It is correct behaviours to output help and version information,
and should return 0;
When input parameter is invalid, print help information and exit.
(From OE-Core rev: 7c61daa08fa51557e0e6785e738646cb5d8de91b)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add an example device_table in the SDK under /usr/share/
(From OE-Core rev: be697e3cfa67fa61aa9ef2c9c0c75f4ed452414e)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A newer version of syslinux is required for an EFI enabled isohybrid.
This is used for the the capability to generate 3 types of ISO images,
all of which can be booted off a USB device or HDD if copied with dd.
1) PC BIOS only ISO
2) EFI only ISO
3) EFI + PC BIOS ISO
The syslinux.bbclass required a minor tweak because a few .c32
libraries require dynamic loading from the created media as of
syslinux 5 and up. This was a good time to also fix the
duplication of the AUTO_SYSLINUXMENU block.
[YOCTO #4100]
(From OE-Core rev: 17d74fbd09e377e100423e1a73b9d4ce761a21d7)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The mkzftree is needed to allow ISO images to be compressed with
minimal runtime overhead. Below is an example of the savings on a
core-image-minimal.
Before ls -l:
24117248 core-image-minimal-qemux86-64.iso
Using the mkzftree ls -l:
16777216 core-image-minimal-qemux86-64.iso
(From OE-Core rev: 808d4371939ec48ed62e0c0b6614b96d61b1f7b8)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Putting a warning at the top of do_compile is useful but not everyone reads the
file from beginning to end, so use a trap to put the message at the bottom too.
[ YOCTO #4919 ]
(From OE-Core rev: 51950fcbe4b98bdbb8b3dde88a8729e540d9609f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the future bbnote/bbwarn will be integrated into bitbake's logging, so use
those functions instead of echo directly.
(From OE-Core rev: 4933d7ae45d88090191c8ea07fd109ed34925e2d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If sed-native is built before these programs, hardcoded paths to sed-native
can end up in scripts and other parts of the system which may cause issues
if they are later used from sstate and sed-native is not installed.
To avoid this, this patch changes the global site configuration to
specify that plain "sed" is fine to be used. We need to spell this
out for gcc since it doesn't see the site files since we don't autoreconf
it. We can remove the values from libtool. We tell perl to use "/bin/sed"
since it requires a path and the system sed should be just fine for it.
[YOCTO #4971]
(From OE-Core rev: 2ec171cb188601bf18c6c2895870907024b1c52a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the MACHINE can now be specified in adt-installer.conf, in order to
install the proper toolchain and environment script for the given
machine, add a sanity checking at the beginning to make sure MACHINE is
set for the wanted architecture.
Also:
* uncomment the x86 target variables, in adt-installer.conf, in order
to have qemux86 MACHINE set, by default, and also the sysroot
installed (since it doesn't make much sense to install the toolchain
without a target sysroot);
* remove 'sudo' when creating relocate_sdk_tmp.py because the file is
created in adt-installer directory;
[YOCTO #5259]
(From OE-Core rev: 0623a0e1bd7cf0c405a0469e9f16779971c0c3b5)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, if SDK is installed in a directory that needs sudo
preivileges, the target sysroot is also installed with sudo, even though
the location is in users's home directory.
This patch reuses the ownership checking code and uses it to check if
sudo is needed for target sysroot too.
[YOCTO #5259]
(From OE-Core rev: 5acfced041477d8c272485196e87ad601a0ce5b4)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pushd is not available when system is using dash as default shell
(From OE-Core rev: ec7e738845f72888b0016340d7da636e5ec46a1b)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The changes in this commit, dc5f6c3898,
moved apt config directory from native SYSROOT to WORKDIR.
Unfortunately, Dir::Etc in apt.conf was not changed accordingly and
sources.list file could not be found during do_rootfs().
This commit fixes this issue.
[YOCTO #5241]
(From OE-Core rev: 65a2a1e1d0b0e3dcc34d47f46185f24d753b53dd)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
That is a generated file and patching it might fail, the patch already patches configure.ac
which will have the configure file regenerated.
(From OE-Core rev: daa56093de3a518b79480c90ec5124a79189bf7b)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a first in a series of patches to add items
to the nativesdk toolchain tarball.
Many of which are Yocto specific and needed to create a
rootfs with pre and post install hooks successfully run,
using only the toolchain tarball.
End goal is to create a sandbox where _users_ can customize a rootfs from a
package feed with their package manager of choice.
(From OE-Core rev: e70019bcdce83ae2a202338518f8725775abaa32)
Signed-off-by: David Nyström <david.nystrom@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Libtool scripts were finding bash was /bin/sh and then using bashisms which
then got into sstate and used on machines where /bin/sh might be dash.
This changes things to search for bash first since its preferred. We then hardcode
bash into the scripts which is more correct.
This does mean we have a dependency on bash but many of our scripts have
that anyway.
(From OE-Core rev: 367a19aaf31bcf997f10d045e7954cc800189052)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The --enable-dependency-tracking option was added to workaround build
issues in libatomic. This fixes that build problem properly and removes
the flag since the dependency tracking code appears to be full of races
which are much deeper and harder to fix.
As per the automake manual, dependency tracking is only useful and worth
the build performance cost if you are doing more than one compile of the same
source code which in most cases we are not so this is a good thing anyway.
(From OE-Core rev: a3b665a80abed4c0659925e1cceb1568af023711)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
btrfs-tools was failing occasionally due to version.h being missing. This
fixes the problems, thanks to several people on #yocto for helping out
why my lack of make knowledge of old fashioned suffix rules :)
(From OE-Core rev: 7be8010186889cece97829025d97d94f21c1f2e5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The exported SDK only needs simulated root privileges for specific
tasks, such as the user-mode NFS server or rootfs extraction, and
oe-core does not support multilib builds in the generated SDK, so
it is neither necessary nor possible to build a 32-bit libpseudo.so
for a 64-bit SDK.
[YOCTO #5135]
(From OE-Core rev: 908b179b798704db74c886ec4c70c0942b09cb00)
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* temporary work around for build issue on armv4t:
| cp/decl.o: In function `bad_specifiers':
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7171:(.text.unlikely+0x24): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7173:(.text.unlikely+0x32): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7176:(.text.unlikely+0x3e): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7180:(.text.unlikely+0x4c): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7182:(.text.unlikely+0x5a): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7185:(.text.unlikely+0x66): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7189:(.text.unlikely+0x74): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7191:(.text.unlikely+0x82): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7194:(.text.unlikely+0x8e): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7198:(.text.unlikely+0x9c): relocation truncated to fit: R_ARM_THM_CALL against symbol `error(char const*, ...)' defined in .glue_7 section in linker stubs
| gcc-4.8.0-r0/gcc-4.8.0/gcc/cp/decl.c:7200:(.text.unlikely+0xaa): additional relocation overflows omitted from the output
| collect2: error: ld returned 1 exit status
| make[2]: *** [cc1plus] Error 1
(From OE-Core rev: 148c7e990831ed708f7fb064ec8f05657a323850)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the mouse pointer enters the qemu window it takes a pointer grab. This
doesn't sound too dangerous at first but it turns out that SDL will infinitely
busy-loop if it can't get the grab (e.g. if the screen is locked) and the
average autobuilder setup's X server will have locked the screen a few minutes
after boot.
The result is that on many autobuilders apparently random qemu instances (the
top-most one under the pointer) will hang during boot.
To resolve this add an option (via an environment variable) to never attempt a
grab. The default behaviour remains to grab so that everyone else doesn't see
any change.
(From OE-Core rev: a60b1ebbb8f81245f3ccf25b3f9d63677de75b85)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building cmake for native, we don't use the system libraries and
thus cmake builds its own internal version of libarchive; this requires
zlib, bzip2, and e2fsprogs. We can add to DEPENDS for the two former
libraries and patch out the latter.
(From OE-Core rev: fe6ca47a256b775e1aa5750b9dd31e27230cf781)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch updates libtool.m4 (and its output) to resolve a problem
with variable 'lt_sysroot' not being properly updated if the option
'--with[-libtool]-sysroot' is not provided when running the 'configure'
script for a package.
According to the help text ouput from 'configure':
--with-libtool-sysroot=DIR Search for dependent libraries within DIR
(or the compiler's sysrooot if not specified).
Due to mixed up cases in a switch statement, when checking if the option
was specified or not, wrong actions were taken resulting in an incorrect
sysroot and failures to properly locate e.g. .la files when using the
populated SDK toolchain.
For current upstream status see:
http://lists.gnu.org/archive/html/bug-libtool/2013-09/msg00005.html
(From OE-Core rev: f5cf7e1a5c85fb320faa9cbeef24f491706b4c1d)
Signed-off-by: Hans Beckerus <hans.beckerus at gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a "File name too long" error when len(TMPDIR) = 410, this is
because the function getLocalPath() converts the filepath into the
filename, so there would be the error when len(filename)
> NAME_MAX, truncate the filename to meet NAME_MAX will fix the problem.
[YOCTO #5201]
(From OE-Core rev: 9f0427edee6bf62d3fe7cdceb07f59a5776c8c4f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The update is needed to support generation of EFI boot images that
work with optical media. Specifically the "-eltorito-platform efi"
capability for mkisofs is needed.
[YOCTO #4100]
(From OE-Core rev: aaa85b0706197423786dfeae386dbb402ee15684)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
vala-native builds were working because most systems have
bison installed on the host. Add an explicit dependency on
bison-native since bison isn't a sanity checked host tool.
(From OE-Core rev: 4bcc087290661544dd5f6466d2d6ab74488f34ec)
Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch redhat-portability.diff causes this issue
so lets revert the portion which was using %a instead of %m
thats recommended anyway, redhat patch seems to be targetting
old compilers.
(From OE-Core rev: c1cbc57eb80d2cab9a80d5e5aa65419f40eefb15)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is from the Anjuta integration which was removed many years ago.
(From OE-Core rev: db488bf8130dba2ad8771b0634e3c5de452f23f2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I mistakenly named the allarch opkg repo the same as nativesdk one...
This patch fixes it.
[YOCTO #5181]
(From OE-Core rev: 98f39b0ae4ed45194a165de3913f27745481cb7a)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we have a hierarchy of pkgdata directories and the code has to put together
a search path and look through each in turn until it finds the data it needs.
This has lead to a number of hardcoded paths and file globing which
is unpredictable and undesirable. Worse, certain tricks that should be
easy like a GL specific package architecture become problematic with the
curretn search paths.
With the modern sstate code, we can do better and construct a single pkgdata
directory for each machine in just the same way as we do for the sysroot. This
is already tried and well tested. With such a single directory, all the code that
iterated through multiple pkgdata directories and simply be removed and give
a significant simplification of the code. Even existing build directories adapt
to the change well since the package contents doesn't change, just the location
they're installed to and the stamp for them.
The only complication is the we need a different shlibs directory for each
multilib. These are only used by package.bbclass and the simple fix is to
add MLPREFIX to the shlib directory name. This means the multilib packages will
repackage and the sstate checksum will change but an existing build directory
will adapt to the changes safely.
It is close to release however I believe the benefits this patch give us
are worth consideration for inclusion and give us more options for dealing
with problems like the GL one. It also sets the ground work well for
shlibs improvements in 1.6.
(From OE-Core rev: 1b8e4abd2d9c0901d38d89d0f944fe1ffd019379)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[ YOCTO #3723 ]
Add a mode to smart that will allow an installation to continue, instead of
failure in the case that one or more items is uninstallable.
Uninstallable packages are simply ignored, and no error is generated.
(From OE-Core rev: bdf07b1698d228dc7ff555199a269b1ff8ceca19)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 637e0484ea4e7a39ac4d9c407c585201e6be1bc0)
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, adt-installer allows only the installation of qemu target
sysroots.
The changes in this patch do the following:
* add a new setting in adt-installer.conf (YOCTOADT_TARGET_MACHINE) for
each target architecture. For example, for arm we can choose to use a
qemuarm sysroot or a beagleboard sysroot. By default, only the qemu
target sysroots are selected (current behavior);
* change adt_installer scripts to allow installing the correct
meta-environment package for the selected machine;
* remove some left-over commented lines;
* use packagegroup-cross-canadian-${MACHINE} when installing the cross
canadian packages instead of doing it separately for each package;
* change the opkg config files in order to be able to find the
packagegroup package, which is allarch;
[YOCTO #4783]
(From OE-Core rev: 02085d410bf734e833d45293f4d5b06bb9536a60)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apparently, when opkg/dpkg and run-postinsts are installed in the same
time, opkg/dpkg postinstall overwrites the run-postinsts link in rcS.d.
This will make run-postinsts script useless and the delayed postinstalls
will not be run.
This issue happens only when 'package-management' is disabled and, in
the same time, dpkg/opkg ends up in the image: either pulled by some
dependency or manually installed.
With this patch, both opkg/dpkg and run-postinsts scripts will run but
the former will silently fail because the package metadata is removed from
the image since 'pacakge-management' is disabled.
[YOCTO #4484]
(From OE-Core rev: 882da38f226acc40c041155218549edad461b7d7)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add packaging for libgfortran and libquadmath as well as tweak the packaging
for libmudflap since it was broken.
(From OE-Core rev: 8a726d14a345ef35c6d8d8e369bf3691cee879bf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu.bbclass adds PSEUDO_UNLOAD=1 in qemu_run_binary to avoid reference to
pseudo functions that may not exist in the target environment. This patch
detects the addition of that variable within the environment to which the
call applies, even if not present in the parent environment.
As a side effect it fixes a memory leak.
[YOCTO #4843]
(From OE-Core rev: 9ea32ef507c914f906b3dcc0bb29813a4e0dacba)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The create_wrapper functions of utils.bbclass cause implicit
dependencies on bash, which may not be suitable for deployment on
target. Besides, the wrapper doesn't seem to be necessary on target.
(From OE-Core rev: 2ca72d35e839a0fa24d33bf75343f187792f4e2c)
Signed-off-by: Olof Johansson <olofjn@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do-autoreconf patches only change generated files. We run autoreconf ourselves
so we don't need these patches. Worse, they cause failures since the do_patch
task can't rerun after configure since the files change and the patch is no longer
clean.
Drop the patches since we don't need them.
(From OE-Core rev: 37e9a01d38892e8a6fd225854e5b8cc332a5f2ea)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These have been deprecated for a long time, convert the remaining
references to the correct modules and prepare for removal of the
compatibility support from bitbake.
(From OE-Core rev: 6a39835af2b2b3c7797fe05479341d71a3f3aaf6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are back ports of 2 patches from upstream to address
CVE-2011-4944
CVE-2013-4238
(From OE-Core rev: 4606eab53e8eff57d6369ea20a5ea63916ea3ea7)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These patches are backported from upstream since it might be risky to update right now
They address the following CVEs
CVE-2012-6329
CVE-2013-1667
(From OE-Core rev: b6c286c447e50fe499f03b64c6be80ac18504265)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add dependency on lzo acl e2fsprogs to fix the below building failure
1. commit b268a417259b9[add lzo compression support to restore] needs lzo
cmds-restore.c:30:25: fatal error: lzo/lzoconf.h: No such file or directory
2. btrfs-tools includes <sys/acl.h> which is provided by acl
btrfs-convert.c:32:21: fatal error: sys/acl.h: No such file or directory
3. btrfs-tools always needs e2fsprogs
btrfs-convert.c:44:28: fatal error: ext2fs/ext2_fs.h: No such file or directory
(From OE-Core rev: 51bb56a19f03e341a0b46199dddbbc3e9b209904)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* http://gcc.gnu.org/bugzilla//show_bug.cgi?id=57717#c7
* fix the segfault issue of dd on e500v2 targets
Since double-float is disabled for e500v2 targets build due to ICE of gcc-4.8.1,
accordingly %Ld format of sprintf is disabled.
Address Bug 4910 - [p1022ds]urandom: segmentation fault
(From OE-Core rev: a4fefac26d91bc56d5d28e1c9973a189d2509d45)
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's not necessary to specify the protocol parameter when it's the
default protocol for the fetcher, e.g. the default protocol for
git fetcher it git, "protocol=git" isn't needed.
(From OE-Core rev: a2bab241c64428d5109c3c5ac5de4463fbad70c5)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Docutils is a text processing system for processing plaintext
documentation into useful formats(HTML, XML, man-pages). This is
required by the Midori web-browser.
* Update 0.5 from meta-oe to 0.11.
(From OE-Core rev: 1bc1ff887c29376bb0d05beee1bbc2cf25b08419)
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Vala is a C#-like language dedicated to ease GObject programming.
It is required by the Midori web-browser.
(From OE-Core rev: 649b48557d8702daaf4f28482848ab0b07abed83)
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CQID: 431771
configure cannot determine the proper cpu, os, or
architecture for mips64, and possibly other arch's,
because of faulty code added to Arch.pm in the latest
release from upstream. We remove that code.
(From OE-Core rev: e56b4af3a325d6d5332c779e6253da9b3cd2fce0)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some platforms its useful to be able to configure LTO so provide a variable
to allow this to happen.
(From OE-Core rev: e4582a51a2500ad3b418e53170f5fb6b2cbd98a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This script is originally from Darren Hart, it will be used for creating
the ext* filesystem from a given directory, which will replace the
genext2fs in image_types.bbclass at the moment, we may use the mke2fs to
replace this script again when it has the initial directory support.
Changes of the script:
* Rename it from mkdebugfs.sh to populate-extfs.sh
* Add a simple usage
* Add checking for the number of the parameters
* Add the "regular empty file" and "fifo" file type
* Set mode, uid and gid for the file
* Save the command lines to a file and batch run them
* Change the error message
* Improve the performance
* Add the support for hardlink
[YOCTO #3848]
(From OE-Core rev: 265f91149aa8c475ebe5b7069044ed94b7857fa9)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
do_write doesn't fully set up the first extent header on a new
inode, so if we write a 0-length file, and don't write any data
to the new file, we end up creating something that looks corrupt
to kernelspace:
EXT4-fs error (device loop0): ext4_ext_check_inode:464: inode #12: comm
ls: bad header/extent: invalid magic - magic 0, entries 0, max 0(0),
depth 0(0)
Do something similar to ext4_ext_tree_init() here, and
fill out the first extent header upon creation to avoid this.
[YOCTO #3848]
(From OE-Core rev: 7d1e51681d25f6e6d2c20744825723ad5c83861c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We only read the cache when:
bufsize == sizeof(struct ext2_inode)
then we should only update the cache in the same condition, otherwise
there would be errors, for example:
cache[0]: cached ino 14 when bufsize = 128 by ext2fs_write_inode_full()
cache[1]: cached ino 14 when bufsize = 156 by ext2fs_read_inode_full()
Then update the cache:
cache[0]: cached ino 15 when bufsize = 156 by ext2fs_read_inode_full()
Then the ino 14 would hit the cache[1] when bufsize = 128 (but it was
cached by bufsize = 156), so there would be errors.
[YOCTO #3848]
(From OE-Core rev: ad8452196c5b1a54c14fd00bbf421f68aea65186)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Let debugfs do sparse copy when src is a sparse file, just like
"cp --sparse=auto"
This patch has been reviewed by the linux-ext4 mailing list, but isn't
merged atm.
[YOCTO #3848]
(From OE-Core rev: 723adaf8fbba61b7f1adc8e4a13ddf1cfb5c0bcf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The max length of debugfs argument is 256 which is too short, the
arguments are two paths, the PATH_MAX is 4096 according to
/usr/include/linux/limits.h, so use BUFSIZ (which is 8192 on Linux
systems), that's also what the ss library uses.
This patch has been reviewed by the linux-ext4 mailing list, but isn't
merged atm.
[YOCTO #3848]
(From OE-Core rev: a916a127768291ca7c614976e05c90153fec2956)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Uprev guilt to the latest guilt version from its upstream repository.
As part of the uprev all of the previous changes required for the
yocto kernel tools to use git to manipulate series files have been
dropped. These changes were specific to circumventing parts of guilt's
internal santiy checking to allow specific Yocto kernel manipluation
of sub-series files.
Since the kernel tools no longer need guilt, we can use an up to date
and nearly pure upstream version of guilt.
(From OE-Core rev: 595c4469adc36d88ba2403915fc6c1d355014a58)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
See the patch headers for more information about the cross-canadian build failures
these patches avoid.
(From OE-Core rev: 2bae60b8a3cb7783c06e35a2962e56110e876957)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were darwin8/darwin9 overrides spinkled in the code from times gone
by. Lets settle on the darwin override and remove the others since its pointless
duplication. We always inject darwin into OVERRIDES if needed in the darwin8/9
cases.
(From OE-Core rev: 8d5e6eed7802a6056f9eaa50a85e3eee00fe2742)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove the duplicate EXTRA_OECONF_PATHS that is overwritten
* Merge the do_compile and do_compile_prepend
* Group dependency and configuration variables together
(From OE-Core rev: 430b1d6fcbf60df35036fe5bbf8e55f7fb8f5341)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This also has the advantage of removing the confusing sdk naming which
has been purged everywhere else in favour of cross-canadian.
(From OE-Core rev: cbb63ca9e7e6d397198808e862f812f1012c74a7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hardcoding -nativesdk as the sdk package architecture is inflexible. We may have
multiple different target OS and we need a way to be able to separate them. Turning
this into a configurable value allows the flexibility we need to build different
SDKMACHINEs with different OS targets.
The commit should have no behaviour change, just makes things more configurable.
(From OE-Core rev: a2110e86b98d646e136de9ec6b8e668079b0d4f4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This removes duplication and follows the pattern of the other gcc recipes.
(From OE-Core rev: 3296c896f5a5ef7dd50ab4e00ddbf1c2476462dc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some SDK platforms have elfutils support, some do not, therefore allow
this to be configured.
(From OE-Core rev: 717e940d2c2beccfda31dda16a2d0d6d9a495042)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The include was useful historically, its not anymore so lets remove it.
This should have no functional change except on any layers directly depending
on it or gcc-cross.inc but even then it would only impact sh4 and is easily
fixed if there was a problem.
(From OE-Core rev: e7e8fe11c34bf05179f3bbaa2fb1af7b7125696a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I don't understand why we're building the target libgcc in the canadian-cross build
since it should have been built elsewhere. The compiler configuration isn't correct
to build a working target libgcc in all cases anyway.
To avoid various weird build errors, stop building it.
(From OE-Core rev: b0d1ab6242b6ce2bcdd0e4e3e61600344fcd2907)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On platforms like windows, executables have extensions. Whilst I'm not proposing
we wholesale support windows extensions, this small tweak allows a cross compiler
targetting mingw to be built which does seem like a good use case.
The patch therefore adds an EXEEXT which the mingw layer can set for the libexec
symlinks.
(From OE-Core rev: 8dcf0d95b654fa6cc56193168aaa744052ad8ffc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We already use relative links for other gcc libexec links, this changes the sdk
do_install to match elsewhere and use relative symlinks too. This makes things
slightly easier in the SDK installation process and standardises.
(From OE-Core rev: ecfa1141e731224cc5a099f8dfd22878f23359ec)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This disabling of PARALLEL_MAKE has been forward ported for gcc-cross-canadian
since at least 2009-09 and gcc 4.3.3, probably older.
I've tested this with high values of parallel make and it all seems to work and
we usually build gcc with parallel make so it seems unlikely there are issues.
Lets therefore enable it.
(From OE-Core rev: cee90d230899eb1255d586e6ee4fad0d94348cfd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds a new argument to opkg-cl, --add-exclude, which is
used to add package names to the list of packages to exclude
from the install.
If an excluded package is needed for the install to resolve,
an error will be generated. Recommended packages will not
generate an error.
(From OE-Core rev: 63c61b7c0c8aeb89661e3bb85e281dd1ef5b618c)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new --no-install-recommends option is similar to the behavior of
apt-get's --no-install-recommedns. Only required packages will be
installed.
(From OE-Core rev: 86a30a88cf89ed97c372c391169f4ae243c89fd2)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to attempt to reduce image sizes by skipping recommended packages,
a new mode was added to smart that only evaluates required packaged.
(From OE-Core rev: 6fd8141bbdcd84c591149d84ad84effc2357de72)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update smart to support a mechanism for excluding specific packages from the
install process. An error will be generated if this package is required.
(From OE-Core rev: 87660d636c2ebe76cd9dff2a334f135def9a0cf3)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sync to latest cross-prelink, as of Aug 1, 2013.
Drop the PR number, no longer needed.
(From OE-Core rev: b59d256349cc0ac19357158be8e63bd52ab9fb51)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Compared to hard coding the numeric group and user ids in the device
table files, the way of using user/group names is preferred.
This patch adds the ability to makedevs to correctly deal with device
table files with user/group names in them.
To maintain backward compatibility, the way of using uid/gid is still
supported.
[YOCTO #1159]
(From OE-Core rev: 1fcf718e3a1e50446ab61972069566e5016bc625)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the current implementation of postinst logging mechanism, the
location for log file is configured via the POSTINST_LOGFILE variable.
The POSTLOG variable is obsolete now, thus removing it.
(From OE-Core rev: 6aaf2d5c51eb4ee6acbb85fd4aa5f44406907bc2)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should not skip it always since same recipes provide
qemu-native too so user class-target override to make it
only skip for target recipes
(From OE-Core rev: 23d633cc65cf31486263f120c71df82186cfdd22)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Build dpkg-native on Fedora 19, it fails with:
/usr/include/c++/4.8.1/cstdlib: In function ‘long long int std::abs(long long int)’:
/usr/include/c++/4.8.1/cstdlib:174:20: error: declaration of C function ‘long long int std::abs(long long int)’ conflicts with
abs(long long __x) { return __builtin_llabs (__x); }
^
/usr/include/c++/4.8.1/cstdlib:166:3: error: previous declaration ‘long int std::abs(long int)’ here
abs(long __i) { return __builtin_labs(__i); }
^
That because header cstdlib is included in a 'extern "C"' block that gcc
4.8 doesn't support. Fix it by move the header file out of the 'extern "C"'
block.
(From OE-Core rev: 7de61ecc3efc43c625dde9a66f5c05e980a82e34)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
opkg is GPLv2+ licensed but it has optional support for sha256 checksums which
was GPLv3+ licensed. This code is not built unless '--enable-sha256' is passed
to the configure script, the default is equivalent to '--disable-sha256'.
However, the header 'sha256.h', which is GPLv3+ licensed, is in the list of
header files to be installed and thus could end up in the libopkg-dev package.
As this header is installed to '/usr/include/libopkg' it is very unlikely that
it will ever be used. However, if you're uncomfortable with GPLv3 code going
anywhere near your target filesystem you won't want this to happen.
The simplest solution is to replace the sha256 implementation in opkg with the
implementation from coreutils-6.9 which is licensed under GPLv2+. This is
committed to the opkg subversion repository as r652/r653.
The only intervening commit between r650 (previous SRCREV) and this is r651,
which integrates 'obsolete_automake_macros.patch' into the opkg sources. Thus
this patch isn't needed in oe-core anymore.
(Note: Before 873689bbabba25e7be5c12317c04519a7bc8d0ef, this header is only
installed if opkg is built in its source tree (ie. ${B}=${S}). After that commit
the header will always be installed)
(From OE-Core rev: 3c6a8a39d820f14f9eb3df3d719cef2c469769da)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some LSB packages appear to have the platform set to '%{_target_platform}'
which is not a valid platform field. This causes a failure of the type:
warning: package lsb-test-core-4.1.15-1.x86_64 is intended for a %{_target_platform} platform
When we detect an invalid platform, fall back and try to construct a new
platform name that may be valid based on the arch and os contents of the
package. (This should only ever be needed by invalid or older RPM packages.)
(From OE-Core rev: 6513fa327aeb7e9fdd313290c205917952eed226)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change the #define references to match RPM_VENDOR_OE.
(From OE-Core rev: a84ecc5ad158a7529a904785de25ebfedf5767a7)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed for x264. Enabling it for libav also improves performance
on x86 and x86-64. Two minor changes from the meta-oe recipe:
* Set SUMMARY instead of DESCRIPTION
* Drop setting of S - it was setting it to the same as the default
(From OE-Core rev: 2619c81d6641ef5d4dee58c128a1af140429c248)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE carries a patch to pass CFLAGS to qemu. However, we can avoid
patching by passing CFLAGS with qemu's --extra-cflags option.
Tested that building qemu-native still works without zlib-dev
on host, and that qemu builds.
(From OE-Core rev: 67b6d8d9f987a59090a9a8af61cf740207703dff)
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The neon update is not recognized but subversion, so we need to patch the configure.ac
to know about 0.30, otherwise we don't have http/https support in subversion.
(From OE-Core rev: 291ab168fac15eae0e4c9234e16f394b0e1547a0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two patches were removed because changes that they provide are already exist.
(From OE-Core rev: 6de68622c0658e1bba509c66c137eb419cdbdabf)
Signed-off-by: Yevhen Kyriukha <kirgene@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should fix the problem seen where gcc ICE
was happening when compiling iperf with older 2.6.x
kernel
Test this patch by reverting below commit in meta-fsl-arm
commit daf582c93a7283fb0af3b25fe2ada48f4c9985c4
Author: Otavio Salvador <otavio@ossystems.com.br>
Date: Tue Jul 2 11:52:51 2013 -0300
perf: Disable FPU tune for i.MX5 SoCs to workaround GCC ICE
(From OE-Core rev: 8ab1d16b6c6d946b625b6872e5d0f155206f4bad)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
CC: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rebased patches and removed mips related arch triptlet patch due to being upstreamed
(From OE-Core rev: 6d4257217f8c5c61ae9bc02b6607d1066168c03a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
makerace.patch: adapted to the new version
(From OE-Core rev: ad69f62e42c131dcccd33b0e39c61a431f581bea)
Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed patches since they were included upstream.
Added a patch to not compile flex.pdf doc since it needs texi2dvi.
(From OE-Core rev: bed86662efdd73be2a0dcde217d44be8e00c0822)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
[sgw - Dropped PR]
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous patch to fix the installation of libopkg headers has been accepted
upstream and is the next commit after the SRCREV used by the opkg recipe.
Therefore the patch can be replaced by a simple update of the SRCREV.
(From OE-Core rev: e14df11795a03da4bb36f5172edbf9ca7e8ba681)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The REDIRECT_CMD variable is now obsolete, remove it.
(From OE-Core rev: cba8f3257bb645dafdfa7c672bbdc4b0f0c094e6)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If one specifies a relative target sysroot path, then he/she must always
be in the same directory in order to be able to compile.
With this patch, adt_installer will automatically convert user
supplied relative paths to absolute.
[YOCTO #4955]
(From OE-Core rev: 1abf13cb035fa9e02f0c6a1c6f3524b649d2a701)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is for Yocto bug #4920. The NO32LIBS variable is intended to allow
the user to force the creation of a 32-bit libpseudo, for use with things
like prebuilt binary toolchains. Unfortunately, the tests for likely
compilability (stubs-32.h) were still present, so you would get silent
failures. And if you did cause it to try to build, the failures were not
particularly clearly explained.
So, we:
1. Emit at least a message during configuration saying we're only
building 64-bit, if we are.
2. Warn the user for at least one common case where we know builds
are likely to fail.
3. If NO32LIBS is 0, we try the compile for sure, and if it fails,
we've emitted at least some sort of message up near the top of the
compile output that tells you what might be wrong.
(From OE-Core rev: 22548b3243dfa2dc9861b0f15530632b37812a8c)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Package recipe should contain version token in its name.
(From OE-Core rev: 6d4e71b72aee4cf03bc93d2143e6a6b67bf6cfee)
Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Package recipe should contain version token in its name.
(From OE-Core rev: c3c424b447ed4ad46263ef379b7e8892f3974821)
Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds support for a flag that is saved into Smart's configuration against
a package that says it should not be installed if it is only recommended
by a package being installed rather than required. This will enable us
to add BAD_RECOMMENDATIONS support for RPM.
(From OE-Core rev: 70517fca31261c1ca4b15bb38f8960b2f95993ba)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a requirement of a package is conflicted, depending on how the
solution is reached, Smart's transaction code may eliminate all
providers of the requirement and then error out because nothing provides
them without saying why. To work around this, store a reason and report
that back if we need to, so for example instead of:
error: Can't install packagegroup-core-ssh-dropbear-1.0-r1@all: no package provides dropbear
we will now get:
error: Can't install packagegroup-core-ssh-dropbear-1.0-r1@all: unable to install provider for dropbear:
error: dropbear-2013.58-r1.0@armv5te is conflicted by openssh-sshd-6.2p2-r0@armv5te
Fixes [YOCTO #4305].
(From OE-Core rev: 1ed09b87fc8780d4a99f6516493fae2e0c92862c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install strace test suite and run it as ptest.
(From OE-Core rev: 6e2d8724b023e2b6b55db7845009b4422a53c3b3)
Signed-off-by: Gabriel Barbu <gabriel.barbu@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the postinsts of rpm, deb and ipk are all handled in the one
central place, run-postinsts.bb, the rpm-postinsts.bb recipe is actually
obsolete now. Remove this recipe to avoid confusion.
(From OE-Core rev: 308185c215b8dd969d1230e52444ce3c11fc2c57)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu packages can NOT be built for mips64, Set COMPATIBLE_HOST to null to
block build them for such platform.
(From OE-Core rev: 239d46d9060ee4f30da4f7633377639283f16453)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it's autodetected from sysroot
* add PACKAGECONFIG to make it deterministic
(From OE-Core rev: c11aaac4952320f565bd65ec5f601c50763408a7)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it's autodetected from sysroot
* add PACKAGECONFIG to make it deterministic
(From OE-Core rev: 2eb394b6111a7df730e38604e8efe8bce5c1653a)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it's autodetected from sysroot
* add PACKAGECONFIG to make it deterministic
(From OE-Core rev: 04f100e7dacc4b78c764a8ec5cedc1b1b4b1c285)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* when it's not detected in sysroot it uses bundled version
* add explicit dependency to make it deterministic
* PACKAGECONFIG wasn't used because configure doesn't have an
option to select which one should be used
(From OE-Core rev: 71efa24f0acd3d38d3223ca9811399eeaf8126e4)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When all postinsts scripts succeed at system startup, it's very possible
that the log file /var/log/postinstall.log is empty. This is kind of
confusing, as that file is supposed to hold information about the postinsts.
Add more logging to the log file to make things clearer.
(From OE-Core rev: d60926b3fc4ba5780aef5b5226d05170892a7133)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The run-postinsts script also handles the #SYSCONFDIR#/rpm-postinsts
directory. Add it to the comment for clarity.
(From OE-Core rev: ca32f9c3f7749aa31d1ea83eda1ca39a2678215b)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libtool is picking up libstdc++.so from /usr/lib when trying to link
libasan due to libstdc++.la containing libdir="/usr/lib". If compiling
for x86 and the host has 64-bit /usr/lib/libstdc++.so, the compilation
fails linking libasan with:
/usr/lib/libstdc++.so: could not read symbols: File in wrong format
To resolve this, patch libtool to look for the library in the path the
.la is contained in rather than use the libdir which usually points to
a host path.
[YOCTO #4879]
(From OE-Core rev: ec95dfeea1f17eb232563e105085852058a86c0b)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default when inheriting gettext, "gettext-minimal-native" is added as
a dependency for native. The bb-file for remake use 'autopoint' (not
included in gettext-minimal-native). When building remake-native it
will result in a failure in do_configure for all cases when gettext (or
gettext-native) is not build from some other recipes, before building
'remake-native'.
This is solved by adding a build-dependency to gettext-native in
remake-native.
Fixes [YOCTO #4385]
(From OE-Core rev: 4bd98157f1d7a96741d036e67b04819ccbc9a9c6)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Install python test suite and run it as ptest
(From OE-Core rev: a768047cb8fc00ecf13f4db08117c348a9312c47)
Signed-off-by: Tudor Florea <tudor.florea@enea.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is necessary since the valgrind package depends on /usr/bin/perl.
This patch will fix this error while installing into rootfs:
Computing transaction...error: Can't install valgrind-3.8.1-r8@armv7a_vfp_neon: no package provides /usr/bin/perl
(From OE-Core rev: 9b21846ed8ae0fcd7b1d81d026cb03644ca7c1f7)
Signed-off-by: Felipe F. Tonello <eu@felipetonello.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Old way find -perm +mode is no longer supported in newer
versions of find (Fedora 19). Man page says:
-perm +mode
This is no longer supported (and has been deprecated since
2005). Use -perm /mode instead.
[YOCTO #4853]
(From OE-Core rev: 21b079e01873e2fb4d8674541e8c5818ba73554e)
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix typo of upstream status in tcl-remove-hardcoded-install-path.patch
that may cause some scripts out of work. Fix it.
(From OE-Core rev: 0931eead0f874112836926dd493c9f47b3edbd16)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes the issue where g++ is not able to
find C++ headers when sysroot is '/'
The patch needs to be upstreamed into gcc as well.
[Yocto #4812]
(From OE-Core rev: 18537025ca8777a45cb24f1d9ee781323695607a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
QEMU uses the environment variable LIBTOOL by default. We want to ensure
we set it to the proper libtool version, instead of letting it default to
the host system version.
This corrects target building, and ensures we're linking properly for
native and nativesdk versions.
(From OE-Core rev: b91d65fc78c18948ed4ec96f34b85c431dbc3d95)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename recipe to match upstream tarball name which requires a fix the the SOLIBS numbering
(From OE-Core rev: cd749a50eb7dcdb735b5f7bd8b7e15f709e0a38e)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the host Qt installation exists but is incomplete or the installed
qmake architecture doesn't match that of the Qt libraries, cmake was
failing at do_configure. cmake 2.8.10 failed silently here so we should
make 2.8.11 do the same.
Fixes [YOCTO #4565].
(From OE-Core rev: 2bf46fbd25e1a3a44d556758f536fa26c44edb03)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move to using the PACKAGECONFIG mechanism to select configure options
and dependencies. Without this the system will attempt to discover
various dependencies, and sometimes does so incorrectly.
(From OE-Core rev: 8438bbe210de6f565f842d745ccede131fa385db)
Signed-off-by: Ting Liu <b28495@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
*license changed to GPLv3
*several patches were absolete so I removed them
*redhat-portability & redhat-robustify backported from
latest elfutils-portability & elfutils-robustify from
upstream
(From OE-Core rev: 6edbaf14f875b7759672e8d118c59a01dbdeb853)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The project has switched to using git for version control.
(From OE-Core rev: 8a9a476c03a3bc2782206799933d92e216032ff7)
Signed-off-by: Emilia Ciobanu <emilia.maria.silvia.ciobanu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should fix sstate relocation issues with debugedit failing during
do_package on the Yocto Project autobuilder.
(From OE-Core rev: b7c2e01753e4a09388a3282e534bcbd163cd6ef7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is now required by python-argparse-native as of OE-Core revision
8d0e84bdfaf63ad61be7b015dd55dacccfa9132c.
(From OE-Core rev: e9e03d44d6a402fecdf0d62ff09a1f6af9da10bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is used by buildhistory-diff and the OE layer index, and thus will
be useful in the context of the build appliance and buildtools-tarball.
(From OE-Core rev: 449ae5a70bc7d7d08f99de7d272b4cc3c83c3dcc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is required by python-git.
(From OE-Core rev: bcbb34c26a235a103b46aa5c8ae7b3896904a215)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is required by python-gitdb.
(From OE-Core rev: 37890014f406ca2ab24e0ec918af39613642afa0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is required by python-gitdb.
(From OE-Core rev: 31bc9fa8d53110a09ca048039d83213b34f4b7e4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As python-multiprocessing requires python-threading and
python-pickle, this commit adds them as runtime dependency.
The observed behavior was:
When typing 'import multiprocessing' in the python shell on a
minimal image with only the python-multiprocessing recipe installed,
python reports at first:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/multiprocessing/__init__.py", line 65, in <module>
from multiprocessing.util import SUBDEBUG, SUBWARNING
File "/usr/lib/python2.7/multiprocessing/util.py", line 38, in <module>
import threading # we want threading to install it's
ImportError: No module named threading
After adding python-threading as runtime dependency and rebuilding
the image, python reports:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import multiprocessing;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/multiprocessing/__init__.py", line 84, in <module>
import _multiprocessing
ImportError: No module named cPickle
(From OE-Core rev: e913412ca0ff01cb654757c8199e8859f15b7cf7)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When typing 'import argparse' in the python shell on a minimal image
with only the python-argparse recipe installed, python reports:
Python 2.7.3 (default, Jun 27 2013, 08:26:25)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import argparse;
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/site-packages/argparse.py", line 91, in <module>
from gettext import gettext as _
ImportError: No module named gettext
The python-argparse recipe requires the python gettext module,
which is currently provided by python-codecs.
Hence, this commit adds python-codecs as runtime dependency to
resolve the issue.
(From OE-Core rev: 8d0e84bdfaf63ad61be7b015dd55dacccfa9132c)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename patches to make them easly to apply with git
(From OE-Core rev: 040a55d0b730bf78aad0f51e0018faa88655e279)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the user doesn't have rights to access the installation directory,
the sdk installation will fail, add sudo to fix this.
[YOCTO #4760]
(From OE-Core rev: 040010d04672c93f18d60308ecf3c26a26ec5fd3)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When run "autoreconf" in toolchain, there is an error if the host's perl's
version is not the same as the one in the SDK, the error says that the
executable perl mismatches the perl lib's version.
This is because most of the autotools' scripts use the "#!/usr/bin/perl -w"
which is host perl, but the gnu-configize uses "#! /usr/bin/env perl" which
invokes the perl wrapper in the SDK, and the wrapper will set the PERL5LIB to
the SDK which causes the mismatch. We can make all the perl scripts to use the
host perl or the SDK perl to fix this problem.
[YOCTO #4758]
(From OE-Core rev: 487d1fa7b79e89518494986461c157bace842613)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The perl module for automake has an embedded path in it, this needs
to be relocated.
Older versions of 'file' do not return the "ASCII" text in the output for
a perl module file. Hence, the regex pattern didn't match perl module and
they were not getting relocated at all on older distributions.
1) On CentOS release 6.4, the version of file is 5.04
$ file /usr/lib/perl5/Config_heavy.pl
$ /usr/lib/perl5/Config_heavy.pl: Perl5 module source text
2) On Ubuntu 13.04, the version of file is 5.11
$ file /usr/lib/perl/5.14/Config_heavy.pl
$ /usr/lib/perl/5.14/Config_heavy.pl: C source, ASCII text, with very long lines
[YOCTO #4550]
(From OE-Core rev: 7cfab2c895bf4daa7716fb7509e367bf74f016e4)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Spaces are not handled properly in some parts of oe-core and it's safer
to abort toolchain installation if path contains spaces. Even though
we fix space handling in the toolchain installation script, there are
various other parts in the toolchain (perl scripts, sysroot path passed to
toolchain binaries, shebang lines) that would need special handling. So,
for now, just bail out if path contains spaces.
The checking for spaces in the path is done after expanding relative
paths to absolute and tilde conversion.
[YOCTO #4488]
(From OE-Core rev: 8c35ba2d3048ce69f74f72cb2676e4bc162cfb63)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recently it was discovered that many Fedora hosts have a broken version of
make 3.82. Add make to the buildtools-tarball, as well ad modify make to
support building a special nativesdk version.
(From OE-Core rev: ea972fc4ce2268f01be6beeafd27dd949d800f9d)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Savannah bug 30612 describes two different issue. The first,
previously fixed, errors parsing multiple objects in parenthesis.
The second, (this issue), extra white space contained in the
parenthesis.
The fix was backported from the current make git tree:
http://git.savannah.gnu.org/cgit/make.git/commit/?id=b06b8c64a29a5ba3a8daecd829fa2f98d42cb285
(From OE-Core rev: 681b4c2cd9830cd523080aa830748d9c3367c7c9)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original fix worked some of the time, but not on all machines. Fix
this by applying the change in a different way. Following the example of
the existing BUILD_CFLAGS.
Below is the commit message from the original change to help explain why
this is needed:
Configure identifies a number of warning flags (WARN_CFLAGS and
WARN_CXXFLAGS) from the $CC value. The cross compiler may be different
from the host compiler and may not support the same set of flags. This
leads to problems such as:
cc1plus: error: unrecognized command line option "-Wno-narrowing"
cc1plus: error: unrecognized command line option "-Wno-overlength-strings"
Work around this problem by removing the warning flags from the
BUILD_CXXFLAGS value, in a way similar to the BUILD_CFLAGS.
(From OE-Core rev: be21c6e8e4f810e826538337dac6e34ed96e1f6f)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
defs.c dependes on gdk-types.defs and gtk-types.defs. When parallel
compile, it may fails with:
"IOError: [Errno 2] No such file or directory: 'gtk-types.defs'"
Add them to dependences of defs.c to fix this issue.
(From OE-Core rev: edf278eec71552bcd3ac661dce8e8b7489463f6a)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The installation of __glib.so is invoked by install-data-am target
which are generated by automake. installing libpyglib-2.0-python is
invoked by install-exec-am.
"make install" will firstly install libpyglib-2.0-python, then install
__glib.so, the sequence should not be broken, since _glib.so has
dependence on libpyglib-2.0-python. But when enable parallel install,
the sequence maybe break then installation fails with:
"/usr/bin/ld: cannot find -lpyglib-2.0-python"
Disable parallel install to fix this issue.
(From OE-Core rev: e87a0c81c77d11f892a34c2d14ffbeb4342d32dd)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix openjade-native build failure when build directory name contains the
characters ".a".
(From OE-Core rev: f005670ee8f6d02e0b0517a48b47b364f0bddf2d)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add strace configure options libaio and acl to enable or disable build
with them. Then PACKAGECONFIG can be used to handle dependency.
Set "libaio" as a default feature of PACKAGECONFIG.
(From OE-Core rev: 9b6b7973a5e49fe9cd283c5b4af31e8a7940e7b5)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update strace to 4.8:
* Update License file.
* Remove the backport patches which are already in version 4.8.
* Add file git-version-gen from git repo. Without this file configure
fails.
(From OE-Core rev: 3ae2592b40900caaebe2452c875912f82f9e5200)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unit test clock.test check the boundary year 2099 which is not
inclusive. Include 2099 to be a valide year number.
(From OE-Core rev: c6386c8661f18f6b9104c74345120a56e2330ea4)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove hardcoded library install path and then install library to
${libdir}.
(From OE-Core rev: ec06d828d8ee623b0064713583344db84496ef1e)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This backported patch will fix this Xorg issue and, probably, many
others which didn't show up yet.
[YOCTO #4737]
(From OE-Core rev: c659903841da7aa44675d2970d1b92841b91d29e)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On some overloaded hosts, shell commands of autogen may can not
finish in 5 secs. This has caused many build failures, so increase
the timeout limit to fix this.
(From OE-Core rev: 92c7a0bec3f3c9fec04a6019aa9cee395ba5a9ab)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've been using 1.5.1 for a while now with success, so in line with the
OE-Core policy of avoiding multiple versions of the same recipe let's
drop this version.
(From OE-Core rev: c26fd671466f42d76cbd99e275dc91fc322062c4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The header files for libopkg belong in the package libopkg-dev rather than
opkg-dev where they are placed by default.
(From OE-Core rev: f79cd4208340b56afc044d8e3abc72d43d395062)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When opkg is built outside the source directory, libopkg headers aren't all
installed as the search path for headers only includes the directory that make
is being ran in, not the source directory. So we fix this by adding
$(srcdir)/*.h to the list of header files to install.
Without this patch, "/usr/include/libopkg" will only include the file config.h.
With this patch, other files such as "opkg.h" are present which are needed to
compile software which uses libopkg.
The new patch has also been submitted upstream as a fix to opkg itself.
(From OE-Core rev: 873689bbabba25e7be5c12317c04519a7bc8d0ef)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if you build nativesdk-python, install it and try and run it,
you see it search in the default nativesdk path for terminfo files
when the readline module is used.
If terminfo files cannot be found, or if the ones found are incorrect,
the system may emit control characters which confuse commandline
processing.
This patch sets the TERMINFO_DIRS variable to ensure the correct locations
are searched for terminfo files, starting with the nativesdk terminfo files
and falling back to the host systtem's.
(From OE-Core rev: 682861166f39fbdcd0c9b923139faab2d40362cf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes errors in packages using python( build with gcc 4.8)
|
/home/jenkins/oe/shr-core-branches/shr-core/tmp-eglibc/sysroots/qemuarm/usr/include/python2.7/modsupport.h:27:1:
error: 'PyArg_ParseTuple' is an unrecognized format function type
[-Werror=format=]
| PyAPI_FUNC(int) PyArg_ParseTuple(PyObject *, const char *, ...)
Py_FORMAT_PARSETUPLE(PyArg_ParseTuple, 2, 3);
| ^
| cc1: all warnings being treated as errors
| cc1: all warnings being treated as errors
(From OE-Core rev: 5745a482a85c064a1eec960aff104cf8ce588e30)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a symlink to the native Python so that scripts can just invoke
"nativepython" and get the right one without needing absolute paths (these often
end up too long for the #! parser in the kernel as the buffer is 128 bytes
long).
The name "nativepython" was chosen to match the existing "nativeperl" which
serves the same purpose.
(From OE-Core rev: d99dac66e3e121e96c4d8a29aee846d4b8f38622)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
create_wrapper was previously abused to invoke the Perl interpretter directly
instead of relying on #! parsing, which is read into a 128 byte buffer so breaks
with deep build directories.
However we already install a "nativeperl" binary into the native sysroot, so
use sed to change the #! line to /usr/bin/env nativeperl.
(From OE-Core rev: c4f987239fe78783d732df673a5e592bb05a877d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patches removed:
0001-doc-Fix-texinfo-table-markup-in-qemu-options.hx.patch
- applied
0002-docs-Fix-generating-qemu-doc.html-with-texinfo-5.patch
- fixed different upstream
Revert-vmware_vga-Add-back-some-info-in-local-state-.patch
- fixed different upstream
arm-bgr.patch
- this should be also fixed upstream, if still issue please resend.
fallback-to-safe-mmap_min_addr.patch
- this should be also fixed upstream, if still issue please resend.
linker-flags.patch
- unneeded with makefile changes
from configure the obsolete --audio-cards-list option has been removed.
(From OE-Core rev: 408f933f3b5523fc26ee818a16bb4162c4343192)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
run-postinsts is generic and will handle rpm delayed postinsts just
fine. No need to use another recipe.
(From OE-Core rev: 1195a188f366fbbb04b9379d7ea3c7c02130cc98)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This recipe is used only when the package manager is not deployed on
target and there still are delayed postinstalls that need to be run on
target. At the moment, run-postinsts is targeted to dpkg/opkg. RPM uses another
recipe, called rpm-postinsts which, in turn, is used even when the rpm
package is deployed.
This patch intends to make run-postinsts generic and deprecate
rpm-postinsts. Here's why:
* when opkg/dpkg are not deplyed, the meta-data files are useless.
Hence, the awk script is not needed. The postinstall files are already
saved in /etc/(deb|ipk)-postinsts directory and we can use the same
procedure as in rpm's case;
Also, the recipe is moved out from meta/recipes-devel/dpkg to
meta/recipes-devel/run-postinsts.
(From OE-Core rev: 0222e6740ee4670bbf42d246ab3ecad415ffcdee)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to be able to generate a standalone tarball containing tar/git so
add nativesdk versions of the appropriate recipes to allow this to be possible.
Tweak the git perl paths to avoid warnings when building the nativesdk version,
ensure the binaries are wrapped correctly and avoid update-alternatives in
nativesdk-tar.
(From OE-Core rev: c91bb8c76e3bd45690e66f3de79cd3adfe45f600)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Base this on DISTRO_FEATURES, because we don't want it
unconditionally enabled.
(From OE-Core rev: 6956fb01e0c7332e4d8b59cbcb1cd997c54191fc)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
upgrade from 0.9.66 -> 0.9.69
- COPYING file contains now more detailed information.
- reworked a patch because it didn't apply.
(From OE-Core rev: 376612cbf7fa5c68ae3adb6f4c1b4427e69a1871)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add build directory to include directories by -I${B}/include which will
be searched before standard system include directories.
Both libunwind and gcc supply unwind.h, once gcc use libunwind's unwind.h,
the compiling will fail.
This patch is generally not applicable to the upstream as they do not
use libunwind.
(From OE-Core rev: 2b47bce78536a800205b2385bba69038351545e5)
Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When cross compiling the target compiler, both the cross-compiler
and the host compiler are used. However, the -W options used were
discovered from the cross-compiler and may be incompatible with the
host compiler.
(From OE-Core rev: 1f40202ce3c1282674b6cea39ef709972275f201)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously count actually behaved as end, and did not take start into
account.
(From OE-Core rev: 4fe2b01bfd2831b002e7138dadbc0437df6e9ed6)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a floating dependency that got added in recently and was
caught on the Autobuilder, disable building with LZMA to ensure
consistent builds
(From OE-Core rev: 1e58fc8f6ac8f13d6c86a3ae340d90dd53b3ec27)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Back port two patches to fix the error of complex expressions before @l/@h.
Error sample:
test.s: Assembler messages:
test.s:1: Error: operand out of range (0xffffffffffff8000 is not between 0x0000000000000000 and 0x000000000000ffff)
Fix Bug 4524.
(From OE-Core rev: 9ba812ab1f613d28f9eb3192d2ff1a34dfce33e4)
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The apt recipe had the correct checksums, the -native did not. Depending
on which downloaded first, the build could succeed or fail.
This patch corrects the checksums for -native to match the apt recipe.
(From OE-Core rev: 86d0708bb59952a139e705a8c396e70dd0084b75)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The argument parser in RPM was patched to look for <binary>.real, but since the
wrapper now fakes the right argv[0] rpm wasn't able to parse any options.
(From OE-Core rev: a67b4cfc41819ed77ed2bc4246228e9d006a4317)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dpkg has no DEPENDS on lzma so turn it off explicitly.
[YOCTO #4518]
(From OE-Core rev: 12fbd693f4565e66d10af4e801e7435996d67e76)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After e8d2a2a3646f964ec61ece62e14788cd7184dd01 [OE-Core], file --version
returns file-5.14 instead of file.real-5.14 so the patch is no longer
necessary and causes the build to fail with the following:
| Cannot use the installed version of file (file-5.14) to
| cross-compile file 5.14
| Please install file 5.14 locally first
(From OE-Core rev: f89f705da9bffd9d10628e90a415db4411d22b4e)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes the following failure at do_install building python-smartpm-native
if gettext-native has not already been built and gettext tools are not
installed on the host:
| compiling locale/it/LC_MESSAGES/smart.po -> locale/it/LC_MESSAGES/smart.mo
| sh: msgfmt: command not found
...
| creating $D/usr/share/share/locale/it/LC_MESSAGES
| error: can't copy 'locale/it/LC_MESSAGES/smart.mo': doesn't exist or not a regular file
Note that we need gettext-native in DEPENDS and not "inherit gettext"
here because for native variants, gettext.bbclass instead adds
gettext-minimal-native to DEPENDS and that does not provide the msgfmt
command.
(From OE-Core rev: e8d903e2d5e0c0df18dfd9561c3f8ef340297f1f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the increment > 1 and the start > 0 then the calculation for the
minor device number was incorrect.
(From OE-Core rev: 0a878426bee607a7d961ba475a7ec7e89115df35)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When creating a block of devices (i.e., when count > 0), the wrong
path was used with the call to chown(), effectively trying to change
the owner of some (probably) non-existent file. Thus the created
device nodes were always owned by root.
(From OE-Core rev: e7796880164d6a37c2699a94e1c5391337c5eaa5)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
guile needs to be able to convert strings from ISO-8859-1 in order
to work properly. This patch adds a runtime dependency to the required
convert package, but only when glibc is used. The fix for uClibc depends
on another bug (#4530).
[YOCTO #4019]
(From OE-Core rev: 0e519c99bafd49ecac97b1fb9185a4d02fb44d75)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While the destro didn't install scons, build scons by python-scons-native,
and invoke it with the error:
...
$scons -h
Traceback (most recent call last):
File "/buildarea2/hongxujia/build-20130520-udev-emenlow/tmp/sysroots/x86_64-linux/usr/bin/scons", line 188, in <module>
import SCons.Script
ImportError: No module named SCons.Script
...
1, While building scons as default, scons's lib will be install in the dir of
`scons' or `scons-2.3.0' if the option `--install-lib' is not set explicitly.
2, While build python-scons-native, `--install-lib' is explicitly set, and
scons's lib was not installed in the dir of `scons' or `scons-2.3.0'.
3, While invoke scons-native, the scons searches the lib in ${STAGING_DIR_HOST}/
${PYTHON_SITEPACKAGES_DIR}/scons, ${STAGING_DIR_HOST}/${PYTHON_SITEPACKAGES_DIR}/
scons-2.3.0 rather than ${STAGING_DIR_HOST}/${PYTHON_SITEPACKAGES_DIR}.
Use create_wrapper to relocate scons-native to add `${STAGING_DIR_HOST}/${PYTHON
_SITEPACKAGES_DIR}' to PYTHONPATH, so scons-native could find out the lib.
[YOCTO #4562]
(From OE-Core rev: 1aa828d05ae1614689542c6a9ce6425a088bdc7d)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will enable or disable xattr with the correct dependency
on attr as needed.
(From OE-Core rev: dd219cb2608e5800dcd900117b37ad8cf9ac689a)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The path to the native perl was incorrect leading to rootfs failures. This
patch corrects that problem, it's a complementary fix for commit:04432446.
(From OE-Core rev: 0f99d7fed094a59d2c5c01c83ea38dc852aadf6b)
Signed-off-by: Ming Liu <ming.liu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the QA warning:
WARNING: guile: The compile log indicates that host include and/or library paths were used.
(From OE-Core rev: 1582975cd89b0b71c93913f07648c67f2b18bc99)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Incorrect exec-prefix path was given to gdb which leads to gdb
startup failure when SDK is not installed to its original destination.
Gdb relocates the exec-prefix path, so it will work for SDKs that
are installed to different location. PYTHONHOME env in no longer
neeeded for gdb.
[YOCTO #3839]
(From OE-Core rev: e77603324332b932c73c9e22ab65a0b9b7c17798)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update required to pass "movi" related build errors when gcc-4.8 is
used.
libgcrypt, slang, mysql5 were failing like this:
| {standard input}: Assembler messages:
| {standard input}:316: Error: immediate value out of range 0 to 255 at operand 2 -- `movi v3.8b,-106'
| {standard input}:348: Error: immediate value out of range 0 to 255 at operand 2 -- `movi v3.8b,-8'
| {standard input}:352: Error: immediate value out of range 0 to 255 at operand 2 -- `movi v3.8b,-27'
(From OE-Core rev: 2489151dbfc8bc002d89ab199d457ab3794c54a8)
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a race condition between when the CONFIG_SITE list is generated and
then used here via the cat to create the config.cache and in *all* configure
scripts when reading from CONFIG_SITE.
The race in this case is that the sstate setscene task runs on a package that
contains a site config file (ncurses in this case) and then bitbake decides
that it needs to rebuild and cleans out the site config file, so it existed
for siteinfo_get_files() to find in SITECONFIG_SYSROOTCACHE and then was removed
for the rebuild. When bintuils tried to run the do_configure() task which creates
the binutil's version of config.cache it reads from CONFIG_SITE which now contains
the non-existant site config file. (confused yet ;-)?
Currently the configure script does a test -r to ensure the file is readable
before using it, therefore having the cat succeed regardless of the file being
available is consistent behaviour.
(From OE-Core rev: ffd8f05e5548500199c9b04a174067811ad2c5e7)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
0001-doc-Fix-texinfo-table-markup-in-qemu-options.hx.patch and 3f08ffb4a4741d147634761dc053ed386243a0de.patch were backported in 1.4.1
(From OE-Core rev: d3fd92010a0b965fe1b7696f7c4e6c02d07f85dc)
Signed-off-by: Ionut Radu <ionutx.radu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a optional dependency on xattr (and thus the attr package),
disable it by default, to ensure it builds correctly.
(From OE-Core rev: a7de32c8ad1405ed31b620fb99dfe0fe80ac23a9)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On 05/17/2013 05:31 PM, Björn Stenberg wrote:
> Unless there are clear advantages with patching t/TEST that I have overlooked, I suggest using sed in run-ptest instead.
Ok.. Here is the new commit.
Removed the patch and added a call to sed in run-ptest. See attachment
for the test log.
From: Jesse Zhang <sen.zhang@windriver.com>
Date: Tue, 14 May 2013 02:53:30 -0400
Subject: [PATCH 1/1] perl-tests: convert to ptest
Replace PERL_TEST_DIR with PTEST_PATH, and rename "tests" with "ptest"
in various places. Also add a run-ptest script.
[YOCTO #4292]
(From OE-Core rev: 364cad5d8eecfec74a7be8cf93e75cd63031101f)
Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rebased support-oe-qt4-tools-names as some of the changes where
added in the upstream code.
(From OE-Core rev: 13399264e987b698b120688dc5018adb3fa8522d)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable postinst logging by checking the configuration in ${sysconfdir}
/default/postinst.
In this way, the postinst logging is enabled if 'debug-tweaks' is
in IMAGE_FEATURES, and at the same time, we avoid unnecessary rebuild
if IMAGE_FEATURES is changed.
[YOCTO #4262]
(From OE-Core rev: 6f2aa32f10c24c84e581128bb3a976ef071197ac)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable postinst logging by checking the configuration in ${sysconfdir}
/default/postinst.
In this way, the postinst logging is enabled if 'debug-tweaks' is
in IMAGE_FEATURES, and at the same time, we avoid unnecessary rebuilt
if IMAGE_FEATURES is changed.
[YOCTO #4262]
(From OE-Core rev: 35be6ffc19a5156aa029397707f1e6869684b821)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enable postinst logging by checking the configuration in ${sysconfdir}
/default/postinst.
In this way, the postinst logging is enabled if 'debug-tweaks' is
in IMAGE_FEATURES, and at the same time, we avoid unnecessary rebuilt
if IMAGE_FEATURES is changed.
[YOCTO #4262]
(From OE-Core rev: 881880992ac0edc5f928f7e3d2a8f3f993284df6)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade from 2.01 -> 3.00
- Updated md5 of the license file because new information
was added by the owner.
- Removed glibc-conflict-rename.patch because it is not
required anymore.
- Updated no_usr_src.patch because it didn't apply.
(From OE-Core rev: 951a8e422be93a3d06d0149f9b070eddcdb37afb)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The class-native override is undoing the dependency that distutils-base
added which we require. This patch adds in the missing dependency manually
to ensure the build functions correctly.
Fixes [YOCTO #4502].
(From OE-Core rev: ae28ee3f7a060b9e0d13154a84f2444a98490b5b)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was transferred un-intentionally when we split the rpm code,
the base-files then layed down additional files (specificaly /etc/mtab)
in the initramfs image and caused problems for the installer code.
Removing the RDEPENDS will fix the image generation issue and thus
the installer, so we will need to revert a previous patch that attempted
to fix the earlier issue #4229.
[YOCTO #4504]
[YOCTO #4229]
(From OE-Core rev: 6861eb34e903c5ddf491eca04011b2219fe14267)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The common init script links use two-digit sequence numbers and
systemd interprets everything behind the two-digits as service name.
This leads to the following failure during boot:
Cannot add dependency job for unit 9tcf-agent.service
(From OE-Core rev: e29a13bf047ce90e9e1aae953044b9cab85f9aab)
Signed-off-by: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove older patches that have been fixed upstream, added new patch to
use the correct alias-libtool instead of ./libtool.
pkgconfig provides an internal glib library, so use it to avoid ciruclar
dependecny issues.
(From OE-Core rev: d91a43228c5ba35335a28de278194df23dcdf978)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patches are now part of upstream or no longer needed.
Added new util-linux dependency for isohybrid.
Paths updated to reflect directory structure changes.
Add CFLAGS and LDFLAGS overrides.
[YOCTO #4438]
(From OE-Core rev: 17e7ac0c5e75245d17a90e5cc49ade3d18a168ba)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The license checksum changed because of a small correction in the
license text.
(From OE-Core rev: eb2b082146cf3ba229a816faa9c87fd098c0627f)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows out-of-tree versions to include one file to have all set.
(From OE-Core rev: c1bfe7985ac95644585e8b296edd9722c2ca4f57)
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename nativesdk item to prefix vs suffix. Some minor changes for
getting it works after renamed:
* append patches dir 'libtool/' to FILESEXTRAPATHS
* update ${S}, append '${datadir}/libtool/*' to FILES_${PN}
(From OE-Core rev: cc7deb8b8dbc58975b8f55cd63f237aa0ded0887)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"2013" was added in the 'Copyright' line in LICENSE.txt.
(From OE-Core rev: de425c01ffc50d53d570c24e2fe99e1a8b81e5ac)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
They differ at times because one is set from the db_cv_path_mkdir and the other is
found during config time for the host (/usr/bin/mkdir), in the macros we should just
use __mkdir for the __mkdir_p variant.
[YOCTO #4452]
(From OE-Core rev: 2ab642056829aef675f75c05b9ac5bbc43c87cd1)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We had hard coded python-native and python's default optimization to 1,
which made the "assert" statement didn't work, and removed the "-O/-OO"
(optimization options), the target python had a "-N" option to disable
the default optimization, but the native python didn't.
I think that we can set the environment variable PYTHONOPTIMIZE or use
"python -O" if we need to optimize, but I'm not sure whether we need to
set it by default, it would confuse the user or cause/hide unexpected
problems if the "assert" doesn't work.
[YOCTO #4427]
(From OE-Core rev: 165ed464bbb9bf985dde9d8c15d000809901fff6)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some left over tab characters in the python functions. This
removes them and resolves python 3 errors.
(From OE-Core rev: fafeb381c48291fa65c634c01c244843c8d7fad3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some distros have newer makeinfo which does not go well with
anything below gcc 4.8, this fix avoids regenerating info files
(From OE-Core rev: 50ac2ed5299e2b47b2f3fd9c9cde9d733d2f8d9b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is so the multilib prefix is not used
(From OE-Core rev: 50e26e553152485461d096463db0fb4f4fa826d6)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes errors seen while compiling gcc 4.8 for target, errors like
| /home/khem/work/angstrom/build/tmp-angstrom_next-eglibc/work-shared/gcc-4.8.0-r0/gcc-4.8.0/libatomic/cas_n.c:125:1: fatal error: opening dependency file .deps/cas_1_.lo.Ppo: No such file or directory
which are due to disabled dependency tracking but dependency files being still generated
while compiling libatomics.
(From OE-Core rev: c83cbc80af078d7be5deec44bba6e0ca29a5ee1a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a backport of a whitespace skipping issue: PR14987 and PR14887
(From OE-Core rev: f4312eaeb6eb2b7196be2b968e2e468e705fb2cf)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fix_parallel_build_issue.patch is now part of upstream.
(From OE-Core rev: 87cb30d988843ab1159d23789cd334aaf2a77e34)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gdb depends on readline so gdb-cross needs to depend on readline-native to
build successfully.
(From OE-Core rev: ee132d68220d7f515760d47db57e00d1d8263a1a)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Acked-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dmidecode reports information about your system's hardware as described
in your system BIOS according to the SMBIOS/DMI standard.
This recipe was updated to version 2.12 and cleaned up slightly from the
OE 2.10 version and proposed here for inclusion in oe-core.
(From OE-Core rev: 120495843118b55e865bb8d87933bd585fced992)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Backport fix for internal compiler error when building gcc-4.7.2 with a
gcc-4.8.0 host gcc.
See upstream bug here: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=56308
(From OE-Core rev: b1dc91969f9bb0c2a3a4336f5e9a2f57aabb9f78)
Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we didn't build libgomp then we won't have installed anything into
${infodir} or ${libdir}/gcc/${TARGET_SYS}/${BINV}/finclude. Check
whether those directories exist before trying to remove them, else we
will lose.
(From OE-Core rev: 507e14ecdc5b4ff2ee7f1128d9f30c2948e10d5a)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently a load of scripts in ${bindir} start with:
which is undesireable, this patch fixes that.
(From OE-Core rev: e3634ec359a71c9858698cb597d23c05b1184d2e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This wrapper script is called mainly from intercept hooks and allarch
packages postinstalls. When multilib is used, the qemuwrapper script
points to the binary that matches the MACHINE architecture.
For example: if MACHINE=qemux86_64 and we activate multilib, then the
postinstalls for lib32 packages would call qemu-x86_64 with 32 bit
binaries and they would certainly fail.
This patch adds just a fallback method if the exit code of the previous
qemu call corresponds to "Invalid ELF image for this architecture"
error. This will allow us to have all postinstalls run on host.
(From OE-Core rev: 0c6ddb84043f0f917543cdaf4814efc15cd0273f)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GDB's configury has a tendency to hard-code the path where it found
libexpat using "-Wl,--rpath". This is undesirable and leads to QA warnings.
Fortunately, the helpful GDB maintainers have provided a "--disable-rpath"
switch to turn this behaviour off. Let's use it and profit.
(From OE-Core rev: 3d70f28cc9612f733b835df139f31c197528677a)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
GDB wants to install a bunch of files in ${datadir}/gdb/python/gdb
and ${datadir}/gdb/syscalls. These pathnames are invariant with
TARGET_ARCH which means that if you build gdb multiple times for
different targets they will all try to write to the same location
and you get a lot of warning spew about manifest conflicts.
Prevent this by factoring the target specification into ${datadir}
so that different copies of GDB install their files into different
paths.
(From OE-Core rev: 3e87aba1ee2ca0e39ba66fb7cba52e48df499c23)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't add the first line of /etc/rpm/platform to the list of patterns
to match when computing an arch score, use it just for getting
information about the platform (cpu/vendor/os).
[YOCTO #3864]
(From OE-Core rev: 9263a2192ccf8ca513cbf7f2f88473e267e6b945)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* HOMEPAGE was incorrect
* We're not really interested in the fact that Smart works across
different distros.
(From OE-Core rev: a7f8989e027abea84a371703909f62a8b9a03177)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
armv5t was seeing ICE on code from elfutils it has been fixed upstream
so lets backport it.
(From OE-Core rev: 6c50d60ce3fd7242e67a531d5875edeb8b7a3651)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When trying to import setuptools on a minimal image, it reports that some
python module is missing. We add those missing python modules as runtime
dependency.
(From OE-Core rev: c5de114f63fe3d60a48622ec5be8fa34ce177191)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The postinstall needs to reference $D, not ${D} which would get expanded
by bitbake. This allows postinsts to run correctly on the target system.
(From OE-Core rev: 6573685a5374034df065c41bbe71c7ac49e4b9a4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In each of these cases allarch is used where the package in question has a
dependency on things which are not allach and change when MACHINE is changed.
This leads to a rebuild of the package each time MACHINE is switched and
the sstate checksum changes. The dependencies in question are not suited
be being marked as ABISAFE.
(From OE-Core rev: 087a680429efa713a98fbb89f927b046fe07f87c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
task packages were renamed to use packagegroup so fix this reference.
(From OE-Core rev: bcd68f11e479e8a3a95793ab2ed65202c0f71d84)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This wrapper script doesn't need a compile or any of the default system
dependencies so lets inhibit them. This also stops the script
being rebuild every time the toolchain changes.
(From OE-Core rev: 7f72562d274dd2c37ce9262bb7fb8a8a6a9a37df)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This doesn't work when the initscripts package is not installed (e.g.
when using systemd only) and is not even needed.
(From OE-Core rev: 6c972598c6da17fbec7a4582eb593c31f4283275)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fixes
In file included from /home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/libfdt.h:55:0,
from /home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/work/x86_64-linux/qemu-native/1.4.0-r0/qemu-1.4.0/hw/arm/../../device_tree.c:28:
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:58:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:59:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:60:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:61:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:62:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:63:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:64:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:67:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:70:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:73:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:77:2: error: unknown type name 'fdt64_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:78:2: error: unknown type name 'fdt64_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:82:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:87:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:88:2: error: unknown type name 'fdt32_t'
/home/oe/setup-scripts/build/tmp-angstrom_next-uclibc/sysroots/x86_64-linux/usr/include/fdt.h:89:2: error: unknown type name 'fdt32_t'
(From OE-Core rev: dfb0c2cf9799d084a76aa92e243c743d7ff05db8)
Signed-off-by: Henning Heinold <heinold@inf.fu-berlin.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recipes cannot depend on the value of IMAGE_FEATURES; in this case the
result is do_package task signatures changing every time IMAGE_FEATURES
changes, causing a large number of task re-executions. The
implementation of the log capturing really needs to be changed to
capture these in a different place and possibly not even conditional
upon IMAGE_FEATURES at all, but this will be invasive at this point in
the development cycle. For now, remove the variable dependencies to fix
the immediate problem.
Fixes [YOCTO #4246].
(From OE-Core rev: b4fbe4095de447ef4e426128bafaf8a292fa63e1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If multiple package managers are installed in the image, they will
overwrite each other's run-postinsts script, resulting in postinstalls
not beeing run at all at first boot.
What this patch does:
* checks whether opkg/dpks/rpm is actually used to install
the packages and, only after, creates the run-postinsts script;
* brings dpkg recipe in sync with opkg: moves the script creation from
do_install to postinstall;
* move creation of run-postinsts script (rpm-postinsts recipe) to the
postinstall scriptlet in order to better control the creation of the
script according to the package manager used;
[YOCTO #4231]
[YOCTO #4179]
(From OE-Core rev: d7fd56df0a4954954d6d0764ae06beb869e6b99a)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* If /etc/rpm-postinsts doesn't exist, don't error
* If deleting the script errors, don't bother printing it (this will
always happen if the root filesystem is read-only)
(From OE-Core rev: f787b8302ed61bdaf1767473b856f31fe5bba28e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not only was the variable reference in this line broken, but it wasn't
going to work anyway - we install the script directly into /etc/rcS.d
and not into /etc/init.d, so the code in update-rc.d.bbclass couldn't
find anything there. This resulted in a postinstall script for
rpm-postinsts being created in /etc/rpm-postinsts which can't work when
the root filesystem is read-only. To simplify things just remove the use
of update-rc.d.bbclass since we don't really need the added complexity
here.
Fixes [YOCTO #4222].
(From OE-Core rev: d196d08acafe599c16a7ac8e04121039b1216ba6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've been seeing random sefgaults on a variety of architectures which appear
to be from an issue in qemu. The attached backport from upstream appears
to fix these.
[YOCTO #4216]
(From OE-Core rev: 55a22b7341571179d5e026d102953a6d9f2045bf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When shutting down a core-image-lsb-sdk image, there is a lot of time spend stopping tcf-agent,
which slows down the whole process. The reason for this slowdown is the fact that it tries in a
loop to kill tcf-agent service by using killproc with the path of the executable and killproc
does not seem to available in lsb images. This patch fixes the issue by using "kill" instead of
"killproc".
[Yocto #3928]
(From OE-Core rev: 251361eb78176a04e3da00e0f77b7f3ff459d571)
Signed-off-by: Ioana Grigoropol <ioanax.grigoropol@intel.com>
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make CHANNELSDIR in smart empty, since this causes host contamination issues
on some RPM-based hosts on which smart is already installed.
[YOCTO #3881]
(From OE-Core rev: 94e76a98b6cdafe9547630be159401ac1d8c5edd)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this is needed only for 4.7 series, newer works fine with texinfo-5*
[YOCTO #3947]
(From OE-Core rev: d85d15972d78b5dda7a03dd273a64305f115282b)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enables qemu to run images with video output without the need for vncviewer.
(From OE-Core rev: 30d5c1d5bc9a3931a09425962d980a3571dc56f3)
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When trying to import python-pprint on a minimal image, it reports that
the cStringIO python module is missing.
This is provided with python-io, so we add python-io as runtime
dependency.
The complete observed trace was:
Python 2.7.3 (default, Apr 4 2013, 07:45:36)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import pprint
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/pprint.py", line 40, in <module>
from cStringIO import StringIO as _StringIO
ImportError: No module named cStringIO
(From OE-Core rev: abe7bf9992e298f1b53e790eee7b064a9e4e8589)
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@oss.bmw-carit.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch allows for the run-postinsts script to be provided outside
of the rpm package itself and not pull in all the associated build
dependencies.
[YOCTO 4175]
(From OE-Core rev: 7841ee7041d04f11a3d879fb5bc60bb37de0a5c0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Use newer version 0.8.90
* Updates to a BBCLASSEXTENDed recipe instead of just a native recipe
* Use PV in SRC_URI instead of hardcoded version number
In copying over the recipe from meta-oe, some minor changes were made:
* Preserve the existing OE-Core nativeperl wrapper usage
* Drop setting of S which is effectively the default value
(From OE-Core rev: ef24f8e7e6b91ad8e83942bd956e0d6ab0fc077b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it's not part of sources, downloading some html from web is not better
check then using meta/files/common-licenses/EPL-1.0
* http://www.eclipse.org/org/documents/epl-v10.html was changed, plain
text looks the same, but html formating was changed (from MS Word
export to valid XHTML 1.0, changing checksums for this new html
would cause issues for people with old epl-v10.html already on
PREMIRROR, so lets just remove it.
(From OE-Core rev: 22bce79652fc753a7b5d536664b744e110b5775a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
remake fails with errors during configure due to the out of tree build changes.
This ensures the configure commands run correctly on files in ${S}.
[YOCTO #4139]
(From OE-Core rev: 166c123bc0d121eeea39db71e63940fa2f8a3f7b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If package-management isn't in IMAGE_FEATURES, the postinstall handler
wasn't being installed. rpm needs to depend on this to ensure it does
get installed.
[YOCTO #4160]
(From OE-Core rev: 0c2778c36f521d019ab6ff0c458a1e117808d2e5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we provide those files manually (i386_gendis, which is needed for
generating those files, has to be run on host and would fail when
compiling for other architectures), the mentioned compilation targets
in libcpu/ are not needed anymore.
This change will avoid a nasty race condition when running "make -jX
install" resulting in a zero size libebl_i386.so file. The issue happens
because, at "make install" time, the *_dis.h prerequisites will be newer
than the target itself, triggering a chain of recompilations while, in
the same time, the binary files are copied to the destination directory.
Hence, the zero sized file...
[YOCTO #4131]
(From OE-Core rev: a4ebe0f6efc8ed93521e75919f23821f59934c1f)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Makefile in the package tries to set _FILE_OFFSET_BITS=64,
but we clobber that with our CFLAGS, so we add it in
the recipe.
[CQID: 409915]
(From OE-Core rev: ac904b9e10ec9641686bc35dcf200b9b855899b1)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Split out run-postinsts script into separated package, sometimes only the
postinsts script is required to run all postinsts scripts in /etc/rpm-postinsts/
instead of the whole rpm package.
2. Set ROOTFS_PKGMANAGE_BOOTSTRAP to rpm-postinsts
(From OE-Core rev: 056490ddbfdbb6cc6fa0d8ff8716d64819d6b16c)
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes failures in builds where qemu fails with:
i586-poky-linux/qemu/1.4.0-r0/qemu-1.4.0/hw/arm/../../device_tree.c:28:20: fatal error: libfdt.h: No such file or directory
x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.7.2/ld: cannot find -lfdt
(From OE-Core rev: 1bf194f392bf14154e9cc2c33e117a52ef07f9e1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This can cause issues building ppc64/eabi kernel. For details
see the patch header
(From OE-Core rev: 3c6622e22b0e1b2a8ceea6465ea84c6fb8299518)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[ YOCTO #4089 ]
When constructing a new buildid, the items being hashed need to be
returned to their native endian. In the process we were munging
the sh_type field that we relied on to determine if a section was
loadable or not. The patch avoids this behavior by only modifying
a copy of the local endian data.
(From OE-Core rev: ac4d2d44c88cace8dbce0c8e7df3fd1f2ed244b4)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On systems with dash as /bin/sh there were failures in do_package_write_ipk
due to bashisms in opkg-build. This newer revision contains a fix for this.
(From OE-Core rev: 0e185b86e80989a7904292f5866540a049cc4daa)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
docbook-utils-native started to install frontends and backends in
wrong locations after this change. The absolute build and source
directories were being created in install locations and the recipes
using docbook-utils-native were complaining like dbus-java is saying
| jw: There is no frontend called
"/b/kraj/jlinux-next/poky/build/tmp-eglibc/sysroots/x86_64-linux/usr/share/sgml/docbook/utils-0.6.14/frontends/docbook".
| make: *** [CreateInterface.1] Error 2
| ERROR: oe_runmake failed
Rightly so because now they are installed under
/b/kraj/jlinux-next/poky/build/tmp-eglibc/sysroots/x86_64-linux/usr/share/sgml/docbook/utils-0.6.14/b/kraj/jlinux-next/poky/build/tmp-eglibc/work/x86_64-linux/docbook-utils-native/0.6.14-r3/
This patch fixes the install to be like it was but consider
the build and sourcedir split.
(From OE-Core rev: d60aec3f5b319f4583fa72a8357b9ddd3be62b1a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[ YOCTO #4089 ]
On PPC and MIPS, there appears to be a condition that causes
debugedit to segfault. The segfault is related to a call into
the md5hash algorithm, an address of '0', and a size > 0 is passed
causing the access of the address to segv.
This workaround may prove to be the final fix, but it's currently
unclear what the actual cause of the 0 address is.
(From OE-Core rev: a046029eb96cd9307253937ceeadafaaa6d06dce)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having '${S}' in the for loop was causing the headers to be installed
into the wrong location. Move the 'S' to the install line.
(From OE-Core rev: 41c0241a810f0a97ddc98a834e717645e0047958)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The recursive parameter is set to True, the regex for the first call to
do_split_packages matches any path under ${libdir}/perl/${PV}/auto/, and
the .debug directories contain .so files, so each one was getting picked
up as a package. Change the regex to disallow dots in the path beneath
auto/ and thus avoid the .debug directories.
Fixes [YOCTO #4048].
(From OE-Core rev: f8f6992fe0f29db1cc4df15b7449e06188052041)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Need to reference objects from ${B}.
(From OE-Core rev: 0610cf3ef864acc9ca98498b9810bcce0fbb935a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to run autogen.sh in the correct directory (${S}).
(From OE-Core rev: f352f9f25695635bbaad09774f02e66684971fc0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by adding missing path component.
(From OE-Core rev: fd86061e02bd175dcc5816db1cf15d705d338062)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add missing path component to make out of tree builds work.
(From OE-Core rev: 04515f61e2768435126f0c8ccfb5ad1e368710ee)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running 'python setup.py build' would fail due to the python Makefile having
CC= i586-angstrom-linux-gcc -m32 -march=core2 -msse3 -mtune=generic -mfpmath=sse --sysroot=/home/koen/v2012.12/build/tmp-angstrom_v2012_12-eglibc/sysroots/fri2
CXX= i586-angstrom-linux-g++ -m32 -march=core2 -msse3 -mtune=generic -mfpmath=sse --sysroot=/home/koen/v2012.12/build/tmp-angstrom_v2012_12-eglibc/sysroots/fri2
'--with-libtool-sysroot=/home/koen/v2012.12/build/tmp-angstrom_v2012_12-eglibc/sysroots/fri2'
And more
Multiple users have reported this problem:
http://hipstercircuits.com/?p=499http://www.gigamegablog.com/2012/09/09/beaglebone-coding-101-spi-output/
(From OE-Core rev: 5704dfa690a625abcface432cf5f9c9bc3ee8abd)
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change allows ${B} != ${S} builds to work since otherwise
gnu-configise is executed in the wrong places and various source
paths aren't correct.
(From OE-Core rev: e0705e4801a9855a4289d18e653c35190021206e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add patch to fix out of tree build failures.
(From OE-Core rev: 43da2e1fc1509d039e4ccfa31b7359c65407fde0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by fixing cwd assumptions.
(From OE-Core rev: 21b504453cbd5ef94812fddf224622c7ce167981)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree build by fixing cwd assumptions.
(From OE-Core rev: 1f7583d669f1d13cdc2ed0f7c468c65879489cca)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by placing built objects in the correct
location.
(From OE-Core rev: 89514049f424eddaa9e46cf4fd8c25d05a9b1c15)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by using full paths to source and built
objects as appropriate.
(From OE-Core rev: fb9885f0f89eef30275683510569bf0ae8463226)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds for the native case by using the correct
path to the built object.
(From OE-Core rev: ea39d2ba55205d47356ee53779ce991eade1fb5f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by removing assumptions about cwd and using
full paths to files in ${S}.
(From OE-Core rev: 6c2d3ced1af4e7ebc63e9a9ac9353d565d1568bf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow out of tree builds to work by removing assumptions about cwd.
(From OE-Core rev: f265de26fcde98cdc7a8e4bfec777888a216ff8c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix out of tree builds by referring to the build object in ${B}.
(From OE-Core rev: a49689a50a44657d8d13609b85d0f8dbaf6cfb86)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can specify no path to m4 at configure time and thus avoiding
having a wrapper for that particular problem.
(From OE-Core rev: 4e8b9f2521d6581db8d63e742000a8c742729f25)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
AVAILTUNES is only used as a sanity check, we don't need to
include it in the sstate checksum in this case. If included
it can cause problems when switching machines with a common
package architecture.
[YOCTO #3667]
(From OE-Core rev: b1cc5a4055c6402595eac1a93eac4c946210d130)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If fortran is not built, soft links to gfortran and g77 are created
even though the fortran compiler doesn't exist...
[YOCTO #4023]
(From OE-Core rev: c5c135bc5e71a6f9b14f249358bf5d217050ee55)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Following build error will appear on Fedora18+:
ar.c: In function 'do_oper_delete':
ar.c:918:31: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess]
memset (found, '\0', sizeof (found));
(From OE-Core rev: 5cc3b4fe09cfa2b3e67568a9c2494c198a5292af)
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Following build error will appear on Fedora18.
nm.c: In function 'show_symbols_sysv':
nm.c:756:27: error: argument to 'sizeof' in 'snprintf' call is the same expression as the destination; did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess]
snprintf (name, sizeof name, "[invalid sh_name %#" PRIx32 "]",
^
(From OE-Core rev: 61010972284cc53cfc7958a9f6422e3fe74fcc0e)
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
binutils build fails on Fedora18+:
1. binutils-2.23.1/bfd/elf32-xtensa.c:6078:36: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess]
memset (sec_cache, 0, sizeof (sec_cache));
^
2. binutils-2.23.1/bfd/elf32-xtensa.c:6120:32: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess]
memset (sec_cache, 0, sizeof (sec_cache));
^
3. binutils-2.23.1/opcodes/arc-dis.c:430:13: error: argument to 'sizeof' in '__builtin_strncat' call is the same expression as the destination; did you mean to provide an explicit length? [-Werror=sizeof-pointer-memaccess]
sizeof (state->commentBuffer));
^
4. binutils-2.23.1/opcodes/rl78-dis.c:230:13: error: array subscript is above array bounds [-Werror=array-bounds]
if (oper->use_es && indirect_type (oper->type))
^
(From OE-Core rev: 5445e12e5a32cc5c51ce8a29f2800692ed831115)
Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1, When build qemu-native on SLED 11.2, there is an error:
...
| In file included from /usr/include/bits/sigcontext.h:28,
| from /usr/include/signal.h:339,
| from /buildarea2/tmp/work/i686-linux/qemu-native/1.4.0-r0/
qemu-1.4.0/include/qemu-common.h:42,
| from fsdev/virtfs-proxy-helper.c:23:
| /usr/include/asm/sigcontext.h:28: error: expected specifier-
qualifier-list before '__u64'
| /usr/include/asm/sigcontext.h:191: error: expected specifier-
qualifier-list before '__u64'
...
2, The virtfs-proxy-helper.c includes <sys/capability.h> and
qemu-common.h in sequence. The header include map is:
(`-->' presents `include')
...
"virtfs-proxy-helper.c" --> <sys/capability.h>
...
"virtfs-proxy-helper.c" --> "qemu-common.h" --> <signal.h> -->
<bits/sigcontext.h> --> <asm/sigcontext.h> --> <linux/types.h> -->
<asm/types.h> --> <asm-generic/types.h> --> <asm-generic/int-ll64.h>
...
3, The bug is found on SLED 11.2 x86. In libcap header file
/usr/include/sys/capability.h, it does evil stuff like this:
...
25 /*
26 * Make sure we can be included from userland by preventing
27 * capability.h from including other kernel headers
28 */
29 #define _LINUX_TYPES_H
30 #define _LINUX_FS_H
31 #define __LINUX_COMPILER_H
32 #define __user
33
34 typedef unsigned int __u32;
35 typedef __u32 __le32;
...
This completely prevents including /usr/include/linux/types.h.
The above `<asm/sigcontext.h> --> <linux/types.h>' is prevented,
and '__u64' is defined in <asm-generic/int-ll64.h>.
4, Modify virtfs-proxy-helper.c to include <sys/capability.h>
last to workaround the issue.
http://www.linuxtv.org/pipermail/vdr/2009-August/021194.htmlhttp://patchwork.linuxtv.org/patch/12748/
[YOCTO #4001]
(From OE-Core rev: 1267bb2fd91f205d35e805aa019d25ab7a921b14)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch backport the fix where -Wcast-qual
reports a bogus warning with 4.7.2, There is
no workaround in code that can be done to avoid
it hence the fix to gcc is backported.
(From OE-Core rev: 5d8ef98225773a6ec88b5e1a76ce01d76163b3a5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dpkg compilation depends on the ncurses, so add
this dependency.
(From OE-Core rev: e33df55e69c5c517bcbc85452292740fe3b669da)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Strace just aborts with two-digit kernel versions (e.g. 3.0-foo).
Backport a patch from strace Git.
(From OE-Core rev: bff8456be448f0ae7ddae917ed3e9893f056376d)
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patches and .pc directories should not be shipped since the patches
were already applied. So, remove these 2 directories.
[YOCTO #3983]
(From OE-Core rev: c18a4bded48ed1f8fd39e1741beb2a3452ae43e3)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When image feature "debug-tweaks" is enabled, save output of post
install script to log file which can be configured when image first
boot.
[YOCTO #3223]
(From OE-Core rev: 94a58c153958002b117fcb5eeaef3d22be71a0f6)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When image feature "debug-tweaks" enabled, save output of postinstall
scripts to log file /var/log/postinstall.log when image first boot. And
the log file can be configured.
It also needs image feature "package-management" enabled. If not,
package run-postinsts will be installed and then all packages will be
configured by it. Command 'dpkg --configure' outputs nothing.
[YOCTO #3223]
(From OE-Core rev: 684b94317f5b78f6c9c993f84438f8fa7e59fd5a)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When image feature "debug-tweaks" enabled, save output of postinstall
scripts to log file /var/log/postinstall.log when image first boot. And the
log file can be configured.
It also needs image feature "package-management" enabled. If not,
package run-postinsts will be installed and then all packages will be
configured by it. Command 'opkg configure' outputs nothing.
[YOCTO #3223]
(From OE-Core rev: 378504c1c0ab1e0e09950b37effc04221b928236)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tested qemu on x86-64 target and qemu-native
no obvious problems seen in testing
(From OE-Core rev: f479201fffda617e3530967a75ab350739574b4b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bb files: remove invalid config.sub/config.guess files (autotools will
generate the correct files)
allocate-larger-memory.patch: not needed anymore
fix-gcc-4.6-null-not-defined.patch: added
- include header that defines NULL
includes-fix.patch: not needed anymore
localefixes.patch: removed
- not necessary anymore (no compiling errors)
makerace.patch: adapted to the new version
no-ko-translation.patch: adapted to the new version
no-nls-dpkg.patch: added
- fix build without nls
noconfigure.patch: adapted to the new version
nodoc.patch: adapted to the new version (apply patch on all cases
because the doc generation needs docbook-xsl)
remove-redeclaration.patch: not needed anymore
truncate-filename.patch: moved
use-host.patch: adapted to the new version
no-curl.patch: adapted to the new version
disable-configure-in-makefile.patch: added
- do not run configure at do_compile
(From OE-Core rev: 97403b14765331c8c48bb570c6b98f2809214a9a)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are various usages of ALLOW_EMPTY with no packages specified. This
is not recommended syntax, nor is it likely to be supported in the future.
This patch improves the references in OE-Core, either removing them if they're
pointless (e.g. when PACKAGES="") or specifying which package it applies to.
(From OE-Core rev: fe81bd4f600877e63433184cfc2e22c33bb77db6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reference:http://bugs.python.org/issue14579
The utf-16 decoder in Python 3.1 through 3.3 does not update the
aligned_end variable after calling the unicode_decode_call_errorhandler
function, which allows remote attackers to obtain sensitive information
(process memory) or cause a denial of service (memory corruption and crash)
via unspecified vectors.
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-2135
[YOCTO #3450]
(From OE-Core rev: f60d3efe93323b7056a9400a483e625a3fed4491)
Signed-off-by: yanjun.zhu <yanjun.zhu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you using a qemuppc target and sstate you might end up with
the problem:
qemu-system-ppc: error while loading shared libraries:
libfdt.so.1: cannot open shared object file: No such file or directory
The way you can force this to happen assuming you are using sstate is
as follows:
bitbake dtc-native
bitbake -c cleansstate qemu-native
bitbake qemu-native
bitbake -c clean dtc-native
Now go start qemu and it will fail. The solution is to always build
the dtc libraries since they are used and needed by the qemuppc
simulator.
(From OE-Core rev: 79c620016b0be4dacc9fcfbd4baab5ea6c66a440)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1, Use create_wrapper to create perl wrapper in the SDK.
2, Add perl.real to perl-nativesdk package.
[YOCTO #3338]
(From OE-Core rev: 643cdac63353527c1b5cb6eeabe75df8d0dc8346)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pseudo 1.5's enable-force-async works great, unless you use a host
where, inexplicably, stat(2) reports inconsistent and changing values
for a file's size or times for some time unless a file has been fsynced,
in which case you might want a way to cause an fsync to work.
Also noticed that some recent changes never made it into the docs, so
I did a little cleanup there. And changed the way NDEBUG suppresses
pseudo's debug messages, so arguments to them with possible side
effects (like calls into functions in another translation unit) can be
omitted, which should drastically reduce computational time if anyone
ever uses NDEBUG.
(From OE-Core rev: 150174d52adefdefe62e2ed0598665481591e4c2)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move run-postinsts scripts from rootfs_rpm.bbclass to rpm recipe. That
is the same way for dpkg and opkg to deal the post install scripts.
(From OE-Core rev: 04607b0cd496837f10ef78cf43597ec1d2e13f2e)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The argparse module uses the textwrapper modules contained in
python-textutils.
(From OE-Core rev: 2e9d39834ceb8cf9d9ba94940372b549fb957028)
Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to generate new disk images for ext(2,3,4) which contain root
file systems we do not want to rely on the host's genext2fs which may
have different arguments and features, so allow the nativesdk
genext2fs binary to be built.
(From OE-Core rev: b9eac9683baaeb458d70a5089cbb5e2b8149eb26)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The pseudo 1.5 update is a moderately experimental set of changes
which ought to improve performance. With these changes, pseudo
uses an in-memory sqlite database which is lushed on exit,
the protocol is changed to reduce waiting for server responses,
and pseudo can suppress any and all fsync/fdatasync type operations.
This last feature is optional, and not on by default, so we need
to pass in an extra configure argument, but that argument wouldn't
be known to an older configure, so... Enter PSEUDO_EXTRA_OPTS which
is passed to configure, and which pseudo_1.5.bb sets by default to
"--enable-force-async". (I haven't added it in pseudo_git.bb, but
maybe it should be changed; I'm not quite as sure there.)
The justification for these changes is that, for most of the real-world
build cases I deal with, they produce a 25% or more reduction in the
build time of a project. This increases when a system is heavily
loaded.
(From OE-Core rev: 79ddb0c33401da442dbaa8e0d73ebacf297d9185)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'make update' was using wget to get the gmo and other gnu files from
upstream, since need to work cleanly in a non-networked or proxy environment
this does not so well. Remove the list of languages from the LINGUAS file.
[YOCTO #3745]
(From OE-Core rev: 9987f210e3faf31bfeab35ae56606c8a577b3aa0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were seeing errors like:
| autoreconf: running: /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly/build/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf --force
| configure.ac:27: error: possibly undefined macro: AS_IF
| If this token and others are legitimate, please use m4_pattern_allow.
| See the Autoconf documentation.
| configure.ac💯 error: possibly undefined macro: AC_MSG_ERROR
| autoreconf: /srv/home/pokybuild/yocto-autobuilder/yocto-slave/nightly/build/build/tmp/sysroots/x86_64-linux/usr/bin/autoconf failed with exit status: 1
| ERROR: autoreconf execution failed.
which turns out to mean the pkgconfig macros were unavailable (thanks for clear
error messages autoconf).
This patch adds in the missing dependency.
(From OE-Core rev: 26431ffda8886412147ff347c000a0ecc2671db5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modify the include file and script to generate a missing RDEPENDS.
Install python on target with python-io. Import ssl:
Python 2.7.3 (default, Feb 9 2013, 16:04:35)
[GCC 4.7.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import ssl
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/ssl.py", line 58, in <module>
ImportError: No module named textwrap
Installing python-textutils solves the issue.
(From OE-Core rev: 900ae881c3483eea36aa0be456b93f92980f4924)
Signed-off-by: MiLo <milo-software@users.sourceforge.net>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 1.4.4 fix replaced possible double-prepending of chroot paths
with possible non-prepending of chroot paths. After significant
evaluation, have settled on a single prepending of the chroot
path as a workable compromise.
(From OE-Core rev: a79597994e3f680e34a1a45fb37d76977903ded5)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The pseudo 1.4.2 linkat() implementation had a broken edge case
in which you could end up with chroot paths being doubled when
using plain link() calls instead of linkat() calls.
(From OE-Core rev: c70443ef21713d805012ef839e3fac04de8eadd2)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you never use sstate and always build everything from scratch you
will never see this problem. However, if you use sstate and build
directories that last a long time eventually you can end up with the
scenario where libtool gets a hard coded path in it for sed, and sed
may not exist. The reason you don't see this problem to often if you
generally build from scratch is that libtool builds before sed and
will pickup the host's /bin/sed.
The way to reproduce the issue is:
bitbake some_image
bitbake -c cleansstate libtool-native
bitbake sed-native
bitbake libtool-native
bitbake -c clean sed-native
bitbake ANY_PACKAGE_THAT_USES_LIBTOOL_NATIVE
In my case I used modphp, which doesn't exist in the oe-core. You will
end up with a strange looking error like:
| make[1]: *** [buckets/apr_buckets_alloc.lo] Error 1
| /opt/build/bitbake_build/tmp/sysroots/x86_64-linux/usr/bin/x86_64-linux-libtool: line 981: /opt/build/bitbake_build/tmp/sysroots/x86_64-linux//bin/sed: No such file or directory
The solution is to always use /bin/sed for libtool-native.
(From OE-Core rev: 605e4484840e70c64acddb4aa1a3c9fec4078d9d)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apt does not recognize the architecture if a different one is set with
DPKG_ARCH (e.g. armel). This patch writes the correct architecture to
/etc/apt/apt.conf.
(From OE-Core rev: 81b8c36641994dc7a4e025f2d43f9ce57d04b6f0)
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@netmodule.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of a python backtrace, tell the user they need to install PyYAML
if they wish to use the --yaml output options.
Fixes [YOCTO #3768].
(From OE-Core rev: 69caf24112c11609eb351bea09817029bca0ff2e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
See: http://savannah.gnu.org/bugs/?30653
This only shows up for projects which have a number of intermediate
targets. For me, systemd fails to build without this patch, and does
build consistently with it.
WebKitGtk+ is another known affected project.
(From OE-Core rev: 1747a70f95ead49985eeaf16c28e818ed5b109cd)
Signed-off-by: Colin Walters <walters@verbum.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* sometimes it's autodetected and fails to build:
| /usr/bin/ld: libcacard/.libs/cac.o: Relocations in generic ELF (EM:40)
| libcacard/.libs/cac.o: could not read symbols: File in wrong format
| collect2: ld returned 1 exit status
| make[1]: *** [libcacard.la] Error 1
(From OE-Core rev: acb0e56d79cfaa606ccd0a075a7c78ede172da86)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This updates to pseudo 1.4.3. Changes:
1. A couple of minor tweaks to reduce difficulties using SDKs built
on slightly more recent machines on older machines; specifically,
avoiding getting @GLIBC_2.7 symbol references for sscanf(), fscanf(),
and open2().
2. Revision of the logic determining the library directory to use for
sqlite's library files.
The latter is a source of difficulty because it's come up a few times
that we may want pseudo to use lib64 for libpseudo.so, but bitbake's
usual setup would have libsqlite3.a in lib regardless of bit width.
Cleaned up previous design a bit by providing a distinct setting for
sqlite-lib, which defaults to the same library directory used for other
things. Adjusted build to use this new setting. (This ends up being
${baselib}; on targets, that might not be lib, but for native builds
it generally is, and for SDK builds it appears to do the right thing.)
Testing: Successful build of meta-toolchain for both 64-bit and 32-bit
SDKMACHINE, and builds with NO32LIBS = "0" also succeeded. Also builds
for multilib targets.
(From OE-Core rev: ae8811bb26fba2e71d7280f6d6c4f5cec6a2871b)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need the files to be tracked by sstate so we need to jump through
some hoops to ensure this happens. The cross bindir directory
isn't staged automatically so we need to handle this outselves.
(From OE-Core rev: 743d5233747d0a107490b31ea3da151ea1ace3ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since /var/cache is not in volatiles anymore, this entry has to go.
(From OE-Core rev: ed31c6442309eb2816e96d8565b52cf7cc28c803)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will just install a wrapper script in STAGING_BINDIR_CROSS that
will execute the proper qemu user binary for the current target.
[YOCTO #2599]
(From OE-Core rev: faaa5e7fd4353b73289f163d9f601cf0869698f3)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add obsolete_automake_macros.patch that replaces automake macros
no longer supported by automake-1.13 with modern constructs.
(From OE-Core rev: 495bea3911be164225c91b696389fc16dab356fd)
Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it's not recommended to change this value, because it breaks upgrade path on target
(all old u-a alternatives are forgot in old OPKGLIBDIR value
* but make it consistent, so if someone really want to change that, then
setting OPKGLIBDIR_distro in distro.conf would be enough
* without this there were at least 4 places to change:
rootfs_ipk: opkglibdir variable (notice that I've removed /opkg from it to correspond
with EXTRA_OECONF option used in opkg recipes
package_ipk: ${target_rootfs}${localstatedir}/lib/opkg/ hardcoded in
package_install_internal_ipk
opkg-collateral: value in lists file
opkg: EXTRA_OECONF for all 3 classes, FILES_libopkg, do_install
* validated with buildhistory that without OPKGLIBDIR explicitly set the
output is the same and that after setting
OPKGLIBDIR_forcevariable := "${libdir}"
everything including empty directory from package_ipk is moved to
libdir
(From OE-Core rev: cf0aa9c4fdae8855803e96b1922d54a2431795d3)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- use ${libdir} instead of ${exec_prefix}/lib
Fix the following warning:
WARNING: QA Issue: gcc: Files/directories were installed but not shipped
/usr/lib64/libiberty.a
(From OE-Core rev: b3643415ad91dc77880cc5b95e9ad8cd9aef5c44)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the following warning:
WARNING: QA Issue: lib32-run-postinsts: Files/directories were installed but not shipped
/usr/share/lib32-run-postinsts
/usr/share/lib32-run-postinsts/run-postinsts.awk
[YOCTO #3438]
(From OE-Core rev: fb42fae0f6eb9821b5f1fedfaebf4307dc6590fe)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the following warning:
WARNING: QA Issue: lib32-syslinux: Files/directories were installed but not shipped
/usr/lib
/usr/share/syslinux
/usr/share/syslinux/com32
/usr/share/syslinux/com32/libcom32gpl.a
/usr/share/syslinux/com32/libcom32.a
...
[YOCTO #3438]
(From OE-Core rev: 0d014d0f42de4af76226799b04c8a2daa52f787e)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the following warning:
WARNING: QA Issue: lib32-sgml-common: Files/directories were installed but not shipped
/etc
/etc/sgml
/etc/sgml/sgml.conf
/usr/bin
/usr/bin/install-catalog
/usr/bin/sgmlwhich
[YOCTO #3438]
(From OE-Core rev: 1a43fba81749618f9f1c18b99cb74ae1399bdc35)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set the RDEPENDS on the specific package that has the dependency and stop it
being applied to for example ${PN}-doc (and others).
(From OE-Core rev: 51257c8665282e2b7f647adb4bdf8d07e2b40e1c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set the RDEPENDS on the specific package that has the dependency and stop it
being applied to for example ${PN}-doc (and others).
(From OE-Core rev: 3c57a755ff1aec3806770443b73dc899d981c678)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
configure touches pkg-config for various tests so we need the DEPENDS
which we can gain from the class inherit
(From OE-Core rev: 2602575108a39723f9975391e83290573cbd2ec9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
git-core provides the following routines (among others): git-sh-setup,
cd_to_toplevel, die, and more. But it is not always in the same location
relative to the guilt binary if git is not part of a 'host tools'
sysroot. Modern git versions don't need this, so commenting it out (until it
breaks again) is the solution to the problem of it not existing, and the
library routines will sourced and provided by git itself.
Since bitbake.conf has git-native as ASSUME_PROVIDED, this means that
when the system git binary is used, errors such as this can be seen in
failed patch logs:
| /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/guilt: line 29: /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/../libexec/git-core/git-sh-setup: No such file or directory
| /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/guilt: line 717: cd_to_toplevel: command not found
| error: patch failed: Makefile:2
| error: Makefile: patch does not apply
| /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/guilt-push: line 137: die: command not found
| [ERROR] unable to complete push
| pending patches are:
| /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/guilt: line 29: /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/../libexec/git-core/git-sh-setup: No such file or directory
| /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/guilt: line 29: /opt/poky/build/tmp/sysroots/x86_64-linux/usr/bin/../libexec/git-core/git-sh-setup: No such file or directory
| links/linux-yocto-custom/0001-linux-version-tweak.patch
| ERROR. could not update git tree
With the export removed, we have a normal "clean" failure message when
the sysroot or system git is used.
(From OE-Core rev: 9ca697a7f83957205bc418acfd7f45fe4cbddbee)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- changed the archive extension because it changed
on the repository.
(From OE-Core rev: 7eb31a99925af3cc4ca9c322d1c988124cc812db)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added two new flags to the configure script:
--disable-Werror: don't treat all warnings all errors (which breaks compilation).
PYTHON=/dev/null: this prevents distcc from detecting the host Python and trying
to build its include server using the host Python. This disables the include
server completely. If the include server is needed, that should be the object of
another patch (and would introduce a dependency on python for distcc).
The 'distcc-avahi' and 'makefile-param-order' patches are not needed anymore, as
they were merged upstream.
(From OE-Core rev: 3f33a6ecd9f1703381e175d688bdfce291ffdc8a)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- removed the usage of the patches already contained in the new version
- adapted patch remove.ldconfig.call.patch so that it applies on new version
(From OE-Core rev: 7ceba1eb102b3f855f561764833f8a7a407b7785)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- add a task to setup multilib configuration for target gcc
- this commit adapts Nitin Kamble's work to gcc 4.7
- use a hash for storing arch-dependent multilib options
- patch gcc in order to use the multilib config files from the
build directory
Tests:
root@qemux86-64:~# gcc -m64 t.c -o t
root@qemux86-64:~# file t
t: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.16, not stripped
root@qemux86-64:~# ./t
Hello World !
root@qemux86-64:~# gcc -m32 t.c -o t
root@qemux86-64:~# file t
t: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.16, not stripped
root@qemux86-64:~# ./t
Hello World !
[YOCTO #1369]
(From OE-Core rev: b26819c85881e82ee1b5c68840011e78c321f18e)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To fix some multilib issues, change the way the RPM backend decides
if two packages can coexist: if they have a different architecture,
automatically assume that they can coexist (which is fundamental for
multilib).
[YOCTO #3681]
(From OE-Core rev: 05fd850f09c58dba8f64f3fe1de28ed9f21890a2)
(From OE-Core rev: 03c892a02568fa8a5765d9fb569a55f17ea05f96)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
flex tries to execute:
/data/oe/build/tmp-eglibc/sysroots/x86_64-linux/usr/bin/m4
As workaround you can:
mkdir -p /data/oe/build/tmp-eglibc/sysroots/x86_64-linux/usr/bin/
ln -s /usr/bin/m4 /data/oe/build/tmp-eglibc/sysroots/x86_64-linux/usr/bin/
So this is a bug how OE builds flex.
flex tries to execute:
/data/oe/build/tmp-eglibc/sysroots/x86_64-linux/usr/bin/m4
As workaround you can:
mkdir -p /data/oe/build/tmp-eglibc/sysroots/x86_64-linux/usr/bin/
ln -s /usr/bin/m4 /data/oe/build/tmp-eglibc/sysroots/x86_64-linux/usr/bin/
So this is a bug how OE builds flex.
https://bugs.launchpad.net/linaro-aarch64/+bug/1106865
(From OE-Core rev: 215bcc780d9bc4a7d96d1c706db80abe4ef659dd)
(From OE-Core rev: 7bdb617f2f0e246feb4dc32931fdb87258fd1207)
Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Invoking dpkg-scanpackages on Fedora 17 to build deb image meets such an error:
Can't locate Dpkg.pm in @INC (@INC contains: /usr/local/lib64/perl5 /usr/loc
al/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr
/lib64/perl5 /usr/share/perl5.) at tmp/sysroots/x86_64-linux/usr/bin/dpkg-sca
npackages line 27.
1. The dpkg-scanpackages is invoked at deb image creation time and it is built
by dpkg-native. The dpkg-scanpackages is a perl script and import module `Dpkg'.
2. The Dpkg.pm has been installed in perl's staging dir at dpkg-native compiling
time. Such as `tmp/sysroots/x86_64-linux/usr/lib/perl-native/perl/Dpkg.pm'
3. The dpkg-native uses create_wrapper to relocate to perl-native if perl-native
has been built. If perl-native isn't built, it will use the host Dpkg as default.
4. If dpkg-native is built on a new build envionment which means perl-native doesn't
exist before, and the build system doesn't install dpkg (such as Fedora 17), the
dpkg-scanpackages could not work correctly.
5. Modify dpkg-native's depends, change `perl-native-runtime' to `perl-native', Let
perl-native automatically be built before building dpkg-native.
[YOCTO #3817]
(From OE-Core rev: 7d194e72ee12cb6690bf07a8423cb461dd210719)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows one not to install rarely used or fs specific files
As discussed in http://thread.gmane.org/gmane.comp.handhelds.openembedded.core/31744/focus=31804
(From OE-Core rev: ca9d10543f22b60ba32fd78130970591782b880c)
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* move libgomp.info removal also outside that for cycle, can be removed outside if exists
* also use infodir variable instead of ${datadir}/info
(From OE-Core rev: 0b8fe539928c7a61ca01a4a0a0f54df47164ac6c)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't have support for this in OE-Core, so ensure we don't pick this
up from the build host if e.g. openmpi development files happen to be
installed there.
Fixes [YOCTO #3726].
(From OE-Core rev: cc490d76aba0a778409ca1a3d0e1f2c308684c9b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
${libdir} is not applicable for the install path of perl-native files,
files are always installed to /usr/lib no matter the target is 32/64
bits. After installing, remove unpackaged and unneeded perl-native
files to prevent warnings.
Fix warning:
WARNING: For recipe git, the following files/directories were \
installed but not shipped in any package:
...
WARNING: /usr/lib/perl-native/perl/5.14.2/Git.pm
WARNING: /usr/lib/perl-native/perl/5.14.2/perllocal.pod
WARNING: /usr/lib/perl-native/perl/5.14.2/Error.pm
WARNING: /usr/lib/perl-native/perl/5.14.2/auto
[YOCTO#3780]
(From OE-Core rev: cc6b8261fa47a049e501882e9bfc40f61e603b6f)
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a securty issue:
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-5195
Update perl to 5.14.3 to resolve this problem.
Patches hurd-ccflags.diff, h2ph-multiarch.diff, index-tainting.diff and
hurd-hints.diff have been merged, so remove them from SRC_URI.
Update patches config.sh and Makefile.SH.patch with new PV.
[Yocto 3701]
(From OE-Core rev: b1fd25e05308cabb56afe1d4276470bf7380ea59)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a securty issue:
http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2012-5195
Update perl to 5.14.3 could resolve this problem. And update perl-native
first.
(From OE-Core rev: 360401af6e7729a373d0a6d13995714aff121064)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, do_rootfs has a dependency on all the do_package output being present
due to its usage of the pkgdata directories. This means that if you run:
bitbake xxxx-image -c rootfs
you end up having to fetch and unpack all the do_package data which is usually
large and inefficient. It also means rm_work has to leave all the do_package
data lying around so rootfs works.
This patch splits the actual creation of the pkgdata directory off into a separate
task, "packagedata" which happens immediately after do_package. We can then remap
the dependencies so this task is depended upon, not do_package. Sstate can then be
programmed not to require do_package at the appropriate times.
Whilst this patch doesn't do so, it opens the possibility of rm_work wiping
out the do_package output from WORKDIR as long as it also removed the do_package
stamp (both normal and setscene variants) and allowing more space savings
with rm_work which has been regularly requested.
(From OE-Core rev: 6107ee294afde395e39d084c33e8e94013c625a9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Multicore embedded systems are getting more and more common.
Remove "--disable-openmp" from the GCC configuration options and
always build libgomp. This only creates a "bigger" compiler but
has no effect on the compiled binaries that don't use openmp.
Tested a clean build on mips32el and arm7a, no problems encountered.
Autoconf will not detect OpenMP after this change, because it will
build and run a target binary on the build system. In order to use
OpenMP, the variable ac_cv_prog_c_openmp=-fopenmp must be set.
(From OE-Core rev: fdf37b792c13a1fc3f63faf471f0403396414a35)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rearrangement of various file contents left these empty modules which
don't get packaged and hence lead to image creation errors on anything using
them. This patch ensures the dependencies are attached to the packages
which contain the config files or the build module infrastructure as
appropriate. It also resolves some confusion over whether the name is
perl-module-build or perl-module-module-build, the latter being the
autogenerated dependency which previously couldn't be found.
(From OE-Core rev: 442f161ecd498513b72e7f1ca2668325c9389d24)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patch perl to allow builds to work where a native perl running against target modules
attempts to load a dynamic binary module. We assume that a native version of the
module exists as it would for the target and perform an appropriate path
substitution.
(From OE-Core rev: b5ea12fec329fe419bc3672ed1e1d5733ff2a9d3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Apply the errno_ver.diff patch to the native perl version. This ensures that when
we're building target modules, running the native perl binary but in a target
configuration we don't see error messages.
libencode-detect-perl is a module which tests this.
(From OE-Core rev: 52354c863a1a2e467ea1b55168bf4273f31bbba4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't want the perl module dependencies being added to each package
by rpmdeps because it causes too many problems when the modules aren't
available at install time (since they get added in do_package which is
too late for the build system to ensure they are available), and it
appears that the perl dependency gathering isn't working reliably in any
case judging by how they are detected on some build hosts and not
others.
This was being disabled previously but it seems like the macros moved
to a different file at some point and nobody noticed; thus make sure we
disable the macros in all RPM macro files.
Should fix [YOCTO #3699].
(From OE-Core rev: e43a72af9055b76eb2ad7e2e42e6a5f3c8854efa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If configure of perl is reattempted it currently fails as it tries to edit
files outside ${S}. Chaging from ${WORKDIR} to ${S} avoids this issue
and allows rebuilds to work.
(From OE-Core rev: 1b66c30eb6085aedce118ce086efbd2e562d0d6c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this some software fails to build complaining it can't find these
utilities.
(From OE-Core rev: db84eaf851b22b262d9dc48eb55bd5224a00fdd2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating guilt to allow git 1.8.x as a supported version. This version has
no impact on other functionality within the scripts, so no other adjustments
are necessary.
[YOCTO #3275]
(From OE-Core rev: 18bc7b44ef58cbcbe32d45504d71eed54ef695a4)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It shows warning when bitbake perl:
WARNING: QA Issue: perl: Files/directories were installed but not
shipped
/usr/lib/perl/5.14.2/auto/XS/Typemap
That because file Typemap.so is not install correctly. Fix it.
(From OE-Core rev: d4c3cc8cff9311ff873304410e3092921dbe6ddc)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>