Scrubbed the manual for the term "Yocto Project", which has been
over-used. I updated occurrances to better represent actual bits
rather than generically referring to everything as Yocto Project.
(From yocto-docs rev: f70cffeffa0d8863a88783607621bf6f7125d02d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example did not specify to switch to the "denzil" branch after
establishing the local repo of poky-extras. The example will not
work without this step.
(From yocto-docs rev: 90071570bca2edfceb4adb91bdd9093c095c8825)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previous renditions of the term "Build Appliance" referred to the
VMware system. However, it was determined that the term
"Build Appliance" should really refer to the actual image that
can be booted and run on the VMware applications. I have updated
the areas affected by this change. The change assumes the name of
the built or downloaded file you boot will be named
"build-appliance-image."
Fixes [YOCTO_#2656]
(From yocto-docs rev: 6b27b7d92b9722351eb43a7c2a341ce3af056dba)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor typoes in first couple chapters
(From yocto-docs rev: 36618cc6a261a994b00c5c524c76cbf3952a2eae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved the sections on remote debugging and using the profile out of
the YP Reference Manual and into the YP Development Manual. These are
now two sections in the "Common Tasks" chapter.
(From yocto-docs rev: 42640bf69aa05c56eb112c10b6d7b96069173785)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section "Modifying Temporary Source Code" that was in the chapter
for "Common Tasks" was moved to the "Common Development Models" chapter.
After discussion with Darren Hart, modifying temporary source code
is a valid develop model. So, rather than isolate it in the common
tasks chapter it has been placed in the development model chapter,
which now has four types of development.
Changes were made to update the introductory text of all the concerned
areas of the manual.
(From yocto-docs rev: 8b07ee3bcda9c13e576b54b0079b0656cd8fcc32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Using Pre-Built Binaries and QUME" section needed to incorporate
some information from the YP Reference Manual. I have merged those
changes in and did some re-writing to blend it well.
(From yocto-docs rev: 5c20f00f9ec75c19fd0106c9f241751381ba7e3c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed two larges sections of old comments.
(From yocto-docs rev: df1b08b621f2b449c7575b86ec90c40f1606c43d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated a note to include information about what happens if you do a
kernel build and have your machine compatible with every possible
kernel. This extra information is useful for rational.
Reported-by: Bruce Ashfield <bruce.ashfield@windriver.com>
(From yocto-docs rev: e631ec44be49d456add6a53ff3db89016d187370)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The linux-yocto_3.2.bbappend example was out of date. There is no
longer a kernel features statement in the last part of the section.
Only COMPATIBLE_MACHINE, KMACHINE, and KBRANCH remain. I removed
the fourth one from the text description and the example code.
(From yocto-docs rev: 1a6d3cad48f1b52e5b029434ce655940c6024694)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note telling the user that the commit ID strings in the
example might not match the actual commit ID strings found in
the .bbappend file.
(From yocto-docs rev: 5cb845361c8ce8b60dcafc28d1bc01d54badd67a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to a bug (2256) the example that changes the kernel configuration
through menuconfig did not work. I have re-written the section
to now start with the default behavior of CONFIG_SMP=y and then
have the user change the configuration to where it is not set.
The changes include the reversing of the flow and the work-around
needed due to bug 2256.
(From yocto-docs rev: 6fa9eee12ed83f81470beb9792fb4fc1c5104f69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added entries for the Manual History table for upcoming 1.3 docs.
(From yocto-docs rev: 430b384035593cd05c4f286e20c01f0fe72da8ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that compliles the altered code will not run now when the
KMACHINE statement is in the linux-yocto_3.2.bbappend file. I have
commented it out of the book.
(From yocto-docs rev: 3f67b34daf1ad598b4d07f5e2a60d8c63da754b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The KSRC example needs "_3_2" at the end of the variable.
(From yocto-docs rev: e6bcbe8504f72777a03e9b08de95d5e2741700a3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turns out the KSRC_linux_yocto ?= /home/scottrif/linux-yocto-3.2.git
statement in the linux-yocto_3.2.bbappend file in poky-extras needs
quote characters around the pathname. I updated the example
statement.
(From yocto-docs rev: eac1b53c04398152b41ac280fdc030615c165112)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found two instances of "yocto/standard/common-pc/base". this should
now be "standard/default/common-pc/base".
(From yocto-docs rev: a2f4ac3885de1157e6d718cfea9b29a67c76aeb0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel used for example is no linux-yocto_3.2. I changed
all occurences of yocto_3.0 over to yocto_3.2
(From yocto-docs rev: 7ee8f86fd0f44197901c851a16c58aa5f6851b1f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example code with the printk statements needed to be altered.
And the wording supporting the example was modifyied to be more
generic.
(From yocto-docs rev: f76465e920c3959230196814f17890065c613730)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Looks like calibrate_delay(void) changed in the example. Updated
to the most recent code.
(From yocto-docs rev: f1abcbf730c4b50ceb925e41181429c04eb2d55e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the example sets up the bare clone. The shell output changed
because the upstream repo changed to
"origin/standard/default/common-pc/base".
(From yocto-docs rev: cc3a8dde7b7f70174225ec95303d0280697d674b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New image needed for Denzil. I created a new file named
"kernel-example-repos-denzil.png" and copied it to the
Figures folder. I also deleted the
"kernel-example-repos.png" image.
(From yocto-docs rev: 97105187735c15e452580a0174897517c1860f2c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the "Building and Booting the Image" section there is an example
.hddimg file. I updated the file to be the actual file used during
the BSP example build.
(From yocto-docs rev: 165feb4d501a2ed984b742ea9f10e6c2037972da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For 1.2 you evidently need to add $HOME/poky/meta-intel to your
bblayers.conf file.
(From yocto-docs rev: d5565d9aa14590622373996a037cc16d34e9107f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wording for linux-yocto_3.2.bbappend file updated to support the
addition o fhte KBRANCH variable.
(From yocto-docs rev: 267d7dffc05dc495dbd27b6435bea7ba48cd4cfa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
edited it to now include the PREFERRED_VERSION variable.
(From yocto-docs rev: 72d8f7bfcad0fff191c998f90369499a78d62696)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on changing recipes-kernel was way out of date.
I updated all relavent changes.
(From yocto-docs rev: 91538864e6da8c4d0a495e52feafe01ce7afea9d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kernel used in now 3.2 and not 3.0.
(From yocto-docs rev: 974cb0c3665a2767a04ab6261692e93cc2f9200b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The layer.conf file now uses a LAYERDEPENDS variable. I added that
to the example.
(From yocto-docs rev: 237eb7ba897479935ac4c3165ce2cb350143a1e3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel in mymachine.conf had to be changed from 3.0 to 3.2
(From yocto-docs rev: cd94a4d45a062e9282de15dfda25983c500c0548)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The output for creating and switching to the denzil branch
for meta-intel needed updated.
(From yocto-docs rev: ad29c8f73ab3cec930f21939744cff322b43dfdc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The variable substitution had to be changed from
"&DISTRO_NAME;-6.0.0.tar.bz2" to "&DISTRO_NAME;-&POKYVERSION;.tar.bz2".
(From yocto-docs rev: 258b4c7fb46d2e6fb2da7bf2f59cd4f5c035b15b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a link to the Yocto Project Files term.
(From yocto-docs rev: 9d92248cb5dd862095e815c008e1f47e7518856a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to remove "poky-" from the front of this variable that resolves
to a YP Files top-level name from the tarball.
(From yocto-docs rev: a9ccf2bec4f2f916e854d10aa992f0c45eb0ed3f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Throughout the documentation set I have refered to the YP build
system generically in order to avoid use of the "Poky" term. Richard
has suggested that we refer to the actual thing that does the building.
So I have added BitBake to this particular sentence to refer to the
tool.
(From yocto-docs rev: eaed76bbf97bd34205eace952a1efbc600890815)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file was replaced by a release-specific file named
"kernel-overview-3-denzil.
(From yocto-docs rev: 85220f16ce10086372f9d81c61cb4e3eb40d52e4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
dev-manual/dev-manual-model.xml: The Bare Clone and Copy of the Bare
Clone figures are out of date for denzil. These needed to be
re-done so they use "linux-yocto-3.2.git" and "my-linux-yocto-3.0-work"
as the root names. This presents a Makefile issue when making the
denzil and pre-denzil versions of the manuals. Whenever you use a
different figure for a different release, you need to involve the
BRANCH variable in the Makefile. This is necessary because you are
using different figures in the generated tarballs. The set of figures
could be unique to the release. The outdated figure is
"kernel-overview-3.png" and will eventually be removed (later commit).
I created a new figure named "kernel-overview-3-denzil.png" and used
that in the dev-manual-model.xml file.
documentation/Makefile: I updated the Makefile to test for a
"denzil" release build and if so include the new file in the
generated tarball. This commit adds the new .PNG file as well.
Fixed the Makefile so that if you don't supply a BRANCH value, it
uses the latest figures (denzil).
(From yocto-docs rev: b3550d7640343cd5459efb04c591b81a1e41bc1b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the Note wording to work with the list and not be specific
to a number of supported kernels.
(From yocto-docs rev: 04b941264c001fc2f8e105637436b8d95a770357)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The list specifically named four kernels supported. I changed it so
it would say "several kernels".
(From yocto-docs rev: 8134eae4bce85e18a4402606e2cac6cb422cf0cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several things out-of-date for step five of the BSP Creation overview.
(From yocto-docs rev: 6bf1c93315c2fe604dbe468a29d9e2159bf7aceb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link and wording to the YP Downloads page on the website was
wrong. Fixed it up.
(From yocto-docs rev: 191856e4441bcea078868d22d019f4f1cdd62512)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more detail to the pathname for the example
formfactor_0.0.bbappend file.
(From yocto-docs rev: 4bd9ac9f189689ddb8806c750545223e1e55cd4b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a reference to Yocto Project Files and provided a link.
Put in an updated version of the meta/recipes-bsp/formfactor/
formfactor_0.0.bb file in the example.
(From yocto-docs rev: 031113db6d67beaee2e4f8225c7d4d2bc9380b05)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated various shell output examples created from cloning various
Git repositories, etc.
(From yocto-docs rev: 76024b2648c383bf19e6fee81d54c6a992e8d593)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the shell output example when user creates a bare clone
of kernel. We use linux-yocto-3.2 here.
(From yocto-docs rev: 69e3aa7a42d03cff23379432f5d1b496157d5c0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that creates a local branch based on a release tag
in the "Repositories, Tags, and Branches" section was not optimal.
Darren Hart informed me that naming a local branch the same name
as a tag confuses Git. Plus, the "-b" option was mis-placed.
Renamed the local branch to have "my-" in front of it and moved
the "-b" option earlier in the command.
(From yocto-docs rev: 29f4ea267ef687431e09eca4634fcb6cc48a6f81)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example in the "Repositories, Tags, and Branches" section that
creates a local branch that tracks the upstream branch is incorrect.
The syntax should be "git checkout -b &DISTRO_NAME; origin/&DISTRO_NAME;
Fixed it.
(From yocto-docs rev: ec80d43ad97370771c9cd7f7e6a4637db5f80e9b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added Hob and Build Appliance to the list of other stuff the user
might want to reference.
(From yocto-docs rev: 4c94654e53e422e5e0a54476e3ca88e682f177af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better wording for the role of BitBake. Updated shell output for
the clone of poky.
(From yocto-docs rev: eab184de2bd2b22def9dbe0c93b153ec9334402b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As suggested by Paul Eggleton and Richard Purdie, the example that
describes another method for creating a cusomt image was modified
so that it is based on an existing recipe instead of requiring a
new image.
Reported-by: Paul Eggleton <paul.eggleton@linux.intel.com>
(From yocto-docs rev: 65287ca135422a588d799143d93ccd4d058684ff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After some discussion from Song and Richard, the dates in the
manual revision table has been updated to "April 2012" for the
1.2 release.
(From yocto-docs rev: b3fc2ec7c5aedb8ea0a2d502bdcd7e8f4092ed96)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did a quick and dirty scrub over the manuals for the strings
"1.1" and "edison". I found some instances that were not properly
variablized. Also, discovered some references to the
linux-yocto-3.0-1.1.x. All but one instance of this needed changed
to linux-yocto-3.2.
(From yocto-docs rev: 620fb4b7626defcefc8a039de09ae4599ee7f454)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Five tables updated for the five manuals that have the tables.
Used "May 2012" as the date.
(From yocto-docs rev: 0d4d46ba300c07ff9c73186506be5b409bef9d1b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
kernel26 is now obsolete so remove mention of it from the docs.
Removed from docs.
(From yocto-docs rev: 7b9da106d746192f802095584b04e3ee8347eabd)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A reference to meta/recipes-sato/tasks/task-poky.bb is made as a good
example of a task; however, this file / recipe doesn't exist. I
replaced it with meta/recipes-core/tasks/task-core-boot.bb, which I
think is a both useful and basic example to consider.
(From yocto-docs rev: 977877efa7781dd00c53cfa914dd710de7d934a1)
Signed-off-by: Robert Cochran <yocto@mindchasers.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1980].
Changed MULTILIB_IMAGE_INSTALL to IMAGE_INSTALL in the multilib
example. This variable is no longer used.
Reported-by: Matthew McClintock <msm@freescale.com>
(From yocto-docs rev: dfcbecf945b19e559b39b5824dc6b8bb37c18702)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Example corrected.
(From yocto-docs rev: 844ffad1e3b998d62ea7c10273785d710dc3541e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1888]
Per Darren Hart I swapped in the real example and added some text
explaining what the user needs to do if their source is from a
tarball.
Reported-by: Darren Hart <darren.hart@intel.com>
(From yocto-docs rev: a1991f0b6f32a0a296ae4d115a834ed61042720b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed title pre Richard.
Reported-by: Richard Purdie <richard.purdie@intel.com>
(From yocto-docs rev: 2ec1368c4bdf5d61e3a7d60d3293ba878939321d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some edits to the text of this moved section.
(From yocto-docs rev: 69ba05bbdc8a6fb74efdfbb3214a562e564f5a68)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Per Richard Purdie's suggestion, I moved the discussion on using
BBMASK out from the "Customizing Images" section and placed it into
a section of its own titled "Excluding Packages from the Build."
(From yocto-docs rev: edb01b30779117f92e710b8afefa9a5d8a3e78fa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Placed the "Customizing Images" section in front of the
"Adding a Package" section.
Reported-by: Rudolf Streif <rstreif@linuxfoundation.org>
(From yocto-docs rev: 68a7ef421b9b66cc7f0a2180c1ef17c8c4ec2ed4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There needed to be an entry in all the manual history tables
that indicated this version of the manual is for 1.2 but is
WIP.
Reported-by: Rudolf Streif <rudolf.streif@linux.com>
(From yocto-docs rev: 6792b88af4f0171cfc84e4d77bda871d4af3d36c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Old link to POKY_EXTRA_INSTALL. I changed to
CORE_IMAGE_EXTRA_INSTALL.
(From yocto-docs rev: 8c8308025443e2fd061faa03fe4f6245c58603a5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information about Hob to the introduction part of this
chapter. The chapter is going to have a section that introduces
and speaks a bit about the Hob.
(From yocto-docs rev: dd98b3132ff4660397c37a223af8c4c2835a5276)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added more information to the YP Term "Append Files."
(From yocto-docs rev: e1a7e9b0a790d394e237a0972140107d11178408)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put in a link to reference another example of using a .bbappend
file.
(From yocto-docs rev: b5a5433506adfe46276584e51dc19fc153ea098d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed text that described how a config file was referenced.
(From yocto-docs rev: 29846fcb4fd6f90452023e1f627ef76f1a056ac6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to better describe what a .bbappend file is.
(From yocto-docs rev: 81527358615c229a9161568a30785221c9f081ff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided a clearer full name for .bbappend files.
(From yocto-docs rev: 4ee07af442c26aa06a6b295df758f41838b407df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits to the BSP Guide, the Development Manual, and the
Kernel Manual to address [YOCTO #1717], which noted confusion
over the kernel manual when a user was trying to find kernel
configuration information.
The fix for this bug involved several areas. I had previously
created a new section called "Kernel Configuration" in the kernel
manual and "Configuring the Kernel" in the YP Development manual.
There were several rounds of feedback from Bruce Ashfield.
This commit represents the final touches on the three manuals to
address the bug.
Fixes [YOCTO #1717]
(From yocto-docs rev: de8f85753ad1d6dde66adb6bb4cb09e9528c7cd6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Layer section review comments from Paul Eggleton added.
(From yocto-docs rev: a536fe1635dbe9157e86995e7a78568e41a75957)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implemented Paul Eggleton's review comments for the "Understanding
and Using Layers" section.
(From yocto-docs rev: ec376754f63122a1bd31d47e153ee3e872aac0b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I converted the hard links to use the variables as established
in the file poky.ent.
Also, Cleaned up some bad text in the term "Yocto Project Files."
Looks like a cut-and-paste problem.
(From yocto-docs rev: e2e20bf4895d80dae73595e93132f37fb31121d1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section describing how to set up meta-intel has been re-written
to provide more information about this Git repository and why
it is important. Also, added information explaining why user
should use the same set up method (tarball or Git repo) as used
to set up the YP files tree.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 53fbfc59f0183a6b8474ed643302faffef79356b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Robert P. J. Day
Tom Zanussi
Robert Cochran