u-boot/board/bachmann/ot1200
Fabio Estevam e37197acad ot1200: Fix error handling in board_mmc_init()
When an invalid USDHC port is passed we should return -EINVAL instead of 0.

Also, return the error immediately on fsl_esdhc_initialize() failure.

Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-11-24 12:10:18 +01:00
..
Kconfig kconfig: arm: introduce symbol for ARM CPUs 2014-10-29 09:02:09 -04:00
MAINTAINERS imx6: add Bachmann OT1200 board 2014-10-06 17:24:28 +02:00
Makefile imx6: add Bachmann OT1200 board 2014-10-06 17:24:28 +02:00
mx6q_4x_mt41j128.cfg imx6: add Bachmann OT1200 board 2014-10-06 17:24:28 +02:00
ot1200.c ot1200: Fix error handling in board_mmc_init() 2014-11-24 12:10:18 +01:00
README imx6: add Bachmann OT1200 board 2014-10-06 17:24:28 +02:00

U-Boot for the Bachmann electronic GmbH OT1200 devices

There are two different versions of the base board, which differ
in the way ethernet is done. The variant detection is done during
runtime based on the address of the found phy.

- "mr" variant
FEC is connected directly to an ethernet switch (KSZ8895). The ethernet
port is always up and auto-negotiation is not possible.

- normal variant
FEC is connected to a normal phy and auto-negotiation is possible.


The variant name is part of the dtb file name loaded by u-boot. This
make is possible to boot the linux kernel and make use variant specific
devicetree (fixed-phy link).

In order to support different display resoltuions/sizes the OT1200 devices
are making use of EDID data stored in an i2c EEPROM.