gcc 4.8 fortran presents some challenges:
* libquadmath headers need to be in the libexec include dir. It turns out
to be easiest just to manually do this.
* libgfortran configure needs libquadmath to be compiled. This means
a separate recipe is needed (the alternative is gross hacks)
* the libtool uses to link libgfortran doesn't have our improved rpath
handling and puts bogus RPATHS into the libraries. We can avoid this
by tweaking libtool with sed.
This patch resolves those issues. Any user of fortran does need to DEPEND
on libgfortran in order to trigger it to build but this shouldn't be a major
issue.
(From OE-Core rev: a5e7ee5770b9e0cf719c573efffd874440f74289)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the contains function results in more optimal sstate checksums
resulting in better cache reuse as we as more consistent code.
(From OE-Core rev: 9c93526756e7cbbff027c88eb972f877bcb1f057)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using make -j with the 'install' target, it's possible for altbininstall
(which normally creates BINDIR) and libainstall (which doesn't, though it
installs python-config there) to race, resulting in a failure due to
attempting to install python-config into a nonexistent BINDIR. Ensure it also
exists in the libainstall target.
(From OE-Core rev: 54da47f3ddc1c009594744793060ffd09db3ad11)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If sysroot contains '-D' or '-I' characters, the SVN_NEON_INCLUDES and
the corresponding CFLAGS will not get the correct value.
This will cause build failures.
This patch fixes the above problem.
[YOCTO #5458]
(From OE-Core rev: 7078397ef39de43244fca7e24683b2a83913cbbf)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting DESCRIPTION to the same value as SUMMARY doesn't do anything,
since the value of DESCRIPTION will be derived from SUMMARY if not
specified.
(From OE-Core rev: e1e888585c84175580ad822d4a6c93f62e5ce16c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also tidy up value a little bit.
(From OE-Core rev: a8e7efe23a5962610fb5818a9a802e737fca918f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop FILESPATHPKG setting since it seems to be superfluous.
(From OE-Core rev: 694d95c94d03fb1e63d6c52840a5149c3b166c2a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python recipe did a sed s/ccache/$(CCACHE) on the Makefile, which
replaces all "ccache" including ones that consist of a full path.
This leads to build error when building in a project path with
"ccache" in its name. Fix it by only replacing "ccache " with
"$(CCACHE) ".
(From OE-Core rev: 1181112cf65bc0186807fc59399c5dddcb9f9449)
Signed-off-by: Lei Liu <lei.liu2@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When fortran was enabled, builds were failing due to a extra files.
For now we can remove these and avoid the build failure.
(From OE-Core rev: 2e60ef7fe63974e443a9ddc25c5eb4249ec37963)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the transition from svn -> tarball release, this issue was
missed. Instead of using autogen.sh, we can call configure
directly.
[YOCTO #5606]
(From OE-Core rev: 776e3b19160e5e1cceec1a8941c831be4d1f82b0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc has cross and target components with a shared workdir. The unpack umask
settings need to match for all of these. We need to use strings in each
case to ensure the sstate code matches them correctly.
This patch tweaks various things to ensure the change adding the unpack umask
change doesn't break the compiler builds.
(From OE-Core rev: 67162438ee9c402b23c32853af9d313949eb6e4a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"grep -q" does not write anything to standard output, the result is same as
a empty string, The second test becomes [!""] which is a fixed true value
(From OE-Core rev: 79b0979ecd33ce15563354c90d8bcc857ddf95ad)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 5b3c4863665eabf7750ff1bdd975ea1f4772006b)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Explicitly set libdir in EXTRA_OECONF so that the correct library folder is generated in a multilib build.
The version string (VER) has been changed to 8.6.1 and the library paths have been updated accordingly so that the related tk recipe can correctly detect tcl (this search is done using the tclConfig.sh script which contains the tcl version number).
(From OE-Core rev: e840f526e7223c9d393aab818c7a5a446b89c503)
Signed-off-by: Nick D'Ademo <nickdademo@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
no user uses these two patches
(From OE-Core rev: 47e7b47def5b06a1d825bf0883409510cb4da36f)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use PACKAGECONFIG to explicitly address vnc, libcurl, nss, uuid, curses, gtk+,
libcap-ng dependencies rather than tested by configure.
It avoided potential errors while multiple builds shared a common state_cache.
(From OE-Core rev: 4482af07df26644885bae49b98f5d765a5caa68c)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
syslinux is compling something with host gcc at do_install
stage, which leads to some unexpected errors with old gcc
on host. Using our cross toolchain instead.
(From OE-Core rev: b0da7ccde5380726acfccf1a96cdf5560edf9159)
Signed-off-by: Lei Liu <lei.liu2@windriver.com>
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The symlink from 'opkg' to 'opkg-cl' doesn't need to be created with
update-alternatives as there isn't any alternative. Instead it can be created by
hand in do_install_append.
(From OE-Core rev: c28bb9126eed92c13a50a2557eb48402a9d12537)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of hardcoding EXTRA_OECONF to disable things, we add PACKAGECONFIG
options for gpg, curl, ssl-curl, openssl, sha256 and pathfinder. By default all
these options are disabled.
(From OE-Core rev: 7d227c5764d71f21432a6a56dc4616c5b917c42c)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change adds -f when doing rm on config.status. .config.status is
not always present when doing do_configure, and that would without this
change lead to a fatal error.
(From OE-Core rev: b16d312ce03ae68da46ead3fc855b5879b2013fd)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libjson is now known as json-c. Config.status is removed as it breaks
seperate build dir builds. Built without parallel make as it fails,
official word is not to bother trying.
(From OE-Core rev: 533c1db22eddaaaea7d58d1fc75d608b9ba8122a)
Signed-off-by: Jack Mitchell <jmitchell@cbnl.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
btrfs-tools has had numerous bugfix and recently fixed the issue that do_rootfs
was failing, there is no offical release, they just roll the head.
Removed 2 parallel make patches that we resolved slightly differently upstream
[YOCTO #5146]
(From OE-Core rev: 9ae204660814a8dc50b67d6c35b872dfa78c17e1)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't make use of xen and when building on Ubuntu 13.04 when
libxen-dev is installed on the build host you will get errors like the
following:
| /usr/include/x86_64-linux-gnu/bits/string3.h:81: warning: memset used with constant zero length parameter; this could be due to transposed parameters
| /usr/lib/gcc/x86_64-linux-gnu/4.7/../../../../lib/libxenguest.so: undefined reference to `lzma_alone_decoder@XZ_5.0'
| /usr/lib/gcc/x86_64-linux-gnu/4.7/../../../../lib/libxenguest.so: undefined reference to `lzma_code@XZ_5.0'
| /usr/lib/gcc/x86_64-linux-gnu/4.7/../../../../lib/libxenguest.so: undefined reference to `lzma_stream_decoder@XZ_5.0'
| /usr/lib/gcc/x86_64-linux-gnu/4.7/../../../../lib/libxenguest.so: undefined reference to `lzma_end@XZ_5.0'
This change disables xen for both -native and target packages but
since it is a PACKAGECONFIG a user could tune this to have xen support
in the target package.
(From OE-Core rev: fd638b975aac826d7137fd11db94b64ba82de592)
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Flex needs m4 to run (see below) and, since the create_wrapper
introduces a bash dependency on target, give the path to m4 binary in
the configure command line.
Snippet from the flex documentation:
"The macro processor m4 must be installed wherever flex is installed.
<...>
m4 is only required at the time you run flex."
[YOCTO #5329]
(From OE-Core rev: 64030f37b34f75144f53eef42d5822ede79e08bd)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This helps in compiling other programs like expect which
depend on private headers but 8.5, 8.6 and so on is enough
granularity and currently we had 8.6.x and so on which
means that expect recipe will need to be touched whenever there
is minor update of tcl.
Additionally the encode creating symlink to shared object in
patch and remove it from recipe
Refresh patches after making changes to Configure.in we
propertly generate configure and not patch is directly as
was the case.
(From OE-Core rev: 67f44193135c789e478410347ff58ed110ed9484)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The run-ptest contained in python uses a Makefile. The path of the
Makefile is changed to ${libdir}/python/ptest in do_install_ptest.
However, the directory is wrong when the project is configured with
"--enable-multilib=lib32"
In addition, do_install_ptest is defined before "inherit ptest", so
it is overriden by the one in ptest.bbclass. do_install_ptest is
moved down.
(From OE-Core rev: 0eb947454e1c92467283e6f1adeca67c7c57698b)
Signed-off-by: Zhangle Yang <zhangle.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When ptest is not enabled, the populate_packages_prepend function runs
wheter ptest is enabled or not. This causes ptest packages to get in the
dependencies list when ptest is not enabled.
(From OE-Core rev: 826f4e4057a221127ac4c1d0658d975032fc7d90)
Signed-off-by: Jeffrey C Honig <jeffrey.honig@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_configure() in binutils.inc includes an explicit call to
gnu-configize so we need to make sure that gnu-config-native is
present. Previously this was being dragged in with the rest of the
autotools stuff, but commit 54a3e2ee37003fc56af0339f857b0b6442790c26
disabled that for binutils-cross on the grounds that "we don't
autoreconf" the toolchain components. Fix this by adding
gnu-config-native itself explicitly to DEPENDS.
(From OE-Core rev: 616354f13732d13c17434d5b60b166f691c25761)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recipe only provides native packge, the RDEPENDS is not necessary.
Remove it and also two unnecessary comment lines.
(From OE-Core rev: 915c1a35ed3ac7eb650d68c079d6b7cda781b106)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tests/f_extent_oobounds runs debugfs from the system, not from the
source tree, and if the system's debugfs doesn't have the extent_open
command it fails silently.
Use $DEBUGFS and $MKE2FS to get the in-tree executables for this test,
just like other test scripts do.
(Build machines which run make check shouldn't need to have e2fsprogs
installed, and we should be testing just-built versions of the tools
anyway)
This patch is from:
http://www.spinics.net/lists/linux-ext4/msg38880.html
Eric Sandeen had sent it to the linux-ext4 mailing list, but haven't
been merge by now.
[YOCTO #5511]
(From OE-Core rev: 22465cef87b4b1685b3b131751eaf528503b264c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To avoid a implicit build result.
(From OE-Core rev: 3e302e94ba5bcbba2736f37c0f67cfaf7fa45c0c)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patch cleans up and fixes dependencies of 'vala' in the following way:
* remove deps on 'gtk+' + 'dbus'; these packages are not required and
'gkt+' is high barrier preventing using 'vala' on headless systems
* 'bison-native' is required both on native and target builds; 'DEPENDS'
and 'DEPENDS_virtclass-native' and 'DEPENDS' can be merged hence
* 'flex-native' is required
* although 'xsltproc' (from libxslt-native) is optional, a dependency
on it was added to make builds deterministic. An alternative method
might be 'EXTRA_OECONF += "ac_cv_path_XSLTPROC=:"' but this is error
prone as it depends on internals of the build system.
(From OE-Core rev: 8834e6b2aa70a2b3d43550d3912e16b8f5c12d7e)
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
MIPS gcc is not configured with multiarch enabled. This causes
compiler generates local label with $ prefix, which is specified
in default o32 abi. It is not recognized as local symbol by n64
assembler, so we get a lot of unexpected external symbols. We
should configure MIPS gcc with --enable-targets=all, as for other
archs.
(From OE-Core rev: c210393b3e0c54606493e311d7c2040efebc4dcd)
Signed-off-by: Lei Liu <lei.liu2@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #5283]
eu-objdump does not work on mips, arm and ppc, so remove it from these
unsupported architectures
(From OE-Core rev: abf01e2f36943b5a5c5d2d827186054a51902130)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mklibs requires the "dpkg-architecture" utility to work.
Add dependency on dpkg-native.
(From OE-Core rev: 9811641e95dd7e1514eb41900e033a0548bd13d8)
Signed-off-by: Lei Liu <lei.liu2@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is only built for PPC and not needed, so remove it to fix the QA Issue
ERROR: QA Issue: binutils: Files/directories were installed but not shipped
/usr/bin/embedspu
(From OE-Core rev: 98c2b40b64785db99b4f02765212ff40301d3034)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes below issues:
1. In makedevs.c file, it lost related functions definition about "-q" and
"--squash" options. So we should remove help information of these options
from makedevs.c to fix this issue.
2. Previously, It returned nothing when makedevs command be executed with
none or invalid option. We hope to print help information and return non-zero
value.
3. If use '-d' option to pick non-existent dir, error messages should be returned.
(From OE-Core rev: 24089364c3d11665c9ac3210c1fa2488017b6b73)
Signed-off-by: Lu Chong <Chong.Lu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -symlinks package doesn't really add any value if we're
using update-alternatives. Drop it, leaving a spare RPROVIDES
in case anyone thought they needed it.
(From OE-Core rev: 24093e26f246f222c385dc37a2f8cf8b0f183175)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ar and strings utilities are provided as alternatives, but
the rest of binutils is being done with binutils-symlinks. This
has the side effect that if you want "as", and you install
binutils-symlinks to get it, you don't get "ar" from it, because
it's not in the symlinks package.
Solution: Use the same mechanisms for everything, putting
everything in ALTERNATIVES, so installing binutils on a target
produces the expected behavior of having the various utilities in place.
(We do this only for class-target, though.)
Issues: The "embedspu" and "ld.gold" binaries may or may not exist,
but the determination of whether to list them as alternatives is
being made before the point at which we can easily check for them,
so that can produce warnings.
(From OE-Core rev: 1395aefcaeac94dd0e6ed3a718b7e58dd43b355e)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Drop redundant DESCRIPTION (same as SUMMARY)
* Set SUMMARY to slightly more descriptive value borrowed from Fedora
* Fix HOMEPAGE URL (repeated http://)
(From OE-Core rev: 0346375152761b2aaa897a546ae9ba2d386d5267)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refreshed no-static-link.patch to work with this release and changed the
lines/checksum (and the file) where the license can be found.
(From OE-Core rev: beaa98867954898f75c8a0987218a2caffb8daba)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This update also drops the following patches which appear to have
been resolved upstream:
- ftd_header.patch
- target-i386-Fix-aflag-logic-for-CODE64-and-the-0x67-.patch
- target-ppc_fix_bit_extraction.patch
Qemu no longer uses the i386.ld and x86_64.ld linker scripts
and the .interp section should now have a 0x1000 size with the
proper path. Therefore, for nativesdk-qemu, the following
patch should no longer be required and is also dropped:
- relocatable_sdk.patch
(From OE-Core rev: 8e22b08de2745e08421b38f8ba215bcc1de4b423)
Signed-off-by: Chris Patterson <cjp256@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Take $D into consideration and make postinst run successfully at
rootfs time.
(From OE-Core rev: 0636093711547957a8f5b25322bd3e0da367cfc4)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the last patch we missed similar update for test/line2addr.c
which meant that the build still failed.
(From OE-Core rev: cb966afe86a5856d846fb0d4fb627cdce2ae0670)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this patch filenames containing spaces do not get into the final
ext2/3/4 filsystem.
[YOCTO #5401]
(From OE-Core rev: 1350b461ed0c9d4afa1ab909a5b1ff60fb160c97)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PowerPC toolchains can use the OS "linux" or "linux-gnuspe". This
patch links them together so the one cross-canadian toolchain can support
both.
GCC_FOR_TARGET is set for the GCC recipe as otherwise configure
can pick up an incorrect value.
[YOCTO #5354]
(From OE-Core rev: a1d6331238982b0c5d39b0a18794f6654b00d46a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in
commit fe039170236080291c0220476a5809774f82ee5c
Author: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Date: Wed Oct 2 10:55:32 2013 +0000
systemd-compat-units: Use correct run-postinsts script link
OE-Core commit 75a14923da has moved
run-postinsts script execution from S98 to S99 in rcS.d. run-postinsts.service
should check for this script and run it on first boot rather than
S98run-postinsts, which is for opkg/dpkg.
the link was corrected but the mentioned commit is not available. Instead of
reverting, we use the same variable as opkg for init script ordering and drop
a note in case somebody wants to change default.
(From OE-Core rev: 7aabc9408fb382f0ae39f9932b6d9ac391528b76)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove all PR = "r0" from all .bb files in oe-core. This was done
with the command sed -e '/^PR.*=.*r0\"/d' recipes*/*/*.bb -i
We've switching to the PR server, PR bumps are no longer needed and
this saves people either accidentally bumping them or forgetting to
remove the lines (r0 is the default anyway).
(From OE-Core rev: 58ae94f1b06d0e6234413dbf9869bde85f154c85)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In some cases, it's unfit to use "+=" in a conditional appending, we would
end up with the variable being set rather than being appended, which is not
it mean to.
(From OE-Core rev: 7eae843aaa4eaa534a2b825949563ca11bd3680c)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While ELF_C_RDWR_MMAP was used, elf_begin invoked mmap() to map file
into memory. While the file's bss Offset has a large number, elf_update
caculated file size by __elf64_updatenull_wrlock and the size was
enlarged.
In this situation, elf_update invoked ftruncate to enlarge the file,
and memory size (elf->maximum_size) also was incorrectly updated.
There was segment fault in elf_end which invoked munmap with the
length is the enlarged file size, not the mmap's length.
Before the above operations, invoke elf_begin/elf_update/elf_end
with ELF_C_RDWR and ELF_F_LAYOUT set to enlarge the above file, it
could make sure the file is safe for the following elf operations.
[YOCTO #5356]
https://bugzilla.redhat.com/show_bug.cgi?id=1019707https://bugzilla.redhat.com/show_bug.cgi?id=1020842
(From OE-Core rev: 35c8b1ac7c3b1e4209b1e30d1dbd1a457286b97b)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In a recent commit, the FILES expression for rpm accidently moved a
large portion of rpm-build into rpm:
http://git.yoctoproject.org/cgit.cgi/poky/commit/?id=2e557556e03f4e86795cf331ccf06acd4c373045
Since rpm-build requires perl, this caused a number of build failures
when the rpm-build package was attempted to be used since it references
/usr/bin/perl. This commit restores the previous contents of the rpm
package.
(From OE-Core rev: a72ca9b8068f71cfed8b7cbe0f08247bd3f0fbe7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libpseudo.so is always installed into ${prefix}/lib/, not ${libdir},
so fix these paths; and skip libdir WARN_QA checking to ignore the
warning in 64bit and multilib enabled system
(From OE-Core rev: 47c7850c025994685aa1811057f4f9a5f0f2a3ae)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified FILES-paths since nativesdk can't handle hardcoded paths,
Also added *.real binaries to packaging since this is not done when built
as native.
As far as /var having to be hardcoded, I have a hard time seeing someone
modifying bitbake.conf to place localstatedir somewhere else than /var.
If there exists a target/nativesdk portable way of hardcoding FILES,
please let me know, and we'll do it that way.
Cleanup of FEATURES, since it was the same for native & target.
(From OE-Core rev: 39383e9bf1aa5e29d33d8af7f8e690d2238fd14f)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Refreshed remove-gets.patch to apply correctly and changed license
checksum since some years were added to the license file.
(From OE-Core rev: b7505d7c279888bd1675c1a8387edcf87cae8aac)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The license line moved to another line.
(From OE-Core rev: 8712d24a6f3d687786eca770b7072bbc38ff88aa)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use trim_version to get version part of the executable name.
(From OE-Core rev: af0f93059510fb4ccbe7b1497bda8dd8370245a5)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
when x11 is not defined in DISTRO_FEATURES, there are no x11 headers
so True is not defined leading to :
| ui/sdl.c:62:8: warning: type defaults to 'int' in declaration of 'doing_grabs' [-Wimplicit-int]
| static doing_grabs = True;
| ^
| ui/sdl.c:62:22: error: 'True' undeclared here (not in a function)
| static doing_grabs = True;
| ^
(From OE-Core rev: d3d5ccd3275196fb9e4cb8f49d3c087b97c20ed6)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At the start of install, python swizzles the makefiles around, leading
to chunks of do_compile running again. These race against the install
target, leading to errors if pieces are being recompiled whilst others
are being installed.
For now, workaround this by running the compile target with the new
makefile, then running install ensuring a parallel make race doesn't
happen.
(From OE-Core rev: 72938a8631cfe5be5ac88ad67f2db595e2487e86)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some packages may return error while running opkg-cl configure, during
first boot. This will fail 'ExecStart' and 'ExecStartPost' will not run.
Without 'ExecStartPost' opkg-configure service will continue to run on
successive boot attempts. 'ExecStartPost' should disable this service
after first boot irrespective of 'ExecStart' status.
(From OE-Core rev: cd6041071ddf76693cda7632379ceddd1d21a7fb)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The cross-canadian compilers are now build once per architecture but were being
installed into tune specific locations which is incorrect. This adjusts things
so they are make TARGET_ARCH specific. We gain the tune specific parts from the
target sysroot which remains tune specific, the compiler and tools are independent
ot that.
binutils/gcc require sysroot options but since we reset at runtime, these shouldn't
have dependencies in the sstate checksums. They are therefore also excluded.
With these patches, switching machines does not result in a rebuild of *-cross-canadian
and the compiler is correctly located and referenced in the target images.
(From OE-Core rev: f58acab6414fe96d9e07ebbe86b348d2ac2bed5f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only care about the end result in this case, not the specific inputs
that went into determining the gcc option. This change updates the code
to reflect that.
(From OE-Core rev: 83055511dab1e2aeefe84262ebe52595848c844b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ensures that makedevs will not cause image creation failures
when it encounters a pipe (fifo) that exists from a previous image.
This handles mode changes and it will correctly fail for dangling
symlinks.
[YOCTO #5288]
(From OE-Core rev: 3a4b0e7973bef43f16058137e64600e2f890b117)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dpkg uses xz as a compressor and the binary image is needed on the system for
dpkg to work correctly.
[YOCTO #1881]
(From OE-Core rev: 8f6bc04c9b563f8659ce0e053072deca02da38a5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a potential issue with the fastop code in pseudo since a process may
exit and allow some other function to run before the server has processed
the commands run by the process. Issues have been see with unpredictable
file permissions.
To avoid this, we ping the server before exitting which guarantees it has
processed the current command queue.
The patch was written by peter.seebach@windriver.com
[YOCTO #5132]
(From OE-Core rev: a8a1f12c51ffdca011db194894fd7d14c119fb09)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a bug in handling of the mxcsr register since cpu flags
were not getting updated after fxrstor operations. This small tweak
fixes that.
[YOCTO #5248]
(From OE-Core rev: 5dc43cdc08e6698afa16ba79f3506a1555bb3710)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently opkg uses a script to configure packages during first time boot.
This script is present in rcS.d and when 'sysvinit' is disabled this
script doesn't execute. For systemd only distros this newly added service
will run the opkg configure during first boot only.
(From OE-Core rev: fdcfcea5b8eae1769a217f8efea9c02f037f63fa)
Signed-off-by: Muhammad Shakeel <muhammad_shakeel@mentor.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We wipe out and regenerate all configure files so there is no point in
patching them.
(From OE-Core rev: 8d7036cdb71e66e619053c2545cfc1fbddf1895b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is correct behaviours to output help and version information,
and should return 0;
When input parameter is invalid, print help information and exit.
(From OE-Core rev: 7c61daa08fa51557e0e6785e738646cb5d8de91b)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add an example device_table in the SDK under /usr/share/
(From OE-Core rev: be697e3cfa67fa61aa9ef2c9c0c75f4ed452414e)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A newer version of syslinux is required for an EFI enabled isohybrid.
This is used for the the capability to generate 3 types of ISO images,
all of which can be booted off a USB device or HDD if copied with dd.
1) PC BIOS only ISO
2) EFI only ISO
3) EFI + PC BIOS ISO
The syslinux.bbclass required a minor tweak because a few .c32
libraries require dynamic loading from the created media as of
syslinux 5 and up. This was a good time to also fix the
duplication of the AUTO_SYSLINUXMENU block.
[YOCTO #4100]
(From OE-Core rev: 17d74fbd09e377e100423e1a73b9d4ce761a21d7)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mkzftree is needed to allow ISO images to be compressed with
minimal runtime overhead. Below is an example of the savings on a
core-image-minimal.
Before ls -l:
24117248 core-image-minimal-qemux86-64.iso
Using the mkzftree ls -l:
16777216 core-image-minimal-qemux86-64.iso
(From OE-Core rev: 808d4371939ec48ed62e0c0b6614b96d61b1f7b8)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Putting a warning at the top of do_compile is useful but not everyone reads the
file from beginning to end, so use a trap to put the message at the bottom too.
[ YOCTO #4919 ]
(From OE-Core rev: 51950fcbe4b98bdbb8b3dde88a8729e540d9609f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the future bbnote/bbwarn will be integrated into bitbake's logging, so use
those functions instead of echo directly.
(From OE-Core rev: 4933d7ae45d88090191c8ea07fd109ed34925e2d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If sed-native is built before these programs, hardcoded paths to sed-native
can end up in scripts and other parts of the system which may cause issues
if they are later used from sstate and sed-native is not installed.
To avoid this, this patch changes the global site configuration to
specify that plain "sed" is fine to be used. We need to spell this
out for gcc since it doesn't see the site files since we don't autoreconf
it. We can remove the values from libtool. We tell perl to use "/bin/sed"
since it requires a path and the system sed should be just fine for it.
[YOCTO #4971]
(From OE-Core rev: 2ec171cb188601bf18c6c2895870907024b1c52a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the MACHINE can now be specified in adt-installer.conf, in order to
install the proper toolchain and environment script for the given
machine, add a sanity checking at the beginning to make sure MACHINE is
set for the wanted architecture.
Also:
* uncomment the x86 target variables, in adt-installer.conf, in order
to have qemux86 MACHINE set, by default, and also the sysroot
installed (since it doesn't make much sense to install the toolchain
without a target sysroot);
* remove 'sudo' when creating relocate_sdk_tmp.py because the file is
created in adt-installer directory;
[YOCTO #5259]
(From OE-Core rev: 0623a0e1bd7cf0c405a0469e9f16779971c0c3b5)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if SDK is installed in a directory that needs sudo
preivileges, the target sysroot is also installed with sudo, even though
the location is in users's home directory.
This patch reuses the ownership checking code and uses it to check if
sudo is needed for target sysroot too.
[YOCTO #5259]
(From OE-Core rev: 5acfced041477d8c272485196e87ad601a0ce5b4)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pushd is not available when system is using dash as default shell
(From OE-Core rev: ec7e738845f72888b0016340d7da636e5ec46a1b)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The changes in this commit, dc5f6c3898,
moved apt config directory from native SYSROOT to WORKDIR.
Unfortunately, Dir::Etc in apt.conf was not changed accordingly and
sources.list file could not be found during do_rootfs().
This commit fixes this issue.
[YOCTO #5241]
(From OE-Core rev: 65a2a1e1d0b0e3dcc34d47f46185f24d753b53dd)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
That is a generated file and patching it might fail, the patch already patches configure.ac
which will have the configure file regenerated.
(From OE-Core rev: daa56093de3a518b79480c90ec5124a79189bf7b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a first in a series of patches to add items
to the nativesdk toolchain tarball.
Many of which are Yocto specific and needed to create a
rootfs with pre and post install hooks successfully run,
using only the toolchain tarball.
End goal is to create a sandbox where _users_ can customize a rootfs from a
package feed with their package manager of choice.
(From OE-Core rev: e70019bcdce83ae2a202338518f8725775abaa32)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Libtool scripts were finding bash was /bin/sh and then using bashisms which
then got into sstate and used on machines where /bin/sh might be dash.
This changes things to search for bash first since its preferred. We then hardcode
bash into the scripts which is more correct.
This does mean we have a dependency on bash but many of our scripts have
that anyway.
(From OE-Core rev: 367a19aaf31bcf997f10d045e7954cc800189052)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The --enable-dependency-tracking option was added to workaround build
issues in libatomic. This fixes that build problem properly and removes
the flag since the dependency tracking code appears to be full of races
which are much deeper and harder to fix.
As per the automake manual, dependency tracking is only useful and worth
the build performance cost if you are doing more than one compile of the same
source code which in most cases we are not so this is a good thing anyway.
(From OE-Core rev: a3b665a80abed4c0659925e1cceb1568af023711)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
btrfs-tools was failing occasionally due to version.h being missing. This
fixes the problems, thanks to several people on #yocto for helping out
why my lack of make knowledge of old fashioned suffix rules :)
(From OE-Core rev: 7be8010186889cece97829025d97d94f21c1f2e5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The exported SDK only needs simulated root privileges for specific
tasks, such as the user-mode NFS server or rootfs extraction, and
oe-core does not support multilib builds in the generated SDK, so
it is neither necessary nor possible to build a 32-bit libpseudo.so
for a 64-bit SDK.
[YOCTO #5135]
(From OE-Core rev: 908b179b798704db74c886ec4c70c0942b09cb00)
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* temporary work around for build issue on armv4t:
| cp/decl.o: In function `bad_specifiers':
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7171:(.text.unlikely+0x24): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7173:(.text.unlikely+0x32): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7176:(.text.unlikely+0x3e): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7180:(.text.unlikely+0x4c): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7182:(.text.unlikely+0x5a): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7185:(.text.unlikely+0x66): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7189:(.text.unlikely+0x74): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7191:(.text.unlikely+0x82): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7194:(.text.unlikely+0x8e): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7198:(.text.unlikely+0x9c): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7200:(.text.unlikely+0xaa): additional relocation overflows omitted from the output
| collect2: error: ld returned 1 exit status
| make[2]: *** [cc1plus] Error 1
(From OE-Core rev: 148c7e990831ed708f7fb064ec8f05657a323850)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the mouse pointer enters the qemu window it takes a pointer grab. This
doesn't sound too dangerous at first but it turns out that SDL will infinitely
busy-loop if it can't get the grab (e.g. if the screen is locked) and the
average autobuilder setup's X server will have locked the screen a few minutes
after boot.
The result is that on many autobuilders apparently random qemu instances (the
top-most one under the pointer) will hang during boot.
To resolve this add an option (via an environment variable) to never attempt a
grab. The default behaviour remains to grab so that everyone else doesn't see
any change.
(From OE-Core rev: a60b1ebbb8f81245f3ccf25b3f9d63677de75b85)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building cmake for native, we don't use the system libraries and
thus cmake builds its own internal version of libarchive; this requires
zlib, bzip2, and e2fsprogs. We can add to DEPENDS for the two former
libraries and patch out the latter.
(From OE-Core rev: fe6ca47a256b775e1aa5750b9dd31e27230cf781)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch updates libtool.m4 (and its output) to resolve a problem
with variable 'lt_sysroot' not being properly updated if the option
'--with[-libtool]-sysroot' is not provided when running the 'configure'
script for a package.
According to the help text ouput from 'configure':
--with-libtool-sysroot=DIR Search for dependent libraries within DIR
(or the compiler's sysrooot if not specified).
Due to mixed up cases in a switch statement, when checking if the option
was specified or not, wrong actions were taken resulting in an incorrect
sysroot and failures to properly locate e.g. .la files when using the
populated SDK toolchain.
For current upstream status see:
http://lists.gnu.org/archive/html/bug-libtool/2013-09/msg00005.html
(From OE-Core rev: f5cf7e1a5c85fb320faa9cbeef24f491706b4c1d)
Signed-off-by: Hans Beckerus <hans.beckerus at gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a "File name too long" error when len(TMPDIR) = 410, this is
because the function getLocalPath() converts the filepath into the
filename, so there would be the error when len(filename)
> NAME_MAX, truncate the filename to meet NAME_MAX will fix the problem.
[YOCTO #5201]
(From OE-Core rev: 9f0427edee6bf62d3fe7cdceb07f59a5776c8c4f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The update is needed to support generation of EFI boot images that
work with optical media. Specifically the "-eltorito-platform efi"
capability for mkisofs is needed.
[YOCTO #4100]
(From OE-Core rev: aaa85b0706197423786dfeae386dbb402ee15684)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
vala-native builds were working because most systems have
bison installed on the host. Add an explicit dependency on
bison-native since bison isn't a sanity checked host tool.
(From OE-Core rev: 4bcc087290661544dd5f6466d2d6ab74488f34ec)
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch redhat-portability.diff causes this issue
so lets revert the portion which was using %a instead of %m
thats recommended anyway, redhat patch seems to be targetting
old compilers.
(From OE-Core rev: c1cbc57eb80d2cab9a80d5e5aa65419f40eefb15)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is from the Anjuta integration which was removed many years ago.
(From OE-Core rev: db488bf8130dba2ad8771b0634e3c5de452f23f2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I mistakenly named the allarch opkg repo the same as nativesdk one...
This patch fixes it.
[YOCTO #5181]
(From OE-Core rev: 98f39b0ae4ed45194a165de3913f27745481cb7a)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we have a hierarchy of pkgdata directories and the code has to put together
a search path and look through each in turn until it finds the data it needs.
This has lead to a number of hardcoded paths and file globing which
is unpredictable and undesirable. Worse, certain tricks that should be
easy like a GL specific package architecture become problematic with the
curretn search paths.
With the modern sstate code, we can do better and construct a single pkgdata
directory for each machine in just the same way as we do for the sysroot. This
is already tried and well tested. With such a single directory, all the code that
iterated through multiple pkgdata directories and simply be removed and give
a significant simplification of the code. Even existing build directories adapt
to the change well since the package contents doesn't change, just the location
they're installed to and the stamp for them.
The only complication is the we need a different shlibs directory for each
multilib. These are only used by package.bbclass and the simple fix is to
add MLPREFIX to the shlib directory name. This means the multilib packages will
repackage and the sstate checksum will change but an existing build directory
will adapt to the changes safely.
It is close to release however I believe the benefits this patch give us
are worth consideration for inclusion and give us more options for dealing
with problems like the GL one. It also sets the ground work well for
shlibs improvements in 1.6.
(From OE-Core rev: 1b8e4abd2d9c0901d38d89d0f944fe1ffd019379)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[ YOCTO #3723 ]
Add a mode to smart that will allow an installation to continue, instead of
failure in the case that one or more items is uninstallable.
Uninstallable packages are simply ignored, and no error is generated.
(From OE-Core rev: bdf07b1698d228dc7ff555199a269b1ff8ceca19)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 637e0484ea4e7a39ac4d9c407c585201e6be1bc0)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, adt-installer allows only the installation of qemu target
sysroots.
The changes in this patch do the following:
* add a new setting in adt-installer.conf (YOCTOADT_TARGET_MACHINE) for
each target architecture. For example, for arm we can choose to use a
qemuarm sysroot or a beagleboard sysroot. By default, only the qemu
target sysroots are selected (current behavior);
* change adt_installer scripts to allow installing the correct
meta-environment package for the selected machine;
* remove some left-over commented lines;
* use packagegroup-cross-canadian-${MACHINE} when installing the cross
canadian packages instead of doing it separately for each package;
* change the opkg config files in order to be able to find the
packagegroup package, which is allarch;
[YOCTO #4783]
(From OE-Core rev: 02085d410bf734e833d45293f4d5b06bb9536a60)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apparently, when opkg/dpkg and run-postinsts are installed in the same
time, opkg/dpkg postinstall overwrites the run-postinsts link in rcS.d.
This will make run-postinsts script useless and the delayed postinstalls
will not be run.
This issue happens only when 'package-management' is disabled and, in
the same time, dpkg/opkg ends up in the image: either pulled by some
dependency or manually installed.
With this patch, both opkg/dpkg and run-postinsts scripts will run but
the former will silently fail because the package metadata is removed from
the image since 'pacakge-management' is disabled.
[YOCTO #4484]
(From OE-Core rev: 882da38f226acc40c041155218549edad461b7d7)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add packaging for libgfortran and libquadmath as well as tweak the packaging
for libmudflap since it was broken.
(From OE-Core rev: 8a726d14a345ef35c6d8d8e369bf3691cee879bf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu.bbclass adds PSEUDO_UNLOAD=1 in qemu_run_binary to avoid reference to
pseudo functions that may not exist in the target environment. This patch
detects the addition of that variable within the environment to which the
call applies, even if not present in the parent environment.
As a side effect it fixes a memory leak.
[YOCTO #4843]
(From OE-Core rev: 9ea32ef507c914f906b3dcc0bb29813a4e0dacba)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The create_wrapper functions of utils.bbclass cause implicit
dependencies on bash, which may not be suitable for deployment on
target. Besides, the wrapper doesn't seem to be necessary on target.
(From OE-Core rev: 2ca72d35e839a0fa24d33bf75343f187792f4e2c)
Signed-off-by: Olof Johansson <olofjn@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do-autoreconf patches only change generated files. We run autoreconf ourselves
so we don't need these patches. Worse, they cause failures since the do_patch
task can't rerun after configure since the files change and the patch is no longer
clean.
Drop the patches since we don't need them.
(From OE-Core rev: 37e9a01d38892e8a6fd225854e5b8cc332a5f2ea)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These have been deprecated for a long time, convert the remaining
references to the correct modules and prepare for removal of the
compatibility support from bitbake.
(From OE-Core rev: 6a39835af2b2b3c7797fe05479341d71a3f3aaf6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are back ports of 2 patches from upstream to address
CVE-2011-4944
CVE-2013-4238
(From OE-Core rev: 4606eab53e8eff57d6369ea20a5ea63916ea3ea7)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These patches are backported from upstream since it might be risky to update right now
They address the following CVEs
CVE-2012-6329
CVE-2013-1667
(From OE-Core rev: b6c286c447e50fe499f03b64c6be80ac18504265)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add dependency on lzo acl e2fsprogs to fix the below building failure
1. commit b268a417259b9[add lzo compression support to restore] needs lzo
cmds-restore.c:30:25: fatal error: lzo/lzoconf.h: No such file or directory
2. btrfs-tools includes <sys/acl.h> which is provided by acl
btrfs-convert.c:32:21: fatal error: sys/acl.h: No such file or directory
3. btrfs-tools always needs e2fsprogs
btrfs-convert.c:44:28: fatal error: ext2fs/ext2_fs.h: No such file or directory
(From OE-Core rev: 51bb56a19f03e341a0b46199dddbbc3e9b209904)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* http://gcc.gnu.org/bugzilla//show_bug.cgi?id=57717#c7
* fix the segfault issue of dd on e500v2 targets
Since double-float is disabled for e500v2 targets build due to ICE of gcc-4.8.1,
accordingly %Ld format of sprintf is disabled.
Address Bug 4910 - [p1022ds]urandom: segmentation fault
(From OE-Core rev: a4fefac26d91bc56d5d28e1c9973a189d2509d45)
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's not necessary to specify the protocol parameter when it's the
default protocol for the fetcher, e.g. the default protocol for
git fetcher it git, "protocol=git" isn't needed.
(From OE-Core rev: a2bab241c64428d5109c3c5ac5de4463fbad70c5)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Docutils is a text processing system for processing plaintext
documentation into useful formats(HTML, XML, man-pages). This is
required by the Midori web-browser.
* Update 0.5 from meta-oe to 0.11.
(From OE-Core rev: 1bc1ff887c29376bb0d05beee1bbc2cf25b08419)
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Vala is a C#-like language dedicated to ease GObject programming.
It is required by the Midori web-browser.
(From OE-Core rev: 649b48557d8702daaf4f28482848ab0b07abed83)
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CQID: 431771
configure cannot determine the proper cpu, os, or
architecture for mips64, and possibly other arch's,
because of faulty code added to Arch.pm in the latest
release from upstream. We remove that code.
(From OE-Core rev: e56b4af3a325d6d5332c779e6253da9b3cd2fce0)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some platforms its useful to be able to configure LTO so provide a variable
to allow this to happen.
(From OE-Core rev: e4582a51a2500ad3b418e53170f5fb6b2cbd98a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This script is originally from Darren Hart, it will be used for creating
the ext* filesystem from a given directory, which will replace the
genext2fs in image_types.bbclass at the moment, we may use the mke2fs to
replace this script again when it has the initial directory support.
Changes of the script:
* Rename it from mkdebugfs.sh to populate-extfs.sh
* Add a simple usage
* Add checking for the number of the parameters
* Add the "regular empty file" and "fifo" file type
* Set mode, uid and gid for the file
* Save the command lines to a file and batch run them
* Change the error message
* Improve the performance
* Add the support for hardlink
[YOCTO #3848]
(From OE-Core rev: 265f91149aa8c475ebe5b7069044ed94b7857fa9)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_write doesn't fully set up the first extent header on a new
inode, so if we write a 0-length file, and don't write any data
to the new file, we end up creating something that looks corrupt
to kernelspace:
EXT4-fs error (device loop0): ext4_ext_check_inode:464: inode #12: comm
ls: bad header/extent: invalid magic - magic 0, entries 0, max 0(0),
depth 0(0)
Do something similar to ext4_ext_tree_init() here, and
fill out the first extent header upon creation to avoid this.
[YOCTO #3848]
(From OE-Core rev: 7d1e51681d25f6e6d2c20744825723ad5c83861c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only read the cache when:
bufsize == sizeof(struct ext2_inode)
then we should only update the cache in the same condition, otherwise
there would be errors, for example:
cache[0]: cached ino 14 when bufsize = 128 by ext2fs_write_inode_full()
cache[1]: cached ino 14 when bufsize = 156 by ext2fs_read_inode_full()
Then update the cache:
cache[0]: cached ino 15 when bufsize = 156 by ext2fs_read_inode_full()
Then the ino 14 would hit the cache[1] when bufsize = 128 (but it was
cached by bufsize = 156), so there would be errors.
[YOCTO #3848]
(From OE-Core rev: ad8452196c5b1a54c14fd00bbf421f68aea65186)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Let debugfs do sparse copy when src is a sparse file, just like
"cp --sparse=auto"
This patch has been reviewed by the linux-ext4 mailing list, but isn't
merged atm.
[YOCTO #3848]
(From OE-Core rev: 723adaf8fbba61b7f1adc8e4a13ddf1cfb5c0bcf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The max length of debugfs argument is 256 which is too short, the
arguments are two paths, the PATH_MAX is 4096 according to
/usr/include/linux/limits.h, so use BUFSIZ (which is 8192 on Linux
systems), that's also what the ss library uses.
This patch has been reviewed by the linux-ext4 mailing list, but isn't
merged atm.
[YOCTO #3848]
(From OE-Core rev: a916a127768291ca7c614976e05c90153fec2956)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Uprev guilt to the latest guilt version from its upstream repository.
As part of the uprev all of the previous changes required for the
yocto kernel tools to use git to manipulate series files have been
dropped. These changes were specific to circumventing parts of guilt's
internal santiy checking to allow specific Yocto kernel manipluation
of sub-series files.
Since the kernel tools no longer need guilt, we can use an up to date
and nearly pure upstream version of guilt.
(From OE-Core rev: 595c4469adc36d88ba2403915fc6c1d355014a58)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
See the patch headers for more information about the cross-canadian build failures
these patches avoid.
(From OE-Core rev: 2bae60b8a3cb7783c06e35a2962e56110e876957)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were darwin8/darwin9 overrides spinkled in the code from times gone
by. Lets settle on the darwin override and remove the others since its pointless
duplication. We always inject darwin into OVERRIDES if needed in the darwin8/9
cases.
(From OE-Core rev: 8d5e6eed7802a6056f9eaa50a85e3eee00fe2742)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove the duplicate EXTRA_OECONF_PATHS that is overwritten
* Merge the do_compile and do_compile_prepend
* Group dependency and configuration variables together
(From OE-Core rev: 430b1d6fcbf60df35036fe5bbf8e55f7fb8f5341)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This also has the advantage of removing the confusing sdk naming which
has been purged everywhere else in favour of cross-canadian.
(From OE-Core rev: cbb63ca9e7e6d397198808e862f812f1012c74a7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hardcoding -nativesdk as the sdk package architecture is inflexible. We may have
multiple different target OS and we need a way to be able to separate them. Turning
this into a configurable value allows the flexibility we need to build different
SDKMACHINEs with different OS targets.
The commit should have no behaviour change, just makes things more configurable.
(From OE-Core rev: a2110e86b98d646e136de9ec6b8e668079b0d4f4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This removes duplication and follows the pattern of the other gcc recipes.
(From OE-Core rev: 3296c896f5a5ef7dd50ab4e00ddbf1c2476462dc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some SDK platforms have elfutils support, some do not, therefore allow
this to be configured.
(From OE-Core rev: 717e940d2c2beccfda31dda16a2d0d6d9a495042)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The include was useful historically, its not anymore so lets remove it.
This should have no functional change except on any layers directly depending
on it or gcc-cross.inc but even then it would only impact sh4 and is easily
fixed if there was a problem.
(From OE-Core rev: e7e8fe11c34bf05179f3bbaa2fb1af7b7125696a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I don't understand why we're building the target libgcc in the canadian-cross build
since it should have been built elsewhere. The compiler configuration isn't correct
to build a working target libgcc in all cases anyway.
To avoid various weird build errors, stop building it.
(From OE-Core rev: b0d1ab6242b6ce2bcdd0e4e3e61600344fcd2907)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On platforms like windows, executables have extensions. Whilst I'm not proposing
we wholesale support windows extensions, this small tweak allows a cross compiler
targetting mingw to be built which does seem like a good use case.
The patch therefore adds an EXEEXT which the mingw layer can set for the libexec
symlinks.
(From OE-Core rev: 8dcf0d95b654fa6cc56193168aaa744052ad8ffc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We already use relative links for other gcc libexec links, this changes the sdk
do_install to match elsewhere and use relative symlinks too. This makes things
slightly easier in the SDK installation process and standardises.
(From OE-Core rev: ecfa1141e731224cc5a099f8dfd22878f23359ec)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This disabling of PARALLEL_MAKE has been forward ported for gcc-cross-canadian
since at least 2009-09 and gcc 4.3.3, probably older.
I've tested this with high values of parallel make and it all seems to work and
we usually build gcc with parallel make so it seems unlikely there are issues.
Lets therefore enable it.
(From OE-Core rev: cee90d230899eb1255d586e6ee4fad0d94348cfd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds a new argument to opkg-cl, --add-exclude, which is
used to add package names to the list of packages to exclude
from the install.
If an excluded package is needed for the install to resolve,
an error will be generated. Recommended packages will not
generate an error.
(From OE-Core rev: 63c61b7c0c8aeb89661e3bb85e281dd1ef5b618c)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new --no-install-recommends option is similar to the behavior of
apt-get's --no-install-recommedns. Only required packages will be
installed.
(From OE-Core rev: 86a30a88cf89ed97c372c391169f4ae243c89fd2)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to attempt to reduce image sizes by skipping recommended packages,
a new mode was added to smart that only evaluates required packaged.
(From OE-Core rev: 6fd8141bbdcd84c591149d84ad84effc2357de72)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update smart to support a mechanism for excluding specific packages from the
install process. An error will be generated if this package is required.
(From OE-Core rev: 87660d636c2ebe76cd9dff2a334f135def9a0cf3)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sync to latest cross-prelink, as of Aug 1, 2013.
Drop the PR number, no longer needed.
(From OE-Core rev: b59d256349cc0ac19357158be8e63bd52ab9fb51)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Compared to hard coding the numeric group and user ids in the device
table files, the way of using user/group names is preferred.
This patch adds the ability to makedevs to correctly deal with device
table files with user/group names in them.
To maintain backward compatibility, the way of using uid/gid is still
supported.
[YOCTO #1159]
(From OE-Core rev: 1fcf718e3a1e50446ab61972069566e5016bc625)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the current implementation of postinst logging mechanism, the
location for log file is configured via the POSTINST_LOGFILE variable.
The POSTLOG variable is obsolete now, thus removing it.
(From OE-Core rev: 6aaf2d5c51eb4ee6acbb85fd4aa5f44406907bc2)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should not skip it always since same recipes provide
qemu-native too so user class-target override to make it
only skip for target recipes
(From OE-Core rev: 23d633cc65cf31486263f120c71df82186cfdd22)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Build dpkg-native on Fedora 19, it fails with:
/usr/include/c++/4.8.1/cstdlib: In function ‘long long int std::abs(long long int)’:
/usr/include/c++/4.8.1/cstdlib:174:20: error: declaration of C function ‘long long int std::abs(long long int)’ conflicts with
abs(long long __x) { return __builtin_llabs (__x); }
^
/usr/include/c++/4.8.1/cstdlib:166:3: error: previous declaration ‘long int std::abs(long int)’ here
abs(long __i) { return __builtin_labs(__i); }
^
That because header cstdlib is included in a 'extern "C"' block that gcc
4.8 doesn't support. Fix it by move the header file out of the 'extern "C"'
block.
(From OE-Core rev: 7de61ecc3efc43c625dde9a66f5c05e980a82e34)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
opkg is GPLv2+ licensed but it has optional support for sha256 checksums which
was GPLv3+ licensed. This code is not built unless '--enable-sha256' is passed
to the configure script, the default is equivalent to '--disable-sha256'.
However, the header 'sha256.h', which is GPLv3+ licensed, is in the list of
header files to be installed and thus could end up in the libopkg-dev package.
As this header is installed to '/usr/include/libopkg' it is very unlikely that
it will ever be used. However, if you're uncomfortable with GPLv3 code going
anywhere near your target filesystem you won't want this to happen.
The simplest solution is to replace the sha256 implementation in opkg with the
implementation from coreutils-6.9 which is licensed under GPLv2+. This is
committed to the opkg subversion repository as r652/r653.
The only intervening commit between r650 (previous SRCREV) and this is r651,
which integrates 'obsolete_automake_macros.patch' into the opkg sources. Thus
this patch isn't needed in oe-core anymore.
(Note: Before 873689bbabba25e7be5c12317c04519a7bc8d0ef, this header is only
installed if opkg is built in its source tree (ie. ${B}=${S}). After that commit
the header will always be installed)
(From OE-Core rev: 3c6a8a39d820f14f9eb3df3d719cef2c469769da)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some LSB packages appear to have the platform set to '%{_target_platform}'
which is not a valid platform field. This causes a failure of the type:
warning: package lsb-test-core-4.1.15-1.x86_64 is intended for a %{_target_platform} platform
When we detect an invalid platform, fall back and try to construct a new
platform name that may be valid based on the arch and os contents of the
package. (This should only ever be needed by invalid or older RPM packages.)
(From OE-Core rev: 6513fa327aeb7e9fdd313290c205917952eed226)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the #define references to match RPM_VENDOR_OE.
(From OE-Core rev: a84ecc5ad158a7529a904785de25ebfedf5767a7)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed for x264. Enabling it for libav also improves performance
on x86 and x86-64. Two minor changes from the meta-oe recipe:
* Set SUMMARY instead of DESCRIPTION
* Drop setting of S - it was setting it to the same as the default
(From OE-Core rev: 2619c81d6641ef5d4dee58c128a1af140429c248)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE carries a patch to pass CFLAGS to qemu. However, we can avoid
patching by passing CFLAGS with qemu's --extra-cflags option.
Tested that building qemu-native still works without zlib-dev
on host, and that qemu builds.
(From OE-Core rev: 67b6d8d9f987a59090a9a8af61cf740207703dff)
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The neon update is not recognized but subversion, so we need to patch the configure.ac
to know about 0.30, otherwise we don't have http/https support in subversion.
(From OE-Core rev: 291ab168fac15eae0e4c9234e16f394b0e1547a0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two patches were removed because changes that they provide are already exist.
(From OE-Core rev: 6de68622c0658e1bba509c66c137eb419cdbdabf)
Signed-off-by: Yevhen Kyriukha <kirgene@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should fix the problem seen where gcc ICE
was happening when compiling iperf with older 2.6.x
kernel
Test this patch by reverting below commit in meta-fsl-arm
commit daf582c93a7283fb0af3b25fe2ada48f4c9985c4
Author: Otavio Salvador <otavio@ossystems.com.br>
Date: Tue Jul 2 11:52:51 2013 -0300
perf: Disable FPU tune for i.MX5 SoCs to workaround GCC ICE
(From OE-Core rev: 8ab1d16b6c6d946b625b6872e5d0f155206f4bad)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
CC: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rebased patches and removed mips related arch triptlet patch due to being upstreamed
(From OE-Core rev: 6d4257217f8c5c61ae9bc02b6607d1066168c03a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
makerace.patch: adapted to the new version
(From OE-Core rev: ad69f62e42c131dcccd33b0e39c61a431f581bea)
Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed patches since they were included upstream.
Added a patch to not compile flex.pdf doc since it needs texi2dvi.
(From OE-Core rev: bed86662efdd73be2a0dcde217d44be8e00c0822)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
[sgw - Dropped PR]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous patch to fix the installation of libopkg headers has been accepted
upstream and is the next commit after the SRCREV used by the opkg recipe.
Therefore the patch can be replaced by a simple update of the SRCREV.
(From OE-Core rev: e14df11795a03da4bb36f5172edbf9ca7e8ba681)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The REDIRECT_CMD variable is now obsolete, remove it.
(From OE-Core rev: cba8f3257bb645dafdfa7c672bbdc4b0f0c094e6)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If one specifies a relative target sysroot path, then he/she must always
be in the same directory in order to be able to compile.
With this patch, adt_installer will automatically convert user
supplied relative paths to absolute.
[YOCTO #4955]
(From OE-Core rev: 1abf13cb035fa9e02f0c6a1c6f3524b649d2a701)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is for Yocto bug #4920. The NO32LIBS variable is intended to allow
the user to force the creation of a 32-bit libpseudo, for use with things
like prebuilt binary toolchains. Unfortunately, the tests for likely
compilability (stubs-32.h) were still present, so you would get silent
failures. And if you did cause it to try to build, the failures were not
particularly clearly explained.
So, we:
1. Emit at least a message during configuration saying we're only
building 64-bit, if we are.
2. Warn the user for at least one common case where we know builds
are likely to fail.
3. If NO32LIBS is 0, we try the compile for sure, and if it fails,
we've emitted at least some sort of message up near the top of the
compile output that tells you what might be wrong.
(From OE-Core rev: 22548b3243dfa2dc9861b0f15530632b37812a8c)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Package recipe should contain version token in its name.
(From OE-Core rev: 6d4e71b72aee4cf03bc93d2143e6a6b67bf6cfee)
Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Package recipe should contain version token in its name.
(From OE-Core rev: c3c424b447ed4ad46263ef379b7e8892f3974821)
Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds support for a flag that is saved into Smart's configuration against
a package that says it should not be installed if it is only recommended
by a package being installed rather than required. This will enable us
to add BAD_RECOMMENDATIONS support for RPM.
(From OE-Core rev: 70517fca31261c1ca4b15bb38f8960b2f95993ba)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a requirement of a package is conflicted, depending on how the
solution is reached, Smart's transaction code may eliminate all
providers of the requirement and then error out because nothing provides
them without saying why. To work around this, store a reason and report
that back if we need to, so for example instead of:
error: Can't install packagegroup-core-ssh-dropbear-1.0-r1@all: no package provides dropbear
we will now get:
error: Can't install packagegroup-core-ssh-dropbear-1.0-r1@all: unable to install provider for dropbear:
error: dropbear-2013.58-r1.0@armv5te is conflicted by openssh-sshd-6.2p2-r0@armv5te
Fixes [YOCTO #4305].
(From OE-Core rev: 1ed09b87fc8780d4a99f6516493fae2e0c92862c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install strace test suite and run it as ptest.
(From OE-Core rev: 6e2d8724b023e2b6b55db7845009b4422a53c3b3)
Signed-off-by: Gabriel Barbu <gabriel.barbu@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the postinsts of rpm, deb and ipk are all handled in the one
central place, run-postinsts.bb, the rpm-postinsts.bb recipe is actually
obsolete now. Remove this recipe to avoid confusion.
(From OE-Core rev: 308185c215b8dd969d1230e52444ce3c11fc2c57)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu packages can NOT be built for mips64, Set COMPATIBLE_HOST to null to
block build them for such platform.
(From OE-Core rev: 239d46d9060ee4f30da4f7633377639283f16453)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it's autodetected from sysroot
* add PACKAGECONFIG to make it deterministic
(From OE-Core rev: c11aaac4952320f565bd65ec5f601c50763408a7)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it's autodetected from sysroot
* add PACKAGECONFIG to make it deterministic
(From OE-Core rev: 2eb394b6111a7df730e38604e8efe8bce5c1653a)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it's autodetected from sysroot
* add PACKAGECONFIG to make it deterministic
(From OE-Core rev: 04f100e7dacc4b78c764a8ec5cedc1b1b4b1c285)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* when it's not detected in sysroot it uses bundled version
* add explicit dependency to make it deterministic
* PACKAGECONFIG wasn't used because configure doesn't have an
option to select which one should be used
(From OE-Core rev: 71efa24f0acd3d38d3223ca9811399eeaf8126e4)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When all postinsts scripts succeed at system startup, it's very possible
that the log file /var/log/postinstall.log is empty. This is kind of
confusing, as that file is supposed to hold information about the postinsts.
Add more logging to the log file to make things clearer.
(From OE-Core rev: d60926b3fc4ba5780aef5b5226d05170892a7133)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The run-postinsts script also handles the #SYSCONFDIR#/rpm-postinsts
directory. Add it to the comment for clarity.
(From OE-Core rev: ca32f9c3f7749aa31d1ea83eda1ca39a2678215b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libtool is picking up libstdc++.so from /usr/lib when trying to link
libasan due to libstdc++.la containing libdir="/usr/lib". If compiling
for x86 and the host has 64-bit /usr/lib/libstdc++.so, the compilation
fails linking libasan with:
/usr/lib/libstdc++.so: could not read symbols: File in wrong format
To resolve this, patch libtool to look for the library in the path the
.la is contained in rather than use the libdir which usually points to
a host path.
[YOCTO #4879]
(From OE-Core rev: ec95dfeea1f17eb232563e105085852058a86c0b)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default when inheriting gettext, "gettext-minimal-native" is added as
a dependency for native. The bb-file for remake use 'autopoint' (not
included in gettext-minimal-native). When building remake-native it
will result in a failure in do_configure for all cases when gettext (or
gettext-native) is not build from some other recipes, before building
'remake-native'.
This is solved by adding a build-dependency to gettext-native in
remake-native.
Fixes [YOCTO #4385]
(From OE-Core rev: 4bd98157f1d7a96741d036e67b04819ccbc9a9c6)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install python test suite and run it as ptest
(From OE-Core rev: a768047cb8fc00ecf13f4db08117c348a9312c47)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is necessary since the valgrind package depends on /usr/bin/perl.
This patch will fix this error while installing into rootfs:
Computing transaction...error: Can't install valgrind-3.8.1-r8@armv7a_vfp_neon: no package provides /usr/bin/perl
(From OE-Core rev: 9b21846ed8ae0fcd7b1d81d026cb03644ca7c1f7)
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Old way find -perm +mode is no longer supported in newer
versions of find (Fedora 19). Man page says:
-perm +mode
This is no longer supported (and has been deprecated since
2005). Use -perm /mode instead.
[YOCTO #4853]
(From OE-Core rev: 21b079e01873e2fb4d8674541e8c5818ba73554e)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix typo of upstream status in tcl-remove-hardcoded-install-path.patch
that may cause some scripts out of work. Fix it.
(From OE-Core rev: 0931eead0f874112836926dd493c9f47b3edbd16)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the issue where g++ is not able to
find C++ headers when sysroot is '/'
The patch needs to be upstreamed into gcc as well.
[Yocto #4812]
(From OE-Core rev: 18537025ca8777a45cb24f1d9ee781323695607a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
QEMU uses the environment variable LIBTOOL by default. We want to ensure
we set it to the proper libtool version, instead of letting it default to
the host system version.
This corrects target building, and ensures we're linking properly for
native and nativesdk versions.
(From OE-Core rev: b91d65fc78c18948ed4ec96f34b85c431dbc3d95)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename recipe to match upstream tarball name which requires a fix the the SOLIBS numbering
(From OE-Core rev: cd749a50eb7dcdb735b5f7bd8b7e15f709e0a38e)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the host Qt installation exists but is incomplete or the installed
qmake architecture doesn't match that of the Qt libraries, cmake was
failing at do_configure. cmake 2.8.10 failed silently here so we should
make 2.8.11 do the same.
Fixes [YOCTO #4565].
(From OE-Core rev: 2bf46fbd25e1a3a44d556758f536fa26c44edb03)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move to using the PACKAGECONFIG mechanism to select configure options
and dependencies. Without this the system will attempt to discover
various dependencies, and sometimes does so incorrectly.
(From OE-Core rev: 8438bbe210de6f565f842d745ccede131fa385db)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
*license changed to GPLv3
*several patches were absolete so I removed them
*redhat-portability & redhat-robustify backported from
latest elfutils-portability & elfutils-robustify from
upstream
(From OE-Core rev: 6edbaf14f875b7759672e8d118c59a01dbdeb853)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The project has switched to using git for version control.
(From OE-Core rev: 8a9a476c03a3bc2782206799933d92e216032ff7)
Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should fix sstate relocation issues with debugedit failing during
do_package on the Yocto Project autobuilder.
(From OE-Core rev: b7c2e01753e4a09388a3282e534bcbd163cd6ef7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is now required by python-argparse-native as of OE-Core revision
8d0e84bdfaf63ad61be7b015dd55dacccfa9132c.
(From OE-Core rev: e9e03d44d6a402fecdf0d62ff09a1f6af9da10bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is used by buildhistory-diff and the OE layer index, and thus will
be useful in the context of the build appliance and buildtools-tarball.
(From OE-Core rev: 449ae5a70bc7d7d08f99de7d272b4cc3c83c3dcc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is required by python-git.
(From OE-Core rev: bcbb34c26a235a103b46aa5c8ae7b3896904a215)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is required by python-gitdb.
(From OE-Core rev: 37890014f406ca2ab24e0ec918af39613642afa0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is required by python-gitdb.
(From OE-Core rev: 31bc9fa8d53110a09ca048039d83213b34f4b7e4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As python-multiprocessing requires python-threading and
python-pickle, this commit adds them as runtime dependency.
The observed behavior was:
When typing 'import multiprocessing' in the python shell on a
minimal image with only the python-multiprocessing recipe installed,
python reports at first:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/multiprocessing/__init__.py", line 65, in <module>
from multiprocessing.util import SUBDEBUG, SUBWARNING
File "/usr/lib/python2.7/multiprocessing/util.py", line 38, in <module>
import threading # we want threading to install it's
ImportError: No module named threading
After adding python-threading as runtime dependency and rebuilding
the image, python reports:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/multiprocessing/__init__.py", line 84, in <module>
import _multiprocessing
ImportError: No module named cPickle
(From OE-Core rev: e913412ca0ff01cb654757c8199e8859f15b7cf7)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When typing 'import argparse' in the python shell on a minimal image
with only the python-argparse recipe installed, python reports:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import argparse;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/site-packages/argparse.py", line 91, in <module>
from gettext import gettext as _
ImportError: No module named gettext
The python-argparse recipe requires the python gettext module,
which is currently provided by python-codecs.
Hence, this commit adds python-codecs as runtime dependency to
resolve the issue.
(From OE-Core rev: 8d0e84bdfaf63ad61be7b015dd55dacccfa9132c)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename patches to make them easly to apply with git
(From OE-Core rev: 040a55d0b730bf78aad0f51e0018faa88655e279)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the user doesn't have rights to access the installation directory,
the sdk installation will fail, add sudo to fix this.
[YOCTO #4760]
(From OE-Core rev: 040010d04672c93f18d60308ecf3c26a26ec5fd3)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When run "autoreconf" in toolchain, there is an error if the host's perl's
version is not the same as the one in the SDK, the error says that the
executable perl mismatches the perl lib's version.
This is because most of the autotools' scripts use the "#!/usr/bin/perl -w"
which is host perl, but the gnu-configize uses "#! /usr/bin/env perl" which
invokes the perl wrapper in the SDK, and the wrapper will set the PERL5LIB to
the SDK which causes the mismatch. We can make all the perl scripts to use the
host perl or the SDK perl to fix this problem.
[YOCTO #4758]
(From OE-Core rev: 487d1fa7b79e89518494986461c157bace842613)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The perl module for automake has an embedded path in it, this needs
to be relocated.
Older versions of 'file' do not return the "ASCII" text in the output for
a perl module file. Hence, the regex pattern didn't match perl module and
they were not getting relocated at all on older distributions.
1) On CentOS release 6.4, the version of file is 5.04
$ file /usr/lib/perl5/Config_heavy.pl
$ /usr/lib/perl5/Config_heavy.pl: Perl5 module source text
2) On Ubuntu 13.04, the version of file is 5.11
$ file /usr/lib/perl/5.14/Config_heavy.pl
$ /usr/lib/perl/5.14/Config_heavy.pl: C source, ASCII text, with very long lines
[YOCTO #4550]
(From OE-Core rev: 7cfab2c895bf4daa7716fb7509e367bf74f016e4)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Spaces are not handled properly in some parts of oe-core and it's safer
to abort toolchain installation if path contains spaces. Even though
we fix space handling in the toolchain installation script, there are
various other parts in the toolchain (perl scripts, sysroot path passed to
toolchain binaries, shebang lines) that would need special handling. So,
for now, just bail out if path contains spaces.
The checking for spaces in the path is done after expanding relative
paths to absolute and tilde conversion.
[YOCTO #4488]
(From OE-Core rev: 8c35ba2d3048ce69f74f72cb2676e4bc162cfb63)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recently it was discovered that many Fedora hosts have a broken version of
make 3.82. Add make to the buildtools-tarball, as well ad modify make to
support building a special nativesdk version.
(From OE-Core rev: ea972fc4ce2268f01be6beeafd27dd949d800f9d)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Savannah bug 30612 describes two different issue. The first,
previously fixed, errors parsing multiple objects in parenthesis.
The second, (this issue), extra white space contained in the
parenthesis.
The fix was backported from the current make git tree:
http://git.savannah.gnu.org/cgit/make.git/commit/?id=b06b8c64a29a5ba3a8daecd829fa2f98d42cb285
(From OE-Core rev: 681b4c2cd9830cd523080aa830748d9c3367c7c9)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original fix worked some of the time, but not on all machines. Fix
this by applying the change in a different way. Following the example of
the existing BUILD_CFLAGS.
Below is the commit message from the original change to help explain why
this is needed:
Configure identifies a number of warning flags (WARN_CFLAGS and
WARN_CXXFLAGS) from the $CC value. The cross compiler may be different
from the host compiler and may not support the same set of flags. This
leads to problems such as:
cc1plus: error: unrecognized command line option "-Wno-narrowing"
cc1plus: error: unrecognized command line option "-Wno-overlength-strings"
Work around this problem by removing the warning flags from the
BUILD_CXXFLAGS value, in a way similar to the BUILD_CFLAGS.
(From OE-Core rev: be21c6e8e4f810e826538337dac6e34ed96e1f6f)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
defs.c dependes on gdk-types.defs and gtk-types.defs. When parallel
compile, it may fails with:
"IOError: [Errno 2] No such file or directory: 'gtk-types.defs'"
Add them to dependences of defs.c to fix this issue.
(From OE-Core rev: edf278eec71552bcd3ac661dce8e8b7489463f6a)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The installation of __glib.so is invoked by install-data-am target
which are generated by automake. installing libpyglib-2.0-python is
invoked by install-exec-am.
"make install" will firstly install libpyglib-2.0-python, then install
__glib.so, the sequence should not be broken, since _glib.so has
dependence on libpyglib-2.0-python. But when enable parallel install,
the sequence maybe break then installation fails with:
"/usr/bin/ld: cannot find -lpyglib-2.0-python"
Disable parallel install to fix this issue.
(From OE-Core rev: e87a0c81c77d11f892a34c2d14ffbeb4342d32dd)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix openjade-native build failure when build directory name contains the
characters ".a".
(From OE-Core rev: f005670ee8f6d02e0b0517a48b47b364f0bddf2d)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add strace configure options libaio and acl to enable or disable build
with them. Then PACKAGECONFIG can be used to handle dependency.
Set "libaio" as a default feature of PACKAGECONFIG.
(From OE-Core rev: 9b6b7973a5e49fe9cd283c5b4af31e8a7940e7b5)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update strace to 4.8:
* Update License file.
* Remove the backport patches which are already in version 4.8.
* Add file git-version-gen from git repo. Without this file configure
fails.
(From OE-Core rev: 3ae2592b40900caaebe2452c875912f82f9e5200)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unit test clock.test check the boundary year 2099 which is not
inclusive. Include 2099 to be a valide year number.
(From OE-Core rev: c6386c8661f18f6b9104c74345120a56e2330ea4)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove hardcoded library install path and then install library to
${libdir}.
(From OE-Core rev: ec06d828d8ee623b0064713583344db84496ef1e)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This backported patch will fix this Xorg issue and, probably, many
others which didn't show up yet.
[YOCTO #4737]
(From OE-Core rev: c659903841da7aa44675d2970d1b92841b91d29e)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On some overloaded hosts, shell commands of autogen may can not
finish in 5 secs. This has caused many build failures, so increase
the timeout limit to fix this.
(From OE-Core rev: 92c7a0bec3f3c9fec04a6019aa9cee395ba5a9ab)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've been using 1.5.1 for a while now with success, so in line with the
OE-Core policy of avoiding multiple versions of the same recipe let's
drop this version.
(From OE-Core rev: c26fd671466f42d76cbd99e275dc91fc322062c4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The header files for libopkg belong in the package libopkg-dev rather than
opkg-dev where they are placed by default.
(From OE-Core rev: f79cd4208340b56afc044d8e3abc72d43d395062)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When opkg is built outside the source directory, libopkg headers aren't all
installed as the search path for headers only includes the directory that make
is being ran in, not the source directory. So we fix this by adding
$(srcdir)/*.h to the list of header files to install.
Without this patch, "/usr/include/libopkg" will only include the file config.h.
With this patch, other files such as "opkg.h" are present which are needed to
compile software which uses libopkg.
The new patch has also been submitted upstream as a fix to opkg itself.
(From OE-Core rev: 873689bbabba25e7be5c12317c04519a7bc8d0ef)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if you build nativesdk-python, install it and try and run it,
you see it search in the default nativesdk path for terminfo files
when the readline module is used.
If terminfo files cannot be found, or if the ones found are incorrect,
the system may emit control characters which confuse commandline
processing.
This patch sets the TERMINFO_DIRS variable to ensure the correct locations
are searched for terminfo files, starting with the nativesdk terminfo files
and falling back to the host systtem's.
(From OE-Core rev: 682861166f39fbdcd0c9b923139faab2d40362cf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes errors in packages using python( build with gcc 4.8)
|
/home/jenkins/oe/shr-core-branches/shr-core/tmp-eglibc/sysroots/qemuarm/usr/include/python2.7/modsupport.h:27:1:
error: 'PyArg_ParseTuple' is an unrecognized format function type
[-Werror=format=]
| PyAPI_FUNC(int) PyArg_ParseTuple(PyObject *, const char *, ...)
Py_FORMAT_PARSETUPLE(PyArg_ParseTuple, 2, 3);
| ^
| cc1: all warnings being treated as errors
| cc1: all warnings being treated as errors
(From OE-Core rev: 5745a482a85c064a1eec960aff104cf8ce588e30)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a symlink to the native Python so that scripts can just invoke
"nativepython" and get the right one without needing absolute paths (these often
end up too long for the #! parser in the kernel as the buffer is 128 bytes
long).
The name "nativepython" was chosen to match the existing "nativeperl" which
serves the same purpose.
(From OE-Core rev: d99dac66e3e121e96c4d8a29aee846d4b8f38622)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
create_wrapper was previously abused to invoke the Perl interpretter directly
instead of relying on #! parsing, which is read into a 128 byte buffer so breaks
with deep build directories.
However we already install a "nativeperl" binary into the native sysroot, so
use sed to change the #! line to /usr/bin/env nativeperl.
(From OE-Core rev: c4f987239fe78783d732df673a5e592bb05a877d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patches removed:
0001-doc-Fix-texinfo-table-markup-in-qemu-options.hx.patch
- applied
0002-docs-Fix-generating-qemu-doc.html-with-texinfo-5.patch
- fixed different upstream
Revert-vmware_vga-Add-back-some-info-in-local-state-.patch
- fixed different upstream
arm-bgr.patch
- this should be also fixed upstream, if still issue please resend.
fallback-to-safe-mmap_min_addr.patch
- this should be also fixed upstream, if still issue please resend.
linker-flags.patch
- unneeded with makefile changes
from configure the obsolete --audio-cards-list option has been removed.
(From OE-Core rev: 408f933f3b5523fc26ee818a16bb4162c4343192)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
run-postinsts is generic and will handle rpm delayed postinsts just
fine. No need to use another recipe.
(From OE-Core rev: 1195a188f366fbbb04b9379d7ea3c7c02130cc98)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe is used only when the package manager is not deployed on
target and there still are delayed postinstalls that need to be run on
target. At the moment, run-postinsts is targeted to dpkg/opkg. RPM uses another
recipe, called rpm-postinsts which, in turn, is used even when the rpm
package is deployed.
This patch intends to make run-postinsts generic and deprecate
rpm-postinsts. Here's why:
* when opkg/dpkg are not deplyed, the meta-data files are useless.
Hence, the awk script is not needed. The postinstall files are already
saved in /etc/(deb|ipk)-postinsts directory and we can use the same
procedure as in rpm's case;
Also, the recipe is moved out from meta/recipes-devel/dpkg to
meta/recipes-devel/run-postinsts.
(From OE-Core rev: 0222e6740ee4670bbf42d246ab3ecad415ffcdee)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to be able to generate a standalone tarball containing tar/git so
add nativesdk versions of the appropriate recipes to allow this to be possible.
Tweak the git perl paths to avoid warnings when building the nativesdk version,
ensure the binaries are wrapped correctly and avoid update-alternatives in
nativesdk-tar.
(From OE-Core rev: c91bb8c76e3bd45690e66f3de79cd3adfe45f600)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Base this on DISTRO_FEATURES, because we don't want it
unconditionally enabled.
(From OE-Core rev: 6956fb01e0c7332e4d8b59cbcb1cd997c54191fc)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
upgrade from 0.9.66 -> 0.9.69
- COPYING file contains now more detailed information.
- reworked a patch because it didn't apply.
(From OE-Core rev: 376612cbf7fa5c68ae3adb6f4c1b4427e69a1871)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add build directory to include directories by -I${B}/include which will
be searched before standard system include directories.
Both libunwind and gcc supply unwind.h, once gcc use libunwind's unwind.h,
the compiling will fail.
This patch is generally not applicable to the upstream as they do not
use libunwind.
(From OE-Core rev: 2b47bce78536a800205b2385bba69038351545e5)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When cross compiling the target compiler, both the cross-compiler
and the host compiler are used. However, the -W options used were
discovered from the cross-compiler and may be incompatible with the
host compiler.
(From OE-Core rev: 1f40202ce3c1282674b6cea39ef709972275f201)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously count actually behaved as end, and did not take start into
account.
(From OE-Core rev: 4fe2b01bfd2831b002e7138dadbc0437df6e9ed6)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a floating dependency that got added in recently and was
caught on the Autobuilder, disable building with LZMA to ensure
consistent builds
(From OE-Core rev: 1e58fc8f6ac8f13d6c86a3ae340d90dd53b3ec27)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Back port two patches to fix the error of complex expressions before @l/@h.
Error sample:
test.s: Assembler messages:
test.s:1: Error: operand out of range (0xffffffffffff8000 is not between 0x0000000000000000 and 0x000000000000ffff)
Fix Bug 4524.
(From OE-Core rev: 9ba812ab1f613d28f9eb3192d2ff1a34dfce33e4)
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The apt recipe had the correct checksums, the -native did not. Depending
on which downloaded first, the build could succeed or fail.
This patch corrects the checksums for -native to match the apt recipe.
(From OE-Core rev: 86d0708bb59952a139e705a8c396e70dd0084b75)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The argument parser in RPM was patched to look for <binary>.real, but since the
wrapper now fakes the right argv[0] rpm wasn't able to parse any options.
(From OE-Core rev: a67b4cfc41819ed77ed2bc4246228e9d006a4317)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dpkg has no DEPENDS on lzma so turn it off explicitly.
[YOCTO #4518]
(From OE-Core rev: 12fbd693f4565e66d10af4e801e7435996d67e76)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After e8d2a2a3646f964ec61ece62e14788cd7184dd01 [OE-Core], file --version
returns file-5.14 instead of file.real-5.14 so the patch is no longer
necessary and causes the build to fail with the following:
| Cannot use the installed version of file (file-5.14) to
| cross-compile file 5.14
| Please install file 5.14 locally first
(From OE-Core rev: f89f705da9bffd9d10628e90a415db4411d22b4e)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes the following failure at do_install building python-smartpm-native
if gettext-native has not already been built and gettext tools are not
installed on the host:
| compiling locale/it/LC_MESSAGES/smart.po -> locale/it/LC_MESSAGES/smart.mo
| sh: msgfmt: command not found
...
| creating $D/usr/share/share/locale/it/LC_MESSAGES
| error: can't copy 'locale/it/LC_MESSAGES/smart.mo': doesn't exist or not a regular file
Note that we need gettext-native in DEPENDS and not "inherit gettext"
here because for native variants, gettext.bbclass instead adds
gettext-minimal-native to DEPENDS and that does not provide the msgfmt
command.
(From OE-Core rev: e8d903e2d5e0c0df18dfd9561c3f8ef340297f1f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the increment > 1 and the start > 0 then the calculation for the
minor device number was incorrect.
(From OE-Core rev: 0a878426bee607a7d961ba475a7ec7e89115df35)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When creating a block of devices (i.e., when count > 0), the wrong
path was used with the call to chown(), effectively trying to change
the owner of some (probably) non-existent file. Thus the created
device nodes were always owned by root.
(From OE-Core rev: e7796880164d6a37c2699a94e1c5391337c5eaa5)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
guile needs to be able to convert strings from ISO-8859-1 in order
to work properly. This patch adds a runtime dependency to the required
convert package, but only when glibc is used. The fix for uClibc depends
on another bug (#4530).
[YOCTO #4019]
(From OE-Core rev: 0e519c99bafd49ecac97b1fb9185a4d02fb44d75)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While the destro didn't install scons, build scons by python-scons-native,
and invoke it with the error:
...
$scons -h
Traceback (most recent call last):
File "/buildarea2/hongxujia/build-20130520-udev-emenlow/tmp/sysroots/x86_64-linux/usr/bin/scons", line 188, in <module>
import SCons.Script
ImportError: No module named SCons.Script
...
1, While building scons as default, scons's lib will be install in the dir of
`scons' or `scons-2.3.0' if the option `--install-lib' is not set explicitly.
2, While build python-scons-native, `--install-lib' is explicitly set, and
scons's lib was not installed in the dir of `scons' or `scons-2.3.0'.
3, While invoke scons-native, the scons searches the lib in ${STAGING_DIR_HOST}/
${PYTHON_SITEPACKAGES_DIR}/scons, ${STAGING_DIR_HOST}/${PYTHON_SITEPACKAGES_DIR}/
scons-2.3.0 rather than ${STAGING_DIR_HOST}/${PYTHON_SITEPACKAGES_DIR}.
Use create_wrapper to relocate scons-native to add `${STAGING_DIR_HOST}/${PYTHON
_SITEPACKAGES_DIR}' to PYTHONPATH, so scons-native could find out the lib.
[YOCTO #4562]
(From OE-Core rev: 1aa828d05ae1614689542c6a9ce6425a088bdc7d)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will enable or disable xattr with the correct dependency
on attr as needed.
(From OE-Core rev: dd219cb2608e5800dcd900117b37ad8cf9ac689a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The path to the native perl was incorrect leading to rootfs failures. This
patch corrects that problem, it's a complementary fix for commit:04432446.
(From OE-Core rev: 0f99d7fed094a59d2c5c01c83ea38dc852aadf6b)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the QA warning:
WARNING: guile: The compile log indicates that host include and/or library paths were used.
(From OE-Core rev: 1582975cd89b0b71c93913f07648c67f2b18bc99)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Incorrect exec-prefix path was given to gdb which leads to gdb
startup failure when SDK is not installed to its original destination.
Gdb relocates the exec-prefix path, so it will work for SDKs that
are installed to different location. PYTHONHOME env in no longer
neeeded for gdb.
[YOCTO #3839]
(From OE-Core rev: e77603324332b932c73c9e22ab65a0b9b7c17798)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update required to pass "movi" related build errors when gcc-4.8 is
used.
libgcrypt, slang, mysql5 were failing like this:
| {standard input}: Assembler messages:
| {standard input}:316: Error: immediate value out of range 0 to 255 at operand 2 -- `movi v3.8b,-106'
| {standard input}:348: Error: immediate value out of range 0 to 255 at operand 2 -- `movi v3.8b,-8'
| {standard input}:352: Error: immediate value out of range 0 to 255 at operand 2 -- `movi v3.8b,-27'
(From OE-Core rev: 2489151dbfc8bc002d89ab199d457ab3794c54a8)
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a race condition between when the CONFIG_SITE list is generated and
then used here via the cat to create the config.cache and in *all* configure
scripts when reading from CONFIG_SITE.
The race in this case is that the sstate setscene task runs on a package that
contains a site config file (ncurses in this case) and then bitbake decides
that it needs to rebuild and cleans out the site config file, so it existed
for siteinfo_get_files() to find in SITECONFIG_SYSROOTCACHE and then was removed
for the rebuild. When bintuils tried to run the do_configure() task which creates
the binutil's version of config.cache it reads from CONFIG_SITE which now contains
the non-existant site config file. (confused yet ;-)?
Currently the configure script does a test -r to ensure the file is readable
before using it, therefore having the cat succeed regardless of the file being
available is consistent behaviour.
(From OE-Core rev: ffd8f05e5548500199c9b04a174067811ad2c5e7)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
0001-doc-Fix-texinfo-table-markup-in-qemu-options.hx.patch and 3f08ffb4a4741d147634761dc053ed386243a0de.patch were backported in 1.4.1
(From OE-Core rev: d3fd92010a0b965fe1b7696f7c4e6c02d07f85dc)
Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a optional dependency on xattr (and thus the attr package),
disable it by default, to ensure it builds correctly.
(From OE-Core rev: a7de32c8ad1405ed31b620fb99dfe0fe80ac23a9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On 05/17/2013 05:31 PM, Björn Stenberg wrote:
> Unless there are clear advantages with patching t/TEST that I have overlooked, I suggest using sed in run-ptest instead.
Ok.. Here is the new commit.
Removed the patch and added a call to sed in run-ptest. See attachment
for the test log.
From: Jesse Zhang <sen.zhang@windriver.com>
Date: Tue, 14 May 2013 02:53:30 -0400
Subject: [PATCH 1/1] perl-tests: convert to ptest
Replace PERL_TEST_DIR with PTEST_PATH, and rename "tests" with "ptest"
in various places. Also add a run-ptest script.
[YOCTO #4292]
(From OE-Core rev: 364cad5d8eecfec74a7be8cf93e75cd63031101f)
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rebased support-oe-qt4-tools-names as some of the changes where
added in the upstream code.
(From OE-Core rev: 13399264e987b698b120688dc5018adb3fa8522d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable postinst logging by checking the configuration in ${sysconfdir}
/default/postinst.
In this way, the postinst logging is enabled if 'debug-tweaks' is
in IMAGE_FEATURES, and at the same time, we avoid unnecessary rebuild
if IMAGE_FEATURES is changed.
[YOCTO #4262]
(From OE-Core rev: 6f2aa32f10c24c84e581128bb3a976ef071197ac)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable postinst logging by checking the configuration in ${sysconfdir}
/default/postinst.
In this way, the postinst logging is enabled if 'debug-tweaks' is
in IMAGE_FEATURES, and at the same time, we avoid unnecessary rebuilt
if IMAGE_FEATURES is changed.
[YOCTO #4262]
(From OE-Core rev: 35be6ffc19a5156aa029397707f1e6869684b821)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable postinst logging by checking the configuration in ${sysconfdir}
/default/postinst.
In this way, the postinst logging is enabled if 'debug-tweaks' is
in IMAGE_FEATURES, and at the same time, we avoid unnecessary rebuilt
if IMAGE_FEATURES is changed.
[YOCTO #4262]
(From OE-Core rev: 881880992ac0edc5f928f7e3d2a8f3f993284df6)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade from 2.01 -> 3.00
- Updated md5 of the license file because new information
was added by the owner.
- Removed glibc-conflict-rename.patch because it is not
required anymore.
- Updated no_usr_src.patch because it didn't apply.
(From OE-Core rev: 951a8e422be93a3d06d0149f9b070eddcdb37afb)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The class-native override is undoing the dependency that distutils-base
added which we require. This patch adds in the missing dependency manually
to ensure the build functions correctly.
Fixes [YOCTO #4502].
(From OE-Core rev: ae28ee3f7a060b9e0d13154a84f2444a98490b5b)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was transferred un-intentionally when we split the rpm code,
the base-files then layed down additional files (specificaly /etc/mtab)
in the initramfs image and caused problems for the installer code.
Removing the RDEPENDS will fix the image generation issue and thus
the installer, so we will need to revert a previous patch that attempted
to fix the earlier issue #4229.
[YOCTO #4504]
[YOCTO #4229]
(From OE-Core rev: 6861eb34e903c5ddf491eca04011b2219fe14267)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The common init script links use two-digit sequence numbers and
systemd interprets everything behind the two-digits as service name.
This leads to the following failure during boot:
Cannot add dependency job for unit 9tcf-agent.service
(From OE-Core rev: e29a13bf047ce90e9e1aae953044b9cab85f9aab)
Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove older patches that have been fixed upstream, added new patch to
use the correct alias-libtool instead of ./libtool.
pkgconfig provides an internal glib library, so use it to avoid ciruclar
dependecny issues.
(From OE-Core rev: d91a43228c5ba35335a28de278194df23dcdf978)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patches are now part of upstream or no longer needed.
Added new util-linux dependency for isohybrid.
Paths updated to reflect directory structure changes.
Add CFLAGS and LDFLAGS overrides.
[YOCTO #4438]
(From OE-Core rev: 17e7ac0c5e75245d17a90e5cc49ade3d18a168ba)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie
Christopher Larson
Chen Qi
Paul Eggleton
Yue Tao
Roy Li
Li Wang
Nick D'Ademo
Upgrade Helper
Laurentiu Palcu
Hongxu Jia
Lei Liu
Paul Barker
Olof Johansson
Khem Raj
Saul Wold
Jack Mitchell
Ming Liu
Mihaela Sendrea
Zhangle Yang
Jeffrey C Honig
Phil Blundell
Jackie Huang
Robert Yang
Enrico Scholz
Lei Liu
Carlos Rafael Giani
Lu Chong
Peter Seebach
Chris Patterson
Søren Holm
Andreas Müller
David Nyström
Marko Lindqvist
Eric Bénard
Martin Jansa
Muhammad Shakeel
Jason Wessel
Ross Burton
Randy MacLeod
Hans Beckerus
Mark Hatle
Peter A. Bigot
Chunrong Guo
Mihai Prica
Joe Slater
Jonathan Liu
Bruce Ashfield
Kai Kang
Riku Voipio
Yevhen Kyriukha
Ionut Radu
Emilia Ciobanu
Gabriel Barbu
Fathi Boudra
Petter Mabäcker
Tudor Florea
Beth Flanagan
Yi Zhao
Felipe F. Tonello
Stefan Stanacar
Ting Liu
Radu Moisan
Andrei Dinu
Lukas Bulwahn
Dan McGregor
Bogdan Marinescu
Peter Kjellerstedt
Zhenhua Luo
Peter Kjellerstedt
Samuli Piippo
Marcin Juszkiewicz
Jesse Zhang
Cristian Iorga
Stefan Herbrechtsmeier