sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity
u-boot/drivers/net
History
Liu Gang 292dc6c501 powerpc/corenet_ds: Slave module for boot from SRIO 
For the powerpc processors with SRIO interface, boot location can be configured
from SRIO1 or SRIO2 by RCW. The processor booting from SRIO can do without flash
for u-boot image. The image can be fetched from another processor's memory
space by SRIO link connected between them.

The processor boots from SRIO is slave, the processor boots from normal flash
memory space and can help slave to boot from its memory space is master.
They are different environments and requirements:

master:
	1. NOR flash for its own u-boot image, ucode and ENV space.
	2. Slave's u-boot image in master NOR flash.
	3. Normally boot from local NOR flash.
	4. Configure SRIO switch system if needed.
slave:
	1. Just has EEPROM for RCW. No flash for u-boot image, ucode and ENV.
	2. Boot location should be set to SRIO1 or SRIO2 by RCW.
	3. RCW should configure the SerDes, SRIO interfaces correctly.
	4. Slave must be powered on after master's boot.
	5. Must define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE because of no ucode
	   locally.

For the slave module, need to finish these processes:
	1. Set the boot location to SRIO1 or SRIO2 by RCW.
    2. Set a specific TLB entry for the boot process.
	3. Set a LAW entry with the TargetID SRIO1 or SRIO2 for the boot.
	4. Slave's u-boot image should be generated specifically by
	   make xxxx_SRIOBOOT_SLAVE_config.
	   This will set SYS_TEXT_BASE=0xFFF80000 and other configurations.

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
 		2012-04-24 23:58:33 -05:00
..
fm powerpc/corenet_ds: Slave module for boot from SRIO 2012-04-24 23:58:33 -05:00
phy net: phy: make board_phy_config responsible for calling drv->config 2012-02-27 21:19:25 +01:00
4xx_enet.c 4xx_enet.c: Fix GCC 4.6 build warnings 2011-11-16 21:14:14 +01:00
8390.h drivers/net : move net drivers to drivers/net 2007-11-25 18:35:17 +01:00
Makefile net: ll_temac: Add LL TEMAC driver to u-boot 2012-04-04 09:36:19 -05:00
altera_tse.c net/altera_tse: use flush_dcache_range instead of flush_dcache 2012-03-30 23:58:36 +02:00
altera_tse.h miiphy: convert to linux/mii.h 2011-01-09 18:06:50 +01:00
armada100_fec.c net/miiphy/serial: drop duplicate "NAMESIZE" define 2012-03-18 20:11:22 +01:00
armada100_fec.h net: Adds Fast Ethernet Controller driver for Armada100 2011-09-30 22:00:53 +02:00
at91_emac.c drivers/net/at91_emac.c: Fix GCC 4.6 build warnings 2011-12-10 23:08:02 +01:00
ax88180.c AX88180: add support for the Marvell 88E1118 phy 2010-07-12 00:14:29 -07:00
ax88180.h AX88180: use standard I/O accessors 2010-07-12 00:14:29 -07:00
ax88796.c net: ne2000: Divided a function of NE2000 driver 2008-10-13 22:28:32 -07:00
ax88796.h NE2000: Fix regresssion introduced by e710185aae on non AX88796 2008-04-28 22:26:36 -07:00
bfin_mac.c Blackfin: bfin_mac: convert from old style MMR macros 2010-10-02 16:00:37 -04:00
bfin_mac.h Blackfin: bfin_mac: hook up new write_hwaddr function 2010-05-03 14:52:50 -07:00
calxedaxgmac.c net: calxedaxgmac: fix build due to missing __aligned definition 2012-03-28 23:30:33 +02:00
cs8900.c drivers/net/cs8900.c: Fix GCC 4.6 warning 2011-11-23 08:14:27 +01:00
cs8900.h Convert CS8900 Ethernet driver to CONFIG_NET_MULTI API 2009-08-25 13:35:54 -07:00
davinci_emac.c ARM: davici_emac: Fix condition for number of phy detects 2011-12-06 23:59:37 +01:00
davinci_emac.h davinci_emac: fix for running with dcache enabled 2011-12-06 23:59:35 +01:00
dc2114x.c net: dc2114x: check for apropriate command 2011-10-22 00:37:49 +02:00
designware.c net/designware: Change timeout loop implementation 2012-04-04 10:47:53 -05:00
designware.h net/designware: Try configuring phy on each dw_eth_init 2012-04-04 10:47:21 -05:00
dm9000x.c DM9000:Add a byte swap macro for dm9000 io operation. 2011-10-17 22:25:33 +02:00
dm9000x.h dm9000 remove dead external phy support, gpio fix 2008-08-26 23:08:19 -07:00
dnet.c drivers/net/dnet.c: Fix GCC 4.6 warnings 2011-11-23 08:33:57 +01:00
dnet.h dnet: driver for Dave DNET ethernet controller 2009-02-10 00:16:27 +01:00
e1000.c drivers/net/e1000.c: Fix GCC 4.6 build warnings 2011-12-20 23:21:03 +01:00
e1000.h e1000: remove duplicate macros in e1000.h 2011-11-17 10:00:10 +01:00
e1000_spi.c drivers/net/e1000_spi.c: Fix build warnings 2011-12-20 23:13:49 +01:00
eepro100.c drivers/net/eepro100.c: fix GCC 4.6 build warnings 2011-11-03 20:39:35 +01:00
enc28j60.c drivers/net/enc28j60.c: Fix GCC 4.6 warnings 2011-11-16 21:29:23 +01:00
enc28j60.h NET: add ENC28J60 driver using SPI framework 2010-10-11 22:47:48 -07:00
ep93xx_eth.c miiphy: constify device name 2010-08-09 11:52:29 -07:00
ep93xx_eth.h Add EP93xx ethernet driver 2010-01-31 22:37:12 -08:00
ethoc.c net/ethoc: use flush_dcache_range instead of flush_dcache 2012-03-30 23:58:09 +02:00
fec_mxc.c net: fec_mxc: allow use with cache enabled 2012-03-29 07:57:20 +02:00
fec_mxc.h net: fec_mxc: allow use with cache enabled 2012-03-29 07:57:20 +02:00
fsl_mcdmafec.c miiphy: convert to linux/mii.h 2011-01-09 18:06:50 +01:00
fsl_mdio.c tsec: Convert tsec to use PHY Lib 2011-04-20 15:09:34 -05:00
ftgmac100.c consolidate mdelay by providing a common function for all users 2011-10-22 01:16:08 +02:00
ftgmac100.h ftgmac100: support of gigabit eth ftgmac100 2011-01-09 22:16:51 +01:00
ftmac100.c net: ftmac100: update get_timer() usages 2011-03-21 22:54:23 +01:00
ftmac100.h arm: A320: driver for FTMAC100 ethernet controller 2009-08-10 14:53:52 -07:00
greth.c cleanup: Fix typos and misspellings in various files. 2011-07-28 21:27:36 +02:00
greth.h SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver. 2008-03-30 00:33:28 -04:00
inca-ip_sw.c drivers/net/inca-ip_sw.c: Fix GCC 4.6 build warning 2011-12-08 21:01:19 +01:00
ks8695eth.c GCC4.6: Squash warnings in ks8695eth.c 2011-10-27 23:54:07 +02:00
lan91c96.c drivers/net/lan91c96.c: Fix GCC 4.6 warning 2011-11-23 08:14:27 +01:00
lan91c96.h PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X 2011-12-06 23:59:32 +01:00
macb.c macb: fix compile warning 2011-06-21 22:26:22 +02:00
macb.h AT91CAP9 support : MACB changes 2008-02-14 09:37:58 +00:00
mcffec.c miiphy: convert to linux/mii.h 2011-01-09 18:06:50 +01:00
mcfmii.c net: drop !NET_MULTI code 2011-10-05 22:22:16 +02:00
mpc5xxx_fec.c mpc5xxx_fec: add call to reset_phy() after PHY initialization 2010-10-11 23:00:29 -07:00
mpc5xxx_fec.h Move MPC5xxx_FEC driver to drivers/net 2008-08-29 13:58:07 -06:00
mpc512x_fec.c net: drop !NET_MULTI code 2011-10-05 22:22:16 +02:00
mpc512x_fec.h MPC512x: remove include/mpc512x.h 2009-06-12 20:47:16 +02:00
mvgbe.c mvgbe: remove warning for unused methods 2012-04-03 11:17:52 -05:00
mvgbe.h mvgbe: enable configurability of PORT_SERIAL_CONTROL_VALUE 2011-05-31 19:46:14 +02:00
natsemi.c cleanup: Fix typos and misspellings in various files. 2011-07-28 21:27:36 +02:00
ne2000.c consolidate mdelay by providing a common function for all users 2011-10-22 01:16:08 +02:00
ne2000.h NE2000: Fix regresssion introduced by e710185aae on non AX88796 2008-04-28 22:26:36 -07:00
ne2000_base.c drivers/net/ne2000_base.c: Fix GCC 4.6 build warnings 2011-12-10 23:05:42 +01:00
ne2000_base.h net: ne2000: Divided a function of NE2000 driver 2008-10-13 22:28:32 -07:00
netarm_eth.c Timer: Fix misuse of ARM *timer_masked() functions outside arch/arm 2011-07-16 11:55:00 +02:00
netarm_eth.h drivers/net : move net drivers to drivers/net 2007-11-25 18:35:17 +01:00
netconsole.c netconsole: support packets longer than 512 bytes 2011-10-09 23:24:48 +02:00
nicext.h Big white-space cleanup. 2008-05-21 00:14:08 +02:00
ns8382x.c drivers/net/ns8382x.c: fix GCC 4.6 build warnings 2011-11-03 20:38:49 +01:00
pcnet.c drivers/net/pcnet.c: Change debug code to fix build warning 2011-11-07 22:18:06 +01:00
plb2800_eth.c Moved initialization of plb2800 Ethernet driver to board_eth_init 2008-09-02 21:18:18 -07:00
rtl8139.c drivers/net/rtl8139.c: Fix GCC 4.6 build warnings 2011-11-07 22:47:37 +01:00
rtl8169.c drivers/net/rtl8169.c: Fix GCC 4.6 build warning 2011-11-07 22:18:17 +01:00
sh_eth.c net: sh_eth: Remove unnecessary return 2012-03-08 10:26:18 +09:00
sh_eth.h sh: sh_eth: Add support SH7724 2012-03-08 10:25:49 +09:00
smc911x.c consolidate mdelay by providing a common function for all users 2011-10-22 01:16:08 +02:00
smc911x.h Improve Power Management in SMC911X driver. 2011-11-22 08:39:27 +01:00
smc91111.c net: smc91111: use mdelay() 2012-03-27 14:44:12 +02:00
smc91111.h PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X 2011-12-06 23:59:32 +01:00
tsec.c powerpc/mpc8548: Add workaround for erratum NMG_eTSEC129 2011-11-08 08:30:32 -06:00
tsi108_eth.c net: tsi108_eth: Add initialized eth_device structure 2010-11-14 23:17:46 +01:00
uli526x.c Remove instances of phy_read/write 2011-04-20 13:44:46 -05:00
vsc7385.c rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
xilinx_axi_emac.c net: axi_ethernet: Add driver to u-boot 2011-10-15 22:12:05 +02:00
xilinx_emaclite.c net: emaclite: Move RX/TX ping pong initialization to 2011-10-23 23:32:44 +02:00
xilinx_ll_temac.c net: ll_temac: drop obsolete "NAMESIZE" define 2012-04-21 17:28:03 +02:00
xilinx_ll_temac.h net: ll_temac: Add LL TEMAC driver to u-boot 2012-04-04 09:36:19 -05:00
xilinx_ll_temac_fifo.c net: ll_temac: Add LL TEMAC driver to u-boot 2012-04-04 09:36:19 -05:00
xilinx_ll_temac_fifo.h net: ll_temac: Add LL TEMAC driver to u-boot 2012-04-04 09:36:19 -05:00
xilinx_ll_temac_mdio.c net: ll_temac: Add LL TEMAC driver to u-boot 2012-04-04 09:36:19 -05:00
xilinx_ll_temac_mdio.h net: ll_temac: Add LL TEMAC driver to u-boot 2012-04-04 09:36:19 -05:00
xilinx_ll_temac_sdma.c net: ll_temac: Add LL TEMAC driver to u-boot 2012-04-04 09:36:19 -05:00
xilinx_ll_temac_sdma.h net: ll_temac: Add LL TEMAC driver to u-boot 2012-04-04 09:36:19 -05:00