sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity

mxc nand: Homogenize IP revisions with Linux 

Use the same IP revisions as in Linux in order to make the comparison more
clear.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
This commit is contained in:
Benoît Thébaudeau 2012-08-13 22:50:53 +02:00 committed by Scott Wood
parent 1884d6577e
commit 9c60e75e05
3 changed files with 19 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
drivers/mtd/nand/mxc_nand.c
View File

@ -77,7 +77,7 @@ static struct nand_ecclayout nand_hw_eccoob2k = {
.oobfree = { {2, 4}, {11, 11}, {27, 11}, {43, 11}, {59, 5} },
};
#endif
#elif defined(MXC_NFC_V1_1)
#elif defined(MXC_NFC_V2_1)
#ifndef CONFIG_SYS_NAND_LARGEPAGE
static struct nand_ecclayout nand_hw_eccoob = {
.eccbytes = 9,
@ -213,7 +213,7 @@ static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
if (spare_only)
MTDDEBUG(MTD_DEBUG_LEVEL1, "send_prog_page (%d)\n", spare_only);
if (is_mxc_nfc_11()) {
if (is_mxc_nfc_21()) {
int i;
/*
* The controller copies the 64 bytes of spare data from
@ -273,7 +273,7 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
/* Wait for operation to complete */
wait_op_done(host, TROP_US_DELAY, spare_only);
if (is_mxc_nfc_11()) {
if (is_mxc_nfc_21()) {
int i;
/*
@ -377,7 +377,7 @@ static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
*/
}
#ifdef MXC_NFC_V1_1
#ifdef MXC_NFC_V2_1
static int mxc_nand_read_oob_syndrome(struct mtd_info *mtd,
struct nand_chip *chip,
int page, int sndcmd)
@ -1061,7 +1061,7 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command,
case NAND_CMD_PAGEPROG:
send_prog_page(host, 0, host->spare_only);
if (host->pagesize_2k && !is_mxc_nfc_11()) {
if (host->pagesize_2k && is_mxc_nfc_1()) {
/* data in 4 areas */
send_prog_page(host, 1, host->spare_only);
send_prog_page(host, 2, host->spare_only);
@ -1111,7 +1111,7 @@ void mxc_nand_command(struct mtd_info *mtd, unsigned command,
send_cmd(host, NAND_CMD_READSTART);
/* read for each AREA */
send_read_page(host, 0, host->spare_only);
if (!is_mxc_nfc_11()) {
if (is_mxc_nfc_1()) {
send_read_page(host, 1, host->spare_only);
send_read_page(host, 2, host->spare_only);
send_read_page(host, 3, host->spare_only);
@ -1200,7 +1200,7 @@ int board_nand_init(struct nand_chip *this)
this->ecc.calculate = mxc_nand_calculate_ecc;
this->ecc.hwctl = mxc_nand_enable_hwecc;
this->ecc.correct = mxc_nand_correct_data;
if (is_mxc_nfc_11()) {
if (is_mxc_nfc_21()) {
this->ecc.mode = NAND_ECC_HW_SYNDROME;
this->ecc.read_page = mxc_nand_read_page_syndrome;
this->ecc.read_page_raw = mxc_nand_read_page_raw_syndrome;
@ -1238,7 +1238,7 @@ int board_nand_init(struct nand_chip *this)
this->ecc.layout = &nand_hw_eccoob;
#endif
#ifdef MXC_NFC_V1_1
#ifdef MXC_NFC_V2_1
tmp = readw(&host->regs->config1);
tmp |= NFC_ONE_CYCLE;
tmp |= NFC_4_8N_ECC;

16
include/fsl_nfc.h
View File

@ -33,7 +33,7 @@
* to support up to 2K byte pagesize nand.
* Reading or writing a 2K page requires 4 FDI/FDO cycles.
*
* MX25 and MX35 have version 1.1, which has:
* MX25 and MX35 have version 2.1, which has:
* 8 512-byte main buffers and
* 8 64-byte spare buffers
* to support up to 4K byte pagesize nand.
@ -42,10 +42,12 @@
*/
#if defined(CONFIG_MX27) || defined(CONFIG_MX31)
#define MXC_NFC_V1
#define is_mxc_nfc_11() 0
#define is_mxc_nfc_1() 1
#define is_mxc_nfc_21() 0
#elif defined(CONFIG_MX25) || defined(CONFIG_MX35)
#define MXC_NFC_V1_1
#define is_mxc_nfc_11() 1
#define MXC_NFC_V2_1
#define is_mxc_nfc_1() 0
#define is_mxc_nfc_21() 1
#else
#error "MXC NFC implementation not supported"
#endif
@ -55,7 +57,7 @@
#define NAND_MXC_SPARE_BUF_SIZE 16
#define NAND_MXC_REG_OFFSET 0xe00
#define NAND_MXC_2K_MULTI_CYCLE
#elif defined(MXC_NFC_V1_1)
#elif defined(MXC_NFC_V2_1)
#define NAND_MXC_NR_BUFS 8
#define NAND_MXC_SPARE_BUF_SIZE 64
#define NAND_MXC_REG_OFFSET 0x1e00
@ -86,7 +88,7 @@ struct fsl_nfc_regs {
u16 nf_wrprst;
u16 config1;
u16 config2;
#elif defined(MXC_NFC_V1_1)
#elif defined(MXC_NFC_V2_1)
u16 reserved2[2];
u16 buf_addr;
u16 flash_addr;
@ -153,7 +155,7 @@ struct fsl_nfc_regs {
*/
#define NFC_INT 0x8000
#ifdef MXC_NFC_V1_1
#ifdef MXC_NFC_V2_1
#define NFC_4_8N_ECC (1 << 0)
#endif
#define NFC_SP_EN (1 << 2)

4
nand_spl/nand_boot_fsl_nfc.c
View File

@ -47,7 +47,7 @@ static void nfc_wait_ready(void)
static void nfc_nand_init(void)
{
#if defined(MXC_NFC_V1_1)
#if defined(MXC_NFC_V2_1)
int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
int config1;
@ -142,7 +142,7 @@ static int nfc_nand_check_ecc(void)
#if defined(MXC_NFC_V1)
u16 ecc_status = readw(&nfc->ecc_status_result);
return (ecc_status & 0x3) == 2 || (ecc_status >> 2) == 2;
#elif defined(MXC_NFC_V1_1)
#elif defined(MXC_NFC_V2_1)
u32 ecc_status = readl(&nfc->ecc_status_result);
int ecc_per_page = CONFIG_SYS_NAND_PAGE_SIZE / 512;
int err_limit = CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page > 16 ? 8 : 4;