Commit graph

9492 commits

Author SHA1 Message Date
Nick Thompson
d7e354374c TI: DaVinci: Updating EMAC driver for DM365, DM646x and DA8XX
The EMAC IP on DM365, DM646x and DA830 is slightly different
from that on DM644x. This change updates the DaVinci EMAC driver
so that EMAC becomes operational on SOCs with EMAC v2.

Signed-off-by: Nick Thompson <nick.thompson@ge.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-01-31 22:37:12 -08:00
Semih Hazar
0f751d6ef3 macb: Fix mii_phy_read and mii_phy_write functions
Enabling CONFIG_CMD_MII in AVR32 boards was not possible due to
compile errors.

This patch fixes miiphy_read and miiphy_write functions and
registers them properly.

Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-01-31 22:37:12 -08:00
Peter Tyser
5f6b144221 tsec: Add TSEC_FIBER flag
The TSEC_FIBER flag should be set when a PHY is operating with an
external fiber interface.  Currently it is only used to notify a user
that the PHY is operating in fiber mode.

A short description was also added to the other TSEC flag defines so
that it is clear how they differ from one another.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-01-31 22:34:34 -08:00
Peter Tyser
8abb8dcc8d tsec: Add support for using the BCM5482 PHY in fiber mode
The BCM5482 PHY supports both copper and fiber as an ethernet medium.
By enabling its copper/fiber mode auto-detection feature it can
dynamically determine if it should be configured for copper or fiber.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-01-31 22:34:34 -08:00
Peter Tyser
c6dbdfda53 tsec: General cleanup
- Cleanup formatting of phy_info structures

- Fix lines > 80 chars

- Fix some random indentation inconsistencies

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-01-31 22:34:34 -08:00
Peter Tyser
e1957ef02c tsec: Make functions/data static when possible
This is generally good practice and saves ~150 bytes.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-01-31 22:34:34 -08:00
Peter Tyser
27165b5c32 tsec: Clean up Broadcom PHY status parsing
- Remove unnecessary printing "Enet starting in <speed>/<duplex>"
    This same information is already printed during normal ethernet
    operation in the form "Speed: 1000, full duplex".

- Add a check for link before determining link speed and duplex
    If there is no link, speed/duplex don't matter.  This also removes
    the annoying and unneeded "Auto-neg error, defaulting to 10BT/HD"
    message that occurs when no link is detected.

- Whitespace and line > 80 characters cleanup

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-01-31 22:34:34 -08:00
Peter Tyser
46e91674fb tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode
In SGMII mode the link between a processor's internal TBI PHY and an
external PHY should always be 1000Mbps, full duplex.  Also, the SGMII
interface between an internal TBI PHY and external PHY does not
support in-band auto-negotation.

Previously, when configured for SGMII mode a TBI PHY would attempt to
restart auto-negotation during initializtion.  This auto-negotation
between a TBI PHY and external PHY would fail and result in unusable
ethernet operation.

Forcing the TBI PHY and and external PHY to link at 1000Mbps full duplex
in SGMII mode resolves this issue of auto-negotation failing.

Note that 10Mbps and 100Mbps operation is still possible on the external
side of the external PHY even when SGMII is operating at 1000Mbps.
The SGMII interface still operates at 1000Mbps, but each byte of data
is repeated 100 or 10 times for 10/100Mbps and the external PHY handles
converting this data stream into proper 10/100Mbps signalling.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-01-31 22:34:34 -08:00
Seunghyeon Rhee
76771e595a NET: Fix MAC addr handling for smc911x
This patch turns off MAC address mismatch warning when
optional eeprom programmed with MAC address is not available.
In that case, smc911x's MAC address register has its default
value ff:ff:ff:ff:ff:ff and it's not a valid address. This
makes eth_initialize() show the warning which has no
meaningful information while environment variable ethaddr
overrides the address read from the register. If there's no
eeprom and the value of MAC address register is not valid
after initialization, dev->enetaddr had better not be updated
and maintain its initial value 00:00:00:00:00:00, which I
think is what eth_initialize() expects. This is not a bug fix.
Even without this patch, the driver works fine. It's just for
enhancing the way of displaying messages.

Signed-off-by: Seunghyeon Rhee <seunghyeon@lpmtec.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-01-31 22:34:33 -08:00
Matthias Kaehlcke
07c966066b cs8900_initialize() cleanup
cs8900_initialize(): remove unecessary calls to free() and fix memory leak

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-01-31 22:34:33 -08:00
Mike Frysinger
c4168af3ba smc91111_eeprom: fix linking error
Building for a bf533-stamp ends up with this error:
smc91111_eeprom.o: In function `smc91111_eeprom':
examples/standalone/smc91111_eeprom.c:58: undefined reference to `memset'
make[2]: *** [smc91111_eeprom] Error 1

The new eth_struct definition means gcc has to zero out the structure on
the stack, and some gcc versions optimize this with an implicit call to
memset.  So tweak the structure style to avoid that gcc feature.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
2010-01-31 22:34:33 -08:00
Wolfgang Denk
9b208ece0a Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2010-01-27 20:19:08 +01:00
Kumar Gala
249d4dec69 Fix compiler warning in imximage.c due to getline prototype
imximage.c: In function 'imximage_parse_cfg_file':
imximage.c:142: warning: implicit declaration of function 'getline'

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-27 20:10:01 +01:00
Kumar Gala
a9c3ac78d8 85xx: Add support for 'cpu disable' command
Support disabling of a core via user command 'cpu disable'.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-26 23:17:50 -06:00
Kumar Gala
c894852b7a 86xx: Add support for 'cpu disable' command
Support disabling of a core via user command 'cpu disable'.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-26 23:17:50 -06:00
Kumar Gala
4194b3668a Add support to disable cpu's in multicore processors
Add a disable sub-command to the cpu command that allows for disabling
cores in multicore processors.  This can be useful for systems that are
using multicore chips but aren't utilizing all the cores as a way to
reduce power and possibly improve performance.

Also updated an added missing copyright.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-26 23:17:49 -06:00
Wolfgang Denk
797312a15e Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx 2010-01-26 22:32:38 +01:00
Wolfgang Denk
0a42c3a433 Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx 2010-01-26 22:29:51 +01:00
Heiko Schocher
8b1760ed9a 83xx, kmeter1: fix compile error
- delete double MTDIDS_DEFAULT and MTDPARTS_DEFAULT
  defines in board config file.
- add mising CONFIG_KM_UBI_PARTITION_NAME define

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
2010-01-26 13:50:34 -06:00
Wolfgang Wegner
5912d36507 add ability to handle compressed images to imxtract
imxtract currently can not handle compressed images. This patch adds
handling for bzip2 and zip compression. In both cases, a destination
address has to be specified for extraction.

Signed-off-by: Wolfgang Wegner <w.wegner@astro-kom.de>
2010-01-26 19:36:07 +01:00
Joakim Tjernlund
a16e9a5b5f ppc: remove -ffixed-r14 gcc option.
This is no loger needed, free up r14 for general usage.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2010-01-26 19:30:16 +01:00
Joakim Tjernlund
e6bee80814 ppc: Update README about the new GOT ptr.
r14 is no longer used as non volatile GOT ptr. Instead
the volatile r12 is used so be sure to do GET_GOT in
asm code when you need to access global data.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2010-01-26 19:30:15 +01:00
Joakim Tjernlund
0f8aa15917 ppc: Use r12 instead of r14 as GOT pointer.
r14 is not supposed to be clobbered by functions. Switch
to r12 and call GET_GOT when needed. This will allow u-boot
to loose the -ffixed-r14 gcc option.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2010-01-26 19:30:13 +01:00
Joakim Tjernlund
fc4e188789 ppc: Loose GOT access in IRQ
Using the GOT in IRQ handlers requires r14 to be -ffixed-r14.
Avoid this by relocatate transfer_to_handler too.
This will allow to free up r14 later on.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
2010-01-26 19:30:12 +01:00
Vivek Mahajan
66e821ebe9 85xx/p1_p2_rdb: enable hwconfig
Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-25 22:14:40 -06:00
Liu Yu
46df64f22c qe: fixup the snum for MPC8569 Rev2.0
Since 1.0 and 2.0 use different snum table,
we fixup the snum value according to SPRN_SVR.

Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-25 22:14:39 -06:00
Dave Liu
0fd2fa6cce Fix the local bus divider mapping
The real clock divider is 4 times of the bits LCRR[CLKDIV],
according the latest RevF RM.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-25 22:14:39 -06:00
Liu Yu
c95d541e4b ppc/85xx: Add ATM config for MPC8569MDS
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-25 22:14:35 -06:00
Liu Yu
d918038269 ppc/85xx: Add PIB/ATM support for MPC8569mds
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-25 22:13:26 -06:00
Li Yang
1118cdbfeb fsl_esdhc: fix wrong clock mask
Fix typo in SYSCTL_CLOCK_MASK, which caused residual in high bits of SDCLKFS.

Signed-off-by: Jin Qing <B24347@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-25 22:13:26 -06:00
Kumar Gala
693416fe01 Revert "ppc/p4080: Fix reporting of PME & FM clock frequencies"
This reverts commit bc20f9a952.

The original code was correct.  I clearly need glasses or a brown
paper bag.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-25 22:13:25 -06:00
James Yang
93cedc7164 ppc/p4080: Fix mask width of RCW fields MEM_PLL_RAT, SYS_PLL_RAT
The masks for MEM_PLL_RAT and SYS_PLL_RAT should have been 5-bits
instead of 4.

Signed-off-by: James Yang <James.Yang@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-01-25 22:13:25 -06:00
Mike Frysinger
2903ad33a7 jffs2: fix hangs/crashs when not using CONFIG_JFFS2_PART_SIZE
Commit b5b004ad8a caused the sector_size to
be calculated incorrectly when the part size was not hardcoded.  This is
because the new code relied on part->size but tried to do the calculation
before it was initialized properly, and it did not take into consideration
the magic SIZE_REMAINING define.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-26 00:07:50 +01:00
Mike Frysinger
64b1502133 getline: split out for darwin systems
At least on OS X 10.5 and older, getline does not exist.  So split out the
function from the mingw code so that we can pull it in for Darwin systems.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-26 00:07:13 +01:00
Mike Frysinger
e852d36a1e tools: give explicit libfdt paths
The current libfdt object rules hard depend implicitly on the .depend file
being correct.  If it isn't, then it is unable to properly compile the
objects.  Give it a full path like all the other implicit rules here so it
will always work in face of .depend issues.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-26 00:05:42 +01:00
Mike Frysinger
44431cabbb gzip/zlib: make features optional
If you really want to slim down U-Boot and you would rather use a higher
compression scheme (like LZMA), it'd be nice to disable gzip/zlib since
these code bases take up a significant amount of space.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-26 00:04:57 +01:00
Stefano Babic
8edcde5e4e mkimage: Add Freescale imx Boot Image support (imximage)
This patch adds support for "imximage" (MX Boot Image)
to the mkimage utility. The imximage is used on the Freescales's
MX.25, MX.35 and MX.51 processors.

Further details under doc/README.imximage.

This patch was tested on a Freescale mx51evk board.

Signed-off-by: Stefano Babic <sbabic@denx.de>
2010-01-25 23:58:29 +01:00
Detlev Zundel
a21fb981d5 mpc5xxx: Support CPU internal watchdog.
Signed-off-by: Detlev Zundel <dzu@denx.de>
2010-01-25 23:57:39 +01:00
Detlev Zundel
82826d5422 mpc512x: Add display of reset status register
Content of the RSR is put into gd early so we can output it together
with the CPU info.  The clearing of gd in board_init_f is redundant for
this architecture as it is done in cpu_init_f so we remove it.

Signed-off-by: Detlev Zundel <dzu@denx.de>
2010-01-24 15:29:29 +01:00
Wolfgang Denk
a84b655fab Merge branch 'master-sync' of git://git.denx.de/u-boot-arm 2010-01-23 17:42:03 +01:00
Daniel Gorsulowski
a3f3897bfd at91: Enable slow master clock on meesc board
Normally the processor clock has a divisor of 2.
In some cases this this needs to be set to 4.
Check the user has set environment mdiv to 4 to change the divisor.

Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
2010-01-23 08:15:50 -06:00
Vipin KUMAR
7da6923604 SPEAr : Support added for SPEAr320 board
SPEAr320 SoC support contains basic spear320 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver
- emi driver(cfi support)

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:50 -06:00
Vipin KUMAR
080cfee714 SPEAr : Support added for SPEAr310 board
SPEAr310 SoC support contains basic spear310 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver
- emi driver(cfi support)

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:50 -06:00
Vipin KUMAR
4bfacad4e7 SPEAr : emi controller initialization for CFI driver support
SPEAr310 and SPEAr320 SoCs contain an EMI controller to interface
Paraller NOR flashes. This patch adds the support for this IP

The standard CFI driver is used to interface with NOR flashes

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:50 -06:00
Vipin KUMAR
7e074158ce SPEAr : Support added for SPEAr300 board
SPEAr300 SoC support contains basic spear300 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:50 -06:00
Vipin KUMAR
f92994f0f7 SPEAr : Support for HW mac id read/write from i2c mem
This patch adds the  support to read and write mac id from i2c
memory.
For reading:
	if (env contains ethaddr)
		pick env ethaddr
	else
		pick ethaddr from i2c memory
For writing:
	chip_config ethaddr XX:XX:XX:XX:XX:XX writes the mac id
	in i2c memory

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:49 -06:00
Vipin KUMAR
566c9c16fe SPEAr : Support added for SPEAr600 board
SPEAr600 SoC support contains basic spear600 support along with the
usage of following drivers
- serial driver(UART)
- i2c driver
- smi driver
- nand driver(FSMC)
- usbd driver

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:49 -06:00
Vipin KUMAR
62db1c0d79 SPEAr : usbd driver support for SPEAr SoCs
SPEAr SoCs contain a synopsys usb device controller.
USB Device IP can work in 2 modes
- DMA mode
- Slave mode

The driver adds support only for slave mode operation of usb
device IP. This driver is used along with standard USBTTY
driver to obtain a tty interface over USB on the host

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:49 -06:00
Vipin KUMAR
165fa406ad SPEAr : nand driver support for SPEAr SoCs
SPEAr SoCs contain an FSMC controller which can be used to interface
with a range of memories eg. NAND, SRAM, NOR.
Currently, this driver supports interfacing FSMC with NAND memories

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:49 -06:00
Vipin KUMAR
a6e34f76c5 SPEAr : smi driver support for SPEAr SoCs
SPEAr SoCs contain a serial memory interface controller. This
controller is used to interface with spi based memories.
This patch adds the driver for this IP.

Signed-off-by: Vipin <vipin.kumar@st.com>
2010-01-23 08:15:49 -06:00