Commit graph

132 commits

Author SHA1 Message Date
Vignesh R
5746b0df9c gpio: Add driver for TI PCF8575 I2C GPIO expander
TI's PCF8575 is a 16-bit I2C GPIO expander.The device features a
16-bit quasi-bidirectional I/O ports. Each quasi-bidirectional I/O can
be used as an input or output without the use of a data-direction
control signal. The I/Os should be high before being used as inputs.
Read the device documentation for more details[1].

This driver is based on pcf857x driver available in Linux v4.7 kernel.
It supports basic reading and writing of gpio pins.

[1] http://www.ti.com/lit/ds/symlink/pcf8575.pdf

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
2016-08-08 13:32:53 -04:00
Stephen Warren
6e7a11e64e dt-bindings: add Tegra186 BPMP I2C binding
In Tegra186, the BPMP (Boot and Power Management Processor) owns certain
HW devices, such as the I2C controller for the power management I2C bus.
Software running on other CPUs must perform IPC to the BPMP in order to
execute transactions on that I2C bus. This binding describes an I2C bus
that is accessed in such a fashion.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-04 13:36:59 -07:00
Stephen Warren
390ae57c76 dt-bindings: allow child nodes inside the Tegra BPMP
The BPMP implements some services which must be represented by separate
nodes. For example, it can provide access to certain I2C controllers, and
the I2C bindings represent each I2C controller as a device tree node.
Update the binding to describe how the BPMP supports this.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-04 13:36:59 -07:00
Stephen Warren
7b9cb49405 ARM: tegra: add BPMP DT bindings
The Tegra BPMP (Boot and Power Management Processor) is a separate
auxiliary CPU embedded into Tegra to perform power management work, and
controls related features such as clocks, resets, power domains, PMIC I2C
bus, etc. These bindings dictate how to represent the BPMP in device tree.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-04 13:36:58 -07:00
Stephen Warren
729c2db7a9 ARM: tegra: adapt to latest HSP DT binding
The DT binding for the Tegra186 HSP module apparently wasn't quite final
when I posted initial U-Boot support for it. Add the final DT binding doc
and adapt all code and DT files to match it.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-08-04 13:36:58 -07:00
Yoshinori Sato
747431b9d5 serial_sh: Add standrad SCI (w/o FIFO) support
Add support for standard type SCI (without FIFO) port.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-07-09 05:51:57 +09:00
Yoshinori Sato
359787cfe4 serial_sh: Device Tree support
Add Device Tree bindings.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2016-07-09 05:51:57 +09:00
Stephen Warren
89c1e2da78 Add a reset driver framework/uclass
A reset controller is a hardware module that controls reset signals that
affect other hardware modules or chips.

This patch defines a standard API that connects reset clients (i.e. the
drivers for devices affected by reset signals) to drivers for reset
controllers/providers. Initially, DT is the only supported method for
connecting the two.

The DT binding specification (reset.txt) was taken from Linux kernel
v4.5's Documentation/devicetree/bindings/reset/reset.txt.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-06-19 17:05:55 -06:00
Bin Meng
2600ba6de0 x86: Update x86-pinctrl driver device-tree-bindings doc
This updates the device-tree-bindings doc for x86-pinctrl driver:

 - clarify "gpio-offset" is required only when "mode-gpio" is set
 - correct property name "pull-strength"
 - use tab instead of space at several places

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-06-12 12:19:35 +08:00
Stephen Warren
074a1fdd27 gpio: add Tegra186 GPIO driver
Tegra186's GPIO controller register layout is significantly different from
previous chips, so add a new driver for it. In fact, there are two
different GPIO controllers in Tegra186 that share a similar register
layout, but very different port mapping. This driver covers both.

The DT binding is already present in the Linux kernel (in linux-next via
the Tegra tree so far).

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org> # v1
Signed-off-by: Tom Warren <twarren@nvidia.com>
2016-05-31 09:54:24 -07:00
Stephen Warren
6238935d01 Add a mailbox driver framework/uclass
A mailbox is a hardware mechanism for transferring small message and/or
notifications between the CPU on which U-Boot runs and some other device
such as an auxilliary CPU running firmware or a hardware module.

This patch defines a standard API that connects mailbox clients to mailbox
providers (drivers). Initially, DT is the only supported method for
connecting the two.

The DT binding specification (mailbox.txt) was taken from Linux kernel
v4.5's Documentation/devicetree/bindings/mailbox/mailbox.txt.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-05-26 20:48:31 -06:00
Tom Rini
2ee490a024 Merge branch 'master' of git://git.denx.de/u-boot-net
Signed-off-by: Tom Rini <trini@konsulko.com>

Conflicts:
	drivers/net/zynq_gem.c
2016-05-24 11:59:02 -04:00
Dan Murphy
c7ba7bdc9d net: phy: dp83867: Add device tree bindings and documentation
Add the device tree bindings and the accompanying documentation
for the TI DP83867 Giga bit ethernet phy driver.

The original document was from:
    [commit 2a10154abcb75ad0d7b6bfea6210ac743ec60897 from the Linux kernel]

Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-05-24 11:42:04 -05:00
Tom Rini
6d54868eeb Merge branch 'master' of git://git.denx.de/u-boot-x86 2016-05-23 18:32:47 -04:00
Bin Meng
d4e61f505b x86: irq: Enable SCI on IRQ9
By default SCI is disabled after power on. ACTL is the register to
enable SCI and route it to PIC/APIC. To support both ACPI in PIC
mode and APIC mode, configure SCI to use IRQ9.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Tested-by: Stefan Roese <sr@denx.de>
2016-05-23 15:18:00 +08:00
Wills Wang
b85dc46072 drivers: spi: add spi support for QCA/Atheros ath79 SOCs
This patch add a compatible spi driver for ath79 series SOC.

Signed-off-by: Wills Wang <wills.wang@live.com>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-05-21 01:25:50 +02:00
Wills Wang
60b49761e9 drivers: serial: add serial driver for ar933x SOC
This patch add support for ar933x serial.

Signed-off-by: Wills Wang <wills.wang@live.com>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-05-21 01:25:50 +02:00
Moritz Fischer
17573c2791 i2c: Describe Cadence I2C devicetree bindings
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2016-04-13 18:29:07 +02:00
York Sun
3c1d218a1d armv8: LS2080A: Consolidate LS2080A and LS2085A
LS2080A is the primary SoC, and LS2085A is a personality with AIOP
and DPAA DDR. The RDB and QDS boards support both personality. By
detecting the SVR at runtime, a single image per board can support
both SoCs. It gives users flexibility to swtich SoC without the need
to reprogram the board.

Signed-off-by: York Sun <york.sun@nxp.com>
CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
2016-04-06 10:26:46 -07:00
Mateusz Kulikowski
120800df72 gpio: Add support for Qualcomm PM8916 gpios
This driver supports GPIOs present on PM8916 PMIC.
There are 2 device drivers inside:
- GPIO driver (4 "generic" GPIOs)
- Keypad driver that presents itself as GPIO with 2 inputs (power and reset)

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:13 -04:00
Mateusz Kulikowski
c2f74c8f53 pmic: Add support for Qualcomm PM8916 PMIC
This PMIC is connected on SPMI bus so needs SPMI support enabled.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:13 -04:00
Mateusz Kulikowski
5b47271c18 drivers: spmi: Add support for Qualcomm SPMI bus driver
Support SPMI arbiter on Qualcomm Snapdragon devices.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:12 -04:00
Mateusz Kulikowski
d33776e43d spmi: Add sandbox test driver
This patch adds emulated spmi bus controller with part of
pm8916 pmic on it to sandbox and tests validating SPMI uclass.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:12 -04:00
Mateusz Kulikowski
5a8221181e ehci: Add support for Qualcomm EHCI
This driver is able to reconfigure OTG controller into HOST mode.
Board can add board-specific initialization as board_prepare_usb().
It requires USB_ULPI_VIEWPORT enabled in board configuration.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:11 -04:00
Mateusz Kulikowski
9d11d12a16 mmc: Add support for Qualcomm SDHCI controller
Add support for SD/eMMC controller present on some Qualcomm Snapdragon
devices. This controller implements SDHCI 2.0 interface but requires
vendor-specific initialization.
Driver works in PIO mode as ADMA is not supported by U-Boot (yet).

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:08 -04:00
Mateusz Kulikowski
81a87e1894 gpio: Add support for Qualcomm gpio controller
Add support for gpio controllers on Qualcomm Snapdragon devices.
This devices are usually called Top Level Mode Multiplexing in
Qualcomm documentation.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:07 -04:00
Mateusz Kulikowski
142a20c367 serial: Add support for Qualcomm serial port
This driver works in "new" Data Mover UART mode, so
will be compatible with modern Qualcomm chips only.

Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-04-01 17:18:07 -04:00
Vagrant Cascadian
a6f70a3d14 Fix spelling of "transferred".
Signed-off-by: Vagrant Cascadian <vagrant@debian.org>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2016-03-22 12:16:16 -04:00
Simon Glass
b24f5c4f27 x86: broadwell: Add a pinctrl driver
GPIO pins need to be set up on start-up. Add a driver to provide this,
configured from the device tree.

The binding is slightly different from the existing ICH6 binding, since that
is quite verbose. The new binding should be just as extensible.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:26 +08:00
Simon Glass
c13dcb3dc7 x86: dts: Update the pinctrl binding a little
Make a few minor updates to make the meaning clearer.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:25 +08:00
Simon Glass
7ac99be6e2 x86: Add an ICH6 pin configuration driver
Add a driver which sets up the pin configuration on x86 devices with an ICH6
(or later) Platform Controller Hub.

The driver is not in the pinctrl uclass due to some oddities of the way x86
devices work:

- The GPIO controller is not present in I/O space until it is set up
- This is done by writing a register in the PCH
- The PCH has a driver which itself uses PCI, another driver
- The pinctrl uclass requires that a pinctrl device be available before any
other device can be probed

It would be possible to work around the limitations by:
- Hard-coding the GPIO address rather than reading it from the PCH
- Using special x86 PCI access to set the GPIO address in the PCH

However it is not clear that this is better, since the pin configuration
driver does not actually provide normal pin configuration services - it
simply sets up all the pins statically when probed. While this remains the
case, it seems better to use a syscon uclass instead. This can be probed
whenever it is needed, without any limitations.

Also add an 'invert' property to support inverting the input.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-03-17 10:27:25 +08:00
Jacob Chen
c87c30e3ba doc: dt-bindings: Describe rockchip LVDS interface
I didn't have a common board to enable LVDS.
So add this dcocument to help others who want to enable LVDS in their board.

Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-03-14 22:24:44 +01:00
Paul Thacker
9e160ee823 drivers: serial: add driver for Microchip PIC32 UART controller.
This adds PIC32 UART controller support based on driver model.

Signed-off-by: Paul Thacker <paul.thacker@microchip.com>
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-02-01 22:14:00 +01:00
Purna Chandra Mandal
a0e7908326 drivers: clk: Add clock driver for Microchip PIC32 Microcontroller.
PIC32 clock module consists of multiple oscillators, PLLs, mutiplexers
and dividers capable of supplying clock to various controllers
on or off-chip.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2016-02-01 22:14:00 +01:00
Tom Rini
82d72a1b99 Merge branch 'master' of git://git.denx.de/u-boot-net 2016-01-28 18:42:10 -05:00
Dinh Nguyen
c16e69f702 net: phy: micrel: add documentation for Micrel KSZ90x1 binding
Add the DTS documentation for the Micrel KSZ90x1 binding.

The original document was from:
[commit 4b405efbe12de28b26289282b431323d73992381 from the Linux kernel]

This takes the original document and adds a clarification on how the skew
values are represented in the code.

References:

Micrel ksz9021rl/rn Data Sheet, Revision 1.2. Dated 2/13/2014.
http://www.micrel.com/_PDF/Ethernet/datasheets/ksz9021rl-rn_ds.pdf

Micrel ksz9031rnx Data Sheet, Revision 2.1. Dated 11/20/2014.
http://www.micrel.com/_PDF/Ethernet/datasheets/KSZ9031RNX.pdf

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28 13:20:29 -06:00
Bin Meng
a1c76c1508 net: tsec: Use priv->tbiaddr to initialize TBI PHY address
Add a new member 'tbiaddr' to tsec_private struct. For non-DM driver,
it is initialized as CONFIG_SYS_TBIPA_VALUE, but for DM driver, we
can get this from device tree. Update the bindings doc as well.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28 12:23:19 -06:00
Bin Meng
69a00875e3 doc: dt-bindings: Describe Freescale TSEC ethernet controller
Adapted from the same file name in the kernel device tree bindings
documentation, to use with U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2016-01-28 12:23:10 -06:00
Tom Rini
4b5a4a0535 Merge branch 'master' of git://git.denx.de/u-boot-x86 2016-01-28 10:07:22 -05:00
Stefan Roese
9b5dbe1358 x86: baytrail: Add documentation for FSP memory-down values
This patch adds the documentation for the memory-down parameters
of the Intel FSP. To configure a board without SPD DDR DIMM but
with onboard DDR chips. The values are taken from the coreboot
header:

	src/soc/intel/fsp_baytrail/chip.h

(git ID da1a70ea from 2016-01-16 as reference).

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Andrew Bradford <andrew.bradford@kodakalaris.com>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-28 13:53:29 +08:00
Michal Simek
93768393d7 serial: uartlite: Move driver to DM
Enable SPL DM too.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-27 15:55:49 +01:00
Thomas Chou
75219d57ef ns16550: replace with binding files from Linux kernel
Replace ns16550.txt with binding files from Linux kernel. As suggested
by Stephen Warren, we should keep the directory structure, filenames,
and file content identical to the bindings in the Linux kernel.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Acked-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-25 10:40:03 -05:00
Simon Glass
61101e0583 dts: Bring in pinctrl device tree binding
Add this binding file since we now use it in U-Boot.

Signed-off-by: Simon Glass <sjg@chromium.org>
2016-01-21 20:42:34 -07:00
Mugunthan V N
c833697538 dm: timer: uclass: add timer init in uclass driver to add timer device
Adding timer init function in timer-uclass driver to create and
initialize the timer device on platforms where u-boot,dm-pre-reloc
is not used. Since there will be multiple timer devices in the
system, adding a tick-timer node in chosen node to know which
timer device to be used as tick timer in u-boot.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
2016-01-20 19:06:21 -07:00
Simon Glass
6b44ae6b06 x86: Add an i8042 device for boards that have it
Some boards have an i8042 device. Enable the driver for all x86 boards, and
add a device tree node for those which may have this keyboard.

Also adjust the configuration so that i8042 is always separate from the VGA,
and rename the stdin driver accordingly. With this commit the keyboard will
not work, but it is fixed in the next commit.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19 20:13:41 -07:00
Thomas Chou
9961a0b6fb sandbox: add a sandbox timer and basic test
Add a sandbox timer which get time from host os and a basic
test.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:13:41 -07:00
Thomas Chou
38a0f36e83 mtd: add altera quadspi driver
Add Altera Generic Quad SPI Controller support. The controller
converts SPI NOR flash to parallel flash interface. So it is
not like other SPI flash, but rather like CFI flash.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
2015-11-12 08:26:58 +08:00
Thomas Chou
f105691043 cfi_flash: convert to driver model
Convert cfi flash to driver model.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-11-12 08:26:58 +08:00
Przemyslaw Marczak
5decbf5300 dm: adc: add simple ADC uclass implementation
This commit adds:
- new uclass id: UCLASS_ADC
- new uclass driver: drivers/adc/adc-uclass.c

The new uclass's API allows for ADC operation on:
* single-channel with channel selection by a number
* multti-channel with channel selection by bit mask

ADC uclass's functions:
* single-channel:
  - adc_start_channel()        - start channel conversion
  - adc_channel_data()         - get conversion data
  - adc_channel_single_shot()  - start/get conversion data
* multi-channel:
  - adc_start_channels()       - start selected channels conversion
  - adc_channels_data()        - get conversion data
  - adc_channels_single_shot() - start/get conversion data for channels
                                 selected by bit mask
* general:
  - adc_stop()      - stop the conversion
  - adc_vdd_value() - positive reference Voltage value with polarity [uV]
  - adc_vss_value() - negative reference Voltage value with polarity [uV]
  - adc_data_mask() - conversion data bit mask

The device tree can provide below constraints/properties:
- vdd-polarity-negative: if true: Vdd = vdd-microvolts * (-1)
- vss-polarity-negative: if true: Vss = vss-microvolts * (-1)
- vdd-supply:            phandle to Vdd regulator's node
- vss-supply:            phandle to Vss regulator's node
And optional, checked only if the above corresponding, doesn't exist:
  - vdd-microvolts:      positive reference Voltage [uV]
  - vss-microvolts:      negative reference Voltage [uV]

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02 10:38:00 +09:00
Przemyslaw Marczak
35d460fbc8 dm: pmic: add s2mps11 PMIC I/O driver
This driver allows I/O operations on the Samsung S2MPS11 PMIC,
which provides lots of LDO/BUCK outputs.

To enable it, update defconfig with:
- CONFIG_PMIC_S2MPS11
and additional, if were not defined:
- CONFIG_CMD_PMIC
- CONFIG_ERRNO_STR

The binding info: doc/device-tree-bindings/pmic/s2mps11.txt

Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2015-11-02 10:38:00 +09:00