u-boot/board/freescale/t2080qds
Shengzhou Liu 3fdc827ca8 t2080qds/ddr: update ddr parameters
- Optimize UDIMM parameters for whole range from 1500MT/s to 2140MT/s.
- Remove unused patameters: 'cpo', 'wrdata delay', '2T', which are
  unrelated to DDR3/3L.

Tested with UDIMM 9JSF25672AZ-2G1K1 and verified speed 1200/1866/2133MT/s.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-01-21 14:02:21 -08:00
..
ddr.c t2080qds/ddr: update ddr parameters 2014-01-21 14:02:21 -08:00
ddr.h t2080qds/ddr: update ddr parameters 2014-01-21 14:02:21 -08:00
eth_t2080qds.c powerpc/t2080qds: some update for t2080qds 2014-01-21 13:37:41 -08:00
law.c powerpc/t2080qds: add support for t2080qds board 2013-11-25 12:36:11 -08:00
Makefile powerpc/t2080qds: add support for t2080qds board 2013-11-25 12:36:11 -08:00
pci.c powerpc/t2080qds: add support for t2080qds board 2013-11-25 12:36:11 -08:00
t2080_pbi.cfg t2080qds/ramboot: enable PBL tool for t2080qds 2013-11-25 12:36:55 -08:00
t2080_rcw.cfg t2080qds/ramboot: enable PBL tool for t2080qds 2013-11-25 12:36:55 -08:00
t2080qds.c powerpc/t2080qds: some update for t2080qds 2014-01-21 13:37:41 -08:00
t2080qds.h powerpc/t2080qds: add support for t2080qds board 2013-11-25 12:36:11 -08:00
t2080qds_qixis.h powerpc/t2080qds: add support for t2080qds board 2013-11-25 12:36:11 -08:00
tlb.c powerpc/t2080qds: add support for t2080qds board 2013-11-25 12:36:11 -08:00