Three cross-references to the section "External Development
Using the Meta-Toolchain" were removed. This section is going
away in the YP Reference Manual. There is no replacement section
that makes sense so the cross-reference is removed.
(From yocto-docs rev: 97ed489c335d6d2782cc3ed684fce92c78b4fec8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a small review comment to the section based on reviewer
feedback.
(From yocto-docs rev: 68cc2bac8dca78572d197af326452bbd37c947f9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Using Pre-Built Binaries and QUME" section needed to incorporate
some information from the YP Reference Manual. I have merged those
changes in and did some re-writing to blend it well.
(From yocto-docs rev: 5c20f00f9ec75c19fd0106c9f241751381ba7e3c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the section about developing binaries using QEMU. This section
is better placed in the YP Development Manual.
(From yocto-docs rev: 83a4e84b69051f217993d80b525e9d07d64d1c6d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Inserted a note warning the developer that it is their responsibility
to understand and meet all licensing requirements if they are going
to be including images as part of a BSP.
(From yocto-docs rev: b8154904be02a4185bf417f193eb125b8470bc8d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented review feedback from Dave Stewart and Tom Zanussi.
(From yocto-docs rev: 5ed73c29b6a46737a009a38b294bdd61e4c63d85)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the "Requirements and Recommendations for Released BSPs"
section. This section was requested by Dave Stewart based on
community input for direction on how to create a BSP that was
compliant with the Yocto Project. The input for the section came
from Tom Zanussi.
A spell-check was performed also prior to this commit that addressed
a few spelling issues across the file.
(From yocto-docs rev: 7ed0dd1093b33491231dec06f7b5f8e76004130d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the "Show a Particular Feature or Branch Change" section so
that it reads better. I also included some real examples.
(From yocto-docs rev: 42aa13c7fbf45abf869b056deec063be6682c70b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
According to Bruce Ashfield, we will be using linux-yocto-3.4. So
I changed the linux-yocto-3.0 strings to linux-yocto-3.4.
(From yocto-docs rev: 23df0251b04ed7c31ad2297a4a7870861554beef)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed two larges sections of old comments.
(From yocto-docs rev: df1b08b621f2b449c7575b86ec90c40f1606c43d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated a note to include information about what happens if you do a
kernel build and have your machine compatible with every possible
kernel. This extra information is useful for rational.
Reported-by: Bruce Ashfield <bruce.ashfield@windriver.com>
(From yocto-docs rev: e631ec44be49d456add6a53ff3db89016d187370)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example showing how to use pre-built images, the toolchain, and
filesystem was off a bit. I changed some wording to indicate using the
.ext3 filetype of the filesystem. Previously it talked about expanding
the tarball version but the example has been changed to use .ext3.
Also, the environment setup file has been mis-named forever. It should
have i586 in it and not i686. And, finally, the image name does not
have a release number as part of the name.
(From yocto-docs rev: c9953c9bb716ae5be183020c5143152226bf1de5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The linux-yocto_3.2.bbappend example was out of date. There is no
longer a kernel features statement in the last part of the section.
Only COMPATIBLE_MACHINE, KMACHINE, and KBRANCH remain. I removed
the fourth one from the text description and the example code.
(From yocto-docs rev: 1a6d3cad48f1b52e5b029434ce655940c6024694)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note telling the user that the commit ID strings in the
example might not match the actual commit ID strings found in
the .bbappend file.
(From yocto-docs rev: 5cb845361c8ce8b60dcafc28d1bc01d54badd67a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2459]
I provided better definitions to the -dev and -sdk image types.
They now call out host development and target development.
(From yocto-docs rev: bd2c0db27d7eb038931550a96752f961ea6b1d9c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The description had reference to a toolchain, which is evidently not
true. I have re-worded the description so that it does not mention
inclusion of the toolchain.
Reported-by: Wolfgang Denk <wd@denx.de>
(From yocto-docs rev: 5a918d7d20133b85badd082c81cfe4af18709316)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2445]
Added a note telling the user not to install Eclipse from the distribution's
package repository but to rather be sure to install from the official
Eclipse download site.
Also, changed the tarball name from having a "3.7.1" in it to the
recent version of "3.7.2".
Reported-by: Lianhao Lu <lianhao.lu@intel.com>
(From yocto-docs rev: f50d0071e39a5e8424633a55ab2c3fdc75e9686d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to a bug (2256) the example that changes the kernel configuration
through menuconfig did not work. I have re-written the section
to now start with the default behavior of CONFIG_SMP=y and then
have the user change the configuration to where it is not set.
The changes include the reversing of the flow and the work-around
needed due to bug 2256.
(From yocto-docs rev: 6fa9eee12ed83f81470beb9792fb4fc1c5104f69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added entries for the Manual History table for upcoming 1.3 docs.
(From yocto-docs rev: 430b384035593cd05c4f286e20c01f0fe72da8ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To publish manuals for the "latest" set of docs, some variables
need changed. DISTRO is 1.3, DSTRO_NAME is 1.2+snapshot, and
POKYVERSION is 8.0.
(From yocto-docs rev: e5a21791b4e588631910f102b660c1709ab7a0f4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove mercurial as this is no longer needed.
linuxdoc-tools was mentioned twice in the CentOS list.
We no longer support Fedora versions older than 15 so remove this note.
This commit applies to 1.2, 1.2.1, and 1.3.
(From yocto-docs rev: 4a7e8cc3d69d5c2f9aacedc5f7e2ff9657ef850f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered a bug when publishing documents. There are two scp
commands that copy a document's files and figures to the appropriate
directory in the srifenbark@yocto-www:~/www.yoctoproject.or-docs
server where the manuals are published. The second scp command
had a "/figures" at the end. This was causing a new "figures"
directory to be created within the "figures" directory. This
redundancy shows up as missing figures in the manuals if a new figure
or changed figure is ever added to the book after initial
publishing. I removed the extra "/figures" at the end of the scp
command.
(From yocto-docs rev: cef3634e695f61bfb8465f1fb7a88e4e8a9a00f1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Need quotes around the INHERIT statement.
Reported-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
(From yocto-docs rev: 96f03be0d2595b4b788d8bb2110fe8801279f3f9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that compliles the altered code will not run now when the
KMACHINE statement is in the linux-yocto_3.2.bbappend file. I have
commented it out of the book.
(From yocto-docs rev: 3f67b34daf1ad598b4d07f5e2a60d8c63da754b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The KSRC example needs "_3_2" at the end of the variable.
(From yocto-docs rev: e6bcbe8504f72777a03e9b08de95d5e2741700a3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turns out the KSRC_linux_yocto ?= /home/scottrif/linux-yocto-3.2.git
statement in the linux-yocto_3.2.bbappend file in poky-extras needs
quote characters around the pathname. I updated the example
statement.
(From yocto-docs rev: eac1b53c04398152b41ac280fdc030615c165112)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found two instances of "yocto/standard/common-pc/base". this should
now be "standard/default/common-pc/base".
(From yocto-docs rev: a2f4ac3885de1157e6d718cfea9b29a67c76aeb0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel used for example is no linux-yocto_3.2. I changed
all occurences of yocto_3.0 over to yocto_3.2
(From yocto-docs rev: 7ee8f86fd0f44197901c851a16c58aa5f6851b1f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example code with the printk statements needed to be altered.
And the wording supporting the example was modifyied to be more
generic.
(From yocto-docs rev: f76465e920c3959230196814f17890065c613730)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Looks like calibrate_delay(void) changed in the example. Updated
to the most recent code.
(From yocto-docs rev: f1abcbf730c4b50ceb925e41181429c04eb2d55e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the example sets up the bare clone. The shell output changed
because the upstream repo changed to
"origin/standard/default/common-pc/base".
(From yocto-docs rev: cc3a8dde7b7f70174225ec95303d0280697d674b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new figure was needed in the Kernel appendix. I added that
figure to the block of code that creates the tarball for the
denzil branch.
(From yocto-docs rev: 352093f3eabf64052d78a41fd997993d09aa10ef)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New image needed for Denzil. I created a new file named
"kernel-example-repos-denzil.png" and copied it to the
Figures folder. I also deleted the
"kernel-example-repos.png" image.
(From yocto-docs rev: 97105187735c15e452580a0174897517c1860f2c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the "Building and Booting the Image" section there is an example
.hddimg file. I updated the file to be the actual file used during
the BSP example build.
(From yocto-docs rev: 165feb4d501a2ed984b742ea9f10e6c2037972da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For 1.2 you evidently need to add $HOME/poky/meta-intel to your
bblayers.conf file.
(From yocto-docs rev: d5565d9aa14590622373996a037cc16d34e9107f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wording for linux-yocto_3.2.bbappend file updated to support the
addition o fhte KBRANCH variable.
(From yocto-docs rev: 267d7dffc05dc495dbd27b6435bea7ba48cd4cfa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
edited it to now include the PREFERRED_VERSION variable.
(From yocto-docs rev: 72d8f7bfcad0fff191c998f90369499a78d62696)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on changing recipes-kernel was way out of date.
I updated all relavent changes.
(From yocto-docs rev: 91538864e6da8c4d0a495e52feafe01ce7afea9d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kernel used in now 3.2 and not 3.0.
(From yocto-docs rev: 974cb0c3665a2767a04ab6261692e93cc2f9200b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The layer.conf file now uses a LAYERDEPENDS variable. I added that
to the example.
(From yocto-docs rev: 237eb7ba897479935ac4c3165ce2cb350143a1e3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel in mymachine.conf had to be changed from 3.0 to 3.2
(From yocto-docs rev: cd94a4d45a062e9282de15dfda25983c500c0548)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The output for creating and switching to the denzil branch
for meta-intel needed updated.
(From yocto-docs rev: ad29c8f73ab3cec930f21939744cff322b43dfdc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The variable substitution had to be changed from
"&DISTRO_NAME;-6.0.0.tar.bz2" to "&DISTRO_NAME;-&POKYVERSION;.tar.bz2".
(From yocto-docs rev: 258b4c7fb46d2e6fb2da7bf2f59cd4f5c035b15b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a link to the Yocto Project Files term.
(From yocto-docs rev: 9d92248cb5dd862095e815c008e1f47e7518856a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to remove "poky-" from the front of this variable that resolves
to a YP Files top-level name from the tarball.
(From yocto-docs rev: a9ccf2bec4f2f916e854d10aa992f0c45eb0ed3f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Throughout the documentation set I have refered to the YP build
system generically in order to avoid use of the "Poky" term. Richard
has suggested that we refer to the actual thing that does the building.
So I have added BitBake to this particular sentence to refer to the
tool.
(From yocto-docs rev: eaed76bbf97bd34205eace952a1efbc600890815)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file was replaced by a release-specific file named
"kernel-overview-3-denzil.
(From yocto-docs rev: 85220f16ce10086372f9d81c61cb4e3eb40d52e4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dev-manual/dev-manual-model.xml: The Bare Clone and Copy of the Bare
Clone figures are out of date for denzil. These needed to be
re-done so they use "linux-yocto-3.2.git" and "my-linux-yocto-3.0-work"
as the root names. This presents a Makefile issue when making the
denzil and pre-denzil versions of the manuals. Whenever you use a
different figure for a different release, you need to involve the
BRANCH variable in the Makefile. This is necessary because you are
using different figures in the generated tarballs. The set of figures
could be unique to the release. The outdated figure is
"kernel-overview-3.png" and will eventually be removed (later commit).
I created a new figure named "kernel-overview-3-denzil.png" and used
that in the dev-manual-model.xml file.
documentation/Makefile: I updated the Makefile to test for a
"denzil" release build and if so include the new file in the
generated tarball. This commit adds the new .PNG file as well.
Fixed the Makefile so that if you don't supply a BRANCH value, it
uses the latest figures (denzil).
(From yocto-docs rev: b3550d7640343cd5459efb04c591b81a1e41bc1b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the Note wording to work with the list and not be specific
to a number of supported kernels.
(From yocto-docs rev: 04b941264c001fc2f8e105637436b8d95a770357)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list specifically named four kernels supported. I changed it so
it would say "several kernels".
(From yocto-docs rev: 8134eae4bce85e18a4402606e2cac6cb422cf0cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several things out-of-date for step five of the BSP Creation overview.
(From yocto-docs rev: 6bf1c93315c2fe604dbe468a29d9e2159bf7aceb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link and wording to the YP Downloads page on the website was
wrong. Fixed it up.
(From yocto-docs rev: 191856e4441bcea078868d22d019f4f1cdd62512)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more detail to the pathname for the example
formfactor_0.0.bbappend file.
(From yocto-docs rev: 4bd9ac9f189689ddb8806c750545223e1e55cd4b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a reference to Yocto Project Files and provided a link.
Put in an updated version of the meta/recipes-bsp/formfactor/
formfactor_0.0.bb file in the example.
(From yocto-docs rev: 031113db6d67beaee2e4f8225c7d4d2bc9380b05)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated various shell output examples created from cloning various
Git repositories, etc.
(From yocto-docs rev: 76024b2648c383bf19e6fee81d54c6a992e8d593)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the shell output example when user creates a bare clone
of kernel. We use linux-yocto-3.2 here.
(From yocto-docs rev: 69e3aa7a42d03cff23379432f5d1b496157d5c0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that creates a local branch based on a release tag
in the "Repositories, Tags, and Branches" section was not optimal.
Darren Hart informed me that naming a local branch the same name
as a tag confuses Git. Plus, the "-b" option was mis-placed.
Renamed the local branch to have "my-" in front of it and moved
the "-b" option earlier in the command.
(From yocto-docs rev: 29f4ea267ef687431e09eca4634fcb6cc48a6f81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example in the "Repositories, Tags, and Branches" section that
creates a local branch that tracks the upstream branch is incorrect.
The syntax should be "git checkout -b &DISTRO_NAME; origin/&DISTRO_NAME;
Fixed it.
(From yocto-docs rev: ec80d43ad97370771c9cd7f7e6a4637db5f80e9b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added Hob and Build Appliance to the list of other stuff the user
might want to reference.
(From yocto-docs rev: 4c94654e53e422e5e0a54476e3ca88e682f177af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better wording for the role of BitBake. Updated shell output for
the clone of poky.
(From yocto-docs rev: eab184de2bd2b22def9dbe0c93b153ec9334402b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following packages no longer need to be installed on the host
system:
* python-psyco
* help2man
* cvs
* hg
Additionally, linuxdoc-tools was mentioned twice in the Fedora list.
(From yocto-docs rev: 89fc20a1a54f92165323cb2dbcfc5063c0205369)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As suggested by Paul Eggleton and Richard Purdie, the example that
describes another method for creating a cusomt image was modified
so that it is based on an existing recipe instead of requiring a
new image.
Reported-by: Paul Eggleton <paul.eggleton@linux.intel.com>
(From yocto-docs rev: 65287ca135422a588d799143d93ccd4d058684ff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After some discussion from Song and Richard, the dates in the
manual revision table has been updated to "April 2012" for the
1.2 release.
(From yocto-docs rev: b3fc2ec7c5aedb8ea0a2d502bdcd7e8f4092ed96)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did a quick and dirty scrub over the manuals for the strings
"1.1" and "edison". I found some instances that were not properly
variablized. Also, discovered some references to the
linux-yocto-3.0-1.1.x. All but one instance of this needed changed
to linux-yocto-3.2.
(From yocto-docs rev: 620fb4b7626defcefc8a039de09ae4599ee7f454)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Five tables updated for the five manuals that have the tables.
Used "May 2012" as the date.
(From yocto-docs rev: 0d4d46ba300c07ff9c73186506be5b409bef9d1b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a blurb about the Build Appliance to the start of the QS.
(From yocto-docs rev: b2766121c05740300fd5a6cea2f3b8a2f62db6e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel26 is now obsolete so remove mention of it from the docs.
Removed from docs.
(From yocto-docs rev: 7b9da106d746192f802095584b04e3ee8347eabd)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
added the link for the Build Appliance page to the description of the
self-hosted image.
(From yocto-docs rev: 719ba4308489b29eefa7f08ddffb65bd5e41fc2c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: c0ee8ce391114f7a5b4f1c59fdf997ba4f3bcf75)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the self-hosted-image to the list of images.
(From yocto-docs rev: a8265cb523705a374d23bf60aab5b7969ad937fc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A reference to meta/recipes-sato/tasks/task-poky.bb is made as a good
example of a task; however, this file / recipe doesn't exist. I
replaced it with meta/recipes-core/tasks/task-core-boot.bb, which I
think is a both useful and basic example to consider.
(From yocto-docs rev: 977877efa7781dd00c53cfa914dd710de7d934a1)
Signed-off-by: Robert Cochran <yocto@mindchasers.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New section in the Packages area for CentOS.
(From yocto-docs rev: 7ee9f2d09fe9b83bccdf4b4f431672f34c31aca7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reading through the manual I discovered some inconsistencies with
how links were handled. I fixed this in both the QS and one anchor
in the FAQ appendix of the YP Reference Manual.
(From yocto-docs rev: 32444e839a1541ab2c02fa31cd094605d1a2429a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the "Super User" section I had the URL for the wget command
wrong. Replaced the "." character with a "/" character.
(From yocto-docs rev: 87ec41694d6665c0dbaaab94679b1f22335aa070)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Flipping values for the upcoming release
(From yocto-docs rev: 00a7b706af352d6103db712ec3f1f0a1b08f0eff)
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I put a bit of explanation in the "BSP Layers" section about
meta-intel being a layer that in fact contains other BSP layers.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: c57ba6050d7923018709221f7058443293ea6838)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding the new section "Customizing a Recipe for a BSP" has added
enough sections to this book such that the introductory area needed
some attention. I pared down the intro text to basically just
cover the manual's organization and a bit about BSPs. I moved
all the introductory common form stuff into the section that
just addresses the BSP form. This is better organization for the
manual as it is evolving.
(From yocto-docs rev: 9aec4ce47fb090ae2f6c5bed93da03e77ae49a4c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1962]
Added a new section called "Customizing a Recipe for a BSP".
The text was rooted in Darren Hart's comments. I implemented
them and then we iterated a bit on it.
Reported-by: Joshua Lock <joshua.lock@intel.com>
(From yocto-docs rev: f5e51d60312d9335a790023f193cae1ba76277ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: David Stewart <david.c.stewart@intel.com>
(From yocto-docs rev: 4df12f3437488f6d8dbfb54dd3de25f5636162c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied a patch from Robert P. J. Day to fix some small issues
in the BSP manual.
(From yocto-docs rev: 7744d5101fd2b5a46a53707976b8899eb03f1c08)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1980].
Changed MULTILIB_IMAGE_INSTALL to IMAGE_INSTALL in the multilib
example. This variable is no longer used.
Reported-by: Matthew McClintock <msm@freescale.com>
(From yocto-docs rev: dfcbecf945b19e559b39b5824dc6b8bb37c18702)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Example corrected.
(From yocto-docs rev: 844ffad1e3b998d62ea7c10273785d710dc3541e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1888]
Per Darren Hart I swapped in the real example and added some text
explaining what the user needs to do if their source is from a
tarball.
Reported-by: Darren Hart <darren.hart@intel.com>
(From yocto-docs rev: a1991f0b6f32a0a296ae4d115a834ed61042720b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to the addition of the BSP Tools section, I needed to add a bit
of front-matter to the start of the chapter indicating that we provide
information on how to create and manage a BSP Layer.
(From yocto-docs rev: 7ae34fa58aba6b17866a5379bdcdffd83491ff20)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the 'note' that says that the BSP Guide doesn't show how to
create a new BSP. With the addition of the Yocto BSP Tools section,
that's no longer true.
Also, the wiki page mentioned is out-of-date and probably shouldn't be
pointed to any longer for that reason.
(From yocto-docs rev: 972c2d2bc9f50f5f65b296b7396dc640710ad5b2)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have scrubbed the new section for the BSP Tools. Changes reflect
re-wordings, formatting, etc.
(From yocto-docs rev: c13d5a42665d256c6da6d663611291eef9617f1f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some documentation introducing and helping get people started with the
Yocto BSP Tools (yocto-bsp and yocto-kernel).
(From yocto-docs rev: 56a6db181f5cdf3c23daa021fe1e9ecb15843678)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed title pre Richard.
Reported-by: Richard Purdie <richard.purdie@intel.com>
(From yocto-docs rev: 2ec1368c4bdf5d61e3a7d60d3293ba878939321d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some edits to the text of this moved section.
(From yocto-docs rev: 69ba05bbdc8a6fb74efdfbb3214a562e564f5a68)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Per Richard Purdie's suggestion, I moved the discussion on using
BBMASK out from the "Customizing Images" section and placed it into
a section of its own titled "Excluding Packages from the Build."
(From yocto-docs rev: edb01b30779117f92e710b8afefa9a5d8a3e78fa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Placed the "Customizing Images" section in front of the
"Adding a Package" section.
Reported-by: Rudolf Streif <rstreif@linuxfoundation.org>
(From yocto-docs rev: 68a7ef421b9b66cc7f0a2180c1ef17c8c4ec2ed4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There needed to be an entry in all the manual history tables
that indicated this version of the manual is for 1.2 but is
WIP.
Reported-by: Rudolf Streif <rudolf.streif@linux.com>
(From yocto-docs rev: 6792b88af4f0171cfc84e4d77bda871d4af3d36c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hongna Xu realized that the whole Bitbake Commander part
is missing in the ADT manual. This should be Section 4.8. She
sent the info and I created a new section titled
"Customizing and Image Using a BitBake Commander Project and Hob".
Reported-by: Hongna Xu <hongnax.xu@intel.com>
(From yocto-docs rev: eb207806dbd2f73089068ef9e3fa447aa8a38404)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Old link to POKY_EXTRA_INSTALL. I changed to
CORE_IMAGE_EXTRA_INSTALL.
(From yocto-docs rev: 8c8308025443e2fd061faa03fe4f6245c58603a5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New variable added to the glossary. This variable replaces the
deprecated POKY_EXTRA_INSTALL.
(From yocto-docs rev: ad764fdd11440c6a46a783c7df38f8445189712f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Delete reference manual glossary entries of obviously dead/renamed
variables:
* PACKAGE_SUMMARY
* PACKAGE_DESCRIPTION
* POKY_EXTRA_INSTALL (renamed to CORE_IMAGE_EXTRA_INSTALL)
* POKYMODE (renamed to TCMODE)
* POKYLIBC (renamed to TCLIBC)
* SHELLCMDS
* TERMCMD
* TERMCMDRUN
In addition, fix some "link"s to not refer to any of the above.
(From yocto-docs rev: 146084b8b0bab5e5333b7da7d6eb1dc90e118eba)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Any shipped BSP needs this file for legal reasons, thus it's
non-optional.
(From yocto-docs rev: 4840f9a9d6b62f61378941c9a8712eb36720efd8)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The README section should not be optional, since at minumum it needs
to contain layer dependencies and maintainer info.
(From yocto-docs rev: 0bb2e8baf9ca7b4f1b8d8c08b4901d1f4312b270)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wording changed to remove example BSP layers that really weren't
layers (e.g. meta-intel). One of three patches from Tom.
Reported-by Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 84677e0ef26f48af9b45585224d6c4dee0406f5e)
Signed-off-by: Tom Zanussi <tom.zanussi>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From yocto-docs rev: 3f05eca756cb70adbaa639d2b677f88ae720ba4a)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The /build/tmp/stamps directory was incorrectly referred to as the
"STAMP" directory. Fixed it.
(From yocto-docs rev: e434b3d555f7bea0b4576c6cf0d638e3e3fe664c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Variable was incorrect in the manual.
(From yocto-docs rev: d1ddb06cdcec48ab64df3a03f3ef845da0b13c80)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 2ef9f6cc3cccff9d84709b3c3d9ce8e8c1daae41)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
One last clarification of what type of environment variable we
are talking about here.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 18c537d96bde8fac7f62071585b71aed05037410)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some instances in the manual where it was not clear on whether
the subject was a shell environment variable or a BitBake
environment variable. I cleared these up.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 123bb91a3954c98378cdd8bba0a35311eb53f37a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Another instance of possible confusion between a shell
environment variable and a BitBake environment variable.
I cleared this one up.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: e02596d940434806820f071218d2eb89c872cf3c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is confusion in the manual regarding shell environment
variables and BitBake environment variables. I fixed this
instance to specify shell environment variable.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f6cd520323e12124217975cff09d03a6f5e03936)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Addressed all issues specified by [YOCTO #2025] except for the
very first one that says bring the versions up to 1.2. This will
be accomplished by the poky.ent bump at release time.
Fixes [YOCTO #2025]
(From yocto-docs rev: 926e5635d8cd74fff7e00002108ce8c039252203)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information about Hob to the introduction part of this
chapter. The chapter is going to have a section that introduces
and speaks a bit about the Hob.
(From yocto-docs rev: dd98b3132ff4660397c37a223af8c4c2835a5276)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Grammar, style, and formatting edits applied to the "BSP
Licensing Considerations" section.
(From yocto-docs rev: 9809e0b5081bdc4f27d7d949930c409575a9a083)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied a couple small corrections to the re-write of the
"Enabling Commercially Licensed Recipes" section. These small
corrections were suggested and caught by Tom Zanussi.
Reported-by: Tom Zanussi <tom.zanussi@intel.com>
(From yocto-docs rev: ce9218386ec265f7eec2ec5916b09a6776b3077b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"The LICENSE_FLAGS mechanism can now be used to meet the special
license requirements needed by some BSPs. Update the documentation to
reflect the current BSP licensing mechanisms.
Also add a new blurb about the time-limited kernel."
- Tom Zanussi
I applied this patch verbatim and will check and clean up text
as needed.
(From yocto-docs rev: d05a7ddbc0d6017e5a8be2b3e0117f53e30a204b)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied and modified patch. Modifications included grammar, active
voice, formatting, links, section creation, etc.
(From yocto-docs rev: 76dc10138161124846c0752c251028ba16c45d7c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The git clone command did not work when the YOCTO_GIT_URL variable
was used. I removed the variable and hard-coded the command
into the example.
(From yocto-docs rev: 67f169a7e2540b27acfaf2fcdcc658ce189ec932)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The style for the note, caution, warning, and tip headings was a bit
over-bearing. Feedback from the community indicated that those words
needed to be in a smaller, less noticeable font. I created the style
so that the font's size is about half of what it was and I also changed
the color to match the other headings.
(From yocto-docs rev: f54c6274e1972c52ba17d7ebd2ba84bf6d59c105)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new "expert" section at the end of the QS. I reference the
section right up front. This new section is an attempt to divert the
expert user away from most of the QS. The information was formed from
Robert P. J. Day's wiki at his crashcourse.com site.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: b2981e9fcdd083e15194f520a4160938b02b1275)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented Richard Purdie's changes for the "Checksums (Signatures)
section. I also performed a spell-check on the chapter and found several
rogue words that I corrected.
Fixes [YOCTO #2024]
Reported-by: Richard Purdie <richard.purdie@intel.com>
(From yocto-docs rev: 3025ee64bc0f046abe87f95f1e8b9092a6079798)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a new glossary entry for the variable ALLOW_EMPTY.
(From yocto-docs rev: 35e3693c9f6b3f2842cfde55703a1fa1d1f27345)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added information that describes the relationship between
poky/documentation and yocto-docs/documentation. For developers,
they need to know to work from the yocto-docs Git repository
and not to rely on the poky/documentation Git repository, which
can lag behind the other one.
(From yocto-docs rev: 0cbc781d3e9544c9920fdaf4548d882dd79b3d6c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added more information to the YP Term "Append Files."
(From yocto-docs rev: e1a7e9b0a790d394e237a0972140107d11178408)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put in a link to reference another example of using a .bbappend
file.
(From yocto-docs rev: b5a5433506adfe46276584e51dc19fc153ea098d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed text that described how a config file was referenced.
(From yocto-docs rev: 29846fcb4fd6f90452023e1f627ef76f1a056ac6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to better describe what a .bbappend file is.
(From yocto-docs rev: 81527358615c229a9161568a30785221c9f081ff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>