* we are the authoritative DHCP server for all local networks
* filter bogus windows DNS queries
* don't respect local resolv.conf (pointing to localhost)
* increase cache size to 1000 entries
It looks like on my tests with the sysmobts I was saved by
busybox-ifplogd executing ifup again. I couldn't figure out
the dependencies between the LSB networking service and the
tmpfiles.d interaction. So instead of winning a beauty contest
we will need to create the directory by hand.
Cause: SYS#1514
Revert "ifupdown: Package the new file as well"
This reverts commit 15dc869cda.
Revert "ifupdown: Try the workdir for the files we copied"
This reverts commit 1ef790672e.
Revert "ifupdown: Create /run/network through a tmpfiles.d"
This reverts commit e0c7f3c621.
This way the ifupdown application will not only work
for the IDU/ODU but the BTS, BSC and any other machine
we want to build.
(untested OE modification)
- the git version was choosen because it has
some fixes for newer python versions
- test where done with the test file from the github
repository and some unixsocket tests failed
Related: SYS#1082
This is a late fall-out of the priority changes done by
Henning. This recipe is not using autotools and doesn't
support src != build dir builds. So let's not use the
autotools class but simply invoke install ourselves. Let's
lower the default preference so the recipe from yocto master
is picked as well.
ERROR: Function failed: do_install (log file is located at /home/builder/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/all-poky-linux/ca-certificates/20120623-r0/temp/log.do_install.16890)
ERROR: Logfile of failure stored in: /home/builder/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/all-poky-linux/ca-certificates/20120623-r0/temp/log.do_install.16890
Log data follows:
| DEBUG: SITE files ['endian-little', 'bit-32', 'common-linux', 'common-glibc', 'allarch-linux', 'common']
| DEBUG: Executing shell function do_install
| NOTE: make -j 2 DESTDIR=/home/builder/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/all-poky-linux/ca-certificates/20120623-r0/image install
| make: *** No rule to make target `install'. Stop.
| ERROR: oe_runmake failed
| WARNING: /home/builder/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/all-poky-linux/ca-certificates/20120623-r0/temp/run.do_install.16890:1 exit 1 from
| exit 1
| ERROR: Function failed: do_install (log file is located at /home/builder/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/all-poky-linux/ca-certificates/20120623-r0/temp/log.do_install.16890)
NOTE: recipe ca-certificates-20120623-r0: task do_install: Failed
ERROR: Task 3639 (/home/builder/jenkins/workspace/Yocto-Master/label/OE/meta-sysmocom-bsp/recipes-extra/ca-certificates/ca-certificates_20120623.bb, do_install) failed with exit code '1'
The current 1:0.1+git1+019d2535b6-r9.2 is considered to be older
than the new gpsdate_0.1+git0+2326eee789-r10 file. Change the
PE to benefit from an upgrade.
The ODU has the GPSD for GNSS/GPS listening on a different
port. In hindsight this was a stupid decision but one we can
only fix once we move to generating the config of the system
at boot time.
Fixes: SYS#906
In case the port is not in a forwarding state.. don't just
give up but background and move on. This appears to be needed
for the odu to acquire a lease when STP is used.
networking.service - LSB: Raise network interfaces.
Loaded: loaded (/etc/init.d/networking)
Active: failed (Result: exit-code) since Fri 2015-02-13 17:59:17 UTC; 43s ago
Process: 54 ExecStart=/etc/init.d/networking start (code=exited, status=1/FAILURE)
Feb 13 18:04:47 sysmocom-idu networking[54]: ifup: failed to open lockfile /run
/network/.ifstate.lock: No such file or directory
The creation of /run/network occurs way too late. So we need
to look for another solution.
This reverts commit 86dda7481f.
* DHCP range for 'vlan6' onboard network 172.16.2.0/23
* DHCP range for 'native' onboard network 172.16.4.0/23
* DHCP range for 'admin' port eth1 172.16.6.0/24
* domain name vessel.sob.sysmocom.de
* listen on all interfaces, not just one
* allow admin to specify static leases (ODU) in /etc/dnsmasq.dhcp-hosts
$ ifup br0.6
would go throup _none_up of links.defn and never call the
set_environ for any of the files. Check for environ being
null and then call the set_environ function to initialize
the PATH. This is changing the semantic to allow the iface,
mode and phase to be NULL. I tried to add proper null checks
--exit-on-error is not supported by the busybox run-parts
and the easiest way is to make the ignore-errors option
the default.
I didn't test the change on the device but is looks sound.
This way we can manage bridges and vlans without additional
hacks. This package shouldn't clash with busybox so I need
to install all files with a ${BPN} suffix and then use the
update-alternatives to create the symlinks. The last two parts
were not tested/verified yet.
* the license in README has a new checksum, it now clarifies
to GPLv2
* bump the layer priority otherwise we could not use the latest version,
because the yocto layers have a higher priority
Related: SYS#732
This means that currently only Yocto Dora and Yocto Master are
being targeted. The amount of maintenance to get it to work on
Edison again is too high and it is better to focus on a systemd
only world. Remove the symlinks for yocto-edison.
A quick look and some notes from henning pointed me to wget
which is in the default layers, the sysmobts-2050 which is now
handle dby sysmobts and some older notes that are unlikely
to be addressed.
[hfreyther: We assume that the user might install OpenVPN with
a different priority but that it will always be available in the
runlevel two (e.g. even if the user changed the default runlevel)]
Related: SYS#517
I have no idea who creates the /run/openvpn directory on Debian.
The path is not in a tmpfiles.d and I don't see the generator
creating it or the service file indicating that it needs to be
created. Place the file with openvpn.NAME.status into the /run
directory which appears to work on the device.
We want to use systemd for managing the lifetime of OpenVPN. Take
the debian generator (which should work with busybox ash) and the
openvpn.service (to inhibit the sysvinit script) and the target
file and install it.
On systems that have ran "update-rc.d openvpn defaults" one need
to manually execute a systemctl enable openvpn.service. This is
not done through a post-inst script and I am not sure if we should
do it. This means there is a danger of ending with a unit that
doesn't start OpenVPN automatically after upgrade!
The scripts/packages have not been tested on a device yet.
We should use a more recent version of the OpenVPN client. Import
it from the meta-networking layer like we did before. The sysvinit
script has just minor whitespace differences and wasn't imported.
We need to test opkg upgrades of OpenVPN through the VPN. We don't
want to kill the tunnel on such upgrade.
In dora there is no autotools-brokensep bbclass. So let's just
set the build directory to the source directory ourselves. I have
not built the package for dora though/
Poky dizzy is more strict with -I/usr/include and the old
tcpdump could pick-up "/usr/bin/pcap-config" from the host
and fail. Just upgrade to a newer version of tcpdump and be
done with it.
We want to have a single image that will do the right thing on
the various BTS models we have. This means we will install the
sbts2050 utilitiy (it clashes with sysmobts-mgr anyway) and the
gpsd with a default config for it.
The sysmobts-v2 config file was for a specific usecase and is
obsolete for all intents and purposes. Make it the default
Related: SYS#559
Enabling the "systemd" feature will enable the socket activation
feature used by systemd. This way we can (re-)start the GPSD based
on the socket activation.
Henning got really confused that the "a.b.c:1234" he passed to
gps2udp showed up as "a.b.c 1234" in the kernel cmdline. Use
strdup to take a copy of it.
Fixes: SYS#424
So far we have used chrpath to fix the rpath we don't want but
this creates issues with supporting both dora and edison (we need
to depend on different recipes). Instead just force the RPATH to
be off. This can be done by setting the internal _RPATH variable.
I found this in Tool/gnulink.py.
The .pc files were already covered by the normal -dev package
glob. No need to do more work here.
Addresses:
WARNING: Variable key FILES_${PN}-dev (${includedir} ${FILES_SOLIBSDEV} ${libdir}/*.la ${libdir}/*.o ${libdir}/pkgconfig ${datadir}/pkgconfig ${datadir}/aclocal ${base_libdir}/*.o ${libdir}/${BPN}/*.la ${base_libdir}/*.la) replaces original key FILES_gpsd-dev ( ${libdir}/pkgconfdir/libgpsd.pc ${libdir}/pkgconfdir/libgps.pc).
In the sysmoBTS 2050, we want to configure the 1PPS output of the
trimble to be active only if it has at least 1 satellite in view,
and want to make the receiver output its time information in UTC,
rather than GPS time.
The sysmobts-v2 version was not installed because the file was
not called properly. Rename it to gpsd-default and the sysmobts-v2
version will be picked and installed.
GPSD 3.7 is somehow exiting without us really knowing the cause. The
version 3.9 has been released and we hope that it might just fix the
issues we are experiencing.
Harald Welte
Holger Hans Peter Freyther
Henning Heinold
Holger Hans Peter Freyther