4b1f68ae33
cifs-utils: Move it to the extras like the other extras
2014-03-29 00:17:17 +01:00
e2853d21b5
cifs-utils: Add recipe based on the 5.x recipe of meta-networking
2014-03-28 22:32:35 +01:00
d9ebe05799
u-boot: Add something that could build for the sysmocom-odu
...
We do not intend to use u-boot right now but at least this
version will build. In the first version we will use the
barebox images provided to us by the producer of the SoM.
2014-03-28 21:56:27 +01:00
2700d6a642
u-boot: Start to use spaces instead of tabs to follow OE
2014-03-28 21:55:45 +01:00
5e84042d37
u-boot: Use PV/PR again as PKGV/PKGR didn't fix the AUTOINC in the filename
2014-03-28 21:55:04 +01:00
b008109769
linux-sysmocom: We require bc-native for kernel compilation now
2014-03-28 21:36:34 +01:00
575be79d5a
osmo-bts: Fix the AGCH through PCU socket message
2014-03-27 18:13:21 +01:00
318f4e4e52
osmo-bts: Update with max_power_red fixes and apply it
...
This is fixing max_power_reduction for revC hardware and applies
a new max_power_reduction when it arrives through OML and the
system is already initialized.
2014-03-27 07:57:45 +01:00
c5e607febc
sysmocom-bsc-ip-image-directdisk: do not rename the ethernet interfaces to the new scheme
...
Fixes: SYS#277
2014-03-23 23:08:30 +01:00
c872ce4a46
osmo-bts: Provide the direct PCU mode for the image
2014-03-21 19:28:59 +01:00
599e2d3679
systemd: Update osmo-bts/osmo-pcu recipes for newer service files
...
Some smaller other fixes in the osmo-pcu code
2014-03-21 19:13:23 +01:00
5b1ebe6a26
linux-sysmocom: Local hacks to have NAT/MASQ on 3.2 and 3.10 kernels
...
The name/structure of the NAT configuration was changed. Catch up
and put the new names into the old defconfig too. It is an ugly hack
to have it work with v3.2 and v3.10 kernels. The sysmobsc has been
fixed independently.
2014-03-21 19:13:23 +01:00
e797a8ac6b
sysmobts-firmware: Make the firmware conflict with older bts software
...
We had an upgrade issue where using newer firmware with older
osmo-bts binaries didn't work. Make sure that the shiny new 0.4.0
binaries are used with firmware starting from 3.2.
Addresses: #158
2014-03-21 16:52:30 +01:00
7c453471f1
osmo-pcu: Bump version number and requirements as well
...
The interface has not knowingly changed but it is good to
have comparable versions installed.
2014-03-21 16:52:30 +01:00
9ae58a33bf
osmo-bts: Upgrade the version number to 0.4.0
2014-03-21 16:52:29 +01:00
1b769147bd
sysmocom-odu: We want things to be packaed as uImage (do we?)
2014-03-13 17:08:17 +01:00
46098bb42e
osmo-pcu: Re-build with some cosmetic and logging changes
...
Make finding use after free more easy and change some log
regions to help in detecting what is going on.
2014-03-13 17:08:11 +01:00
ce642cba53
osmo-bts: Build newer version with handover, agch and manager changes
2014-03-13 17:08:08 +01:00
2ba19d8e54
femtobts-api: Build the latest git of the header files
2014-03-13 16:48:03 +01:00
2fa4a818c7
Merge branch 'hheinold/systemd-images'
2014-03-11 18:34:52 +01:00
36d4e0119a
sysmocom-bsc-image: enable osmo-bsc for sysvinit or systemd
2014-03-11 18:34:43 +01:00
72ce4c5203
sysmocom-nitb-image: enable nitb for sysvinit or systemd
2014-03-11 18:34:43 +01:00
4a9cc7acdb
systemd_sysmocom.inc: disable flushing of journald too
...
* bump INC_PR
Fixes: SYS#262
2014-03-11 18:30:55 +01:00
305426f7cf
Merge remote-tracking branch 'hheinold/dora-kernel-bsc-upgrade'
2014-03-11 18:30:04 +01:00
6f469116e1
sysmocom-bsc-ip-image-directdisk: switch from ext3 to ext4 filesystem
2014-03-11 18:17:51 +01:00
b2a5a3a316
sysmocom-bsc: switch to kernelprovider to linux-sysmocom for dora
...
* use seperate defconfig, because of option changed from 2.6.39 to 3.10
* use python magic to switch between linux and linux-sysmocom
* add sysmocom-bsc to compatible machines for linux-sysmocom
* add new confiugration parameters for syslinux
2014-03-11 18:17:36 +01:00
98cf4f54f5
tune-geode: fix syntax for dora
2014-03-06 23:26:41 +01:00
a4ff48fc44
linux: Add support for the sob-odu device
...
This currently requires the meta-ti layer but we will make sure
that nothing from it will be required in the end. The kernel is
based on linux-3.2 as this is the "default" TI kernel that supports
the SGX (not that we care)
2014-02-26 15:36:09 +01:00
a21e9eef6b
osmo-bts: Bump the OpenBSC sha1 to see if that forces the upgrade
2014-02-21 09:25:01 +01:00
2435a67b1a
osmo-bts: Update the revision number of the osmobts
2014-02-21 09:19:48 +01:00
926d082a27
osmo-bts: Update to the handover code
2014-02-20 18:23:34 +01:00
d1c958be3e
bts2050-util: use INSANE_SKIP so bitbake does not error out
2014-02-05 16:11:34 +01:00
5aa0de1de3
osmo-bts: Upgrade to master and install the sysmobts-mgr.service
2014-02-04 13:41:45 +01:00
93953d3dd9
linux-sysmocom: Upgrade to version 3.10.28 of the kernel
...
This is the latest stable kernel. I had hoped some crashes to
go away with it but it turns out to be a compiler issue that
we backported a patch for separately.
2014-02-01 13:56:22 +01:00
5d8a24fa4f
systemd: Fix the rdepends of systemd by using a new language construct
...
We don't want to launch the dbus-daemon and we did this by modifying
the RDEPENDS_${PN}. Back then this was okay as dbus was the only
dependency but now kmod got added to the recipe as well. Use the new
language construct to just remove a specific value from the rdepends.
Paul Eggleton was nice enough to point that out.
Fixes: SYS#231
2014-01-30 15:05:30 +01:00
b606eb9bec
busybox: Enable depmod in our busybox as it is enabled in dora too
...
Make sure that there is at least a basic depmod in the image. This
is needed as fallback for kernel upgrades that execute depmod in the
postinst script. The dora busybox will always have it so we should
have it too. Sync the defconfig with dora.
Addresses: SYS#231
2014-01-30 14:50:48 +01:00
9b3893f4c1
osmo-bts: Build a new version with a crash fix on init
2014-01-23 17:21:27 +01:00
9c533b2469
linux-sysmobts: Add preferred version for 1.5.1 and simplify
...
Simplify the PREFERRED_VERSION version specification and add
dora 1.5.1 to the line.
2014-01-22 12:52:25 +01:00
4cd047788e
dora: Add 1.5.1 to the list of handled distributions
2014-01-22 12:16:46 +01:00
Harald Welte
bb35f69066
osmo-bts: Build latest version with fMaxTxPower fix
...
As a side note, this also introduces sysmobts-mgr
2014-01-22 02:02:10 +01:00
00a590e063
dvnixload: Update with the new toolchain name in place
2014-01-20 11:41:43 +01:00
c47bdcd180
osmo-bts: This requires a newer version of OpenBSC as well
2014-01-20 11:36:25 +01:00
933b68b3e8
osmo-bts: Build latest version of osmo-bts with performance changes
2014-01-20 11:24:21 +01:00
5227148e4a
osmo-pcu: Build the latest sysmocom/master code
2014-01-20 11:10:52 +01:00
456dacd6be
Merge branch 'hheinold/journald-removed'
2014-01-08 11:10:31 +01:00
f0c0ed9f6c
systemd: disable journald completely
...
* mask journald.service and socket in postinst
* change syslog.socket to observe /dev/log
* bump PRINC to 17
2014-01-08 11:10:24 +01:00
27f0ed2dc5
osmo-pcu: Update to the latest sysmocom/master version as of today
2014-01-08 10:59:55 +01:00
d6572a4b3c
osmo-pcu: add systemd support
...
The systemd-service-file was added to sysmocom/master branch so use that.
2014-01-08 10:59:19 +01:00
7b24b69422
sdk: And bump the global PR for edison
2013-12-20 14:23:08 +01:00
00ab996862
sdk: Put the femto BTS headers into the SDK as well
...
We require these header files to re-build the osmo-bts software.
2013-12-20 14:12:10 +01:00
Holger Hans Peter Freyther
Henning Heinold
Harald Welte