Commit graph

160 commits

Author SHA1 Message Date
Kumar Gala
e009cdeb63 powerpc: Fix FPU post related link warnings
If we built POST on PPC's that didn't enable CONFIG_SYS_POST_FPU we'd
get the following warning with newer toolchains:

powerpc-linux-gnu-ld: Warning: lib_powerpc/fpu/libpostpowerpcfpu.o
		      uses hard float, libpost.o uses soft float

We actually worked around this sometime ago with the following commit:

commit ce82ff0538
Author: Yuri Tikhonov <yur@emcraft.com>
Date:   Sat Dec 20 14:54:21 2008 +0300

   FPU POST: fix warnings when building with 2.18 binutils

However, this only took into effect if CONFIG_SYS_POST_FPU was enabled.
We can simply move the GNU_FPOST_ATTR out of the CONFIG_SYS_POST_FPU
ifdef block to address the issue.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-01-25 21:16:08 +01:00
Stefan Roese
ac69243d83 ppc4xx/POST: Change ethernet test loop count to a default of 10
This patch changes the PPC4xx ethernet POST loop test count from
currently 192 (256 - 64) to a default of 10. While doing this the max
frame size is increased. Each loop run uses a different frame size,
starting with a max of 1514 bytes, down to 64. The default loop
count of 10 can be overriden using CONFIG_SYS_POST_ETH_LOOPS in the
board config header.

The TEST_NUM loop has been removed as it was never used.

The main reason for this change is to reduce the boot time on boards
using this POST test, like the lwmon5 board. This change reduces the
boot time by about 600ms on the lwmon5 board.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
2010-12-17 09:44:32 +01:00
Stefan Roese
28e94bb2f7 ppc4xx/POST: Handle cached SDRAM correctly in Denali (440EPx) ECC POST
This patch fixes a problem in the Denali (440EPx) SDRAM ECC POST test.
When cache is enabled in the SDRAM area, the values written to SDRAM
need to be flushed from cache to SDRAM using the dcfb instruction.

Without this patch the POST ECC test failed. Now its working again on
platforms with cache enabled in SDRAM.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-11-28 11:06:47 +01:00
Wolfgang Denk
b9d77535e9 Merge branch 'master' of git://git.denx.de/u-boot-i2c 2010-11-19 22:02:40 +01:00
Sebastien Carlier
6d8962e814 Switch from archive libraries to partial linking
Before this commit, weak symbols were not overridden by non-weak symbols
found in archive libraries when linking with recent versions of
binutils.  As stated in the System V ABI, "the link editor does not
extract archive members to resolve undefined weak symbols".

This commit changes all Makefiles to use partial linking (ld -r) instead
of creating library archives, which forces all symbols to participate in
linking, allowing non-weak symbols to override weak symbols as intended.
This approach is also used by Linux, from which the gmake function
cmd_link_o_target (defined in config.mk and used in all Makefiles) is
inspired.

The name of each former library archive is preserved except for
extensions which change from ".a" to ".o".  This commit updates
references accordingly where needed, in particular in some linker
scripts.

This commit reveals board configurations that exclude some features but
include source files that depend these disabled features in the build,
resulting in undefined symbols.  Known such cases include:
- disabling CMD_NET but not CMD_NFS;
- enabling CONFIG_OF_LIBFDT but not CONFIG_QE.

Signed-off-by: Sebastien Carlier <sebastien.carlier@gmail.com>
2010-11-17 21:02:18 +01:00
Heiko Schocher
9b107e6138 post, i2c: add missing curly bracket in i2c_post_test
If CONFIG_SYS_POST_I2C_ADDRS is not defined and CONFIG_SYS_POST_I2C
is activated, i2c_probe() is not called in the for statement,
because missing curly bracket.

Signed-off-by: Heiko Schocher <hs@denx.de>
2010-11-17 08:04:03 +01:00
Wolfgang Denk
2e5167ccad Replace CONFIG_RELOC_FIXUP_WORKS by CONFIG_NEEDS_MANUAL_RELOC
By now, the majority of architectures have working relocation
support, so the few remaining architectures have become exceptions.
To make this more obvious, we make working relocation now the default
case, and flag the remaining cases with CONFIG_NEEDS_MANUAL_RELOC.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Tested-by: Reinhard Meyer <u-boot@emk-elektronik.de>
2010-10-29 21:32:07 +02:00
Wolfgang Denk
071bc92330 Coding Style cleanup
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-10-27 22:48:30 +02:00
Wolfgang Denk
8343f8a764 post/drivers/i2c.c: fix compile error
Commit 7e263ce "post/i2c: Clean up detection logic" added a "const"
qualifier to the declaration of i2c_addr_list[], missing the fact that
the list gets modified later in the code, which results in build
errors like these:

i2c.c: In function 'i2c_post_test':
i2c.c:88: error: assignment of read-only location

Remove the incorrect "const".

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
2010-10-27 20:09:59 +02:00
Peter Tyser
9d921f19b3 post/i2c: Add ability to ignore I2C devices
Add the ability to not report an I2C POST error for a set of given I2C
addresses on bootup.  This is useful for cases when a device may or may
not be present, and neither case is considered an error.  For example:

- Some form factors such as XMC and Compact PCI Express have an I2C
  EEPROM whose address changes based on geographical address.  Eg
  installed in one slot its EEPROM address is, 0x50, in another its
  0x51, etc.  This allows multiple devices to have their EEPROMs present
  on the same I2C bus.  Thus the I2C devices present for an XMC or
  CPCIe card depend on if and where other cards are installed in the
  same system.

- Some cards have optional I2C devices.  Eg one hardware build
  configuration has different I2C devices than another and software
  can't determine if the optional device should be present or not.

- Some cards have optional daughtercards with I2C devices on them.

- I2C EEPROMs address range depends on their size.  Its possible to
  support differently size EEPROMs by only probing the EEPROM's base
  address and ignoring the other addresses that are impacted by its
  size.

A new CONFIG_SYS_POST_I2C_IGNORES define has been added which specifies
a list of I2C addresses for the I2C POST to ignore.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Heiko Schocher <hs@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-22 02:19:14 -05:00
Peter Tyser
60aaaa0782 post/i2c: Rename I2C_ADDR_LIST to CONFIG_SYS_POST_I2C_ADDRS
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Heiko Schocher <hs@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-22 02:19:00 -05:00
Peter Tyser
9f949c9ac2 post/i2c: Don't probe address 0
According to the I2C specification device address 0 is the "general call
address", ie a broadcast address.  The I2C specification states that the
format of a general call uses at least 2 bytes, which U-Boot's probing
routine does not adhere to.

Not probing device address 0 will prevent possible issues with devices
that accept general calls.  Additionally, this change shouldn't reduce
POST coverage since each I2C device should still be accessed via its
own, unique address.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Heiko Schocher <hs@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-22 02:18:42 -05:00
Peter Tyser
7e263cea88 post/i2c: Clean up detection logic
The logic previously used in the I2C post was a bit convoluted.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Heiko Schocher <hs@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-22 02:18:36 -05:00
Peter Tyser
b9b1bc8542 post/i2c: General clean up
- Clean up ifdeffery
- Update coding style

No functional change should have occurred.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Acked-by: Heiko Schocher <hs@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-22 02:18:30 -05:00
Stefan Roese
834a45d7ee ppc4xx/POST: Add board specific UART POST test to lwmon5
Add CONFIG_POST_UART to implement a board specific UART POST test.
This is done since lwmon5 needs to set POST_ALWAYS to run this
test on each reboot. And we don't want to change the default
behavious of this this.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-10-20 10:08:08 +02:00
York Sun
284170309c Expand POST memory test to support arch-depended implementation.
Add weak functions to enable architecture depended preparation, address
advancing, cleaning up and error handling.

These weak functions provides the framwork to implemente arch/platform
dependent code for initializing/maintenance/restore the start address, size,
physical address as well as memory mapping before/between/after memory test.
arch_memory_failure_handle can also be implemented in case more care is needed
for arch/platform.

Signed-off-by: York Sun <yorksun@freescale.com>
2010-10-19 22:28:59 +02:00
Stefan Roese
5d7c73e65b ppc4xx: Use common ns16550 functions in 4xx UART POST driver
This patch changes the PPC4xx POST UART driver to use the common
NS16550 functions for receiving and sending. Additionally the
local function for SoC divisor setup are removed. Instead the
functions from arch/powerpc/cpu/ppc4xx/4xx_uart.c are used. This
removes code duplication.

Also the common CONFIG_SYS_NS16550_COMx defines are now used
to describe the POST UART's.

And a compile breakage is fixed, introduced by a git merge of
the ppc4xx/next branch into master. Now "ppc4xx.h" is moved to
"asm/ppc4xx.h". Fixed as well with this patch.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-10-04 11:20:02 +02:00
Sascha Laue
f14ae4180a ppc4xx: Big lwmon5 board support rework/update
This patch brings the lwmon5 board support up-to-date. Here a
summary of the changes:

lwmon5 board port related:
- GPIO's changed to control the LSB transmitter
- Reset USB PHY's upon power-up
- Enable CAN upon power-up
- USB init error workaround (errata CHIP_6)
- EBC: Enable burstmode and modify the timings for the GDC memory
- EBC: Speed up NOR flash timings

lwmon5 board POST related:
- Add FPGA memory test
- Add GDC memory test
- DSP POST reworked
- SYSMON POST: Fix handling of negative temperatures
- Add output for sysmon1 POST
- HW-watchdog min. time test reworked

Additionally some coding-style changes were done.

Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
Signed-off-by: Stefan Roese <sr@denx.de>
2010-10-04 11:19:35 +02:00
Wolfgang Denk
2e6e1772c0 Merge branch 'next' of /home/wd/git/u-boot/next
Conflicts:
	include/ppc4xx.h

Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-09-28 23:30:47 +02:00
Stefan Roese
0988776288 ppc4xx: Move gpio.h to ppc4xx-gpio.h since its ppc4xx specific
Signed-off-by: Stefan Roese <sr@denx.de>
2010-09-23 09:02:05 +02:00
Stefan Roese
b36df56115 ppc4xx: Move ppc4xx headers to powerpc include directory
This patch moves some ppc4xx related headers from the common include
directory (include/) to the powerpc specific one
(arch/powerpc/include/asm/). This way to common include directory is not
so cluttered with files.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-09-23 09:02:05 +02:00
Stefan Roese
ab25e880ca ppc4xx: POST UART: Use in/out_8() io-accessor functions
This patch fixes a problem in the PPC4xx POST UART driver. This driver
incorrectly used the in/out8() io-accessor functions. This could lead to
problems since these functions don't guarantee execution ordering. This
patch now replaces these functions with the correct ones.

Additionally the driver is converted to using the NS16550 struct instead
of macros for the register offsets.

And some common code is factored out for better maintainability.

Signed-off-by: Stefan Roese <sr@denx.de>
2010-09-23 08:43:56 +02:00
Michael Zaidman
800eb09641 POST cleanup.
- Revives POST for blackfin arch;
- Removes redundant code:
     arch/blackfin/lib/post.c
     arch/powerpc/cpu/ppc4xx/commproc.c
     arch/powerpc/cpu/mpc512x/common.c
- fixes up the post_word_{load|store} usage.

Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Acked-by: Detlev Zundel <dzu@denx.de>
Tested-by: Anatolij Gustschin <agust@denx.de>

List of the maintainers of the affected by patch boards:
Cc: Stephan Linz <linz@li-pro.net>
Cc: Denis Peter <d.peter@mpl.ch>
Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Niklaus Giger <niklaus.giger@netstal.com>
Cc: Larry Johnson <lrj@acm.org>
Cc: Feng Kan <fkan@amcc.com>
2010-09-21 21:39:31 +02:00
Wolfgang Denk
cdb749778a Rename getenv_r() into getenv_f()
While running from flash, i. e. before relocation, we have only a
limited C runtime environment without writable data segment. In this
phase, some configurations (for example with environment in EEPROM)
must not use the normal getenv(), but a special function.  This
function had been called getenv_r(), with the idea that the "_r"
suffix would mean the same as in the _r_eentrant versions of some of
the C library functions (for example getdate vs. getdate_r, getgrent
vs. getgrent_r, etc.).

Unfortunately this was a misleading name, as in U-Boot the "_r"
generally means "running from RAM", i. e. _after_ relocation.

To avoid confusion, rename into getenv_f() [as "running from flash"]

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
2010-08-04 00:45:36 +02:00
Michael Zaidman
93c7e70f64 POST: Added ECC memory test for mpc83xx.
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>

Fixed minor coding style issue.
Signed-off-by: Wolfgang Denk <wd@denx.de>
2010-05-06 00:00:24 +02:00
Anatolij Gustschin
29fd7ceb3c mpc5121: pdm360ng: add coprocessor POST
Adds coprocessor communication POST code

Signed-off-by: Anatolij Gustschin <agust@denx.de>
2010-04-24 22:56:41 +02:00
Stefan Roese
a47a12becf Move arch/ppc to arch/powerpc
As discussed on the list, move "arch/ppc" to "arch/powerpc" to
better match the Linux directory structure.

Please note that this patch also changes the "ppc" target in
MAKEALL to "powerpc" to match this new infrastructure. But "ppc"
is kept as an alias for now, to not break compatibility with
scripts using this name.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Anatolij Gustschin <agust@denx.de>
2010-04-21 23:42:38 +02:00
Peter Tyser
8d1f268204 ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2010-04-13 09:13:16 +02:00
Michael Zaidman
e070a56c77 POST: add progress API
Add POST progress API implemented as weak calls before and after
each call to the POST test callback in the post_run_single routine
of the post.c file.

Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Acked-by: Detlev Zundel <dzu@denx.de>
2010-03-21 22:44:58 +01:00
Stefan Roese
39ff7d5f4c POST: Remove duplicated post_hotkey_pressed() functions
This patch introduces a weak default function for post_hotkey_pressed(),
returning 0, for boards without hotkey support. The long-running tests
won't be started on those boards. This default function was implemented
in many board directories. By implementing this weak default we can
remove all those duplicate versions.

Boards with hotkey support, can override this weak default function
by defining one in their board specific code.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-12-07 22:44:31 +01:00
Wolfgang Denk
cd77dd109c Merge branch 'reloc' 2009-10-09 00:03:18 +02:00
Niklaus Giger
ddc922ff2c ppc_4xx: Apply new HW register names
Modify all existing *.c files to use the new register names
as seen in the AMCC manuals.

Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-10-07 09:15:20 +02:00
Peter Tyser
521af04d85 Conditionally perform common relocation fixups
Add #ifdefs where necessary to not perform relocation fixups.  This
allows boards/architectures which support relocation to trim a decent
chunk of code.

Note that this patch doesn't add #ifdefs to architecture-specific code
which does not support relocation.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-10-03 10:17:57 +02:00
Peter Tyser
80f73b92a1 lwmon, lwmon5: Remove sysmon POST relocation fixups
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
2009-10-03 10:17:56 +02:00
Stefan Roese
d1c3b27525 ppc4xx: Big cleanup of PPC4xx defines
This patch cleans up multiple issues of the 4xx register (mostly
DCR, SDR, CPR, etc) definitions:

- Change lower case defines to upper case (plb4_acr -> PLB4_ACR)
- Change the defines to better match the names from the
  user's manuals (e.g. cprpllc -> CPR0_PLLC)
- Removal of some unused defines

Please test this patch intensive on your PPC4xx platform. Even though
I tried not to break anything and tested successfully on multiple
4xx AMCC platforms, testing on custom platforms is recommended.

Signed-off-by: Stefan Roese <sr@denx.de>
2009-09-11 10:35:58 +02:00
Matthias Fuchs
58ea142fb2 ppc4xx: Replace 4xx lowercase SPR references
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
2009-07-24 06:47:17 +02:00
Jean-Christophe PLAGNIOL-VILLARD
52cb4d4fb3 stdio/device: rework function naming convention
So far the console API uses the following naming convention:

	======Extract======
	typedef struct device_t;

	int	device_register (device_t * dev);
	int	devices_init (void);
	int	device_deregister(char *devname);
	struct list_head* device_get_list(void);
	device_t* device_get_by_name(char* name);
	device_t* device_clone(device_t *dev);
	=======

which is too generic and confusing.

Instead of using device_XX and device_t we change this
into stdio_XX and stdio_dev

This will also allow to add later a generic device mechanism in order
to have support for multiple devices and driver instances.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Edited commit message.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-07-18 00:27:46 +02:00
Wolfgang Denk
97b05d7d52 mpc8xx/ether.c: fix warning: unused variable 'bd'
Also minor coding style cleanup.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2009-03-28 16:17:29 +01:00
Mike Frysinger
6bacfa6a8e cpu/: get mac address from environment
The environment is the canonical storage location of the mac address, so
we're killing off the global data location and moving everything to
querying the env directly.

The cpus that get converted here:
	at91rm9200
	mpc512x
	mpc5xxx
	mpc8260
	mpc8xx
	ppc4xx

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
CC: Ben Warren <biggerbadderben@gmail.com>
CC: John Rigby <jrigby@freescale.com>
CC: Stefan Roese <sr@denx.de>
2009-03-20 22:39:11 +01:00
Yuri Tikhonov
ce82ff0538 FPU POST: fix warnings when building with 2.18 binutils
When compile u-boot with the 2.18 binutils the following
warning messages for each object file in post/lib_ppc/fpu/ is
produced at the linking stage:

post/libpost.a(acc1.o) uses hard float, u-boot uses soft-float
...

This is because of the fact that, in general, the soft-float and
hard-float ABIs are incompatible; the 2.18 binutils do checking
of the Tag_GNU_Power_ABI_FP attribute of the files to be linked, and
produce the worning like above if these are not compatible.

The incompatibility of ABIs is concerned only the float values:
e.g. the soft-float ABI assumes the float argument passing in the
pair of rX registers, and the hard-float ABI assumes passing of
the float argument in the fX register. When we don't pass the float
arguments between the functions compiled with different floatness,
then such an application will work correctly.
This is the case for the FPU POST: u-boot (compiled with soft-float)
doesn't pass to (and doesn't get from) the FPU POST functions any
floats; there are no functions exported from the post/lib_ppc/fpu/
objects which would work with float parameters/returns too. So, we
can reassure the linker not to worry about the difference in ABI
attributes of linking files just by setting the 'soft-float'
attribute for the objects in post/lib_ppc/fpu. And this patch does
this.

Also, to avoid passing both soft- and hard-float options in CFLAGS
when compiling the files from post/lib_ppc/fpu (which is OK, but
looks rather dirty) this patch removes the soft-float string from
CFLAGS in post/lib_ppc/fpu/Makefile.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2009-01-24 01:49:41 +01:00
Wolfgang Denk
aa1bcca3d2 post/Makefile: fix dependency problem with parallel builds
Parallel builds (using "make -jN") would occasionally fail with error
messages like
	ppc_4xxFP-objdump: string.o: File format not recognized
or
	post/libpost.a(cpu.o): In function `cpu_post_test':
	/home/wd/git/u-boot/work/post/lib_ppc/cpu.c:130: undefined reference to `cpu_post_test_string'
or similar. We now make sure to run the 'postdeps" step before
attempting to build the specific POST libraries.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-12-16 14:44:06 +01:00
Yuri Tikhonov
45845301af POST Make: fix the sub-dir dependencies missing.
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
2008-12-15 22:02:15 +01:00
Jean-Christophe PLAGNIOL-VILLARD
6d0f6bcf33 rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2008-10-18 21:54:03 +02:00
Stefan Roese
f2302d4430 Fix merge problems
Signed-off-by: Stefan Roese <sr@denx.de>
2008-08-06 14:05:38 +02:00
Sascha Laue
5744ddc663 Configure DSP POST; add watchdog reset to diag command
Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
2008-06-29 19:19:35 +02:00
Wolfgang Denk
1730edf76c Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xx 2008-06-11 22:13:07 +02:00
Stefan Roese
b2815f7928 ppc4xx: Fix misspelled CONFIG_440SPE/440EPX/GRX config options
We use upper case letters for the AMCC processor defines (like
CONFIG_440SPE) in U-Boot. So the 440SPe is labeled CONFIG_440SPE and
not CONFIG_440SPe. This patch fixes the last misspelled config options.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-06-06 16:10:41 +02:00
Sascha Laue
6956d53d99 lwmon5: add memory-pattern-test to FPGA POST. 2008-06-03 19:30:07 +02:00
Wolfgang Denk
eddc7c46c6 Merge branch 'lwmon5' of /home/wd/git/u-boot/projects 2008-05-21 01:13:39 +02:00
Wolfgang Denk
53677ef18e Big white-space cleanup.
This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
2008-05-21 00:14:08 +02:00