add control for generic grub pc via serial line
Implementation [YOCTO #5615].
(From OE-Core rev: 01968e9244d0cf3deb1ec5cfb8e562d3b364add6)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
_EOF marker was not used properly
(space left before end of line).
(From OE-Core rev: 913fd224499c57c7596bd49e1eec5f570c3edf68)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Overwriting of /etc/mtab would fail as below if the /etc/mtab link already
exist during installation phase, this patch fix this problem by checking
existance of the link before try to overwrite it.
Error message during installation if the /etc/mtab exists:
"cat: /proc/mounts: input file is output file"
(From OE-Core rev: 5cd96e28825d345650be878d4b7be4fea2996839)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For automated hardware testing, boot process control
via serial interface is needed. As such, in grub, serial
line support is added upon testmaster image install.
Also add a specific timeout to automatically start
the master image upon start of testing phase.
Tested on multiple hardware targets without issues.
(From OE-Core rev: 219228805a4d5d822894c8f6c2526e1b9a8609ff)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Close the definition list before adding the notification, and
restrict the notification width to avoid uncomfortable line
lenghts.
(Bitbake rev: b82f724c271c43218dc28440219adcea968e2a26)
Signed-off-by: Belen Barros <belen.barros.pena@intel.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Display message if no images are generated for a target. This
commit was amended to have more conditions for displaying the
message.
[YOCTO #6094]
(Bitbake rev: ac1911eb857f4759ed085c8a4fc4b47cefafcd7a)
Signed-off-by: Farrell Wymore <farrell.wymore@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is implemented as a django management command.
For the moment the 'manage.py perf' command will track the toaster
'gui' urls http response code and load time.
To use it:
1. do your toaster builds
2. ensure toaster is started
1. cd bitbake/lib/toaster
2. ln -s ../../../build/toaster.sqlite
3. ./manage.py perf
(Bitbake rev: 4a1fc6851d21500150715f0e8fa03c0b228ec5f2)
Signed-off-by: Ionut Chisanovici <ionutx.chisanovici@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the target (packages) page had to refactored to
allow the displays to differ depending on the caller
namely the license manifest link. Amended to make the
link from the tag rather than the pathname itself.
[YOCTO #6291]
[YOCTO #6079]
(Bitbake rev: b21a2af9411da17d49521820fa512292e89c856e)
Signed-off-by: Farrell Wymore <farrell.wymore@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Right now shared work signature data is saved to the non-shared directory
which is confusing to everyone including bitbake. Whilst its messy,
extra the stampbase data instead, which ensures the sig data is written
to the correct location alongside its corresponding stamp file.
(Bitbake rev: 7ae1d4844d9d3a76f86ef32c5a794e51e334e588)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its possible sstate symlinks to other sstate mirrors which then my get
removed/cleaned. If we find invalid symlinks, skip over them rather
than error with a backtrace.
(From OE-Core rev: 5ed9bb42abf93aa084dd23ca68cc996a94a51a10)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the preconfigure task was added to gcc, it wasn't added to sstate's list
of possible shared work tasks. This meant that diffsigs wasn't able to find
the preconfigure sigdata/info file since it has inconsistent naming.
This adds the task name to the list. Ideally this list would be autogenerated
or not even required, right now its a sanity test that the shared work
code works as intended so is best left as is.
(From OE-Core rev: 72032f6dd6724663a3417b1d1b666d9a63fcbfdb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable SDL by default for nativesdk as we do with natve, this will
allow qemu with ADT to use graphics no vnc by default.
[YOCTO #6446]
(From meta-yocto rev: 42001a84f793841a5859b53fe7bc565ac6a94833)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various grammatical and typo tweaks all in fetching chapter, including
moving CVS section after wget section for more logical content flow.
(Bitbake rev: 39bbc8f82894ca521d35645cd618dd131fde38ef)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6430]
I removed an old .PNG file that is not used.
(Bitbake rev: dc5adbb8ce140b6898f18bb99bac02aac16f2ac8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5772]
I added the five XSL templates to the template folder. I updated
the bitbake-user-manual-customization.xsl layer file to include
the new templates.
(Bitbake rev: e1c24a79ededb2dd4ac5ce09fcfdf93218261907)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I deleted the commented out xsl:param line that attempts to
set labeling for Appendices. It had been replaced by a working
line.
(Bitbake rev: bf79174e02cc113e0512bcadc3ab0fdffd138215)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Exchanged "SRC_URI" for "URI" for clarity.
(Bitbake rev: 90cc450671eaabf917c10a8d01b729b6bc0f544c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the "GIT Submodule Fetcher (gitsm://)" section to the
fetchers chapter. This information was provided by Chris
Morgan.
Reported-by: Chris Morgan <chmorgan@gmail.com>
(Bitbake rev: a3a3331e7118fd3139fe5a80b157a5a5b38631de)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need use EXTRA_OECONF_append_class-native rather than
EXTRA_OECONF_class-native.
(From OE-Core rev: 5e1560b98680c79c979b8f9325f9f9997f9fd438)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 3.15, and 3.14.5+ kernels introduced a change to trace_block_rq_complete,
which triggers the following build error:
probes/../instrumentation/events/lttng-module/../../../probes/lttng-events.h:151:6:
error: conflicting types for 'trace_block_rq_complete'
| void trace_##_name(_proto);
| ^
|
probes/../instrumentation/events/lttng-module/../../../probes/lttng-events.h:117:2:
note: in expansion of macro 'DEFINE_EVENT_MAP'
| DEFINE_EVENT_MAP(template, name, name, PARAMS(proto), PARAMS(args))
| ^
|
probes/../instrumentation/events/lttng-module/../../../probes/../instrumentation/events/lttng-module/block.h:235:1:
note: in expansion of macro 'DEFINE_EVENT'
| DEFINE_EVENT(block_rq_with_error, block_rq_complete,
The lttng 2.4.x-stable branch contains the fix (and several other small fixes), so
we bump the SRCREV to import the change.
Build tested against 3.14 and 3.10.
[YOCTO #6459]
(From OE-Core rev: bb304f306c0f6ee496a75a67c0bb8a6c1e41ddf2)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1949]
Updated the following tasks to note that they "clean" out some
areas when run:
do_populate_sysroot
do_deploy
Also made some notes to the do_cleansstate task about attempting
to clean remote mirrors.
And, made a change to do_cleanall to specifically mention that
DL_DIR is cleaned.
(From yocto-docs rev: 7e532b17ccd89e43d3661c733ce1f06a52066c29)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5566]
For the dev-manual, I created a new section called "Working
with Source Files." In the section, I cover how to set up mirrors
and also how to pre-fetch source using the bitbake -c fetchall
<target> command.
For the yocto-project-qs, I removed the mirror information in the
"Super User" section, which became redundant with the new section
now in the dev-manual. I also, removed the fetchall variation of
the bitbake command. Both areas reference into the new section of
the dev-manual now.
(From yocto-docs rev: f314061e3e752d35ea85ed16a60f7f9292180921)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3729]
I made an editing pass through this section. Found some minor
corrections.
(From yocto-docs rev: 314ec3a066de7328b6c6893ce33cc0e5faa8700a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5895]
Some minor edits to the section. I found a grammar error and a
mis-wording.
(From yocto-docs rev: 86e85512279a1379d9b30825d6af3e508faa320a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4958]
Added a new section to start the Migration chapter. This
section will hold general migration issues that are not tied
to a specific release.
(From yocto-docs rev: e78ae7c64ae5fa7e7a5b1f804fb40b5690a4e899)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul reported that "buildimg" was being used as the class name where
it should have been "bootimg". Not quite sure how this slipped through
but it has been fixed now. There were five occurrences.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: fdd6a6725bd22e4272a99a3da179cd69c4a221a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a note at the end of the section to point to a wiki page
with more information.
(From yocto-docs rev: ba310c34844e9e496d7ff1164691930d4f330f93)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a stale link. Updated to point to the published
HTML file now and to mention that you can find it in the
Source directory.
(From yocto-docs rev: bc51935372cfd81a77f201768173d8b1eb1677c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I scrubbed the manual set for appropriate places to reference into the
do_clean* type tasks. Found and added several occurrences.
(From yocto-docs rev: 01594823b1d556bc70e928af1838039cc15a816d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6430]
The style sheets were carrying over old .PNG files that are not
part of the manuals. I have removed the statements that were
using them.
(From yocto-docs rev: 6e4fa419b9367ab5e34b9aa8010a24980416dc7d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6400]
Replaced the sentence in the note to specifically note that the
genericx86-64 BSP has been added for 64-bit Atom systems.
(From yocto-docs rev: ad2cbe806580c880708e5e60435046b07258a537)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a ptest section to the "Moving to the Yocto Project 1.6 Release" section.
Fixes [YOCTO #6400]
Added a new section named "Package Tests (ptest)" to the migration
section stating that ptest is built but not installed by default.
I also added some cross-reference links to a usage section and to
the ptest.bbclass section.
(From yocto-docs rev: f752867265a1299b1d2790ae59a990a7991a6108)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Failure occurs during make, not do_compile as I previously
noted.
(From yocto-docs rev: 467ea8aa43fac14e3092a30ae15d1ace7a6558ab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6390]
Edits to the "Debugging Parallel Make Races" section. Changes
originating from trying the procedure.
(From yocto-docs rev: 537f5bd8918450e30ea87465025f0069232cb229)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6390]
This is a section on parallel make race situations. The draft
is the first cut at the section.
(From yocto-docs rev: c225d7fe121270a6f82b9fbffa78c7e3914b113d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was inconsistency on how we refer to a task name throughout
the YP manual set. The proper way is "do_<taskname>". Some
occurrences did not include the "do_" prefix. These have been
fixed.
(From yocto-docs rev: b32821bb0d3e6de7bca68b25c662a023526a10c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed a view wordings to more accurately describe what was
going on. This was feedback from Paul Eggleton's review.
(From yocto-docs rev: 6152a849c0e26178ce13a29b1f353d1b2912427c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The prefix is used for DocBook 5 Schema. We are using the
4.2 Schema. Having this prefix disabled the permalink titles
XSL template (section.title.xsl) produced permalinks with no
titles. Because I removed it in the section.title.xls file,
I also removed it here for completeness. Note that I don't
think the template is used at this point but I made the change
just in case for the future.
(From yocto-docs rev: 8eca4299d0408c1095bfa8aa7b9f04e246db0c0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Restoration of some parameters to make sure the TOC
is generated correctly.
(From yocto-docs rev: 0f4c4b526fd0e8c3cce3fc033c660112e5dc517f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mini-TOC was not being generated for the appendix
sections. I added the xsl:param to add it in.
(From yocto-docs rev: 3c083e697b8b6cc639885da45830ce9c4170b00e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not having a section was messing up the TOC for the
FAQ in the mega-manual. I added a section.
(From yocto-docs rev: d4a34cb1815e3e12e73e08b5ae7b2027b5f03823)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cristian Iorga
Belen Barros
Farrell Wymore
Ionut Chisanovici
Richard Purdie
Saul Wold
Robert P. J. Day
Scott Rifenbark
Robert Yang
Bruce Ashfield