Holger Hans Peter Freyther
d9ebe05799
u-boot: Add something that could build for the sysmocom-odu
...
We do not intend to use u-boot right now but at least this
version will build. In the first version we will use the
barebox images provided to us by the producer of the SoM.
2014-03-28 21:56:27 +01:00
Holger Hans Peter Freyther
2700d6a642
u-boot: Start to use spaces instead of tabs to follow OE
2014-03-28 21:55:45 +01:00
Holger Hans Peter Freyther
5e84042d37
u-boot: Use PV/PR again as PKGV/PKGR didn't fix the AUTOINC in the filename
2014-03-28 21:55:04 +01:00
Holger Hans Peter Freyther
b008109769
linux-sysmocom: We require bc-native for kernel compilation now
2014-03-28 21:36:34 +01:00
Holger Hans Peter Freyther
575be79d5a
osmo-bts: Fix the AGCH through PCU socket message
2014-03-27 18:13:21 +01:00
Holger Hans Peter Freyther
318f4e4e52
osmo-bts: Update with max_power_red fixes and apply it
...
This is fixing max_power_reduction for revC hardware and applies
a new max_power_reduction when it arrives through OML and the
system is already initialized.
2014-03-27 07:57:45 +01:00
Henning Heinold
c5e607febc
sysmocom-bsc-ip-image-directdisk: do not rename the ethernet interfaces to the new scheme
...
Fixes: SYS#277
2014-03-23 23:08:30 +01:00
Holger Hans Peter Freyther
c872ce4a46
osmo-bts: Provide the direct PCU mode for the image
2014-03-21 19:28:59 +01:00
Holger Hans Peter Freyther
599e2d3679
systemd: Update osmo-bts/osmo-pcu recipes for newer service files
...
Some smaller other fixes in the osmo-pcu code
2014-03-21 19:13:23 +01:00
Holger Hans Peter Freyther
5b1ebe6a26
linux-sysmocom: Local hacks to have NAT/MASQ on 3.2 and 3.10 kernels
...
The name/structure of the NAT configuration was changed. Catch up
and put the new names into the old defconfig too. It is an ugly hack
to have it work with v3.2 and v3.10 kernels. The sysmobsc has been
fixed independently.
2014-03-21 19:13:23 +01:00
Holger Hans Peter Freyther
e797a8ac6b
sysmobts-firmware: Make the firmware conflict with older bts software
...
We had an upgrade issue where using newer firmware with older
osmo-bts binaries didn't work. Make sure that the shiny new 0.4.0
binaries are used with firmware starting from 3.2.
Addresses: #158
2014-03-21 16:52:30 +01:00
Holger Hans Peter Freyther
7c453471f1
osmo-pcu: Bump version number and requirements as well
...
The interface has not knowingly changed but it is good to
have comparable versions installed.
2014-03-21 16:52:30 +01:00
Holger Hans Peter Freyther
9ae58a33bf
osmo-bts: Upgrade the version number to 0.4.0
2014-03-21 16:52:29 +01:00
Holger Hans Peter Freyther
1b769147bd
sysmocom-odu: We want things to be packaed as uImage (do we?)
2014-03-13 17:08:17 +01:00
Holger Hans Peter Freyther
46098bb42e
osmo-pcu: Re-build with some cosmetic and logging changes
...
Make finding use after free more easy and change some log
regions to help in detecting what is going on.
2014-03-13 17:08:11 +01:00
Holger Hans Peter Freyther
ce642cba53
osmo-bts: Build newer version with handover, agch and manager changes
2014-03-13 17:08:08 +01:00
Holger Hans Peter Freyther
2ba19d8e54
femtobts-api: Build the latest git of the header files
2014-03-13 16:48:03 +01:00
Holger Hans Peter Freyther
2fa4a818c7
Merge branch 'hheinold/systemd-images'
2014-03-11 18:34:52 +01:00
Henning Heinold
36d4e0119a
sysmocom-bsc-image: enable osmo-bsc for sysvinit or systemd
2014-03-11 18:34:43 +01:00
Henning Heinold
72ce4c5203
sysmocom-nitb-image: enable nitb for sysvinit or systemd
2014-03-11 18:34:43 +01:00
Henning Heinold
4a9cc7acdb
systemd_sysmocom.inc: disable flushing of journald too
...
* bump INC_PR
Fixes: SYS#262
2014-03-11 18:30:55 +01:00
Holger Hans Peter Freyther
305426f7cf
Merge remote-tracking branch 'hheinold/dora-kernel-bsc-upgrade'
2014-03-11 18:30:04 +01:00
Henning Heinold
6f469116e1
sysmocom-bsc-ip-image-directdisk: switch from ext3 to ext4 filesystem
2014-03-11 18:17:51 +01:00
Henning Heinold
b2a5a3a316
sysmocom-bsc: switch to kernelprovider to linux-sysmocom for dora
...
* use seperate defconfig, because of option changed from 2.6.39 to 3.10
* use python magic to switch between linux and linux-sysmocom
* add sysmocom-bsc to compatible machines for linux-sysmocom
* add new confiugration parameters for syslinux
2014-03-11 18:17:36 +01:00
Henning Heinold
98cf4f54f5
tune-geode: fix syntax for dora
2014-03-06 23:26:41 +01:00
Holger Hans Peter Freyther
a4ff48fc44
linux: Add support for the sob-odu device
...
This currently requires the meta-ti layer but we will make sure
that nothing from it will be required in the end. The kernel is
based on linux-3.2 as this is the "default" TI kernel that supports
the SGX (not that we care)
2014-02-26 15:36:09 +01:00
Holger Hans Peter Freyther
a21e9eef6b
osmo-bts: Bump the OpenBSC sha1 to see if that forces the upgrade
2014-02-21 09:25:01 +01:00
Holger Hans Peter Freyther
2435a67b1a
osmo-bts: Update the revision number of the osmobts
2014-02-21 09:19:48 +01:00
Holger Hans Peter Freyther
926d082a27
osmo-bts: Update to the handover code
2014-02-20 18:23:34 +01:00
Henning Heinold
d1c958be3e
bts2050-util: use INSANE_SKIP so bitbake does not error out
2014-02-05 16:11:34 +01:00
Holger Hans Peter Freyther
5aa0de1de3
osmo-bts: Upgrade to master and install the sysmobts-mgr.service
2014-02-04 13:41:45 +01:00
Holger Hans Peter Freyther
93953d3dd9
linux-sysmocom: Upgrade to version 3.10.28 of the kernel
...
This is the latest stable kernel. I had hoped some crashes to
go away with it but it turns out to be a compiler issue that
we backported a patch for separately.
2014-02-01 13:56:22 +01:00
Holger Hans Peter Freyther
5d8a24fa4f
systemd: Fix the rdepends of systemd by using a new language construct
...
We don't want to launch the dbus-daemon and we did this by modifying
the RDEPENDS_${PN}. Back then this was okay as dbus was the only
dependency but now kmod got added to the recipe as well. Use the new
language construct to just remove a specific value from the rdepends.
Paul Eggleton was nice enough to point that out.
Fixes: SYS#231
2014-01-30 15:05:30 +01:00
Holger Hans Peter Freyther
b606eb9bec
busybox: Enable depmod in our busybox as it is enabled in dora too
...
Make sure that there is at least a basic depmod in the image. This
is needed as fallback for kernel upgrades that execute depmod in the
postinst script. The dora busybox will always have it so we should
have it too. Sync the defconfig with dora.
Addresses: SYS#231
2014-01-30 14:50:48 +01:00
Holger Hans Peter Freyther
9b3893f4c1
osmo-bts: Build a new version with a crash fix on init
2014-01-23 17:21:27 +01:00
Holger Hans Peter Freyther
9c533b2469
linux-sysmobts: Add preferred version for 1.5.1 and simplify
...
Simplify the PREFERRED_VERSION version specification and add
dora 1.5.1 to the line.
2014-01-22 12:52:25 +01:00
Holger Hans Peter Freyther
4cd047788e
dora: Add 1.5.1 to the list of handled distributions
2014-01-22 12:16:46 +01:00
Harald Welte
bb35f69066
osmo-bts: Build latest version with fMaxTxPower fix
...
As a side note, this also introduces sysmobts-mgr
2014-01-22 02:02:10 +01:00
Holger Hans Peter Freyther
00a590e063
dvnixload: Update with the new toolchain name in place
2014-01-20 11:41:43 +01:00
Holger Hans Peter Freyther
c47bdcd180
osmo-bts: This requires a newer version of OpenBSC as well
2014-01-20 11:36:25 +01:00
Holger Hans Peter Freyther
933b68b3e8
osmo-bts: Build latest version of osmo-bts with performance changes
2014-01-20 11:24:21 +01:00
Holger Hans Peter Freyther
5227148e4a
osmo-pcu: Build the latest sysmocom/master code
2014-01-20 11:10:52 +01:00
Holger Hans Peter Freyther
456dacd6be
Merge branch 'hheinold/journald-removed'
2014-01-08 11:10:31 +01:00
Henning Heinold
f0c0ed9f6c
systemd: disable journald completely
...
* mask journald.service and socket in postinst
* change syslog.socket to observe /dev/log
* bump PRINC to 17
2014-01-08 11:10:24 +01:00
Holger Hans Peter Freyther
27f0ed2dc5
osmo-pcu: Update to the latest sysmocom/master version as of today
2014-01-08 10:59:55 +01:00
Henning Heinold
d6572a4b3c
osmo-pcu: add systemd support
...
The systemd-service-file was added to sysmocom/master branch so use that.
2014-01-08 10:59:19 +01:00
Holger Hans Peter Freyther
7b24b69422
sdk: And bump the global PR for edison
2013-12-20 14:23:08 +01:00
Holger Hans Peter Freyther
00ab996862
sdk: Put the femto BTS headers into the SDK as well
...
We require these header files to re-build the osmo-bts software.
2013-12-20 14:12:10 +01:00
Holger Hans Peter Freyther
6c18f2de6c
misc: Use BBFILES += instead of an immediate assignment
...
Layers coming after us are forced to expand the DISTRO_VERSION
before it has been set. Fix that by using += instead of an immediate
assignment.
2013-12-20 14:11:20 +01:00
Henning Heinold
b0703d4440
linux-sysmocom: update dora to kernel version 3.10.24/commit 1df50cd88f6923db5705d28bbfa63a28d8d6bd66
...
* seems to fix the update-alternatives error when we saw, when updating busybox
* Fixes:SYS#184
2013-12-20 13:48:51 +01:00