sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity
2,132 Commits 9 Branches 8 Tags 113 MiB
Commit Graph

168 Commits

Author SHA1 Message Date
Stefan Roese 2902fadade [PATCH] Update 440EPx/440GRx cpu detection 
Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-31 16:56:10 +01:00
Wolfgang Denk 15e5025a73 Merge with /home/hs/SC3/u-boot-dev 2007-01-19 12:06:32 +01:00
Heiko Schocher cb4820725e [PATCH] Fix: Compilerwarnings for SC3 board. 
The EBC Configuration Register is now by CFG_EBC_CFG definable
             Added JFFS2 support for the SC3 board.

Signed-off-by: Heiko Schocher <hs@denx.de>
 2007-01-18 11:28:51 +01:00
Stefan Roese 5fb692cae5 [PATCH] Add support for AMCC Taishan PPC440GX eval board 
Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-18 10:25:34 +01:00
Wolfgang Denk f11033e739 Merge with /home/hs/SC3/u-boot 
Some code cleanup.
 2007-01-15 13:41:04 +01:00
Stefan Roese 5a5c56986a [PATCH] Fix 440SPe rev B detection from previous patch 
Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-15 09:46:29 +01:00
Stefan Roese 95981778cf [PATCH] Update 440SP(e) cpu revisions 
Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.

Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-13 08:01:03 +01:00
Heiko Schocher ca43ba18e9 Added support for the SOLIDCARD III board from Eurodesign 
Signed-off-by: Heiko Schocher <hs@denx.de>
 2007-01-11 15:44:44 +01:00
Stefan Roese f07ae7a9da [PATCH] 44x: Fix problem with DDR controller setup (refresh rate) 
This patch fixes a problem with an incorrect setup for the refresh
timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c

Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-06 15:58:09 +01:00
Stefan Roese 0238898382 [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board 
This code will optimize the DDR2 controller setup on a board specific
basis.

Note: This code doesn't work right now on the NAND booting image for the
Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.

Signed-off-by: Stefan Roese <sr@denx.de>
 2007-01-05 10:38:05 +01:00
Wolfgang Denk bc5556d62b Merge with /home/hs/TQ/u-boot-dev 2006-12-24 01:30:04 +01:00
Heiko Schocher fa23044564 Added support for the TQM8272 board from TQ 
Signed-off-by: Heiko Schocher <hs@denx.de>
 2006-12-21 17:17:02 +01:00
Stefan Roese e732faec95 [PATCH] PPC4xx: 440SP Rev. C detection added 
Signed-off-by: Stefan Roese <sr@denx.de>
 2006-11-28 16:09:24 +01:00
Wolfgang Denk d2c83f5493 Merge with /home/sr/git/u-boot/denx-alpr-merge-test 2006-11-27 23:11:18 +01:00
Stefan Roese f6e495f54c [PATCH] 4xx_enet.c: Correct the setting of zmiifer register 
Patch below corrects the setting of the zmiifer register, it was
overwritting the register rather than ORing the settings.

Signed-off-by: Neil Wilson <NWilson@airspan.com>
Signed-off-by: Stefan Roese <sr@denx.de>
 2006-11-27 17:43:25 +01:00
Stefan Roese 1729b92cde [PATCH] 4xx: Fix problem with board specific reset code (now for real) 
Signed-off-by: Stefan Roese <sr@denx.de>
 2006-11-27 14:52:04 +01:00
Stefan Roese 1f94d162e2 [PATCH] 4xx: Fix problem with board specific reset code 
Signed-off-by: Stefan Roese <sr@denx.de>
 2006-11-27 14:48:41 +01:00
Stefan Roese ec0c2ec725 [PATCH] Remove testing 4xx enet PHY setup 
Signed-off-by: Stefan Roese <sr@denx.de>
 2006-11-27 14:46:06 +01:00
Stefan Roese 1c2ce22620 [PATCH] Update Prodrive ALPR board support (440GX) 
Signed-off-by: Stefan Roese <sr@denx.de>
 2006-11-27 14:12:17 +01:00
Stefan Roese 48c7d6dba9 Merge with /home/stefan/git/u-boot/denx 2006-11-27 14:11:22 +01:00
Stefan Roese 2053283304 [PATCH] PPC4xx start.S: Fix for processor errata 
Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
errata 1.12: 440_33 by moving patch up in code.

Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
Signed-off-by: Stefan Roese <sr@denx.de>
 2006-11-22 13:20:50 +01:00
Stefan Roese dfc8a9ee00 Merge with /home/stefan/git/u-boot/denx 2006-11-10 07:48:47 +01:00
Stefan Roese 7ade0c634a Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c 
Patch by Stefan Roese, 24 Oct 2006
 2006-10-24 18:13:43 +02:00
Wolfgang Denk ba999c531e Cleanup compile warnings. Prepare for release 1.1.5 2006-10-20 17:54:33 +02:00
Stefan Roese 43a2b0e76a Add board/cpu specific NAND chip select function to 440 NDFC 
Based on idea and implementation from Jeff Mann
Patch by Stefan Roese, 20 Oct 2006
 2006-10-20 15:17:55 +02:00
Stefan Roese edf0b54338 Make 4xx bootup message shorter on 440EPx/GRx platforms 
Patch by Stefan Roese, 18 Oct 2006
 2006-10-18 16:00:43 +02:00
Stefan Roese d7762337cb * PPC405EP: Add support for board configuration of CPC0_PCI register 
This is needed to be able to configure PerWE*/PCI_INT* pin as PerWE*
Patch by Tolunay Orkun, 07 Apr 2006
 2006-10-12 20:09:31 +02:00
Stefan Roese e0a46554c3 * PPC405EP: Add CFG_GPIO0_OR, CFG_GPIO0_ODR to setup GPIO completely. 
- Add configuration of Open Drain GPIO Output selection
  - Add configuration of initial value of GPIO output pins
Patch by Tolunay Orkun, 07 Apr 2006
 2006-10-12 20:09:27 +02:00
Wolfgang Denk 2b208f5308 Move "ar" flags to config.mk to allow for silent "make -s" 
Based on patch by Mike Frysinger, 20 Jun 2006
 2006-10-09 01:02:05 +02:00
Wolfgang Denk 511d0c72b8 Coding style cleanup 2006-10-09 00:42:01 +02:00
Stefan Roese f3443867e9 Add CONFIG_BOARD_RESET to configure board specific reset function 
Patch by Stefan Roese, 07 Oct 2006
 2006-10-07 11:30:52 +02:00
Stefan Roese 64cd52efd1 Merge with /home/stefan/git/u-boot/denx 2006-09-18 10:48:03 +02:00
Stefan Roese 854bc8da75 Add support for AMCC Rainier PPX440GRx eval board 
Patch by Stefan Roese, 13 Sep 2006
 2006-09-13 13:56:49 +02:00
Stefan Roese 2d658967e1 Fix build problem cpu/ppc4xx/ndfc.c 
Patch by Stefan Roese, 07 Sep 2006
 2006-09-07 13:09:53 +02:00
Stefan Roese 887e2ec9ec Add support for AMCC Sequoia PPC440EPx eval board 
- Add support for PPC440EPx & PPC440GRx
- Add support for PPC440EP(x)/GR(x) NAND controller
  in cpu/ppc4xx directory
- Add NAND boot functionality for Sequoia board,
  please see doc/README.nand-boot-ppc440 for details
- This Sequoia NAND image doesn't support environment
  in NAND for now. This will be added in a short while.
Patch by Stefan Roese, 07 Sep 2006
 2006-09-07 11:51:23 +02:00
Wolfgang Denk 6741ae92f3 Merge with /home/m8/git/u-boot 2006-09-04 01:03:57 +02:00
Marian Balakowicz f93286397e Add support for a saving build objects in a separate directory. 
Modifications are based on the linux kernel approach and
support two use cases:

  1) Add O= to the make command line
  'make O=/tmp/build all'

  2) Set environement variable BUILD_DIR to point to the desired location
  'export BUILD_DIR=/tmp/build'
  'make'

The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'

Command line 'O=' setting overrides BUILD_DIR environent variable.

When none of the above methods is used the local build is performed and
the object files are placed in the source directory.
 2006-09-01 19:49:50 +02:00
Stefan Roese 2b393b0f0a PCIe endpoint support for AMCC Yucca 440SPe board 
Patch by Tirumala R Marri, 26 Aug 2006
 2006-08-29 08:05:15 +02:00
Wolfgang Denk 16850919ff Code cleanup 2006-08-27 18:10:01 +02:00
Stefan Roese 899620c2d6 Add initial support for the ALPR board from Prodrive 
NAND needs some additional testing
Patch by Heiko Schocher, 15 Aug 2006
 2006-08-15 14:22:35 +02:00
Wolfgang Denk 7213859d11 Merge with /home/raj/git/u-boot 2006-08-11 18:19:53 +02:00
Rafal Jaworowski 36b904a7fd Fix PCI-Express on PPC440SPe rev. A. 2006-08-11 12:35:52 +02:00
Wolfgang Denk d10afb3916 Merge with /home/raj/git/u-boot 2006-08-10 15:40:49 +02:00
Rafal Jaworowski 692519b1ed Add support for PCI-Express on PPC440SPe (Yucca board). 2006-08-10 12:43:17 +02:00
Stefan Roese a2c95a7224 PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performance 
AMCC suggested to set the PMU bit to 0 for best performace on
the PPC440 DDR controller.
Please see doc/README.440-DDR-performance for details.
Patch by Stefan Roese, 28 Jul 2006
 2006-07-28 18:34:58 +02:00
Wolfgang Denk b9365a26a1 Code cleanup 2006-07-21 11:56:05 +02:00
Wolfgang Denk b87dfd2854 Add support for TB5200 board 
The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
integrated in a little aluminium case.
Patch by Martin Krause, 8 Jun 2006

Some code cleanup
 2006-07-19 13:50:38 +02:00
Marian Balakowicz edd6cf20e1 Fix timer problems on AMCC yucca board. 
Set Timer Clock Select to use CPU clock as a timer input source.
 2006-07-06 21:17:24 +02:00
Marian Balakowicz fbb0b559ae Add system memory to the PCI region list for AMCC PPC44x CPUs. 
Enabled it for Yucca board.
 2006-07-04 00:55:47 +02:00
Marian Balakowicz fe84b48a94 Cleanup config file and bootup output for Yucca board. 2006-07-03 23:42:36 +02:00