u-boot/drivers/ddr/fsl/mpc85xx_ddr_gen3.c

574 lines
17 KiB
C
Raw Normal View History

/*
* Copyright 2008-2012 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* Version 2 as published by the Free Software Foundation.
*/
#include <common.h>
#include <asm/io.h>
#include <fsl_ddr_sdram.h>
#include <asm/processor.h>
#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
#endif
DECLARE_GLOBAL_DATA_PTR;
/*
* regs has the to-be-set values for DDR controller registers
* ctrl_num is the DDR controller number
* step: 0 goes through the initialization in one pass
* 1 sets registers and returns before enabling controller
* 2 resumes from step 1 and continues to initialize
* Dividing the initialization to two steps to deassert DDR reset signal
* to comply with JEDEC specs for RDIMMs.
*/
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
unsigned int ctrl_num, int step)
{
unsigned int i, bus_width;
struct ccsr_ddr __iomem *ddr;
u32 temp_sdram_cfg;
u32 total_gb_size_per_controller;
int timeout;
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
int timeout_save;
volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
int csn = -1;
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003
u32 save1, save2;
#endif
#ifdef CONFIG_DEEP_SLEEP
const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
bool sleep_flag = 0;
#endif
#ifdef CONFIG_DEEP_SLEEP
if (in_be32(&gur->scrtsr[0]) & (1 << 3))
sleep_flag = 1;
#endif
switch (ctrl_num) {
case 0:
ddr = (void *)CONFIG_SYS_FSL_DDR_ADDR;
break;
#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
case 1:
ddr = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
break;
#endif
#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
case 2:
ddr = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
break;
#endif
#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
case 3:
ddr = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
break;
#endif
default:
printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
return;
}
if (step == 2)
goto step2;
if (regs->ddr_eor)
out_be32(&ddr->eor, regs->ddr_eor);
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
debug("Workaround for ERRATUM_DDR111_DDR134\n");
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
cs_sa = (regs->cs[i].bnds >> 16) & 0xfff;
cs_ea = regs->cs[i].bnds & 0xfff;
if ((cs_sa <= 0xff) && (cs_ea >= 0xff)) {
csn = i;
csn_bnds_backup = regs->cs[i].bnds;
csn_bnds_t = (unsigned int *) &regs->cs[i].bnds;
if (cs_ea > 0xeff)
*csn_bnds_t = regs->cs[i].bnds + 0x01000000;
else
*csn_bnds_t = regs->cs[i].bnds + 0x01000100;
debug("Found cs%d_bns (0x%08x) covering 0xff000000, "
"change it to 0x%x\n",
csn, csn_bnds_backup, regs->cs[i].bnds);
break;
}
}
#endif
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
if (i == 0) {
out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
out_be32(&ddr->cs0_config, regs->cs[i].config);
out_be32(&ddr->cs0_config_2, regs->cs[i].config_2);
} else if (i == 1) {
out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
out_be32(&ddr->cs1_config, regs->cs[i].config);
out_be32(&ddr->cs1_config_2, regs->cs[i].config_2);
} else if (i == 2) {
out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
out_be32(&ddr->cs2_config, regs->cs[i].config);
out_be32(&ddr->cs2_config_2, regs->cs[i].config_2);
} else if (i == 3) {
out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
out_be32(&ddr->cs3_config, regs->cs[i].config);
out_be32(&ddr->cs3_config_2, regs->cs[i].config_2);
}
}
out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
#ifdef CONFIG_DEEP_SLEEP
if (sleep_flag)
out_be32(&ddr->sdram_cfg_2,
regs->ddr_sdram_cfg_2 & ~SDRAM_CFG2_D_INIT);
else
#endif
out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
out_be32(&ddr->sdram_mode_4, regs->ddr_sdram_mode_4);
out_be32(&ddr->sdram_mode_5, regs->ddr_sdram_mode_5);
out_be32(&ddr->sdram_mode_6, regs->ddr_sdram_mode_6);
out_be32(&ddr->sdram_mode_7, regs->ddr_sdram_mode_7);
out_be32(&ddr->sdram_mode_8, regs->ddr_sdram_mode_8);
out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
#ifdef CONFIG_DEEP_SLEEP
if (sleep_flag) {
out_be32(&ddr->init_addr, 0);
out_be32(&ddr->init_ext_addr, (1 << 31));
} else
#endif
{
out_be32(&ddr->init_addr, regs->ddr_init_addr);
out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
}
out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
#ifndef CONFIG_SYS_FSL_DDR_EMU
/*
* Skip these two registers if running on emulator
* because emulator doesn't have skew between bytes.
*/
if (regs->ddr_wrlvl_cntl_2)
out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
if (regs->ddr_wrlvl_cntl_3)
out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
#endif
out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
out_be32(&ddr->err_disable, regs->err_disable);
out_be32(&ddr->err_int_en, regs->err_int_en);
for (i = 0; i < 32; i++) {
if (regs->debug[i]) {
debug("Write to debug_%d as %08x\n", i+1, regs->debug[i]);
out_be32(&ddr->debug[i], regs->debug[i]);
}
}
#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
out_be32(&ddr->debug[28], 0x30003000);
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
out_be32(&ddr->debug[12], 0x00000015);
out_be32(&ddr->debug[21], 0x24000000);
#endif /* CONFIG_SYS_FSL_ERRATUM_DDR_A003474 */
/*
* For RDIMMs, JEDEC spec requires clocks to be stable before reset is
* deasserted. Clocks start when any chip select is enabled and clock
* control register is set. Because all DDR components are connected to
* one reset signal, this needs to be done in two steps. Step 1 is to
* get the clocks started. Step 2 resumes after reset signal is
* deasserted.
*/
if (step == 1) {
udelay(200);
return;
}
step2:
/* Set, but do not enable the memory */
temp_sdram_cfg = regs->ddr_sdram_cfg;
temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003
debug("Workaround for ERRATUM_DDR_A003\n");
if (regs->ddr_sdram_rcw_2 & 0x00f00000) {
out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2 & 0xf07fffff);
out_be32(&ddr->debug[2], 0x00000400);
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl & 0x7fffffff);
out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl & 0x7fffffff);
out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2 & 0xffffffeb);
out_be32(&ddr->mtcr, 0);
save1 = in_be32(&ddr->debug[12]);
save2 = in_be32(&ddr->debug[21]);
out_be32(&ddr->debug[12], 0x00000015);
out_be32(&ddr->debug[21], 0x24000000);
out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval & 0xffff);
out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_BI | SDRAM_CFG_MEM_EN);
asm volatile("sync;isync");
while (!(in_be32(&ddr->debug[1]) & 0x2))
;
switch (regs->ddr_sdram_rcw_2 & 0x00f00000) {
case 0x00000000:
out_be32(&ddr->sdram_md_cntl,
MD_CNTL_MD_EN |
MD_CNTL_CS_SEL_CS0_CS1 |
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x02));
#if (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
if (!(regs->cs[2].config & SDRAM_CS_CONFIG_EN))
break;
while (in_be32(&ddr->sdram_md_cntl) & MD_CNTL_MD_EN)
;
out_be32(&ddr->sdram_md_cntl,
MD_CNTL_MD_EN |
MD_CNTL_CS_SEL_CS2_CS3 |
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x02));
#endif
break;
case 0x00100000:
out_be32(&ddr->sdram_md_cntl,
MD_CNTL_MD_EN |
MD_CNTL_CS_SEL_CS0_CS1 |
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x0a));
#if (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
if (!(regs->cs[2].config & SDRAM_CS_CONFIG_EN))
break;
while (in_be32(&ddr->sdram_md_cntl) & MD_CNTL_MD_EN)
;
out_be32(&ddr->sdram_md_cntl,
MD_CNTL_MD_EN |
MD_CNTL_CS_SEL_CS2_CS3 |
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x0a));
#endif
break;
case 0x00200000:
out_be32(&ddr->sdram_md_cntl,
MD_CNTL_MD_EN |
MD_CNTL_CS_SEL_CS0_CS1 |
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x12));
#if (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
if (!(regs->cs[2].config & SDRAM_CS_CONFIG_EN))
break;
while (in_be32(&ddr->sdram_md_cntl) & MD_CNTL_MD_EN)
;
out_be32(&ddr->sdram_md_cntl,
MD_CNTL_MD_EN |
MD_CNTL_CS_SEL_CS2_CS3 |
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x12));
#endif
break;
case 0x00300000:
out_be32(&ddr->sdram_md_cntl,
MD_CNTL_MD_EN |
MD_CNTL_CS_SEL_CS0_CS1 |
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x1a));
#if (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
if (!(regs->cs[2].config & SDRAM_CS_CONFIG_EN))
break;
while (in_be32(&ddr->sdram_md_cntl) & MD_CNTL_MD_EN)
;
out_be32(&ddr->sdram_md_cntl,
MD_CNTL_MD_EN |
MD_CNTL_CS_SEL_CS2_CS3 |
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x1a));
#endif
break;
default:
out_be32(&ddr->sdram_md_cntl,
MD_CNTL_MD_EN |
MD_CNTL_CS_SEL_CS0_CS1 |
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x02));
#if (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
if (!(regs->cs[2].config & SDRAM_CS_CONFIG_EN))
break;
while (in_be32(&ddr->sdram_md_cntl) & MD_CNTL_MD_EN)
;
out_be32(&ddr->sdram_md_cntl,
MD_CNTL_MD_EN |
MD_CNTL_CS_SEL_CS2_CS3 |
0x04000000 |
MD_CNTL_WRCW |
MD_CNTL_MD_VALUE(0x02));
#endif
printf("Unsupported RC10\n");
break;
}
while (in_be32(&ddr->sdram_md_cntl) & 0x80000000)
;
udelay(6);
out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
out_be32(&ddr->debug[2], 0x0);
out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
out_be32(&ddr->debug[12], save1);
out_be32(&ddr->debug[21], save2);
out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
}
#endif
/*
* For 8572 DDR1 erratum - DDR controller may enter illegal state
* when operatiing in 32-bit bus mode with 4-beat bursts,
* This erratum does not affect DDR3 mode, only for DDR2 mode.
*/
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_115
debug("Workaround for ERRATUM_DDR_115\n");
if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2)
&& in_be32(&ddr->sdram_cfg) & 0x80000) {
/* set DEBUG_1[31] */
setbits_be32(&ddr->debug[0], 1);
}
#endif
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
debug("Workaround for ERRATUM_DDR111_DDR134\n");
/*
* This is the combined workaround for DDR111 and DDR134
* following the published errata for MPC8572
*/
/* 1. Set EEBACR[3] */
setbits_be32(&ecm->eebacr, 0x10000000);
debug("Setting EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
/* 2. Set DINIT in SDRAM_CFG_2*/
setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_D_INIT);
debug("Setting sdram_cfg_2[D_INIT] to 0x%08x\n",
in_be32(&ddr->sdram_cfg_2));
/* 3. Set DEBUG_3[21] */
setbits_be32(&ddr->debug[2], 0x400);
debug("Setting DEBUG_3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
#endif /* part 1 of the workaound */
/*
* 500 painful micro-seconds must elapse between
* the DDR clock setup and the DDR config enable.
* DDR2 need 200 us, and DDR3 need 500 us from spec,
* we choose the max, that is 500 us for all of case.
*/
udelay(500);
asm volatile("sync;isync");
#ifdef CONFIG_DEEP_SLEEP
if (sleep_flag) {
/* enter self-refresh */
setbits_be32(&ddr->sdram_cfg_2, (1 << 31));
/* do board specific memory setup */
board_mem_sleep_setup();
}
#endif
/* Let the controller go */
#ifdef CONFIG_DEEP_SLEEP
if (sleep_flag)
temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) | SDRAM_CFG_BI);
else
#endif
temp_sdram_cfg = (in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI);
out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
asm volatile("sync;isync");
total_gb_size_per_controller = 0;
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
if (!(regs->cs[i].config & 0x80000000))
continue;
total_gb_size_per_controller += 1 << (
((regs->cs[i].config >> 14) & 0x3) + 2 +
((regs->cs[i].config >> 8) & 0x7) + 12 +
((regs->cs[i].config >> 0) & 0x7) + 8 +
3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) -
26); /* minus 26 (count of 64M) */
}
if (fsl_ddr_get_intl3r() & 0x80000000) /* 3-way interleaving */
total_gb_size_per_controller *= 3;
else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */
total_gb_size_per_controller <<= 1;
/*
* total memory / bus width = transactions needed
* transactions needed / data rate = seconds
* to add plenty of buffer, double the time
* For example, 2GB on 666MT/s 64-bit bus takes about 402ms
* Let's wait for 800ms
*/
bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
>> SDRAM_CFG_DBW_SHIFT);
timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
(get_ddr_freq(0) >> 20)) << 1;
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
timeout_save = timeout;
#endif
total_gb_size_per_controller >>= 4; /* shift down to gb size */
debug("total %d GB\n", total_gb_size_per_controller);
debug("Need to wait up to %d * 10ms\n", timeout);
/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
(timeout >= 0)) {
udelay(10000); /* throttle polling rate */
timeout--;
}
if (timeout <= 0)
printf("Waiting for D_INIT timeout. Memory may not work.\n");
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
/* continue this workaround */
/* 4. Clear DEBUG3[21] */
clrbits_be32(&ddr->debug[2], 0x400);
debug("Clearing D3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
/* DDR134 workaround starts */
/* A: Clear sdram_cfg_2[odt_cfg] */
clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_ODT_CFG_MASK);
debug("Clearing SDRAM_CFG2[ODT_CFG] to 0x%08x\n",
in_be32(&ddr->sdram_cfg_2));
/* B: Set DEBUG1[15] */
setbits_be32(&ddr->debug[0], 0x10000);
debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
/* C: Set timing_cfg_2[cpo] to 0b11111 */
setbits_be32(&ddr->timing_cfg_2, TIMING_CFG_2_CPO_MASK);
debug("Setting TMING_CFG_2[CPO] to 0x%08x\n",
in_be32(&ddr->timing_cfg_2));
/* D: Set D6 to 0x9f9f9f9f */
out_be32(&ddr->debug[5], 0x9f9f9f9f);
debug("Setting D6 to 0x%08x\n", in_be32(&ddr->debug[5]));
/* E: Set D7 to 0x9f9f9f9f */
out_be32(&ddr->debug[6], 0x9f9f9f9f);
debug("Setting D7 to 0x%08x\n", in_be32(&ddr->debug[6]));
/* F: Set D2[20] */
setbits_be32(&ddr->debug[1], 0x800);
debug("Setting D2[20] to 0x%08x\n", in_be32(&ddr->debug[1]));
/* G: Poll on D2[20] until cleared */
while (in_be32(&ddr->debug[1]) & 0x800)
udelay(10000); /* throttle polling rate */
/* H: Clear D1[15] */
clrbits_be32(&ddr->debug[0], 0x10000);
debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
/* I: Set sdram_cfg_2[odt_cfg] */
setbits_be32(&ddr->sdram_cfg_2,
regs->ddr_sdram_cfg_2 & SDRAM_CFG2_ODT_CFG_MASK);
debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
/* Continuing with the DDR111 workaround */
/* 5. Set D2[21] */
setbits_be32(&ddr->debug[1], 0x400);
debug("Setting D2[21] to 0x%08x\n", in_be32(&ddr->debug[1]));
/* 6. Poll D2[21] until its cleared */
while (in_be32(&ddr->debug[1]) & 0x400)
udelay(10000); /* throttle polling rate */
/* 7. Wait for state machine 2nd run, roughly 400ms/GB */
debug("Wait for %d * 10ms\n", timeout_save);
udelay(timeout_save * 10000);
/* 8. Set sdram_cfg_2[dinit] if options requires */
setbits_be32(&ddr->sdram_cfg_2,
regs->ddr_sdram_cfg_2 & SDRAM_CFG2_D_INIT);
debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
/* 9. Poll until dinit is cleared */
timeout = timeout_save;
debug("Need to wait up to %d * 10ms\n", timeout);
while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
(timeout >= 0)) {
udelay(10000); /* throttle polling rate */
timeout--;
}
if (timeout <= 0)
printf("Waiting for D_INIT timeout. Memory may not work.\n");
/* 10. Clear EEBACR[3] */
clrbits_be32(&ecm->eebacr, 10000000);
debug("Clearing EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
if (csn != -1) {
csn_bnds_t = (unsigned int *) &regs->cs[csn].bnds;
*csn_bnds_t = csn_bnds_backup;
debug("Change cs%d_bnds back to 0x%08x\n",
csn, regs->cs[csn].bnds);
setbits_be32(&ddr->sdram_cfg, 0x2); /* MEM_HALT */
switch (csn) {
case 0:
out_be32(&ddr->cs0_bnds, regs->cs[csn].bnds);
break;
case 1:
out_be32(&ddr->cs1_bnds, regs->cs[csn].bnds);
break;
case 2:
out_be32(&ddr->cs2_bnds, regs->cs[csn].bnds);
break;
case 3:
out_be32(&ddr->cs3_bnds, regs->cs[csn].bnds);
break;
}
clrbits_be32(&ddr->sdram_cfg, 0x2);
}
#endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
#ifdef CONFIG_DEEP_SLEEP
if (sleep_flag)
/* exit self-refresh */
clrbits_be32(&ddr->sdram_cfg_2, (1 << 31));
#endif
}