sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity
4,141 Commits 9 Branches 8 Tags 113 MiB
Commit Graph

4141 Commits

Author SHA1 Message Date
Becky Bruce ddcebcb638 86xx: Add print_laws function to fsl_law.c 
This can be used for debug, and will be used by board code
to help implement reginfo.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
 2008-01-24 12:12:51 -06:00
Becky Bruce 9cd32426f2 86xx: Remove old-style law setup code 
This includes mpc8610hpcd, mpc8641hpcn, and sbc8641d.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
 2008-01-24 12:12:40 -06:00
Becky Bruce 713d818664 86xx: Convert sbc8641d to use new law setup code. 
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
 2008-01-24 12:12:36 -06:00
Becky Bruce 031976f636 86xx: Convert mpc8610hpcd to new law setup method. 
Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
 2008-01-24 12:12:33 -06:00
Becky Bruce 4933b91f8a 86xx: Support new law setup method and convert mpc8641 
Adds the support code in cpu/mpc86xx for the new law setup code
recently created fsl_law.c, and changes the MPC8641HPCN config
to use this code.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
 2008-01-24 12:12:30 -06:00
Becky Bruce 1a41f7ce9c 86xx: Rearrange the sequence in start.S 
* split the BAT initialization so that only 2 BATs (for the boot page
and stack) are programmed very early on.  The rest are initialized later.
* Move other BAT setup,  ccsrbar setup, and law setup later in the code
after translation has been enabled.

These changes will facilitate the moving of law and BAT initialization
to C code, and will aid with 36-bit physical addressing support.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
 2008-01-24 12:11:37 -06:00
Wolfgang Denk 33dac03b1b Coding Style Cleanup; update CHANGELOG 
Signed-off-by: Wolfgang Denk <wd@denx.de>
 2008-01-23 14:41:37 +01:00
Wolfgang Denk 060193e4c3 Merge ../custodians 2008-01-23 14:40:34 +01:00
Wolfgang Denk 40dcd6aa75 Merge branch 'master' of git://www.denx.de/git/u-boot-ixp 2008-01-23 14:39:26 +01:00
Wolfgang Denk f10d7b9454 Merge ../custodians 2008-01-23 14:37:59 +01:00
Wolfgang Denk f58934551e Merge branch 'master' of git://www.denx.de/git/u-boot-mips 2008-01-23 14:37:52 +01:00
Wolfgang Denk b0e49b4cd8 Merge ../custodians 2008-01-23 14:35:32 +01:00
Wolfgang Denk 351080e2e8 Merge branch 'master' of git://www.denx.de/git/u-boot-sh 2008-01-23 14:35:26 +01:00
Wolfgang Denk a6dff77c2d Merge ../custodians 2008-01-23 14:34:00 +01:00
Wolfgang Denk 8d54477b9b Merge branch 'master' of git://www.denx.de/git/u-boot-avr32 2008-01-23 14:33:40 +01:00
Wolfgang Denk 865f0f9754 Coding Style Cleanup; update CHANGELOG 
Signed-off-by: Wolfgang Denk <wd@denx.de>
 2008-01-23 14:31:17 +01:00
Wolfgang Denk e57ed96bac Merge branch 'master' of git://www.denx.de/git/u-boot-coldfire 2008-01-23 14:23:13 +01:00
Wolfgang Denk 2468592d79 Merge branch 'master' of git://www.denx.de/git/u-boot-net 2008-01-23 14:20:49 +01:00
Wolfgang Denk 8f00731818 Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xx 2008-01-23 14:19:45 +01:00
Wolfgang Denk ed3afca32e Merge branch 'master' of git://www.denx.de/git/u-boot-mpc86xx 2008-01-23 14:18:18 +01:00
Wolfgang Denk 39166b5c9e Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xx 2008-01-23 13:56:55 +01:00
Dave Liu cfe5ca7797 mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h 
The commit 04a9e1180a
cause the 83xx immap broken, so the DMA and PCI will
be failed.

The patch fix the struct spi8xxx and rm struct spi83xx.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
 2008-01-18 12:39:23 -06:00
Shinya Kuribayashi 922ff465cc Merge branch 'master' of git://www.denx.de/git/u-boot 2008-01-18 22:48:06 +09:00
Haavard Skinnemoen 6b44394442 AVR32: ATNGW100 board support 
Add support for the ATNGW100 Network Gateway reference design,
including flash, ethernet and MMC support.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
 2008-01-18 09:53:18 +01:00
Haavard Skinnemoen e006927a0b AVR32: Initialize ipaddr, loadaddr and bootfile at startup 
I don't know why the relevant layers can't do this by itself, but this
is what ppc does.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
 2008-01-18 09:53:18 +01:00
Michael Schwingen 799891ef7b Add AcTux board support 
Hi,

The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
files that
contain changes for multiple boards, the board-specific files follow as
separate patches.

Signed-off-by: Michael Schwingen <michael@schwingen.org>
 2008-01-18 01:05:22 +01:00
Michael Schwingen 66a4344a4d add AcTux-4 board support 
Signed-off-by: Michael Schwingen <michael@schwingen.org>
 2008-01-18 01:00:03 +01:00
Michael Schwingen bc24345e41 add AcTux-3 board support 
Signed-off-by: Michael Schwingen <michael@schwingen.org>
 2008-01-18 01:00:02 +01:00
Michael Schwingen aebf00fc4d add AcTux-2 board support 
Signed-off-by: Michael Schwingen <michael@schwingen.org>
 2008-01-18 01:00:02 +01:00
Michael Schwingen ea99e8f05b add AcTux-1 board support 
Signed-off-by: Michael Schwingen <michael@schwingen.org>
 2008-01-18 01:00:02 +01:00
Jean-Christophe PLAGNIOL-VILLARD 3d9f3bfb7a ARM: remove useless function board_post_init 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 2008-01-18 01:00:02 +01:00
Michael Schwingen 96bd462942 IXP: enable RTS 
enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
No handshaking is done, but the active RTS signal allows to
connect to the target using a PC which is using RTS/CTS
handshake, and does no harm if the PC is set to ignore RTS.

Signed-off-by: Michael Schwingen <michael@schwingen.org>
 2008-01-18 01:00:02 +01:00
Jean-Christophe PLAGNIOL-VILLARD a1cf027a08 IXP: add dynamic microcode addr 
allow to load the microde from flash or ram by download it through
the serial or other.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Stefan Roese <sr@denx.de>
 2008-01-18 01:00:02 +01:00
Michael Schwingen 63ebcc4615 load ixp42x NPE firmware from separate flash block, remove dead code 
Hi,

the following patch adds support to move the IXP42X NPE firmware to a
separate flash block, whose start address is defined in
CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
NPE-enabled u-boot without copyright problems due to the NPE firmware.

I hope the patch applies, I get whitespace-related differences in the NPE
files due to trailing whitespace in the original versions.

Signed-off-by: Michael Schwingen <michael@schwingen.org>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 2008-01-18 00:59:38 +01:00
Andy Fleming 6ea66a818d Merge branch 'kumar' 2008-01-17 15:52:38 -06:00
TsiChungLiew 57a127201e ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support 
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
 2008-01-17 14:59:43 -06:00
TsiChungLiew 1aee111135 ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board 
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
 2008-01-17 14:59:42 -06:00
TsiChungLiew 777d1abd97 ColdFire: Add MCF547x_8x FEC driver 
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off by: John Rigby <jrigby@freescale.com>
 2008-01-17 14:59:42 -06:00
TsiChungLiew 72f56adc0b ColdFire: Add MCF547x_8x dma code and header files 
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
 2008-01-17 14:59:42 -06:00
TsiChungLiew ce09fc49b5 ColdFire: Add MCF547x_8x dma code - 2 
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
 2008-01-17 14:59:42 -06:00
TsiChungLiew 11865ea844 ColdFire: Add MCF547x_8x dma code - 1 
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
 2008-01-17 14:59:42 -06:00
TsiChungLiew 4621fc3fe7 ColdFire: Add MCF547x_8x related header files 
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off by: John Rigby <jrigby@freescale.com>
 2008-01-17 14:59:41 -06:00
TsiChungLiew 570c0186ae ColdFire: Add MCF547x_8x cpu arch 
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
 2008-01-17 14:59:41 -06:00
TsiChungLiew e2756f4b54 ColdFire: Add MCF5227x cpu and M52277EVB support-3 
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
 2008-01-17 14:59:41 -06:00
TsiChungLiew c875810279 ColdFire: Add MCF5227x cpu and MCF52277EVB support-2 
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
 2008-01-17 14:59:41 -06:00
TsiChungLiew 1552af70ec ColdFire: Add MCF5227x cpu and M52277EVB support-1 
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
 2008-01-17 14:59:41 -06:00
TsiChungLiew 397b7b81a1 ColdFire: Fix CFI Flash low level Read/Write macro 
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
 2008-01-17 14:59:40 -06:00
TsiChungLiew aa5f1f9dc8 ColdFire: Add M5373EVB platform support - 2 
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
 2008-01-17 14:59:40 -06:00
TsiChungLiew 1ac559d4aa ColdFire: Add M5373EVB platform support - 1 
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
 2008-01-17 14:59:40 -06:00
TsiChungLiew 320d61991f ColdFire: Update FlexBus CS for MCF532x 
Definition update and change from 16bit to 32bit

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
 2008-01-17 14:59:40 -06:00