* tar and binutils we can assume are there
* libsocket is only relevant on BSD systems, so we can ignore it.
* Detect more things implying gettext/intltool is needed
* Detect glib-2.0 requirement.
(From OE-Core rev: 2c4c78a6a9970533f3352f1067b2263f45098493)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Much of this was copy/pasted from the extract subcommand code; make it
specific to sync.
(From OE-Core rev: 08ca966dd48db881d8bfb7d7fa0aba49f1f7cffe)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We deliberately leave the source tree alone when resetting in case it
contains any work in progress belonging to the user; tell them that
we're doing this so they aren't surprised about it still existing later
on.
(From OE-Core rev: 1c616802ba2cfb37f8403f1dc6cf91ce3bd99ac2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe in the workspace actually exists as a file within the
workspace (e.g. after doing "devtool add" or "devtool upgrade") then
show the path to the recipe file on the status line for the recipe.
(From OE-Core rev: 29833828a90c8433af3b231b50e99cd97edf19ff)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per the changes to "devtool add", make the source tree path optional
and use the default path if none is specified.
(From OE-Core rev: 83707d1334fb094fd1877bcfd07a83866601048a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having to specify -f is a little bit ugly when a URI is distinctive
enough to recognise amongst the other positional parameters, so take it
as an optional positional parameter. -f/--fetch is still supported, but
deprecated.
(From OE-Core rev: aedfc5a5db1c4b2b80a36147c9a13b31764d91dd)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
recipetool create now has all the logic in it for auto-detecting the
name and version, and using those in the file name - so we can make the
name an optional parameter for devtool add and we pick up the file name
that recipetool has used after the fact.
(From OE-Core rev: 70ab08146e930f1fc55fdf5726a87303e20bd60f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Assuming we're fetching source remotely (from a URI) we can default the
source tree that will be extracted from it to a "sources" directory
under the workspace in order to save the user specifying it if they
don't have a preferred location.
(From OE-Core rev: ffdad964c7271972e4b067e4898bf7c338c25b68)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python's argparse module can't handle when several optional positional
arguments (set with nargs='?') are intermixed with other options. If the
positional arguments aren't optional then this isn't an issue; thus when
changing positional arguments to optional (as we are doing with devtool)
we need this workaround.
This is a pretty horrible hack, but we don't want this flexibility of
ordering to disappear simply because we made some arguments optional.
Unfortunately the corresponding bug remains unresolved upstream even in
Python 3, and argparse is not really designed to be subclassed so it
doesn't make things like this easy.
(From OE-Core rev: 98fd5de373e16fe5d69a3065f844efc8037385bc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bbappend already exists at this point, so we know what its path is -
there's no need to figure it out from scratch here.
(From OE-Core rev: c0754d672966901f22dff1bcd40bbd08d1219c7a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're repeating this in a couple of places, so we might as well have a
function to do it.
(From OE-Core rev: 67a28109a1ee1383d1b17a8dafa4fe510948238b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a few clarifying words.
(From OE-Core rev: 2103fa9dc7faf2189c8b426b87fb9d421a9983ac)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add an "edit-recipe" subcommand that runs your default editor (as
specified by the EDITOR environment variable) on the specified recipe in
the workspace. Note that by default the recipe file itself must be in
the workspace - i.e. as a result of "devtool add" or "devtool upgrade";
however there is a -a/--any-recipe option to override this.
(From OE-Core rev: dbfe8fa2e86c2bb50bef47c389017cdf93543321)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Often the filename (e.g. source tarball) contains the name and version
of the software it contains.
(This isn't intended to be exhaustive, just to catch the common case.)
(From OE-Core rev: 944eacfb849ee69b41e12c9de4f264406281ac6a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some build systems (notably autotools) support declaring the name and
version of the program being built; since we need those for the recipe
we can attempt to extract them. It's a little fuzzy as they are often
omitted or may not be appropriately formatted for our purposes, but it
does work on a reasonable number of software packages to be useful.
(From OE-Core rev: 3b3fd33190d89c09e62126eea0e45aa84fe5442e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes we want to force one handler to run before another; if the two
handlers are in different plugins that's difficult without some kind of
priority number, so add one and sort by it.
(From OE-Core rev: 0219d4fb9cefcee635387b46fc1d215f82753d92)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user specifies a URL that just returns a web page, then it's
probably incorrect (or broken); attempt to detect this and show an error
if it's the case.
(From OE-Core rev: 83b1245b2638eb5d314fe663d33cd52a776a34a7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you specify a URL ending in /, BitBake's fetcher returns a localpath
of ${DL_DIR}, and if you then try to unpack that it will attempt to copy
the entire DL_DIR contents to the destination - which at least on my
system filled my entire /tmp. Obviously we should fix the fetcher, but
at least detect and stop that from happening here for now.
(From OE-Core rev: 7e63a672517518644a37ce006e05b5494c29cf6e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If SRC_URI happened not to be in the pre-generated lines then this code
would error out. This is unlikely to happen with the way the create code
is structured at the moment, but handle it just in case.
(From OE-Core rev: 95d33e90f2d5d9dd5ccc950856b8a939fefb831e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In my testing here it appears make -qn returns an error (exit code 2)
whereas make -n doesn't; I can't immediately tell why based on the
documentation. We don't actually care for it to be quiet since we're
capturing the output, so let's just leave -q off and have this work
properly as a result.
(From OE-Core rev: 30c4cd9efdac400d713dff645f23f2627277d75a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a fetch error occurs, the fetcher already prints a reasonable error -
we don't need the traceback as well, so catch that and exit if it
occurs.
(From OE-Core rev: c2cc5abe34169eae92067d97ce1e747e7c1413f5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you grab a URL for a github repository you'll almost certainly find
it in https://github.com/path/to/repository.git format; but bitbake's
fetcher can't handle that because it'll see https:// at the start and
assume it should use wget to fetch it. If the URL starts with http:// or
https:// and the path part ends with .git then assume it's a git
repository and adjust it accordingly.
(From OE-Core rev: bdbc4cf41d30eddb8a9ed882dedcc1670ce8fdd6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For scripts that use Python's standard argparse module to parse
command-line arguments, create a subclass which will show the usage
the usage information when a command-line parsing error occurs. The most
common case would be when the script is run with no arguments; at least
then the user immediately gets to see what arguments they might need to
pass instead of just an error message.
(From OE-Core rev: d62fe7c9bc2df6a4464440a3cae0539074bf99aa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Although the gold linker problems with DirectFB have only so far been
observed with armv7a, they could potentially affect future arm targets
too. Since there's no particular downside to using the bfd linker for
DirectFB, apply the workaround to all arm targets.
(From OE-Core rev: 82423662e297137657d67d272276a823cf3f3d4e)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the SDK update server hasn't been set in the config (when building
the extensible SDK this would be set via SDK_UPDATE_URL) and it wasn't
specified on the command line then we were failing with a traceback
because we didn't pass the default value properly - None is interpreted
as no default, meaning raise an exception if no such option exists.
Additionally we don't need the try...except anymore either because with
a proper default value, NoSectionError is caught as well.
(From OE-Core rev: 9763c1b83362f8445ed6dff2804dd7d282861f79)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the installation of buildtools fails then we should fail the entire
installation instead of blindly continuing on.
(From OE-Core rev: 34bb63e6c72fb862e0ef0d2b26e1bfddaf7ddb99)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The configuration of the build system within the extensible SDK is
fixed, so there's not a lot of point in showing it; plus it just gets in
the way of the output that's interesting to the user in this context. So
let's hide it within the extensible SDK.
(From OE-Core rev: 6223b73c2dfc326382dbd3c0ae2d7a0cf2cc3b48)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't want a header printed at the start of task execution (which
we'd prefer not to within the extensible SDK) we can accomplish that by
clearing BUILDCFG_VARS and BUILDCFG_HEADER, but that was still printing
a load of blank lines. To keep things simple, check if BUILDCFG_HEADER
is set to something before printing a header.
(From OE-Core rev: d896d77c1d0fc56ff7019bfee3cf06fbc3ede8f3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We inherit uninative in the extensible SDK configuration, and uninative
sets NATIVELSBSTRING to a fixed value, so we don't need to force the
value ourselves.
Fixes [YOCTO #8662].
(From OE-Core rev: 918814c05d670bccb05d61fa848fd0d93da3a7b0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reading IO stats fails because the IO read/write bytes are
being converted to strings, then added to a numeric running
total.
Fix this by converting IO stats to integers.
(From OE-Core rev: 8e2475eecafc0161d25684f5b8239273739de759)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fixes build failure for libxcb on mips
(From OE-Core rev: cad52140997e86c6fee4938369dfce21767f1a63)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop backported 0001-bison-test-fixes-Do-not-use-obsolete-bison-construct.patch
Test cases have been completely rearranged upstream, so ptest support
is fully rewritten.
Merge split bb/inc as there's no other user of the .inc [RB]
As automake insists adding BUILD_SOURCES as a dependency to the "all" target,
remove tests/ from the build unless ptests are enabled. This means native
builds don't need a bison dependency. If ptests are enabled, we build-depend on
flex-native and bison-native for the test suite, and tell it to use the
flex-native binary instead of attempting to run the cross flex it just
built. [RB]
Move in-tree files from files/ to flex/ for consistency. [RB]
(From OE-Core rev: 4fe048b7b32eb3d20a43171b83e8ad2037192d34)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Drop merged patches
* Add patch to fix crash when using the libsolv backend
* Add patch to add pkgconfig support for libsolv
* Add libsolv support via a PACKAGECONFIG option.
(From OE-Core rev: 51265ca2b77c05c94f65d3bc8e1883853b0b540c)
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If no mountpoint is specified for a partition command the partition
will be created but not mounted — mention this in the kickstart
help text.
[YOCTO #8820]
(From OE-Core rev: d1ff1fef987457eb1a5ffe42dbabc7808fa7d598)
Signed-off-by: Joshua Lock <joshua.lock@collabora.co.uk>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Neon support is optional in armv7a so the _armv7a over-ride is not
the best way to determine whether or not the target supports neon.
Since pixman will always use neon in preference to 'simd' (ie VFPv2)
if it can, it's safe to disable the simd routines if the target is
known to support neon.
(From OE-Core rev: ad8337a127a8af321396b78a1cf331b54e4e0515)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building the contents for "--manual" option requires a web browser
or java. That's bonkers so let's not do it.
[YOCTO #8823]
(From OE-Core rev: 35f4e506cd16a6165318c79030d5e54d06f1fd06)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Interworking is required for ARM EABI, so attempting to disable it
via a tuning feature no longer makes sense (support for ARM OABI was
deprecated in gcc 4.7). We can drop '-mthumb-interwork' from
TUNE_CCARGS for the same reason.
(From OE-Core rev: d942f94de8966c839209e8c9a632351d108852c4)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bitbake over-rides for _thumb and _thumb-interwork are undocumented
and are not used anywhere in oe-core or meta-oe. The logic setting up
the thumb-interwork over-ride even seems to be reversed and nobody
noticed, so it seems safe to assume that these over-rides are not
used.
(From OE-Core rev: 351443d71eb246a946b41f12b54d57b36fe1574e)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Comments are old and specific to thumb1. Since oe-core CPU tuning
files aren't really the right place to fully document ARM -vs- thumb,
drop the comments instead of trying to update them.
(From OE-Core rev: 06225600d4d3041da0d28c79058e5b8ceb4874bf)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous attempt to let rpm configuration support both db5 and db6
has a flaw that when the building host provides db6 without its header
the db_create test will false pass. This new patch addresses this issue
by test against the DB_VERSION_MAJOR macro value, which is defined in
both db5 and db6's header.
(From OE-Core rev: 59934080f8311a810e7b5ce82a264d4b9de650ec)
Signed-off-by: Yuanjie Huang <Yuanjie.Huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The script oe-buildenv-internal is called from oe-init-build-env.
Make sure oe-init-buildenv does not return an error if BB_ENV_EXTRAWHITE is
already set, otherwise this will cause oe-init-build-env to fail.
(From OE-Core rev: 9ae79973cfdabd1b4dacddce32735c65fe3544e4)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a check like what we does in package.bbclass
so that the already-stripped QA test can be skipped.
(From OE-Core rev: 2262fdb256954b22dadb2f7c6922e6046c269742)
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@linux.intel.com>
(From OE-Core rev: 3c4de5430aff2d7443f064d698014615e867c58c)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #5953] Add a test to ensure buildhistory does not
change signatures.
Also removed unused imports.
(From OE-Core rev: 9e8f5ff6b0bd6cffcbb991d75487ab6005974000)
Signed-off-by: Daniel Istrate <daniel.alexandrux.istrate@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton
Andre McCurdy
Elliot Smith
Khem Raj
Alexander Kanavin
Alejandro del Castillo
Ross Burton
Joshua Lock
Jussi Kukkonen
Fan Xin
Yuanjie Huang
Juro Bystricky
Jackie Huang
Christopher Larson
Daniel Istrate