Alexander Couzens
451635eda3
configs/jb02v2: remove 'v2' from initramfs file
...
the jb02v2 must match the openwrt board name which doesn't contain a v2 and isn't
easy changable
2015-07-19 21:01:53 +02:00
Alexander Couzens
d97d1ee1f2
correct recovery filenames to be in sync with openwrt builds
...
removed prefix -skw and -cb2 from jb names
2015-07-19 19:02:34 +02:00
Alexander Couzens
aa579e90e9
configs: rename recovery image filename to be consistant
...
sed -i 's/-sysmo-/-sysmocom-/g'
2015-06-30 19:17:30 +02:00
Alexander Couzens
7923dcb950
correct recovery file names to match openwrt initramfs names
2015-06-03 21:57:16 +02:00
Alexander Couzens
07469c59e3
detect flash chips by jedec ids instead of using hardcoded values
2015-06-02 11:38:54 +02:00
Alexander Couzens
e962169649
cmd_recovery: replace flashing with booting an initramfs image
2015-05-19 10:59:29 +02:00
Alexander Couzens
211d005623
jb02v3-skw: increase flash size to 16mb
2015-05-12 17:15:46 +02:00
Alexander Couzens
35dabe9f00
add missing configuration file for jb02v3-skw based on ap2
2015-05-12 16:11:51 +02:00
Alexander Couzens
92b0391332
rename jb02 into jb02v2-cb2
2015-05-12 16:09:47 +02:00
Alexander Couzens
8a9d269a8e
configs: remove duplicate define BOOTDELAY from ar7240.h
...
It's not ar7240 specific and creates warning, because it's already defined in common.h.
2015-03-16 16:31:42 +01:00
Alexander Couzens
521b18c48a
configs: enable command saves - send a region over srecord
2015-03-16 16:16:11 +01:00
Alexander Couzens
4acb292f4e
configs: run recovery when bootm fails
2015-03-16 16:05:47 +01:00
Alexander Couzens
72e548d4c5
add setmac/showmac commands to setmac or showmac
...
setmac <eth0> <eth1> <wlan0> [nobackup]
setmac first do a backup of the calibration sector. It copys the
sector to the sector before itself. This behavious can be overwritten by
adding `nobackup`.
showmac - show mac addreses.
2015-03-12 01:42:22 +01:00
Alexander Couzens
3d9467d828
configs: add configuration for ap1 and jb02
2015-03-11 17:58:41 +01:00
Alexander Couzens
4378289084
configs: carambola2 use carambola2 recovery image
2015-03-11 17:58:41 +01:00
Alexander Couzens
01a658ce51
configs: rename skylab -> ap2
2015-03-11 17:40:17 +01:00
Alexander Couzens
96158b1b2e
configs: move CFG_BOOTM_LEN into common.h
2015-03-11 17:38:37 +01:00
Alexander Couzens
fd424cf047
configs: move CFG_BOOTM_LEN up to flash configuration
2015-03-11 17:37:45 +01:00
Alexander Couzens
9735e7c4b9
configs: move ETHADDR into common.h
2015-03-11 17:36:26 +01:00
Alexander Couzens
b59bb608cd
configs/skylab: fix BOARDCAL location
...
BOARDCAL is used by progmac and ethernet code to load the mac address
from flash.
2015-03-10 14:54:12 +01:00
Alexander Couzens
aaa2d179da
configs: remove unused define WLANCAL
2015-03-10 14:52:56 +01:00
Alexander Couzens
292f453210
congfigs/bootcmd: run recovery if bootm fails
2015-03-10 11:48:16 +01:00
Alexander Couzens
847feac483
recovery: introduce new define RECOVERY_FILENAME_STRING for tftp in cmd_recovery
...
It's used to define a different recovery image for ap1 and ap2
2015-03-09 19:33:35 +01:00
Alexander Couzens
7966dca8a2
config/common: set bootdelay to 3 seconds
...
Fixes #1075
2015-03-09 15:21:29 +01:00
Alexander Couzens
96e8e39feb
configs: use bootcycle to detect a recovery case and run_recovery if needed
2015-03-04 21:12:51 +01:00
Alexander Couzens
935d074b4e
configs: set STOP str to ap-stop and increase bootdelay to 8 secs
2015-03-04 20:58:02 +01:00
Alexander Couzens
bcb1638b70
remove carambola_factory
...
we have our own recovery mechanism
2015-03-04 20:03:51 +01:00
Alexander Couzens
a1c127f9a1
micro: move more config stuff into common.h
2015-03-04 20:00:39 +01:00
Alexander Couzens
ed5b09c07a
micro: move more config stuff into common.h
2015-03-04 19:59:01 +01:00
Alexander Couzens
2f28c555cf
micro: move more config stuff into common.h
2015-03-04 19:55:51 +01:00
Alexander Couzens
b8232ca19c
micro: move more config stuff into common.h
2015-03-04 19:53:55 +01:00
Alexander Couzens
b1860e6426
micro: move more config stuff into common.h
2015-03-04 19:53:19 +01:00
Alexander Couzens
9ab171012d
FIXUP: remove EHCI stuff
2015-03-04 19:45:39 +01:00
Alexander Couzens
894d58c911
configs: remove unused define FLASH_SIZE
2015-03-04 19:32:48 +01:00
Alexander Couzens
d169957dff
configs: move generic ar7240 ddr + pll configuration into ar7240_freq.h
2015-03-04 19:23:44 +01:00
Alexander Couzens
cb87eab8a2
configs: move board specific config vars from Makefile to configs/<board>.h
2015-03-04 18:55:02 +01:00
Alexander Couzens
19e56e0de4
remove USB support for skylab/carambola
2015-03-04 18:28:30 +01:00
Alexander Couzens
781503ce81
add bootcycle counter
...
Introduce 2 new commands.
`inccycle` to increase the bootcycle by one
`checkcycle` to check if bootcycle is reached. Returncode must be evaluated.
2015-03-03 14:38:18 +01:00
Alexander Couzens
21a475020e
carambola/skylab: use hw watchdog
2015-03-03 01:41:27 +01:00
Alexander Couzens
8fda131810
add support for skylab
2015-03-03 01:40:56 +01:00
Mantas Pucka
49247b6229
Update baudrate table
...
FTDI does not support anything >3Mbaud
2014-10-28 10:59:19 +02:00
Mantas Pucka
8754f50b55
Add new UART driver, support for configurable baudrates
2014-10-24 13:47:59 +03:00
Mantas Pucka
2d5f7782ce
Add option to configure char sequence for stopping boot process
...
Sequence is stored in 'bootstopkey' environment variable, default
sequence is <ESC> key (\x1B).
Non-printable chars in env variable should be escaped
using (\x1F) notation. Max len of sequence 40 chars for env
variable, 20 chars for raw (unescaped) string.
2014-10-23 09:38:12 +03:00
Mantas Pucka
2875718480
Initial code import
2014-10-21 15:40:42 +03:00