Per Darren's feedback on this new section I updated changes based
on his comments.
(From yocto-docs rev: a5bbba42ec0da5b2f83f7a64ac8eef466e9c89b3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a section in the YP ref manual that gives reference type information
on adding a machine. This type of information is detailed well in the
BSP example appendix in the development manual. I don't want to completely
eliminate the information in the YP ref manual as is suggested by the
910 bug. I think referencing it in the dev manual for now works.
(From yocto-docs rev: e55dd8228d1376c9df01e320163862ddf35a5156)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on how to contribute changes to the YP resides in this
development guide. I took additional information from the YP reference
manual and merged it into the section here.
(From yocto-docs rev: 945dd29417cf51044332114e499b08fe24ef3077)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The YP reference manual had an appendix that included reference or
resource information such as mailing lists, bugzilla link, and
IRC chat stuff. This type of information is best suited for the
introductory area of the development manual.
(From yocto-docs rev: a5576ed0d3360cdb32070ade6577cb7687923b10)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This chapter was quite old as it had not been touched since the original
Poky Handbook days. I re-wrote the sub-sections with today in mind.
(From yocto-docs rev: e59bede734a8fe3e9b41698e2b42ba487ec80595)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In general, the term Poky can be replaced by "the Yocto Project."
The term Poky can be used as a term for the Yocto Project build system.
I left it in place for a few areas where it was easy and would not
be confusing.
I also performed general rewrites for the FAQ.
(From yocto-docs rev: bb24bcf21311c68576fb8c3fec86ad8303f557f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if passing expand=True to getVar() function, it will pass the
handling to getVarFlag(), which doesn't get any benefit from the expand
cache.
Call the expand() function separately in getVar() to make use of the
expand cache, which can decrease the parsing time by 40%.
(from current 49s to 27s)
(Bitbake rev: 6555a77c199f41bf35460138764e03e30c56d29f)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2.21.1 has disappeared upstream. There is no ChangeLog information for
2.21.1a, however diff reports only the addition of some cpu/opc files in
cgen/ subdirectory; the source code is otherwise identical.
(From OE-Core rev: 4ecf379aba11983b66be4fbe26e65aa28740ddfd)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add another item to the right-click menu enabled for log messages to copy
the message to the clipboard.
(Bitbake rev: 419b52e832f506504778d4d5957d1e77477bb513)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use KERNEL_OUTPUT variable to find the generated kernel image rather than
duplicating the existing path. This also means it can be overridden simply.
(From OE-Core rev: de5b502330ded38c0efe2c4e30967ef12dbad72a)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows pango to build on DISTROs which don't enable x11.
Also adjust the SECTION since pango isn't really an X library.
(From OE-Core rev: ac92a573dd38270a28967c76472435cfd7f9bdfe)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Package files disappearing during index generation don't cause a fatal
error. Make package file disappearing during filelist generation also
a non-fatal error.
(From OE-Core rev: f55c96b6d53ecff865145fa22f286c89c7336515)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* gconv is directory so test -f was always false as reported by Phil Blundell in
http://lists.linuxtogo.org/pipermail/openembedded-core/2011-August/008973.html
* -e used also for localedef which is file, just to be more consistent
(From OE-Core rev: feaf1bab56138cc1bc998a4201a60202a5b8cd28)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Initscripts are missing in target image in multilib case. This commit
adds the renaming logic for the related variables in multilib.bbclass.
This fixes the no response of mouse/keyboard in target system due to
the missing of udev startup script.
(From OE-Core rev: 477fc6e2fc034c68a250005461774bc8ecf91a52)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add "pkg_postinst" and "pkg_postrm" as renaming elements, which fixes
missing post install/rm scripts in target image.
(From OE-Core rev: a5c9f8af79c1632d2f3de5dd9627a7ca24fa0b76)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the orignal logic, the renaming will not work for "FILES_" if defined
variables as:
PACKAGES = "${PN}"
FILES_abc = "/usr/include/abc.h"
It is because ${PN} is "lib64-abc" so it will not be contained in
pkgrename.
This commit enumerates all element in PACKAGES, getting the original
packages and multilib packages, then doing renaming for "FILES_",
"RDEPENDS_", etc. This fixes a lot of missing files and incorrect
dependencies.
(From OE-Core rev: ea7c196b4097d64b4f42faccaf075334c297ba20)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use BPN instead of PN in FILES path to support multilib.
(From OE-Core rev: cb247225a96d57e67ce32c5674bb13b703e30a7c)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use BPN instead of PN in FILES paths.
This fixes the login issue by /etc/passwd missing in multilib images.
(From OE-Core rev: ec62502988f0d79a69013513f2246980e0d8c01c)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #999]
Copy metadata of qt4e-demo-image from OE for easy testing qt4embeded on embedded platform.
This image was tested on qemuarm and can run program "qtdemoE".
(From OE-Core rev: 612ab0aaf3e693b90bb18234e2517bfc87ee3f7c)
Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1392]
Updating the SRCREVs to pickup:
[
mips/rt: convert cascade interrupt non threaded
The preempt_rt kernel forces all irq interrupts to be threaded,
but special interrupts can be excluded from this conversion.
The cascade interrupt should be part of these exceptions.
In this case, irq2 is initialized before "kthreadd" task, which
converts irq interrupt to threaded.
If this irq is threaded, the kernel calls "try_to_wake_up" function
to wake up "kthreadd" task, but at that moment, "kthreadd" task
has no been initialize and try_to_wake_up wakes up a NULL task.
(From OE-Core rev: 7ceb78a42f7d9b6aa4b984d04ac13f8dc23a9095)
Signed-off-by: Liming Wang <liming.wang@windriver.com>
]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because unfs boot mode is unstable for qemuppc, disable
it temporarily.
(From OE-Core rev: 74ff1bc8c248824116ba4b787b10fa6ee0c13ce1)
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for a gzipped vmlinux kernel by specifying:
KERNEL_IMAGETYPE = "vmlinux.gz"
(From OE-Core rev: cb17b6c2a72f260c61b0ec46887c2a04ac5b3f80)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because of the gcc-crosssdk bug, cmake-nativesdk needs to search gcc
standard paths itself. Right now it was fixed, so remove the additional
CXXFLAG for cmake-nativesdk.
(From OE-Core rev: bac15cc98e136892d4c09f2470622965bd9dbbeb)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc-crosssdk can't find the standard headers before, and it was fixed.
So it is not needed to search the gcc standard paths by
qt4-tools-nativesdk itself.
(From OE-Core rev: be86cbf54f3aeeda1105acd153fe09348a7ac267)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [Yocto #1231]
crosssdk.bbclass uses ${includedir_nativesdk} to define target_includedir,
but includedir_nativesdk is not defined before. This makes gcc-crosssdk
can NOT search the correct standard headers and libraries search path.
Define includedir_nativesdk in bitbake.conf.
(From OE-Core rev: 46a02c30d372692282f2784870df6fd63c660b10)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For image type of recipes, we need to define do_package_write as its
do_build recrdeptask, which ensures that all packaging types listed in
PACKAGE_CLASSES will be built out.
[YOCTO 1370]
(From OE-Core rev: b68cd33673fdc17711d7b9fde9cc23b0d8498c17)
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because qemuppc has no graphic emulation, remove console=tty0
and make it run into 3 run level. This can reduce boot time
for qemuppc booting.
(From OE-Core rev: ba02844fd3c3e09b4c40bfff50c32bdcc27899fc)
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gcc-poison-parameters was added specifically to deal with an issue
on ppc targets and a bug when we build with -Os -frename-registers.
This bug below reports the issue and is fixed in gcc-4.6.x/mainline:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44618
Backport patch to gcc 4.5.1.
(From OE-Core rev: fef385e37e82a0eec743fbd1da11021b9e7158b5)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gcc-poison-parameters was added specifically to deal with an issue
on ppc targets and a bug when we build with -Os -frename-registers.
This bug below reports the issue and is fixed in gcc-4.6.x:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44618
(From OE-Core rev: 0fabe078a31591f41c3fdabe5aa9de1111ef82c7)
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switch to use the checkstatus fetcher API for the network connectivity test,
this has several advantages:
* we no longer print any messages to the console whilst the check is
being run
* we don't actually download anything, removing the need for tidy up and
making the code more concise
(From OE-Core rev: 81aa4bfbde871af1d569b64499c34a315bf6218e)
Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During the update of the bitbake recipe's string to 3.0.3 the internal
version marker in the kernel stayed at v3.0. This meant that kernel
configuration auditing the constructed file couldn't be found and audit
warnings were thrown. This syncs all the recipes and get back to
clean configurations.
(From OE-Core rev: 2be439c14790fec8ad7ffe1b6c531d41d0329eaf)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was incorrectly referring to SRCDATE variables in a context that should
have been SRCDATE destinations.
(From yocto-docs rev: eb255d9369b5bb3905a586433d472fd100c737dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul sent me a bunch of minor edits and technical corrections
for the ADT, BSP, Development, and YP reference manual.
Most changes were taken as he submitted them. However, some
formatting conventions were not followed in the commits he made
to yocto-docs/paule/docs2. After merging them to my yocto-docs/master
branch I fixed some issues.
(From yocto-docs rev: 93f4ea2dee976448f623953e801a80d59736450a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -b option is not required to show the environment used to build a
specific package; usually the best practice is to specify the package
name alone.
(From yocto-docs rev: d59772fd7edd76dbc8018479c072badb591601c3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add note about specifying a full revision ID to prevent querying the
remote server on every parse
* Mercurial also supports this variable
(From yocto-docs rev: 47ce273dd751b0ae32b5c53310b6aedc4dade2ef)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These documents do not have titles when showing up on the website; set
the title tag value so that they do.
(From yocto-docs rev: baf958e3f49317689275b14dd31c6141f36c8c65)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add documentation of LAYERVERSION, LAYERDEPENDS and new layer priority
behaviour
* Improve some wording
(From yocto-docs rev: be7c10f3b8b35ff231e5974a48936e66fd49fcbc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-live and -directdisk image have been removed; add a tip about using the
live option in IMAGE_FSTYPES to build any image as a live image.
(From yocto-docs rev: ef7c508a4073c4f04c2368420e64a5d6620c8fbc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* xterm is now the default
* Konsole from KDE 4.x will no longer work due to changes in behaviour
(From yocto-docs rev: 031a619ca19dbc2011a4df7bba1c332f2770e15d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We really need to have LIC_FILES_CHKSUM in all of our example recipes,
because it is now mandatory.
(From yocto-docs rev: 76998b7c54246e0505cf01b21d65d04ab285f1f0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Document that LIC_FILES_CHKSUM is mandatory, when gets validated, and
improve some wording.
(From yocto-docs rev: ca878d7b0c84812ef29bbaf5894c96dd89500ec9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable was renamed (to match OE) in the Yocto 1.1 development
cycle.
(From yocto-docs rev: 5cda8fe3b5dd18b629ccd13427da3b5743ae66ce)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace the reference to this being the manpage.
(From yocto-docs rev: ebb689a8ccc2aaf5d21341c69899588e77d5172c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Dongxiao Xu
Paul Eggleton
Joshua Lock
Mike Crowe
Phil Blundell
Dmitry Eremin-Solenikov
Martin Jansa
Xiaofeng Yan
Bruce Ashfield
Liming Wang
Kang Kai
Jessica Zhang
Kumar Gala