u-boot/arch/powerpc/include/asm/config_mpc85xx.h

954 lines
34 KiB
C
Raw Normal View History

/*
powerpc/mpc85xx:Add BSC9131/BSC9130/BSC9231 Processor Support - BSC9131 is integrated device that targets Femto base station market. It combines Power Architecture e500v2 and DSP StarCore SC3850 core technologies with MAPLE-B2F baseband acceleration processing elements. - BSC9130 is exactly same as BSC9131 except that the max e500v2 core and DSP core frequencies are 800M(these are 1G in case of 9131). - BSC9231 is similar to BSC9131 except no MAPLE The BSC9131 SoC includes the following function and features: . Power Architecture subsystem including a e500 processor with 256-Kbyte shared L2 cache . StarCore SC3850 DSP subsystem with a 512-Kbyte private L2 cache . The Multi Accelerator Platform Engine for Femto BaseStation Baseband Processing (MAPLE-B2F) . A multi-standard baseband algorithm accelerator for Channel Decoding/Encoding, Fourier Transforms, UMTS chip rate processing, LTE UP/DL Channel processing, and CRC algorithms . Consists of accelerators for Convolution, Filtering, Turbo Encoding, Turbo Decoding, Viterbi decoding, Chiprate processing, and Matrix Inversion operations . DDR3/3L memory interface with 32-bit data width without ECC and 16-bit with ECC, up to 400-MHz clock/800 MHz data rate . Dedicated security engine featuring trusted boot . DMA controller . OCNDMA with four bidirectional channels . Interfaces . Two triple-speed Gigabit Ethernet controllers featuring network acceleration including IEEE 1588. v2 hardware support and virtualization (eTSEC) . eTSEC 1 supports RGMII/RMII . eTSEC 2 supports RGMII . High-speed USB 2.0 host and device controller with ULPI interface . Enhanced secure digital (SD/MMC) host controller (eSDHC) . Antenna interface controller (AIC), supporting three industry standard JESD207/three custom ADI RF interfaces (two dual port and one single port) and three MAXIM's MaxPHY serial interfaces . ADI lanes support both full duplex FDD support and half duplex TDD support . Universal Subscriber Identity Module (USIM) interface that facilitates communication to SIM cards or Eurochip pre-paid phone cards . TDM with one TDM port . Two DUART, four eSPI, and two I2C controllers . Integrated Flash memory controller (IFC) . TDM with 256 channels . GPIO . Sixteen 32-bit timers The DSP portion of the SoC consists of DSP core (SC3850) and various accelerators pertaining to DSP operations. This patch takes care of code pertaining to power side functionality only. Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Akhil Goyal <Akhil.Goyal@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Rajan Srivastava <rajan.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-24 20:16:49 +00:00
* Copyright 2011-2012 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _ASM_MPC85xx_CONFIG_H_
#define _ASM_MPC85xx_CONFIG_H_
/* SoC specific defines for Freescale MPC85xx (PQ3) and QorIQ processors */
#ifdef CONFIG_SYS_CCSRBAR_DEFAULT
#error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file."
#endif
/*
* This macro should be removed when we no longer care about backwards
* compatibility with older operating systems.
*/
#define CONFIG_PPC_SPINTABLE_COMPATIBLE
#include <fsl_ddrc_version.h>
#define CONFIG_SYS_FSL_DDR_BE
/* IP endianness */
#define CONFIG_SYS_FSL_IFC_BE
#define CONFIG_SYS_FSL_SEC_BE
#define CONFIG_SYS_FSL_SFP_BE
#define CONFIG_SYS_FSL_SEC_MON_BE
/* Number of TLB CAM entries we have on FSL Book-E chips */
#if defined(CONFIG_E500MC)
#define CONFIG_SYS_NUM_TLBCAMS 64
#elif defined(CONFIG_E500)
#define CONFIG_SYS_NUM_TLBCAMS 16
#endif
#if defined(CONFIG_MPC8536)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 1
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
#elif defined(CONFIG_MPC8540)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 8
#define CONFIG_SYS_FSL_DDRC_GEN1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_MPC8541)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 8
#define CONFIG_SYS_FSL_DDRC_GEN1
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_MPC8544)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 10
#define CONFIG_SYS_FSL_DDRC_GEN2
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 0
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_A005125
#elif defined(CONFIG_MPC8548)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 10
#define CONFIG_SYS_FSL_DDRC_GEN2
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 0
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
#define CONFIG_SYS_FSL_ERRATUM_NMG_LBC103
#define CONFIG_SYS_FSL_ERRATUM_NMG_ETSEC129
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_RMU
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#define CONFIG_SYS_FSL_ERRATUM_A005125
#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
#define CONFIG_SYS_FSL_A004447_SVR_REV 0x00
#elif defined(CONFIG_MPC8555)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 8
#define CONFIG_SYS_FSL_DDRC_GEN1
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_MPC8560)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 8
#define CONFIG_SYS_FSL_DDRC_GEN1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#elif defined(CONFIG_MPC8568)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 10
#define CONFIG_SYS_FSL_DDRC_GEN2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define QE_MURAM_SIZE 0x10000UL
#define MAX_QE_RISC 2
#define QE_NUM_OF_SNUM 28
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_RMU
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#elif defined(CONFIG_MPC8569)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 10
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define QE_MURAM_SIZE 0x20000UL
#define MAX_QE_RISC 4
#define QE_NUM_OF_SNUM 46
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 1
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_RMU
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
#elif defined(CONFIG_MPC8572)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_DDR_115
#define CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
#elif defined(CONFIG_P1010)
#define CONFIG_MAX_CPUS 1
#define CONFIG_FSL_SDHC_V2_3
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769
#define CONFIG_SYS_FSL_ERRATUM_P1010_A003549
#define CONFIG_SYS_FSL_ERRATUM_SEC_A003571
#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
#define CONFIG_SYS_FSL_ERRATUM_A005125
#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A007075
#define CONFIG_SYS_FSL_ERRATUM_A006261
#define CONFIG_SYS_FSL_ERRATUM_A004477
#define CONFIG_SYS_FSL_A004447_SVR_REV 0x10
#define CONFIG_ESDHC_HC_BLK_ADDR
/* P1011 is single core version of P1020 */
#elif defined(CONFIG_P1011)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
/* P1012 is single core version of P1021 */
#elif defined(CONFIG_P1012)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
/* P1013 is single core version of P1022 */
#elif defined(CONFIG_P1013)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_FSL_SATA_ERRATUM_A001
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
#elif defined(CONFIG_P1014)
#define CONFIG_MAX_CPUS 1
#define CONFIG_FSL_SDHC_V2_3
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_IFC_A002769
#define CONFIG_SYS_FSL_ERRATUM_P1010_A003549
#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
#define CONFIG_SYS_FSL_ERRATUM_A004508
/* P1017 is single core version of P1023 */
#elif defined(CONFIG_P1017)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 2
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_QMAN_NUM_PORTALS 3
#define CONFIG_SYS_BMAN_NUM_PORTALS 3
#define CONFIG_SYS_FM_MURAM_SIZE 0x10000
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
#elif defined(CONFIG_P1020)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#endif
#elif defined(CONFIG_P1021)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#elif defined(CONFIG_P1022)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_FSL_SATA_ERRATUM_A001
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
#define CONFIG_SYS_FSL_ERRATUM_A004477
#elif defined(CONFIG_P1023)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 2
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_QMAN_NUM_PORTALS 3
#define CONFIG_SYS_BMAN_NUM_PORTALS 3
#define CONFIG_SYS_FM_MURAM_SIZE 0x10000
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff600000
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
#define CONFIG_SYS_FSL_A004447_SVR_REV 0x11
/* P1024 is lower end variant of P1020 */
#elif defined(CONFIG_P1024)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
/* P1025 is lower end variant of P1021 */
#elif defined(CONFIG_P1025)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_TSECV2
#define CONFIG_FSL_PCIE_DISABLE_ASPM
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
/* P2010 is single core version of P2020 */
#elif defined(CONFIG_P2010)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
#elif defined(CONFIG_P2020)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 2
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_RMU
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#define CONFIG_SYS_FSL_ERRATUM_A004508
#define CONFIG_SYS_FSL_ERRATUM_A005125
#define CONFIG_SYS_FSL_ERRATUM_A004477
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#elif defined(CONFIG_PPC_P2041) /* also supports P2040 */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 32
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
#define CONFIG_SYS_FSL_ERRATUM_USB14
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_ERRATUM_A004510
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
#define CONFIG_SYS_FSL_ERRATUM_A004849
#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
#define CONFIG_SYS_FSL_ERRATUM_A006261
#define CONFIG_SYS_FSL_A004447_SVR_REV 0x11
#elif defined(CONFIG_PPC_P3041)
#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_5
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 32
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
#define CONFIG_SYS_FSL_ERRATUM_USB14
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_ERRATUM_A004510
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2 0x11
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
#define CONFIG_SYS_FSL_ERRATUM_A004849
#define CONFIG_SYS_FSL_ERRATUM_A005812
#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
#define CONFIG_SYS_FSL_ERRATUM_A006261
#define CONFIG_SYS_FSL_A004447_SVR_REV 0x20
#elif defined(CONFIG_PPC_P4080) /* also supports P4040 */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_MAX_CPUS 8
#define CONFIG_SYS_FSL_NUM_CC_PLLS 4
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 2
#define CONFIG_SYS_NUM_FM1_DTSEC 4
#define CONFIG_SYS_NUM_FM2_DTSEC 4
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_SYS_NUM_FM2_10GEC 1
#define CONFIG_NUM_DDR_CONTROLLERS 2
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_4
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,p4080-pcie"
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_ERRATUM_CPC_A002
#define CONFIG_SYS_FSL_ERRATUM_CPC_A003
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_ESDHC135
#define CONFIG_SYS_FSL_ERRATUM_ESDHC13
#define CONFIG_SYS_P4080_ERRATUM_CPU22
#define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
#define CONFIG_SYS_P4080_ERRATUM_SERDES8
#define CONFIG_SYS_P4080_ERRATUM_SERDES9
#define CONFIG_SYS_P4080_ERRATUM_SERDES_A001
#define CONFIG_SYS_P4080_ERRATUM_SERDES_A005
#define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_RMU
#define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM 2
#define CONFIG_SYS_FSL_ERRATUM_A004510
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x20
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000
#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
#define CONFIG_SYS_FSL_ERRATUM_A004849
#define CONFIG_SYS_FSL_ERRATUM_A004580
#define CONFIG_SYS_P4080_ERRATUM_PCIE_A003
#define CONFIG_SYS_FSL_ERRATUM_A005812
#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
#define CONFIG_SYS_FSL_ERRATUM_A007075
#define CONFIG_SYS_FSL_A004447_SVR_REV 0x20
#elif defined(CONFIG_PPC_P5020) /* also supports P5010 */
#define CONFIG_SYS_PPC64 /* 64-bit core */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_NUM_DDR_CONTROLLERS 2
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_4
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 32
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_USB14
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_ERRATUM_A004510
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xc0000000
#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
#define CONFIG_SYS_FSL_ERRATUM_A006261
#define CONFIG_SYS_FSL_A004447_SVR_REV 0x20
powerpc/85xx: Add P5040 processor support Add support for the Freescale P5040 SOC, which is similar to the P5020. Features of the P5040 are: Four P5040 single-threaded e5500 cores built Up to 2.4 GHz with 64-bit ISA support Three levels of instruction: user, supervisor, hypervisor CoreNet platform cache (CPC) 2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Up to 1600MT/s Memory pre-fetch engine DPAA incorporating acceleration for the following functions Packet parsing, classification, and distribution (FMAN) Queue management for scheduling, packet sequencing and congestion management (QMAN) Hardware buffer management for buffer allocation and de-allocation (BMAN) Cryptography acceleration (SEC 5.2) at up to 40 Gbps SerDes 20 lanes at up to 5 Gbps Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces Two 10 Gbps Ethernet MACs Ten 1 Gbps Ethernet MACs High-speed peripheral interfaces Two PCI Express 2.0/3.0 controllers Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Two I2C controllers Four UARTs Integrated flash controller supporting NAND and NOR flash DMA Dual four channel Support for hardware virtualization and partitioning enforcement Extra privileged level for hypervisor support QorIQ Trust Architecture 1.1 Secure boot, secure debug, tamper detection, volatile key storage Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-05 11:09:19 +00:00
#elif defined(CONFIG_PPC_P5040)
#define CONFIG_SYS_PPC64
powerpc/85xx: Add P5040 processor support Add support for the Freescale P5040 SOC, which is similar to the P5020. Features of the P5040 are: Four P5040 single-threaded e5500 cores built Up to 2.4 GHz with 64-bit ISA support Three levels of instruction: user, supervisor, hypervisor CoreNet platform cache (CPC) 2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Up to 1600MT/s Memory pre-fetch engine DPAA incorporating acceleration for the following functions Packet parsing, classification, and distribution (FMAN) Queue management for scheduling, packet sequencing and congestion management (QMAN) Hardware buffer management for buffer allocation and de-allocation (BMAN) Cryptography acceleration (SEC 5.2) at up to 40 Gbps SerDes 20 lanes at up to 5 Gbps Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces Two 10 Gbps Ethernet MACs Ten 1 Gbps Ethernet MACs High-speed peripheral interfaces Two PCI Express 2.0/3.0 controllers Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Two I2C controllers Four UARTs Integrated flash controller supporting NAND and NOR flash DMA Dual four channel Support for hardware virtualization and partitioning enforcement Extra privileged level for hypervisor support QorIQ Trust Architecture 1.1 Secure boot, secure debug, tamper detection, volatile key storage Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-05 11:09:19 +00:00
#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
powerpc/85xx: Add P5040 processor support Add support for the Freescale P5040 SOC, which is similar to the P5020. Features of the P5040 are: Four P5040 single-threaded e5500 cores built Up to 2.4 GHz with 64-bit ISA support Three levels of instruction: user, supervisor, hypervisor CoreNet platform cache (CPC) 2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Up to 1600MT/s Memory pre-fetch engine DPAA incorporating acceleration for the following functions Packet parsing, classification, and distribution (FMAN) Queue management for scheduling, packet sequencing and congestion management (QMAN) Hardware buffer management for buffer allocation and de-allocation (BMAN) Cryptography acceleration (SEC 5.2) at up to 40 Gbps SerDes 20 lanes at up to 5 Gbps Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces Two 10 Gbps Ethernet MACs Ten 1 Gbps Ethernet MACs High-speed peripheral interfaces Two PCI Express 2.0/3.0 controllers Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Two I2C controllers Four UARTs Integrated flash controller supporting NAND and NOR flash DMA Dual four channel Support for hardware virtualization and partitioning enforcement Extra privileged level for hypervisor support QorIQ Trust Architecture 1.1 Secure boot, secure debug, tamper detection, volatile key storage Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-05 11:09:19 +00:00
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 3
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 2
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_SYS_NUM_FM2_DTSEC 5
#define CONFIG_SYS_NUM_FM2_10GEC 1
#define CONFIG_NUM_DDR_CONTROLLERS 2
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_4
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
powerpc/85xx: Add P5040 processor support Add support for the Freescale P5040 SOC, which is similar to the P5020. Features of the P5040 are: Four P5040 single-threaded e5500 cores built Up to 2.4 GHz with 64-bit ISA support Three levels of instruction: user, supervisor, hypervisor CoreNet platform cache (CPC) 2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Up to 1600MT/s Memory pre-fetch engine DPAA incorporating acceleration for the following functions Packet parsing, classification, and distribution (FMAN) Queue management for scheduling, packet sequencing and congestion management (QMAN) Hardware buffer management for buffer allocation and de-allocation (BMAN) Cryptography acceleration (SEC 5.2) at up to 40 Gbps SerDes 20 lanes at up to 5 Gbps Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces Two 10 Gbps Ethernet MACs Ten 1 Gbps Ethernet MACs High-speed peripheral interfaces Two PCI Express 2.0/3.0 controllers Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Two I2C controllers Four UARTs Integrated flash controller supporting NAND and NOR flash DMA Dual four channel Support for hardware virtualization and partitioning enforcement Extra privileged level for hypervisor support QorIQ Trust Architecture 1.1 Secure boot, secure debug, tamper detection, volatile key storage Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-05 11:09:19 +00:00
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_USB14
powerpc/85xx: Add P5040 processor support Add support for the Freescale P5040 SOC, which is similar to the P5020. Features of the P5040 are: Four P5040 single-threaded e5500 cores built Up to 2.4 GHz with 64-bit ISA support Three levels of instruction: user, supervisor, hypervisor CoreNet platform cache (CPC) 2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Up to 1600MT/s Memory pre-fetch engine DPAA incorporating acceleration for the following functions Packet parsing, classification, and distribution (FMAN) Queue management for scheduling, packet sequencing and congestion management (QMAN) Hardware buffer management for buffer allocation and de-allocation (BMAN) Cryptography acceleration (SEC 5.2) at up to 40 Gbps SerDes 20 lanes at up to 5 Gbps Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces Two 10 Gbps Ethernet MACs Ten 1 Gbps Ethernet MACs High-speed peripheral interfaces Two PCI Express 2.0/3.0 controllers Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Two I2C controllers Four UARTs Integrated flash controller supporting NAND and NOR flash DMA Dual four channel Support for hardware virtualization and partitioning enforcement Extra privileged level for hypervisor support QorIQ Trust Architecture 1.1 Secure boot, secure debug, tamper detection, volatile key storage Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-05 11:09:19 +00:00
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
#define CONFIG_SYS_FSL_ERRATUM_A004699
#define CONFIG_SYS_FSL_ERRATUM_A004510
#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV 0x10
#define CONFIG_SYS_FSL_ERRATUM_A006261
powerpc/85xx: Add P5040 processor support Add support for the Freescale P5040 SOC, which is similar to the P5020. Features of the P5040 are: Four P5040 single-threaded e5500 cores built Up to 2.4 GHz with 64-bit ISA support Three levels of instruction: user, supervisor, hypervisor CoreNet platform cache (CPC) 2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Up to 1600MT/s Memory pre-fetch engine DPAA incorporating acceleration for the following functions Packet parsing, classification, and distribution (FMAN) Queue management for scheduling, packet sequencing and congestion management (QMAN) Hardware buffer management for buffer allocation and de-allocation (BMAN) Cryptography acceleration (SEC 5.2) at up to 40 Gbps SerDes 20 lanes at up to 5 Gbps Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces Two 10 Gbps Ethernet MACs Ten 1 Gbps Ethernet MACs High-speed peripheral interfaces Two PCI Express 2.0/3.0 controllers Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Two I2C controllers Four UARTs Integrated flash controller supporting NAND and NOR flash DMA Dual four channel Support for hardware virtualization and partitioning enforcement Extra privileged level for hypervisor support QorIQ Trust Architecture 1.1 Secure boot, secure debug, tamper detection, volatile key storage Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-05 11:09:19 +00:00
#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
#define CONFIG_SYS_FSL_ERRATUM_A005812
powerpc/85xx: Add P5040 processor support Add support for the Freescale P5040 SOC, which is similar to the P5020. Features of the P5040 are: Four P5040 single-threaded e5500 cores built Up to 2.4 GHz with 64-bit ISA support Three levels of instruction: user, supervisor, hypervisor CoreNet platform cache (CPC) 2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Up to 1600MT/s Memory pre-fetch engine DPAA incorporating acceleration for the following functions Packet parsing, classification, and distribution (FMAN) Queue management for scheduling, packet sequencing and congestion management (QMAN) Hardware buffer management for buffer allocation and de-allocation (BMAN) Cryptography acceleration (SEC 5.2) at up to 40 Gbps SerDes 20 lanes at up to 5 Gbps Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces Two 10 Gbps Ethernet MACs Ten 1 Gbps Ethernet MACs High-speed peripheral interfaces Two PCI Express 2.0/3.0 controllers Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Two I2C controllers Four UARTs Integrated flash controller supporting NAND and NOR flash DMA Dual four channel Support for hardware virtualization and partitioning enforcement Extra privileged level for hypervisor support QorIQ Trust Architecture 1.1 Secure boot, secure debug, tamper detection, volatile key storage Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-05 11:09:19 +00:00
powerpc/mpc85xx:Add BSC9131/BSC9130/BSC9231 Processor Support - BSC9131 is integrated device that targets Femto base station market. It combines Power Architecture e500v2 and DSP StarCore SC3850 core technologies with MAPLE-B2F baseband acceleration processing elements. - BSC9130 is exactly same as BSC9131 except that the max e500v2 core and DSP core frequencies are 800M(these are 1G in case of 9131). - BSC9231 is similar to BSC9131 except no MAPLE The BSC9131 SoC includes the following function and features: . Power Architecture subsystem including a e500 processor with 256-Kbyte shared L2 cache . StarCore SC3850 DSP subsystem with a 512-Kbyte private L2 cache . The Multi Accelerator Platform Engine for Femto BaseStation Baseband Processing (MAPLE-B2F) . A multi-standard baseband algorithm accelerator for Channel Decoding/Encoding, Fourier Transforms, UMTS chip rate processing, LTE UP/DL Channel processing, and CRC algorithms . Consists of accelerators for Convolution, Filtering, Turbo Encoding, Turbo Decoding, Viterbi decoding, Chiprate processing, and Matrix Inversion operations . DDR3/3L memory interface with 32-bit data width without ECC and 16-bit with ECC, up to 400-MHz clock/800 MHz data rate . Dedicated security engine featuring trusted boot . DMA controller . OCNDMA with four bidirectional channels . Interfaces . Two triple-speed Gigabit Ethernet controllers featuring network acceleration including IEEE 1588. v2 hardware support and virtualization (eTSEC) . eTSEC 1 supports RGMII/RMII . eTSEC 2 supports RGMII . High-speed USB 2.0 host and device controller with ULPI interface . Enhanced secure digital (SD/MMC) host controller (eSDHC) . Antenna interface controller (AIC), supporting three industry standard JESD207/three custom ADI RF interfaces (two dual port and one single port) and three MAXIM's MaxPHY serial interfaces . ADI lanes support both full duplex FDD support and half duplex TDD support . Universal Subscriber Identity Module (USIM) interface that facilitates communication to SIM cards or Eurochip pre-paid phone cards . TDM with one TDM port . Two DUART, four eSPI, and two I2C controllers . Integrated Flash memory controller (IFC) . TDM with 256 channels . GPIO . Sixteen 32-bit timers The DSP portion of the SoC consists of DSP core (SC3850) and various accelerators pertaining to DSP operations. This patch takes care of code pertaining to power side functionality only. Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Akhil Goyal <Akhil.Goyal@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Rajan Srivastava <rajan.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-24 20:16:49 +00:00
#elif defined(CONFIG_BSC9131)
#define CONFIG_MAX_CPUS 1
#define CONFIG_FSL_SDHC_V2_3
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_4
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 0xb0000000
#define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 0xff600000
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 3
powerpc/mpc85xx:Add BSC9131/BSC9130/BSC9231 Processor Support - BSC9131 is integrated device that targets Femto base station market. It combines Power Architecture e500v2 and DSP StarCore SC3850 core technologies with MAPLE-B2F baseband acceleration processing elements. - BSC9130 is exactly same as BSC9131 except that the max e500v2 core and DSP core frequencies are 800M(these are 1G in case of 9131). - BSC9231 is similar to BSC9131 except no MAPLE The BSC9131 SoC includes the following function and features: . Power Architecture subsystem including a e500 processor with 256-Kbyte shared L2 cache . StarCore SC3850 DSP subsystem with a 512-Kbyte private L2 cache . The Multi Accelerator Platform Engine for Femto BaseStation Baseband Processing (MAPLE-B2F) . A multi-standard baseband algorithm accelerator for Channel Decoding/Encoding, Fourier Transforms, UMTS chip rate processing, LTE UP/DL Channel processing, and CRC algorithms . Consists of accelerators for Convolution, Filtering, Turbo Encoding, Turbo Decoding, Viterbi decoding, Chiprate processing, and Matrix Inversion operations . DDR3/3L memory interface with 32-bit data width without ECC and 16-bit with ECC, up to 400-MHz clock/800 MHz data rate . Dedicated security engine featuring trusted boot . DMA controller . OCNDMA with four bidirectional channels . Interfaces . Two triple-speed Gigabit Ethernet controllers featuring network acceleration including IEEE 1588. v2 hardware support and virtualization (eTSEC) . eTSEC 1 supports RGMII/RMII . eTSEC 2 supports RGMII . High-speed USB 2.0 host and device controller with ULPI interface . Enhanced secure digital (SD/MMC) host controller (eSDHC) . Antenna interface controller (AIC), supporting three industry standard JESD207/three custom ADI RF interfaces (two dual port and one single port) and three MAXIM's MaxPHY serial interfaces . ADI lanes support both full duplex FDD support and half duplex TDD support . Universal Subscriber Identity Module (USIM) interface that facilitates communication to SIM cards or Eurochip pre-paid phone cards . TDM with one TDM port . Two DUART, four eSPI, and two I2C controllers . Integrated Flash memory controller (IFC) . TDM with 256 channels . GPIO . Sixteen 32-bit timers The DSP portion of the SoC consists of DSP core (SC3850) and various accelerators pertaining to DSP operations. This patch takes care of code pertaining to power side functionality only. Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Akhil Goyal <Akhil.Goyal@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Rajan Srivastava <rajan.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-24 20:16:49 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_NAND_FSL_IFC
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_A005125
#define CONFIG_SYS_FSL_ERRATUM_A004477
#define CONFIG_ESDHC_HC_BLK_ADDR
powerpc/mpc85xx:Add BSC9131/BSC9130/BSC9231 Processor Support - BSC9131 is integrated device that targets Femto base station market. It combines Power Architecture e500v2 and DSP StarCore SC3850 core technologies with MAPLE-B2F baseband acceleration processing elements. - BSC9130 is exactly same as BSC9131 except that the max e500v2 core and DSP core frequencies are 800M(these are 1G in case of 9131). - BSC9231 is similar to BSC9131 except no MAPLE The BSC9131 SoC includes the following function and features: . Power Architecture subsystem including a e500 processor with 256-Kbyte shared L2 cache . StarCore SC3850 DSP subsystem with a 512-Kbyte private L2 cache . The Multi Accelerator Platform Engine for Femto BaseStation Baseband Processing (MAPLE-B2F) . A multi-standard baseband algorithm accelerator for Channel Decoding/Encoding, Fourier Transforms, UMTS chip rate processing, LTE UP/DL Channel processing, and CRC algorithms . Consists of accelerators for Convolution, Filtering, Turbo Encoding, Turbo Decoding, Viterbi decoding, Chiprate processing, and Matrix Inversion operations . DDR3/3L memory interface with 32-bit data width without ECC and 16-bit with ECC, up to 400-MHz clock/800 MHz data rate . Dedicated security engine featuring trusted boot . DMA controller . OCNDMA with four bidirectional channels . Interfaces . Two triple-speed Gigabit Ethernet controllers featuring network acceleration including IEEE 1588. v2 hardware support and virtualization (eTSEC) . eTSEC 1 supports RGMII/RMII . eTSEC 2 supports RGMII . High-speed USB 2.0 host and device controller with ULPI interface . Enhanced secure digital (SD/MMC) host controller (eSDHC) . Antenna interface controller (AIC), supporting three industry standard JESD207/three custom ADI RF interfaces (two dual port and one single port) and three MAXIM's MaxPHY serial interfaces . ADI lanes support both full duplex FDD support and half duplex TDD support . Universal Subscriber Identity Module (USIM) interface that facilitates communication to SIM cards or Eurochip pre-paid phone cards . TDM with one TDM port . Two DUART, four eSPI, and two I2C controllers . Integrated Flash memory controller (IFC) . TDM with 256 channels . GPIO . Sixteen 32-bit timers The DSP portion of the SoC consists of DSP core (SC3850) and various accelerators pertaining to DSP operations. This patch takes care of code pertaining to power side functionality only. Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Akhil Goyal <Akhil.Goyal@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Rajan Srivastava <rajan.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
2012-04-24 20:16:49 +00:00
powerpc/mpc85xx: Add BSC9132/BSC9232 processor support The BSC9132 is a highly integrated device that targets the evolving Microcell, Picocell, and Enterprise-Femto base station market subsegments. The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850 core technologies with MAPLE-B2P baseband acceleration processing elements to address the need for a high performance, low cost, integrated solution that handles all required processing layers without the need for an external device except for an RF transceiver or, in a Micro base station configuration, a host device that handles the L3/L4 and handover between sectors. The BSC9132 SoC includes the following function and features: - Power Architecture subsystem including two e500 processors with 512-Kbyte shared L2 cache - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2 cache - 32 Kbyte of shared M3 memory - The Multi Accelerator Platform Engine for Pico BaseStation Baseband Processing (MAPLE-B2P) - Two DDR3/3L memory interfaces with 32-bit data width (40 bits including ECC), up to 1333 MHz data rate - Dedicated security engine featuring trusted boot - Two DMA controllers - OCNDMA with four bidirectional channels - SysDMA with sixteen bidirectional channels - Interfaces - Four-lane SerDes PHY - PCI Express controller complies with the PEX Specification-Rev 2.0 - Two Common Public Radio Interface (CPRI) controller lanes - High-speed USB 2.0 host and device controller with ULPI interface - Enhanced secure digital (SD/MMC) host controller (eSDHC) - Antenna interface controller (AIC), supporting four industry standard JESD207/four custom ADI RF interfaces - ADI lanes support both full duplex FDD support & half duplex TDD - Universal Subscriber Identity Module (USIM) interface that facilitates communication to SIM cards or Eurochip pre-paid phone cards - Two DUART, two eSPI, and two I2C controllers - Integrated Flash memory controller (IFC) - GPIO - Sixteen 32-bit timers Signed-off-by: Naveen Burmi <NaveenBurmi@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-23 17:59:57 +00:00
#elif defined(CONFIG_BSC9132)
#define CONFIG_MAX_CPUS 2
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3
#define CONFIG_FSL_SDHC_V2_3
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_TSECV2
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_NUM_DDR_CONTROLLERS 2
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_6
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_FSL_DSP_DDR_ADDR 0x40000000
#define CONFIG_SYS_FSL_DSP_M2_RAM_ADDR 0xb0000000
#define CONFIG_SYS_FSL_DSP_M3_RAM_ADDR 0xc0000000
#define CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT 0xff600000
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 3
powerpc/mpc85xx: Add BSC9132/BSC9232 processor support The BSC9132 is a highly integrated device that targets the evolving Microcell, Picocell, and Enterprise-Femto base station market subsegments. The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850 core technologies with MAPLE-B2P baseband acceleration processing elements to address the need for a high performance, low cost, integrated solution that handles all required processing layers without the need for an external device except for an RF transceiver or, in a Micro base station configuration, a host device that handles the L3/L4 and handover between sectors. The BSC9132 SoC includes the following function and features: - Power Architecture subsystem including two e500 processors with 512-Kbyte shared L2 cache - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2 cache - 32 Kbyte of shared M3 memory - The Multi Accelerator Platform Engine for Pico BaseStation Baseband Processing (MAPLE-B2P) - Two DDR3/3L memory interfaces with 32-bit data width (40 bits including ECC), up to 1333 MHz data rate - Dedicated security engine featuring trusted boot - Two DMA controllers - OCNDMA with four bidirectional channels - SysDMA with sixteen bidirectional channels - Interfaces - Four-lane SerDes PHY - PCI Express controller complies with the PEX Specification-Rev 2.0 - Two Common Public Radio Interface (CPRI) controller lanes - High-speed USB 2.0 host and device controller with ULPI interface - Enhanced secure digital (SD/MMC) host controller (eSDHC) - Antenna interface controller (AIC), supporting four industry standard JESD207/four custom ADI RF interfaces - ADI lanes support both full duplex FDD support & half duplex TDD - Universal Subscriber Identity Module (USIM) interface that facilitates communication to SIM cards or Eurochip pre-paid phone cards - Two DUART, two eSPI, and two I2C controllers - Integrated Flash memory controller (IFC) - GPIO - Sixteen 32-bit timers Signed-off-by: Naveen Burmi <NaveenBurmi@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-23 17:59:57 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_NAND_FSL_IFC
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2"
#define CONFIG_SYS_FSL_ERRATUM_A005125
#define CONFIG_SYS_FSL_ERRATUM_A005434
#define CONFIG_SYS_FSL_ERRATUM_A004477
#define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
#define CONFIG_SYS_FSL_A004447_SVR_REV 0x11
#define CONFIG_ESDHC_HC_BLK_ADDR
powerpc/mpc85xx: Add BSC9132/BSC9232 processor support The BSC9132 is a highly integrated device that targets the evolving Microcell, Picocell, and Enterprise-Femto base station market subsegments. The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850 core technologies with MAPLE-B2P baseband acceleration processing elements to address the need for a high performance, low cost, integrated solution that handles all required processing layers without the need for an external device except for an RF transceiver or, in a Micro base station configuration, a host device that handles the L3/L4 and handover between sectors. The BSC9132 SoC includes the following function and features: - Power Architecture subsystem including two e500 processors with 512-Kbyte shared L2 cache - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2 cache - 32 Kbyte of shared M3 memory - The Multi Accelerator Platform Engine for Pico BaseStation Baseband Processing (MAPLE-B2P) - Two DDR3/3L memory interfaces with 32-bit data width (40 bits including ECC), up to 1333 MHz data rate - Dedicated security engine featuring trusted boot - Two DMA controllers - OCNDMA with four bidirectional channels - SysDMA with sixteen bidirectional channels - Interfaces - Four-lane SerDes PHY - PCI Express controller complies with the PEX Specification-Rev 2.0 - Two Common Public Radio Interface (CPRI) controller lanes - High-speed USB 2.0 host and device controller with ULPI interface - Enhanced secure digital (SD/MMC) host controller (eSDHC) - Antenna interface controller (AIC), supporting four industry standard JESD207/four custom ADI RF interfaces - ADI lanes support both full duplex FDD support & half duplex TDD - Universal Subscriber Identity Module (USIM) interface that facilitates communication to SIM cards or Eurochip pre-paid phone cards - Two DUART, two eSPI, and two I2C controllers - Integrated Flash memory controller (IFC) - GPIO - Sixteen 32-bit timers Signed-off-by: Naveen Burmi <NaveenBurmi@freescale.com> Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2013-01-23 17:59:57 +00:00
#elif defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) || \
defined(CONFIG_PPC_T4080)
#define CONFIG_E6500
#define CONFIG_SYS_PPC64 /* 64-bit core */
powerpc/mpc85xx: Add T4240 SoC Add support for Freescale T4240 SoC. Feature of T4240 are (incomplete list): 12 dual-threaded e6500 cores built on Power Architecture® technology Arranged as clusters of four cores sharing a 2 MB L2 cache. Up to 1.8 GHz at 1.0 V with 64-bit ISA support (Power Architecture v2.06-compliant) Three levels of instruction: user, supervisor, and hypervisor 1.5 MB CoreNet Platform Cache (CPC) Hierarchical interconnect fabric CoreNet fabric supporting coherent and non-coherent transactions with prioritization and bandwidth allocation amongst CoreNet end-points 1.6 Tbps coherent read bandwidth Queue Manager (QMan) fabric supporting packet-level queue management and quality of service scheduling Three 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Memory prefetch engine (PMan) Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions: Packet parsing, classification, and distribution (Frame Manager 1.1) Queue management for scheduling, packet sequencing, and congestion management (Queue Manager 1.1) Hardware buffer management for buffer allocation and de-allocation (BMan 1.1) Cryptography acceleration (SEC 5.0) at up to 40 Gbps RegEx Pattern Matching Acceleration (PME 2.1) at up to 10 Gbps Decompression/Compression Acceleration (DCE 1.0) at up to 20 Gbps DPAA chip-to-chip interconnect via RapidIO Message Manager (RMAN 1.0) 32 SerDes lanes at up to 10.3125 GHz Ethernet interfaces Up to four 10 Gbps Ethernet MACs Up to sixteen 1 Gbps Ethernet MACs Maximum configuration of 4 x 10 GE + 8 x 1 GE High-speed peripheral interfaces Four PCI Express 2.0/3.0 controllers Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz with Type 11 messaging and Type 9 data streaming support Interlaken look-aside interface for serial TCAM connection Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Four I2C controllers Four 2-pin or two 4-pin UARTs Integrated Flash controller supporting NAND and NOR flash Two eight-channel DMA engines Support for hardware virtualization and partitioning enforcement QorIQ Platform's Trust Architecture 1.1 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:19 +00:00
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
powerpc/mpc85xx: Add T4240 SoC Add support for Freescale T4240 SoC. Feature of T4240 are (incomplete list): 12 dual-threaded e6500 cores built on Power Architecture® technology Arranged as clusters of four cores sharing a 2 MB L2 cache. Up to 1.8 GHz at 1.0 V with 64-bit ISA support (Power Architecture v2.06-compliant) Three levels of instruction: user, supervisor, and hypervisor 1.5 MB CoreNet Platform Cache (CPC) Hierarchical interconnect fabric CoreNet fabric supporting coherent and non-coherent transactions with prioritization and bandwidth allocation amongst CoreNet end-points 1.6 Tbps coherent read bandwidth Queue Manager (QMan) fabric supporting packet-level queue management and quality of service scheduling Three 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Memory prefetch engine (PMan) Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions: Packet parsing, classification, and distribution (Frame Manager 1.1) Queue management for scheduling, packet sequencing, and congestion management (Queue Manager 1.1) Hardware buffer management for buffer allocation and de-allocation (BMan 1.1) Cryptography acceleration (SEC 5.0) at up to 40 Gbps RegEx Pattern Matching Acceleration (PME 2.1) at up to 10 Gbps Decompression/Compression Acceleration (DCE 1.0) at up to 20 Gbps DPAA chip-to-chip interconnect via RapidIO Message Manager (RMAN 1.0) 32 SerDes lanes at up to 10.3125 GHz Ethernet interfaces Up to four 10 Gbps Ethernet MACs Up to sixteen 1 Gbps Ethernet MACs Maximum configuration of 4 x 10 GE + 8 x 1 GE High-speed peripheral interfaces Four PCI Express 2.0/3.0 controllers Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz with Type 11 messaging and Type 9 data streaming support Interlaken look-aside interface for serial TCAM connection Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Four I2C controllers Four 2-pin or two 4-pin UARTs Integrated Flash controller supporting NAND and NOR flash Two eight-channel DMA engines Support for hardware virtualization and partitioning enforcement QorIQ Platform's Trust Architecture 1.1 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:19 +00:00
#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
#ifdef CONFIG_PPC_T4240
powerpc/mpc85xx: Add T4240 SoC Add support for Freescale T4240 SoC. Feature of T4240 are (incomplete list): 12 dual-threaded e6500 cores built on Power Architecture® technology Arranged as clusters of four cores sharing a 2 MB L2 cache. Up to 1.8 GHz at 1.0 V with 64-bit ISA support (Power Architecture v2.06-compliant) Three levels of instruction: user, supervisor, and hypervisor 1.5 MB CoreNet Platform Cache (CPC) Hierarchical interconnect fabric CoreNet fabric supporting coherent and non-coherent transactions with prioritization and bandwidth allocation amongst CoreNet end-points 1.6 Tbps coherent read bandwidth Queue Manager (QMan) fabric supporting packet-level queue management and quality of service scheduling Three 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Memory prefetch engine (PMan) Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions: Packet parsing, classification, and distribution (Frame Manager 1.1) Queue management for scheduling, packet sequencing, and congestion management (Queue Manager 1.1) Hardware buffer management for buffer allocation and de-allocation (BMan 1.1) Cryptography acceleration (SEC 5.0) at up to 40 Gbps RegEx Pattern Matching Acceleration (PME 2.1) at up to 10 Gbps Decompression/Compression Acceleration (DCE 1.0) at up to 20 Gbps DPAA chip-to-chip interconnect via RapidIO Message Manager (RMAN 1.0) 32 SerDes lanes at up to 10.3125 GHz Ethernet interfaces Up to four 10 Gbps Ethernet MACs Up to sixteen 1 Gbps Ethernet MACs Maximum configuration of 4 x 10 GE + 8 x 1 GE High-speed peripheral interfaces Four PCI Express 2.0/3.0 controllers Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz with Type 11 messaging and Type 9 data streaming support Interlaken look-aside interface for serial TCAM connection Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Four I2C controllers Four 2-pin or two 4-pin UARTs Integrated Flash controller supporting NAND and NOR flash Two eight-channel DMA engines Support for hardware virtualization and partitioning enforcement QorIQ Platform's Trust Architecture 1.1 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:19 +00:00
#define CONFIG_MAX_CPUS 12
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 4 }
powerpc/mpc85xx: Add T4240 SoC Add support for Freescale T4240 SoC. Feature of T4240 are (incomplete list): 12 dual-threaded e6500 cores built on Power Architecture® technology Arranged as clusters of four cores sharing a 2 MB L2 cache. Up to 1.8 GHz at 1.0 V with 64-bit ISA support (Power Architecture v2.06-compliant) Three levels of instruction: user, supervisor, and hypervisor 1.5 MB CoreNet Platform Cache (CPC) Hierarchical interconnect fabric CoreNet fabric supporting coherent and non-coherent transactions with prioritization and bandwidth allocation amongst CoreNet end-points 1.6 Tbps coherent read bandwidth Queue Manager (QMan) fabric supporting packet-level queue management and quality of service scheduling Three 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving support Memory prefetch engine (PMan) Data Path Acceleration Architecture (DPAA) incorporating acceleration for the following functions: Packet parsing, classification, and distribution (Frame Manager 1.1) Queue management for scheduling, packet sequencing, and congestion management (Queue Manager 1.1) Hardware buffer management for buffer allocation and de-allocation (BMan 1.1) Cryptography acceleration (SEC 5.0) at up to 40 Gbps RegEx Pattern Matching Acceleration (PME 2.1) at up to 10 Gbps Decompression/Compression Acceleration (DCE 1.0) at up to 20 Gbps DPAA chip-to-chip interconnect via RapidIO Message Manager (RMAN 1.0) 32 SerDes lanes at up to 10.3125 GHz Ethernet interfaces Up to four 10 Gbps Ethernet MACs Up to sixteen 1 Gbps Ethernet MACs Maximum configuration of 4 x 10 GE + 8 x 1 GE High-speed peripheral interfaces Four PCI Express 2.0/3.0 controllers Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz with Type 11 messaging and Type 9 data streaming support Interlaken look-aside interface for serial TCAM connection Additional peripheral interfaces Two serial ATA (SATA 2.0) controllers Two high-speed USB 2.0 controllers with integrated PHY Enhanced secure digital host controller (SD/MMC/eMMC) Enhanced serial peripheral interface (eSPI) Four I2C controllers Four 2-pin or two 4-pin UARTs Integrated Flash controller supporting NAND and NOR flash Two eight-channel DMA engines Support for hardware virtualization and partitioning enforcement QorIQ Platform's Trust Architecture 1.1 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:19 +00:00
#define CONFIG_SYS_NUM_FM1_DTSEC 8
#define CONFIG_SYS_NUM_FM1_10GEC 2
#define CONFIG_SYS_NUM_FM2_DTSEC 8
#define CONFIG_SYS_NUM_FM2_10GEC 2
#define CONFIG_NUM_DDR_CONTROLLERS 3
#else
#define CONFIG_SYS_NUM_FM1_DTSEC 6
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_SYS_NUM_FM2_DTSEC 8
#define CONFIG_SYS_NUM_FM2_10GEC 1
#define CONFIG_NUM_DDR_CONTROLLERS 2
#if defined(CONFIG_PPC_T4160)
#define CONFIG_MAX_CPUS 8
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1 }
#elif defined(CONFIG_PPC_T4080)
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1 }
#endif
#endif
#define CONFIG_SYS_FSL_NUM_CC_PLLS 5
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SRDS_1
#define CONFIG_SYS_FSL_SRDS_2
#define CONFIG_SYS_FSL_SRDS_3
#define CONFIG_SYS_FSL_SRDS_4
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 2
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_SYS_PME_CLK 0
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_FM1_CLK 3
#define CONFIG_SYS_FM2_CLK 3
#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v3.0"
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_SRIO_LIODN
#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_A004468
#define CONFIG_SYS_FSL_ERRATUM_A_004934
#define CONFIG_SYS_FSL_ERRATUM_A005871
#define CONFIG_SYS_FSL_ERRATUM_A006261
#define CONFIG_SYS_FSL_ERRATUM_A006379
#define CONFIG_SYS_FSL_ERRATUM_A007186
#define CONFIG_SYS_FSL_ERRATUM_A006593
#define CONFIG_SYS_FSL_ERRATUM_A007798
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_SFP_VER_3_0
#define CONFIG_SYS_FSL_PCI_VER_3_X
#elif defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_B4420)
#define CONFIG_E6500
#define CONFIG_SYS_PPC64 /* 64-bit core */
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
2015-01-19 07:16:54 +00:00
#define CONFIG_HETROGENOUS_CLUSTERS /* DSP/SC3900 core clusters */
#define CONFIG_PPC_CLUSTER_START 0 /*Start index of ppc clusters*/
#define CONFIG_DSP_CLUSTER_START 1 /*Start index of dsp clusters*/
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SRDS_1
#define CONFIG_SYS_FSL_SRDS_2
2015-01-19 07:16:54 +00:00
#define CONFIG_SYS_MAPLE
#define CONFIG_SYS_CPRI
#define CONFIG_SYS_FSL_NUM_CC_PLLS 5
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
#define CONFIG_SYS_FM1_CLK 0
2015-01-19 07:16:54 +00:00
#define CONFIG_SYS_CPRI_CLK 3
#define CONFIG_SYS_ULB_CLK 4
#define CONFIG_SYS_ETVPE_CLK 1
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_FM_MURAM_SIZE 0x60000
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
#define CONFIG_SYS_FSL_ERRATUM_A_004934
#define CONFIG_SYS_FSL_ERRATUM_A005871
#define CONFIG_SYS_FSL_ERRATUM_A006379
#define CONFIG_SYS_FSL_ERRATUM_A007186
#define CONFIG_SYS_FSL_ERRATUM_A006593
#define CONFIG_SYS_FSL_ERRATUM_A007075
#define CONFIG_SYS_FSL_ERRATUM_A006475
#define CONFIG_SYS_FSL_ERRATUM_A006384
#define CONFIG_SYS_FSL_ERRATUM_A007212
#define CONFIG_SYS_FSL_ERRATUM_A004477
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_SFP_VER_3_0
#ifdef CONFIG_PPC_B4860
#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
powerpc/mpc85xx: Add B4860 and variant SoCs Add support for Freescale B4860 and variant SoCs. Features of B4860 are (incomplete list): Six fully-programmable StarCore SC3900 FVP subsystems, divided into three clusters-each core runs up to 1.2 GHz, with an architecture highly optimized for wireless base station applications Four dual-thread e6500 Power Architecture processors organized in one cluster-each core runs up to 1.8 GHz Two DDR3/3L controllers for high-speed, industry-standard memory interface each runs at up to 1866.67 MHz MAPLE-B3 hardware acceleration-for forward error correction schemes including Turbo or Viterbi decoding, Turbo encoding and rate matching, MIMO MMSE equalization scheme, matrix operations, CRC insertion and check, DFT/iDFT and FFT/iFFT calculations, PUSCH/PDSCH acceleration, and UMTS chip rate acceleration CoreNet fabric that fully supports coherency using MESI protocol between the e6500 cores, SC3900 FVP cores, memories and external interfaces. CoreNet fabric interconnect runs at 667 MHz and supports coherent and non-coherent out of order transactions with prioritization and bandwidth allocation amongst CoreNet endpoints. Data Path Acceleration Architecture, which includes the following: Frame Manager (FMan), which supports in-line packet parsing and general classification to enable policing and QoS-based packet distribution Queue Manager (QMan) and Buffer Manager (BMan), which allow offloading of queue management, task management, load distribution, flow ordering, buffer management, and allocation tasks from the cores Security engine (SEC 5.3)-crypto-acceleration for protocols such as IPsec, SSL, and 802.16 RapidIO manager (RMAN) - Support SRIO types 8, 9, 10, and 11 (inbound and outbound). Supports types 5, 6 (outbound only) Large internal cache memory with snooping and stashing capabilities for bandwidth saving and high utilization of processor elements. The 9856-Kbyte internal memory space includes the following: 32 Kbyte L1 ICache per e6500/SC3900 core 32 Kbyte L1 DCache per e6500/SC3900 core 2048 Kbyte unified L2 cache for each SC3900 FVP cluster 2048 Kbyte unified L2 cache for the e6500 cluster Two 512 Kbyte shared L3 CoreNet platform caches (CPC) Sixteen 10-GHz SerDes lanes serving: Two Serial RapidIO interfaces. Each supports up to 4 lanes and a total of up to 8 lanes Up to 8-lanes Common Public Radio Interface (CPRI) controller for glue- less antenna connection Two 10-Gbit Ethernet controllers (10GEC) Six 1G/2.5-Gbit Ethernet controllers for network communications PCI Express controller Debug (Aurora) Two OCeaN DMAs Various system peripherals 182 32-bit timers Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:20 +00:00
#define CONFIG_MAX_CPUS 4
2015-01-19 07:16:54 +00:00
#define CONFIG_MAX_DSP_CPUS 12
#define CONFIG_NUM_DSP_CPUS 6
#define CONFIG_SYS_FSL_SRDS_NUM_PLLS 2
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 4, 4, 4 }
powerpc/mpc85xx: Add B4860 and variant SoCs Add support for Freescale B4860 and variant SoCs. Features of B4860 are (incomplete list): Six fully-programmable StarCore SC3900 FVP subsystems, divided into three clusters-each core runs up to 1.2 GHz, with an architecture highly optimized for wireless base station applications Four dual-thread e6500 Power Architecture processors organized in one cluster-each core runs up to 1.8 GHz Two DDR3/3L controllers for high-speed, industry-standard memory interface each runs at up to 1866.67 MHz MAPLE-B3 hardware acceleration-for forward error correction schemes including Turbo or Viterbi decoding, Turbo encoding and rate matching, MIMO MMSE equalization scheme, matrix operations, CRC insertion and check, DFT/iDFT and FFT/iFFT calculations, PUSCH/PDSCH acceleration, and UMTS chip rate acceleration CoreNet fabric that fully supports coherency using MESI protocol between the e6500 cores, SC3900 FVP cores, memories and external interfaces. CoreNet fabric interconnect runs at 667 MHz and supports coherent and non-coherent out of order transactions with prioritization and bandwidth allocation amongst CoreNet endpoints. Data Path Acceleration Architecture, which includes the following: Frame Manager (FMan), which supports in-line packet parsing and general classification to enable policing and QoS-based packet distribution Queue Manager (QMan) and Buffer Manager (BMan), which allow offloading of queue management, task management, load distribution, flow ordering, buffer management, and allocation tasks from the cores Security engine (SEC 5.3)-crypto-acceleration for protocols such as IPsec, SSL, and 802.16 RapidIO manager (RMAN) - Support SRIO types 8, 9, 10, and 11 (inbound and outbound). Supports types 5, 6 (outbound only) Large internal cache memory with snooping and stashing capabilities for bandwidth saving and high utilization of processor elements. The 9856-Kbyte internal memory space includes the following: 32 Kbyte L1 ICache per e6500/SC3900 core 32 Kbyte L1 DCache per e6500/SC3900 core 2048 Kbyte unified L2 cache for each SC3900 FVP cluster 2048 Kbyte unified L2 cache for the e6500 cluster Two 512 Kbyte shared L3 CoreNet platform caches (CPC) Sixteen 10-GHz SerDes lanes serving: Two Serial RapidIO interfaces. Each supports up to 4 lanes and a total of up to 8 lanes Up to 8-lanes Common Public Radio Interface (CPRI) controller for glue- less antenna connection Two 10-Gbit Ethernet controllers (10GEC) Six 1G/2.5-Gbit Ethernet controllers for network communications PCI Express controller Debug (Aurora) Two OCeaN DMAs Various system peripherals 182 32-bit timers Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:20 +00:00
#define CONFIG_SYS_NUM_FM1_DTSEC 6
#define CONFIG_SYS_NUM_FM1_10GEC 2
#define CONFIG_NUM_DDR_CONTROLLERS 2
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
powerpc/mpc85xx: Add B4860 and variant SoCs Add support for Freescale B4860 and variant SoCs. Features of B4860 are (incomplete list): Six fully-programmable StarCore SC3900 FVP subsystems, divided into three clusters-each core runs up to 1.2 GHz, with an architecture highly optimized for wireless base station applications Four dual-thread e6500 Power Architecture processors organized in one cluster-each core runs up to 1.8 GHz Two DDR3/3L controllers for high-speed, industry-standard memory interface each runs at up to 1866.67 MHz MAPLE-B3 hardware acceleration-for forward error correction schemes including Turbo or Viterbi decoding, Turbo encoding and rate matching, MIMO MMSE equalization scheme, matrix operations, CRC insertion and check, DFT/iDFT and FFT/iFFT calculations, PUSCH/PDSCH acceleration, and UMTS chip rate acceleration CoreNet fabric that fully supports coherency using MESI protocol between the e6500 cores, SC3900 FVP cores, memories and external interfaces. CoreNet fabric interconnect runs at 667 MHz and supports coherent and non-coherent out of order transactions with prioritization and bandwidth allocation amongst CoreNet endpoints. Data Path Acceleration Architecture, which includes the following: Frame Manager (FMan), which supports in-line packet parsing and general classification to enable policing and QoS-based packet distribution Queue Manager (QMan) and Buffer Manager (BMan), which allow offloading of queue management, task management, load distribution, flow ordering, buffer management, and allocation tasks from the cores Security engine (SEC 5.3)-crypto-acceleration for protocols such as IPsec, SSL, and 802.16 RapidIO manager (RMAN) - Support SRIO types 8, 9, 10, and 11 (inbound and outbound). Supports types 5, 6 (outbound only) Large internal cache memory with snooping and stashing capabilities for bandwidth saving and high utilization of processor elements. The 9856-Kbyte internal memory space includes the following: 32 Kbyte L1 ICache per e6500/SC3900 core 32 Kbyte L1 DCache per e6500/SC3900 core 2048 Kbyte unified L2 cache for each SC3900 FVP cluster 2048 Kbyte unified L2 cache for the e6500 cluster Two 512 Kbyte shared L3 CoreNet platform caches (CPC) Sixteen 10-GHz SerDes lanes serving: Two Serial RapidIO interfaces. Each supports up to 4 lanes and a total of up to 8 lanes Up to 8-lanes Common Public Radio Interface (CPRI) controller for glue- less antenna connection Two 10-Gbit Ethernet controllers (10GEC) Six 1G/2.5-Gbit Ethernet controllers for network communications PCI Express controller Debug (Aurora) Two OCeaN DMAs Various system peripherals 182 32-bit timers Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:20 +00:00
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#define CONFIG_SYS_FSL_SRIO_LIODN
#else
#define CONFIG_MAX_CPUS 2
2015-01-19 07:16:54 +00:00
#define CONFIG_MAX_DSP_CPUS 2
#define CONFIG_SYS_FSL_SRDS_NUM_PLLS 1
#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 2
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 4 }
#define CONFIG_SYS_NUM_FM1_DTSEC 4
#define CONFIG_SYS_NUM_FM1_10GEC 0
#define CONFIG_NUM_DDR_CONTROLLERS 1
#endif
powerpc/mpc85xx: Add B4860 and variant SoCs Add support for Freescale B4860 and variant SoCs. Features of B4860 are (incomplete list): Six fully-programmable StarCore SC3900 FVP subsystems, divided into three clusters-each core runs up to 1.2 GHz, with an architecture highly optimized for wireless base station applications Four dual-thread e6500 Power Architecture processors organized in one cluster-each core runs up to 1.8 GHz Two DDR3/3L controllers for high-speed, industry-standard memory interface each runs at up to 1866.67 MHz MAPLE-B3 hardware acceleration-for forward error correction schemes including Turbo or Viterbi decoding, Turbo encoding and rate matching, MIMO MMSE equalization scheme, matrix operations, CRC insertion and check, DFT/iDFT and FFT/iFFT calculations, PUSCH/PDSCH acceleration, and UMTS chip rate acceleration CoreNet fabric that fully supports coherency using MESI protocol between the e6500 cores, SC3900 FVP cores, memories and external interfaces. CoreNet fabric interconnect runs at 667 MHz and supports coherent and non-coherent out of order transactions with prioritization and bandwidth allocation amongst CoreNet endpoints. Data Path Acceleration Architecture, which includes the following: Frame Manager (FMan), which supports in-line packet parsing and general classification to enable policing and QoS-based packet distribution Queue Manager (QMan) and Buffer Manager (BMan), which allow offloading of queue management, task management, load distribution, flow ordering, buffer management, and allocation tasks from the cores Security engine (SEC 5.3)-crypto-acceleration for protocols such as IPsec, SSL, and 802.16 RapidIO manager (RMAN) - Support SRIO types 8, 9, 10, and 11 (inbound and outbound). Supports types 5, 6 (outbound only) Large internal cache memory with snooping and stashing capabilities for bandwidth saving and high utilization of processor elements. The 9856-Kbyte internal memory space includes the following: 32 Kbyte L1 ICache per e6500/SC3900 core 32 Kbyte L1 DCache per e6500/SC3900 core 2048 Kbyte unified L2 cache for each SC3900 FVP cluster 2048 Kbyte unified L2 cache for the e6500 cluster Two 512 Kbyte shared L3 CoreNet platform caches (CPC) Sixteen 10-GHz SerDes lanes serving: Two Serial RapidIO interfaces. Each supports up to 4 lanes and a total of up to 8 lanes Up to 8-lanes Common Public Radio Interface (CPRI) controller for glue- less antenna connection Two 10-Gbit Ethernet controllers (10GEC) Six 1G/2.5-Gbit Ethernet controllers for network communications PCI Express controller Debug (Aurora) Two OCeaN DMAs Various system peripherals 182 32-bit timers Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
2012-10-08 07:44:20 +00:00
#elif defined(CONFIG_PPC_T1040) || defined(CONFIG_PPC_T1042) ||\
defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define CONFIG_E5500
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 1
#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
#ifdef CONFIG_SYS_FSL_DDR4
#define CONFIG_SYS_FSL_DDRC_GEN4
#endif
#if defined(CONFIG_PPC_T1040) || defined(CONFIG_PPC_T1042)
#define CONFIG_MAX_CPUS 4
#elif defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define CONFIG_MAX_CPUS 2
#endif
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 1, 1 }
#define CONFIG_SYS_FSL_NUM_LAWS 16
#define CONFIG_SYS_FSL_SRDS_1
#define CONFIG_SYS_FSL_SEC_COMPAT 5
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 5
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_PME_PLAT_CLK_DIV 2
#define CONFIG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
#define CONFIG_SYS_FSL_ERRATUM_A008044
#define CONFIG_SYS_FMAN_V3
#define CONFIG_FM_PLAT_CLK_DIV 1
#define CONFIG_SYS_FM1_CLK CONFIG_FM_PLAT_CLK_DIV
#define CONFIG_SYS_SDHC_CLK 0/* Select SDHC CLK begining from PLL1
per rcw field value */
#define CONFIG_SYS_SDHC_CLK_2_PLL /* Select SDHC CLK from 2 PLLs */
#define CONFIG_SYS_FM_MURAM_SIZE 0x30000
#define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_A006261
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
#define CONFIG_SYS_FSL_SFP_VER_3_0
powerpc/mpc85xx: Add T1024/T1023 SoC support Add support for Freescale T1024/T1023 SoC. The T1024 SoC includes the following function and features: - Two 64-bit Power architecture e5500 cores, up to 1.4GHz - private 256KB L2 cache each core and shared 256KB CoreNet platform cache (CPC) - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Data Path Acceleration Architecture (DPAA) incorporating acceleration - Four MAC for 1G/2.5G/10G network interfaces (RGMII, SGMII, QSGMII, XFI) - High-speed peripheral interfaces - Three PCI Express 2.0 controllers - Additional peripheral interfaces - One SATA 2.0 controller - Two USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/eSDHC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Two 8-channel DMA engines - Multicore programmable interrupt controller (PIC) - LCD interface (DIU) with 12 bit dual data rate - QUICC Engine block supporting TDM, HDLC, and UART - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 Differences between T1024 and T1023: Feature T1024 T1023 QUICC Engine: yes no DIU: yes no Deep Sleep: yes no I2C controller: 4 3 DDR: 64-bit 32-bit IFC: 32-bit 28-bit Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-24 09:11:54 +00:00
#elif defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023) ||\
defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
#define CONFIG_E5500
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 1
#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */
#define CONFIG_SYS_FMAN_V3
#ifdef CONFIG_SYS_FSL_DDR4
#define CONFIG_SYS_FSL_DDRC_GEN4
#endif
#if defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023)
#define CONFIG_MAX_CPUS 2
#elif defined(CONFIG_PPC_T1014) || defined(CONFIG_PPC_T1013)
#define CONFIG_MAX_CPUS 1
#endif
#define CONFIG_SYS_FSL_NUM_CC_PLL 2
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1, 1, 1 }
#define CONFIG_SYS_FSL_NUM_LAWS 16
#define CONFIG_SYS_FSL_SRDS_1
#define CONFIG_SYS_FSL_SEC_COMPAT 5
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_NUM_FM1_DTSEC 4
#define CONFIG_SYS_NUM_FM1_10GEC 1
#define CONFIG_FSL_FM_10GEC_REGULAR_NOTATION
powerpc/mpc85xx: Add T1024/T1023 SoC support Add support for Freescale T1024/T1023 SoC. The T1024 SoC includes the following function and features: - Two 64-bit Power architecture e5500 cores, up to 1.4GHz - private 256KB L2 cache each core and shared 256KB CoreNet platform cache (CPC) - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Data Path Acceleration Architecture (DPAA) incorporating acceleration - Four MAC for 1G/2.5G/10G network interfaces (RGMII, SGMII, QSGMII, XFI) - High-speed peripheral interfaces - Three PCI Express 2.0 controllers - Additional peripheral interfaces - One SATA 2.0 controller - Two USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/eSDHC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Two 8-channel DMA engines - Multicore programmable interrupt controller (PIC) - LCD interface (DIU) with 12 bit dual data rate - QUICC Engine block supporting TDM, HDLC, and UART - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 Differences between T1024 and T1023: Feature T1024 T1023 QUICC Engine: yes no DIU: yes no Deep Sleep: yes no I2C controller: 4 3 DDR: 64-bit 32-bit IFC: 32-bit 28-bit Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-24 09:11:54 +00:00
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
#define CONFIG_SYS_FM1_CLK 0
#define CONFIG_SYS_SDHC_CLK 0/* Select SDHC CLK begining from PLL1
per rcw field value */
powerpc/mpc85xx: Add T1024/T1023 SoC support Add support for Freescale T1024/T1023 SoC. The T1024 SoC includes the following function and features: - Two 64-bit Power architecture e5500 cores, up to 1.4GHz - private 256KB L2 cache each core and shared 256KB CoreNet platform cache (CPC) - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support - Data Path Acceleration Architecture (DPAA) incorporating acceleration - Four MAC for 1G/2.5G/10G network interfaces (RGMII, SGMII, QSGMII, XFI) - High-speed peripheral interfaces - Three PCI Express 2.0 controllers - Additional peripheral interfaces - One SATA 2.0 controller - Two USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/eSDHC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Two 8-channel DMA engines - Multicore programmable interrupt controller (PIC) - LCD interface (DIU) with 12 bit dual data rate - QUICC Engine block supporting TDM, HDLC, and UART - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB) - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 Differences between T1024 and T1023: Feature T1024 T1023 QUICC Engine: yes no DIU: yes no Deep Sleep: yes no I2C controller: 4 3 DDR: 64-bit 32-bit IFC: 32-bit 28-bit Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
2014-11-24 09:11:54 +00:00
#define CONFIG_QBMAN_CLK_DIV 1
#define CONFIG_SYS_FM_MURAM_SIZE 0x30000
#define CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.4"
#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
#define QE_MURAM_SIZE 0x6000UL
#define MAX_QE_RISC 1
#define QE_NUM_OF_SNUM 28
#define CONFIG_SYS_FSL_SFP_VER_3_0
powerpc/mpc85xx: Add T2080/T2081 SoC support Add support for Freescale T2080/T2081 SoC. T2080 includes the following functions and features: - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz - 2MB L2 cache and 512KB CoreNet platform cache (CPC) - Hierarchical interconnect fabric - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving - Data Path Acceleration Architecture (DPAA) incorporating acceleration - 16 SerDes lanes up to 10.3125 GHz - 8 mEMACs for network interfaces (four 1Gbps MACs and four 10Gbps/1Gbps MACs) - High-speed peripheral interfaces - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV) - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz - Additional peripheral interfaces - Two serial ATA (SATA 2.0) controllers - Two high-speed USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Three eight-channel DMA engines - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 Differences between T2080 and T2081: Feature T2080 T2081 1G Ethernet numbers: 8 6 10G Ethernet numbers: 4 2 SerDes lanes: 16 8 Serial RapidIO,RMan: 2 no SATA Controller: 2 no Aurora: yes no SoC Package: 896-pins 780-pins Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-11-22 09:39:10 +00:00
#elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
#define CONFIG_E6500
#define CONFIG_SYS_PPC64 /* 64-bit core */
#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */
#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */
#define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
#define CONFIG_SYS_FSL_NUM_CC_PLLS 2
#define CONFIG_SYS_FSL_QMAN_V3
#define CONFIG_MAX_CPUS 4
#define CONFIG_SYS_FSL_NUM_LAWS 32
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#define CONFIG_SYS_NUM_FMAN 1
#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 4, 4, 4 }
#define CONFIG_SYS_FSL_SRDS_1
#define CONFIG_SYS_FSL_PCI_VER_3_X
#if defined(CONFIG_PPC_T2080)
#define CONFIG_SYS_NUM_FM1_DTSEC 8
#define CONFIG_SYS_NUM_FM1_10GEC 4
#define CONFIG_SYS_FSL_SRDS_2
#define CONFIG_SYS_FSL_SRIO_LIODN
#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2
#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9
#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5
#elif defined(CONFIG_PPC_T2081)
#define CONFIG_SYS_NUM_FM1_DTSEC 6
#define CONFIG_SYS_NUM_FM1_10GEC 2
#endif
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
powerpc/mpc85xx: Add T2080/T2081 SoC support Add support for Freescale T2080/T2081 SoC. T2080 includes the following functions and features: - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz - 2MB L2 cache and 512KB CoreNet platform cache (CPC) - Hierarchical interconnect fabric - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving - Data Path Acceleration Architecture (DPAA) incorporating acceleration - 16 SerDes lanes up to 10.3125 GHz - 8 mEMACs for network interfaces (four 1Gbps MACs and four 10Gbps/1Gbps MACs) - High-speed peripheral interfaces - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV) - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz - Additional peripheral interfaces - Two serial ATA (SATA 2.0) controllers - Two high-speed USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Three eight-channel DMA engines - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 Differences between T2080 and T2081: Feature T2080 T2081 1G Ethernet numbers: 8 6 10G Ethernet numbers: 4 2 SerDes lanes: 16 8 Serial RapidIO,RMan: 2 no SATA Controller: 2 no Aurora: yes no SoC Package: 896-pins 780-pins Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-11-22 09:39:10 +00:00
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_PME_PLAT_CLK_DIV 1
#define CONFIG_SYS_PME_CLK CONFIG_PME_PLAT_CLK_DIV
#define CONFIG_SYS_FM1_CLK 0
#define CONFIG_SYS_SDHC_CLK 1/* Select SDHC CLK begining from PLL2
per rcw field value */
#define CONFIG_SYS_SDHC_CLK_2_PLL /* Select SDHC CLK from 2 PLLs */
powerpc/mpc85xx: Add T2080/T2081 SoC support Add support for Freescale T2080/T2081 SoC. T2080 includes the following functions and features: - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz - 2MB L2 cache and 512KB CoreNet platform cache (CPC) - Hierarchical interconnect fabric - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving - Data Path Acceleration Architecture (DPAA) incorporating acceleration - 16 SerDes lanes up to 10.3125 GHz - 8 mEMACs for network interfaces (four 1Gbps MACs and four 10Gbps/1Gbps MACs) - High-speed peripheral interfaces - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV) - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz - Additional peripheral interfaces - Two serial ATA (SATA 2.0) controllers - Two high-speed USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Three eight-channel DMA engines - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 Differences between T2080 and T2081: Feature T2080 T2081 1G Ethernet numbers: 8 6 10G Ethernet numbers: 4 2 SerDes lanes: 16 8 Serial RapidIO,RMan: 2 no SATA Controller: 2 no Aurora: yes no SoC Package: 896-pins 780-pins Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-11-22 09:39:10 +00:00
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
#define CONFIG_SYS_FMAN_V3
#define CONFIG_SYS_FM_MURAM_SIZE 0x28000
#define CONFIG_SYS_FSL_TBCLK_DIV 16
#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v3.0"
#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
#define CONFIG_SYS_FSL_ERRATUM_A007212
powerpc/mpc85xx: Add T2080/T2081 SoC support Add support for Freescale T2080/T2081 SoC. T2080 includes the following functions and features: - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz - 2MB L2 cache and 512KB CoreNet platform cache (CPC) - Hierarchical interconnect fabric - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving - Data Path Acceleration Architecture (DPAA) incorporating acceleration - 16 SerDes lanes up to 10.3125 GHz - 8 mEMACs for network interfaces (four 1Gbps MACs and four 10Gbps/1Gbps MACs) - High-speed peripheral interfaces - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV) - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz - Additional peripheral interfaces - Two serial ATA (SATA 2.0) controllers - Two high-speed USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Three eight-channel DMA engines - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 Differences between T2080 and T2081: Feature T2080 T2081 1G Ethernet numbers: 8 6 10G Ethernet numbers: 4 2 SerDes lanes: 16 8 Serial RapidIO,RMan: 2 no SATA Controller: 2 no Aurora: yes no SoC Package: 896-pins 780-pins Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-11-22 09:39:10 +00:00
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000
#define CONFIG_SYS_FSL_SFP_VER_3_0
#define CONFIG_SYS_FSL_ISBC_VER 2
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_SYS_FSL_ERRATUM_A006261
#define CONFIG_SYS_FSL_ERRATUM_A006593
#define CONFIG_SYS_FSL_ERRATUM_A007186
#define CONFIG_SYS_FSL_ERRATUM_A006379
#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE
#define CONFIG_SYS_FSL_SFP_VER_3_0
powerpc/mpc85xx: Add T2080/T2081 SoC support Add support for Freescale T2080/T2081 SoC. T2080 includes the following functions and features: - Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz - 2MB L2 cache and 512KB CoreNet platform cache (CPC) - Hierarchical interconnect fabric - One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving - Data Path Acceleration Architecture (DPAA) incorporating acceleration - 16 SerDes lanes up to 10.3125 GHz - 8 mEMACs for network interfaces (four 1Gbps MACs and four 10Gbps/1Gbps MACs) - High-speed peripheral interfaces - Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV) - Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz - Additional peripheral interfaces - Two serial ATA (SATA 2.0) controllers - Two high-speed USB 2.0 controllers with integrated PHY - Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC) - Enhanced serial peripheral interface (eSPI) - Four I2C controllers - Four 2-pin UARTs or two 4-pin UARTs - Integrated Flash Controller supporting NAND and NOR flash - Three eight-channel DMA engines - Support for hardware virtualization and partitioning enforcement - QorIQ Platform's Trust Architecture 2.0 Differences between T2080 and T2081: Feature T2080 T2081 1G Ethernet numbers: 8 6 10G Ethernet numbers: 4 2 SerDes lanes: 16 8 Serial RapidIO,RMan: 2 no SATA Controller: 2 no Aurora: yes no SoC Package: 896-pins 780-pins Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Acked-by: York Sun <yorksun@freescale.com>
2013-11-22 09:39:10 +00:00
#elif defined(CONFIG_PPC_C29X)
#define CONFIG_MAX_CPUS 1
#define CONFIG_FSL_SDHC_V2_3
#define CONFIG_SYS_FSL_NUM_LAWS 12
#define CONFIG_SYS_PPC_E500_DEBUG_TLB 3
#define CONFIG_TSECV2_1
#define CONFIG_SYS_FSL_SEC_COMPAT 6
#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
#define CONFIG_NUM_DDR_CONTROLLERS 1
#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_6
#define CONFIG_SYS_FSL_IFC_BANK_COUNT 8
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000
#define CONFIG_SYS_FSL_ERRATUM_A005125
#elif defined(CONFIG_QEMU_E500)
#define CONFIG_MAX_CPUS 1
#define CONFIG_SYS_CCSRBAR_DEFAULT 0xe0000000
#else
#error Processor type not defined for this platform
#endif
#ifndef CONFIG_SYS_CCSRBAR_DEFAULT
#error "CONFIG_SYS_CCSRBAR_DEFAULT is not defined for this platform."
#endif
#ifdef CONFIG_E6500
#define CONFIG_SYS_FSL_THREADS_PER_CORE 2
#else
#define CONFIG_SYS_FSL_THREADS_PER_CORE 1
#endif
#if !defined(CONFIG_SYS_FSL_DDRC_GEN1) && \
!defined(CONFIG_SYS_FSL_DDRC_GEN2) && \
!defined(CONFIG_SYS_FSL_DDRC_GEN3) && \
!defined(CONFIG_SYS_FSL_DDRC_GEN4)
#define CONFIG_SYS_FSL_DDRC_GEN3
#endif
#endif /* _ASM_MPC85xx_CONFIG_H_ */