Commit graph

19 commits

Author SHA1 Message Date
Stefan Roese
d25dfe08fb ppc4xx: Remove cache definition from 4xx board config files
All 4xx board config files don't need the cache definitions anymore.
These are now defined in common headers.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-10-31 21:21:47 +01:00
Stefan Roese
b706d63559 Merge with git://www.denx.de/git/u-boot.git 2007-08-15 21:06:27 +02:00
Jon Loeliger
5d2ebe1b3e include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-09 21:20:06 -05:00
Matthias Fuchs
0f92c7e7c9 Migrate esd 405EP boards to new NAND subsystem
Remove unused CFG_NAND_LEGACY define

These boards to not have NAND.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2007-07-09 10:55:56 +02:00
Jon Loeliger
49cf7e8ee7 include/configs: Use new CONFIG_CMD_* in various C* named board config files.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
2007-07-07 20:30:36 -05:00
Stefan Roese
466fff1a7b ppc4xx: Add pci_pre_init() for 405 boards
This patch removes the CFG_PCI_PRE_INIT option completely, since
it's not needed anymore with the patch from Matthias Fuchs with
the "weak" pci_pre_init() implementation.

Signed-off-by: Stefan Roese <sr@denx.de>
2007-06-25 15:57:39 +02:00
Matthias Fuchs
6f35c53166 ppc4xx: Maintenance patch for esd's CPCI405 derivats
-add pci_pre_init() for pci interrupt fixup code
-disable phy sleep mode via reset_phy() function
-use correct io accessors
-cleanup

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
2007-06-25 11:58:46 +02:00
Bartlomiej Sieka
addb2e1650 Re-factoring the legacy NAND code (legacy NAND now only in board-specific
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and
BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for
NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is
implemented for these boards.
2006-03-05 18:57:33 +01:00
Stefan Roese
2076d0a15f PMC405 and CPCI405: Moved configuration of pci resources into config file.
PMC405 and CPCI2DP: Added firmware download and booting via pci.

Patch by Matthias Fuchs, 20 Dec 2005
2006-01-18 20:03:15 +01:00
Wolfgang Denk
0c8721a466 Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
Wolfgang Denk
700a0c648d Add common (with Linux) MTD partition scheme and "mtdparts" command
Old, obsolete and duplicated code was cleaned up and replace by the
new partitioning method. There are two possible approaches now:
* define a single, static partition
* use mtdparts command line option and dynamic partitioning
Default is static partitioning.
2005-08-08 01:03:24 +02:00
stroese
a20b27a36b esd config files updated 2004-12-16 18:05:42 +00:00
wdenk
c837dcb1a3 * The PS/2 mux on the BMS2003 board needs 450 ms after power on
before we can access it; add delay in case we are faster (with no
  CF card inserted)

* Cleanup of some init functions

* Make sure SCC Ethernet is always stopped by the time we boot Linux
  to avoid Linux crashes by early packets coming in.

* Accelerate flash accesses on LWMON board by using buffered writes
2004-01-20 23:12:12 +00:00
stroese
2853d29b52 Update configuration. 2003-09-12 08:53:54 +00:00
stroese
fe389a82c9 - Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to CONFIG_BOOTP_MASK. 2003-08-28 14:17:32 +00:00
wdenk
8bde7f776c * Code cleanup:
- remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)
2003-06-27 21:31:46 +00:00
stroese
a0e135b493 - Add ping support. 2003-06-24 14:30:28 +00:00
stroese
53cf9435cc - CFG_RX_ETH_BUFFER added. 2003-06-05 15:39:44 +00:00
stroese
d4629c8c8d CPCI405AB (special version of esd CPCI405) board added. 2003-05-23 11:30:39 +00:00