Currently the script will attempt to continue even after a fatal error.
Add a die() routine which will abort in the case of a fatal error and
call a cleanup() routine to unmount any images or devices and remove the
TMPDIR.
Move the variable assignment and directory creation earlier in the
script, making it more obvious what we need to clean up.
(From OE-Core rev: 40fe82fecf7a94b24893862ac17ee2bc749fc5e8)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add logging functions: error, warn, info, and success, using tput to add
color highlighting.
Use these routines throughout the script, replacing echo statements and
adding "|| error" in several places to eliminate silent failures. Add a
simple exit block which checks for issues encountered while running.
(From OE-Core rev: b5a3f6465a7fd8e821b81da053bf7e11535f1652)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than only copying the EFI/BOOT dir, copy the entire EFI dir
recursively. This allows for custom configurations to be enabled
implicitly with no extra work required.
(From OE-Core rev: f6f243bff4fa7c0e876a506a7013c86e0141556c)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 6295]
Add gummiboot support for images built using:
EFI_PROVIDER="gummiboot"
Add conditional configuration for GRUB and gummiboot. Provide some
messaging about which is being performed.
(From OE-Core rev: b0c86d8149dffd72d0dbd2451031f30953e36dc7)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provide reasonable feedabck if the mount commands fail.
(From OE-Core rev: 07cf8cfb843311d7f868c502d542af51f64d71bd)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid some mkfs warnings by using all caps in the volume names.
(From OE-Core rev: d80d730a5fa84d3a036d1fc8290620e90d5db460)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow the user to specify a symlink as the host device. If a link is
used, mkefidisk will now dereference it and use the link target when
looking for sysfs information.
(From OE-Core rev: 67bbfac55555c4e35ed9a84409aedb9b278b3de9)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It should be possible to generate a disk to a file using a loopback
device with mkefidisk.sh, which is useful for booting simulators. To
make this possible the partitions for the loop back need to work
similarly to the mmc devices. The mkfs.vfat also requires and
additional argument to force it to write to something other then a
real disk.
Example:
qemu-img create -f raw bigdisk 4G
dev=`sudo losetup -f`
sudo losetup $dev bigdisk
mkefidisk.sh $dev tmp-eglibc/deploy/images/qemux86/core-image-minimal-qemux86.hddimg /dev/sda
sudo losetup -d $dev
Note:
Also a bug was fixed in the mkefidisk.sh where if the disk you are
writing to initially has an invalid label the size of the first
partition will be computed incorrectly. For the simulator disk
creation this is generally always the case, but this can happen with
real hardware as well.
(From OE-Core rev: 254899824900f2e8c6a34d2ad1b8cbea91acb4ae)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apparently $[...] isn't valid in dash, so use $((...)) instead for
mkefidisk.sh and ddimage that both start with $!/bin/sh.
(From OE-Core rev: d509739ca54e6b70f2dcc216b831fc02c64293a6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some automounters are rather overzealous and like to mount things
immediately after partitioning. This can happen if the disk is being
reused and the partitions align exactly with the existing partitions
which have already been formatted. Move the unmount code into a function
and call it before and after partitioning.
(From OE-Core rev: f1854e458e5e77806b1fc837033500fa91272261)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With automounters abounding it makes more sense to attempt to unmount
the device rather than abort, just like ddimage does.
(From OE-Core rev: f522ff19ba4b80788d66a2c58ee50b86fdfea15f)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While GPT works fine when writing to actual media, it cannot be reliably
used for distributing disk images as it requires the backup table to be
on the last block on the device, which of course varies from device to
device. Use MSDOS tables instead.
Use mkfs to label the filesystems as msdos tables do not support
partition labeling.
(From OE-Core rev: 049ea1e0a6a1017a5020de38bd7ce93515bd62f4)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Most firmware implementations use the EFI specified
EFI/BOOT/bootia32.efi (and similar) boot paths. Only broken firmware
uses different paths for removable media. In those cases, the user can
add their own startup.nsh.
For the compliant case, selecting "Shell" from the EFI boot menu should
go to the shell.
(From OE-Core rev: d031cdbf40231b8c103d78c69252bf9d584d0605)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without a reliable way of knowing if the target device with be an
asyncronous block device on the target (MMC or USB), err on the side of
caution of always specifcy "rootwait", ensuring the kernel will wait for
the device to appear and not abort if it hasn't appeared in time for
mount.
Document the remaining kernel parameters added by this script on the
same line as rootwait.
(From OE-Core rev: 5b6a6a3872fd341cf978be40c69707223e3c29df)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no need to boot with "rw". Booting with "ro" will allow for
fsck to be run during boot, and a proper /etc/fstab will still ensure
the rootfs is "rw" by the time the user can interact with the system.
Change the "rw" to "ro" in the kernel parameters specified in the
generated grub.cfg file.
Fixes [YOCTO 4036] mkefidisk.sh hardcodes 'rw' as root mount option
(From OE-Core rev: 960f0cbf85a4124adbc74d8b2ceb09a7d39ecc04)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current script only replaces an existing root= kernel parameter
which can result images created without a root= paremeter, even though
the script expects a target rootfs parameter.
Rather than replacing the root= parameter, delete the root= parameter if
it exists, then append an appropriate root= parameter.
Fixes [YOCTO 4035] mkefidisk.sh forgets to add root= parameter
(From OE-Core rev: e5dbec7e7d3bb29676280823b0337ad429c75120)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The script was creating a FAT fs with EFI files in it, but wasn't setting the GPT GUID.
Using 'gummiboot install' natively failed because of the missing GPT GUID, so fix that. While we're there also set the name to "EFI System Partition".
(From OE-Core rev: 203ca80ee27948e2c68aab8ea48e51ff1c1157d5)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The script greps for 'Disk', which doesn't work when your crazy Dutch distro has parted call it 'Schijf', so force LANG=C.
The second problem is that 'Disk' might be a substring in the Model entry:
[root@Angstrom-F16-vm-rpm contrib] # parted /dev/sdc unit mb print
Model: SanDisk SDDR-113 (scsi)
Disk /dev/sdc: 3905MB
(From OE-Core rev: 2e404930f6fc7d818d2f429793e84bce77163afd)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes it is convenient to prepare a bootable image from the
host rather than using a live-image to install to a disk on the
target.
This script takes a live image as input, partitions a device, and
performs the installation just as the installer would if run on
the target.
(From OE-Core rev: 7225c6739f9f1e51741a42437692868165aa1dfe)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart
Jason Wessel
Chen Qi
Paul Eggleton
Koen Kooi