The script detects directory renaming if two different
directories with the same set of files are added and removed.
[YOCTO #10691]
(From OE-Core rev: 944db779a9f45cbeeebc976c00da37a517eea237)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some c++ libraries fail to build if uninative is built
with gcc 5.x and host gcc version is either 4.8 or 4.9.
The issue should be solved by making separate uninative sstate
directory structure sstate-cache/universal-<gcc version> for host gcc
versions 4.8 and 4.9. This causes rebuilds of uninative if host gcc
is either 4.8 or 4.9 and it doesn't match gcc version used to build
uninative.
[YOCTO #10441]
(From OE-Core rev: d36f41e5658bbbb6080ee833027879c119edf3e0)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add test case that verify behavior of postinst scripts at
roofts time and when is delayed to the first boot directly
on the target.
(From OE-Core rev: 82b171f3b37e6733997fc1e7685b7cac5a3476e7)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It verifies the following:
1. Compile a minimal image.
2. The compiled image will add the layer with the recipe postinst,
previously created at:
"meta-selftest/recipes-test"
3. Run QEMU.
4. Validate the task execution order.
[YOCTO #5319]
(From OE-Core rev: a8ff789a3bfedcbc4358db7907a45270d8b1b76a)
Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These tests don't get ran often (as demonstrated by the fact that some were not
ported to Python 3), so move them to oeqa/selftest so they get executed
frequently and can be extended easily.
[ YOCTO #7376 ]
(From OE-Core rev: 2001979ad41e6fdd5a37b0f90a96708f39c9df07)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poky-tiny cannot build core-image-sato, so skip test (read-only-image)
in this case.
(From OE-Core rev: bcee8c614f28b38054f5d8c1c5251b3702cf113c)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Preferred kernel recipes depends on the distro, so remove the kernel
checks to avoid failures on non-poky distros and make the test
distro agnostic.
(From OE-Core rev: ae92b72990b3ac804791b501d08126491fdddb7c)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
poky-tiny distro cannot build full-cmdline image, so use an image
(core-image-minimal) that can be built in all distros.
(From OE-Core rev: b293dd4200bbb3705c88af6113be7f43fbd0ed72)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of quering it multiple times, query once and use it on
test method skip checks. Also, rename current distro sstate object
member to a more meaninful name.
(From OE-Core rev: bde9d99575a63ad2d7fd5974ce6ce19aad9a8984)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 9d55e9d489 broke calling get_bb_vars()
when called without arguments. This fix this issue.
(From OE-Core rev: 91f856426c7523e1ebdf6d6f93f5fa7e509d6e49)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add some tests to verify that the new tinfoil API is operating
correctly.
(From OE-Core rev: 16afda66b861ba028c1152dcdcab2b7ebfbff965)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Check that man .in file actually gets modified, since sed -i doesn't
fail if it it doesn't
* Use a variable for man file path
(From OE-Core rev: 9ad36e945fa5b03726f78ba99e823eade8daa710)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was intended to be used with tinfoil, but tinfoil now has its own
parse_recipe() method to do this which works properly in the memres
case.
(From OE-Core rev: cdfc6173cb06ca374b7d927442a0fdde8373ba48)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move patch_path(), src_patches() and should_apply() to oe.patch, making
them easier to call from elsewhere (particularly across the
UI/server boundary).
(From OE-Core rev: 2724511e18810cc8082c1b028e3b7c8a8b5def56)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use tinfoil.parse_recipe() in order to allow oe-selftest to be used in
memres mode.
(From OE-Core rev: 499ee9006271112f22cfe08fa5ba5c21be95380b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't need to see the parsing/cache loading message in the
oe-selftest output, so use the newly added quiet option to disable it.
(From OE-Core rev: c023bc55ff000d1de891d1a8e2a163e94bf63de6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We now have a function in cooker itself that can do this lookup;
additionally, the rewritten tinfoil's cooker adapter has its own
implementation that can work remotely, so if we use it then this
function can work in that scenario as well.
(From OE-Core rev: 0a6a4be99c1e4ef3c0da53d63f18ad579545d6a8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you printed a warning through bb.warn() / bbwarn or an error through
bb.error() / bberror, this was also being picked up by our log_check
mechanism that was designed to pick up warnings and errors printed by
other programs used during do_rootfs. This meant you saw not only the
warning or error itself, you saw it a second time through log_check,
which is a bit ugly. Use the just-added BB_TASK_LOGGER to access the
logger and add a handler that we can use to find out if any warning or
error we find in the logs is one we should ignore as it has already been
printed.
Fixes [YOCTO #8223].
(From OE-Core rev: fb37304d27857df3c53c0867e81fbc8899b48089)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We were calling _log_check() in the RPM-specific rootfs class as well as
in the base class; this is unnecessary and resulted in any errors/warnings
generated during the actual package installation time triggering two warnings
instead of one. Drop the call from RpmRootfs._create() to fix this.
(From OE-Core rev: 541c56d755ba0354297673e857628026ad9e4df2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some variables in pkgdata files have a package-name override. When
the bare variable can not be found, try with the override-variant.
PKGSIZE is one such variable, and already had special code to handle this.
Test included.
(From OE-Core rev: 6df99cda894033cba68bc6ab91e47f67e0d788a5)
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Joule is very new hardware and there is ongoing kernel and firmware
work to fix these issues, which will be available in future kernel and
firmware releases. In the meantime, don't clog QA reports.
[YOCTO #10611]
(From OE-Core rev: facf9fa905100945738c13f9f79e938ed4a81030)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some virtualized environments like Linux-VServer do not have the
entries under /proc that the new system usage sampling expected,
leading to an exception when trying to open the files.
Now the presence of these files is checked once before enabling the
corresponding data collection. When a file is missing, the
corresponding log file is not written either and pybootchart will not
draw the chart that normally displays the data.
Errors while reading or writing of data samples is intentionally still
a fatal error, because that points towards a bigger problem that
should not be ignored.
Reported-by: Andreas Oberritter <obi@opendreambox.org>
(From OE-Core rev: daeee2d6731014c33f0d1f8a3846830c099932b4)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Test that recipetool plugins are loaded in a well defined order.
(From OE-Core rev: 044de8424a454a7057906e44eb56e2134ebb17e4)
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Test that devtool plugins are loaded in a well defined order.
(From OE-Core rev: 0de81f0c8b29d8b442b3d099c3bec3fd345b6bfe)
Signed-off-by: Ola x Nilsson <ola.x.nilsson@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds functions to get metadata from the host running the tests.
[YOCTO #9954]
(From OE-Core rev: 10b05794254886e55c76f29f7778d783c550befa)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The function get_bb_vars will remove items for the list passed
as the function argument, this will leave the caller with an
empty list and the function never says it will consume the items.
This hasn't been found before because only get_bb_var uses this
function.
(From OE-Core rev: 22b7fa24fefcc3974806d1b282c93b8c5880f6a4)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ClassType was removed from python3.
The code testing for ClassType kept throwing AttributeError exceptions:
module 'types' has no attribute 'ClassType'
The exceptions prevented loading of any dynamically resolved target
controllers.
(From OE-Core rev: d62f18c39bc0ed3b0f5ac8465b393c15f2143ecf)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using subprocess call and check_output, it is better to use arrays
rather than strings when possible to avoid whitespace and quoting
problems.
[ YOCTO #9342 ]
(From OE-Core rev: b12cec9a5ef14ecb02be7feec65508cf5d65c795)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting WKS_FILE variable in qemux86-64 made wic test to
use wrong wks file to produce an image and resulted in
test_qemu failure.
Used conditional assignment in qemux86-64 and explicitly
set WKS_FILE in wic testing suite to make the suite to use
wic-image-minimal.wsk. This should fix test_qemu failure.
(From OE-Core rev: 3bca4d18c2712e3b154bacfb917f0a749ebaddeb)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pre-processing /proc data during the build considerably reduces the
amount of data written to disk: 176KB instead of 4.7MB for a 20
minuted build. Parsing also becomes faster.
The disk monitor log added another 16KB in that example build. The
overall buildstat was 20MB, so the overhead for monitoring system
utilization is small enough that it can be enabled by default.
(From OE-Core rev: b17812385cd55e81066d3ceda92dffdc6e5564da)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hooks into the new monitordisk.py event and records the used space for
each volume. That is probably the only relevant value when it comes to
visualizing the build and recording more would only increase disk
usage.
(From OE-Core rev: 21a5b569370f47cc02291e1d8b76fe43faa04ea6)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
/proc/[diskstats|meminfo|stat] get sampled and written to the same
proc_<filename>.log files as during normal bootchat logging. This will
allow rendering the CPU, disk and memory usage charts.
Right now sampling happens once a second, triggered by the heartbeat
event.That produces quite a bit of data for long builds, which will be
addressed in a separate commit by storing the data in a more compact
form.
(From OE-Core rev: 6f4e8180b5b4857eaf6caf410fd3a4a41ed85930)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The warning occurs when the GPT image is not the same size than the
media into which it's being flashed, causing the backup GPT table
not being at the end of the disk. However, this is expected as the
image is created before having the information about the destination
media. The error is harmless, so it will be whitelisted.
Fixes [YOCTO 10481].
(From OE-Core rev: 5cc5cdc788308a79f8f0706e6d794c602ef427ed)
Signed-off-by: Jair Gonzalez <jair.de.jesus.gonzalez.plascencia@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The iwlwifi module of any given kernel has a minimum and maximum
supported firmware version. The kernel begins by attempting to load the
maximum version, and decrements until it is successful. The 4.8 kernel's
maximum supported firmware version is 24, but thus far only 22 has been
released, meaning we get errors for 24 and 23.
Filter out iwlwifi firmware load error messages, as they are not
necessarily indicative of real problems.
(From OE-Core rev: 7df570c2310efac8f9898da15deaac2b7df16655)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Based on run() in bitbake/lib/bb/process.py, ExecutionError() expects strings
not bytes. Passing bytes results in a "TypeError: Can't convert 'bytes' object
to str implicitly" exception.
Fixes Bug 10729
(From OE-Core rev: 063b63d4d324c23322ac1b6b7c7928e725d7b968)
Signed-off-by: Martin Vuille <jpmv27@yahoo.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update test case numbers on runtime tests to do match
with templates defined on Testopia for 2.3 release
(From OE-Core rev: d9df762b4c62b74f6d3a1521642ea86c26793a22)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test has been ported to be run as part of Toaster's own tests.
(From OE-Core rev: f6366781a34dbdb8ec2d73f4fb36359bc15c4f42)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was already whitelisted, but the 4.8 kernel changed the error
message, causing it to get caught by parselogs again.
Fixes [YOCTO #10494].
(From OE-Core rev: e1bad14231115f3b1a2bf844ef5b2022c648b55d)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some rolling release distros, such as Arch Linux, don't include a
VERSION_ID field in their os-release file.
Change release_dict_osr() to better handle this optional field
being absent.
Further improve the resilience of the release_dict_*() methods by
always returning a dict and using dict.get() in distro_identifier()
to supply a default, empty string, value when then key is missing.
(From OE-Core rev: e36066dcc3b56cac1c695370ea178b566c0ebfd6)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The hello-mod recipe is unusual in that it has only local files in
SRC_URI and builds these out of ${WORKDIR}. When you use devtool modify
on it, devtool puts all of those files in an "oe-local-files"
subdirectory of the source tree, which is not ${S} (or ${B}) any more
and thus building the recipe afterwards fails. It's a bit of a hack, but
symlink the files in oe-local-files into the source tree (and commit the
symlinks with an ignored commit so that the repo is clean) to work
around the problem. We only do this at time of extraction, so any files
added to or removed from oe-local-files after that won't be handled, but
I think there's a limit to how far we should go to support these kinds
of recipes - ultimately they are anomalies.
I initially tried a hacky workaround where I set effectively set B =
"${WORKDIR}" and that allowed it to build, but other things such as the
LIC_FILES_CHKSUM checks still broke because they expected to find files
in ${S}. Another hack where I set the sourcetree to point to the
oe-local-files subdirectory works for hello-mod but not for makedevs
since whilst that is similar, unlike hello-mod it does in fact have
files in the source tree (since it has a patch that adds COPYING) and
thus the same issue occurred.
Also tweak one of the tests that tries devtool modify / update-recipe on
the makedevs recipe to try building it since that would have caught this
issue.
Fixes [YOCTO #10616].
(From OE-Core rev: 857c06d6a1d161bf5a01311d07758bd4241929a3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When attempting to run devshell, if no terminal is available, the
error being thrown was not very specific. This adds a list of
commands that failed, informing the user of what they can install to
fix the error.
[ YOCTO #10472]
(From OE-Core rev: c077f4aab2fc956408d4ad45c4e2e2ea6e480624)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you have a file:// entry in SRC_URI with a subdir= parameter that
makes it extract into the source tree, then when you update that file in
oe-local-files and run devtool update-recipe then you want the original
file to be updated. This was made to work by OE-Core commit
9069fef5dad5a873c8a8f720f7bcbc7625556309 together with
31f1bbad248c36a8c86dde4ff57ce42efc664082, however until now there was no
oe-selftest test to verify it.
Note that in order to succeed this test also requires the fix
"lib/oe/recipeutils: ignore archives by default in
get_recipe_local_files()" since the test recipe uses a local tarball.
(From OE-Core rev: 936eba3e1059d1dcd5e58c1ce76870fff7b11b3c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default, have get_recipe_local_files() not return any archive
files. This prevents a local tarball from being erroneously removed
from SRC_URI if you run "devtool modify" on a recipe followed by
"devtool update-recipe". It doesn't actually help you to directly
update the contents of such tarballs, but at least now it won't break
the recipe.
(From OE-Core rev: e9c418d4704c1bed4c5880e176e5288485f4f5a6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is possible to use gzip or bzip2 to compress patches and still refer
to them in compressed form in the SRC_URI value within a recipe. If you
run "devtool modify" on such a recipe, make changes to the commit for
the patch and then run devtool update-recipe, we need to correctly
associate the commit back to the compressed patch file and re-compress
the patch, neither of which we were doing previously.
Additionally, add an oe-selftest test to ensure this doesn't regress in
future.
Fixes [YOCTO #8278].
(From OE-Core rev: e47d21624dfec6f71742b837e91da553f18a28c5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a patch applied by a recipe has no header and we turn the recipe's
source into a git tree (when PATCHTOOL = "git" or when using devtool
extract / modify / upgrade), the commit message ends up consisting only
of the original filename marker ("%% original patch: filename.patch").
When we come to do turn the commits back into a set of patches in
extractPatches(), this first line ends up in the "Subject: " part of
the file, but we were ignoring it because the line didn't start with the
marker text. The end result was we weren't able to get the original
patch name. Strip off any "Subject [PATCH x/y]" part before looking for
the marker text to fix.
This caused "devtool modify openssl" followed by "devtool update-recipe
openssl" (without any changes in-between) to remove version-script.patch
because that patch has no header and we weren't able to determine the
original filename.
(From OE-Core rev: d9971f5dc8eb7de551fd6f5e058fd24770ef5d78)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a test to ensure devtool update-recipe works properly on recipes
that contain only local files (since the other tests we have didn't test
that).
Relates to [YOCTO #10563].
(From OE-Core rev: bdc844b3f0c3fbddcd3523095899a5bd29797704)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The debian policy manual and MaintainerScripts wiki page states that the
postinst script is supposed to be called with the `configure` argument
at first install, likewise the preinst script is supposed to be called
with the `install` argument on first install.
https://www.debian.org/doc/debian-policy/ch-maintainerscripts.htmlhttps://wiki.debian.org/MaintainerScripts
(From OE-Core rev: 3d9c3aae54589794ce3484fa1b21d1af2bd32661)
Signed-off-by: Linus Wallgren <linus.wallgren@scypho.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The LSB Distributor ID and os-release NAME differ for most of the
distributions tested by the Yocto Project (CentOS, Debian, Fedora,
openSUSE and Ubuntu) however for all but openSUSE the os-release ID
matches the LSB Distributor ID when both are lowered before
comparison.
Therefore, in order to improve the consistency of identification of
a distribution, switch to using the os-release ID and converting
the ID value to lowercase.
Table showing comparison of LSB Distributor ID to os-release fields NAME
and ID for current Yocto Project supported host distributions:
Distribution | Version | Distributor ID | NAME | ID |
-------------------------------------------------------------------------
CentOS | 7 | CentOS | CentOS Linux | centos |
Debian | 8 | Debian | Debian GNU/Linux | debian |
Fedora | 23 | Fedora | Fedora | fedora |
Fedora | 24 | Fedora | Fedora | fedora |
openSUSE | 13.2 | openSUSE project | openSUSE | opensuse |
openSUSE | 42.1 | SUSE LINUX | openSUSE Leap | opensuse |
Ubuntu | 14.04 | Ubuntu | Ubuntu | ubuntu |
Ubuntu | 16.04 | Ubuntu | Ubuntu | ubuntu |
[YOCTO #10591]
(From OE-Core rev: 8689e5618d45c2119134ea64754430c06a93ea09)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
os-release(5) is an increasingly standard source of operating system
identification and more likely to be present on modern OS deployments, i.e.
many container variants of common distros include os-release and not the
lsb_release tool.
Therefore we should favour parsing /etc/os-release in distro_identifier(),
try lsb_release when that fails and finally fall back on various distro
specific sources of OS identification.
(From OE-Core rev: fc4eddecddec68d03a985086fa32db40ad0c7bfc)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than have the distro_identifier method look for different keys in
the dict depending on the source ensure that each function for retrieving
release data uses the same key names in the returned dict.
(From OE-Core rev: 2ddd6ddaf0c5ba14ae83347eba877ac9ef179c76)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ELF parser was assuming that the segment tables are in the first 4kb of the
binary. Whilst this generally appears to be the case, there have been instances
where the segment table is elsewhere (offset 2MB, in this sample I have). Solve
this problem by mmap()ing the file instead.
Also clean up the code a little whilst chasing the problem.
(From OE-Core rev: a66660aa5bb709547ce0b65a4563e4217c3c3d9f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There's no need to import glob inside copyhardlinktree() as it's
already imported for the entire path module.
(From OE-Core rev: 42dc4695da136a15bebb7525b1da5c2722b10a28)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of checking against a file that represents a distribution that hasn't
existed for years, fetch package names for Clear Linux instead.
[ YOCTO #10601 ]
(From OE-Core rev: 006c4db0974c42ff0f6950dd24e61c008f801679)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you run devtool add on a source tree we attempt to figure out the
correct name and version for the recipe. However, despite our best
efforts, sometimes the name and/or version we come up with isn't
correct, and the only way to remedy that up until now was to reset the
recipe, delete the source tree and start again, specifying the name this
time. To avoid this slightly painful procedure, add a "rename"
subcommand that lets you rename the recipe and/or change the version.
(From OE-Core rev: 9303d8055c45a0f6af295d70a6f6a8b9d8d8a7c9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a variable is being set in the recipe when we've explicitly passed
None as the value to _test_recipe_contents() indicating that it
shouldn't be set at all, then we should be printing out the variable
name in the assertion message but it seems like I forgot to do a
substitution. Also include the value for informational purposes.
(From OE-Core rev: 0dafcb158003fb13f82c266f607d9967fca321db)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
recipetool sets the LICENSE value based on licenses detected from the
source tree. If there are multiple licenses then they were being
separated by spaces, but this isn't actually legal formatting and if
you're using "devtool add" you get a warning printed when devtool
parses the recipe internally.
Earlier I had made a conscious decision to do it this way since it's up
to the user to figure out whether the multiple licenses should all apply
(in which case they'd be separated with &) or if there is a choice of
license (in which case | is the correct separator). However, I've come
to the conclusion that we can just default to & and then the ugly
warning goes away, and it's the safest alternative of the two (and most
likely to be correct, since it's more common to have a codebase which is
made up of code with different licenses, i.e. all of them apply to the
combined work).
I've tweaked the comment that we add to the recipe to explicitly state
that we've used & and that the user needs to change that if that's not
accurate.
Fixes [YOCTO #10413].
(From OE-Core rev: ecac6aee8cf3313350b58c21012bcd67cfb915e4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This library suffered as part of the Python 2 to Python 3 migration and stopped
working entirely.
Fix all the migration problems such as files being treated as strings but opened
in binary mode, insufficient use of with on files, and so on.
Rewrite large amounts to be Pythonic instead of C-in-Python.
Update OpenSuse and Fedora URLs.
Fedora now splits the archive alphabetically so handle that.
[ YOCTO #10562 ]
(From OE-Core rev: 58de12eaaac9c60bb8fc84a3a965ef86d2a39ae0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you use devtool update-recipe with the --append option, and a "local"
(in oe-local-files) has been modified we copy it into the specified
destination layer. With the way the devtool update-recipe code works now
the source is always a temp directory, and printing paths from within
that is just confusing, so if the path starts with the temp directory
then just print the file name alone.
(From OE-Core rev: 61475f0267d40c618ebf36023d0b6414a25975cb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Do not use --force-depends when trying to remove all dependent packages,
as it removes only the selected package and not the dependent packages.
(From OE-Core rev: a82e8725902086dab785a0b14305927dae1e4e8d)
Signed-off-by: Samuli Piippo <samuli.piippo@qt.io>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When there is a relative symlink in the layer, for example:
symA -> ../out/of/layer/file
symA will be invalid fater copied, it would be invalid from build time
if it points to a relative path, and would be invalid after extracted
the sdk if it points to a absolute py. Dereference symlink when copy
will fix the problem.
Use tar rather than shutil.copytree() to copy is because:
1) shutil.copytree(symlinks=Fasle) has bugs when dereference symlinks:
https://bugs.python.org/issue21697
And Ubunutu 1404 doesn't upgrade python3 to fix the problem.
2) shutil.copytree(symlinks=False) raises errors when there is a invalid
symlink, and tar just prints a warning, tar is preferred here since
the real world is unpredicatable
3) tar is faster than shutil.copytree() as said by oe.path.copytree()
So use tar to copy.
(From OE-Core rev: f4d70bb0882eec4fb46cd942f2796fad57c72982)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YP#7202]: Test for linux-dummy
The new kernel.py file is intended for kernel related test cases.
The test for linux-dummy will ensure it is in good shape and can
be used as a kernel replacement at build time. To do this, the
test will first clean sstate for linux-dummy target, ensuring no
file is present in the stamps directory. After, core-image-minimal
is built, ensuring linux-dummy can be used as a kernel substitute.
(From OE-Core rev: 98c6ebf1e05158c689e01b785d32757847cdb10c)
Signed-off-by: Costin Constantin <costin.c.constantin@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Konsole has dropped support for the nofork flag. It has been replaced with the seperate flag.
(From OE-Core rev: f0b193b63d4c468c3aa58e15ef5a991e04b9b9a2)
Signed-off-by: Michael Davis <michael.davis@essvote.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the move to put image deployment under sstate control in
d54339d4b1a7e884de636f6325ca60409ebd95ff old images are automatically
removed before a new image is deployed (the default behaviour of the
sstate logic).
RM_OLD_IMAGE is therefore no longer required to provide this
behaviour, remove the variable and its users.
(From OE-Core rev: 93631befe8b962bf99524746b49f4ebca336175c)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a function (and test suite) to turn the ELF machine field (e_machine) into a
string, so we can tell the user "x86-64" instead of 0x3E.
(From OE-Core rev: 72336003741fb16a7ecdd6b753eae56310413ff7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Deal with an interrupted system call gracefully:
| File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-qa-systemd/build/meta/lib/oeqa/utils/sshcontrol.py", line 55, in _run
| if select.select([self.process.stdout], [], [], 5)[0] != []:
| InterruptedError: [Errno 4] Interrupted system call
(From OE-Core rev: 556125e4004fb7ac5169b59f51dc151f18c1806a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Test creation of sdimage-bootpart image
(From OE-Core rev: 8b18568591f66aa9770798bc61123898de92b8a9)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Test creation of systemd-bootdisk image.
(From OE-Core rev: b8eef88536b944ea35664b9a6a9496fb0a3f7988)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PACKAGE_EXCLUDE_COMPLEMENTARY variable can currently only contain
one regular expression. This makes it hard to add to it from different
configuration files and recipes.
Allowing it to contain multiple, whitespace separated regular
expressions should be backwards compatible as it is assumed that
whitespace is not used in package names and thus is not used in any
existing instances of the variable.
After this change, the following three examples should be equivalent:
PACKAGE_EXCLUDE_COMPLEMENTARY = "foo|bar"
PACKAGE_EXCLUDE_COMPLEMENTARY = "foo bar"
PACKAGE_EXCLUDE_COMPLEMENTARY = "foo"
PACKAGE_EXCLUDE_COMPLEMENTARY += "bar"
(From OE-Core rev: a5f7e98a94e96d40b1276c85249619aa8d7be847)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows a regular expression specified in
PACKAGE_EXCLUDE_COMPLEMENTARY to have a leading dash. Without this,
the dash was treated by oe-pkgdata-util as the beginning of a command
line argument. E.g., if PACKAGE_EXCLUDE_COMPLEMENTARY = "-foo$", it
resulted in an error like:
ERROR: <imagename>-1.0-r0 do_populate_sdk: Could not compute
complementary packages list. Command '<topdir>/scripts/oe-pkgdata-util -p
<builddir>/tmp/sysroots/<machine>/pkgdata glob
<workdir>/installed_pkgs.txt *-dev *-dbg -x -foo$' returned 2:
ERROR: argument -x/--exclude: expected one argument
usage: oe-pkgdata-util glob [-h] [-x EXCLUDE] pkglistfile glob [glob ...]
(From OE-Core rev: ac4ca41d3a27356d46c0c39053e74d3519b24c44)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change aligns disk usage measurements of the eSDK test with the old
build-perf-test.sh script. And thus, also makes the results between the
old and the new script comparable.
(From OE-Core rev: dadb84936b3672dcf07e5ab8226158136762801f)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The NUC6 firmware tells the kernel to try and initialize an embedded
DisplayPort it does not have, causing this warning. Its harmless, so
just whitelist it.
Fixes [YOCTO #9434].
(From OE-Core rev: 4c3fb7f63aad4a5d1b9720c76091cd0646859c2a)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following poky commit:
4359ef08 base.bbclass: Use bb.fatal() instead of raising FuncFailed
changed the way the fetcher error is reported.
Previous reporting:
...Function failed: Fetcher failure for URL:...
New reporting:
...Fetcher failure for URL:...
Updating how the check is done fixes the test error and accurately
confirms the tested scenario for test_invalid_recipe_src_uri.
[YOCTO #10370]
(From OE-Core rev: 197da17dc97cef87375ae9190c6d1495e1c615b9)
Signed-off-by: Benjamin Esquivel <benjamin.esquivel@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Switching between multilib configurations should not change allarch recipe
or nativesdk checksums. Add a new sstate test for this based on the standard
allarch test.
(From OE-Core rev: 660543601171f88c75fb4e90f34dac86037f3f23)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
StreamHandler was added due missing log information on the console in
oe-selftest with Qemu Runner
(From OE-Core rev: a4e2df151af781edbcb6b0e17b51b5ed226bf77f)
Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change only whitelists the timeout message in infinite
wait case in uvesafb driver.
With the latest timeout patch introducing infinite wait in
uvesafb driver, we whitelist the timeout message since it works
as a warning for issues related to timeout not to be fixed in
build servers.
We remove other errors for bug-discovering purposes in some cases
where these lines are still worthy to be caught (not whitelisted):
The removed errors show up again in the infinite wait case. It
indicates a different root cause or the timeout patch doesn't work
correctly.
Timeout happens when developers explicitly set a non-negative timeout
of a limited period to wait for task completion in uvesafb driver.
Timeout or/and errors occur when kernel doesn't have the latest
timeout patch in driver.
Note: The latest timeout patch is tracked by:
a2966330bc
[YOCTO #8245]
(From OE-Core rev: 2e15b478343c6703c37b9a45e61c9de200d98027)
Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we weren't testing the deb backaned for sstate correctness
and there was a bug that had crept in. Ensure we cover all package
backends with the test regardless of what the distro/conf sets.
(From OE-Core rev: cdaafc3729700778d95afc2413553d7b41c1317b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
galculator configure seems to be so old it does not
recognise --with-libtool-sysroot: regenerate configure.
Fixes [YOCTO #10191].
(From OE-Core rev: 3e838773462e77cb2e3ba9a69534260f89ca4904)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has always silently failed on hardware without AMD Northbridge,
and a recent kernel patch made it not silent. It would be ideal to only
whitelist the error for genericx86 MACHINEs and disable the CONFIG
option that enables it in intel-* MACHINEs, but in order to disable
this configuration option we would have to enable EXPERT and
DEBUG_KERNEL, which we don't want. Instead just whitelist it on all
x86 MACHINEs.
Fixes [YOCTO #10261].
(From OE-Core rev: 9c432dae1045a087f8eb2de7c9bd3a9cbd46c459)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When PATCHTOOL = "git", if we need to manually apply a patch and then
commit it (i.e. when git am doesn't work) we try to extract the author /
date / shortlog from the patch header. Make the following improvements
to that extraction process:
* If there's no explicit Subject: but the first line is followed by a
blank line, isn't an Upstream-Status: or Index: marker and isn't too
long, then assume it's good enough to be the shortlog. This avoids
having too many patches with "Upgrade to version x.y" as the shortlog
(since that is often when patches get added).
* Add --follow to the command we use to find the commit that added the
patch, so we mostly get the commit that added the patch rather than
getting stuck on upgrade commits that last moved/renamed the patch
* Populate the date from the commit that added the patch if we were able
to get the author but not the date from the patch (otherwise you get
today's date which is less useful).
(From OE-Core rev: 896cfb10ec166a677cbb3b4f8643719cabeb7663)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you leave "From <hash>" lines in the commit message it can actually
break git rebase because it tries to interpret the line in the context
of the current repository, and if the hash is invalid then a rebase
will blow up with:
fatal: git cat-file: could not get object info
or in newer git versions:
error: unable to find <hash>
fatal: git cat-file <hash>: bad file
(I hit this when I tried to do a devtool upgrade on openssl to 1.0.2i
the first time I did "git rebase --skip")
(From OE-Core rev: 19a6b18ac23cb2d7bb89203f774b2bee7f0cb03c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Selftests' cleanup method during test setup is not capable of
restoring local configuration files that remain modified after
aborting a test through a keyboard interruption.
This change creates backups for local.conf and bblayers.conf at
test setup, restore them when found, and deletes them at cleanup.
[YOCTO #9390]
(From OE-Core rev: 0877278e07e4c2494c4c23199490dc47a5cee69d)
Signed-off-by: Jose Lamego <jose.a.lamego@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test has a bitbake invocation that is expected to fail, so inhibit
report-error running.
(From OE-Core rev: b2771e17a5f301423f65be9f93c9c1b1e7f8ab93)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Based on a discussion with IRC user: Ulfalizer
It was suggested that removing the diagnostic list, and replacing it with a
simple hint to what might be causing the problem was a better solution.
(From OE-Core rev: ca78313665b23bd7fee85f034acfe1eb1009bd65)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the debug before the error (as it can take many pages.) This makes it
much easier for the user to see the actual error message as it is still on
the screen.
(From OE-Core rev: d643fb2a9cb5bd0d8b0105e9d44b989a49ffa963)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* validate_pn() is supposed to protect against invalid characters, fix
the function so that it actually does (unanchored regex strikes
again...)
* However, now that the function is enforcing the restrictions, we do
still want to allow + in recipe names (e.g. "gtk+")
(From OE-Core rev: c5d5a1baf98a11676537fb5e9f8ec4409e30c1fd)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously the following commit in oe-core move RPM metadata
from DEPLOY_DIR to WORKDIR.
-----------
commit a92c196449c516fe51786d429078bbb1213bb029
Author: Stephano Cetola <stephano.cetola@linux.intel.com>
Date: Wed Aug 10 13:03:16 2016 -0700
Allow for simultaneous do_rootfs tasks with rpm
Give each rootfs its own RPM channel to use. This puts the RPM metadata
in a private subdirectory of $WORKDIR, rather than living in DEPLOY_DIR
where other tasks may race with it.
-----------
In the modification of 'class RpmIndexer, it should not
directly set arch_dir with WORKDIR. It caused 'bitbake
package-index' could not work correctly.
Assign WORKDIR as input parameter at RpmIndexer initial time
could fix the issue.
(From OE-Core rev: 3c8c8501d0a19b566a94a9e06afe40642b444958)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "forever" package, despite its innocent description, actually drags
in a surprising number of dependencies and as a result the nodejs test
takes up to 10 minutes as a result. Pick a different example with a much
more reasonable set of dependencies.
Addresses part of [YOCTO #10254].
(From OE-Core rev: 638ee71da967f093071ba25e0ea5c467dab65339)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This logs the launch command that was used for runqemu while running -c
testimage. This way, if I'd like to easily launch qemu manually in
order to debug a failed test, I know what commmand was run to create
the qemu instance.
(From OE-Core rev: 34aa20c6f323bbf7ad53beb643126e4e03634708)
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To help debug failures, redirect stderr to stdout in oeSDKTest.run() and
oeSDKExtTest.run().
(From OE-Core rev: 4cd143e0de7f0082f60f273f442f6255f28ec3e7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to avoid race condition when test if exists the linkfile
use bb.utils.lock, the best solution is to create a unique name
for the link file.
There is no way to create a unique linkfile name at this decorator
because is needed the machine and image variables, those variables
can't be passed easily in this code.
To avoid broke test export functionality use a try/except because bb
isn't available when use test export
[YOCTO #10225]
(From OE-Core rev: 059d475b6bce1e5414170a4fe2e7989f6b0eacd6)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have a proper fix now so we can remove the workaround.
This reverts commit 4d268abc2fc892c5d34449f78c8e9f2b1a9d6bac.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Indirect paths (e.g. ${TOPDIR}/../meta-something) do generally work if
used in BBLAYERS in bblayers.conf. However, if you built an extensible
SDK with this configuration then the creation of the workspace within
the SDK using devtool in do_populate_sdk_ext failed. This is because
the copy_buildsystem code was no longer correctly recognising that the
core layer ("meta") was part of a repository (e.g. openembedded-core /
poky) that should be shipped together - because of the indirection - and
thus it was splitting out the meta directory, and a number of places in
the code assume that the meta directory is next to the scripts
directory. Use os.path.abspath() to flatten out any indirections.
(From OE-Core rev: 7c0788cd2390fd0e1ec84bc9dbebcb67daee429f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 79fe476be233015c1c90e9c3fb4572267b5551d1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When trying to re-test smart rpm tests. A fail arises
due to a linux user previously created upon the image.
We've added a few lines to delete such user and his home dir
when finishing test.
[YOCTO #9204]
(From OE-Core rev: d1a80ac434bb798634bbb792ff7df59148ec26be)
Signed-off-by: Edwin Plauchu <edwin.plauchu.camacho@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When processing buildstats we determine recipe name, epoch, version and
revision from the per-recipe buildstat directory name. One previous
patch made an assumption that package version starts with a number.
That might not be true because of a packaging mistake or whatever
reason. Thus, if a version starting with a number is not found, fall
back to the "old" method of just taking the second-last dash-delimited
part (the one before revision).
(From OE-Core rev: 936eb9aac055f1d4f41bb351477a0f5bebf76a0e)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you run:
MACHINE=A bitbake <image> -c testimage
MACHINE=B bitbake <image> -c testimage
and A has errors in parselogs, machine B can pick these up and cause
immense confusion. This is because the test transfers the log files
to cwd which is usually TOPDIR. This is clearly bad and this patch
uses a subdir of WORKDIR to ensure machines don't contaminate each
other.
Also ensure any previous logs are cleaned up from any existing
transfer directory.
(From OE-Core rev: ac8f1e58ca3a0945795087cad9443be3e3e6ead8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Yucku hack around test failures which ultimately are caused by a race in
smartpm itself. Issuing smartpm commands in quick succession causes
races in package cache of smartpm on some systems. This patch mitigates
the problem by sleeping for 1 second after each smartpm command that
modifies the system.
[YOCTO #10244]
(From OE-Core rev: 4d268abc2fc892c5d34449f78c8e9f2b1a9d6bac)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Full package feed indexes overload a 256MB image so reduce the number of rpms
the feed. Filter to p* since we use the psplash packages and this leaves some
allarch and machine arch packages too.
[YOCTO #8771]
(From OE-Core rev: f352c3b71cbf50846c7de31046202296b38713cc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than copying images, use the snapshot option to qemu. This fixes a regression
caused by the recent runqemu changes where the wrong images were being testes since
the image is copied without the qemuboot.conf file. This means the latest image is
found by runqemu rather than the specified one, leading to various confused testing
results.
It could be fixed by copying more files but use snapshot mode instead.
(From OE-Core rev: eab91997d415b0e690b3482749a32087e6a8b00a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no runqemu-internal any more.
(From OE-Core rev: 14bacf7203ab7a638b67eb143225d8c75bbb703d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu 2.7.0 introduces kernel errors:
[ 2.310768] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
[ 2.311338] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[ 2.311604] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[ 2.311835] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[ 2.312063] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
[ 2.312323] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
[ 2.314320] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100
[ 2.315363] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180
Whitelist this for now since this is preferable to the random failures
we're seeing from qemuppc with 2.6.0.
(From OE-Core rev: 4d542cdc86c34f0f4a3dde8b0aab059bca76a9fb)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's rare but there are recipes that have individual files (as opposed
to archives) in SRC_URI using subdir= to put them under the source tree,
the examples in OE-Core being bzip2 and openssl. This broke devtool
update-recipe (and devtool finish) because the file wasn't unpacked into
the oe-local-files directory and thus when it came time to update the
recipe, the file was assumed to have been deleted by the user and thus
the file was erroneously removed. Add logic to handle these properly so
that this doesn't happen.
(We still have another potential problem in that these files become part
of the initial commit from upstream, which could be confusing because
they didn't come from there - but that's a separate issue and not one
that is trivially solved.)
(From OE-Core rev: 9069fef5dad5a873c8a8f720f7bcbc7625556309)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When extracting patches from a git repository with PATCHTOOL = "git" we
cannot assume that all patches will be UTF-8 formatted, so as with other
places in this module, try latin-1 if utf-8 fails.
This fixes UnicodeDecodeError running devtool update-recipe or devtool
finish on the openssl recipe.
(From OE-Core rev: 579e4d54a212d04cfece2c9fc0635d7ac1644058)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Be sure to take the latest buildstats if multiple buildstats are found.
(From OE-Core rev: bad495f0d0144728a0132c3d3c4d98c24ead4afd)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Try to be more intelligent when splitting out recipe name, epoch,
version and revision from the buildstat directory name. Previous
assumption was that package versions never contain a dash but obviously
that is not necessarily true. The new assumption is that the package
version starts with a number.
(From OE-Core rev: 91d3fce1eb3e27d646afba8cf3c03ae560412d1d)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Always use two digits for (integer part of) seconds, i.e. show '1:02.34'
instead of '1:2.34'.
(From OE-Core rev: 55bb6816aca39bfa25d4f7e2158a57a5f0ac1cca)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a simple test to validate that the number of files in the
destination matches the number of files in the source after the
copyhardlinktree() has been performed.
(From OE-Core rev: ca5c718b309524e46818627f8b5c9260d009472d)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The change to preserve extended attributes in copytree() and
copyhardlinktree() (e591d69103a40ec4f76d1132a6039d9cb1555103)
resulted in an incorrect cp invocation in copyhardlinktree() when
the source directory contained hidden files.
This was because the passed src was modified in place but some code
paths expected it to remain unmodified from the passed value.
Resolve the issue by constructing a new source string, rather than
modifying the passed in string.
(From OE-Core rev: 2b9fdd8448c2c29418d1c3fca9fe1789466f09b4)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the update to the 4.8 kernel the versatile platform (and hence
qemuarm) has switched to a device tree boot.
We are using an ummodified mainline kernel versatilepb device tree,
which includes definitions of multiple amba devices. These devices
are not present in the qemu system emulation, hence throw warnings
during boot.
These warnings are not unique to oe-core, and rather than carry kernel
patches to the device tree (for now), we whitelist the known warnings
so qa testing will pass. We also can't turn amba off completely, since
it is providing valid devices (like the serial port) and AMBA is
force selected by other kconfig values.
We also have a jitterentropy warning that shows up on some hosts.
This warning is harmless, and like amba we can't turn it off in a
fragment since it is force selected by crypto (and we'd rather not
turn all crypto off). So we add it to the whitelist while investigations
continue into what is needed in the host to support this fully.
(From OE-Core rev: f5315b8c7998611da9984fd6bce2b48d6304ff6c)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed deployment directory from DEPLOY_DIR_IMAGE to
IMGDEPLOYDIR to make sstate machinery to do final deployment and
generate manifest.
Renamed variable deploy_dir to deploy_dir_image in selftest code
to avoid confusion with DEPLOYDIR variable.
Updated the code of rootfs.py:Rootfs class to use IMGDEPLOYDIR variable
as it's now used as a new deployment destination.
(From OE-Core rev: 6d969bacc718e21a5246d4da9bf9639dcae29b02)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using PATCHTOOL = "git", the user of the system is not really the
committer - it's the build system itself. Thus, specify "dummy" values
for username and email instead of using the user's configured values.
Various parts of the devtool code that need to make commits have also
been updated to use the same logic.
This allows PATCHTOOL = "git" and devtool to be used on systems where
git user.name / user.email has not been set (on versions of git where
it doesn't default a value under this circumstance).
If you want to return to the old behaviour where the externally
configured user name / email are used, set the following in your
local.conf:
PATCH_GIT_USER_NAME = ""
PATCH_GIT_USER_EMAIL = ""
Fixes [YOCTO #8703].
(From OE-Core rev: 765a9017eaf77ea3204fb10afb8181629680bd82)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-Core commit d3057cba0b01484712fcee3c52373c143608a436 fixed handling
of wildcard bbappends, which means that this test's expectations about
the bbappend file name are no longer met. devtool finish is meant to use
wildcard bbappends so fix the test accordingly.
(From OE-Core rev: 21603566e4a2e709dcb4a940b49d870c91c822be)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a test to ensure that oe.path.copytree() preserves extended
attributes on files.
(From OE-Core rev: 2b047b8e3218f95978e41fee13635bff9af03dd6)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pass appropriate options to tar invocations in copytree() and
copyhardlinktree() to ensure that any extended attributes on the files
are preserved during the copy.
We have to drop the use cpio in "Copy-pass" mode in copyhardlinktree()
because cpio doesn't support extended attributes on files. Instead we
revert back to using cp with different patterns depending on whether
or not the directory contains dot files.
(From OE-Core rev: e591d69103a40ec4f76d1132a6039d9cb1555103)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
One motivation for the use of cpio in oe.path.copytree() was to
ensure that files with spaces in their names were copied. Add a new
unittest module to test the OE module with a test case for copytree
with a spaces in a filename.
(From OE-Core rev: a408f8310d9426db4439cf8db0cf49f9bfe90b3b)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No need to do lsdir magic for finding buildstats when reading results.
(From OE-Core rev: 4502f0979bf2e8698bb196345b89b170641fd43f)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of archiving buildstats in raw text file format convert all
buildstats into one json-formatted file. Some redundant information,
i.e. 'Event:', 'utime:', 'stime:', 'cutime:' and 'cstime:' fields, are
dropped.
(From OE-Core rev: efcf74b194f2a40eb3e6359dd41386db3eb25287)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add data from /proc/<pid>/io to system resource measurements.
(From OE-Core rev: e69a46a77854fac1169a09e0c5b70fa4b972255a)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use Python standard library functionality instead of the time utility
for measuring elapsed (wall clock) time of commands. The time.* log
files are also ditched. However, the same detailed resource usage data,
previously found in time.* logs is now provided in results.json file.
This data is collected through the resource module of Python.
(From OE-Core rev: d5ad818dd501b18379aa3540bffa9b920d7c3bab)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change directory name from 'buildstats-<test_name>' to just
'buildstats'. However, this patch adds the possibility to label
buildstats directory name with a postfix which makes it possible to save
multiple buildstats per test, for example.
(From OE-Core rev: 8997556040b2e7bfcfa6a75d4d97eb2e32207217)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Store the output data of each test in an individual subdirectory instead
of storing everything in the root output directory.
(From OE-Core rev: 64ff34df96aa9a74dd4303f76ec711aa5e9d5030)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Archive buildstats in a directory like 'buildstats' instead of something
like 'buildstats/20160513120000'.
(From OE-Core rev: 95138cdc70bb7f9b7ab74e1d83305f009790dccc)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Automatically create a json.formatted file (results.json) in the results
directory that contains results from all tests.
(From OE-Core rev: 6df3263531a41805b2280bb999cb4a73f9f91eae)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This defaults to 'oe-core' but can be defined using the
OE_BUILDPERF_PRODUCT environment variable.
(From OE-Core rev: a22cc3e04001be5d11bd85dbdceb7088cae7c735)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now failed measurements correctly cause a test failure (recorded as an
error). There should be no need to continue the test if one step fails,
especially now that the tests don't depend on each other.
(From OE-Core rev: 446e32aadc775ca146d12173b1463f524d7fe6ef)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add test set-up functionality so that the individual tests do not depend
on each other. This should make sure that a failure in one test does not
affect the results of another test. The patch also makes it reasonable
to run only a subset of the tests by using the --run-tests option.
The increase in total execution time of the full suite - caused by the
additional set-up steps - is insignificant because normally no
additional tasks need to be run. The previous test has already done all
set-up work.
(From OE-Core rev: 69b3c63e32d09ea4a41b21daacdff6bf1fc447c1)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test status check done when writing globalres log was incorrect.
(From OE-Core rev: 3efbd49fd80d2b349a8fd44dbcd509168dbc1061)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current functionality allows for the removal of certain packages
based on the read-only image feature. This patch extends this
functionality by adding the FORCE_RO_REMOVE variable, which will
remove these packages regardless of any image features.
[ YOCTO #9491 ]
(From OE-Core rev: cfb869ffd4c37c3cc8e6b3eb732c1a7b7cfc3cb0)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Makes it possible to create easily sortable tags. Also, the default tag
format is updated to use the new keyword.
(From OE-Core rev: e3161654d75dfc3b059c519205b38b26e3ffb215)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This number represents the number of commits since the beginning of git
history until the tested revision. This helps e.g. in ordering results.
(From OE-Core rev: b52070dd057ff5b410cd193f9be2f25bc4c506cc)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes it possible to create numbered tags, where the "basename" of
the tag is the same and the only difference is an (automatically)
increasing index number. This is useful if you do multiple test runs on
the same commit. For example, using:
--commit-results-tag {tester_host}/{git_commit}/{tag_num}
would give you tags something like:
myhost/decb3119dffd3fd38b800bebc1e510f9217a152e/0
myhost/decb3119dffd3fd38b800bebc1e510f9217a152e/1
...
The default tag format is updated to use this new keyword in order to
prevent unintentional tag name clashes.
(From OE-Core rev: cf2aba16338a147f81802f48d2e24a96c7133548)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a Git tag when committing results to a Git repository. This patch
also implements --commit-results-tag command line option for controlling
the tag name. The value
is a format string where the following fields may be used:
- {git_branch} - target branch being tested
- {git_commit} - target commit being tested
- {tester_host} - hostname of the tester machine
Tagging can be disabled by giving an empty string to
--commit-results-tag. The option has no effect if --commit-results is
not defined.
(From OE-Core rev: 60059ff5b81d6ba9ba344161d51d1290559ac2df)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new command line option for defining the branch where results are
commited. The value is actually a format string accepting two field
names:
- {git_branch} expands to the name of the target branch being tested
- {tester_host} expands to the hostname of the tester machine
The option has no effect if --commit-results is not used.
(From OE-Core rev: b54b63395ec632748a57a702812c8a9a07af35ab)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implement a new command line option '--commit-results' which commits the
test results data into a Git repository. The given path must be an
existing initialized local Git repository.
(From OE-Core rev: b6f635513ca971402e7a970acc2168fb5d4a9476)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is basically a internal change, at this point. Term 'commit' better
represents the data we actually have. Term 'revision' is more vague and
could be understood to point to a tag object, for example.
(From OE-Core rev: f49cf7959b8aaa52b79b22a5884c6aa580a50302)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new 'is_topdir' argument to the GitRepo init method which
validates that the given path is the top directory of a Git repository.
Without this argument GitRepo also accepts subdirectories of a Git
repository (in which case GitRepo will point to the parent directory
that is the top directory of this repository) which may have undesired
in some cases.
(From OE-Core rev: 044c81bd916fbe7140d184eb103f74786cfef604)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extend GitRepo.run_cmd so that the caller may redefine and/or define
additional environment variables that will be used when the git command
is run.
(From OE-Core rev: 9b3c7c47f5d0fa473fe1db81b59b26531414781c)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test works fine with su, which is more likely to be installed in images
than sudo.
(From OE-Core rev: 59d10be745a1f7d31c68e4d5da9e1c3461b7d390)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're periodically seeing uvesafb timeouts on the autobuilder. Whitelist these
errors as there is little it seems we can do about them and we therefore
choose to ignore them rather than fail the builds.
[YOCTO #8245]
There is a better solution proposed in the bug with a -1 timeout however
this avoids failed builds until such times as that is implemented.
(From OE-Core rev: 8097f2da79b7862733494d2321e3dfdb0880804d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LICENSE should be a superset of all LICENSE_<pkg> values. That is,
LICENSE should contain all licenses and LICENSE_<pkg> can be used to
"filter" this on a per-package basis. LICENSE_<pkg> shouldn't contain
anything that isn't specified in LICENSE.
This patch implements simple checking of LICENSE_<pkg> values. It does
do not do advanced parsing/matching of license expressions, but,
checks that all licenses mentioned in LICENSE_<pkg> are also specified in
LICENSE. A warning is printed if problems are found.
(From OE-Core rev: 0f4163a12ea431d0ba6265880ee1e557333d3211)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've had some upstream mirror instability so use our own mirror for the
iptables sources to ensure this doesn't affect the test results.
(From OE-Core rev: 25f6af8895d5f5c6dcedde0a21285d63522769c8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a bug that was introduced when converting to unittest framework.
(From OE-Core rev: 3bdb7b2e512b2f160360e95ed5b2be3871ec0b4b)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Unfortunately to implenent multiconfig support in bitbake some APIs
had to change. This updates code in OE to match the changes in bitbake.
Its mostly periperhal changes around devtool/recipetool
[Will need a bitbake version requirement bump which I'll make when merging]
(From OE-Core rev: 041212fa37bb83acac5ce4ceb9b7b77ad172c5c3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This error has occurred on the MinnowBoard Max and Turbot since its
inception. It supposedly indicates a non-working SD card reader, but
ours works fine. Whitelist the error.
(From OE-Core rev: d577028a1d756b70da056dee73df657cf8000baf)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These errors have been occuring since the introduction of the 4.4
kernel with no apparent functionality loss. Whitelist for now.
(From OE-Core rev: 47b9058994f15507fc18ce0b08ac82a4c052966e)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These errors can't be fixed without adding the firmware to the initramfs
and building it into the kernel, which we don't want to do for
genericx86-64. Since graphics still work acceptably without the firmware
blobs, just ignore the errors for that MACHINE.
(From OE-Core rev: d73a26a71b2b16be06cd9a80a6ba42ffae8412c4)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using kvm can provide significant speedups when running qemux86* machines
on an x86* host. Enabled by using the new QEMU_USE_KVM variable.
[YOCTO #9298]
(From OE-Core rev: ebac2c8d1fcd09ebce0659a4abb445e4f1c18571)
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop the self-baked force_rm() method.
(From OE-Core rev: c86bf80abd87acb0da5860806822c64ec9dee089)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Log failures of commands whose output is stored.
(From OE-Core rev: 240f6e7366c8a9ea830e531d307dd2e27a61a6bd)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Special runCmd() for build perf tests which doesn't raise an
AssertionError when the command fails. This causes command failures to
be detected as test errors instead of test failures. This way "failed"
state of tests is reserved for future making it possible to set e.g.
thresholds for certain measurement results.
(From OE-Core rev: 09590ac76a19ee1b1b4a9188f7fce5029f0de52a)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit converts the actual tests to be compatible with the new
Python unittest based framework.
(From OE-Core rev: 4e81967131863df7ee6c8356cb41be51f1b8c260)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new class is derived from unittest.TextTestResult class. It is
actually implemented by modifying the old BuildPerfTestRunner class
which, in turn, is replaced by a totally new simple implementation
derived from unittest.TestRunner.
(From OE-Core rev: 89eb37ef1ef8d5deb87fd55c9ea7b2cfa2681b07)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename BuildPerfTest to BuildPerfTestCase and convert it to be derived
from TestCase class from the unittest framework of the Python standard
library. This doesn't work with our existing testcases or test runner
class and these need to be modified, too.
(From OE-Core rev: b0b434210a3dbd576f68344e29b8c20d18561099)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add logic for the cases when the time retrieved does
not have decimal part.
(From OE-Core rev: a6c9e515f8bc590612e3082ab1c4c254711c8e3b)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Another instance where expected failures need to be not reported to the error
reporting service.
(From OE-Core rev: bb1cbb8d5bd7639554edcddf1d2eac4abdbb48c7)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When an image uses systemd journald acts as a main syslog daemon using
/dev/log.
The test_syslog_logger try to log a predifined message into the syslog
using logger and then search using grep in /var/log/messages if this
fails for some reason (file rotated) now search the predifined message
into the journal.
(From OE-Core rev: 26d7e5060a35d20df6f2586b70ed8d2853cc0186)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we don't have uninative enabled there's more merging to be done in
the default configuration (SDK_EXT_TYPE = "full" which by default means
SDK_INCLUDE_TOOLCHAIN = "1") and there are likely files that already
exist in the sstate feed we're assembling, so we need to take care to
merge the directory contents rather than just moving the directories
over. Additionally we now only run this if uninative genuinely isn't
enabled (i.e. NATIVELSBSTRING is different to the fixed value of
"universal".)
In the process of fixing this I discovered an unusual behaviour in
os.rename() - when we're merging these feeds we're dealing with
hard-linked sstate artifacts, and whilst os.rename() is supposed to
silently overwrite an existing destination (permissions allowing), if
you have the source and destination as hardlinks to the same file then
the os.rename() call will just silently fail. As a result the code now
just checks if the destination exists and deletes the source if so
(since we know it will be the same file, we don't need to check in this
case.)
(From OE-Core rev: 2b5b920c6b4f4d5c243192aa75beff402fd704d3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, we get to know the command failed and the exit code but
have no idea how the command failed since we don't get the output by
default.
This makes it much easier to see what went wrong and stand a chance of
fixing it.
(From OE-Core rev: b020b01d41ccaae5d679f1f7950af2e1a1788d39)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Give each rootfs its own RPM channel to use. This puts the RPM metadata
in a private subdirectory of $WORKDIR, rather than living in DEPLOY_DIR
where other tasks may race with it.
This allows us to reduce the time that the rpm.lock is held to only the
time needed to hardlink the RPMs, allowing the majority of the rootfs
operation to run in parallel.
Also, this fixes the smart tests by generating an index for all packages
at the time of the test, rather than using the one provided by the
rootfs process.
Original credit for the enhancement should go to Steven Walter
stevenrwalter@gmail.com.
(From OE-Core rev: a92c196449c516fe51786d429078bbb1213bb029)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now Runner's support extra_bootargs for the kernel so add
extra_bootparams to the start() methods to avoid exception.
(From OE-Core rev: 4c28c03a2322fbcb9a5c268b08eaeb71d940ee04)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Monitoring the process started by gnome-terminal was
spinning in a busy-loop. Insert some sleeping so that
we don't eat all the cpu.
(From OE-Core rev: 314937429d700204f296cfd1c0c5f215a2e5b939)
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some invocations of bitbake are expected to fail, so we don't want to report the
errors to errors.yoctoproject.org. Also rewrite the messages in
test_invalid_patch so they reflect reality.
[ YOCTO #10052 ]
(From OE-Core rev: 51f74a0d1ce4de9d311becee8e7d7cc7cd703d45)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently when copying a symlink to the target it will fail
throwing an exception. This will recreate symlinks from the
system performing the tests to the device under tests.
[YOCTO #9932]
(From OE-Core rev: 5705b7a55bc300e14c34b0530f4d49df101edd3c)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently packages that contains symlinks can't be extracted
and exported. This allows to export extracted such packages.
A nice side effect is improved readability.
[YOCTO #9932]
(From OE-Core rev: 0338f66c0d246c3b8d94ac68d60fbc4c314e500b)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using "auto" in TEST_SUITES there is a check
for __init__.py in the <layer>/lib/oeqa/runtime/
directory in all the layers in BBLAYERS.
This check was needed because the way that python 2
import the modules, now that bitbake uses python 3
there is no need these __init__.py files, moreover
these files won't allow to import tests from other
layers.
This patch removes the check.
[YOCTO #9996]
(From OE-Core rev: f1cc272e4851fd994e9d052628a747ac19f90488)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows to use a command line argument to change the
tag used to filter test instead of rebuilding the tests.
[YOCTO #8532]
(From OE-Core rev: 928e0eecdb126f7d0bacd05b7057fc825e0d8f05)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds test_testexport_sdk() to test the SDK feature
of testexport in the CI in order to avoid breaking it.
[YOCTO #9765]
(From OE-Core rev: badec3d10fcdd2d000450ab533caadcff1df5e13)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When run a command sometimes the output isn't provided so validate
before trying to encode to utf-8, also some output like BIOS/EFI
contains characters that can't be codified into utf-8 for this reason
set errors='replace'.
[YOCTO #10019]
(From OE-Core rev: f2a04faf3c5d0a3cc562061b22e1c4873e1ca769)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Busybox logread uses shmmem circular buffer to retrive [1] syslog messages
when systemd is enabled this shmem circular buffer isn't enabled because
systemd journald doesn't provide it.
[1] https://git.busybox.net/busybox/tree/sysklogd/logread.c?id=accd9eeb719916da974584b33b1aeced5f3bb346#n121
(From OE-Core rev: f49e4847ba00cdd072e5f072cb9ca69ef98af758)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of make all the testing in a shell one liner, divide the
test into 3 operations to be able to know in what part is failing.
Parts,
- Log message to syslog
- Review if message exist in /var/log/messages
- Review if message exist using logread
(From OE-Core rev: f3fe3590e887ee311f23723103eca41dcf58aa8b)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some features in testimage/testexport that are not tested;
this might lead to break some of these features without notice.
This adds a new test in order to test two features of testimage:
- Import test from other layers.
- Install/Unistall in the DUT without a package manager.
[YOCTO #9764]
[YOCTO #9766]
(From OE-Core rev: cffab2257dacfa741c64611dfdf361f77aff9460)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add three tests to verify that the git URL mangling is working the way
it's supposed to. This should prevent us regressing on this again in
future.
(From OE-Core rev: d8d01f462ddbb79cff23b544fcd0ce251f05f8ce)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you supplied an empty file to patch_recipe() (or an empty list to
patch_recipe_lines()) then the result was IndexError because the code
checking to see if it needed to add an extra line of padding didn't
check to see if there were in fact any lines before trying to access the
last line.
Fixes [YOCTO #9972].
(From OE-Core rev: 92a73e870478ddb2a2d137e3fff28828809bec2e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the new oe-check-sstate to filter the sstate artifacts shipped with
the extensible SDK by effectively running bitbake within the produced
eSDK and and getting it to tell us which tasks it will restore from
sstate. This has several benefits:
1) We drop the *-initial artifacts from the minimal + toolchain eSDK.
This still leaves us with a reasonably large SDK for this
configuration, however it does pave the way for future reductions
since we are actually filtering by what will be expected to be there
on install rather than hoping that whatever cuts we make will match.
2) We verify bitbake's basic operation within the eSDK, i.e. that
we haven't messed up the configuration
3) We verify that the sstate artifacts we expect to be present are
present (at least in the sstate cache for the build producing the
eSDK). Outside deletion of sstate artifacts has been a problem up to
now, and this should at least catch that earlier i.e. during the
build rather than when someone tries to install the eSDK.
This does add a couple of minutes to the do_populate_sdk_ext time, but
it seems like the most appropriate way to handle this.
Should mostly address [YOCTO #9083] and [YOCTO #9626].
(From OE-Core rev: 4b7b48fcb9b39fccf8222650c2608325df2a4507)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're to completely replace the standard SDK with the extensible SDK,
we need to be able to provide the standard toolchain on install without
doing anything other than installing it, so that you can install the SDK
and then point your IDE at it. This is particularly applicable to the
minimal SDK which normally installs nothing by default.
NOTE: enabling this option currently adds ~280MB to the size of the
minimal eSDK installer. If we need to reduce this further we would have
to look at adjusting the dependencies and/or the sstate_depvalid()
function in sstate.bbclass which eliminates dependencies, or look at
reducing the size of the artifacts themselves.
Implements [YOCTO #9751].
(From OE-Core rev: ed0d8ed72370df694f720cc13897493478dc1de9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of using a directory in the layer as the GPG home and carefully deleting
the right files from it, use tempfile to create a temporary directory which will
be cleaned up for us.
Also change the public/secret key variables to be absolute paths as they're
always used as absolute paths.
(From OE-Core rev: d4a5b5d11c6d7d5aba5f2eb88db091c1b98ef87c)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
tar's --no-recursion flag only applies to files mentioned after the
flag, which made it a no-op in this invocation of tar, because it was at
the end of the command line.
This is simple to verify with GNU tar 1.29:
| $ mkdir foo
| $ mkdir foo/dir
| $ touch foo/dir/file
| $ tar -cf - foo --no-recursion | tar t
| foo/
| foo/dir/
| foo/dir/file
| $ tar -cf - --no-recursion foo | tar t
| foo/
Modify the code so that it actually does what the comment says by moving
the flag in front of the --files-from argument.
(From OE-Core rev: d45f5e71fef5ffbd4408f69c5c179dc71a3eb452)
Signed-off-by: Clemens Lang <clemens.lang@bmw-carit.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe.utils.getstatusoutput() is a wrapper for subprocess.getstatusoutput() which
uses Universal Newlines, so the output is a str() not bytes().
(From OE-Core rev: ce24d4c3632b71939ad198268a900ee823a89b27)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When checking if a link exists before creating it, use os.path.lexists() as
otherwise os.path.exists() on a broken link will return False.
(From OE-Core rev: ec24b6de2b8686e1f779fef3a963e66f70eeba74)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is possible in an attempt only install, that everything listed is not
available to be installed. This will have the effect of clearing the
package list. However, we only check for an empty package list at
the beginning of the function. We need to also check before running the
install, otherwise we can fail due to 'error: no package(s) given".
(From OE-Core rev: 9ae6a2830dacb3c335754a6da91bd5cc30546b31)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using PR service the buildhistory-diff output contains a lot of
PKGR changes: In practice the mass of PKGR updates hide other important
changes as they often account for 80% of all changes.
Skipped incremental and decremental changes of PKGR versions to reduce
amount of the script output. All changes are still included in the
output if script is run with -a/--report-all command line option.
[YOCTO #9755]
(From OE-Core rev: a343788b11f6c4f92ae8d2035fe8cb54f922227e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new test target is neede to test Systemd-boot similar
to gummiboot. Created a copy of GummibootTarget class
and named as SystemdbootTarget, at this point the
gummibootTarget will remain until documentation is
updated with new systed information.
(From OE-Core rev: d1fd3a7dbc363bdc02d810f796b3b810cb13f029)
Signed-off-by: Jose Perez Carranza <jose.perez.carranza@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allow to have more than one test to have json file in order
to install packages in the DUT without using a package manager.
[YOCTO #9926]
(From OE-Core rev: 129c2b4589710aa24e23108f2728f1625b72cb06)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
updateEnv() can be used in other places so move the
function to utils/commands.py
(From OE-Core rev: 380e5d80898cac4ffc9715b3f597d0b62a0643ff)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This task runs all functions in IMAGE_QA_COMMANDS after the image
construction has completed in order to validate the resulting image.
Image sanity checks should either be Python functions which raise
bb.build.FuncFailed on failure or shell functions with return a
non-zero exit code.
Python functions may instead raise an oe.utils.ImageQAFailed
Exception which takes an extra argument, a description of the
failure.
python image_check_python_ok () {
if True:
raise bb.build.FuncFailed('This check always fails')
else:
bb.note("Nothing to see here")
}
image_check_shell_ok () {
if true
exit 1
else
exit 0
fi
}
[YOCTO #9448]
(From OE-Core rev: c9bef2ecf1a30159d11781184829f41844a58c13)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xsettings-client is not meant to be a shared library and the only
user in oe-core (libmatchbox) now has an in-tree copy.
(From OE-Core rev: ed5cbf977dca8f3d85c8d933071c6e49fb4bd95f)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bmap-tools-native is required to generate .bmap file. Without it
wic fails with this error when run with --bmap option:
Error: A native program bmaptool required to build
the image was not found
Added bmap-tools-native to the list of requirements to build
in Wic.setUpLocal method.
(From OE-Core rev: dd11ab551f9bf1d8761d0430f19510a9caa53a12)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a subcommand which will "finish" the work on a recipe. This is
effectively the same as update-recipe followed by reset, except that the
destination layer is required and it will do the right thing depending
on the situation - if the recipe file itself is in the workspace (e.g.
as a result of devtool add), the recipe file and any associated files
will be moved to the destination layer; or if the destination layer is
the one containing the original recipe, the recipe will be overwritten;
otherwise a bbappend will be created to apply the changes. In all cases
the layer path can be loosely specified - it could be a layer name, or
a partial path into a recipe. In the case of upgrades, devtool finish
will also take care of deleting the old recipe.
This avoids the user having to figure out the correct actions when
they're done - they just do "devtool finish recipename layername" and
it saves their work and then removes the recipe from the workspace.
Addresses [YOCTO #8594].
(From OE-Core rev: fa550fcb9333d59b28fc0e4aebde888831410f5c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This provides us with the information we need to remove the original
version recipe and associated files when running "devtool finish" after
"devtool upgrade".
(From OE-Core rev: 92eb42c347af919cd9f8739515fdf806c12b5ba8)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Allow the function to be called with the base layer path (in which
case it will just return the same path)
* Ensure that the function doesn't recurse indefinitely if it's called
on a file that's not inside a layer
* Correct the doc comment for accuracy
(From OE-Core rev: 912026d85c2f535be2f60c45979162ea25c7f356)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
During a parallel build it's possible for unrelated shlib files to be removed if
the recipe they came from is about to be rebuilt. They can't be involved in the
dependency chains as otherwise they wouldn't be removed, so just silently handle
files disappearing.
[ YOCTO #8555 ]
(From OE-Core rev: 1e355da3fda742c78d99ddd2ee5caa9df52f92e1)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add ability to specify extra_bootargs (kernel cmdline) in order to enable systemd
debug log in images that enables systemd init.
[YOCTO #9299]
(From OE-Core rev: 09d62551c289b5607341a4f9c46eecd6390ad774)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This application needs GTK+ 2 which we're trying to move away from for Sato
images.
(From OE-Core rev: 5e52f208a17e7122209675fa96de6e7807c62feb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With Python 3, the encoding of a file is significant; several recipes in
OE-Core have patches which are not fully utf-8 decodable e.g. man,
lrzsz, and gstreamer1.0-libav, leading to errors when using devtool's
modify, upgrade or extract subcommands on these recipes. To work around
this, try reading the patch file as utf-8 first and if that fails try
latin-1 before giving up.
(From OE-Core rev: 7f4d7a6f51569954e204f110827a8ce256bcdc68)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
removing this test since we move directfb out of oe-core
(From OE-Core rev: 2d8fda36ecfa1945f22b7139a2febd12ec59272b)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the new pid monitoring code we have for recent versions of
gnome-terminal we can just drop the --disable-factory code now since
the other solution handles this case as well.
(From OE-Core rev: ed4957c444a2982c19e2f1f96d9afb2a992c1daf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently gnome-terminal just returns straight away, opening a terminal in a new
separate process we have no insight into. For patch resolution, this leads to
spawning many different terminal windows, for pydevshell, it just flashes a window
up and then closes.
We need to block until the command completes but gnome-terminal gives us no way
to do this. We therefore write the pid to a file using a "phonehome" wrapper
script, then monitor the pid until it exits.
[YOCTO #7254]
(also fixing do_devpyshell)
(From OE-Core rev: 76e8ab47c936674b8bb9bf1c48de53b30f5bf74a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test refers to a function that no longer exists after the eSDK
install double execution of bitbake has been removed, and since
test_prepare_unexpected is the only test in this module, drop the
entire module. We can easily resurrect it if we have unit tests to add
in the future.
(From OE-Core rev: 7e792a22e62904ed2dafb1ea214911235e3f3efc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The progress patches change the output slightly, update the test to
deal with this.
(From OE-Core rev: 90dbd838fa97c89ace5cb147aa5cff39b94178b1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a copy-and-paste of subprocess.check_output() from when we supported
Python <2.7, so simply delete it and use subprocess.check_output() instead.
(From OE-Core rev: b1f2d9ed8d4dc89c9e669f43f546463ccc2a76b9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we're building the extensible SDK we don't need to see the "Writing
locked sigs" message; it's only necessary when the user explicitly runs
bitbake -S none <target>.
(From OE-Core rev: 440a351ee13920045c9d3e51882908f7b3f01d35)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the new task progress functionality to report progress during
do_rootfs. This is a little coarse and ideally we would have some
progress within the installation section, but it's better than
nothing.
(From OE-Core rev: 370f08d434480c1790950e40db8f7687da78cb14)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a GTK+3 application, so we don't need to ship GTK+ 2 in Sato just for
the SDK test suite.
[ YOCTO #9780 ]
(From OE-Core rev: 53fcfe4348a2ca727844f2b0bd3fca2902cbdda0)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test test_syslog_help doesn't exist, so skipping unless it passed just
produced a warning.
(From OE-Core rev: 9856fe02bf30cd9e834a7d324e357070f4d7735f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using this option the script appends test results into a 'global results
file'. A CSV-formatted output of the results. This option is to provide
compatibility with the old build-perf-test.sh.
(From OE-Core rev: e9f18e63220e452f2b0c878998e57d944ae83980)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BuildPerfTestRunner determines these from the Git repository under which
it is being run (i.e. where the build directory exists). The branch and
revision may be defined/overridden with OE_BUILDPERFTEST_GIT_BRANCH
and OE_BUILDPERFTEST_GIT_BRANCH environment variables, if needed. This
makes it possible to run the build performance test script even if the
top directory is not a git repository clone, for example.
(From OE-Core rev: e6004582454d8c6a18f617c12e6e408ded5be8df)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new helper module for easier interaction with Git repositories.
Provides GitRepo class that represents one local Git repository clone.
The GitRepo class currently only has one method, run_cmd(), for running
arbitrary git commands in the repository. More specialized methods for
commonly used git operations can be added later.
(From OE-Core rev: 4eaf434f885afbda03fe67ab6e9ff291c7a9c77e)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Have the build/conf directory as part of test results.
(From OE-Core rev: ea32a8a65f668450e0ec0e80483bd5e8c91b8a18)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-implement "test4" from build-perf-test.sh which measures eSDK metrics.
(From OE-Core rev: c449ca1b062426380a0572aed2da4ee4a83281f5)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-implement "test3" from build-perf-test.sh which measures
bitbake parsing time.
(From OE-Core rev: 388c7160b90247df9c78d8803083821402c13af5)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-implement "test1_p3" from build-perf-test.sh which measures
'bitbake core-image-sato' with rm_work enabled.
(From OE-Core rev: bfe48d343e8a281760da0b6744c08d47039f93e0)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-implement "test1_p2" from build-perf-test.sh which measures
'bitbake virtual/kernel'.
(From OE-Core rev: 5ff82c6e2b0ff41a9bfdd49c99e84a982cf6e467)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-implement "test1_p1" from build-perf-test.sh which measures
'bitbake core-image-sato'.
(From OE-Core rev: 1ddd4a8ce4e2053def0e946d4e4b4b97bdc28e61)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new class is responsible for actually running the tests and
processing their results. This commit also adds a decorator function for
adding new tests. No automatic test discovery, at least yet.
(From OE-Core rev: bf90aecb7e150d6bfac7240286c797b79d26528b)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new method to BuildPerfTest class for measuring the disk usage of
a file of directory.
(From OE-Core rev: 85cdc240e75d481e93238fbf75f8b8431da05f19)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add new methods to BuildPerfTest class for running a shell
command and logging its output.
(From OE-Core rev: 8f0b11ba1266f9c650cf34d9b394d72009ee7207)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extend BuildPerfTest class with a new method for measuring the system
resource usage of a shell command to BuildPerfTest class. For now,
easurement of the elapsed time is done with the Gnu time utility,
similarly to the build-perf-test.sh shell script. And, it currently only
records the elapsed (wall clock).
The measured values (currently, only the elapsed time) is actually a
dictionary, making it possible to extend it with additional resource
values, e.g. cpu time or i/o usage, in the future. In addition to the
actual values of the measurement each record contains a 'name' and
'legend' where name is supposed to function as a common key or id over
test runs, making comparison and trending easier, for example. Legend is
supposed to be a short human readable description.
(From OE-Core rev: ced156bfea4a6649d201f41275641a633f218322)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new class will be used as an abstract base class for build
performance tests. This implementation contains some common
functionality used in multiple tests, "copied" from the
build-perf-test.sh shell script.
(From OE-Core rev: 35cd7363759a286e80ddca0d028db3d2bf524b17)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new utility class for dropping Linux kernel caches. It uses sudo
and tee to write to the drop_caches file. Checking if the user has the
permissions to drop caches (without a password) is done by trying to
writing an invalid value to the drop_caches file. This way, we will find
if writing (with tee) is possible but not really dropping caches, yet.
User can avoid giving the password by adding something like:
<user> ALL = NOPASSWD: /usr/bin/tee /proc/sys/vm/drop_caches
to the system sudoers file.
(From OE-Core rev: c9cb248429ced50c96d11ba5361c272d4c9b9323)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wireframe of a new Python module for containing build performance tests
and utility functions.
(From OE-Core rev: b44af9051a9da8d2cddc7b071a896331967f15cc)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Useful if one wants to separate stdout and stderr.
(From OE-Core rev: de9744c91a997a5ab0e7a19dbe13d8def8d62800)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Get rid of duplicate code.
(From OE-Core rev: cdd6b7386afd460337705d8117a4328d4993ecef)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new function for getting values of multiple bitbake variables at the
same time.
(From OE-Core rev: fe3039322e2f846b336ac5af5177e9da27d79695)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In RpmPM:insert_feeds_uris, the paths are kept in sets, which are unordered,
but they are later used to set the priority for the Smart channels, so
unexpected results could occur. Change the sets to lists and use the same
code as in create_configs() to add items to the list, rather than the set
operators.
[YOCTO #9717]
(From OE-Core rev: ce4137f4bb955207fede0c4ef338835d9a461f59)
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some upstreams need more than just gnu-configize ran before ./configure works,
such as ./autogen.sh or autoreconf. Add extra_args (defaulting to
gnu-configize) so that this can be done in test cases.
(From OE-Core rev: 7096f2889f1623ce97a6696f6f4c7217f0efb972)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The re.sub() used to transform a tarball into a best guess folder name wasn't
right, as there isn't enough escaping and tar.xz was missing.
(From OE-Core rev: ac99135b009a1066486ed2afb2f298d0a5a3a854)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Specify tmpdir for opkg via '-t' option so that opkg does not use
the default 'TMPDIR' which usually is '/tmp' on build host.
This would solve race problems like below.
sh: /tmp/opkg-rOG6Tl/opkg-intercept-iPoEp5/depmod: Permission denied
(From OE-Core rev: 5665e284b7e7ee071201664dc50a3412bd4ac8cd)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
hasPackage() was looking for the string provided as an RE substring in the
manifest, which resulted in a large number of false positives (i.e. libgtkfoo
would match "gtk+").
Rewrite the manifest loader to parse the files into a proper data structure,
change hasPackage to do full string matches, and add hasPackageMatch which does
RE substring matches.
(From OE-Core rev: b9409863af71899e02275439949e3f4cdfaf2d0f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Order is not preserved in dict() and this code depends on the order of
these lists of package architectures used when multilibs are enabled.
This caused 'random' breakage where sometimes the correct order was present
and sometimes it wasn't.
Use collections.OrderedDict() to avoid this problem.
Kudos to Bill Randle and Alejandro Hernandez who did most of the work debugging
this, I simply took the problem they identified and wrote a patch to fix it.
This unblocks the M1 build but this code needs auditing as there are clearly
other ordering issues (e.g. the set() usage).
[YOCTO #9717]
(From OE-Core rev: 61a33582dfc964d612d20d34734a787d873e312c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
create_socket: Use urllib because urllib2 is now urllib in python3
and proxies as argument are deprecated so export them in the environ
instead.
get_links_from_url: Change usage of sgmllib for parsing HTML because
is deprecated in python 3, use instead bs4 that is already imported
in the bitbake tree.
[YOCTO #9744]
(From OE-Core rev: ee26ecf58277560459dd01992bb3f486f92c1531)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On python 3, bytes variable types must be decoded if these are intended to be
used as strings, otherwise we get the following error exception:
TypeError: Type str doesn't support the buffer API
(From OE-Core rev: b950539c911b7945d652b05616164828e711ac7f)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Exported tests is not been tested right now and it get
broken very easily with import errors from bitbake.
This adds a new test in order to verify in the CI if
the testexport gets broken.
[YOCTO #8384]
(From OE-Core rev: b6e0a762f8a17ee323cef02934f9a624faf706ed)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support to export the SDK tarball needed when a test
system doesn't have the required software to perform runtime
tests.
The support is when exporting the test and when running
the test on a remote system. The user of this feature just
need to set TEST_EXPORT_SDK_ENABLED to "1" and declare
the sdk packages in TEST_EXPORT_SDK_PACKAGES.
[YOCTO #7850]
(From OE-Core rev: a6041f81b81baa7564e4c712fc88de2b997e52e4)
(From OE-Core rev: 05e6c89f0f71311f8bd32cdb86a2deb789c58035)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the functionality to install/unistall packages in the
DUTs without the use of the package manager. This is possible
with the extraction introduced in package manager class.
testimage and testexport bbclasses has been modified in order
to support this new feature.
[YOCTO #8694]
(From OE-Core rev: b7111d9e9d64d21f57729d1ac1865aea6e54cc8b)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In python3 the functionality to import modules has been changed and
this broke the capability to add runtime tests from other layers.
This commit returns this capability to testimage and testexport.
[YOCTO #9705]
(From OE-Core rev: a26f23d3ce8f7e9f59dbc9bf27516377fd7a0a6d)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds decoding needed by some commands output later used as
strings.
[YOCTO #9702]
(From OE-Core rev: 0440b5ace411c61f802376d4e1c9eac93e72d65f)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
string.rstrip() doesn't exist in Python 3, so use the .rstrip method on the
object itself instead.
(From OE-Core rev: 554719e3f65e468f89a96d4869766d3ff7a8012e)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The read method of the data_stream File object now returns bytes,
not a str, so we must decode it.
(From OE-Core rev: cfae302c4996c49a8754497ea9f13f8331d6975d)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove deprecated attributes in order to use python3.
runexported was changed to use python3.
[YOCTO #9702]
(From OE-Core rev: 9129af6dc421455c0253be313bf5781b913dc5fd)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We are observing cases (see below) where the 'WARNING:' prefix is not at the
beginning of a line, so instead of expecting it in the beginning, match it
within the string.
======================================================================
FAIL: test_recipetool_appendfile_patch (oeqa.selftest.recipetool.RecipetoolTests)
----------------------------------------------------------------------
Traceback (most recent call last):
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/utils/decorators.py", line 109, in wrapped_f
return func(*args, **kwargs)
File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta/lib/oeqa/selftest/recipetool.py", line 285, in test_recipetool_appendfile_patch
self.fail('Patch warning not found in output:\n%s' % output)
AssertionError: Patch warning not found in output:
Parsing recipes..WARNING: File /etc/selftest-replaceme-patched is added by the patch /home/pokybuild/yocto-autobuilder/yocto-worker/nightly-oe-selftest/build/meta-selftest/recipes-test/recipetool/files/add-file.patch - you may need to remove or replace this patch in order to replace the file.
NOTE: Writing append file /tmp/recipetoolqaug0kdb4x/recipes-test/recipetool/selftest-recipetool-appendfile.bbappend
NOTE: Copying /tmp/recipetoolqagci9tita/testfile to /tmp/recipetoolqaug0kdb4x/recipes-test/recipetool/selftest-recipetool-appendfile/testfile
done.
(From OE-Core rev: 2289138bdaa17b764821f41a3b3fd0a01cda7440)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the stream can contain invalid binary characters (e.g. from
ppc's bootloader) use surrogateescape decoding to ensure we do process
the character stream, else it can hang/timeout.
(From OE-Core rev: 28a0030430d4cfcaf5dfc3e71bda07cdbfbbf4a7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current parsing was picking wrong targets, leading to the following problem:
AssertionError: Command 'bitbake Parsing recipes..done. -e' returned non-zero exit status 1:
(From OE-Core rev: eaf83a58825d91c7445835b27d843da7532c208b)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bytes type variables are threat different as strings variables in python3,
so convert bytes to strings. This was found when using the
script buildhistory-diff, where the interpreter was yielding this error
TypeError: Type str doesn't support the buffer API
(From OE-Core rev: 3064d36186b47954eb94095217f7bb37e3fce651)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sets are safer when comparing internal elements and positions are not
important. This commit avoid errors observed on python3 builds as reported
on the below bugzilla entry.
[YOCTO #9661]
(From OE-Core rev: f6df164d09a4d4cf58977bf6cc0bc4f4bc71183a)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch contains all the other misc pieces of the transition to
python3 which didn't make sense to be broken into individual patches.
(From OE-Core rev: fcd6b38bab8517d83e1ed48eef1bca9a9a190f57)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved call of decode('utf-8') as close as possible to
call of subprocess API to avoid calling it in a lot of
other places.
Decoded binary data to utf-8 where appropriate to fix devtool
and recipetool tests in python 3 environment.
(From OE-Core rev: 30d02e2aa2d42fdf76271234b2dc9f37bc46b250)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Converted str to bytes before sending to socket.
Converted bytes to str after receiving from socket.
This should fix TypeError: 'str' does not support the buffer interface
for qemurunner.run_serial method.
(From OE-Core rev: 210e290c9251839dc74e3aabdcea3655dd707a50)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
xrange() no longer exists in python 3, use range()
(From OE-Core rev: d022b4335100612d6596cc4c4956cb98ed5873cc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Iterators now return views, not lists in python3. Where we need
lists, handle this explicitly.
(From OE-Core rev: caebd862bac7eed725e0f0321bf50793671b5312)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python3 standardises its use of iteration operations. Update
the code to match the for python3 requires.
(From OE-Core rev: 2476bdcbef591e951d11d57d53f1315848758571)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In python3, strings are unicode by default. We need to encode/decode
from command pipelines and other places where we interface with the
real world using the correct locales. This patch updates various
call sites to use the correct encoding/decodings.
(From OE-Core rev: bb4685af1bffe17b3aa92a6d21398f38a44ea874)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The syntax for octal values changed in python3, adapt to it.
(From OE-Core rev: 737a095fcde773a36e0fee1f27b74aaa88062386)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If fetching source from a git repository, typically within OpenEmbedded
we encourage setting SRCREV to a fixed revision, so change to do that by
default and add a -a/--autorev option to use "${AUTOREV}" instead.
(From OE-Core rev: 000480c42797dd2f03ebc3bc6d1dabfc6a7b75f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add some more variables in appropriate places in recipe_progression such
that the patch_recipe_* functions are able to insert variables in the
right place within a recipe.
(From OE-Core rev: c33ba6cc5d14b1da96f6d906836c50e0346dcf06)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function was assuming that what you wanted was that output lines
had trailing newline characters. If you're just outputting each line
verbatim to a text file then that's fine, but sometimes you start with
the assumption that the lines don't have trailing newlines; thus we
shouldn't allow for the possibility that the caller doesn't want them
and add a parameter to control it.
(From OE-Core rev: fb2bb509ff5c7bd71b41a1dcba3b1bff1d18cf5d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Split out a function from patch_recipe_file() that takes just the lines
as input so we can edit recipe lines in memory. This will be used within
recipetool to ensure we insert new values in the right place.
(From OE-Core rev: d780642f950fb3a9699f466a405a2710d870dd08)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having the package path with all the other package info allows to
reuse more code and have this information outside the package manager,
without additional processing.
[YOCTO #8536]
(From OE-Core rev: 343f762792cbfccffaf3aa901289f9bb0f8cef3d)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes is needed to have a package without extraction when
running a test. This patch adds the functionality.
[YOCTO #8536]
(From OE-Core rev: 49234fe926224c21ef6c8292132620b4716c5263)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This new method extracts the content of package (RPM, DEB, or IPK)
to a directory inside of WORKDIR. The extraction is needed for later
install in the DUTs without using a package manager.
[YOCTO #8694]
(From OE-Core rev: 90d585f59f217f23694a9b02a73b79d18dfdb579)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds the functionality to use a json file to
specify the packages needed for a particular test.
The content of the json file is a dictionary with
dictionaries inside, using the test name as the hash.
The json file must have the same name as the class
module name and must be in the same path.
[YOCTO #7850]
(From OE-Core rev: 1f24ef9a339a2ad34e010f39aa93abdc8d085c85)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This new file just contain one function to return an OE package
manager, this depends in the current packaging method.
[YOCTO #8694]
(From OE-Core rev: 9b4b150ccbcd2f7a0b27d083eb406578584af3fa)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The method getTests() can be useful to all the class,
not just to loadTests().
[YOCTO #8694]
(From OE-Core rev: 667a4549bd51a6e4b487006f4cc1542d2961757a)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update older exception syntax to modern one required by python 3.
Compatible with python 2.7.
(From OE-Core rev: d13f0ac614f1d1e2ef2c8ddc71cbfcf76a8dc3f2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
file() API doesn't exist in python 3, convert to open(). Also handle
some cases where files aren't closed. Compatible with python 2.7.
[Contributions from Ed and Richard]
(From OE-Core rev: 0f4ec13e11bb8abe21aba2a28547dfb9372bc377)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used print function instead of print statement to make
the code work in python 3.
[Changes from both Ed and Richard]
(From OE-Core rev: ced1995694c394d92cb82fb9c25a33dc027a3b69)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having two code paths here makes maintenance difficult, and it doesn't
seem likely that you would use the local case in real usage anyway, so
drop the local support entirely.
This should allow us to resolve [YOCTO #9301].
(From OE-Core rev: 7a4c9c96fee4fb514c2b69b52e811c4f896a16f1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In commit 20ea6d274bb0a9a5addb111f32793de49b907865, debugfs generation
for images using opkg, which included openssl was fixed.
However, that broke the generation of the opkg-based images, that lacks
openssl. The error is a python stack trace, showing that shutil.copytree
tries to copy a non-existing directory.
This relates to [YOCTO #9040].
(From OE-Core rev: f6b0b260ce18a30d04edfb0afb7942b9f9a5480b)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use a common _log_check_common() function (based on the old
_log_check_warn() function) to implement the logic for both
_log_check_warn() and _log_check_error().
The main benefit of this is that now all error messages will be
reported again, not just the first one found. Additionally the output
will now look the same for both error and warning messages.
This removes the context for the error messages. However, since there
was no indication in the output that some of the lines were context,
they were more confusing than helping.
(From OE-Core rev: dd73dcac36b80b3b886a2e9bf575b91c4f60d039)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For each warning found in the log, _log_check_warn() would output a
line stating that it had found a warning, then the actual warning and
finally an empty line. This is quite excessive when there are many
warnings in the log.
With this change the output is instead a line stating how many
warnings were found, followed by the warnings. This makes the output
much more compact and actually much more readable.
(From OE-Core rev: d6e3477749b1d09d40a773e0ac857a24d5851984)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will make _log_check_warn() exclude the same lines as
_log_check_error() does.
(From OE-Core rev: 85f64c68278f797c6f73f002f63d7f46fe80aef4)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before there were three different ways to exclude a line from being
searched for error messages in _log_check_error(). Now there is only
one: an array of regular expressions. This should make it easy to add
more excludes if nedded.
(From OE-Core rev: 321df88088fbfa657b61b2bae32751f03daec46f)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In commit 0387d095 lines with "NOTE:" in them were excluded from the
log check for warnings. However, those lines were only there in the
first place since the regular expression that is used to find warning
messages explicitly included those lines...
(From OE-Core rev: 865ab39f18a52ed84217df56d0e65113e2894d02)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The fact that this function was overridden in the RpmRootfs class
seems to have led to a number of misstakes when changes have been made
to the base function in the Rootfs class. E.g., this change will
properly solve ticket 7789, which was supposedly solved in 38871dc0,
but that change had no effect in practice as the log_check_regex that
was modified for RpmRootfs class was not used by the RpmRootfs version
of _log_check_error()...
The only thing _log_check_error() in RpmRootfs did that the base
function in Rootfs did not do was to skip lines in the log that begin
with a + sign. This has now been moved to the base function instead.
[YOCTO #7789]
(From OE-Core rev: 1eb0a46502fca4b2ee30ccd2508f4e21a40c25ca)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The reverted commit added a warning with the log line that triggered
the log check for error messages before the warning that states that
an error has been found in the log. However, the error line is output
by the call to bb.fatal() that follows immediately after the original
warning, which makes it redundant. Additionaly, having two warnings
contradicts the intent of commit 8dfdd329 where the log warnings were
tidied up.
This reverts commit f9cf31525fc885e1a0f65bd55654631257f87078.
(From OE-Core rev: e509a83c8eb5a572aad7e7451d019fa2469d70c3)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tested generation of .bmap file using wic --bmap command
line option.
(From OE-Core rev: 1f21c46e517685ff1363d3b6f4fd840300b1930b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are parts of the fuctionallity missing when using the
dummy ExportTestContext class in runexported.py.
This changes the use of ExportTestContext dummy class from
runexported.py to the real class in oetest.py.
(From OE-Core rev: b0f105eecf25d334dd5fd0d936ec98cb8430ed23)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pscmd is used by some tests to get the process
running on the target. If the test are exported
there won't be any pscmd attibute in the oeTest.
This adds "ps" as default pscmd.
(From OE-Core rev: 44aa8c3b6747179a0c4c156fc4922d838cdc19a4)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The host dumper is used to get information about the host
running the test when a test fails. This is used for the
autobuilders of Yocto Project.
Now that exported tests have thier own class the host dumper
is not necessary anymore.
(From OE-Core rev: fab3e4865a356ceb73d7deab5b4fd38ed795ca72)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding the class is needed to separate the exported test
from the test image; both test run under different conditions,
i.e. an exported test doesn't require to change the signal
handling.
This change adds clasess ExportTestContext and ImageTestContext,
both of them inherits from RuntimeTestContext. Also refactors
RuntimeTestContext class, to keep the code common in this class.
(From OE-Core rev: ef9618a6e7f99e485cc6b59484d11807475c7823)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found some more syntax cleanups needed for python3.
(From OE-Core rev: 1181d86e8707c5b8e8d43d5e785d7d9cf01fa491)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use print functions for comptibility with python3.
(From OE-Core rev: 0c89a8a276b67a9292ee3100003c789126bd9ea9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want the decorator to leave the function names of the test unchanged. Some
decorators are already using wraps for this but not all. Fix this to be consistent
allowing inspection of the test to give the wanted values.
(From OE-Core rev: 9e4d60b29ff5667d23a89953ce7139b34c11d40b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added test_bmap to imagefeatures tests.
It tests if bmap file is generated for the images and
if the image is sparse.
[YOCTO #9414]
(From OE-Core rev: db27d8fbb44d2cdd524ac992630c781fd0c45b1b)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This new method extract the content of RPM file to a tmpdir,
without actually installing the package.
[YOCTO #9569]
(From OE-Core rev: 5f5c2a0fac5ad2baca162902410064375e8c610c)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes it is needed to have the content of a package outside
the recipe context. This new method extract the content of an
IPK/DEB file to a tmpdir, without actually installing the package.
A new OpkgDpkgPM class was added to share the code for opkg and dpkg.
There were need some changes to opkg_query() in order to use it
with apt-cache output. Also set default values to avoid UnboundLocalError
[YOCTO #9569]
(From OE-Core rev: 7d214b34e11dc57316ed5c1c7747c4601286f6d2)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using the opkg and apt-get package managers the function
opkg_query() can be useful when query for package information.
This change moves the function outside the Indexer class so
the Indexer, OpkgPM, DpkgPM can benefit from it.
[YOCTO #9569]
(From OE-Core rev: 799bc1d1c747aad02b6d844bf55abfbd3ecc034c)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The check now runs at populate_lic time so change this from configure. We
also need to set a SRC_URI so that the check triggers.
(From OE-Core rev: a5970809a2f01dbd152684266e2a3d946d896620)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ordering of dependency variables needs to be deterministic to avoid task checksums
changing. Use an OrderedDict to achieve this.
(From OE-Core rev: 855a2d21503856af392ab2d54ccfa270505ba142)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch add new methods to SSHControl class. These methods
include:
- Copy a dir to DUT
- Delete a file in the DUT
- Delete a directory in the DUT (if empty)
- Delete a directory structure in the DUT
[YOCTO #9565]
(From OE-Core rev: f22afb09fefdcb568d79ccd81277a43dacee2a82)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When enabling extra DEBUGFS image generation with opkg, the following error is
seen when openssl-cnf is included in the image.
Collected errors:
* file_md5sum_alloc: Failed to open file /mnt/cs-builds/anders/oe-build/build-ccu/tmp/work/ccu-oe-linux-gnueabi/ccu-image/1.0-r0/rootfs/usr/lib/ssl/openssl.cnf: No such file or directory.
Lots of similar issues was fixed by an earlier commit in oe-core,
5084ed9401250ed269a49d27b303806ab173c5d5, but openssl-cnf is outside of that fix.
Followup to [YOCTO #9490]
(From OE-Core rev: 20ea6d274bb0a9a5addb111f32793de49b907865)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This test is a subset of the new sstate_noop_samesigs test, and less helpful
when it breaks, so remove it.
(From OE-Core rev: 7157261014e1dcbe9a57e7504dbb0ab2a53aa4d8)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is possible for a Node.js module to have node_modules subdirectories
that contain no package.json file (e.g. iotivity-node has such a
directory). It appears these should simply be ignored, or else with the
way the current code works we will get errors later.
(From OE-Core rev: 8c522f1f536270e195c8c73f5c72801495e7b33b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add two values for http_proxy to verify that changing it doesn't change any
unexpected tasks.
As this causes uninative to fail to fetch, ensure that uninative is always
disabled.
(From OE-Core rev: 7d8ffd22303a5b89cb129e804c124a2d1dedf9ab)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is not enabled by default, as there are still limitations and possible
issues with opkg (and rpm?) packaging data containing broken symlinks for
local indexes:
http://cgit.openembedded.org/openembedded-core/commit/?id=c8e0ec2da9ad4ce1c103966906a85f68c15400dd
There are other use cases for the packaging data to be available in SDK,
since it provides comprehensive info about SDK's contents and in the case of
opkg and dpkg is all text-based and can be easily parsed by simple scripts.
Introduce new "package-management" flag for SDKIMAGE_FEATURES list (similar
to the one already used for IMAGE_FEATURES) that controls presence of the
packaging data in resulting SDK, while unifying this behavior across the
board for supported pkg managers - rpm, opkg, dpkg.
(From OE-Core rev: 9ab934e4aecb759c922049245888dcd2a8c55477)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When enabling extra DEBUGFS image generation with opkg, errors are seen like:
ERROR: core-image-minimal-1.0-r0 do_rootfs: Cannot get the installed packages list. Command '/media/build1/poky/build/tmp/sysroots/x86_64-linux/usr/bin/opkg -f /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/opkg.conf -o /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs --force_postinstall --prefer-arch-to-version status' returned 0 and stderr:
Collected errors:
* file_md5sum_alloc: Failed to open file /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/etc/syslog-startup.conf.busybox: No such file or directory.
* file_md5sum_alloc: Failed to open file /media/build1/poky/build/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0-r0/rootfs/etc/fstab: No such file or directory.
basically for all CONFFILES in the image. This is due to the file rearranging
the rootfs generation code does. If we preserve the /etc directory,
the avoids the problem.
We need to tell copyfile to preserve symlinks since some are present in /etc.
[YOCTO #9490]
(From OE-Core rev: 5084ed9401250ed269a49d27b303806ab173c5d5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added output of test runner to bitbake console output.
bitbake <image> -c testimage now reports test progress
to the console:
NOTE: Executing RunQueue Tasks
...
NOTE: recipe core-image-lsb-1.0-r0: task do_testimage: Started
core-image-lsb-1.0-r0 do_testimage: test_ping (oeqa.runtime.ping.PingTest) ... ok
core-image-lsb-1.0-r0 do_testimage: test_ssh (oeqa.runtime.ssh.SshTest) ... ok
...
----------------------------------------------------------------------
core-image-lsb-1.0-r0 do_testimage: Ran 38 tests in 785.100s
core-image-lsb-1.0-r0 do_testimage:
core-image-lsb-1.0-r0 do_testimage: OK (skipped=1)
Adding more output to the console should also prevent autobuilder to kill
long running tests as ab assumes that test is stuck if no console output
produced by it for a long time.
[YOCTO #8238]
(From OE-Core rev: 06aa68138ec67623892221fbe9516bbb3795b48e)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When installing the esdk with INHERIT += "rm_work", the script complains
about do_rm_work as unexpected output from the bitbake run. This patch
ignores any output lines with do_rm_work and further refactors the
output comparison into its own function creates a new unit test to
verify the fix. The unit test can be run direct from the command line or
via oe-selftest.
[YOCTO #9019]
(From OE-Core rev: d41930e1daa933cf4bf063fa79a2e8fc9129e1b1)
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test to verify that certain classes when inherited were no-ops only passed
if the build already inherited buildhistory.
To ensure that the test works as expected, use INHERITS_remove to ensure that
the classes are not inherited in the base run.
(From OE-Core rev: fc90c5db45933369b8fc0a33d6238876f5e5a087)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe sets SRC_URI and then appends more items to it with +=
(such as the current rpm recipe in OE-Core), the code in
patch_recipe_file() was failing with a traceback. Work around the
problem for now by dropping the existing lines if we understand the
operation, else just set the value outright at the end. This leaves
something to be desired as it either doesn't respect the existing
structure or leaves a mess but it's better than the current
breakage.
We'll need to come up with a better solution later. Part of the problem
is the existing code structure doesn't allow for patch_recipe_file() to
know what's being added or removed - it only knows the final value that
the caller wants set.
Fixes [YOCTO #9458].
(From OE-Core rev: da5cd84794e1ab5c4efcd6250d3b93a46f610744)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When creating an eSDK ensure that any .git directories are not included.
[ YOCTO #9426 ]
(From OE-Core rev: 6a5e2b2196e5654fc54ba5b2e51a390c966fd1b7)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Package names cannot contain underscores yet some npm modules use them as part
of the name, replace them with hyphens in the package name.
(From OE-Core rev: fea932c79c8201e3e7649f4443874ea540e33461)
Signed-off-by: Brendan Le Foll <brendan.le.foll@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, ROOTFS_POSTINSTALL_COMMAND was run only after the opkg rootfs
install post processing phase. This patch makes it generic so it is run fter
any package manager specific rootfs post processing, but before _run_intercepts().
[YOCTO #9248]
(From OE-Core rev: 8f2571881cd01ace88d282a63ad802cab4ab6940)
Signed-off-by: Bill Randle <william.c.randle@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The distribution identifier is often used to create filenames, so it needs to be
safe to use as a filename. Whilst most distributions have e.g. Fedora or Debian
as their name, it is possible that the name contains special characters.
To ensure this doesn't cause a problem strip out any non-alphanumerics from the
distribution name before returning it.
[ YOCTO #9443 ]
(From OE-Core rev: 8a96a7207561e00eb92e4fb69e7340f20bfa2053)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the changes introduced to test the eSDK
the runexported test failed during the execution.
This change fix runexported test in the least invasive
way, because of the release cycle.
(From OE-Core rev: da0abb9679cb1fd639859a2fdbd82101d0a81259)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As more variables were being added it made sense to split this test into two:
one quick test that verifies that the host being 32-bit or 64-bit doesn't impact
the hashes, and another which compares stamps for two builds with several
variables changed and classes inherited.
(From OE-Core rev: d29ede773fc94da5ff932e0cd306295a8d3871a3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a testcase to build a directdisk image and check that the
used disk size is less than the apparent size, as wic now
assembles images as sparse files.
(From OE-Core rev: 2b8299eb6b911e64d9a05b86c07b489d15eeaa5e)
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to support workflows using devtool where a user might want to
modify tasks that exist in locked-sigs.inc, there must be a way to unlock
recipes.
This patch adds that support by allowing the user to add recipes to
SIGGEN_UNLOCKED_RECIPES. Recipes that exist in that variable will have
all their tasks unlocked, as well as any tasks that depend on that
recipe.
For example if foo->bar->baz, if you unlock baz, it will also unlock bar
so that foo can be rebuilt without explicitly specifying bar as being
unlocked.
[YOCTO #9195]
(From OE-Core rev: 8a8fc54d824767a6a94d12a4ace98b0bdbb1aa25)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous message when signatures didn't match between the metadata
and the locked signatures file, the message output was a bit confusing.
Now the message should be of the form:
The zlib-native:do_install sig is computed to be
53531910a2a7848432da89def942a91a, but the sig is locked to
d25ba9035f7ccb308e51bbe1066e8d27 in SIGGEN_LOCKEDSIGS_t-x86-64
which will hopefully be more useful in understanding the problem.
[YOCTO #9195]
(From OE-Core rev: 49eeabfff8bbea69401db41f7219e29acf47af73)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the SIGGEN_LOCKEDSIGS_TASKSIG_CHECK and
SIGGEN_LOCKEDSIGS_SSTATE_EXISTS_CHECK variables to replace
SIGGEN_LOCKEDSIGS_CHECK_LEVEL.
SIGGEN_LOCKEDSIGS_TASKSIG_CHECK will no control whether there is a
warning or error if a task's hash in the locked signature file doesn't match
the computed hash from the current metadata.
SIGGEN_LOCKEDSIGS_SSTATE_EXISTS_CHECK will control whther there is a
warning or error if a task that supports sstate is in the locked
signature file, but no sstate exists for the task.
Previously you could only have warning/errors for both controlled by
SIGGEN_LOCKEDSIGS_CHECK_LEVEL. This was an issue in the extensible sdk,
because we know sstate won't exist for certain items in the reverse
dependencies list for tasks. However, we still want to error if task
signatures don't match.
[YOCTO #9195]
(From OE-Core rev: 0fe2a5e5ffd01e926d0f3d4c78ad9910296e2d1a)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
opkg does not return a non-zero exit code even if it found
errors. When that happens, parsing the output leads to strange
follow-up errors.
To avoid this we need to check explicitly for non-empty
stderr. Reporting only that on a failure also leads to shorter error
messages (stdout may be very large).
(From OE-Core rev: 7d9e915224a9bc451fddfbbfad533d9b06e9987d)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Show the actual command that failed when raising a CmdError. Makes
figuring out what actually failed much easier.
[YOCTO #9344]
(From OE-Core rev: 8e9c03df1810daab7171733f1713ef94d3a18ab2)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using PF to calculate the rpm filename doesn't work when PR server is
enabled and an extra PR value can be injected. Add code to use packagedata
to obtain the full name, allowing the test to work when PR server is
in use.
(From OE-Core rev: 322904f62f11e794543362f04212242567c556a0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So that the packagedata module can be used externally to the core OE
environment, add a missing import.
(From OE-Core rev: da4df2313c8df92cf321a7631a9a389f895d4615)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously the list of packages that are considered unneeded for a
read-only rootfs was hardcoded. This made it impossible to, e.g., have
shadow installed on a system with a read-only rootfs, but where /etc
is mounted writable.
This also lists ${VIRTUAL-RUNTIME_update-alternatives} rather than
update-alternatives (as was previously the case) since this should
actually remove the intended package.
(From OE-Core rev: e3b881d4168e5b02ff00f5c470ba472ab8bbc747)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There appears to have been a lot of copy and pasting of the code
which prints tracebacks upon failure and limits the stack trace to
5 entries. This obscures the real error and is very confusing to the user
it look me an age to work out why some tracebacks weren't useful.
This patch removes the limit, making tracebacks much more useful for
debugging.
[YOCTO #9230]
(From OE-Core rev: 6069175e9bb97ace100bb5e99b6104d33163a3a2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When systemd is enabled as init we need to notice when circular
dependencies in units happen because systemd try to solve this situation
removing the unit itself.
(From OE-Core rev: 04b8fcc95f339282edc9ab405d0ba0e51dbc1d91)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BitBake should append to recipe in a predictable order.
fix for [YOCTO #9145]
test for [YOCTO #9138]
(From OE-Core rev: 51bef86ce52fdc2455cd1879e3e19d5ccc5c1c9c)
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh
Jose Perez Carranza
Francisco Pedraza
Ross Burton
Leonardo Sandoval
Mariano Lopez
Paul Eggleton
Ola x Nilsson
California Sullivan
Patrick Ohly
Juro Bystricky
Stephano Cetola
Jair Gonzalez
Martin Vuille
Michael Wood
Joshua Lock
Linus Wallgren
Samuli Piippo
Robert Yang
Costin Constantin
Davis, Michael
Richard Purdie
Peter Kjellerstedt
Markus Lehtonen
Benjamin Esquivel
Jianxun Zhang
Jussi Kukkonen
Jose Lamego
Aníbal Limón
Mark Hatle
Hongxu Jia
bavery
Edwin Plauchu
Joshua Lock
Bruce Ashfield
Bill Randle
Jose Perez Carranza
Jacob Kroon
Clemens Lang
Maxin B. John
Chen Qi
Anders Darander
Denys Dmytriyenko
Brendan Le Foll
Joshua Lock
Randy Witt
Daniel Istrate