One of the current frustrations with the sstate checksums is that
code like base_contains('X', 'y',...) adds a full dependency on X
and varies depend even on whitespace changes in X.
This patch adds special handling of the contains functions to expand
the first parameter and check for the flag specified by the second
parameter (assuming its a string).
The result is then appended to the value of the variable with a "Set"
or "Unset" status. If the flag is added/removed, the stored variable
value changes and hence the checksum changes. No dependency on X
is added so it is free to change with regard to other flags or
whitespace.
This code is far from ideal, ideally we'd have properly typed variables
however it fixes a major annoyance of the current checksums and
is of enough value its worth adding in a stopgap solution. It shouldn't
significantly restrict any propely typed variable implementation in
future.
(Bitbake rev: ed2d0a22a80299de0cfd377999950cf4b26c512e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently tasks have no knowledge of which other tasks they depend
upon. This makes it impossible to do at least two things which would be
desirable/interesting:
a) Have the ability to create per recipe sysroots
b) Allow the aclocal files to be present only for the entries in
DEPENDS (directly and indirectly)
By exporting task data through this new variable, tasks can inspect
their dependencies and then take actions based upon this.
(Bitbake rev: 84f1dde717dac22435005b79d03ee0b80a3e8e62)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This unlikely looking function was found to be eating a lot of CPU time
since it gets called once per trip through the idle loop if we're not
running a maximum number of processes. This was particularly true in
world builds of 13,000 tasks.
Calling the computation code is pretty pointless because until some
other task finishes nothing is going to become available to build.
We can know when things become available so this patch teaches the
scheduler this knowledge.
It also:
* skips any coputation when nothing can be built
* if there is only one available item to build, ignore the priority map
* precomputes the stamp filenames, rather than doing it every time
* saves the length of the array rather than calculating it each time
(the extra function overhead is significant)
Timing wise, initially, 5000 iterations through here was 20s, with
the patch 200000 calls takes the same time. The end result is that
builds get up and running faster.
(Bitbake rev: 4841c1d37c503a366f99e3a134dca7440e3a08ea)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no good reason to separately track var_references and
references so merge them and remove the unneeded variable.
(Bitbake rev: 64d4cbd6360c96574cece70205ea3aecc3f8bae6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In 6a48474de9505a3700863f31839a7c53c5e18a8d the url parameter to a
number of functions was removed. However, not all calls to
latest_revision() were fixed...
(Bitbake rev: 7c94ca56b2fd85a989089f58b3dcce3172a778f2)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
VAL = "" (not shown)
VAL = " " (shown as "")
VAL = " x" (shown as "x")
would all show up rather differently to what would be expected in the
bitbake -e output. This fixes things so they appear consistently.
The output for running some shell functions may also change slightly
but shouldn't change in a way that is likely to cause problems.
[YOCTO #5507]
(Bitbake rev: fcba5ef0053dc0ef5360e4912609e5d52f5046b0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With a SRC_URI = " \
p4://depot/folder/...;module=localfolder/localsubfolder;changeslist=${P4CHANGELIST} \
"
the subfolders of //depot/folder/... get renamed when mapped to the
local folder structure. They lose the first 3 letters. This
patch fixes that.
Issue reported by and patch sent from katutxakurra@gmail.com
[YOCTO #5380]
(Bitbake rev: 40e06dc459d9c0b5d42d65b2d2c846196fd36b1f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There has been a continuing call for supporting wildcard in bbappend
filenames. The wildcard is actually allow matching of the name and
version up to the point of encountering the %. This approach will
allow for matching of the major or major.minor.
Exampes:
busybox_1.21.1.bb
busybox_1.21.%.bbappend will match
busybox_1.2%.bbappend will also match
if we update to busybox_1.3.0.bb the above won't match, but a busybox_1.%.bb
will.
[YOCTO #5411]
(Bitbake rev: 31bc9af9cd56e7b318924869970e850993fafc5f)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using the dry run option (-n), bitbake would still try and fire
a specific fakeroot worker. This is doomed to failure since it might
well not have been built.
Add in some checks to prevent the failures.
[YOCTO #5367]
(Bitbake rev: f34d0606f87ce9dacadeb78bac35879b74f10559)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no good reason to keep passing around the url parameter when
its contained within urldata (ud). This is left around due to
legacy reasons, some functions take it, some don't and its time
to cleanup.
This is fetcher internal API, there are a tiny number of external users
of the internal API (buildhistory and distrodata) which can be fixed up
after this change.
(Bitbake rev: 6a48474de9505a3700863f31839a7c53c5e18a8d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
urldata contains the url so we might as well stop passing around
pointless function parameters. This was done for legacy reasons but
its time to clean this mess up.
This is a first step in cleanup and is a standalone patch but there is
more to be done in a second patch.
(Bitbake rev: 06590cfebbcf6565a17b80cc298e3ecdfaba4656)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A typo in buildinfo helper leads to a bug where
information about tasks is not correctly stored.
This patch fixes the typo.
(Bitbake rev: 67b752993a2c64cba9ccc4fa662f0bddf081e74a)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch changes bitbake to log an error to the
command line when the build is interrupted via Ctrl-C.
This is needed to inform the user that not all tasks
required for the build have been executed, and
the build is not complete.
Internally, the Bitbake server will return a CommandFailed
event that will be logged by Toaster as build failure.
(Bitbake rev: 9a658e8b1511f1b9f91663f546f748fdfbc8965f)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the computed name of a directory contains an undefined variable
reference, bitbake dutifully creates a directory with a name that has
${...} in it. However, the actual task script created then tries to cd
to that directory, and the cd command fails, because no such directory
exists -- because the shell has helpfully removed the ${...} which did
not match any actual variables.
Since we want the name to be used exactly-as-is, add single quotes around
the name so this doesn't cause strange failures running tasks, which
allows us to progress past such failures and get to a point where they
can be diagnosed.
(Bitbake rev: 2809c2e6f2f35f9b08058950be896947ab5a0284)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have do_bundle_initramfs which is a task inserted after compile and
before build. It is not covered by sstate.
If we run a build with a valid sstate cache present, the setsceneverify
function realises it will rerun the do_compile step (due to the
bundle_initramfs task) and hence marks do_populate_sysroot to rerun.
do_install, a dependency of do_populate_sysroot is left as marked as
covered by sstate.
What we need to do is traverse the dependency tree for any setsceneverify
invalided task and ensure any dependencies are also invalidated. We can
stop at any point we reach another setscene task though.
This means the do_populate_sysroot task has the data from do_install
available and doesn't crash.
(Bitbake rev: f21910157d873c030b149c4cdc5b57c5062ab5a6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If an SCM mirror is in PREMIRRORS, the tarball is downloaded and then found
by the "upstream" check and handled correctly.
If an SCM mirror is in MIRRORS, the tarball is downloaded but not used
since there is no "upstream" run after MIRRORS completes. It therefore
sits there useless and unused. This code change forces the upstream to
run after a mirror tarball is found and fixes the usage of SCM mirrors
in MIRRORS.
(Bitbake rev: a66ee0994645aa5658b2f5ea134ed17d89f8751a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using git merge-base for checking for ancestors is nice but required git 1.8.0
which is not in many distrbutions yet. We therefore revert to a more ugly
check using git branch --contains until such times as we can upgrade.
(Bitbake rev: 31467c0afe0346502fcd18bd376f23ea76a27d61)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current use of git log to check if a given revision is present can be
a little fragile.
For example if revision X was on branch A, and then later added to branch
B, the update checks would not notice this since they just check for X
being in the repository.
We also had some autobuilder corruption where an older packed-refs file
was copied over a new repository containing newer pack files. There
was no update to the refs file since the revision was present but
not accessible in any branch.
The correct fix is to check that the required revisions are present
on the specific branches. This patch does this using merge-base.
(Bitbake rev: 89abfbc1953e3711d6c90aff793ee622c22609b1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to track the file where a configuration
variable was defined, this patch bring these changes:
* a new feature is defined in CookerFeatures, named
BASEDATASTORE_TRACKING. When a UI requests BASEDATASTORE_TRACKING,
the base variable definition are tracked when configuration
is parsed.
* getAllKeysWithFlags now includes variable history in the
data dump
* toaster_ui.py will record the operation, file path
and line number where the variable was changes
* toaster Simple UI will display the file path
and line number for Configuration page
There is a change in the models to accomodate the recording
of variable change history.
[YOCTO #5227]
(Bitbake rev: 78e58fed82f2a71f052485de0052d7b9cca53ffd)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
0 (not applicable) is not a valid sstate_result for tasks with
outcome 2 (sstate), which should return 3 (restored), 2
(failed) or 1 (missed).
Sstate_result for tasks with outcome 2 is equal to the outcome
of _setscene corespondent task.
[YOCTO #5220]
(Bitbake rev: 8ff8d75318ea88ba80c744b471e486901ef6749a)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user explicitly asks to build a target that is listed in the
value of ASSUME_PROVIDED, show a warning mentioning that it will be
ignored.
(Bitbake rev: 65be09f5e2a4a41e65c9232e208d8154b822fc4e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the build fails and I click "Edit packages", we should be returned
to the tab we launched the build from. Hob should remember the tab,
not the search state.
[YOCTO #5257]
(Bitbake rev: afdea16516084ef6c046d80e12bf244f25a9da50)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The buildstats file path changes based on the
optional PE variable that may be defined for a
recipe.
The toasterui simply ignored the PE value, and
as such it didn't correctly reach buildstats files
for some of the tasks.
This patch fixes the issue.
[YOCTO #5073]
(Bitbake rev: 97b8ab88edc7c8dfb26b4cf305701ec96e52cc4f)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch addresses an issue where a failed sceneQueue task
entry was not updated on the Fail event. As a result, it
always showed the task as not-available.
[YOCTO #5216]
(Bitbake rev: 9b99a417f58381bac4bda412bcfd11de50403318)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The AUTHOR field in most recipes is not defined,
or it's not really consistently set in the metadata,
Also does it seem particularly useful.
This patch removes the AUTHOR variable from the
toaster system
[YOCTO #5449]
(Bitbake rev: da3ac049300be84defab7b32b0b99ab07c7d0a27)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also removed some redundant file manipulation code
Based on patch sent by Stefan Stanacar <stefanx.stanacar@intel.com>
(Bitbake rev: e054c1e7c8581f66082fcdfb89769401ca6e78a3)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since -g is required, tell the user exactly so.
(Bitbake rev: f05f74e98b0dd567a8b0cb85dc8183716619991b)
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Toaster needs to record information about packages
installed on a built target image, and dependencies
between these packages.
This patch fixes a bug where the variable from the
server wasn't read correctly leading which caused
the buildhistory to not be processed correctly.
Additionally, two display issues in the package table
were fixed, issues that lead to package information
being displayed incorrectly.
[YOCTO #5197]
(Bitbake rev: ab4bc18409d80de6d069e3dd76c3c54964fe5764)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the Configuration table, we need to link prefixed / suffixed
variables to the corresponding variable descriptions in documentation.conf.
[YOCTO #5198]
(Bitbake rev: 641d9c4fda5fe978154fdfab978c3c09e3906eab)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When building a single file, the cooker will recreate
the recipecache from scratch.
I suspect this is a remnant of past code, since:
* the current recipecache works fine
* the new recipecache will not have all the fields as
requested by HOB_EXTRA_CACHES setting
This patch disables recreating the recipecache, leading
to shorter times when building single build files
(-b option) and better compatibility with Toaster.
(Bitbake rev: 618d69b00075981b8553513130d7deb1aed61578)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bitbake tasks may be of type 'python' or 'shell',
or they may not be executed at all, which is record
as task type 'noexec'.
In order to record proper task type, this patch:
* creates no exec task type as the default value in
the toaster model definition
* adds full task flags to the bb.build.TaskStarted event
in build.py
* if the task actually starts, the toaster ui will
record the type of the task as either 'python' or 'shell'
based on the task flags.
[YOCTO #5073]
[YOCTO #5075]
[YOCTO #5327]
(Bitbake rev: 6648c57e6d369fc009ea3a9fe939def5d2c67bf5)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Toaster needes to record extra data that needs to
be moved at the time of the dependency tree dump.
This data includes:
* layer priorities for recording in the layer section
* the inherit list for each PN which allows to determine
the type of the PN (regular package, image, etc).
This patch adds this data to the dependency tree dump.
(Bitbake rev: 7636aba37320aaf9b044d3832ddc21af51ccd69c)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the data values may come of as None through the event system,
and the UI would encounter a problem saving the Configuration.
It would be trying to save these values as NULL in the
database, which is not allowed.
This patch adds more verification for data coming through
the event system.
Other minor updates:
* update for the event model from toaster.bbclass
* minor code flow fix in the event system
(Bitbake rev: 03fafd086381723c6486522873671515824e49f2)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This dialog is not needed. Instead "Edit packages" button should
redirect to Packages list.
[YOCTO #5257]
(Bitbake rev: aa2e86a2ac28414f6d25fcd541a6ed2b50f15a2c)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Trying to use a server with username and password authentication
within the URL of the SRC_URI variable doesn't appear to work.
This patch adds the missing parts to the hg fetcher to make this
work properly.
(Bitbake rev: dc3d6d73e44802c203b3f7247f6f212acc2f69bf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When Hob receives a bb.command.CommandFailed event, it doesn't show any error,
because the error_msg is empty. If so, it is hard to detect the issue, because
Hob continues to run till it blocks because of an information gap.
[YOCTO #5097]
(Bitbake rev: a5abd1826f34e6a7eefa837620b846e9b62ae758)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have faced a corner case situation where the 'last changed
revision' returned from svn info is wrong. It happens when the last
revision is a directory move. e.g. if we assume that the svn
repository at revA has root/x/y/z/foo/bar and it is moved to
root/a/b/c/foo/bar in revB, then svn info 'last change revision' will
return revA. As such when using AUTOREV, we are going to attempt to
retrieve root/a/b/c/foo/bar (as per SRC_URI) but at revA when it did
not exist.
So this patch changes how we retrieve the latest revision and uses
'svn log --limit 1' which gives correct result in all tested cases.
(Bitbake rev: 17d8ef0b813a05c231e3dbe6e8bc82a4a9b1d2f8)
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Filesystems like btrfs and reiserfs sets the inode count to 0, since
they don't have an inode concept. This is expected, and having a warning
show up every time you run bitbake can cause undue concern.
(Bitbake rev: f3ac2d3678f48c68a250a0a20c08cf8687322d38)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding a new bitbake UI interface named 'toasterui'.
'toasterui' listens for events and data coming from a
bitbake server during a run, and records it
in a data store using the Toaster object model.
Adds a helper class named BuildInfoHelper that
reconstructs the state of the bitbake server and
saves relevant data to the data store.
Code portions contributed by Calin Dragomir <calindragomir@gmail.com>.
(Bitbake rev: 62200ff6694b21fbd5abf009a6f47ad93adf5309)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A BBHandledException means we already showed an error to the user so
we shouldn't show a stack trace as this just confuses things further.
(Bitbake rev: 8a8bafc8ded98364a31878b23c64503a53affcd1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These functions in the main bb module have long been deprecated
and moved to other modules. Finally remove the compatibility links.
(Bitbake rev: ccd181c3ed4852e2b9169cf19aaf18aeacddcc18)
(Bitbake rev: d7f817518c5df2524a4bcf008ba63c71a8eb48bb)
(Bitbake rev: 89b31a4fb44f2c2ad0bb4210151652cd3730418d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid storing paths to files in SRC_URI when writing out the the
file checksums to siginfo files. This prevents a move of the source
directory being reported by bitbake-diffsigs as files being removed and
then added (the signature itself is not affected since the file paths
have never been included in the signature).
This has required the format of the file checksums in the siginfo file
to be changed from a dict to a list of tuples (in order to handle
multiple files with the same name under different paths, which is
uncommon but possible); the code remains backwards-compatible with older
siginfo files that use a dict however.
Fixes [YOCTO #5245].
(Bitbake rev: e4d3077c5b0cc57964640512f3646c2d73c1d855)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if errors occur when starting the PR service, there is a race that
occurs since the UI runs various commands including starting builds before
processing the CookerExit(). By adding the error state and refusing to run
async commands in this mode, builds are prevented from starting and the
UI reaches the exit code with the system shutting down cleanly.
(Bitbake rev: 42fa34142ea685f91115a551e74416ca28ef1c91)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change is needed to inform the user that selecting
live type means that the system will build a hddimg and iso
image.
(Bitbake rev: 5051f59976de4e099bb434aeea414de5a67a069f)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The patch that implements removeConfigurationVar method was made before
merging the patch that replaces "added by bitbake" with "added by hob".
This patch corrects this issue.
[YOCTO #5284]
(Bitbake rev: 42601a5edef0316767b952b162123534aa8fee18)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Showing a traceback when unable to connect to a bitbake server is
rather ugly. This change allows us to show a sensible error message.
(Bitbake rev: 26913202f83fbbecdce95da59515af102bcde4a7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In Hob settings, there is a tab to add/remove extra settings. This
patch implements a way to "remove" variables from conf files, through
bitbake. But, to keep the history assigment of the variables synchronized,
instead of removing, it replaces the lines with blank lines.
[YOCTO #5284]
(Bitbake rev: bd720fb63cef6b399619b8fbcaeb8d7710f2d6df)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
MACHINE var is saved using early assignment operator.
Calling MACHINE=x bitbake core-image-... works properly.
Comment "#added by bitbake" is replaced with "#added by hob".
[YOCTO #5070]
(Bitbake rev: 2d0ec8ff083b636a6cf98de3278900eb95c3def6)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
print disappears into the ether, so use logger.warn and clean up the messages.
(Bitbake rev: 90f91f7402ff69f3fe9fba5f94a53d371303ce34)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Display a busy cursor while the configuration is saved.
[YOCTO #4846]
(Bitbake rev: fdb2e0120f189e97b8fdb6eb72d77a3100ba3018)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The parser never has supported it, the datastore API did happen to work
but whitespace in key names is a really bad idea and not something I think we
should encourage or support.
Fix test case failures after excplitly ignoring it for variable expansion
purposes.
(Bitbake rev: a2074ddaba6f53962d6caf34dbd27bdbc259935b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code is happily trying to expand variable names containing newlines,
spaces and tabs which are illegal characters in variable names. This
patch stops it doing this. This will change dependency checksums
since some rather weird dependencies were being attempted to be expanded.
(Bitbake rev: 37e13b852b33d98fa40f49dc1e815b3bbe912ff0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If my build starts from a YP standard image recipe, the 'Save image
recipe' dialog should be empty.
If my build starts from a custom image recipe, the 'Save image recipe'
dialog should populate the 'Name' and 'Description' fields with the values
set for the custom image recipe.
[YOCTO #5004]
(Bitbake rev: 10757c529fe0b4b9a39740d269831347a3aab4a0)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On Linux its not possible for processes to regain a previous nice level after
it has changed. Its therefore not possible to have a core low priority and
then raise the priorities of individual tasks.
This variable allows us to do something like:
BB_TASK_NICE_LEVEL = "5"
BB_TASK_NICE_LEVEL_task-testimage = "0"
to give priority to specific tasks which the BB_NICE_LEVEL functionality
doesn't give us the option of.
(Bitbake rev: 94d82997220c6cfc7028f76719df028ba8254a5c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding the sstate-related hash for all runqueue and
scenequeue tasks, as it's needed in the WebHob data.
(Bitbake rev: b6e2ce1cf7a0ede890f08fabf536a556dc4263c5)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding the generic bb.event.MetadataEvent that is
targeted specifically at metadata usage. This is
needed in order to let the metadata code send and receive
events during asynchrous execution without having
to define each event specifically in Bitbake.
Metadata code should subscribe to and fire the MetadataEvent
in order to communicate asynchronously, and identify
the object using event.type field, and parse the
data in the event.data field.
Knotty UI will ignore these event by default.
This deprecates RequestPackageInfo/PackageInfo, and that
event pair will be removed in the future.
(Bitbake rev: ae1ea51aaab73e010d1c3db39df058bebebc11dd)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding the 'getAllKeysWithFlags' read-only command that will
return a dump of the global data state, together with specified
flags for each key. The flag list is passed in as the first
parameter to the command.
This will be used by UI clients to get the build configuration.
(Bitbake rev: 3e094da513e1220319288806cb76ddf804772afd)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The loaded cache modules may add extra attributes to
the recipecache, that will be populated by the cache
classes required by the UI. These attributes
will be used by the UI to display relevant information.
Adds cachefields cache class field to specify
for each cache class which attributes will be set
in the recipecache.
Adds code to automatically expand depends tree with the
fields exported by the extra cache class.
Fixes a cache field name in the HOB UI.
(Bitbake rev: 47c171005fb3803d936e65fcd4436c643883ae16)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds task identifying information for all
runQueue and sceneQueue events, and for bb.build.Task* events.
This will allow matching event to specific tasks in the UI
handlers processing these events.
Adds RunQueueData functions to get the task name and task
file for usage with the runQueue* events.
Adds taskfile and taskname properties to bb.build.TaskBase.
Adds taskfile and taskname properties to the *runQueue* events
(Bitbake rev: b4a5e4be50d871a80dbe0993117d73f5ad82e38f)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding a CookerFeature that allows UIs to enable
receving a dependency tree once the task data has been
computed and the runQueue is ready to start.
This will allow the clients to display dependency
data in an efficient manner, and not recompute the runqueue
specifically to get the dependency data.
(Bitbake rev: 75466a53b6eece5173a9bfe483414148e4c06517)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implementing feature set selection that allows a client
to enable specific features in the server at connection time.
Only enabling of features is supported, as there is
no way to safely remove data loaded into the cooker.
Once enabled, a feature will remain enabled for the
life of the cooker.
Client-server connection now supports specifying the feature
set required by the client. This is implemented in the Process
server using a managed proxy list, so the server cooker
will now load dynamically needed features based on what client
connects to it.
In the XMLRPC server the feature set is requested by
using a parameter for registerUIHandler function.
This allows observer-only clients to also specify features
for the server.
The server code configuration now is completly separated
from the client code. All hardcoding of client knowledge is
removed from the server.
The extra_caches is removed as the client can now specify
the caches it needs using the feature. The UI modules
now need to specify the desired featureSet. HOB is modified
to conform to the featureSet specification.
The only feature available is CookerFeatures.HOB_EXTRA_CACHES
which forces loading the bb.cache_extra:HobRecipeInfo class.
(Bitbake rev: 98e594837aab89ea042cfa9f3740d20a661b14e2)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The change to use the expansion cache in VariableParse was incorrect as
it was adding in references it shouldn't have been. This patch corrects
the codepaths and ensures the references are correct.
The cache version is bumped since the previous bug could have leave
to invalid checksum calculations and a clean cache is therefore desireable.
The impact of the bug was that sstate was not getting reused when it should
and some tasks were also being rerun when they should not have been.
(Bitbake rev: 8a42d082315bd6ce091d006bf83476db257fa48b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The syntax used for checkPackages implies a copy is returned but it
did not do so. Make it so.
This is fixes universe builds where error messaages were being shown
but there should have only been warnings.
[YOCTO #5222]
(Bitbake rev: 97db2a0792d605f27d434bc6a4acce52857deee1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sanity test failures are no longer fatal with this change so whilst
its the right idea, the code paths need more work.
This reverts commit a50017ba71250e1710a6425b60ac7e3f03d88295.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With new bitbake UIs having the cooker exit at 'random' points
in the codebase is problematic. This patch raises an exception
which matches the siutation instead.
(Bitbake rev: a50017ba71250e1710a6425b60ac7e3f03d88295)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move the variable lookup to the outer loop for performance, replacing
a now unneeded parameter (after the previous changes).
(Bitbake rev: 8a59a8707cecbde257fca169775ce8ff7709928b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When looking up flag variable dependencies, large chunks of the function
aren't needed. Optimise the function flow accordingly for speed.
(Bitbake rev: 1bf3aee698ad35f6815ea2c75471a96511a29d55)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of multiple calls to getVarFlag, make one call to getVarFlags, only expanding
the flags that need to be expanded. This improves performance.
(Bitbake rev: eba1e9545cc933820d40de96f023b2307b3c4d0b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a variable references another but it isn't set at present, the
reference wasn't stored. It really should be marked as a reference
and the higher level dependency code can handle as appropriate.
(Bitbake rev: b05b748b2153c941b95cd36fb22aaafc4dbf3791)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow a list of flags to expand to be passed into getVarFlags. This
is useful within bitbake itself to optimise performance of the
dependency generation code.
(Bitbake rev: a3ae7efdf750fc5bb9ff5a75defbcfdab1912dbe)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Simple if xxx checks end up calling len(xxx). We're interested in the specific case
of None which means we can break out the iterator much earlier after the first
item. This adds in the specific tests for None in what is a hot path in the
data store code which gives small performance gains.
(Bitbake rev: a4d81e44a7cd3dafb0bf12f7cac5ff511db18e60)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Compute a cache of the list of potential export variables so
that we don't have to compute the list from scratch.
(Bitbake rev: f41f46f7eaa6889edeb3a4e4ddedc07084686c60)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Profiling shows the creation of keys() has overhead and we're better using
an iterator rather than the memory associated with the huge list of keys
when iterating the whoe datastore. We minimise the number of times
we do this to twice only per recipe.
(Bitbake rev: e63448d9ee331b0f45fb9a0197d0dbee49eb2fa0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When in VariableParse, use the expand_cache if possible rather than looking
up data. Ultimately it would come from the same place but this short cuts
a heavily used code block for speed improvements.
(Bitbake rev: f682b8b83d21d576160bac8dc57c4c989b4dc555)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Debugging showed the variable expansion regexp was catching python
expressions (starting with @). Since these are caught by their own
dedicated regexp, stop matching these for the plain variable expansion
for small performance improvements.
(Bitbake rev: c630d564285f55f9db10c18269bd310df797430e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All the values we need are already guaranteed to be in the lookupcache
so rather than fetch variables again, just use the cache. This gives a
small performance improvement and simplifies the code.
(Bitbake rev: 8ffaba61da7f195d7c3b64dce35b6a56272aecae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The if statement current causes the size of parent to be calcuated which
is like a len() operation on a datastore. Since we're only interested
whether the value is none, checking explictly for this gives a
small performance gain.
(Bitbake rev: 43a245bde318545ea75ca4ce7894395c1cf9b32a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean-up to avoid duplication and promote code reuse to factor
taskdata creation into a common function.
[RP: minor tweaks]
(Bitbake rev: 468c221449290c4f196e87f7d8e23fcd7db86135)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding a runQueueTaskSkipped to notify that the tasks that are not
run either because they are set-scened or they don't need an update
(timestamp was ok).
(Bitbake rev: cf4a0c7aa82090876ae652b611acfab3ce2688f7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We add the path to the logfile for all Task events except TaskInvalid
so that we can trace back the logfile locations at some future point.
TaskInvalid doesn't ever have a logfile.
(Bitbake rev: 8344d84c609446f59f9619cc7ca0d693b7e2bbd6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Exiting from the server is antisocial, instead we should raise an exception. This
will correctly fail the current command and reset the server state. We use
the handled exception since for these conditions to occur, something was
already displayed to the user.
(Bitbake rev: dacc94bcace85a2e95aee2dccd8e680c59e4545f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Only display a CommandFailed ERROR: message if there is an error to display.
Only display an errors summary if we actually displayed errors.
(Bitbake rev: 568ea00acd226d48e725bb01d4f8c410ed1eaa61)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Empty messages should trigger CommandFailed, not CommandCompleted as
otherwise the exit code will be incorrect.
(Bitbake rev: 70a8ead31f9ffc987d9c6db61a926f7a9af8f8b1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After running a command on the server, it needs to reset to the initial
state. This ensures that subsequent clients start from a known state
and notice any configuration changes.
Ultimately we may want to do more than this buts a good start and better
than nothing.
(Bitbake rev: dd15648fc2654b8d7c3e00ea7ab3dbf04f24f24b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The shutdown state causes the server to finish what its doing, stop was
them meant to completely stop it. It doesn't mean the server is stopped
though. Renaming the current stop event for forceshutdown gives more
meaning to what it actually does. The stopped namespace then becomes
available to indicate a completely stopped server.
(Bitbake rev: 12e9d33bfae5294e3870dfd1202f63383ad05e92)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the cooker event data isn't rebuilt upon reset and the cache
configuration cannot be changed after init. These are both bad things
and this patch refactors the init/reset code so that it is possible
to reconfigure the server.
(Bitbake rev: 1193b8d76fcb6cb87e9ec135a2514370d7dd90ac)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This call only ever happens in cooker context now so we can drop the
nasty worker check from here.
(Bitbake rev: bc0b30199a8e3624c5b9914430adbcc7c6bd4497)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BitBakeUIEventServer is an unused class that pushes UI
events over a separate thread.
The current version of XMLRPC server works just fine with
the classic UI event handlers, so this class is not needed.
(Bitbake rev: 8e8e17631d790271b1be747c4b45059ec38ab606)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake wasn't reparsing when _remove items were added to its configuration
and equally, appends/prepends were also being badly tracked. This
change enrures these variables are accounted for in the configuration
hash.
[YOCTO #5172]
(Bitbake rev: 62914f9208ef2427a34daa523af857f4027900eb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BB_PRESERVE_ENV wasn't working since data.inheritFromOS wasn't getting a
correct list of keys to import into the data store. This fixes
things so it does add all environment variables into the data store
when BB_PRESERVE_ENV is used.
(Bitbake rev: 843e9339c5ee3c99657a40a0e2c7dbd777b6ef06)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding an event to be fired when a scene task is completed.
It is analogous to the run task completed event, and has
been missing for some reason.
(Bitbake rev: 73b8f4d3fbeaf1b330a66d76012d0a5cef8dbe2d)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There would be an race issue if we:
$ bitbake make-3.81 make-3.82
This because they are being built at the same time which would cause
unexpected problems, for example:
[snip]
ERROR: Package already staged (/path/to/tmp/sstate-control/manifest-qemux86-make.populate-sysroot)?!
ERROR: Function failed: sstate_task_postfunc
[snip]
Or there would be python's strack trace such as:
[snip]
*** 0004: mfile = open(manifest)
0005: entries = mfile.readlines()
0006: mfile.close()
0007:
0008: for entry in entries:
Exception: IOError: [Errno 2] No such file or directory: xxx
[snip]
[YOCTO #5094]
We can quit earlier to avoid this kind of issue when two versions of the same PN
are going to be built since this isn't supported.
(Bitbake rev: ab377c00c33a2d296bfda1b0b6c2a62b29d1004f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The runtime provider debug message is the same as the build time debug
message, make them different would be better.
[YOCTO #5067]
(Bitbake rev: 92b624cbc2711d3d859994099fb63918dfd0031a)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When displaying larger number of events the client can get caught up in displaying
the footer, then immediately overwriting it. To avoid this, wait for pauses
in the event stream before displaying the footer to give a slightly more
friendly feel to the UI.
(Bitbake rev: 5d706c7cd6ee8d83b67ff18312d4c8119bea8878)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to the worker split the ${DATE} and ${TIME} variables could end up
with different values for different workers.
E.g., a task like do_rootfs that is run within a fakeroot environment
had a slightly different view of the time than another task that was not
fakerooted which made it impossible to correctly refer to the image
generated by do_rootfs from the other task.
(Bitbake rev: 756cc69ebf8bfe8455d0c90f288dd51be2499773)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Selected custom image recipes should be cleared from the combo the moment
you change your selection. The idea is to always perform the selection of
those images in the same way (i.e through the "Select from my image
recipes" option).
[YOCTO #5001]
(Bitbake rev: 94483ee5ae9f4051bccd660c4718c36564e17161)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
DISTRO_FEATURES_remove = "opengl" wasn't working as expected. The reason
turned out the be the indirect reference to opengl and the fact _remove was
operating on unexpanded data.
This patch rearranges some code to ensure we operate on expanded data
by moving the expand cache handing into getVarFlags instead of getVar.
(Bitbake rev: 181899bd9665f74f8d1b22d2453616ad30d26d9e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before saving the packages for a custom images in a .bb file,
the packages were saved in bitbake memory. Now all the variables
are saved in conf file, so saving PACKAGE_INSTALL is not needed anymore.
Moved were LINGUAS_INSTALL is set, because both conditions are for testing
if a custom image is saved.
[YOCTO #5101]
(Bitbake rev: 8757f962b92e7668f40d2d8bd9e762b152f91f7b)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BUILDNAME is set from cooker by default, so since the worker split it
will not be set when executing functions. In OpenEmbedded this results
in /etc/version (which is populated from BUILDNAME) not having any
content. Pass this variable value through to the worker explicitly to
fix the issue.
Fixes [YOCTO #4818].
(Bitbake rev: 92940b0427d9b2b3f95e27c230ec1e36638a34bc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cookerdata.findconfigFile method has a new parameter. Changed some calls.
(Bitbake rev: dce0f9d4afe0986e2dd0146944fc4ac9dde275e4)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was missed off in a previous patch.
(Bitbake rev: ad7664edd40fa46e6f6fec2144403e3b6fc3a639)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the server only expects a single client to connect (i.e.
no bind parameter set, so there is no way for the
clients to get the server port), stop the server after
the first client exits.
(Bitbake rev: eb6bae56f62082bf147045311154cbae4bca0f4c)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the basename of the .bb file is not unique, for example xxx-native
and xxx can overwrite each other. If this happens whilst running, you can
get odd backtraces as one file is parsed as another tries to write out
new data.
Avoid issues by using PN for the output filename instead.
(Bitbake rev: c9534f8e59d44b885334607ed90a3be2e492ec69)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing backend server implementations were inefficient since they
were sleeping for the full length of the timeouts rather than being woken when
there was data ready for them. It was assumed they would wake and perhaps did
when we forked processes directory but that is no longer the case.
This updates both the process and xmlrpc backends to wait using select(). This
does mean we need to pass the file descriptors to wait on from the internals
who know which these file descriptors are but this is a logical improvement.
Tests of a pathaolgical load on the process server of ~420 rapid tasks
executed on a server with BB_NUMBER_THREAD=48 went from a wall clock
measurement of the overall command execution time of 75s to a much more
reasonable 24s.
(Bitbake rev: 9bee497960889d9baa0a4284d79a384b18a8e826)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a better value that the earlier infinite timeout yet still
allows for servers with high loads. It does mean the bitbake process
can hang at exit for the timeout period but that should never happen
and only happened for me in some test cases which wouldn't happen
in normal use.
(Bitbake rev: ab8d926b9bc27c58011e7db9327e031ac76ba34b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It should be possible to run a build anywhere on the filesystem and have
bitbake find the correct build directory if its set somehow. The BBPATH
variable makes perfect sense for this usage. Therefore use any available
value of BBPATH to search for conf/bblayers.conf before walking the parent
directory structure.
This restores the option of being able to run bitbake from anywhere if
the user has set things up to operate in that environment.
(Bitbake rev: e86336b3fe245bc97fe74c9b9d6a21d38a536fb7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By definition, bblayers.conf is at the top of the build tree. We'd like
to support running bitbake anywhere within that build tree but TOPDIR
gets set to wherever cwd is. Change the code to reset TOPDIR
to the top of the build directory.
This shouldn't break anything but does make the system more usable.
(Bitbake rev: b266db27de0bba19a418e4d42e870649136b116b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is more idiomatic, and from the limited performance testing I did, is
faster as well. See https://gist.github.com/kergoth/6360248 for the naive
benchmark.
(Bitbake rev: 1aa49226d5a2bac911feeb90e3d9f19529bc1a3e)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When an image from scratch is selected, and recipes parsing
is canceled, the image shown by the combo box isn't correct.
[YOCTO #5000]
(Bitbake rev: f8166ace0bd9155199166990ce15da24eb2e793b)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create the _evt_list for hob; it is longer than the knotty
uses because it handles more events.
(Bitbake rev: 715aed74f972bb6e9b6a5130ca9ede48d4f79f0a)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default for the mask will be * (all the handlers)
(Bitbake rev: 4c95e5f46cf2a656100bbf5a0e5a09d506abf9b9)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
updateCache handles the logic for shutting down the parsing so we need
to call it for all cases when we're not running.
This fixes hangs if Ctrl+C is pressed during parsing.
(Bitbake rev: 552b8935dd2f9f11e8d5c08a597a7e966b891480)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are long standing complaints about the fact its very difficult
to remove a portion of a variable. The immediate request is for a -=
and =- operator. The trouble is that += and =+ are "immediate"
operators and are applied straight away. Most people would expect
-= and =- to be deferred to have the effect most people desire and
therefore implementing -= and =- would just make the situation more
confusing.
This deferred operation is much more similar to the override syntax
which happens at data store finalisation. The _remove operator is
therefore in keeping with the _append and _prepend operations.
This code is loosely based on a patch from Peter Seebach although it
has been rewritten to be simpler, more efficient and avoid some
potential bugs.
The code currently only works on space delimited variables, which
are by far the most commom type. If bitbake is ehanced to support
types natively in future, we can adjust this code to adapt to that.
(Bitbake rev: 9c91948e10df278dad4832487fa56888cd58d187)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add functionality to allow UIs to update and change the types of events they
recieve. To do this we need to add a new command and also need to be able
to obtain the current event hander ID. In the case of xmlrpc, this is
straightforward, in the case of the process server we need to save the result
in a multiprocessing.Value() so we can retrive it. An excplit command
was added to the server API to facilitate this.
The same function can also be used to mask or unmask specific log messages,
allowing the UI to optionally differ from the standard set of message
filtering.
Based upon work by Cristiana Voicu <cristiana.voicu@intel.com>
(Bitbake rev: ba5a6c88785d9889d4172ec79937ac2a5555327e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The standard python socket connect has long timouts which make sense for remote
connections but not local things like the PR Service. This adds a timeout
parameter to the common xmlrpc server creation function and sets it to a more
reasonable 5 seconds.
Making the PR server instantly exit is a good way to test the effect of this
on bitbake.
We can remove the bodged timeout in the PRServer terminate function which
has the side effect of affecting global scope.
(Bitbake rev: 8c01cff94787abbb64fbdf0c16cd63f8f97a7e03)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out we have a number of different ways the process server termination can
hang. If we call cancel_join_thread() on the event queue, it means that it can be left
containing partial data. This means the reading of the event queue in the terminate()
function can hang, the timeout and block parameters to Queue.get() don't make any
difference.
Equally, if we don't call cancel_join_thread(), the join_thread in terminate()
will hang giving a different deadlock.
The best solution I could find is to loop over the process is_alive() after requesting
it stops, trying to join the thread and if that fails, try and flush the event
queue again.
It wasn't clear what difference a force option should make in this case, we're
gracefully trying to empty queues and shut down regardless of whether its a SIGTERM
so I've simply removed the force option.
(Bitbake rev: c5c8f33ca4b81877a0115887849881001b745bf0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* resolve_file was behaving different when relative and absolute
paths were passed to it
* include relative-path/non-existent-file.inc
works correctly resolve_file throws IOError, BBHandler.py:handle()
doesn't catch it, ConfHandler.py:include() catches IOError and shows:
DEBUG: CONF file 'relative-path/non-existent-file.inc' not found
* include /absolute-path/non-existent-file.inc
was failing, because resolve_file just returns fn,
BBHandler.py:handle() calls bb.parse.mark_dependency(d, abs_fn)
which throws:
OSError: [Errno 2] No such file or directory: '/absolute-path/non-existent-file.inc'
and parsing fails.
Ad isfile() test for absolute fn and throw IOError to make
resolve_file behavior consistent for both paths.
* I know we had some issues with -b relative-path-to-recipe.bb and
absolute path, so consider this patch only as RFC and documentation of
this problem
* Catch OSError too in ConfHandler.py:include() e.g. in case the file exists, but user
cannot read it or something like that.
(Bitbake rev: b0bbd89a4f0b98fa1ab28b8e0526cd9ddb76fa57)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently one of the bigger bottlenecks in bitbake is passing all the
log messages over IPC to the UI. This is worthwhile if the UI is going
to use them, pointless otherwise. The memory resident bitbake suffers
from this performance issue particularly badly.
This patch filters the log events on the server side with the global
log levels and hence reduces the traffic. This speeds up parsing
(18.5s down to 17s) and bitbake general command overhead is reduced
(7.3s for a NOP to 6.2s).
What isn't added here is general event filtering or the ability to
change the log levels once set. Provision is made for adding this
in a follow up patch though.
(Bitbake rev: 1bf0e88f57ba0bca62532e81d0d62cf88e2abcbb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'courtesy' symlink for log.do_xxx are quite useful when debugging, so
with this commit, we now get similar 'courtesy' symlink for run.do_xxx
scripts.
We only create symlink for tasks, not individual functions.
The symlink is create right before the actual runfile is created, indeed
we cannot create the symlink right after running the task since a failure
or execption can happen, in which case the symlink wouldn't be created,
and symlink are particularely useful when the task failed!
Another option would be create the symlink after the runfile is created,
and before the script is executed, but that means we need to duplicate the
code in case of Shell vs Python task.
(Bitbake rev: a672b39c5d529ba85d72eee8fef4c4273eaa5397)
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In some cases when a new machine is selected, the image combo
shows the same option. Fixed this issue, because the image
combo box should be reseted.
Fix the counter for the options in the combobox. This bug
was introduced by the templates functionality. The combo box had some
last changes, and I forgot about this counter.
[YOCTO #4858 & #5000]
(Bitbake rev: 457fd80ee6b1b2bcef463e3a83e048da2f8bf805)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In some cases, the length of the description and the brought
in by field was too big. That led to the size of the property
dialog exceeding Hob's size. For long tooltips we use
scrollable windows now.
[HOB #4321]
(Bitbake rev: 78ecabf19bf01e5a662b6e2b865cd93bf47d962b)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running scripts with 'set -e' produces silent failures with no
diagnostic. Add an exit handler which produces diagnostics, including
details of what was running if the shell seems to be bash.
(Bitbake rev: e213e6a4c297a4f1c22eed15bd7b4cbc0e9eab4f)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some labels needed to be changed in order to respect the convention.
[YOCTO #4999]
(Bitbake rev: 110b485eac6adea242297b7942da8710403c465a)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Assuming there is no known reason why an item is not provided, show
close matches on the assumption that it might have been a typo or
other mistake.
(Bitbake rev: ed81b0856b4a3892b53d39871eaaa6273390ea75)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Help to pick up mistakes such as "bitbake -c cleanstate xyz" (instead
of "bitbake -c cleansstate xyz".)
(Bitbake rev: 15c3db1cffdffd85641c6b12e77f19ce7a553472)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This should have been part of 'hob: implement the "retrieve image dialog" +
changes to image combo box' but got lost in the merge process. This adds
the missing file.
(Bitbake rev: 0eadcc073f270c0b323955cf7719b77195cf4890)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Place the "Create your own image recipe" field to the
end of the image recipes list.
[YOCTO #4193]
(Bitbake rev: 288bbda31164efffd07a370a728a7682db775c08)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob retrieves the list of recipes and packages using the IMAGE_INSTALL
variable, so a custom image should be saved using this variable.
Changed how the image is saved in a bb file
[YOCTO #4193]
(Bitbake rev: edf3f52c05d86d49b71770cdafde583213e2034d)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tha changes related to the image combo box are related to the
action done in the retrieveImageDialog. When the user wants to select
a customize image, but then he cancels the action, the combo box is set to
--select a base image--.
If the user selects an image using the new dialog, a new item with its name
is added to the combo box list and then it is activated.
[YOCTO #4193]
(Bitbake rev: f25322de7e47719b31808397174e5c4f6d8649f2)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The entire file name (with the path) is needed to know
if the image is located in the "build" directory or it comes
from layers. According to this information, the image is placed
differently in the combobox.
[YOCTO #4193]
(Bitbake rev: 7d15eccc25b6c96851e4d01401f9f9b7821730b1)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added an item for the custom images.
Added a separator in the combo box.
[YOCTO #4193]
(Bitbake rev: 1eed84c11269c25c13bb444871d84c5dfeabcb73)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Saving an image that requires another image will cause issues when
the second on is removed. So, we have agreed to "require" only the images
from layers.
The functionality is implemented in bitbake, in order to be more abstract,
and it is used by Hob when an image recipe is saved.
[YOCTO #4193]
(Bitbake rev: 28296ca78507ba2e414eb136c81afee65a8e25e5)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also, the image can be saved when the a name is filled.
[YOCTO #4193]
(Bitbake rev: 0edad0ab3ccd165125726d2aa3dfeb19dad246c9)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The image name and description should be saved for a future
save.
[YOCTO #4193]
(Bitbake rev: 6dc0fc243ac6046714523d08df4d8f88c48698cc)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was necessary to append ${TOPDIR}/recipes/images to BBFILES.
Implemented the mechanism to append a value to a variable: a command and
the method in cooker.
[YOCTO #4193]
(Bitbake rev: 4aedbee90bd92395c2460a68702e6ede00e256c9)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the image name to the list model, in order to show the image name as
the user named it.
[YOCTO #4193]
(Bitbake rev: 0aba493103d1fe50026a47db16529febbbbd77a2)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When an new image is saved, the dialog for this action has
a field for the description. Changed how an image is saved, by
appending the DESCRIPTION variable at the end of the .bb file.
[YOCTO #4193]
(Bitbake rev: 5629007f2b984005e3a8ac5d9b71422cbc2f1409)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modified generateNewImage function from cooker, in order to be used to
save a template in Hob.
Created a command to ensure that some dirs are created. The templates
(recipes) will be saved in {TOPDIR}/recipes/images folder.
Called these methods from Hob.
[YOCTO #4193]
(Bitbake rev: 96ffa00945c7eb09a0132fa47159aef3ef20fb3e)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented a new dialog used by Hob. This dialog was desinged
in order to permit to save only in a particular directory.
Also, it has a field where the user can type a description
for the image.
Implemented in the handler a method to retrieve the topdir variable,
because the changes will be saved in {topdir}/recipes/images directory.
[YOCTO #4193]
(Bitbake rev: 117d4809a62e28ffe7e9dcda5433993d76f7d934)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the design document for templates in Hob was created, we've noticed
that some labels need to change.
[YOCTO #4193]
(Bitbake rev: fcbadbb73a8a94a3d5e330e1a5fa9550130d2c62)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On the "Edit packages list" page, the image size may be computed before
building. We didn't find another way to give a more accurate size, so
we have agreed to inform the user that this an estimated size.
[YOCTO #4388]
(Bitbake rev: 136eda2dcbc32aba4f59783049352dc1375cc945)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to be easier for the user to understand, we have changed the
toolchain labels to sdk.
[YOCTO #3808]
(Bitbake rev: 008afbcf6b1b315eb5463ecfb39fc50e6303687e)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a file ends with .xz, it currently gets overwritten during unpack:
The decompress command for .xz files is:
'xz -dc %s > %s' % (file, efile)
and as efile == file, we end up overwriting file (the source).
Fix this by adding .xz to the list of suffixes that that need to
be removed from a file name for an extract command, leaving the
bare file name. Now, for a given file foo.xz,
file == foo.xz and efile == foo, similar to how .gz .bz2 and .Z
files are treated.
(Bitbake rev: 2cd2d0a48e12ab4358fb967eaf7a56c17993f48d)
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a warning if 'bitbake -C' is executed with a task that does not
exist.
Fixes [YOCTO #4877]
(Bitbake rev: 6459c1d0eb8f1007246df36149e2496ee531e25f)
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Until now the split made searching the string "file://", but
this is not ok when SSTATE_VARIABLE has the following form:
SSTATE_MIRRORS ?= "\
file://.* http://someserver.tld/share/sstate/PATH \n \
file://.* file:///some/local/dir/sstate/PATH"
In the documentation I've found that \n is the list separator.
[YOCTO #4857]
(Bitbake rev: 73bcd96928cb2df390e1fc6d3a8b7ce3e9d546a4)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can't know the dynamic pacakge's name exactly, there might be a
problem, for example, when we use:
IMAGE_INSTALL_append += "ncurses-lib12344"
The ncurses-lib12344 matches ncurses' dynamic packages pattern:
PACKAGES_DYNAMIC = "^${PN}-lib.*"
so there is no errors before the rootfs creation though there is no
ncurses-lib12344.
We can warn this, but I think that we'd better not since there are many
dynamic packages, or there would be too many warnings, for example, the
perl and kernel modules, maybe we can print a debug message for it.
[YOCTO #4798]
(Bitbake rev: df372ca057f0c8c2152223b3e26ad9a30958bab6)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modal dialogs doesn't run on the main loop so they cannot
catch any signal from the terminal. This patch makes sure
the dialogs are destroyed when a SIGINT is sent to HOB.
[YOCTO #3329]
(Bitbake rev: 6eee0cc37438cc3f91531b7df524330fba27161b)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The method was removed when the process for saving configuration
in Hob was changed. Replace the call with the right function.
[YOCTO #4793]
(Bitbake rev: b6aa2b63d71cbe82850a375381b2dbc750cf1905)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If BBPATH isn't set and bblayers.conf isn't found, improve the message
shown to the user to help their understanding of what the problem might
be.
[YOCTO #3271]
(Bitbake rev: 0e639f5cbc813c8d4719019cfdd4287e9a429610)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A
[YOCTO #4772]
When path:file change to python function, it maybe include '@' character.
So, add the special character to change to '_' for avoid error.
(Bitbake rev: 684bc6dcb11ecb1fd7a4d25c08909ad9879e8342)
Signed-off-by: Li Wang <li.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In this case, the comment is appended to the end of the file.
Some text editors, do not place a '\n' to the end of the file
after saving it.
[YOCTO #4636]
(Bitbake rev: 2beb9589b1bd9773f587b4dc08afdfe50f4ea913)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(aka pay the cookie monster for weak defaults)
If you have code like:
MYVAR = "a"
MYVAR_override ??= "b"
then MYVAR will get the value "a" even when override is in OVERRIDES. The
reason is that the value of ??= is set as a flag not a value and the cookie
monster isn't paid.
The fix is to ensure appropriate payment is made for a defaultval varflag
matching the usual setVar case.
(Bitbake rev: 3d8044bc79c482c5ea008ddf12a8128dcd1527ee)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if the flags set against a variable in the base data store
change, it doesn't automatically trigger a reparse when it really
should. For example with the blacklist class setting:
PNBLACKLIST[qemu] = "bar"
PNBLACKLIST[bash] = "foo"
will not trigger a reparse if only one entry is changed and a
blacklisted recipe can still be built.
I did consider using BB_SIGNATURE_EXCLUDE_FLAGS in here however it
doesn't make sense, we want to trigger a reparse when any of the
flags change too (which is different to the sstate signatures which
we wouldn't want to change in those cases).
[YOCTO #4627]
(Bitbake rev: ed74ea50043f6feb698c891e571feda2b9f8513d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Until now the variables were saved in bitbake configuration,
now they are saved in configuration files, in order to be read by
bitbake-worker. This helps to assure the consistency for the rest
of the variables.
(Bitbake rev: ea65ebf43525f173205183aa2fd5d8db303ffd4a)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the cooker initialization is called, the variables history is lost.
It need a reset, in order to load the configuration files.
Also, concatenated the value for INHERIT variable.
(Bitbake rev: 2b8c0c09e09ab69edc53501b84050c797f0686e4)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As it is implemented now, when parsing the configuration files is
needed, it also needs an initialization.
Also, implemented a function to create an extra configuration files
which can be used as postfile/prefiles when parsing.
(Bitbake rev: 5fe23c1b51da14f58f8c483f43f30b48766a0913)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When we reset, the current tracking value may change unexpectedly. This
patch ensures that the default value is preserved over a datastore reset.
(Bitbake rev: 0aa27598d9fdc8c3d18839b3ef93d0ba9698f761)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean up a number of old style accesses to the datastore.
(Bitbake rev: d872fef2c38749c3c6f5d84344db3ec2f9f134ce)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The command for reparse does nothing, so I have managed to remove it,
because it can be misleading. When a reparse is needed, it can be used
the parse function.
(Bitbake rev: 188eaba121789112ffeb1188f0984d23dfe8df4f)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds a new command to create an extra configuration
file, in order to create it from Hob.
Also, it calls the enable/disable data tracking when needed.
Modified the prefiles and postfiles variables because the cooker
expects some lists.
(Bitbake rev: 92393701adcfa181a1090e3632bc6df7ee7852e6)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Until now, some configuration settings was saved in a hob specific
directory. From now on, it will be saved in conf directory through bitbake.
(Bitbake rev: c53e902b010d1c3f1550f7e60e744f40120f73c2)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BB_NO_NETWORK can be set by bitbake internally by the use of
BB_FETCH_PREMIRRORONLY so update the error message to give users a
hint about this.
[YOCTO #3222]
(Bitbake rev: cac3060d0bf8c7deeacda18d06d92787911380d0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, tasks like fetchall are slightly broken since if a recipe
has specific [depends] which occur after do_fetch and add items not listed
in DEPENDS and RDEPENDS, they are not caught by recrdeptask. We've gone
around in circles on this issue (e.g
http://git.yoctoproject.org/cgit.cgi/poky/commit/bitbake/lib/bb/runqueue.py?id=5fa6036d49ed7befe6ad50ec95c61a50aec48195
) and in many cases the behaviour of recrdepends is correct but tasks like
fetchall need the other behaviour.
To address this we add a recideptask flag which can be used in conjuction
with the recrdeptask flag to specify which task to to the inspection upon.
This means entries like do_rootfs[depends] which have do_fetch tasks are
caught and run.
I'm not 100% happy with needing another flag but I don't see any rational
way to get the correct behaviour in all cases without it.
[YOCTO #4597]
(Bitbake rev: f8c9b292b02ce2c28741b74901205f5e5807ca87)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I add an option to terminate a remote server gracefully
as not to need a kill command.
(Bitbake rev: 7495f835666a9561c2c7d84da7aaa74e4df55b9a)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I add an observer only mode for the knotty UI and
the XMLRPC server that will allow the UI to register
a callback with a server in order to receive events.
The observer-UI is able to send read-only commands to the
server, and also is able to register as an event handler.
Read-only commands are the commands that do not change
the state of the server and have been marked as such in
the command module.
The observer can switch to a full client if it calls addClient
at any time, and the server has no other client running.
(Bitbake rev: 4de9ee21f1fa4d04937cc7430fb1fc8b7a8f61e2)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Interestingly the previous version comparision was broken and we were always using
the compatibility code, masking this bug. Oops.
(Bitbake rev: d48e8bcb24e8fa5d4fd60fd2c9927a95976d8d8b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now we've moved to require python 2.7.3, we can jettison the compatibility
workarounds/hacks for older python versions.
(Bitbake rev: a51c402304f2080a76720f9b31d6dfdbed393bba)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a setscene task has a hard dependency on a task like pseudo-native, its
expected that the setscene task will not run unless the dependency is met.
This adds code to ensure that is the case, otherwise a bug would show up
with a usecase like:
bitbake gnome-common
bitbake pseudo-native -c cleansstate
bitbake gnome-common -c clean
bitbake gnome-common
With the double wrapper script environment, we'd not see issues like
this as it would be masked. The problem theoretically affects code like
useradd too as well as anything using a sstate postinstall.
(Bitbake rev: c54e738e2b5dc0d8e6fd8e93b284ed96e7a83051)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
XMLRPC API ran a XMLRPC server at port+2 in order
to provide endpoints to register an event server
in which to dump the events.
This is no longer used, so we remove it.
(Bitbake rev: e171a363913a86e56266f4c9d107110c7f5221e3)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a flag to event handlers which lists the events a given handler wishes to
process. By default event handlers recieve all events but this means
we can stop running code in many cases if we know it doesn't want the event.
This is part of the fix for YOCTO #3812, but implements filtering only
for class event handlers; the other part (events filter for UIs) will be
the subject of a different patch.
(Bitbake rev: 074003a4e7530a72863b9c685fc5c31b0f08c039)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the change to bitbake-worker we need to ensure the workers know
how to contact the PR service, the magic 0 port and singleton is
no longer enough.
(Bitbake rev: c761751e259bb8e940552a28794b45887b5a72d9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We're going to need a fakeroot/pseudo version of the worker so
abstract the code to start the worker process.
(Bitbake rev: b5d0f12f9df3ab211700473ed145ee6fbd9ca8e9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The worker was being executed by each execution queue so would get
constructed twice for each build. This is wasteful so move execution
to the main runqueue so we only have to start the worker once.
(Bitbake rev: 8117f8480125b121b2b5ac0afc31b108d9e670ae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a pretty fundamental change to the way bitbake operates. It
splits out the task execution part of runqueue into a completely
separately exec'd process called bitbake-worker.
This means that the separate process has to build its own datastore and
that configuration needs to be passed from the cooker over to the
bitbake worker process.
Known issues:
* Hob is broken with this patch since it writes to the configuration
and that configuration isn't preserved in bitbake-worker.
* We create a worker for setscene, then a new worker for the main task
execution. This is wasteful but shouldn't be hard to fix.
* We probably send too much data over to bitbake-worker, need to
see if we can streamline it.
These are issues which will be followed up in subsequent patches.
This patch sets the groundwork for the removal of the double bitbake
execution for psuedo which will be in a follow on patch.
(Bitbake rev: b2e26f1db28d74f2dd9df8ab4ed3b472503b9a5c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
AUTOINC was meant to appear once at the start of the version string.
The list of names may not be sorted meaning it could get inserted in
the middle. This patch simplifies the code and ensures it appears at
the start.
Include cache version bump to ensure the cache picks up these changes.
(Bitbake rev: ad8bf10d873abb94d987860a3f6d06b134fb8a99)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Go through the cached list of file checksums and check if any of the
files no longer exist; if any are missing then invalidate the cached
recipe, which will force it to be reparsed and thus force the list of
files to be collected again. This prevents a warning when moving a file
to a different location that is still picked up by the recipe, e.g.
moving a file from a "files" subdirectory to one named with the recipe
name (${BPN}).
Fixes [YOCTO #4474].
(Bitbake rev: e1aa103593c46612c4d9000524174983b5994dc9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The reasons for combining these objects is ancient history, it makes
sense to clean things up and separate them out now. This follows on
logically from the configuration cleansups and leads well into the
bitbake-worker changes.
(Bitbake rev: 89ffd62661ebcf2a97ce0c8dfd5e4d5bfbe27de7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch enables the XMLRPC server to remain
resident in memory after a task is run, and to accept
a new controlling client. To check the server after
task completion, do
lsof bitbake.lock
in the build directory. Kill the server with kill.
(Bitbake rev: e823e1f0675ff3794eb39ef0b4df2d7a220f4013)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In an attempt to minimize code duplication, create
clear interfaces, and maximize code reuse through OOP,
bb.server adds base classes for the BitBakeServer,
BitBakeServerConnection and actual server implementations
instructed in particular server types.
These classes document the minimum interfaces that the
derived classes must implement, and provide boilerplate code.
Changes to None, Process and XMLRPC servers as to use
the common server infrastructure.
(Bitbake rev: 6db4a64cef20f8d0aba804db4c4e1eec7b112b46)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added distroy signal to information dialogs
so that when pressing the close button,
the dialog would close.
[HOB #4568]
(Bitbake rev: 265e27857d1d8914486b924d3390bfbe88f4e39b)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some apparently debugging was left in in a previous commit. This caused
bitbake to return a list of bbappends when things changed from the cache.
Make this a proper debug message.
(Bitbake rev: 1965e5cbdfede18d7b7cb0218e0a5147c3f1c884)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added code in XMLRPC server that creates a stub local server
for a client-only connection and is able to connect to
a remote server, and receive events from the remote server.
Added the option to start a client with a remote server in
bitbake.
Original code by Bogdan Marinescu <bogdan.a.marinescu@intel.com>
(Bitbake rev: 25b2af76104d5aaf6435de8c158e0407512f97ce)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to be able to identify different clients over a
stateless XMLRPC connection, we add a custom header named
Bitbake-token, which identifies each client.
We refactor the rest of the code to use the new transport.
Based on a patch by Bogdan Marinescu <bogdan.a.marinescu@intel.com>
(Bitbake rev: a00c2186bffe848a7cedf31969b904f8f7322ae6)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The collection of the extra caching data should not
be performed by the cooker, but supplied to it.
This patch will also streamline the code for launching servers
without a UI attached.
Based on a patch by Bogdan Marinescu <bogdan.a.marinescu@intel.com>
(Bitbake rev: f0b54280a6bce522508e4741e5f507bc284113a8)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the removal of the none server type, we can remove the launchUI
method and simplify the code slightly.
(Bitbake rev: 9bef2f2dd0bcaa59528ebcb3c1ce053b7dff1ec6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The process server backend has been serving well as the default for a long
time now and the UI model is much better thought out that it used to be. With
the move to make bitbake a memory resident process, the none server is now
looking rather pointless and complicates the code needlessly. Lets therefore
now remove it.
(Bitbake rev: 9af03a89605e3db9bce3cea1e0f2d0b6cfaa6fe1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The init function call was clobbering data hob relies on injecting, fix
this so the data injected by hob isn't overwritten.
(Bitbake rev: 64ca1aa1fd5f0473196b6cd805637fa644a92173)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "see xxx for further information" is misleading since it is just
the same information. Clarify just to mention the that this is the location
of the logfile without any empty promise.
[YOCTO #4343]
(Bitbake rev: 7088c0e8553dd3c408b5bc06f8c34d5b72e9ea9a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Originally it seemed like a good idea to keep the parameters around. Having
seen this in real life use, its incorrect, we should pull all the data we need
into the cooker's configuguration and then use this to build the datastore.
Being able to just build the datastore from the parameters seemed like a good
idea but having a dummy cooker configuration object is now looking like
the better option.
This also fixes failures in hob since the parseFiles command can call
into cooker directly now and reset the configuration prefiles and postfiles
at will, rather than the indirect calls before which were breaking the datastore
(e.g. BBPATH wasn't set).
The cleanup this allows in tinfoil illustrates how this change makes more sense.
(Bitbake rev: f50df5b891bf318f12fc61c74adfcc626cc6f836)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The assignment to True was missing from the code, well spotted Saul!
(Bitbake rev: e493fe8cb4953935f01361ffc0240e5818ebb283)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similarly to the execution context changes, establish better lifetime
management API of the class event handlers.
(Bitbake rev: 54e35a6cceead9521f8b1dacd48e55064e85c8bd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current execution context management for bitbake is ugly and the
use of a global variable is nasty. Fixing that is hard, however we
can improve things to start to establish an API for accessing
and changing that context.
This patch also adds in an explicit reset of the context when we reparse
the configuration data which starts to improve the lifecycle of the data
in setups like hob.
(Bitbake rev: 6c3281a140125337fc75783973485e16785d05a1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These have long since been deprecated, lets remove them.
(Bitbake rev: 3dc83bbb1bf387bb7ecea2e17f0f72cfccecba92)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its confusing when an event handler in for example a bbclass receives
events for a recipe which doesn't use the class. This is due to the
class event handlers having confusing scope. Worse, the issue is not
deterministic and the events a handler will see depends on the parse
order.
To avoid these issues, remove the class event handler global scope
and only have class handlers recieve events for recipes using the
class.
(Bitbake rev: 7fb95f3d133e440d463d2faa7151c731f8e1ae96)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Having a global method scope confuses users and with the introduction
of parallel parsing, its not even possible to correctly detect conflicting
functions. Rather than try and fix that, its simpler to retire the global
method scope and restrict functions to those locations they're defined
within. This is more what users actually expect too.
If we remove the global function scope, the need for methodpool is reduced
to the point we may as well retire it. There is some small loss of caching
of parsed functions but timing measurements so the impact to be neglibile
in the overall parsing time.
(Bitbake rev: 4d50690489ee8dc329a9b0c7bc4ceb29b71e95e9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When this error occurs, the build should stop, not continue uninterrupted.
[YOCTO #4460]
(Bitbake rev: acd6d7ffa8813b3b11cad9145e8e614a695ae04a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After a recipe/package is deselected, the table is sorted as before the
fadeout animation.
[YOCTO #4453]
(Bitbake rev: d4968eac539f777367ab1243a1049117cb261176)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-applied a fade out mechanism for deselctiong on all the tabs of
recipes and packages list page
-set cursor on the package/recipe when it is included(important
when the its place is changing; like when the tree si order by
included tab)
[YOCTO #4342]
(Bitbake rev: 8bd0e0681a6a39c00accbfc0041ab248993f3877)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We use this externally in the OE layer index update script, so it
shouldn't really be named as an internal function.
(Bitbake rev: 89332a7874e94c8d91ea24200f9739abb1a50397)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix the code here for recent changes to the initialisation of
configuration objects for cooker.
(Bitbake rev: 9d3ca9aa73a448b0594f03ac8e8317403ec0dc8d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means the variables show up in the shell execution "run" files since
its useful to know what the fakeroot environment is and how to set it up
manually.
(Bitbake rev: bdf437747b664479acde6deaa9096e2a6bcdf483)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the code stands today its hard to know which configuration variables
are used by which parts of the system. Some are used by the UIs, some
by bin/bitbake itself, some by cooker.
This patch changes the configuration to just contain the variables cooker
uses, and changes bin/bitbake to access the variables it needs directly
which hopefully lets us start to untangle this mess.
(Bitbake rev: e57497a24b6157c92519a34accd66035a39ad1f8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to have a memory resident bitbake and to allow task execution, we need
to be able to rebuild the base configuration without a cooker. This moves the
code into its own class so it can be built independently.
The interface is less than ideal here but I didn't want to add parsing methods
a subclassed DataSmart, at least until we've experimented further with this code
and are certain that makes sense. At the very least, the methods are ugly and need
cleaning up. Spliting the code out seems to be the right thing to do though and
should unblock various activities on BitBake so I believe this code is a step in
the right direction.
Based on a patch from Alexandru Damian <alexandru.damian@intel.com>
(Bitbake rev: 22a0b3cf73d2689db0c118b37aa7492632f8b0a7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building up a set of actions for the server is tricky since we depend upon the
commandline but fall back to values from the datastore. We should be able to build
a datastore without a commandline and vice versa. Ultimately the UI should send
the commands to the server.
This patch amounts to code rearranging, moving the heavy lifting to the UI, though
a helper in the configuration option. This will need further cleanup/tweaking but
this should be the only update needed to the UIs. The code now queries the server
for any missing data should it need to.
This code allows various knowledge of configuration variables to move to the UI side
only, partcularly pkgs_to_build but also all the command specifiers. It should also
be possible to move cmd eventually, I'm just unsure if any callers call the commands
expecting this to default to something sane right now.
(Bitbake rev: 2dbbb1d51dafd4451fef8fe16f095bcd4b8f1177)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the UI and server configuration is one big incestuous mess. To
start to untangle this we creater cookerdata, a new module which contains
various confiuration modules and the code for building the base datastore.
To start with we add a ConfigParameters() class which contains information
about both the commandline configuration and the original environment.
The CookerConfiguration class is created to contain the cooker.configuration
options. This means we can transfer new paramters to the server over something
like XMLRPC and then build a new configuration from these on the server.
Based on a patch from Alexandru Damian <alexandru.damian@intel.com>
(Bitbake rev: 35bd5997e8d8e74bc36019030cc10c560a8134f9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The long srcrevs are mainly used or the workdir construction as well as
the package version. The long entries are hashes generated by the git fetcher
and other scms using a similar revision mechanism.
We need these to change when the package changes however collisions are
unlikely to happen within the domains we care about. The long revisions
have generated negative user feedback due to the use in path and file
names.
This patch therefore truncates the revisions to 10 characters maximum.
This should be safe in the contexts where these revisions are used as
the chances of spatially close collisions is very low (distant
collisions are not a major issue in the way we use these).
(Bitbake rev: 43a8319cda7fae37862dae323eeb24cb39ca21b7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now we no longer try and provide increasing values from the fetcher,
we can simplify the function structure for the sortable_revision
pieces and move the AUTOINC handling directly into the function
which needs it, simplifying the code.
(Bitbake rev: fb068bee47bb1a06f02447daf16c2b2a79c03288)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we account of the top level function's vardeps but not
those of any subfunction. This would imply we'd have to manually
write the dependencies of all parent functions which would be crazy.
This patch adds the dependencies to fix the issue.
(Bitbake rev: 658008cc6a8acd5c1f26877c9444c96002db01e7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The skipIf decorator is unavailable under python 2.6 and finding a syntax
works there is hard. This patch does allow network tests under 2.6.
(Bitbake rev: 565b3e31e0226c6e193ee0b031bd5e7bef25591e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move various random imports to the start of the modules as cleanup
and avoid an import issue with bb.process on python 2.6.
(Bitbake rev: aed4adfbe3a591ca4f8e41fb763c9f961bf2e6d5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the fetch tests fail on python 2.6 since check_output
doesn't exist on this version of python. Use bb.process instead
to avoid this problem.
(Bitbake rev: a3637155e829e06bbfe50fb8753de3de7ee8c22e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Contains a small fix to the builder.py code
(a missing "self" in a variable assignment).
With this changes, "hob" can run with the XMLRPC backend:
$ hob -t xmlrpc
(Bitbake rev: 3497478f803986af32099ddd124c47df8e89f6da)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"status" is a relic of very early versions of bitbake, rename it to match what it now
means.
(Bitbake rev: db307fc68773868de2db614a061f51c5c6a90468)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
updateCache() gets called by command.py when needed and needs to be iterated
over. The calls in cooker.py are therefore just plain wrong/confusing now.
(Bitbake rev: 8b7c65bba466bb6773c56849074978ce2c956129)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its clear looking at the code the path argument has never been used and doesn't
work. Tweak the function to be a little more readable.
(Bitbake rev: d7047ceaf29b870ade3257e263e010f65aa8bc6e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Cooker class is too large and needs to be split up into different
functional units. Splitting out the collections code into its own class
seems like a good place to start to try and disentangle things.
(Bitbake rev: ca1fcbb6e214c155a05328779d3d326e10c5eac0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the shell lexer finds an unrecognized dollar token, the error
message should contain what kind of token it is having problems with.
(Bitbake rev: 1acb9c338018c612db519d2db823c66b567863b9)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After the image was build, update the image size in the packagelistpage.
[YOCTO #4388]
(Bitbake rev: 4d6d02e61b32d1d710c708774f08cc5e7764415d)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the "cancel" callback function for both recipes and packages
list page.
[YOCTO #4333]
(Bitbake rev: 05ebbaa2426716c6254c4a98872020d02d2944bd)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When you search a string, there are 2 groups: recipes/packages starting
with that string, and the rest. These 2 groups are now sorted.
[YOCTO #4111]
(Bitbake rev: 8d2b2a1c97570d3c6b40727f1afa1db8c00882f9)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated information for "Additional free space" and
"Image basic size" to match the description in the
manual.
[HOB #4354]
[HOB #4355]
(Bitbake rev: d3eac3f104689137c071c91a343ca4558b9d9f17)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is clearly a missing parameter from this error message, add it.
(Bitbake rev: d98be5ea69b99fb7934fc3093422f139bc37a1cc)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This lambda function is equivalent to the default sort used by sorted,
so we can simply remove this. The syntax isn't compatible with python 3.
(Bitbake rev: da8550fc884596222daa3f8794dce1abd01e5612)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The <> operator is deprecated, replace with !=.
(Bitbake rev: 4a43e58dd97ec6ea304eaa727c030973a5bc91b7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Python 3 is stricter about how files are accessed. Specficially:
* Use open(), not file()
* Use binary mode for binary files (when checksumming)
* Use with statements to ensure files get closed
* Add missing file close statements
(Bitbake rev: 9f08b901375ba640f47596f1bcf43f98a931550f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* with read-only PREMIRROR (e.g. mounted over NFS or CIFS
and referenced as file:///mnt/premirror) we cannot use
BB_GENERATE_MIRROR_TARBALLS because all git2_abc.git.tar.gz
files later became just symlinks to read-only location in PREMIRROR
(it works fine on first build and for new components, because
at that time there isn't tarball on PREMIRROR yet).
ERROR: Fetcher failure: Fetch command failed with exit code 141, output:
tar (child): /build/downloads/git2_abc.git.tar.gz: Cannot open: Read-only file system
tar (child): Error is not recoverable: exiting now
(Bitbake rev: 3627b02f77c78beedadadd77c619b9e5edaae076)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similarly to the better_exec improvements, improve the compile failure
messages to be more user readable.
(Bitbake rev: 9bc92d0210e13e4cc98727f6c9ec2f47c2221e77)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current bitbake tracebacks are hard to read/confusing and sometimes
incomplete. This patch attempts to do better by:
* Moving the note about the exact exception to the end to make things
read in sequence
* Merged the initial stack trace to become part of the code dump
* Added handling for "/xxxx" file paths since we can load these files
and include the data as part of the trace
* Dropped the ERROR: prefix to every line, allowing the error messages to
be spacially accosicated in the UIs
* Moved the "From:" line to the top of each code block and ensured its present
consistently
With the complexity now in this funciton, I've added try/except wrapping around
it to ensure we catch exceptions in the exception handler too.
Example before:
"""
ERROR: Error executing a python function in /media/build1/poky/meta/recipes-core/eglibc/eglibc-initial_2.17.bb:
TypeError: 'filter' object is not subscriptable
ERROR: The stack trace of python calls that resulted in this exception/failure was:
ERROR: File "do_populate_lic", line 13, in <module>
ERROR:
ERROR: File "do_populate_lic", line 6, in do_populate_lic
ERROR:
ERROR: File "license.bbclass", line 99, in find_license_files
ERROR:
ERROR: File "/media/build1/poky/meta/lib/oe/license.py", line 38, in visit_string
ERROR: if pos > 0 and license_pattern.match(elements[pos-1]):
ERROR:
ERROR: The code that was being executed was:
ERROR: 0009: destdir = os.path.join(d.getVar('LICSSTATEDIR', True), d.getVar('PN', True))
ERROR: 0010: copy_license_files(lic_files_paths, destdir)
ERROR: 0011:
ERROR: 0012:
ERROR: *** 0013:do_populate_lic(d)
ERROR: 0014:
ERROR: [From file: 'do_populate_lic', lineno: 13, function: <module>]
ERROR: 0002:def do_populate_lic(d):
ERROR: 0003: """
ERROR: 0004: Populate LICENSE_DIRECTORY with licenses.
ERROR: 0005: """
ERROR: *** 0006: lic_files_paths = find_license_files(d)
ERROR: 0007:
ERROR: 0008: # The base directory we wrangle licenses to
ERROR: 0009: destdir = os.path.join(d.getVar('LICSSTATEDIR', True), d.getVar('PN', True))
ERROR: 0010: copy_license_files(lic_files_paths, destdir)
ERROR: [From file: 'do_populate_lic', lineno: 6, function: do_populate_lic]
ERROR: 0095: lic_files_paths.append((os.path.basename(path), srclicfile))
ERROR: 0096:
ERROR: 0097: v = FindVisitor()
ERROR: 0098: try:
ERROR: *** 0099: v.visit_string(license_types)
ERROR: 0100: except oe.license.InvalidLicense as exc:
ERROR: 0101: bb.fatal('%s: %s' % (d.getVar('PF', True), exc))
ERROR: 0102: except SyntaxError:
ERROR: 0103: bb.warn("%s: Failed to parse it's LICENSE field." % (d.getVar('PF', True)))
ERROR: [From file: 'license.bbclass', lineno: 99, function: find_license_files]
ERROR: Function failed: do_populate_lic
ERROR: Logfile of failure stored in: /media/build1/poky/build/tmp/work/i586-poky-linux/eglibc-initial/2.17-r3/temp/log.do_populate_lic.17442
"""
Example after:
"""
ERROR: Error executing a python function in /media/build1/poky/meta/recipes-core/eglibc/eglibc-initial_2.17.bb:
The stack trace of python calls that resulted in this exception/failure was:
File: 'do_populate_lic', lineno: 13, function: <module>
0009: destdir = os.path.join(d.getVar('LICSSTATEDIR', True), d.getVar('PN', True))
0010: copy_license_files(lic_files_paths, destdir)
0011:
0012:
*** 0013:do_populate_lic(d)
0014:
File: 'do_populate_lic', lineno: 6, function: do_populate_lic
0002:def do_populate_lic(d):
0003: """
0004: Populate LICENSE_DIRECTORY with licenses.
0005: """
*** 0006: lic_files_paths = find_license_files(d)
0007:
0008: # The base directory we wrangle licenses to
0009: destdir = os.path.join(d.getVar('LICSSTATEDIR', True), d.getVar('PN', True))
0010: copy_license_files(lic_files_paths, destdir)
File: 'license.bbclass', lineno: 99, function: find_license_files
0095: lic_files_paths.append((os.path.basename(path), srclicfile))
0096:
0097: v = FindVisitor()
0098: try:
*** 0099: v.visit_string(license_types)
0100: except oe.license.InvalidLicense as exc:
0101: bb.fatal('%s: %s' % (d.getVar('PF', True), exc))
0102: except SyntaxError:
0103: bb.warn("%s: Failed to parse it's LICENSE field." % (d.getVar('PF', True)))
File: '/media/build1/poky/meta/lib/oe/license.py', lineno: 38, function: visit_string
0034: new_elements = []
0035: elements = filter(lambda x: x.strip(), license_operator.split(licensestr))
0036: for pos, element in enumerate(elements):
0037: if license_pattern.match(element):
*** 0038: if pos > 0 and license_pattern.match(elements[pos-1]):
0039: new_elements.append('&')
0040: element = '"' + element + '"'
0041: elif not license_operator.match(element):
0042: raise InvalidLicense(element)
Exception: TypeError: 'filter' object is not subscriptable
ERROR: Function failed: do_populate_lic
ERROR: Logfile of failure stored in: /media/build1/poky/build/tmp/work/i586-poky-linux/eglibc-initial/2.17-r3/temp/log.do_populate_lic.3275
ERROR: Task 9 (/media/build1/poky/meta/recipes-core/eglibc/eglibc-initial_2.17.bb, do_populate_lic) failed with exit code '1
"""
(Bitbake rev: c5de66b870406d9bd1161a9b7e2b04fe6eb065fe)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Take __BBTASKS, __BBHANDLERS and __BBANONFUNCS into account when
computing the configuration hash.
[YOCTO #4447]
(Bitbake rev: 260ced7452405fc43ce3d9dd6798236aa07cc716)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current if the PR Service fails to start, bitbake carries on regardless or
hangs with no error message. This adds an exception and then handles it correctly
so the UIs correctly handle the error and exit cleanly.
[YOCTO #4010]
(Bitbake rev: 949c01228a977c3b92bfc0802f6c71b40d8e05b3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runCommand was returning 'error' but checking for 'err'
resulting in an exception.
(Bitbake rev: 263aa44ed47e0cb03e1a97e7ed4a50bd9f828c78)
Signed-off-by: Martin Donnelly <martin.donnelly@ge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BitBake commit 7c568132c54a21161de28907159f902462f1e2bb resulted in a
fairly serious performance regression during parsing, almost doubling
the time taken to do a full parse and almost certainly impacting
performance during building. The expandKeys function is called
frequently, and if we avoid using keys() and instead just use the normal
variable lookup mechanism, performance is restored.
(Bitbake rev: 034b392e9877309f15940b258fc2c16f16fb40b5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this can be useful when someone wan't to compare old file with
bad checksum and new one
(Bitbake rev: 33c6b93597dd43ab03ce7b62ba3eeb1893a68c38)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-refine sorting functions for each column from recipe list page
and package list page
-sort correctly size column from packages list page
-set default sroting order and secondary sorting criteria
-make included on included recipes/packages no sortable
[YOCTO #2346 & #4194]
(Bitbake rev: 56822176e3d5e613654a46c983d2f979d7a9eebc)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The btrfs doesn't have static inode, so disable the inode check for it,
the previouse patch has set it:
minInode = None
But this is incorrect, the minInode is just a temporary variable, it
should be:
self.devDict[k][2] = None
[YOCTO #3609]
(Bitbake rev: 7e45149c292bc92314af9b42962fde8f603a179f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When two variables are defined as:
${var} = "bar"
foo = "foobar"
The value of 'foo' when ${var} == foo becomes indeterminate. We
want to warn a user when this situation has been encountered so they
can take corrective actions.
In the above example usually foo == bar, unless multilibs are enabled.
Then ml-foo = "ml-foobar".
(Bitbake rev: 7c568132c54a21161de28907159f902462f1e2bb)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- do not set the Images window to always display a scroll bar if it is not needed
[Yocto #4171]
(Bitbake rev: 970e2e6f079fa9a49646f86364eae9a4ee241f90)
Signed-off-by: Ioana Grigoropol <ioanax.grigoropol@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of a custom git proxy mechanism, Hob now
uses a SOCKS proxy in order to work with external
repos via the oe-git-proxy helper script.
Fixes [YOCTO #4187]
(Bitbake rev: 0b81a2c4a5611b64dbdd40131730a82c149b94a2)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Cristian Iorga <ubik3000@gmail.com>
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After moving the code from packageinfo.bbclass to
package.bbclass, minor adjustments were made to the
parsing of the package items.
(Bitbake rev: 414fe98fe367ba44ea0fd20d8fe1296bcef58ea6)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Giving focus to the search text field should not impact the table
sorting.
[YOCTO #4113]
(Bitbake rev: b5b4b6e4fefa6a164a49b291a0993b1ff63947f4)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the functionality which made an information
dialog pop up when including any package.
[HOB #4138]
(Bitbake rev: 6cabbb241ab3959b3c8f084423469c0bfc9899bd)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With this change, you can opt-out to skip unit tests that require an
internet connection. To opt-out, you'll set the environment variable
BB_SKIP_NETTESTS to 'yes'.
(Bitbake rev: 9ff5f172096a4f51b6b085307506473405dc4f59)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now, the search results stay until I clear the search field,
so that I can manipulate the search results.
[YOCTO #4112 & #4117]
(Bitbake rev: d880ce966ca825aa66a23755fcb47497fb3f26c3)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to have information for each package in hob,
a new item is added to the dictionary, represeting the
files that are brought in by each package.
(Bitbake rev: ffb8e32166d0ab690131e753f91592011c3f7ffb)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new column to the model and also populating
it with the information brought in from the
packageinfo.bbclass.
(Bitbake rev: afa78ae15be3e0babadd5d86092a2852135cfcce)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extended the packages page information with the
listing of the files brought in by every package.
(Bitbake rev: 42b1ce37b5c9a357108afdc01b0e9f008a84e6e3)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
So that the information added to cache_extra could
be accesed by hob, new variables were added in
the cooker.py.
(Bitbake rev: f2d5f4ca9ac82599c74838844f7e54e481e023d3)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new variable to cache_extra so that
the files brought in by a package can be
displayed in hob.
(Bitbake rev: 94e2f899457d6565442a933529dd3db261ab12f0)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds very basic git submodule support to the fetcher. It can be
used by replacing a git:// url prefix with a gitsm:// prefix, otherwise
behaviour is the same as the git fetcher. Whilst this code should be
functional, its not as efficient as the usual git fetcher due to the
need to checkout the tree to fetch/update the submodule information. git
doesn't support submodule operations on the bare clones the standard git
fetcher uses which is also problematic.
This code does however give a starting point to people wanting to use
submodules.
(Bitbake rev: 25e0b0bc50114f1fbf955de23cc0c96f5f7a41e3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[Hob #4070]
- tweaked the spacing on info windows
- fixed text bolding in simple settings dialog
(Bitbake rev: 2ecb102968cdbbdbbfa91e1dcccf45bcd0b59a89)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented the search functionality for recipes and packages using
filters on the listmodel. I have used the design which can be found in
bugzilla.
[YOCTO #3529]
(Bitbake rev: b77166ad7b8571895f73a84f7789d93fbd4f6d04)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For a custom image from scratch, the image version is not set and
it gives an error.
[YOCTO #4065]
(Bitbake rev: 43703f3eb5f71a117e6315fa5df91711653636a3)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* dep variable was removed in
commit 3190cb83e2af195a464f669c5aa8aedbf795160e
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Wed Jun 27 11:04:06 2012 +0100
taskdata: Add gettask_id_fromfnid helper function
This is like gettask_id but doesn't require translation of fnid -> fn
first which the function then translates back. This gives a sizeable
performance improvement since a significant number of lookups are avoided.
* now it fails completely instead of showing which task is missing
(Bitbake rev: 58847fabd389e5b8d02d5a9c6827aabedb30312f)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some settings in Hob were not saved in Bitbake and they were not displayed
correcty in Hob, because Hob used some other variables with the extension "_HOB".
I have removed this, in order to have a consistency for the variables.
ALso, I called a function to load the extra variables saved in .hob/template_default.hob.
[YOCTO #3957]
(Bitbake rev: 0f62a12ef3fa4daf8f3a289c984115302b75c23d)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The BB_ENV_WHITELIST doesn't work well and flushes BB_ENV_EXTRAWHITE,
here is an example:
$ export BB_ENV_WHITELIST
$ export BB_NUMBER_THREADS=10 (or other value)
Edit conf/local.conf, change "BB_NUMBER_THREADS =" to "BB_NUMBER_THREADS ?="
$ bitbake -e | grep '^BB_NUMBER_THREADS ='
we will notice that BB_NUMBER_THREADS' value doesn't change, though
BB_NUMBER_THREADS in both BB_ENV_WHITELIST and BB_ENV_EXTRAWHITE.
This is because the "approved" inside the function approved_variables
doesn't include BB_ENV_WHITELIST or BB_ENV_EXTRAWHITE when
BB_ENV_WHITELIST is set (they are incuded by preserved_envvars()), so
the BB_ENV_WHITELIST and BB_ENV_EXTRAWHITE will be removed from the env
in the first call from bin/bitbake, and when it is called again by
cooker.py, their value will be None, then the vars inside them will be
removed from the env.
Add BB_ENV_WHITELIST and BB_ENV_EXTRAWHITE to the "approved" would fix
the problem.
[YOCTO #4031]
(Bitbake rev: d2b07e6516dd308d0045a7fdb72b588af9d676ad)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous monitor is based on the disk, and one disk only can have
one action, this limits its function, for example we set this in the
current local.conf:
BB_DISKMON_DIRS = "\
STOPTASKS,${TMPDIR},1G,100K \
STOPTASKS,${DL_DIR},1G,100K \
STOPTASKS,${SSTATE_DIR},1G,100K \
ABORT,${TMPDIR},100M,1K \
ABORT,${DL_DIR},100M,1K \
ABORT,${SSTATE_DIR},100GM,1K"
Before:
* If TMPDIR, DL_DIR and SSTATE_DIR are on the same disk partition,
only the last line "ABORT,${SSTATE_DIR},100GM,1K" works
* If TMPDIR, DL_DIR and SSTATE_DIR are on the different disk partitions,
only the last three lines (ABORT) work.
These are not what we expect, now:
* We monitor the disk based on the path and action, so all the six lines
will work no matter whether they are on the same disk partition or
not.
* The out put format will be:
WARNING: The free space of /path/to/directory (device) is running low (XXGB left)
[YOCTO #3995]
(Bitbake rev: e22a576672ee4a40b44f7a826a78a77fc07e9177)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
" tabs and passing the information needed to the function created
in the builder.
(Bitbake rev: 60c3b561d66f9a43e696c402899141287ddb496e)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
and passing the information needed to the function created in the builder.
(Bitbake rev: 840bbdbc973e72d4305c21bcc26c008a6dc39456)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in the information dialogs.
(Bitbake rev: 0301e7622af83c105ba60d7d1749294de06f6a59)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
in order to display all the information gathered in the
backend, new columns needed to be added in the hoblistmodel.
(Bitbake rev: 0942f05a1196513c6d163f28cf297728aed6ee22)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
added information so that it would display correctly in the information dialogs.
(Bitbake rev: bf86cc183c250acd0e52755ae6050a2f8d85ccf5)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this covers functionality for : recipe selection page
package selection page
information dialogs
(Bitbake rev: 82cb844c92fcc71cefe7d7ddc110523c62185e9e)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
added information so that it would display
correctly in the information dialogs.
(Bitbake rev: 7580716b905366aea70c9eed38dc703cecf24219)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
replaced in the builder.py the function that displayed the tooltips
with two functions that display property windows for recipes and packages
pages.
(Bitbake rev: bec3c1dc91118705149d00e5ec2bea08c8db75ed)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-extended cooker.py so that the extra information in cache_extra.py could
be used
(Bitbake rev: e6c2fa2f6669a4adf890a2ee794b100617223b7b)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- in order to have the information needed in the property
windows, cache_extra.py was extended with variables.
(Bitbake rev: bc09090f44f9b3a1b123f5453586295b9623218b)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reverting the pool changes, terminate does not work reliably on
bb.compat.Pool :(
[YOCTO #3978]
This reverts commit 8af519a49a3374bd9004864ef31ca8aa328e9f34.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reverting the pool changes, terminate does not work reliably on
bb.compat.Pool :(
This reverts commit 9ca8e513dc142dd7aefadeb6db2ccdb00f38b39f.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* without this change it's hard to see what's changed:
bitbake-diffsigs sstate-cache/*/sstate-depmodwrapper-cross-cortexa8-vfp-neon-oe-linux-gnueabi-1.0-r0-cortexa8-vfp-neon-*_populate-sysroot.tgz.siginfo
basehash changed from 62f28c13172d38af917716d6d4b15ac5 to 9cf38842bcc79e0a4356856a64141548
Variable TUNE_CCARGS value changed from -march=armv7-a -mthumb -mthumb-interwork -mfloat-abi=softfp -mfpu=neon -mtune=cortex-a8 to -march=armv7-a -mthumb -mthumb-interwork -mfloat-abi=softfp -mfpu=neon -mtune=cortex-a8
Hash for dependent task depmodwrapper-cross_1.0.bb.do_install changed from 4494cb6c117309a9b4c541ad86c0aac5 to 1e3bcf2d14e5bd30a38350b41bb98db3
* with this change, we can see extra trailing space in first version:
basehash changed from 62f28c13172d38af917716d6d4b15ac5 to 9cf38842bcc79e0a4356856a64141548
Variable TUNE_CCARGS value changed from ' -march=armv7-a -mthumb -mthumb-interwork -mfloat-abi=softfp -mfpu=neon -mtune=cortex-a8 ' to ' -march=armv7-a -mthumb -mthumb-interwork -mfloat-abi=softfp -mfpu=neon -mtune=cortex-a8'
Hash for dependent task depmodwrapper-cross_1.0.bb.do_install changed from 4494cb6c117309a9b4c541ad86c0aac5 to 1e3bcf2d14e5bd30a38350b41bb98db3
(Bitbake rev: 7d85b1a383feaa072503d71d3baeb3bdcd1012a8)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Multiprocessing catches these and handles passing them between processes
itself, we don't need to do it ourselves anymore.
[YOCTO #3926]
(Bitbake rev: 9ca8e513dc142dd7aefadeb6db2ccdb00f38b39f)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bb.process.run() will return one tuple, e.g:
p4file = ('strA\nStrB\nstrC\n'), then there will be an iteration on p4file:
for i in p4file:
[snip]
The i will be 's t r A ...', this is incorrect. use splitlines() to fix
the problem.
[YOCTO #3619]
(Bitbake rev: b7440fb36b419996046f607e66434ce34722272b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The stamp cleaning process that occurs before writing out new stamps for
a task was deleting taint files as well. This resulted in tasks that
were forcibly re-executed using the -f or -C command line options to
have their previous output restored from shared state when called upon a
second time, because the taint value was no longer incorporated into the
task signature and thus it was reverting to its previous value. This
also affected the kernel menuconfig command in OE-Core.
Note that the taint file *is* still deleted when doing -c clean, which
is the desired behaviour.
Fixes [YOCTO #3919].
(Bitbake rev: e6db0ee31178d4386802e720d75303ec7dc21519)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 21fe2683aefde10e847e66c11c26d4f4c1e07cfd
since bitbake-selftest doesn't pass when this is applied and
we're seeing multiple build failures from this change.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve the remove function to better handle cases where path contains
special shell chars like whitespaces, '$', ';' or'\'.
Thanks to Enrico Scholz for the fix.
(Bitbake rev: 617511c9f86cc4ef52457653c8adff582d94bce3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If there there isn't a subdirectory to the downloadfilename, this was
failing. This patch avoids that issue.
(Bitbake rev: 58bfd8d88495d4cae808e23b7af40e65ad05450f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fetcher differs from the SSH fetcher in that it adheres more
strictly to the SECSH URI internet draft --- it uses the sftp://
instead of the ssh:// scheme, and it uses sftp instead of scp.
(Bitbake rev: d240baeb7a4107d2eba3f08c411c0f086674d8e2)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A class representing a generic URI, with methods for accessing the URI
components, and stringifies to the URI. This class should be a bit more
flexible than the existing {encode,decode}_url functions in that it
supports more components (e.g. port) and that it does not rely on a
specific order on the return values. This makes it easy to add new
properties without affecting the API.
(Bitbake rev: bd824da8a7eafe27310e410807319628378caeca)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Whilst shutils.rmtree() is pythonic, its also slow. Its faster to
use rm -rf which makes optimial use of the right syscalls.
(Bitbake rev: 96088ebdec08e49ba9e8dbcac437bfcdc21f5983)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Hob templates functionality, in its current incarnation,
is confusing and has no clear utility.
[YOCTO #3696]
(Bitbake rev: 4eb3b6bb9f936808ddf085624078f6479c522c48)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is an error:
ERROR: No new tasks can be excuted since the disk space monitor action
is "STOPTASKS"!
ERROR: Unknown event: <bb.event.DiskFull object at 0x2ab6310>
This is because we don't handle the event bb.event.DiskFull in
knotty.py, we don't want the knotty to do anything here since we have
done everything in monitordisk.py, so just ignore this event would fix
the problem.
[YOCTO #3523]
(Bitbake rev: 0fa874dbe0532bbe88ade405f514a237e6cd2488)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the machine is changed, the warnings list is emptied and the warnings
bar is hidden.
[YOCTO #3830]
(Bitbake rev: 8e43da7798a98988f7da3f7c424e8f9e5eac2010)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hob was hanging when the user tried a rebuild a new image, because
of sanity checks. It should not re-run sanity checks.
[YOCTO #3829]
(Bitbake rev: f7ff550f53cf3e5b166940db83f27ec733f3ef72)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is an error when use disk monitor on btrfs:
WARNING: The free inode of rootfs is running low (0.000K left)
ERROR: Immediately abort since the disk space monitor action is "ABORT"!
This is beucase some fs formats' statvfs.f_files (inodes) is zero, thus
the statvfs.f_favail (free inodes) is zero, too, this a feature of the
fs, we disable the inode checking for such a fs.
[YOCTO #3609]
(Bitbake rev: b2ada3ad5f7aefff107f013e0c9decea481c7ef6)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently stamps end up at the top level of DL_DIR even if the files
themselves are in a directory structure. This patch preserves path
components allowing the top level directory to be less populated
which is an advantage for large sstate caches.
(Bitbake rev: 59921ce3ed7a4c0b7f8ef1a101ad9127469bf1fd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I've sent a patch to poky, with some changes in sanity.bbclass. When bblayers.conf
is updated, it updates also a variable to know when to reparse configuration files.
This patch contains the changes to reparse conf files, after a sanity check which
changes bblayers.conf.
[YOCTO #3213]
(Bitbake rev: 966e3e59ceb1c8b33b5881f291c148ea6513eda0)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For example, this allows us to specify downloadfilename=PATH in sstate
mirror urls to improve directory structures in DL_DIR when using sstate.
(Bitbake rev: 7850a1364b6b37c58664d84f9c14806b4479b45c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The __config_regexp__ in ConfHandler is quite long, and using re.X to
break the expression onto several lines make it a bit easier to read.
(Bitbake rev: 54dce9e14ab0657d76f0d0ae22eef7fab8e8950d)
Signed-off-by: Olof Johansson <olof.johansson@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a circular dependency issue where bb.data can't directly depend on
bb.parse. The tests were failing due to this issue which is misleading. This
patch hacks around it for now. I'd rather that than not running tests at all.
(Bitbake rev: a206ae0d7769a41ff3666d0f53ff9cf422dfa518)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we pass the -O option whilst spidering, empty files are created which is not
desired. We also need to ensure any subdirectories are created when using the
downloadfilename parameter.
(Bitbake rev: d5f78e98d5aba36c95288fbaac267c2d54537b02)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bb.utils.contains function usage is getting increasingly used in the metadata
but isn't handled automatically by the python dependency tracking code. This patch
changes that and also adds the "OE" names for the functions.
Whilst there are reasons this is a bad idea, its likely outweighed by the
shear number of these references and the current holes in dependency information
which we're now relying heavily upon.
(Bitbake rev: 0b9d117631ce909312d53b93289e61defc6be01c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to track appendVar and prependVar calls just as we do for getVar in order
to ensure we're not missing variable dependencies.
(Bitbake rev: 767b4751232f4ee3979deb4d3f733fcf9ee2bd44)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Though the value of variables in the BB_BASEHASH_WHITELIST is kept out of the
checksums, dependency on them is not, at least for variables and non-task
functions. In the code, the whitelist is removed from the overall task dep
list, but not the individual variable deps. The result of this is that
functions like sysroot_stage_all and oe_runmake end up with whitelisted
variables like TERM listed in their dependencies, which means that doing
a 'unset TERM' before building will result in all checksums for tasks that
depend on those changing, and shared state reuse not behaving correctly.
This is only really a potential issue for variables from the environment, as
it's the existance/removal of the variable that's an issue, not its value, and
the other whitelisted variables are set in our metadata. This which means in
practical terms the only cases where this is likely to be an issue are in
environments where one of the following are unset: TERM, LOGNAME, HOME, USER,
PWD, SHELL. This may seem like an unlikely circumstance, but is in fact a real
issue for those of us using autobuilders. Jenkins does not set TERM when
executing shell, which means shared state archives produced by your jenkins
server would not be fully reused by an actual user.
Fixed by removing the whitelisted elements from the individual variable deps,
not just the accumulated result.
(Bitbake rev: dac12560ac8431ee24609f8de25cb1645572d350)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you have:
FOO = "a"
FOO += "b"
FOO+= "c"
The expected result is "a b c" however we were seeing "a b" with the FOO+
variable being assigned the value "c". This isn't the expected result.
We need to make the name part of the variale non-greedy so that any + character
becomes part of the operator. This patch does that. I compared the configuration
in OE-Core before and after the change and only the test case changed.
[YOCTO #3834]
(Bitbake rev: 2cd8d7fd12a646e6516e2c985e6a54121d19eb59)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to empty out the environment whilst we build the cooker but
we need the environment for the UIs since hob uses DISPLAY and other
session variables.
This patch adapts the utils functions to return removed environment
components so we can reinject them for use by the UI, allowing hob
to work again.
(Bitbake rev: fc330d810099c57fefd4e706159a73ad8401d97c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using the threading module interacts badly with multiprocessing used elsewhere
in bitbake under certain machine loads. This was leading to bitbake hanging on
Ctrl+C when the PR Server was being used.
This patch converts it to always use the daemonize code which
then means the threading code isn't required.
[YOCTO #3742]
(Bitbake rev: 2d0bbd9398ab839bd2d1e29e50b25d52efb1ce2a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following variables perform no function outside of bitbake:
GIT_CONFIG
GIT_PROXY_HOST
GIT_PROXY_PORT
GIT_PROXY_IGNORE
GIT_CONFIG only affects the git-config command which is not relevant to
the fetcher. This was previously used with the OE GIT_CORE_CONFIG
variable which would provide a basic git config to use instead of the
user's config. This usage was deprecated by git for over a year now:
http://git.661346.n2.nabble.com/Overriding-gitconfig-using-GIT-CONFIG-td6680977.html
GIT_PROXY_HOST and GIT_PROXY_PORT are not used by git.
GIT_PROXY_IGNORE was an OE construct used to create the custom git
config and had no meaning outside of the OE environment. It is not used
by git.
Remove these variables from the fetcher environment.
Users wishing to configure git to work with a proxy should define the
GIT_PROXY_COMMAND environment variable to use an external script.
NO_PROXY can be used within this script to skip the proxy for certain
hosts.
(Bitbake rev: e60270bdce6b8c2f8da1a4838aa374da9db3c86a)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applications are inconsistent in their use of upper and lower case proxy
variables. Curl, for example, specifies NO_PROXY (not no_proxy) in the
man page (changed in 2009 [1]). Avoid proxy issues by ensuring both the
upper and lower case versions of each proxy variable is available in the
environment for the fetcher commands.
Add FTPS_PROXY and ftps_proxy to the list as well.
1. http://curl.haxx.se/mail/tracker-2009-04/0012.html
(Bitbake rev: c3e6b2c5ec81d5ad7dcf606fff16fd5552bd267c)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Maintining hardcoded lists of user environmental variables is hacky,
replace these with the savedenv datastore. Allow access to that
through the BB_ORIGENV variable.
(Bitbake rev: 0a99563a4ea270594fd9a61da46f9387fb79dc66)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python 2.7 shows hangs with issues in its pool implmenetation. Rather than
try and hack around these, add a copy of the working pool implementation
to the compat module from 2.7.3.
(Bitbake rev: c9eb742637131e8dbd526d2ad9b458abea0a2d87)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a particular SRCREV (say for a particular branch) is missing, the
fetcher will currently just report an obtuse error about the "SRCREV"
being invalid. If there is more information is to be had (say from name,
i.e. branch, and pn) then display that as well.
The new error looks something like this:
ERROR: ExpansionError during parsing /home/dvhart/source/poky/meta/recipes-kernel/linux/linux-yocto_3.4.bb: Failure expanding variable do_patch: ExpansionError: Failure expanding variable SRCPV, expression was ${@bb.fetch2.get_srcrev(d)} which triggered exception FetchError: Fetcher failure for URL: 'git://otcgit.jf.intel.com/dvhart/linux-yocto-minnow-3.4.git;protocol=git;nocheckout=1;branch=standard/minnow,meta,emgd-1.14;name=machine,meta,emgd'. Please set SRCREV_emgd_pn-linux-yocto to a valid value
Note the variable listed as invalid is
"SRCREV_emgd_pn-linux-yocto", making it explicit what is wrong.
(Bitbake rev: 63774f5b4edb999300bddd891233f6050f4af877)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: bitbake-devel@lists.openembedded.org
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* taken from SFTP fetcher:
http://patchwork.openembedded.org/patch/43027/
(Bitbake rev: 88e565855b52e905156d85c3f45b341cddfe2f55)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* set localpath in urldata_init
otherwise localpath and basename were None, when fetcher was trying to
define .lock and .done paths
basepath = d.expand("${DL_DIR}/%s" % os.path.basename(self.localpath or self.basename))
* remove "host" from localpath
.done and .lock files are always using just basename, so if someone
has 2 recipes with:
SRC_URI = "ssh://foo/file.txt"
SRC_URI = "ssh://bar/file.txt"
then there will be only one file.txt.done in downloads anyway (and
only first file.txt from first server will be returned on do_fetch
(Bitbake rev: 41208760d70a657297f9ecfb48b74e2c3b594e70)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have agreed to change how we show the packages. Now they are not grouped by
recipe. Until now, it was implemented using TreeStore and I've changed it to
extend a ListStore. I have modified all the function in according to this.
[YOCTO #2180]
(Bitbake rev: 311e7ba8b2c88fbf6f16b6ffb1400226b155ddd4)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After some discussions about the design of the Shared State Settings tab in Hob,
we have decided that using a GtkTreeView to present and configure the sstate
mirrors is probably the best solution.
[YOCTO #3569]
(Bitbake rev: 2ff636910b9cf3099e8d961f4bbe71512c015ecc)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than only handling sys.stdout, also support any arbitrary file object,
and enable color for the formatter if that file is a tty.
(Bitbake rev: c46db4be4cc4dc53376ed3f574b2f1c868730f2a)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set the labels selectable; reset the warnings list when another machine is selected;
changed a label name
[YOCTO #3215]
(Bitbake rev: a4463d7b51828c32e55dea3c0dd51966d387abac)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new command in bitbake to save a variable in a file; added a function
in cooker which is called by this command.
Added new command in bitbake to enable/disable data tracking.
The function saveConfigurationVar from cooker.py saves a variable in the file that
is received by argument. It checks all the operations made on that variable, using the history.
If it's the first time when it does some changes on a variable,it comments the lines where
an operation is made on it, and it sets it in a line to the end of file. If it's not
the first time(it has a comment before), it replaces the line.
Made some changes in hob to save the variables from bblayers.conf and local.conf
using the bitbake command.
[YOCTO #2934]
(Bitbake rev: 55b814ccfa413d461d12956896364ab63eed70a8)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All it now does is function in a similar way to EXCLUDE_FROM_WORLD and
since we have a better named variable for this, lets just drop the
usage of BROKEN at the bitbake level.
(Bitbake rev: 8f4dcf794545273417d78ba18f51aa2b81606ae4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are two "self.file_depends =" lines in cache.py::CoreRecipeInfo:
class CoreRecipeInfo(RecipeInfoCommon):
__slots__ = ()
cachefile = "bb_cache.dat"
def __init__(self, filename, metadata):
self.file_depends = metadata.getVar('__depends', False)
[snip]
self.file_depends = metadata.getVar('__depends', False)
They are duplicated, remove the last one.
[YOCTO #3795]
(Bitbake rev: 409a4aa0e166c25a8cfcd91e54f1b61cced74e87)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If .hob exists, hob takes the variable from there. Change to not override anymore
the variables which comes from bblayers.conf and local.conf
[YOCTO #2934]
(Bitbake rev: 00533e83038e3d5e3cd5d1be73c45afece92ec0c)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 'select a base image' option is no longer displayed once
an image is selected
[YOCTO #3671]
(Bitbake rev: 27f2247b4c227c3b5adb1ca33d0cd7f7b492e170)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- one can use get_by_pattern to get a list of values associated
with keys that match the specified pattern
(Bitbake rev: 6ee1f58698e2d782c54ce5aec271bcec26107eac)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- enable the '~' character in bitbake variables
(Bitbake rev: 7c15ff1d50d7b601414f1d55c90e3c59981a0876)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-now Hob catches the warnings generated during parsing, and after the parsing
is completed, if there are any warnings, it shows a bar that contains a message
with how many warnings has encountered, and a button "View warnings"
-when "View warnings" button is clicked, Hob shows a dialog with the warnings;
if there more than 1 warning, you can use "Previous" and "Next" button to see them
[YOCTO #3215]
(Bitbake rev: d7b5311d35b3974398fecabfb5ecf1effa85c27e)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-the first implementation for this bug used a progress bar, that is shown
during open file process; it revelead that the progress bar stops earlier
-now I have implemented using gtk.show_uri() method, that shows itself a
busy cursor when it opens a file;
-deleted the code for the first implementation
[YOCTO #2997]
(Bitbake rev: 09d1c4c2db124104b9da460547b20a2c2ff07bb3)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was meant to be squashed into the previous commit for multiline comment
handling. It fixes the case the commented multiline is followed by an empty
line which was resulting in a traceback instead of a sane error message.
(Bitbake rev: 7e7d692e244fe8dca533f842ca143b9c821e317c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Faced with an expression like:
# Some comment \
FOO = "bar"
what should bitbake do? Technically, the \ character means its multiline and
currently the code treats this as a continuation of the comment. This can
surprise some people and is not intuitive.
This patch makes bitbake simply error and asks the user to be clearer
about what they mean.
(Bitbake rev: 589d31ce41e019ee6a7cb6527d67bc76c0b6382a)
(Bitbake rev: 79c00fabe08b4c210a3bd81cfaffbc47ffdc2e2b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Improve the error message the user sees if the versions are incorrect.
[YOCTO #3637]
(Bitbake rev: 7e3a99949358f4362876df5a82f8aeaae72c3c97)
Signed-off-by: Jessica Zhang <jessica.zhang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed "-r REV" from hg clone invocation to fetch the entire repo,
rather than just the subset at the specified revision. This will ensure
that the specified tag exists for successive commands (e.g., the update
built on line 149.)
(Bitbake rev: f0a6261d3a8ede9ebdb6383e02cb2c2de1690640)
Signed-off-by: Jon Szymaniak <jon.szymaniak@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changing the path to a file could change the task hash even if the file
still has the same checksum. This occurs when the task depends on
multiple files and the sort order of their paths changes. Usually the
sorting is consistent because layers tend to have the same relative
paths, but this should take care of other configuations.
The problem arose when using a .bbappend to add files to a recipe in
another layer. If the layer is located alongside the other layers and
their parent directory is moved, the hash does not change. However,
moving the .bbappend layer outside of the common directory can change
the path sort order and the task hash.
(Bitbake rev: 22bd19d208f0251f5a1f9b98f3cac66181f3fc07)
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch adds tracking of the history of variable assignments.
The changes are predominantly localized to data_smart.py and
parse/ast.py. cooker.py and data.py are altered to display the
recorded data, and turn tracking on for the bitbake -e case.
The data.py update_data() function warns DataSmart.finalize()
to report the caller one further back up the tree.
In general, d.setVar() does what it used to do. Optionally,
arguments describing an operation may be appended; if none
are present, the operation is implicitly ignored. If it's
not ignored, it will attempt to infer missing information
(name of variable, value assigned, file and line) by examining
the traceback. This slightly elaborate process eliminates a
category of problems in which the 'var' member of the keyword
arguments dict is set, and a positional argument corresponding
to 'var' is also set. It also makes calling much simpler for
the common cases.
The resulting output gives you a pretty good picture of what
values got set, and how they got set.
RP Modifications:
a) Split from IncludeHistory to separate VariableHistory
b) Add dedicated copy function instead of deepcopy
c) Use COW for variables dict
d) Remove 'value' loginfo value and just use 'details'
e) Desensitise code for calling order (set 'op' before/after
infer_caller_details was error prone)
f) Fix bug where ?= "" wasn't shown correctly
g) Log more set operations as some variables mysteriously acquired
values previously
h) Standardise infer_caller_details to be triggered from .record()
where at all possible to reduce overhead in non-enabled cases
i) Rename variable parameter names to match inference code
j) Add VariableHistory emit() function to match IncludeHistory
k) Fix handling of appendVar, prependVar and matching flag ops
l) Use ignored=True to stop logging further events where appropriate
(Bitbake rev: f00524a3729000cbcb3317fee933ac448fae5e2d)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This code adds inclusion history to bitbake -e output, showing
which files were included, in what order. This doesn't completely
resolve timing questions, because it doesn't show you which lines
of a file were processed before or after a given include, but it
does let you figure out what the path was by which a particular
file ended up in your build at all.
How it works: data_smart acquires a .history member, which is an
IncludeHistory; this represents the inclusion of a file and all its
inclusions, recursively. It provides methods for including files,
for finishing inclusion (done as an __exit__), and for
dumping the whole tree.
The parser is modified to run includes inside a with() to push
and pop the include filename.
RP Modifications:
a) Split Include and Variable tracking
b) Replace deepcopy usage with dedicated copy function
c) Simplify some variable and usage
(Bitbake rev: b2dda721262da8abb7dc32d019e18fbc32ed8860)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since hig.py was becoming too large (which impacted maintenance and
operations like git merges) it was split into individual files for
the classes that were implemented in hig.py. hig is now a Python
package (lib/bb/ui/crumbs/hig/). The patch was tested by
building core-image-basic/qemux86 in Hob and accessing the various
UI elements implemented in hig. Note that the patch does not change
the functionality of Hob in any way, it's just a code refactoring
that should make life a bit easier for Hob developers.
[YOCTO #3200]
(Bitbake rev: a7a2b730f915cafe7aa30539622dd1ca64ae41f5)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A recipe with no dependencies results in a traceback (e.g. all in
ASSUME_PROVIDED). This shouldn't happen and this patch fixes it.
(Bitbake rev: dee7decf87dfa8cb966fe40846d27f3e6ab1846b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- do not use the BB_URI_LOCALCOUNT database for computing revision
incremental numbers anymore
- sortable_revision now generates "AUTOINC+${latest_rev}"
- use one incrementing value rather than several
- PV becomes 0.1+gitAUTOINC+deadbeefdecafbad_decafbaddeadbeef
- remove all localcount code and simplify the fetcher
- this patch addresses the following proposal:
http://lists.linuxtogo.org/pipermail/bitbake-devel/2012-November/003878.html
(Bitbake rev: 61cf01c5c236b4218f40cfae7c059c2b86765dbd)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, calling a shell function using exec_func may result in
dependent functions being missing, if the shell parser can't detect
the dependency, even if it was specified with the vardeps flag.
This patch ensures the function looks at the flag and considers it
when deciding which other functions need to be output.
[YOCTO #3561]
(Bitbake rev: a906c94328b040d5076571bd593b57be7ee403a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As it is, when you create a new image from scratch, hob gives an error.
This is because of the patch for #2601.
(Bitbake rev: 42d9db0cc80ed45d769f843ccb51e0c194ec557b)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Till now, a custom image made in Hob was using only the packages from
the base image. Now it is using everything declared in the base image.
Also next to hob-image.bb, it creates another .bb file which is used
in building process. Those images are ignored by git.
[YOCTO #2601]
(Bitbake rev: 22007cf71a00fbb03b40f97201a6eb06c9aebd16)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change to use bb.error instead of print, or maybe that was desired (?)
Also remove a tab, while in the neighborhood.
(Bitbake rev: 4a36a1af71530afc8fa896271fa94362ead176bd)
Signed-off-by: Mihai Lindner <mihaix.lindner@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Doc cleanup, no functional change.
(Bitbake rev: 5161a84f5dcfe748382a5073349bf10ed21641f9)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If SkipParse is raised from something which isn't anonymous python, it wasn't
being handled correctly. This improves the handling for example from within inline
python.
(Bitbake rev: 7467d7d66b24cc8f43ab168e65895e7c4aee6092)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The method this older code was accessing doesn't exist. A library shouldn't
be changing behaviour based on the environment anyway when sepcific function
calls exist to correctly setup the logging. Fix the crash if BBDEBUG was used
by moving the code to bin/bitbake.
[YOCTO #3319]
(Bitbake rev: 3a1b75037fe1e5282ffd40b037e93353405faa45)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Executing "bitbake" doesn't get a sane message since the None return value
wasn't being handled correctly. Also fix msg -> cmd_action['msg'] as
otherwise an invalid variable is accessed which then crashes the server
due to the previous bug.
(Bitbake rev: c6211291ae07410832031a5274690437cc2b09a6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, if an exception occurs the server will silently crash
with no feedback to the user about why (since traceback isn't imported).
(Bitbake rev: e637a635bf7b5a9a2e9dc20afc18aceec98d578f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The inherits cache contains duplicate entries, some with the full patch, some
just starting classes/xxx. This is a waste of parse time and potentially
error prone. This patch fixes various pieces of code so the absolute paths are
always preferred and work correctly. The inherits_class function did not work
with full paths so the patch fixes this.
(Bitbake rev: f3a71e509af196391ec126d079cf1bd178e62ad5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current usage of EXPORT_FUNCTIONS is rather problematic since a class
list (classes) is passed into the ast statement and cached as it was
when first parsed. This class list may be different in other cases but
is locked once in the cache.
Worse, the construction of classes can be broken by exceptions during parsing
at the wrong moments since the state of the parser is not always reset
correctly. This can lead to leakage of other classes into the classes list.
The current EXPORT_FUNCTIONS implementation looks at the last two currently
inherited classes and sets up an indirect function call view the second last
class inherited, e.g.:
do_configure calls gnomebase_do_configure
gnomebase_do_configure calls autotools_do_configure
This intermediary doesn't seem to serve a useful purpose.
This patch therefore makes builds deterministic and fixes various cache problems
and indirection by removing the intermediaries and simply performing
directly mapping for the cases where its needed.
(Bitbake rev: 9fc98f96f0e0320beda0ce9546275a99336732c1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The classes variable in particular could be in an odd state if parsing of a
previous recipe had abruptly ended.
(Bitbake rev: 3dc5e896a97154914cee6c47900e3bb2a2627cdb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I appreciate a fixed value is suboptimal but this is better than not
working at all!
(Bitbake rev: d338a1ad14680af41d218772decd03e98eb2cad5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a race where the registerEventHandler() server call may happen in
a different thread to the main UI, causing the main UI to see
httplib.CannotSendRequest exceptions.
This moves the call into the main thread, removing the init race and fixing
errors I was seeing with the xmlrpc backend.
(Bitbake rev: 14cdd3b351d1ab23cb3ea5f853e403a53e67ac1c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An issue was uncovered where changing:
IMAGE_INSTALL_append = "X"
to
IMAGE_INSTALL_append = "X Y"
in local.conf would not get noticed by bitbake. The issue is that
the configuration hash doesn't account for overrides or key expansion.
This patch improves get_hash to account for these. This means the hash
does account for changes like the above.
[YOCTO #3503]
(Bitbake rev: 86bf1f5603e8f98019544e45f51bd0db9a48112a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Leaving the sigdata files around can aid debugging and doesn't harm
anything. This is the easiest way to allow this to happen.
(Bitbake rev: 1f500149ecd533a6edbeea902c3f1e009c755154)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "*" part of the mask is to ensure we clean both any stamp, and any
setscene varient. It turns out we would also trample other tasks,
e.g. do_package_write could trample do_package_write_rpm. do_package also
tramples do_package_write_* but this is less of an issue since the other
tasks depend on it.
Rather than use the wildcard, we can just use a list instead.
[YOCTO #3484]
(Bitbake rev: c14d831ea3f625e9a47266a0c4e6deefc924ca5a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wget commands for check and resume were
mixed-up, leading to the following issues:
1. long running "NOTE: Preparing runqueue"
reason: objects were downloaded, not spidered on the mirror
2. Failing network test in Build Appliance, because wget 1.14
(in use in BA) will fail if a file already exists.
During the network connectivity test, index.php file was
actually downloaded, not spidered (checked for existence on
yoctoproject.org website), leading to wget failure.
(Bitbake rev: d7a5185cae975eaca50a9785c6605e895dc7bb51)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The last changes introduced an error in some of the logic. Add brackets
to clarify the meaning of the expression and fix certain build failures.
(Bitbake rev: 87aea65bd5d553bd0495b0f1efe6d41d0bb2810f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- there are some layers which cannot be removed; so ,I have used
a new variable called BBLAYERS_NON_REMOVABLE located in bblayers.conf,
which contains those layers which cannot be deleted
- "meta-hob" layer is added to this variable in hob code, like it's
added to BBLAYERS var
[YOCTO #3176]
(Bitbake rev: 05da1621eed4c6201cd65372d229f63ea8a44b6e)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently there is code which uses FILESDIR in unpack to ensure
parent directories are created, leading to differing behaviour depending on
which search path is used to locate the directory.
This change standardises the code and takes the data from the fetcher in
question meaning we can standardise the code and deprecate FILESDIR.
(Bitbake rev: 1cccb3bd01ed82e4978acfef0fda1bd797eef72a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently wildcard matches end up working by FILESDIR being defined
in the metadata to a default of "." in FILESPATH which is hacky at best.
This patch adds the behaviour into the fetcher so its at least slightly
more explicit.
(Bitbake rev: 07b5f84133ac79aac4e939ea5f24390ad7f940a5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using curses initscr/endwin causes screen corruption if for example you
suspend bitbake and resume it. This changes the code to use a less
invasive approach to determining colour availability on the terminal.
(Bitbake rev: 4548a8f037eaf8d47a77052acc3e9ec264ac41e0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Run the sanity check only once
[YOCTO #3377]
(Bitbake rev: 0db80d57d4d2b1bb97375444c439827450ff33d1)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-to enable this in hob, first you have to enable this in bitbake using
BB_DISKMON_DIRS and/or BB_DISKMON_WARNINTERVAL vars
-created "restart the build" action on the build_fail_top_bar
[YOCTO #3357]
(Bitbake rev: 964ac25d153ff4da144963289a32066db0e28b89)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In normal usage, we never hit the timeout issue. If we do, it becomes obvious
that the current error handling is not good enough. The request may have made it
to the server and the answer will get queued. This means the next command may get
the return value from the previous command with suitably puzzling results.
Without rewriting large sections of code, its not possible to avoid this problem.
It is better to increase the timeout to several seconds giving the server a chance
to respond and if it does timeout, hard exit since recovery is not possible with the
code base today.
I'd be happy to see the structure of this code improved but this quick fix at least
stops corrupted builds from happening which has to be a good thing.
(Bitbake rev: 410c11dd10736873f2dc587fbe9119c38831e693)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add bold color output to log level name and standard color output to log msg
when bitbake is run from an iteractive console. Color output is only
enabled
if the terminal supports color.
Used Jason Wessel's recommendation for transparency on verbose, note and
plain.
(Bitbake rev: 2734240da2cc150f811129a6adf6eb4b2161b204)
Signed-off-by: Seth Bollinger <seth.boll@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Any issues encountered during the build (fatal or not) is displayed
in the Issues tab, and the total number of issues is changed.
[YOCTO #3376]
(Bitbake rev: 64c662ab7f09c2e867445e8ba21ea63ae014d45b)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the setscene code was originally written it was thought that we'd
allow "partial" coverage. For example, if we just want to build the target
"bash:do_populate_sysroot" and its available from sstate, it makes no sense
to install gcc-cross's sstate package as its simply not needed.
Due to various other issues in the codebase, this functionality was
disabled/removed to allow the setscene code and sstate to stabilise and allow
us to concentrate on other problems.
The time has now come to enable "partial" coverage. There are two major changes
in this patch:
a) Creation of an unskippable list. This lists direct dependencies of
build targets and hence things that cannot be skipped.
b) Addition of a handler which looks at a given setscene target and what depends
on it and then decides whether its necessary.
(Bitbake rev: 2a937cd6a6c3110030b40bc4d85e349b85cb4db7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The data returned by get_file_depends() may me used in contexts like
checksums where order is important. The current usage of sets means
that some of the checksums can change in circumstances they should not.
This patch changes to use lists, thereby removing the problem.
(Bitbake rev: a44285fc4109236ab89f7aad0a1fc9220eec19b6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The duplicated import could result in an UnboundLocalError.
(Bitbake rev: a098cebd5c33ebd704efd35d9e655262283cbe1f)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
"bitbake -e ASSUME_PROVIDED" should fail, but the error message wasn't
clear enough in the past:
$ bitbake -e bzip2-native
[snip]
ERROR: Command execution failed: Traceback (most recent call last):
File "/buildarea/lyang1/poky/bitbake/lib/bb/command.py", line 94, in
runAsyncCommand
commandmethod(self.cmds_async, self, options)
File "/buildarea/lyang1/poky/bitbake/lib/bb/command.py", line 323, in
showEnvironmentTarget
command.cooker.showEnvironment(None, pkg)
File "/buildarea/lyang1/poky/bitbake/lib/bb/cooker.py", line 325, in
showEnvironment
fnid = taskdata.build_targets[targetid][0]
KeyError: 0
[snip]
With this patch, the massage will be:
[snip]
ERROR: bzip2-native is in ASSUME_PROVIDED
ERROR: Command execution failed: Exited with 1
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
[YOCTO #3392]
(Bitbake rev: f31447dac92454c822d4ebb7dd48e96c6c69dde4)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-after pressing "build image" button, hob was freezing because it didn't
receive well the log file
[YOCTO #3398]
(Bitbake rev: e3619e34d43c3f7725fc83c362d8cbd07e153ebe)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, command.py can return an error message from runCommand, due to
being unable to run the command, yet few of our UIs (just hob) can handle it
today. This can result in seeing a TypeError with traceback in certain rare
circumstances.
To resolve this, we need a clean way to get errors back from runCommand,
without having to isinstance() the return value. This implements such a thing
by making runCommand also return an error (or None if no error occurred).
As runCommand now has a method of returning errors, we can also alter the
getCmdLineAction bits such that the returned value is just the action, not an
additional message. If a sync command wants to return an error, it raises
CommandError(message), and the message will be passed to the caller
appropriately.
Example Usage:
result, error = server.runCommand(...)
if error:
log.error('Unable to run command: %s' % error)
return 1
(Bitbake rev: 717831b8315cb3904d9b590e633000bc897e8fb6)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-small changes to the text of the progress bar when parsing recipes
[YOCTO #3282]
(Bitbake rev: 90c0dfc39c3ce13e53c7c91168dc3401f7df476b)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This code is dead and doesn't do anything so lets remove it.
(Bitbake rev: 8d45739f49618757a5d7d79782deda355e3981ec)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dumping the environment data into the console log files directory is
invariably not what the user wants or expects and leads to confusion
when looking at the log directory.
This change forces the logs to be disabled by default when using
the -e option.
(Bitbake rev: 5d825b31d1133e41d3982db1b94f6a30a6fb99f7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its a minor correctness detail but the update flag should be set
when Start events are encountered.
(Bitbake rev: 96683ed68e11672ff22fb4a291d2628676c136f0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was an issue where the last tasks run by bitbake would not
correctly get displayed in the knotty footer. This was due to the
total count including active tasks. This change ensures the footer
is displayed if the are any running tasks.
(Bitbake rev: d787e4efc106589811651bc18ca48d5223443b95)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-since the order of the layers can potentially impact
the build outcome, users should be able to reorder
the layers within the layers dialog;
-used TreeView Drag and Drop
[YOCTO #3270]
(Bitbake rev: 2bd9a00facb90f7d76a9bdaa86ca765fb2159e71)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
User introduced proxy settings were not saved
when a proxy details input dialog was opened.
The proxy settings were lost upon return, and
restored from the previously stored one.
Also:
Code cleanup:
details_cb() function duplicate definition
removed
Fixes [YOCTO #3240]
(Bitbake rev: aa64b2e472f8a9713e3dc25647aa2cae474e2622)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- indicating on progress bar that hob has gone from parsing
recipes to "Generating dependency tree"; this will provide
some visibility of what has caused the "stop" button state
to change
[YOCTO #3282]
(Bitbake rev: d964d04ff1f59a590bd3ab5430517d79e92536d0)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- created a new file named "hobthreads.py", defining a thread
for opening the log file in a subprocess using subprocess module;
in the future I think we will add some other threads here, to
implement some other performance issues
- on "builddetailspage", "packageselectionpage" and "imagedetailspage"
I have changed the manner for opening the log file; it uses the thread
to open the file, and on main thread it creates a dialog to show a
progress bar, which pulses till the file is open
- this was added because when the log file is big, it takes time to
be opened; on the dialog you can use "Cancel" button to terminate the
process initiated to open the file
[YOCTO #2997]
(Bitbake rev: 165362a63f085991b6bab63ab90a0c7b9bf6b784)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Image selection is not properly initialized to none,
and it used before having a chance to have a value.
Due to dynamic nature of Python, variable is used before
it exists, in this case. This causes a crash.
Bug introduced during the fix of [YOCTO #3228]
Fixes [YOCTO #3334]
(Bitbake rev: 1c540541c5397c38dca880a79df9ebfcda576d4c)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- added a scroll bar in the shared state tab from settings
- added a signal on it, so when you add a new mirror, it will
auto-scroll to the end of the list
[YOCTO #3229]
(Bitbake rev: 00afd6a25c0cc0a4fcddd9f7c26a17ef6c47cbd2)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Image selection is remembered correctly even after
advanced settings have been changed.
Selected image was reset even when it was not the case.
Fixes [YOCTO #3228]
(Bitbake rev: 93fb0a2c56100b2bbc8769af9ae2343c05e72193)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- when you do a build you should see "Log" page, not
"Build configuration" page
[YOCTO #2569]
(Bitbake rev: 431cb80d4d5222f832f6141b8578291f2f14a131)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-when the recipe parsing process is stopped, the progress bar shows
"Stopping recipe parsing"
[YOCTO #3259]
(Bitbake rev: d20626bd717bb8f5cfd73b91337af880198db247)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In "Edit Recipes" and "Edit packages" pages, the "Brought in by"
column is displayed correctly, with the right number of additional
packages and a proper title.
Fixes [YOCTO #2195].
(Bitbake rev: 4d1d3e5a54eb718e2eee02f734d929f15ccf99ce)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
added a method in progressbar.py that doesn't update the
percentage in the progress bar shown in hob.
the call of the method is done in builder.py.
(Bitbake rev: 7ab5775fceda1055b86bdc3313fc4bf928bf5155)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-when returned to the Image configuration page, after canceling on the
Recipe selection page, the image selected previously is now shown corectly
[YOCTO #3205}
(Bitbake rev: 0a755026661a18ae386eb64b807e9e9e8f0dfe4c)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
size_str = '%.1f' % (size*1.0/(1024*1024)) + ' MB'
from /bitbake/lib/bb/ui/crumbs/hobpages.py file transformed
the size in MB. In our file it was again multiplied by 1024
instead of doing a division by 1024, which brought a faulty size on
the edit packages screen.
(Bitbake rev: 7dcea3884a45973ae332695dc8a53814b701151f)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch allows the user to check the network connectivity in
the "Proxy" page ("Settings" dialog) by adding a button which provides
this functionality. It also disables retrigerring sanity checks if the
proxy values are changed, since now the proxy checks are explicit.
Note that this patch depends on a patch in oe-core
("sanity.bbclass: trigger network tests explicitly"). It will
not work properly if the patch in oe-core is not merged.
[YOCTO #3026]
(Bitbake rev: cb1354d29c0be27aee57b9783c724457ef6725fb)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This change also applies to task-core-standalone-sdk-target-dbg and resolves
build failures caused by the missing packages.
(Bitbake rev: 4cd0200e96fb282980a945b80af641a6e022e0b4)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- throw a Hob exception if runCommand returns 'Busy' or
'No such command'
[YOCTO #1245]
(Bitbake rev: 5a8e3baa66f845599a616f080a7efce81ecda631)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- qemu images cannot be deployed to hardware, even if live
images (hddimg and iso) files are created
[YOCTO #3196]
(Bitbake rev: 001b1c439ffa450cb8728b0fa9469fed63ae9bed)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- when displaying image details, even if the kernel information is not shown, the kernel value must be set (if dealing with qemu) otherwise running the image will throw an error
(Bitbake rev: 334125a98ecb8a938aee4bc530205ad75099361c)
Signed-off-by: Ioana Grigoropol <ioanax.grigoropol@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is a common mistake to use http:// and protocol=git when attempting
to fetch from a git repository using the http protocol; if this is
detected then throw an error explaining that you need to use git:// with
protocol=http instead.
(Bitbake rev: 5bc4930c1638db16bcd5f9c8cfc4081f9ffc192b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some reason the code calls int() on the epoch component of any
PREFERRED_VERSION. Since this is compared against strings, the comparison
would always fail. This removes the stray cast and allows epochs
in preferred_version to work correctly.
[YOCTO #3187]
(Bitbake rev: 117b47553970fc5307374cbf500744b7c302efb4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- the title label is destroyed at page switching (that's why we need
to generate it every time)
[YOCTO #3195]
(Bitbake rev: d6d991c08f66cf9ab27c53075109212ea9129380)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>