Upstream is releasing development snapshots of the form
unifdef-2.11.23.1cca442.tar.gz so filter out versions which end is something
that looks like a git SHA.
(From OE-Core rev: dcf582f8f210c8e9d46f96950d48743819b87f9a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These plugins follow the GStreamer versioning, so inherit this class to ensure
we don't get notified about development releases.
(From OE-Core rev: cde7b38bcbd419799070da92013b4ea98468e643)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The native doesn't have to depend on udev, fixed:
$ bitbake btrfs-tools-native
ERROR: Nothing PROVIDES 'udev-native' (but virtual:native:btrfs-tools_4.8.5.bb DEPENDS on or otherwise requires it). Close matches:
[snip]
(From OE-Core rev: 48e0174aaf7201cb0ee0b15381638213171fa208)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of running autogen.sh (which runs autoconf et al) before running
autoreconf (which runs autoreconf et al...) just do the one task that we need
from autogen.sh: copying install-sh from automake's libdir.
(From OE-Core rev: 0e3a933c376b3bdb46bd3a2993932888ecfde434)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On buildhosts where default python has switched to using python3
qemu-native fails configure like this
| ERROR: Cannot use 'python', Python 2.6 or later is required.
| Note that Python 3 or later is not yet supported.
| Use --python=/path/to/python to specify a supported Python.
|
we still expect build host to have python2 pre-installed
and is always available.
(From OE-Core rev: 2cac9544752775262fa87517ed49fcac2fb3a574)
(From OE-Core rev: 42c32a9c8e3ca28e553a3b95089e0d51390c1758)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When DEPENDS=bzip2 becomes bzip2-native in libarchive-native,
the dependency ends up getting ignored because bzip2-native
is in ASSUME_PROVIDED.
But we need the library and thus have to depend on
bzip2-replacement-native, otherwise the build proceeds
without it despite the explicit --with-bz2lib.
(From OE-Core rev: 7ae1c93ab6df46dc88b0ffaa52778738849ff38d)
(From OE-Core rev: 76772f36c4ae8e416b471abe883f117977803aac)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[NVD] -- https://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2016-6131
The demangler in GNU Libiberty allows remote attackers to cause a denial
of service (infinite loop, stack overflow, and crash) via a cycle in the
references of remembered mangled types.
[BZ #71696] -- https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71696
2016-08-04 Marcel Böhme <boehme.marcel@gmail.com>
PR c++/71696
* cplus-dem.c: Prevent infinite recursion when there is a cycle
in the referencing of remembered mangled types.
(work_stuff): New stack to keep track of the remembered mangled
types that are currently being processed.
(push_processed_type): New method to push currently processed
remembered type onto the stack.
(pop_processed_type): New method to pop currently processed
remembered type from the stack.
(work_stuff_copy_to_from): Copy values of new variables.
(delete_non_B_K_work_stuff): Free stack memory.
(demangle_args): Push/Pop currently processed remembered type.
(do_type): Do not demangle a cyclic reference and push/pop
referenced remembered type.
cherry-picked from commit of
git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@239143 138bc75d-0d04-0410-961f-82ee72b054a4
(From OE-Core rev: 3c288b181a4cfecc80b48994f4dd2df285e4d1d0)
(From OE-Core rev: 96a16c4181d18b8580dad243350d589586cb2b07)
Signed-off-by: Yuanjie Huang <yuanjie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The command:
sed -i "s+${WORKDIR}+${STAGING_INCDIR}+g" tclConfig.sh
was used for replacing "${WORKDIR}", but it also replaced
"-L${WORKDIR}", but binconfig.bbclass would replace "-L${WORKDIR}", too,
which caused incorrect result, use "'${WORKDIR}" to fix the problem.
(From OE-Core rev: 2edfcbf0291c0d39be4a37348696329eba8a41f8)
(From OE-Core rev: 68960cbdf12de8aaff0f792091f839c987cc0aa0)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
They are required by nativesdk-cve-check-tool.
(From OE-Core rev: 7252c6f1b4b9a63e3bac79c6eba1b66ab85e21b9)
(From OE-Core rev: 84f254cb8c75fbd368041b7637effe42a05b2203)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python-six-native depends on it.
(From OE-Core rev: 475585ed84bf8dac339f97f811582bf782972930)
(From OE-Core rev: 6334ffac9996e48fd5898fdee1db5e7eed6370e2)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 0027c8078fc3d98c7ecaab03d4e637b1fa07778e)
(From OE-Core rev: a0d5816ba410e393fa03f5644008625944c1d719)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 56cdb1358f4560fce4d8fcd04d754051a4ac6250)
(From OE-Core rev: 0599ef1774e6311c0927ef63e0967652fa87410f)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tested by building gnuradio stack.
(From OE-Core rev: d3e5a6d38870ecede87812cb81c0b5630bd3b3ff)
(From OE-Core rev: 66122e4f19e880f5e48130b318f98452b992cad4)
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The license text in Weston sources was changed from "MIT X11" to "MIT
Expat" in the 1.9.0 release. The new text is 3 lines longer than the
previous version, so endline and md5 hash have been incorrect for the
oe-core weston recipes from 1.9.0 onwards.
https://cgit.freedesktop.org/wayland/weston/diff/src/compositor.c?id=a0bbfea64b04d3cf12327d8b488b9949a4cddc99
(From OE-Core rev: 558888275288313d774812d7ab268d9850c82881)
(From OE-Core rev: 05fcf1332264a345edce3bae5f65eaf2d0df07b5)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove backported patches. Add runtime dependency for netserver
(as socketserver was recently moved there) and depend on
libxkbcommon (this is really only needed for wayland support
which could be made configurable).
(From OE-Core rev: 5a3fa55f397bb89f75fb714b1d93aa76125cc09a)
(From OE-Core rev: 87f10ec9ed63794ffd216c752cf14fd68d009d46)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Layout updates from the last 16 months.
(From OE-Core rev: 22ae7375bb03531349060f11a4f2bfc99d851e52)
(From OE-Core rev: 452160980af60807c8ed51eabd291b4bf3ce8348)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Small release with mostly build system fixes.
(From OE-Core rev: 638af9cff97cf3ead79226b616e29f9135cbf53d)
(From OE-Core rev: 549669a7bace51fd9e44b4629cb4ce7c65e98ffe)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tiny release to fix build with new xmlto.
(From OE-Core rev: ef523527b68eef0ce1fdacac87b4eee27677589b)
(From OE-Core rev: 8a52a4a64727f573fa11951ee0d387cc977a8b25)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New release requires libpcre 2.
Enable gnutls by default to remove an annoying warning on every
vte widget. core-image-sato already has gnutls so this shouldn't
be a big deal.
(From OE-Core rev: c9b65168a6e5ca329c013d5932567eb6cca770f3)
(From OE-Core rev: 03f707ba1134b9706aed85665dc5f61aebbd5fb7)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
here is shortlog
* d6601f0a avoid unbounded strlen in gettext functions
* dbbb3734 fix use of uninitialized pointer in gettext core
* 01e6bbec fix bindtextdomain logic error deactivating other domains
* 6894f847 fix spurious EINTR errors from multithreaded set*id, etc.
* 1f53e7d0 fix crashes in x32 __tls_get_addr
* 27b3fd68 fix crash from corrupted tls module list after failed dlopen
* 809ff8cf treat base 1 as an error in strtol-family functions
* 786fda87 fix getopt[_long] clobbering of optopt on success
* 150747b4 reduce impact of REG_* namespace pollution in x86[_64] signal.h
(From OE-Core rev: 6f42e7be18e0896aac357ce2aedaa3b32b2ad98e)
(From OE-Core rev: 72146e579e2df3b1132776a81b47e842dc262229)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are two major versions of the PCRE library. The newest version, PCRE2,
was released in 2015 and is at version 10.22.
The original, very widely deployed PCRE library, originally released in 1997,
is at version 8.40, and the API and feature set are stable, future releases
will be for bugfixes only. All new future features will be to PCRE2, not the
original PCRE 8.x series.
The newer vte depends on libpcre2, so add it.
(From OE-Core rev: f7165d379cb67c4d4918a8a3e9509d3d823d61da)
(From OE-Core rev: 69c4d94dd6b825c710c6e76fe77e5255ddd1183d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that Tremor isn't enabled by default in oe-core's GStreamer plugins and has
been added to meta-multimedia, it can be removed from oe-core.
(From OE-Core rev: 30f5c80943f69884b3d7323b540c8bb0f1efd8fd)
(From OE-Core rev: a8b476e7d6a5bf43cceb8c7b2610c9b66fe2f33e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered that we were not running autoreconf (and cannot due to the
unconvential file structure upstream), so manually run autoconf and move the
generated configure to the right place as we do already for gnu-configize.
Update no-x.patch (now that it is actually being used) so that it doesn't break
the build.
Patch out the use of INST_LIB_DIR in slsh/Makefile.in as this is the *target*
path, so is inappropriate to link to. This means we can remove the custom
do_install() which was working around the problem.
Remove all rpath patches (now overwritten by autoconf) and replace
with just passing RPATH='' via oe_runmake.
Remove the library search path patches (now overwritten by autoconf) and replace
with passing explicit pointers to the sysroot in the options.
[ YOCTO #10969 ]
(From OE-Core rev: 48fe39b09fbac973ba188938ab2a080f71ee8d68)
(From OE-Core rev: 3506898dbd62bb028349b83e1538a7ea665c3d1c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default these pull in binutils-cross since they're a cross tool
and pull in any native tool requirements. In reality they don't
need such tools at build time or runtime since they're scripts.
Therefore clear the dependency and save on some processing time.
(From OE-Core rev: 63796765122e2eee2b78930797d571acb5c244d1)
(From OE-Core rev: 50feffd0917b0ab408b34ded9c2f741a9c4e5b74)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its sad we need to do this but do_install and do_populate_sysroot appear
to change the files in ${B} and this breaks if something works in parallel
like gcc_stash_builddir. We've seen a few too many race errors on the
autobuilder which appear to be from this so make things run in sequence
deterministically for now.
An example failure was this from do_populate_sysroot whilst stash_builddir was running
in parallel:
ERROR: gcc-cross-initial-arm-6.3.0-r0 do_populate_sysroot: split_and_strip_files: 'file
/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-arm-lsb/build/build/tmp/work/x86_64-linux/
gcc-cross-initial-arm/6.3.0-r0/sysroot-destdir/home/pokybuild/yocto-autobuilder/yocto-worker/
nightly-arm-lsb/build/build/tmp/work/x86_64-linux/gcc-cross-initial-arm/6.3.0-r0/recipe-sysroot-native/
usr/bin/arm-poky-linux-gnueabi.gcc-cross-initial-arm/arm-poky-linux-gnueabi-gcov' failed
Exception: subprocess.CalledProcessError: Command '('patchelf-uninative', '--set-interpreter',
'/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-arm-lsb/build/build/tmp/sysroots-uninative/
x86_64-linux/lib/ld-linux-x86-64.so.2', '/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-arm-lsb/
build/build/tmp/work/x86_64-linux/gcc-cross-initial-arm/6.3.0-r0/sstate-build-populate_sysroot/
recipe-sysroot-native/usr/bin/arm-poky-linux-gnueabi.gcc-cross-initial-arm/arm-poky-linux-gnueabi-gcov')' returned non-zero exit status 1
Subprocess output:
missing section headers
(From OE-Core rev: 75b76eb08c7e344142f0326605aeb6b24e61e38e)
(From OE-Core rev: 7265e99d0b4b662ca7f23d480f2845a309ac57fc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The command was:
s += " -e 's:-L${libdir}:-LOELIBDIR:;'"
s += " -e 's:-I${includedir}:-IOEINCDIR:;'"
s += " -e 's:OELIBDIR:${STAGING_LIBDIR}:;'"
s += " -e 's:OEINCDIR:${STAGING_INCDIR}:;'"
s += " -e 's:-I${WORKDIR}:-I${STAGING_INCDIR}:'"
s += " -e 's:-L${WORKDIR}:-L${STAGING_LIBDIR}:'"
The STAGING_LIBDIR and STAGING_INCDIR now contains WORKDIR, so the
result would be incorrect like:
TCL_INCLUDE_SPEC='-IFIXMESTAGINGDIRTARGET/usr/include/recipe-sysroot/usr/include/tcl8.6'
Note, the "/usr/include/recipe-sysroot" is not needed. Move the last two
sed commands ahead will fix the problem.
(From OE-Core rev: 42e4e36de37b8e06a2ff56172d04d3ffeccfbfae)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows a native package's recipe-sysroot-native to be populated with
that packages native image files. This in turns allows it to be used by
scripts or other tools without creating un-necessary DEPENDS.
An example of this is systemtap-native and the crosstap script.
(From OE-Core rev: 7f6b4359e1f2d9d748d23305a2af73c0efba5928)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
run.do_deploy.27809: line 155: depmodwrapper: command not found
(From OE-Core rev: 96b7eceefb3e99848d1c16d7c5da123056dcdc24)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
upgrade.py imports oe.recipeutils in meta/lib/ but path to oe.recipeutils
is not provided. This fails populate_sdk_ext.
(From OE-Core rev: 5f140359f859fea9cfe8c8d9c9584bceec875adb)
Signed-off-by: Luck Hoang <huyht1205@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So that we can easily reproduce configure by:
$ $CACHED_CONFIGUREVARS ./configure $CONFIGUREOPTS $EXTRA_OECONF
[YOCTO #9423]
(From OE-Core rev: a851f57de63fe527e04f2296245e9720c40f9c2e)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a typo in the useradd-staticids.bbclass that
causes error during do_install.
If build was configured to use usedadd-staticids and
the recipe included (for example):
USERADD_PARAM_${PN} = "--expiredate '' testUser"
Due to the typo this added the wrong option '--expiredata '
that caused an error.
(From OE-Core rev: 9d26a2f9f52ae9df6aa5e0ee20683ada35c32af1)
Signed-off-by: Peter Bergin <peter@berginkonsult.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
TUNE_FEATURES is include in BUILDCFG_VARS, so any whitespace is
visible to the user during the build process. Remove the extra
whitespace added during the 2.1 development cycle:
http://git.openembedded.org/openembedded-core/commit/?id=f774b44fa007a2a756ada892ede832b1251d940c
For consistency, squash whitespace within PACKAGE_EXTRA_ARCHS strings
too.
Whitespace within TUNE_FEATURES strings in the tune-cortexa*.inc
files has been fixed in a separate commit:
http://git.openembedded.org/openembedded-core/commit/?id=5610c6397ee098dd998b7417b343494de77179f9
(From OE-Core rev: 3cd0c5ef748ad072f1bd9a8d42157e9643bf97eb)
(From OE-Core rev: 971e43270173afb08f21ffac16a4157f7e611b81)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Incorrect data was printed (recipe name instead of epoch number) when
displaying changes in epoch.
(From OE-Core rev: 5e2b1bfb684dc76963f692172f7457c2249c3266)
(From OE-Core rev: d3f4ec2ad5e83f52f7d3824cfe1f5a64f2d81bcf)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add .xz to the list of extensions recognized by patch_path(), so that
compressed patches ending in .patch.xz or .diff.xz are automatically
applied.
(From OE-Core rev: f1a2c45765d14d3ca09657ad1f6b526554af2bb6)
(From OE-Core rev: f50fd7f247d5bb05bc7d1109c574a682067688da)
Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use cdn.kernel.org to distribute the server load and improve download speeds.
Leave www.kernel.org in MIRRORS as a fallback.
See https://www.kernel.org/introducing-fastly-cdn.html
(From OE-Core rev: 7c81b680a3cc4602c9c153398103d5477d7fd894)
(From OE-Core rev: 4f09ec0e7b51cc599d6a46d41f77d6fb07a6d445)
Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The idea on getTarget is to use kwargs to send custom variables
to different targets, instead of this, a new variable was added
(just used for custom targets) and this broke testexport. So
in order to fix it, just add the custom variable to kwargs.
This fixes the use of getTarget() in testexport class that was
introduced in 1dc8010afd71fe46fb28bb86fb7c07a5fbd3d7cf.
(From OE-Core rev: cf138029a1f18f991fc7a28c81d85884942e9d56)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The word 'uninstall' was spelled incorrectly in various parts of
oeqa files.
(From OE-Core rev: af365e025030436f83b233fa51ecc9c58c58ce3c)
(From OE-Core rev: 9d25188e873645b849584b51a77b86588a51d4ba)
Signed-off-by: Humberto Ibarra <humberto.ibarra.lopez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Variable WKS_SEARCH_PATH was not fully expanded when used directly
in this expression:
WKS_FULL_PATH = "${@wks_search('${WKS_FILES}'.split(), '${WKS_SEARCH_PATH}') or ''}"
This caused expansion error: bb.data_smart.ExpansionError:
Failure expanding variable WKS_FULL_PATH, .... which triggered exception
SyntaxError: invalid syntax (WKS_FULL_PATH, line 1)
Calling d.getVar instead of directly referencing variables
should fix the issue.
(From OE-Core rev: 20f8fddd28fe46d7e694804de3d894cdf9f7c636)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since 59a99cd8 "oeqa/sdk: Updates sanity tests for minimal eSDK"
we can now run oe-selftests against a minimal eSDK.
We need to increase the layer version so that we can detect this
change in behaviour in our automated testing.
(From OE-Core rev: def3800c7e58d9d1b54ea1df27b190a0f6d1d544)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton
Robert Yang
Khem Raj
Edwin Plauchu
Patrick Ohly
Chen Qi
Yuanjie Huang
Robert P. J. Day
Philip Balister
Andre McCurdy
Stephen Arnold
Jussi Kukkonen
Richard Purdie
Saul Wold
Luck Hoang
Peter Bergin
Markus Lehtonen
Dominic Sacré
Mariano Lopez
Humberto Ibarra
Ed Bartosh
Joshua Lock