Commit Graph

36 Commits

Author SHA1 Message Date
Oliver Smith ea8cea6735 git clones: update git.sysmocom.de urls
Related: SYS#6022
Change-Id: I1ebd33c26df99e288a281bd2946d6fe43a6a1c25
2022-09-16 15:31:56 +02:00
Oliver Smith 53dc1b9dfb git clones: protocol=git -> protocol=https
Related: SYS#6022
Change-Id: I3287ee8e7c688d900ee2821cb603a41a8d9067a7
2022-09-16 15:31:46 +02:00
Holger Hans Peter Freyther 1016ac1dbc linux-sysmocom: Use the only working module scheme
In fido the old autoload feature doesn't work anymore and we
need to remove it. Otherwise our sysmobts.service file will
create the /dev/dspl.. /dev/fpgadl... firmware upload files
and we all think that firmware loading is working.
2015-08-07 19:23:45 +02:00
Holger Hans Peter Freyther d0610b60cf linux-sysmocom: Move the mISDN legacy to the 3.2 kernel recipe
Only in 3.2 we are using mISDN for lcr. Move the module loading
over there so we can let it die when we kill this recipe.
2015-08-07 19:23:27 +02:00
Jan Luebbe e4cc94cfd0 linux: update for sysmocom-odu
This adds kernel support for the EEPROM write-protect GPIO. Bump
linux-backports PR as well.
2015-07-31 21:09:44 +02:00
Holger Hans Peter Freyther 209666c7dd linux-sysmocom: Document upgrade issue with the kernel
The reverse dependency appears broken. Add a comment to
the recipes to warn us when updating. The issue does not
appear to exist in master of Yocto.

Related: SYS#1353
2015-07-09 09:53:11 +02:00
Holger Hans Peter Freyther 572347079f linux-sysmocom: Build with the AUFS build fix
The change of SRCREV was wrong we were supposed to build that
version but the push didn't work. It is now rebased.
2015-06-13 20:15:32 +02:00
Holger Hans Peter Freyther 8aba112988 linux-sysmocom_3.2: This is only used for the ODU remove the rest
Remove all traces of the sysmobts from this recipe as we have
not used linux-3.10 there for a very long time.
2015-06-13 19:12:15 +02:00
Holger Hans Peter Freyther e01922e39b linux-sysmocom: Correct the srcrev for 3.2.69 2015-06-13 19:10:00 +02:00
Jan Luebbe 0b5ef67cd9 linux-sysmocom: update to 3.2.69
Enable squashfs, disable OneNAND and update config.

Signed-off-by: Jan Luebbe <jluebbe@debian.org>
2015-06-13 16:50:54 +02:00
Holger Hans Peter Freyther d6bbef850f sysmobts-2050: Remove left overs from the BTS code 2015-06-13 14:52:26 +02:00
Holger Hans Peter Freyther e8989345d2 sysmobts-v1: Remove the v1 support of our old hardware config
I think the last device we sold was in 2011 and I am not aware
if anyone has used it for the last couple of years. Remove it
to lower the complexity of the builds.
2015-06-13 14:52:26 +02:00
Harald Welte 4de8fd1b08 linux-sysmocom: Add PPS platform device 2015-02-23 20:26:28 +01:00
Holger Hans Peter Freyther 703e99dee6 linux-sysmocom: Backport nfacct patches and enable the module
I have no idea if that works or not. The integration work should
have been done by someone else.

Related: ORT#650
2015-02-17 18:40:33 +01:00
Holger Hans Peter Freyther dbe4d9513a linux-sysmocom: Change defconfig to allow to use backported module
We want to use backported modules this means we need to make
some thing a module for it to work. Take Daniel's .config file,
run make savedefconfig and update our defconfig.

Related: SYS#850
2015-02-04 08:34:56 +01:00
Holger Hans Peter Freyther 7d7622db40 linux-sysmocom: Support ${S} != ${B} builds of yocto master
Go back to have our own do_configure. The kernel.bbclass would
execute "oldnoconfig" where we simply executed "oldconfig". Keep
on using our old way (for the legacy of it). E.g. with the question
how we ended up having SMP enabled in the BSC build this might
be the answer.
2014-12-26 12:21:48 +01:00
Holger Hans Peter Freyther 1e2ecae72c linux-sysmocom: Force building a new kernel after the last commit
After the defconfig was changed we should build a new kernel. Bump
the PR to force a build.
2014-12-22 15:14:18 +01:00
Harald Welte 45ed0caa79 update to recent sob-odu kernel, including v3 hardware support 2014-12-18 23:55:37 +01:00
Holger Hans Peter Freyther 29294fa7d1 linux-sysmocom: Build the watchdog into the kernel
We want to enable the watchdog in the bootloader already and
for this to be failsafe we need to have a kernel that can boot
and get ethernet without any additional modules. Now systemd
would not be able to trigger the watchdog and the system would
reboot within 60 seconds. I am not sure how the kernel upgrade
will go and we need to try this.

Related: SYS#374
2014-11-20 17:43:24 +01:00
Holger Hans Peter Freyther 98c407d28c linux-sysmocom: Another speculative compile/fetch fix for dizzy
Not specifying a branch leads to "master" being fetched. This
means we now need to specify the rightbranch. Do that depending
on what we build.
2014-11-10 09:58:03 +01:00
Holger Hans Peter Freyther cf35573837 linux-sysmocom: Remove the branch name as it breaks on dizzy
IIRC the branch name is not used in edison and it breaks in
dizzy as the commit is noth within the branch.
2014-11-10 08:50:11 +01:00
Harald Welte 0f9508c924 linux for ODU: Enable second I2C bus on UEXT connector
.. which is needed for the light sensor daughterboard.
2014-10-24 15:05:06 +02:00
Holger Hans Peter Freyther 39a927390d linux-sysmocom: Enable netfilter and advanced routing for the odu
Allow to use netfilter on the ODU.
2014-10-14 11:44:47 +02:00
Holger Hans Peter Freyther be040d7322 linux-sysmocom: Fix the building of the kernel (or hope I do) 2014-10-07 21:30:22 +02:00
Holger Hans Peter Freyther c9da6c1e1a linux-sysmocom: Fix pinmux on the ODU kernel 2014-10-07 21:18:38 +02:00
Holger Hans Peter Freyther 8d296754e7 linux-sysmocom: Upgrade ODU kernel to 3.2.63
This has only been boot tested on the Phytec development board
and not our final system. It has not been tested with USB support
2014-09-24 12:27:44 +02:00
Daniel Willmann 930665f4b1 meta-sysmocom-bsp: Update sysmocom-odu to build wireless-tools and wifi drivers 2014-09-08 18:33:01 +02:00
Holger Hans Peter Freyther e7fadd8e8e linux-sysmocom: Enable the tun device in the odu config 2014-07-18 09:58:42 +02:00
Henning Heinold 1a819714c8 linux-sysmocom: odu kernel needs CONFIG_USB_ACM
Related: SYS#294
2014-07-02 22:53:58 +02:00
Holger Hans Peter Freyther eadc4c5278 linux-sysmocom: Build 3.2.0 with patches for the ODU
The 3.2.XX kernel doesn't really work. Please see SYS#409
for details and resolution
2014-06-21 10:08:11 +02:00
Holger Hans Peter Freyther ccf7536405 linux-sysmocom: Build newer kernel for the ODU kernel
Partially Fixes: SYS#294
2014-06-09 19:46:50 +02:00
Holger Hans Peter Freyther f3117eaa22 linux-sysmocom: Enable mtdparts handling for the sysmobts-v2
We will change the MTD partitioning for our devices soon. The
kernel needs to honor the cmdline given by the kernel for that.
The rootfs will move a few pages to the back with newer bootloaders.
2014-05-19 19:13:47 +02:00
Holger Hans Peter Freyther f23a2cbd9a sysmocom-odu: Fix the u-boot and linux recipe
While the kernel resides in a dedicated kernel partition we will
still install the uImage. For u-boot we just want it to be installed.
2014-03-29 10:50:04 +01:00
Holger Hans Peter Freyther a4ff48fc44 linux: Add support for the sob-odu device
This currently requires the meta-ti layer but we will make sure
that nothing from it will be required in the end. The kernel is
based on linux-3.2 as this is the "default" TI kernel that supports
the SGX (not that we care)
2014-02-26 15:36:09 +01:00
Henning Heinold f5badb8b9e linux-sysmocom: workaround for edison, which derives git${SRCPV} from local bb_persist_data 2013-12-03 18:00:51 +01:00
Henning Heinold ccd50b5dbe linux-sysmocom: split to v3.10 and v3.2
* The Linux 3.2.X kernel has some funny issues with GCC 4.8 in the
fs/namei.c look up code. It is easier to move to 3.10 than to fully
debug the issue.

* disable the mISDN loop patch for v3.10

* use the hack to make v3.2 compilable for edison and v3.10 for dora
2013-11-27 12:25:01 +01:00