- add more serdes protocols support. - fix some serdes lanes route. - fix SGMII doesn't work and incorrect mdio display for XFI when serdes 0x6d. - correct boot location info for SD/SPI boot. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
518 lines
13 KiB
C
518 lines
13 KiB
C
/*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* Shengzhou Liu <Shengzhou.Liu@freescale.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <netdev.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_law.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <asm/fsl_portals.h>
|
|
#include <asm/fsl_liodn.h>
|
|
#include <malloc.h>
|
|
#include <fm_eth.h>
|
|
#include <fsl_mdio.h>
|
|
#include <miiphy.h>
|
|
#include <phy.h>
|
|
#include <asm/fsl_dtsec.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include "../common/qixis.h"
|
|
#include "../common/fman.h"
|
|
#include "t2080qds_qixis.h"
|
|
|
|
#define EMI_NONE 0xFFFFFFFF
|
|
#define EMI1_RGMII1 0
|
|
#define EMI1_RGMII2 1
|
|
#define EMI1_SLOT1 2
|
|
#define EMI1_SLOT2 6
|
|
#define EMI1_SLOT3 3
|
|
#define EMI1_SLOT4 4
|
|
#define EMI1_SLOT5 5
|
|
#define EMI2 7
|
|
|
|
static int mdio_mux[NUM_FM_PORTS];
|
|
|
|
static const char * const mdio_names[] = {
|
|
"T2080QDS_MDIO_RGMII1",
|
|
"T2080QDS_MDIO_RGMII2",
|
|
"T2080QDS_MDIO_SLOT1",
|
|
"T2080QDS_MDIO_SLOT3",
|
|
"T2080QDS_MDIO_SLOT4",
|
|
"T2080QDS_MDIO_SLOT5",
|
|
"T2080QDS_MDIO_SLOT2",
|
|
"T2080QDS_MDIO_10GC",
|
|
};
|
|
|
|
/* Map SerDes1 8 lanes to default slot, will be initialized dynamically */
|
|
static u8 lane_to_slot[] = {3, 3, 3, 3, 1, 1, 1, 1};
|
|
|
|
static const char *T2080qds_mdio_name_for_muxval(u8 muxval)
|
|
{
|
|
return mdio_names[muxval];
|
|
}
|
|
|
|
struct mii_dev *mii_dev_for_muxval(u8 muxval)
|
|
{
|
|
struct mii_dev *bus;
|
|
const char *name = T2080qds_mdio_name_for_muxval(muxval);
|
|
|
|
if (!name) {
|
|
printf("No bus for muxval %x\n", muxval);
|
|
return NULL;
|
|
}
|
|
|
|
bus = miiphy_get_dev_by_name(name);
|
|
|
|
if (!bus) {
|
|
printf("No bus by name %s\n", name);
|
|
return NULL;
|
|
}
|
|
|
|
return bus;
|
|
}
|
|
|
|
struct T2080qds_mdio {
|
|
u8 muxval;
|
|
struct mii_dev *realbus;
|
|
};
|
|
|
|
static void T2080qds_mux_mdio(u8 muxval)
|
|
{
|
|
u8 brdcfg4;
|
|
if (muxval < 7) {
|
|
brdcfg4 = QIXIS_READ(brdcfg[4]);
|
|
brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
|
|
brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
|
|
QIXIS_WRITE(brdcfg[4], brdcfg4);
|
|
}
|
|
}
|
|
|
|
static int T2080qds_mdio_read(struct mii_dev *bus, int addr, int devad,
|
|
int regnum)
|
|
{
|
|
struct T2080qds_mdio *priv = bus->priv;
|
|
|
|
T2080qds_mux_mdio(priv->muxval);
|
|
|
|
return priv->realbus->read(priv->realbus, addr, devad, regnum);
|
|
}
|
|
|
|
static int T2080qds_mdio_write(struct mii_dev *bus, int addr, int devad,
|
|
int regnum, u16 value)
|
|
{
|
|
struct T2080qds_mdio *priv = bus->priv;
|
|
|
|
T2080qds_mux_mdio(priv->muxval);
|
|
|
|
return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
|
|
}
|
|
|
|
static int T2080qds_mdio_reset(struct mii_dev *bus)
|
|
{
|
|
struct T2080qds_mdio *priv = bus->priv;
|
|
|
|
return priv->realbus->reset(priv->realbus);
|
|
}
|
|
|
|
static int T2080qds_mdio_init(char *realbusname, u8 muxval)
|
|
{
|
|
struct T2080qds_mdio *pmdio;
|
|
struct mii_dev *bus = mdio_alloc();
|
|
|
|
if (!bus) {
|
|
printf("Failed to allocate T2080QDS MDIO bus\n");
|
|
return -1;
|
|
}
|
|
|
|
pmdio = malloc(sizeof(*pmdio));
|
|
if (!pmdio) {
|
|
printf("Failed to allocate T2080QDS private data\n");
|
|
free(bus);
|
|
return -1;
|
|
}
|
|
|
|
bus->read = T2080qds_mdio_read;
|
|
bus->write = T2080qds_mdio_write;
|
|
bus->reset = T2080qds_mdio_reset;
|
|
sprintf(bus->name, T2080qds_mdio_name_for_muxval(muxval));
|
|
|
|
pmdio->realbus = miiphy_get_dev_by_name(realbusname);
|
|
|
|
if (!pmdio->realbus) {
|
|
printf("No bus with name %s\n", realbusname);
|
|
free(bus);
|
|
free(pmdio);
|
|
return -1;
|
|
}
|
|
|
|
pmdio->muxval = muxval;
|
|
bus->priv = pmdio;
|
|
|
|
return mdio_register(bus);
|
|
}
|
|
|
|
void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
|
|
enum fm_port port, int offset)
|
|
{
|
|
int phy;
|
|
char alias[20];
|
|
struct fixed_link f_link;
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 srds_s1 = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
|
|
|
|
srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
|
|
|
|
if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
|
|
phy = fm_info_get_phy_address(port);
|
|
switch (port) {
|
|
case FM1_DTSEC1:
|
|
case FM1_DTSEC2:
|
|
case FM1_DTSEC9:
|
|
case FM1_DTSEC10:
|
|
sprintf(alias, "phy_sgmii_s3_%x", phy);
|
|
fdt_set_phy_handle(fdt, compat, addr, alias);
|
|
fdt_status_okay_by_alias(fdt, "emi1_slot3");
|
|
break;
|
|
case FM1_DTSEC5:
|
|
case FM1_DTSEC6:
|
|
if (mdio_mux[port] == EMI1_SLOT1) {
|
|
sprintf(alias, "phy_sgmii_s1_%x", phy);
|
|
fdt_set_phy_handle(fdt, compat, addr, alias);
|
|
fdt_status_okay_by_alias(fdt, "emi1_slot1");
|
|
} else if (mdio_mux[port] == EMI1_SLOT2) {
|
|
sprintf(alias, "phy_sgmii_s2_%x", phy);
|
|
fdt_set_phy_handle(fdt, compat, addr, alias);
|
|
fdt_status_okay_by_alias(fdt, "emi1_slot2");
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
} else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII) {
|
|
switch (srds_s1) {
|
|
case 0x66: /* XFI interface */
|
|
case 0x6b:
|
|
case 0x6c:
|
|
case 0x6d:
|
|
case 0x71:
|
|
f_link.phy_id = port;
|
|
f_link.duplex = 1;
|
|
f_link.link_speed = 10000;
|
|
f_link.pause = 0;
|
|
f_link.asym_pause = 0;
|
|
/* no PHY for XFI */
|
|
fdt_delprop(fdt, offset, "phy-handle");
|
|
fdt_setprop(fdt, offset, "fixed-link", &f_link,
|
|
sizeof(f_link));
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
void fdt_fixup_board_enet(void *fdt)
|
|
{
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* This function reads RCW to check if Serdes1{E,F,G,H} is configured
|
|
* as slot 1/2/3 and update the lane_to_slot[] array accordingly
|
|
*/
|
|
static void initialize_lane_to_slot(void)
|
|
{
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 srds_s1 = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
|
|
|
|
srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
|
|
|
|
switch (srds_s1) {
|
|
case 0x51:
|
|
case 0x5f:
|
|
case 0x65:
|
|
case 0x6b:
|
|
case 0x71:
|
|
lane_to_slot[5] = 2;
|
|
lane_to_slot[6] = 2;
|
|
lane_to_slot[7] = 2;
|
|
break;
|
|
case 0xa6:
|
|
case 0x8e:
|
|
case 0x8f:
|
|
case 0x82:
|
|
case 0x83:
|
|
case 0xd3:
|
|
case 0xd9:
|
|
case 0xcb:
|
|
lane_to_slot[6] = 2;
|
|
lane_to_slot[7] = 2;
|
|
break;
|
|
case 0xda:
|
|
lane_to_slot[4] = 3;
|
|
lane_to_slot[5] = 3;
|
|
lane_to_slot[6] = 3;
|
|
lane_to_slot[7] = 3;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
#if defined(CONFIG_FMAN_ENET)
|
|
int i, idx, lane, slot, interface;
|
|
struct memac_mdio_info dtsec_mdio_info;
|
|
struct memac_mdio_info tgec_mdio_info;
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
|
|
u32 srds_s1;
|
|
|
|
srds_s1 = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
|
|
srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
|
|
|
|
initialize_lane_to_slot();
|
|
|
|
/* Initialize the mdio_mux array so we can recognize empty elements */
|
|
for (i = 0; i < NUM_FM_PORTS; i++)
|
|
mdio_mux[i] = EMI_NONE;
|
|
|
|
dtsec_mdio_info.regs =
|
|
(struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
|
|
|
|
dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
|
|
|
|
/* Register the 1G MDIO bus */
|
|
fm_memac_mdio_init(bis, &dtsec_mdio_info);
|
|
|
|
tgec_mdio_info.regs =
|
|
(struct memac_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
|
|
tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
|
|
|
|
/* Register the 10G MDIO bus */
|
|
fm_memac_mdio_init(bis, &tgec_mdio_info);
|
|
|
|
/* Register the muxing front-ends to the MDIO buses */
|
|
T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
|
|
T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2);
|
|
T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
|
|
T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
|
|
T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
|
|
T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
|
|
T2080qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
|
|
T2080qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
|
|
|
|
/* Set the two on-board RGMII PHY address */
|
|
fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR);
|
|
if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
|
|
FSL_CORENET_RCWSR13_EC2_DTSEC4_RGMII)
|
|
fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR);
|
|
else
|
|
fm_info_set_phy_address(FM1_DTSEC10, RGMII_PHY2_ADDR);
|
|
|
|
switch (srds_s1) {
|
|
case 0x1c:
|
|
case 0x95:
|
|
case 0xa2:
|
|
case 0x94:
|
|
/* SGMII in Slot3 */
|
|
fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
|
|
/* SGMII in Slot2 */
|
|
fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
|
|
break;
|
|
case 0x51:
|
|
case 0x5f:
|
|
case 0x65:
|
|
/* XAUI/HiGig in Slot3 */
|
|
fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
|
|
/* SGMII in Slot2 */
|
|
fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
|
|
break;
|
|
case 0x66:
|
|
/*
|
|
* XFI does not need a PHY to work, but to avoid U-boot use
|
|
* default PHY address which is zero to a MAC when it found
|
|
* a MAC has no PHY address, we give a PHY address to XFI
|
|
* MAC, and should not use a real XAUI PHY address, since
|
|
* MDIO can access it successfully, and then MDIO thinks
|
|
* the XAUI card is used for the XFI MAC, which will cause
|
|
* error.
|
|
*/
|
|
fm_info_set_phy_address(FM1_10GEC1, 4);
|
|
fm_info_set_phy_address(FM1_10GEC2, 5);
|
|
fm_info_set_phy_address(FM1_10GEC3, 6);
|
|
fm_info_set_phy_address(FM1_10GEC4, 7);
|
|
break;
|
|
case 0x6b:
|
|
fm_info_set_phy_address(FM1_10GEC1, 4);
|
|
fm_info_set_phy_address(FM1_10GEC2, 5);
|
|
fm_info_set_phy_address(FM1_10GEC3, 6);
|
|
fm_info_set_phy_address(FM1_10GEC4, 7);
|
|
/* SGMII in Slot2 */
|
|
fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
|
|
break;
|
|
case 0x6c:
|
|
case 0x6d:
|
|
fm_info_set_phy_address(FM1_10GEC1, 4);
|
|
fm_info_set_phy_address(FM1_10GEC2, 5);
|
|
/* SGMII in Slot3 */
|
|
fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
|
|
break;
|
|
case 0x71:
|
|
/* SGMII in Slot3 */
|
|
fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
|
|
/* SGMII in Slot2 */
|
|
fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
|
|
break;
|
|
case 0xa6:
|
|
case 0x8e:
|
|
case 0x8f:
|
|
case 0x82:
|
|
case 0x83:
|
|
/* SGMII in Slot3 */
|
|
fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
|
|
/* SGMII in Slot2 */
|
|
fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
|
|
break;
|
|
case 0xa4:
|
|
case 0x96:
|
|
case 0x8a:
|
|
/* SGMII in Slot3 */
|
|
fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
|
|
break;
|
|
case 0xd9:
|
|
case 0xd3:
|
|
case 0xcb:
|
|
/* SGMII in Slot3 */
|
|
fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT3_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR);
|
|
/* SGMII in Slot2 */
|
|
fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
|
|
idx = i - FM1_DTSEC1;
|
|
interface = fm_info_get_enet_if(i);
|
|
switch (interface) {
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
lane = serdes_get_first_lane(FSL_SRDS_1,
|
|
SGMII_FM1_DTSEC1 + idx);
|
|
if (lane < 0)
|
|
break;
|
|
slot = lane_to_slot[lane];
|
|
debug("FM1@DTSEC%u expects SGMII in slot %u\n",
|
|
idx + 1, slot);
|
|
if (QIXIS_READ(present2) & (1 << (slot - 1)))
|
|
fm_disable_port(i);
|
|
|
|
switch (slot) {
|
|
case 1:
|
|
mdio_mux[i] = EMI1_SLOT1;
|
|
fm_info_set_mdio(i, mii_dev_for_muxval(
|
|
mdio_mux[i]));
|
|
break;
|
|
case 2:
|
|
mdio_mux[i] = EMI1_SLOT2;
|
|
fm_info_set_mdio(i, mii_dev_for_muxval(
|
|
mdio_mux[i]));
|
|
break;
|
|
case 3:
|
|
mdio_mux[i] = EMI1_SLOT3;
|
|
fm_info_set_mdio(i, mii_dev_for_muxval(
|
|
mdio_mux[i]));
|
|
break;
|
|
}
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
if (i == FM1_DTSEC3)
|
|
mdio_mux[i] = EMI1_RGMII1;
|
|
else if (i == FM1_DTSEC4 || FM1_DTSEC10)
|
|
mdio_mux[i] = EMI1_RGMII2;
|
|
fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
|
|
idx = i - FM1_10GEC1;
|
|
switch (fm_info_get_enet_if(i)) {
|
|
case PHY_INTERFACE_MODE_XGMII:
|
|
if (srds_s1 == 0x51) {
|
|
lane = serdes_get_first_lane(FSL_SRDS_1,
|
|
XAUI_FM1_MAC9 + idx);
|
|
} else if ((srds_s1 == 0x5f) || (srds_s1 == 0x65)) {
|
|
lane = serdes_get_first_lane(FSL_SRDS_1,
|
|
HIGIG_FM1_MAC9 + idx);
|
|
} else {
|
|
if (i == FM1_10GEC1 || i == FM1_10GEC2)
|
|
lane = serdes_get_first_lane(FSL_SRDS_1,
|
|
XFI_FM1_MAC9 + idx);
|
|
else
|
|
lane = serdes_get_first_lane(FSL_SRDS_1,
|
|
XFI_FM1_MAC1 + idx);
|
|
}
|
|
|
|
if (lane < 0)
|
|
break;
|
|
mdio_mux[i] = EMI2;
|
|
fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
|
|
|
|
if ((srds_s1 == 0x66) || (srds_s1 == 0x6b) ||
|
|
(srds_s1 == 0x6c) || (srds_s1 == 0x6d) ||
|
|
(srds_s1 == 0x71)) {
|
|
/* As XFI is in cage intead of a slot, so
|
|
* ensure doesn't disable the corresponding port
|
|
*/
|
|
break;
|
|
}
|
|
|
|
slot = lane_to_slot[lane];
|
|
if (QIXIS_READ(present2) & (1 << (slot - 1)))
|
|
fm_disable_port(i);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
cpu_eth_init(bis);
|
|
#endif /* CONFIG_FMAN_ENET */
|
|
|
|
return pci_eth_init(bis);
|
|
}
|