Sometimes it is convenient to prepare a bootable image from the
host rather than using a live-image to install to a disk on the
target.
This script takes a live image as input, partitions a device, and
performs the installation just as the installer would if run on
the target.
(From OE-Core rev: 7225c6739f9f1e51741a42437692868165aa1dfe)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The rpm should depend on bison-native, otherwise errors when "bitbake
rpm-native" in a fresh build:
| make[4]: Entering directory `/path/to/rpm-native-5.4.9-r46/rpm-5.4.9/syck/lib'
| bison -d -t -v -p syck -o gram.c gram.y
| make[4]: bison: Command not found
Basically, both the rpm-native and rpm should depend on bison-native,
but don't need depend on bison, but it seems that it isn't necessary
to add another depend line:
DEPENDS_virtclass-native = "libpcre-native ... bison-native"
So just add it to the DEPENDS.
[YOCTO #3123]
(From OE-Core rev: 839faed2e7ef554668f647732c7ee1c8d339c123)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is needed in order to run postinst scriplets at do_rootfs time
rather than first boot time.
(From OE-Core rev: 9db6ea4981fe22dd430c13d9f5a838ad92d1afe6)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oe-core removed the prerequisite to have sh as bash. POSIX doesn't define
any options and furthermore allows 'echo -e' to be the default behavior.
This means that in dash 'echo -e' will actually print '-e' and interpret
backslashes by default. We use instead 'printf' builtin command with or
without '\n' to simulate 'echo -e' or 'echo -n'.
'printf' needs format while 'echo' can be used without any arguments. So
'echo >' was replaced by 'printf "" >'.
'echo' without '-n' flag adds a new line by default so to keep the same
behavior of two new lines while using 'echo "\n"', 'printf "\n\n"' is
used.
[YOCTO #3138]
(From OE-Core rev: a19880ad10ccb5d7d909dcf9de5c3dc58a0ebcd3)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a build was stopped, it wasn't obvious what to do next.
Now, on the page it appers a top bar with 3 buttons: "edit image",
"open log", "build new image"
[YOCTO #2537]
(Bitbake rev: a6afd15b7a40919313e26777b514ae44b587a0f6)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the '-s' option is run, change the heading above the list of recipes
to say "Recipe Name" instead of "Package Name".
(Bitbake rev: d1c3a9de875fb488a56ab5cb1d2f8e2f24f31d69)
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Once package building completes, you can customise the list of
packages that will go into the final image. Once you have made
the changes you need, you can either build your image, or you
can exit the process and go back to the 'Image configuration'
screen by selecting 'Cancel'.
[YOCTO #3105]
(Bitbake rev: c5fd1824c9794923576ec1e747536c0430542fd1)
Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This takes advantage of new bitbake functionality to clean up stale stamp
files when creating new stamp files.
[YOCTO #2961]
(From OE-Core rev: e21b6c04e512a3bc2339a20045b7041f1d26e859)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If an event handler failed we were not recieving an error message -
parsing just "froze" at 99%. This is because we were expecting a
CommandFailure event and this never happened in the case of
RequestPackageInfo which is where the failure was occurring.
This also required tweaking the error formatting slightly, taking the
return value of the format function rather than the message property
since the latter only seems to contain the first line without the
traceback in the case of event handler failure. Other error cases were
tested and their message formatting is unaffected by this change.
Final part of the fix for [YOCTO #2651].
(Bitbake rev: 5bab81b124087d63d6eb62a861e1241714fcd483)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "distro" combobox was moved to advanced settings, but it
was also present in simple settings. This patch removed it
from simple settings.
(Bitbake rev: 6d56bec4464da14d7fde0e60946be43293ad6e52)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently when we execute a task, we don't remove other potentially stale
stamps. This can mean if you switch between two different versions of a
recipe without a clean, the build can get very confused.
This patch adds in functionality to allow a wildcard expression of stamp
files to be removed when creating a new stamp file. This patch adds in
the core of the code to enable this but it also requires metadata support
to enable it.
When writing this improvement I went through several different options but
this was the only way I could find to allow things like noexec tasks to
function correctly (where stamps need to be created without the data store).
[YOCTO #2961]
(Bitbake rev: e026469b307522e5b6a680e0ae5587749d33dcae)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add in misssing space between the parameters. Reported by
Jate Sujjavanich <Jate.Sujjavanich@myfuelmaster.com>.
(Bitbake rev: 55382f0aac84b8f81cad0b82053c0b8295c33e54)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The code in the CVS fetcher is elderly and there are simpler ways of
using the data store. This updates to use the modern APIs.
(Bitbake rev: 78eee8c70a80997293df99475153aed0b2ad0a17)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The localdata variable was removed, fix up a lost reference to this.
(Bitbake rev: 02ccc1396005ce0b7a2150a5ce12b723df21d464)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix some issues with the settings dialog that were introduced as
a result of merging the fix for #2162.
[YOCTO #3117]
(Bitbake rev: a363f59579e01cb7bd39be2ce73f22c875c62ce7)
Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rename all the 'View log' buttons to 'Open log' for
consistency.
[YOCTO #3045]
(Bitbake rev: 7bc9b0c1c2544b494959b13ac79ac3e52edb4fe3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This ensures that our event handlers get run in registration order, making the
behavior more deterministic. I pulled in the python2.7 OrderedDict to avoid
essentially reimplementing a version of it ourselves, figuring we can drop it
when we bump our required python version next.
(Bitbake rev: 44aa0b0537d3fbd1272015e7677948f84d8c0607)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These QA warnings undermine the quality impression of OE-Core. They are
useful in some specific circumstances but until the system has been audited
and these warnings are reduced, they shouldn't be showing by default.
Therefore disable them for now.
(From meta-yocto rev: e1dcffb66317b98fe5a0f545bbea80a6a48fc02b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This removes the dependency on a seperate binary which we
don't seem to have. So, use mksquashfs's -comp lzma to
replace that functionality
[YOCTO #3126]
(From OE-Core rev: 8e82713724dfcb40f2ae24a166ec94f50f8b4cd0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
RPM does not name it's packages with the Multilib prefix,
but the rootfs_rpm class keeps track of the Multilib prefixs
in a list. Use that list to re-attach the prefix for use with
the license bbclass, buildhistory bbclass will also use this
and make it more accurate between multilib and non-multilib.
Use the embedded "Platform" information to ensure we get all
the correct matching.
(From OE-Core rev: f72abd80b0cc9d27aad2e31ecb548b4ab0fd8f67)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This fix is needed for systemd to work on powerpc
(From OE-Core rev: 76f3a1979ea166238e26a2569fb06a4a403bd864)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
nfsservctl syscall does not exist for x32, so return an error.
(From OE-Core rev: fddcb9dd086cfb396255ae5c8f717a39c6b9c4b0)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fix bad runtime dependency that was causing -exa to be a suitable candidate for xserver-xorg, thus resulting in no X server in some situations
(From OE-Core rev: 467c59495d83748d35846e8b37548182fea99cbf)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were 2 issues with this symlink.
1. Is was installed in base_bindidir but packaged in bindir. Fixed to
be packaged in base_bindir
2. The symlink swapoff was created to point to swapon. The problem is
that swapoff is an alternative so it would end up pointing to
swapoff.util-linux which was an inexistent file. The fix is to create
a symlink swapoff.util-linux to swapon.util-linux.
(From OE-Core rev: 0ff32e8fb5463a23af9966afcb58eb00772af65b)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update version information of packages lsb and ltp.
(From meta-yocto rev: 347f9ff4d49412c58a45094bc21a5e3e87b93e53)
Signed-off-by: Kang Kai <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The comment for debug-tools states valgrind will only be installed for x86
targets. This is not true as valgrind now supports x86*, PPC* and ARMv7a;
delete the comment as the architecture support is now so varied.
(From meta-yocto rev: bbb44a247ab3d3d2b9630a258a4b24338ffe12e8)
Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Use mkdtemp for generating temp dir names
- Use bb.utils.remove for removing temp dirs
- Add comment for explaining the "patch" workaround
[YOCTO #3070]
(From OE-Core rev: fbe9fc4d5ece1e66b03b4c4bce9b7ffad3b5b138)
Signed-off-by: Constantin Musca <constantinx.musca@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For 1.3 there is not longer a toolchain tarball. Instead, there
is a wrapper script that lets you install the tarball. This
fundamental usage model change caused several ripples throughout
the documentation set. I have changed wordings and examples
to reflect the new paradigm.
(From yocto-docs rev: afb2069daa91e04c0f78ba425a6b184cb820d888)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The steps for creating a project in Eclipse vary a bit between Juno
and Indigo. These changes reflect that.
(From yocto-docs rev: a020ecde8ed02a29f67498ef1511261d2054f784)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a couple of reminders and some links to information about
separately extracting and installing the sysroot filesystem.
(From yocto-docs rev: d340dcb5021fe1dcdaae0830ef8624c0fc54bedf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added text indicating that the user is prompted to verify the
cross-toolchain installation location.
(From yocto-docs rev: 3226eb2f0807687e8685702850a3a12b3d60ae5f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a command to the example that places the user in the
adt-installer folder before they attempt to run scripts/adt_installer
for completeness.
(From yocto-docs rev: f098e1095d24d0271fb21f50aa848ebc05b828b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to test out the lastes version of installing the Yocto Eclipse
plug-in from the latest source. Small changes to be more complete
on the step-by-step process with regard to being in the right
branch. Also, inserted 1.3_beta as the version. This will change
later.
(From yocto-docs rev: 1326916a7d03bdbb0613e6e26a4089b3bd87d204)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed the repo example so that the -b option is right after the
git checkout command and so that the "origin/" string is part of the
example.
(From yocto-docs rev: ba7ed26cf308a69e1ec8cfb0072dd10742af4ac5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Slight wording change to the description of the
PACAGE_BEFORE_PN variable description based on feedback from
Paul Eggleton.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: 8f7dcdb8edf461133d2149eb4728ee3682affc98)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the variable from BB_ENV_WHITELIST to BB_ENV_EXTRAWHITE
in the text before the example line. I had the wrong variable
in there.
(From yocto-docs rev: f909a7336ae2f95baa751231beeae08081576e1f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2904]
Added glib-gettextize package to the list of required Fedora
packages.
(From yocto-docs rev: c46f8e46ad70bf979d2e51e58d461bcd9456b773)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the BitBake "Preferences and Providers" section to remove
references to these two Pimlico applications that have been removed,
and tweak the example slightly so it is technically correct.
(From yocto-docs rev: 744624a40d02a859b3c526f5ea6657d32edd39c6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
List frameworks we provide that are likely to be used by people these
days - Pimlico has been removed and GuPNP and Matchbox don't really
belong. Also slightly modify the sentence following so that it is clear
that these are optional.
In addition to Paul's patch, I cleaned up one of his sentences with
some simple grammar edits.
(From yocto-docs rev: 1cdeb057bab0d69fe6656e33e643962dd2086567)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* core-image-core was renamed to core-image-x11 and the editor and file
manager were removed.
* core-image-basic's description has been updated to reflect its
intended purpose
* core-image-lsb is intended to be standalone - should not be
associated with core-image-basic.
* The Pimlico applications have been removed so they are no longer
present in the Sato images.
In addition to Paul's patch, I removed the "etc." word. This word
is better replaced by "and so forth". Also, consistent with the
YP documentation.
(From yocto-docs rev: aba7ae60a38dfeda9ef52237b81f387984621847)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a short section about packagegroup.bbclass.
In addition to Paul's patch, I changed the title of the cross-reference
to be the actual title used in the YP Development Manual.
(From yocto-docs rev: bfd4db7e0ef61a2dd7159cdc841dcffc2d9c53d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart
Robert Yang
Laurentiu Palcu
Andrei Gherzan
Marcin Juszkiewicz
Ross Burton
Cristiana Voicu
Trevor Woerner
Richard Purdie
Paul Eggleton
Bogdan Marinescu
Constantin Musca
Christopher Larson
Saul Wold
Khem Raj
Martin Jansa
Kang Kai
Jack Mitchell
Scott Rifenbark