Commit Graph

13 Commits

Author SHA1 Message Date
Bin Meng 002610f620 x86: fsp: Load GDT before calling FspInitEntry
Currently the FSP execution environment GDT is setup by U-Boot in
arch/x86/cpu/start16.S, which works pretty well. But if we try to
move the FspInitEntry call a little bit later to better fit into
U-Boot's initialization sequence, FSP will fail to bring up the AP
due to #GP fault as AP's GDT is duplicated from BSP whose GDT is
now moved into CAR, and unfortunately FSP calls AP initialization
after it disables the CAR. So basically the BSP's GDT still refers
to the one in the CAR, whose content is no longer available, so
when AP starts up and loads its segment register, it blows up.

To resolve this, we load GDT before calling into FspInitEntry.
The GDT is the same one used in arch/x86/cpu/start16.S, which is
in the ROM and exists forever.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Tested-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:15 -06:00
Bin Meng fea1c47f54 x86: Fix various code format issues in start16.S
Various minor code format issues are fixed in start16.S:
- U-boot -> U-Boot
- 32bit -> 32-bit
- Use TAB instead of SPACE to indent
- Move the indention location of the GDT comment block

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-01-23 17:24:55 -07:00
Simon Glass f67cd51e65 x86: Save the BIST value on reset
The built in self test value is available in register eax on start-up. Save
it so that it can be accessed later. Unfortunately we must wait until the
global_data is available before we can do this, so there is a little bit of
shuffling to keep it around.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:10 +01:00
Simon Glass 3c00695ee1 x86: Invalidate TLB as early as possible
We should invalidate the TLB right at the start to ensure that we don't get
false address translations even though paging is disabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:09 +01:00
Simon Glass 85d87328ea x86: Remove board_init16() call which is not used
This allows a board to do very early init, but no boards need to do this.
We may as well drop this feature.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2014-11-21 07:24:08 +01:00
Bin Meng 35d4fed320 x86: Fix GDT limit in start16.S
GDT limit should be one less than an integral multiple of eight.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2014-10-22 09:03:07 -06:00
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00
Gabe Black 91d82a29e7 x86: Add back cold- and warm-boot flags
These were removed, but actually are useful.

Cold means that we started from a reset/power on.
Warm means that we started from another U-Boot.

We determine whether u-boot on x86 was warm or cold booted (really if
it started at the beginning of the text segment or at the ELF entry point).
We plumb the result through to the global data structure.

Signed-off-by: Simon Glass <sjg@chromium.org>
2012-12-06 14:30:42 -08:00
Graeme Russ 58c7a6751d x86: Tweak IDT and GDT for alignment and readability
--
Changes for v2:
 - Renamed to better reflect nature of changes
2012-01-04 22:29:40 +11:00
Graeme Russ facc9e7bf4 x86: Punt cold- and warm-boot flags
Nobody uses them anyway

Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
2011-11-29 21:04:06 +11:00
Ondrej Kupka 7b3d5380ee x86: turn off cache: set control register properly
Bits should be ORed when they are supposed to be added together

Signed-off-by: Ondrej Kupka <ondra.cap@gmail.com>
2011-11-02 20:48:30 +11:00
Albert ARIBAUD fa82f871c8 Convert ISO-8859 files to UTF-8
There was a mix of UTF-8 and ISO-8859 files in the U-Boot source
tree, which could cause issues with the patchwork review system.
This commit converts all ISO-8859 files to UTF-8.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
2011-08-04 23:34:02 +02:00
Graeme Russ fea2572001 x86: Rename i386 to x86
Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
2011-04-13 19:43:28 +10:00