Newly added tasks: (5 tasks)
core-image-sato: do_configure do_populate_lic do_install do_rootfs do_compile
=== The verbose changes of glib-2.0-native.do_do_install:
Hash for dependent task virtual:native:glib-2.0_2.34.3.bb.do_compile changed from bab8b8dd95be1b83dcec93f755b1812b to 70f746df7809acaa52de204b0685abb4
[snip]
=== Summary: (3728 changed, 1134 unchanged)
Newly added: 5
Dependencies changed: 3723
Removing the newly generated stamps dir ...
* TODO
- It seems that the "bitbake -S core-image-sato" has bugs, it would always
report errors, but doesn't fatal errors
- The gcc-cross' stamps are in tmp/stamps/work-shared, but the
"bitbake -S" doesn't put the stamps in work-shared.
- The "bitbake -S" always generates the sigdata for image recipe's do_compile,
do_install and other tasks, we may need fix this from "bitbake -S".
- Print the ones which can be installed from the sstate.
[YOCTO #1659]
(From OE-Core rev: 8783fcc23ccbd829ecb0dc59cf71ee44376094cc)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add STAMPS_DIR for constructing STAMP, the defination of STAMP is:
STAMP = "${TMPDIR}/stamps/${MULTIMACH_TARGET_SYS}/${PN}/${EXTENDPE}${PV}-${PR}"
We can only change the TMPDIR if we want to change the STAMP's location,
but the bb_cache.dat would be regenerated if TMPDIR changes, so add
STAMPS_DIR for constructing it, and add it to the BB_ENV_EXTRAWHITE,
this is very usefull for the "bitbake -S", since then it can be run by:
STAMPS_DIR=<path> bitbake -S <recipe>
which will avoid putting the stamps to ${TMPDIR}/stamps.
BTW, break the too long BB_ENV_EXTRAWHITE into several lines.
[YOCTO #1659]
(From OE-Core rev: ce732c04b3ac06633e20efa8799c4189abfd41b3)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With 3.8 kernels we get a harmless error message during kernel boot.
For now we can ignore. This allows the tests to pass and ensures we
can merge the 3.8 kernel.
(From OE-Core rev: da1e094c407353af2ab230c4867c9d8fd68e3161)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The description of option `-d' is not correct in useage. It is used to
remove duplicate and debug at the same time. Use option `-D' to control
debug info output and the option `-d' to flag remove duplicate.
[YOCTO #3635]
(From OE-Core rev: fa0b40c233e757fe986aa45798b35b60b89c879f)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The implementation of `--remove-duplicated' has been modified by the commit:
http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?id=0740f82aea92da0195524e37c372f9981e7f5e6d
In above commit, sstate cache files with multiple archs are not considered
duplicate and don't need to be removed as duplicated any more.
Update the description of `--remove-duplicated' in usage to keep consistent
with implementation.
[YOCTO #3635]
(From OE-Core rev: c201fdc2f01f398060cd953a1640a685797d9e64)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Currently the assumption is made that only oe-core can include a scripts
directory.
* However, when other layers create a scripts directory the bitbake script
freaks out causing a infinite recursive loop until it crashes.
* Simply changing the regular expression to remove all instances of scripts path
instead of just the first one fixes this problem.
[Yocto Bug 3872]
(From OE-Core rev: 9b445cc39604223b0cfb21d28f748a86ff4cdf68)
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modify the include file and script to generate a missing RDEPENDS.
Install python on target with python-io. Import ssl:
Python 2.7.3 (default, Feb 9 2013, 16:04:35)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import ssl
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/ssl.py", line 58, in <module>
ImportError: No module named textwrap
Installing python-textutils solves the issue.
(From OE-Core rev: 900ae881c3483eea36aa0be456b93f92980f4924)
Signed-off-by: MiLo <milo-software@users.sourceforge.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Forcing ps to display unlimited column width allows the qemu IP address to
be discovered during sanity testing when the command line is extremely long.
This seems to fix the sanity testing problem on AB05 which was recently updated
to OpenSUSE 12.2. I'm not sure what about qemu or process listing is different
on that distribution but this simpile fix seems to work and my help on other
distro's as well.
(From OE-Core rev: 4cea35cc4e4ed8e68cd117825b1dd4ef1be768c2)
Signed-off-by: Michael Halstead <michael@yoctoproject.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The scripts/postinst-intercepts will contain all postinstall hooks that
we need to run after all packages have been installed.
If one wants to install such a postinst hook, all it needs to do is put
the hook in this directory and, from the package postinstall scriptlet,
call:
postinst_intercept <hook_name> <package_name> <var1=...> ...
This will, practically, add the package_name in the list of packages
that need the hook to run and, also, set any variables that would be
needed in the hook. For example, variables like ${libdir}, ${bindir},
etc. that might depend on distribution can be passed on to the script in
this way.
(From OE-Core rev: 0ef538d75c2f3921a2fcbe6ca1deed5525b276cc)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid the chicken / egg problem of an SDK that provides a working
python but requires that version of python to extract itself. The
RHEL 5.x systems and some other enterprise Linux systems ship with
python 2.4.x as the default python. We need to at least be able to
extract work executables even if we never use the the host provided
python again.
(From OE-Core rev: e1d42db8749b0b965ddc6cfba4f3b93ee96ed4f4)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are two cases of corruption that the relocate_sdk.py was not correctly
dealing with.
1) SDK Extras should be left alone
Extra external binaries included in an SDK that were linked against the
host's version of /usr/lib/ld-so.so should not get a relocation applied.
In the case that was discovered these were LSB compliant binaries that
already worked on many hosts.
2) If the interp section is too small generate an error
In the case of the qemu user code, it was using its own .ld file
to link the executables which overrides the default in the nativesdk
binutils. This generated host executables which had a interp section
that was too small to relocate.
Now the relocate_sdk.py will print an error and continue on such that
the error can be fixed by a developer without having to do the
difficult task of debugging why it is crashing or not loading correctly.
(From OE-Core rev: 3752a9c6d772b39bbe04d62ef4d3527b4c7198c1)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new oe-git-proxy should address all git proxying needs, remove
the previous scripts.
V2: Separate the removal of the old scripts into their own patch
(From OE-Core rev: 75738ac47b9ca11daa94820c9c5f829937397da7)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BSD nc was commonly available on the current distros until Fedora 18
appears to have dropped it. socat appears to be a reasonable replacement
with availability on Fedora and Ubuntu and going back some time as well.
Update the script to use the socat syntax.
Simplify the logic a bit by using exec for the no-proxy-needed cases.
(From OE-Core rev: 795b1ea370b8a1d9152c171a50e80bd0b4b8dc60)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-git-proxy.sh is a simple tool to be used via GIT_PROXY_COMMAND. It
uses BSD netcat to make SOCKS5 or HTTPS proxy connections. It uses
ALL_PROXY to determine the proxy server, protocol, and port. It uses
NO_PROXY to skip using the proxy for a comma delimited list of hosts,
host globs (*.example.com), IPs, or CIDR masks (192.168.1.0/24). It is
known to work with both bash and dash shells.
V2: Implement recommendations by Enrico Scholz:
o Use exec for the nc calls
o Use "$@" instead of $* to avoid quoting issues inherent with $*
o Use bash explicitly and simplify some of the string manipulations
Also:
o Drop the .sh in the name per Otavio Salvador
o Remove a stray debug statement
V3: Implement recommendations by Otavio Salvador
o GPL license blurb
o Fix minor typo in comment block
(From OE-Core rev: 62867f56da0e0904f0108f113324c2432659fbac)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Cc: Otavio Salvador <otavio@ossystems.com.br>
git-proxy cleanup
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applications are inconsistent in their use of upper and lower case proxy
variables. Curl, for example, specifies NO_PROXY (not no_proxy) in the
man page (changed in 2009 [1]). Avoid proxy issues by ensuring both the
upper and lower case versions of each proxy variable are available in
the environment for the fetcher commands.
Add FTPS_PROXY and ftps_proxy to the list as well.
1. http://curl.haxx.se/mail/tracker-2009-04/0012.html
(From OE-Core rev: 684c6512850ceb108e52af634be98eaacb8351e1)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following variables perform no function outside of bitbake:
GIT_CONFIG
GIT_PROXY_HOST
GIT_PROXY_PORT
GIT_PROXY_IGNORE
GIT_CONFIG only affects the git-config command which is not relevant to
the fetcher. This was previously used with the OE GIT_CORE_CONFIG
variable which would provide a basic git config to use instead of the
user's config. This usage was deprecated by git for over a year now:
http://git.661346.n2.nabble.com/Overriding-gitconfig-using-GIT-CONFIG-td6680977
GIT_PROXY_HOST and GIT_PROXY_PORT are not used by git.
GIT_PROXY_IGNORE was an OE construct used to create the custom git
config and had no meaning outside of the OE environment. It is not used
by git.
Remove these variables from the fetcher environment.
Users wishing to configure git to work with a proxy should define the
GIT_PROXY_COMMAND environment variable to use an external script.
NO_PROXY can be used within this script to skip the proxy for certain
hosts.
(From OE-Core rev: ea0284a8cc1b531e115b7fdbfa18852f55573f00)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the qemu is running on a headless machine, a VNC server that only allows
connections from localhost isn't too useful.
Add a "vncpublic" option to bind a VNC server to 0.0.0.0, so it's publically
available.
(From OE-Core rev: 883666821ec46483bbfb9b3cb84c5afa8118a553)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The script was erroring out without a hint on what failed.
(From OE-Core rev: 72266cfa3a12a19a94d9176ecca9d080658dbf2e)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The names of the -user files were changed to have the machine
prepended, but the includes weren't - fix the includes.
(From meta-yocto rev: c430d6a0d126df7a51c0f585665de6aebbeac028)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* otherwise it shows error about failing import
(From OE-Core rev: 65b2f068719f4cd6e1bd438e8714c2977bd93535)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Added ability to parse .zip files.
2. Added optional automatic dependency resolving for python
recipes(easy_install wrapper).
3. Fixed a few name/version bugs.
Give it a whirl by:
create-recipe -r https://launchpad.net/nova/folsom/2012.2.3/+download/nova-2012.2.3.tar.gz
Saves me some time unwinding python dependencies, and creating template recipes.
(From OE-Core rev: 1a491a4dde0d3618f8815182d12c21f76b64de5a)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* useful e.g. when sending pull-request to release branch with extra CC
for release maintainer
(From OE-Core rev: 52bc47756eb8a81ea07ef4bc06345ef335b30ceb)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
systemtap_target_arch() should also translate x86-64 (hyphenated) into
x86_64 for the -a param. Failing to do that causes systemtap to see
an architecture mismatch and create a cloned session with a bogusly
synthesized build directory path, and fails to compile the probe.
Fixes [YOCTO #3756]
(From OE-Core rev: 98cae0544884cb5700d42409ec4a9584a17dc9a4)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a script to wipe the sysroots and all of the relevant stamps, so that it
will be correctly re-populated.
(From OE-Core rev: ef98ff5ba562eb710b5a6fbd181fb1c4380010b2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bblayer abstraction makes it where multiple layers can be
configured and used at the same time. Some layers make changes to
support a specific machine, and should not have any affect when other
machines are in use.
For linux-yocto, all bsps are created with a user-config.cfg and
user-config.cfg and user-patches.scc. This means that those files
will be pulled from the first location found, which might correspond
to files customized for a different machine.
Instead of using the names user-config.cfg and user-patches.scc, I
propose a machine specific name be used such as
{{=machine}}user-patches.scc and {{=machine}}user-config.cfg. This
would necessitate that all references changed to these new names,
which would affect the yocto-bsp and yocto-kernel scripts.
With this change, it would be possible to have multiple machine BSPs
searched at the same time and to select which to build against by
using a command like MACHINE=qmeux86 bitbake core-image-sato to
override the default.
Note many of the standard BSPs do not seem to suffer this problem as
they do not use the common files user-config.cfg and user-patches.scc
that the yocto-* scripts depend upon.
Additions by Tom Zanussi:
- renamed user-config.cfg to {{=machine}}-user-config.cfg everywhere
- renamed user-patches.scc to {{=machine}}-user-patches.scc everywhere
- added the user-config/patches SRC_URI items to the qemu -rt kernel recipes
- fixed conflicts due to the new open_user_file() helper function
- updated user filename conflicts caused by directory renaming
- updated custom kernel files to match
Fixes [YOCTO #3731]
(From meta-yocto rev: c20bef60aa8d52971fb061d4b8d473ad19c03180)
Signed-off-by: Brian A. Lloyd <brian.lloyd@familyhonor.net>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- use migrate_localcount.bbclass to generate AUTOINC entries
which are exported to LOCALCOUNT_DUMPFILE
- import the generated AUTOINC entries
- one can migrate LOCALCOUNT to AUTOINC by executing:
bitbake-prserv-tool migrate_localcount
[YOCTO #3071]
(From OE-Core rev: ffab86f13cafb10d8d6273b6af8cd9a3c84eae20)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The BB and PM ranges were originally intended to use leading 0s to
ensure all the values were the same string length, making for nice log
filenames and columnar dat files. However, not everyone will do this -
especially if it isn't documented.
Document the intent. Make the generation and parsing of dat files robust
to either method.
(From OE-Core rev: 90dc44c8246f2a580fe4a41ce28c201e52307500)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Normally pre-canned properties are supplied as JSON from a file, which
the user can specify using e.g. the -i option.
We can reuse that basic functionality for dedicated command-line
parameters by sythesizing a JSON string containing those param values
on the fly and passing that in instead.
This adds the ability for the common creation code to accept JSON
strings as well as JSON files.
(From meta-yocto rev: 5a2e840b24822e018de94ec4f554363b59c4e8bd)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user specifies a layer priority following the layer name, layer
creation will proceed without further queries using the specified
layer priority and the remaining values defaulted.
(From meta-yocto rev: 84a0bd8940f82fb938972d7b026367d40c9472e7)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This does a bit of refactoring of the bsp-generation code to make it
generically reusable for generating non-bsp layers.
The first user remains the existing yocto-bsp tool; these changes
allow a second user, the new yocto-layer tool, to use the same code.
(From meta-yocto rev: 1527a0ee7bce08a527c9d80516531b17816dff17)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a 'layer' target containing all the data that will be used to
generate a generic yocto layer.
(From meta-yocto rev: 198a85f61ebd6435830285b2a9b1b925aea6779e)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is essentially 'the documentation' for the yocto-layer tool.
(From meta-yocto rev: 34229b931bad8fc0e4d4431bb5cb46fccbea03bf)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi
Darren Hart
Jason Wessel
Richard Purdie
Laurentiu Palcu
Paul Eggleton
Ross Burton
Stefan Stanacar
Peter Kjellerstedt
Saul Wold
Mihai Prica
Peter A. Bigot
Chen Qi
Hongxu Jia
Martin Jansa
Joe MacDonald
Yi Zhao
Nathan Rossi
Radu Moisan
Lukas Bulwahn
Kai Kang
Ning Zhang
Andrei Dinu
Khem Raj
Bogdan Marinescu
Alexandru DAMIAN
Henning Heinold
Anders Roxell
Christopher Larson
Koen Kooi
Tom Zanussi
Robert Yang
Franklin S. Cooper Jr
MiLo
Michael Halstead
David Nyström
Bernhard Reutner-Fischer
Brian A. Lloyd
Constantin Musca