Commit graph

8414 commits

Author SHA1 Message Date
Alison Wang
8f0c7cbb0d armv7/ls1021a: allow OCRAM access permission as R/W in SPL
On LS1021A Rev2.0, OCRAM's security level needs to be changed to
non-secure access for SD boot. This patch will allow OCRAM
access permission as R/W in SPL.

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-08-03 12:06:37 -07:00
chenhui zhao
933db81c04 armv7/ls1021atwr: program the regulator for deep sleep
Program the external regulator to switch off voltage in deep sleep.

Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com>
Acked-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-08-03 12:06:36 -07:00
Tang Yuantian
99e1bd4241 armv7/ls1021atwr: added deep sleep support in uboot
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Acked-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-08-03 12:06:36 -07:00
Tom Rini
7a1af7a79b Merge branch 'master' of git://www.denx.de/git/u-boot-imx 2015-08-02 07:40:37 -04:00
Peng Fan
f0ff57b0b2 imx: mx6ul_14x14_evk add basic board support
1. Add USDHC, I2C, UART, 74LV, USB, QSPI support.
2. Support SPL
3. CONFIG_MX6UL_14X14_EVK_EMMC_REWORK is introduced, this board default
   supports sd for usdhc2, but can do hardware rework to make usdhc2 support
   emmc.

Boot Log:
U-Boot SPL 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59)
reading u-boot.img
reading u-boot.img

U-Boot 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59 +0800)

CPU:   Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz)
CPU:   Commercial temperature grade (0C to 95C)CPU:   Thermal invalid data, fuse: 0x0
 - invalid sensor device
 Reset cause: POR
 Board: MX6UL 14x14 EVK
 I2C:   ready
 DRAM:  512 MiB
 MMC:   FSL_SDHC: 0, FSL_SDHC: 1
 *** Warning - bad CRC, using default environment

 In:    serial
 Out:   serial
 Err:   serial
 Net:   CPU Net Initialization Failed
 No ethernet found.
 Hit any key to stop autoboot:  0

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-08-02 11:05:09 +02:00
Nikita Kiryanov
b406f90342 arm: mx6: cm-fx6: setup hdmi only on hdmi enable
Refactor display code to only setup hdmi if do_enable_hdmi() is invoked.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-08-02 10:51:37 +02:00
Nikita Kiryanov
3329949949 arm: mx6: cm-fx6: add support for displaytype env var
Add support for selecting display preset using the environment variable
"displaytype". This is a preparation for future merging of compulab
omap3_display.c display selection code with the cm-fx6 display selection code.

The "panel" environment variable is retained for backwards compatibility.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-08-02 10:51:37 +02:00
Nikita Kiryanov
4377859aa6 arm: mx6: cm-fx6: make it possible to not init display
Implement a cm-fx6 specific board_video_skip() to provide the option to not
initialize the display.

The new function does not init display if the environment variable "panel" is
not defined, or if it is set to an unsupported value.

Collateral changes:
- Don't use the global displays array (it's CONFIG_IMX_VIDEO_SKIP specific).
- Don't use detect_hdmi(), since env controlled init makes it unnecessary.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
2015-08-02 10:51:37 +02:00
Nikita Kiryanov
75dbbbfdf3 arm: mx6: cm-fx6: map HDMI to IPU1 DI0 explicitly
U-Boot does not explicitly assign the display to an IPU interface. Instead, it
relies on the power-on default of DI0.

Since the kernel reassigns HDMI display to DI1, after a warm reset the HDMI
display no longer works in U-Boot.

Fix this by explicitly assigning HDMI to IPU1 DI0 in U-Boot.

Cc: Stefano Babic <sbabic@denx.de>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2015-08-02 10:51:37 +02:00
Peng Fan
361b715bbf imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board support
1. Add DDR script for mx6qpsabreauto board.
2. On CPU3 board, enet RGMII tx clock is from internal PLL. Set the GPR5[9]
   and init the enet pll output to 125Mhz.
3. On CPU3 board, SW1ABC=VDDSOC_IN, SW2=VDDARM_IN.

Build target: mx6qpsabreauto_config

Boot Log:
U-Boot 2015.07-rc2-00071-gfd985ff (Jun 29 2015 - 22:10:55 +0800)

CPU:   Freescale i.MX6QP rev1.0 996 MHz (running at 792 MHz)
CPU:   Automotive temperature grade (-40C to 125C) at 34C
Reset cause: POR
Board: MX6Q-Sabreauto revA
I2C:   ready
DRAM:  2 GiB
PMIC:  PFUZE100 ID=0x10
Flash: 32 MiB
NAND:  0 MiB
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default environment

No panel detected: default to HDMI
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0

Note:
In this patch, we still add a new config mx6qpsabreauto_config,
since SPL is not supported now, and IMX_CONFIG is needed at
build time, so add this config. Future, when SPL is converted,
this config can be removed.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Robin Gong <b38343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-08-02 10:47:52 +02:00
Peng Fan
e6fc8995d6 imx: mx6sabresd/sabreauto runtime setting fdt_file
Detect the SOC and board variant at runtime and change the dtb name,
but not hardcoding the fdt_file env variable.

Take the following patch as a reference.
Íd58699b157df75f1aa0b363ea9c21add21a0c
"mx6cuboxi: Load the correct 'fdtfile' variable"

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2015-08-02 10:47:05 +02:00
Tom Rini
8968b914be Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2015-07-31 20:16:21 -04:00
Priyanka Jain
f2af1c37a0 powerpc/T104xRDB: Remove vbank check redundant code
sw variable in checkboard function is storing vbank value
which can only take 3-bit value.
So check of sw value for if greater than 7 is redundant.

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-31 08:56:11 -07:00
Shengzhou Liu
e04dd12bf1 powerpc/t1023rdb: eMMC boot without external SD card
eMMC has no CD and WP pins, it needs to add board-specific
board_mmc_getcd() and board_mmc_getwp() in SPL to support
eMMC boot without external SD card inserted.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-31 08:50:19 -07:00
Shengzhou Liu
ff7ea2d18b powerpc/t1023rdb: add support for T1023RDB RevC
Add support for NOR flash and GPIO/I2C switch control on RevC.
- NOR support
- bank0/bank4 switch
- SD/eMMC switch
- board version

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-31 08:50:18 -07:00
Aneesh Bansal
73cc2f50eb powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P5020 and P5040
Secure Boot Target is added for NAND for P5020 and P5040.
The Secure boot target has already been added for P3041 by
enabling CONFIG_SYS_RAMBOOT and configuring CPC as SRAM.

The targets for P5020 and P5040 are added in the same manner.

Signed-off-by: Saksham Jain <saksham@freescale.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-31 08:50:18 -07:00
Aneesh Bansal
467a40dfe3 powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041
Secure Boot Target is added for NAND for P3041.
For mpc85xx SoCs, the core begins execution from address 0xFFFFFFFC.
In case of secure boot, this default address maps to Boot ROM.
The Boot ROM code requires that the bootloader(U-boot) must lie
in 0 to 3.5G address space i.e. 0x0 - 0xDFFFFFFF.

In case of NAND Secure Boot, CONFIG_SYS_RAMBOOT is enabled and CPC is
configured as SRAM. U-Boot binary will be located on SRAM configured
at address 0xBFF00000.
In the U-Boot code, TLB entries are created to map the virtual address
0xFFF00000 to physical address 0xBFF00000 of CPC configured as SRAM.

Signed-off-by: Saksham Jain <saksham@freescale.com>
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-31 08:50:18 -07:00
Tom Rini
cc35734358 Merge branch 'master' of git://git.denx.de/u-boot-tegra 2015-07-29 18:58:39 -04:00
Priyanka Jain
fa9ccff835 powerpc/t104x, t102x: Update CPC debug register value in PBI commands
Update PBI command in pbi_cfg files to keep register bit
to default reset value while configuring CPC
as SRAM

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-28 14:41:15 -07:00
Shaohui Xie
f57709ab18 powerpc/t4rdb: fix cpld reset altbank
cpld reset altbank should always reset to bank4 no matter what
current bank is.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-28 14:41:15 -07:00
Ying Zhang
01a6113d2a powerpc/p2020rdb: fix the FDT_ERR_NOTFOUND issue
Because the function ft_board_setup() delete the USB2 device node, it
leads to can't find the device node and hung up.

In fact only P1020RDB needs to delete the USB2 node, this patch fixes
this issue.

Signed-off-by: Ying Zhang <b40530@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-28 14:41:15 -07:00
gaurav rana
e622d9ed3b powerpc/T104xD4: Add Secure boot support for T104xD4RDB platforms
defconfig files are added and SFP version for these platforms
is updated.

Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-28 14:41:14 -07:00
Priyanka Jain
4b6067ae9d powerpc/T104xD4RDB: Add T104xD4RDB boards support
T1040D4RDB is a Freescale reference board that hosts the T1040 SoC.
    T1040D4RDB is re-designed T1040RDB board with following changes :
    - Support of DDR4 memory
    - Support of 0x66 serdes protocol which can support following interfaces
        - 2 RGMII's on DTSEC4, DTSEC5
        - 1 SGMII on DTSEC3
    - Support of QE-TDM

    Similarily T1042D4RDB is a Freescale reference board that hosts the T1040
    SoC. T1042D4RDB is re-designed T1042RDB board with following changes :
    - Support of DDR4 memory
    - Support for 0x86 serdes protocol which can support following interfaces
        - 2 RGMII's on DTSEC4, DTSEC5
        - 3 SGMII on DTSEC1, DTSEC2 & DTSEC3
    - Support of DIU

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-07-28 14:40:57 -07:00
Tom Warren
873e3ef90b T210: Add support for 64-bit T210-based P2571 board
Based on Venice2, incorporates Stephen Warren's
latest P2571 pinmux table.

With Thierry Reding's 64-bit build fixes, this
will build and and boot in 64-bit on my P2571
(when used with a 32-bit AVP loader).

Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-07-28 10:30:20 -07:00
Tom Rini
66d10c18bf Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze 2015-07-28 11:31:21 -04:00
Michal Simek
260bdf07a3 zynq: Fix typo in Makefile about custom ps7_init file
Trivial fix.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:28 +02:00
Michal Simek
a0736efbe2 zynqmp: Show EL level where U-Boot runs
Add one more print to make clear which EL level U-Boot runs.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:27 +02:00
Michal Simek
6fe6f13509 ARM: zynqmp: Wire up SATA for the board
Enable SATA for the ZynqMP targets.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:27 +02:00
Michal Simek
cb7ea82059 ARM: zynqmp: Wire up ethernet controllers
Wire up ethernet controllers and enable MII and BOOTP options.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:27 +02:00
Siva Durga Prasad Paladugu
0b54a9dd09 zynqmp: Define ep config for ZynqMP
Define a new config "zynqmp_ep" for ZynqMP instead
of xilinx_zynqmp. This defconfig supports all emulation
platforms of ZynqMP. Also renamed TARGET_XILINX_ZYNQMP
to ARCH_ZYNQMP.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:19 +02:00
Siva Durga Prasad Paladugu
7558000721 zynqmp: Kconfig: Move zynqmp Kconfig
Move the zynqmp Kconfig from board to arch
as there may be different boards under same
architecture.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-07-28 11:56:19 +02:00
Simon Glass
6a6800bfb7 tegra: nyan-big: Allow TPM on I2C
Enable the I2C3 pins so that the TPM can be used.

Note: There is an DP change also, caused by running board-to-uboot.py
script in the latest tegra-pinmux-script tree.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-07-27 14:03:07 -07:00
Nishanth Menon
59d4cd2297 board: ks2_evm: get rid of bogus CONFIG_LINUX_BOOT_PARAM_ADDR
CONFIG_LINUX_BOOT_PARAM_ADDR is not a valid configuration option. Do
just like what the rest of the world does.

Acked-by: Vitaly Andrianov <vitalya@ti.com>
Acked-By: Murali Karicheri <m-karicheri2@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
2015-07-27 15:02:18 -04:00
Antonio Borneo
089fddfde2 stm32f429: pass the device unique ID in DTB
Read device unique ID and set environment variable "serial#".
Value would then be passed to kernel through DTB.

To read ID from DTB, kernel is required to have commit:
3f599875e5202986b350618a617527ab441bf206 (ARM: 8355/1: arch: Show
the serial number from devicetree in cpuinfo)
This commit is already mainline since v4.1-rc1.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
To: Albert Aribaud <albert.u.boot@aribaud.net>
To: Tom Rini <trini@konsulko.com>
To: Kamil Lulko <rev13@wp.pl>
Cc: u-boot@lists.denx.de
2015-07-27 15:02:14 -04:00
Masahiro Yamada
b0c8f4a797 Kill unneeded #include <linux/kconfig.h>
Because the top-level Makefile forces all the source files
to include include/linux/kconfig.h (see the UBOOTINCLUDE define),
these includes are redundant.

By the way, there are exceptions for the statement above; host
programs.  In fact, host tools in U-Boot depend on a particular
board configuration, although I think they should not.  So, some
files still include <linux/config.h> to work around build errors
on host tools.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-27 15:02:12 -04:00
Nishanth Menon
3c963d2a44 board: ks2: README: fix typos
Fix up a few typos in documentation.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Murali Karicheri <m-karicheri2@ti.com>
2015-07-27 15:02:11 -04:00
Paul Kocialkowski
60c7c30aa0 omap-common: Common boot code OMAP3 support and cleanup
This introduces OMAP3 support for the common omap boot code, as well as a
major cleanup of the common omap boot code.

First, the omap_boot_parameters structure becomes platform-specific, since its
definition differs a bit across omap platforms. The offsets are removed as well
since it is U-Boot's coding style to use structures for mapping such kind of
data (in the sense that it is similar to registers). It is correct to assume
that romcode structure encoding is the same as U-Boot, given the description
of these structures in the TRMs.

The original address provided by the bootrom is passed to the U-Boot binary
instead of a duplicate of the structure stored in global data. This allows to
have only the relevant (boot device and mode) information stored in global data.
It is also expected that the address where the bootrom stores that information
is not overridden by the U-Boot SPL or U-Boot.

The save_omap_boot_params is expected to handle all special cases where the data
provided by the bootrom cannot be used as-is, so that spl_boot_device and
spl_boot_mode only return the data from global data.

All of this is only relevant when the U-Boot SPL is used. In cases it is not,
save_boot_params should fallback to its weak (or board-specific) definition.
save_omap_boot_params should not be called in that context either.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
2015-07-27 15:02:03 -04:00
Otavio Salvador
f33abe39fd cgtqmx6eval: Align DCD settings with Congatec's U-boot
Use the same DCD settings from Congatec's U-boot tree for
the P/N 016113 card.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26 12:36:16 +02:00
Otavio Salvador
6731bc8db4 cgtqmx6eval: Add SATA support
Add SATA support.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26 12:36:10 +02:00
Otavio Salvador
6d551f2705 cgtqmx6eval: Add splash screen support
Add LVDS and HDMI support.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26 12:35:56 +02:00
Otavio Salvador
95246ac709 cgtqmx6eval: Add USB support
Add USB support.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26 12:29:53 +02:00
Otavio Salvador
4c9929d63a cgtqmx6eval: Add PMIC support
cgtqmx6eval has a PFUZE100 FSL PMIC connected to I2C2.

Add support for it.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26 12:29:13 +02:00
Otavio Salvador
45e4d3504a cgtqmx6eval: Add ESDHC3 support
cgtqmx6eval has an eMMC connected to ESDHC3.

Add support for it.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26 12:21:59 +02:00
Otavio Salvador
dbcb6ffb37 cgtqmx6eval: Fit into single lines
There is no need to use multiple lines when they fit into a single line.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26 12:21:58 +02:00
Otavio Salvador
516a863ef4 cgtqmx6eval: Improve the error handling
Perfoming an OR operation on the error is not a good approach.

Return the error immediately for each ESDHC instance instead.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26 12:21:58 +02:00
Otavio Salvador
6b3496f7ba cgtqmx6eval: Staticize when possible
Declare 'static' when possible.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-07-26 12:21:58 +02:00
Fabio Estevam
42acd1874f mx6sxsabresd: Use 'int' for return values
The variable 'ret' is used to store the value returned by pfuze_mode_init(),
so it should be of type 'int' instead of 'unsigned int' in order to
correctly handle negative numbers.

Fix the variable type.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-07-26 12:12:04 +02:00
Fabio Estevam
e4b984d75e mx6sabresd: Use 'int' for return values
The variable 'ret' is used to store the value returned by pfuze_mode_init(),
so it should of type 'int' instead of 'unsigned int' in order to correctly
handle negative numbers.

Fix the variable type.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-07-26 12:12:04 +02:00
Fabio Estevam
44f98f9c8e warp: Add MAX77696 support
Warp has a MAX77696 PMIC connected via I2C1 bus.

Add support for it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2015-07-26 12:12:04 +02:00
Stefan Roese
452308c02b arm: mx6: tqma6: Add WRU-IV baseboard for the TQMa6 SoM
This patch adds support for the "OHB System AG" baseboard
with is equipped with the TQMa6S SoM.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Markus Niebel <Markus.Niebel@tq-group.com>
Cc: Stefano Babic <sbabic@denx.de>
2015-07-26 12:05:22 +02:00