sysmo-bts
/
u-boot
9
0
Fork 0
Code Pull Requests Releases Activity
u-boot/arch/arm/mach-uniphier
History
Masahiro Yamada 26b09c022a ARM: uniphier: move SBC and Support Card init code to U-Boot proper 
Initialize SBC and Support Card in U-Boot proper instead of SPL.

We may run different firmware (ex. ARM Trusted Firmware) before
U-Boot, and basic SoC initialization may be done there.  In that
case, SPL may not be used.

The motivation for preparing SBC and Support Card in SPL was to use
LED for early debugging, but this is not mandatory to boot SoCs.
With this commit, LED will be unavailable in SPL, but we can use a
debug serial instead.  So, this change will not be a big deal.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
 		2017-01-18 01:22:30 +09:00
..
arm32 ARM: uniphier: support system reset functionality for PSCI 2016-08-28 13:09:19 +09:00
arm64 ARM: uniphier: use (devm_)ioremap() instead of map_sysmem() 2016-07-24 00:13:10 +09:00
bcu ARM: uniphier: make BCU init into void function 2017-01-17 09:00:40 +09:00
boot-mode spl: uniphier: Drop spl_board_announce_boot_device() 2016-12-09 08:40:17 -05:00
clk ARM: uniphier: refactor spl_init_board() 2017-01-18 01:22:30 +09:00
debug-uart ARM: uniphier: support Debug UART 2016-03-24 01:45:41 +09:00
dram ARM: uniphier: refactor spl_init_board() 2017-01-18 01:22:30 +09:00
sbc ARM: uniphier: refactor SBC init code 2017-01-17 09:00:40 +09:00
Kconfig ARM: uniphier: support DDR PHY parameter dump command for LD11 2016-10-29 17:24:30 +09:00
Makefile ARM: uniphier: move SBC and Support Card init code to U-Boot proper 2017-01-18 01:22:30 +09:00
board_init.c ARM: uniphier: move SBC and Support Card init code to U-Boot proper 2017-01-18 01:22:30 +09:00
board_late_init.c ARM: uniphier: adjust fdt_file environment handling to latest Linux 2016-10-29 17:01:40 +09:00
boards.c ARM: dts: uniphier: sync DT with latest Linux 2016-10-18 14:06:46 +09:00
cpu_info.c ARM: uniphier: add PH1-LD11 SoC support 2016-05-26 00:37:13 +09:00
debug.h ARM: uniphier: add PSCI support for UniPhier ARMv7 SoCs 2016-08-11 17:58:06 +09:00
dram_init.c ARM: uniphier: reserve memory for DRAM PHY training on PH1-LD20 2016-06-20 07:15:33 +09:00
init.h ARM: uniphier: refactor spl_init_board() 2017-01-18 01:22:30 +09:00
memconf.c ARM: uniphier: refactor MEMCONF init code 2017-01-17 09:00:40 +09:00
micro-support-card.c ARM: uniphier: refactor Support Card init code 2017-01-17 09:00:40 +09:00
micro-support-card.h ARM: uniphier: refactor Support Card init code 2017-01-17 09:00:40 +09:00
pinctrl-glue.c ARM: uniphier: consolidate NAND pin-mux settings 2016-09-18 23:10:44 +09:00
reset.c ARM: uniphier: support system reset functionality for PSCI 2016-08-28 13:09:19 +09:00
sc-regs.h ARM: uniphier: add clock/reset settings for xHCI of ProXstream2 2016-07-24 00:44:55 +09:00
sc64-regs.h ARM: uniphier: enable clocks to MIO/STDMAC on LD11 if USB is enabled 2016-10-29 17:24:30 +09:00
sg-regs.h ARM: uniphier: add PH1-LD11 SoC support 2016-05-26 00:37:13 +09:00
soc-info.h ARM: uniphier: drop PH1- prefix from CONFIG options and file names 2016-03-24 01:42:13 +09:00
soc_info.c ARM: uniphier: drop PH1- prefix from CONFIG options and file names 2016-03-24 01:42:13 +09:00
spl_board_init.c ARM: uniphier: move SBC and Support Card init code to U-Boot proper 2017-01-18 01:22:30 +09:00