u-boot/nand_spl/nand_boot_fsl_ifc.c
Dipen Dudhat 52f90dad60 nand: Freescale Integrated Flash Controller NAND support
Add NAND support (including spl) on IFC, such as is found on the p1010.

Note that using hardware ECC on IFC with small-page NAND (which is what
comes on the p1010rdb reference board) means there will be insufficient
OOB space for JFFS2, since IFC does not support 1-bit ECC.  UBI should
work, as it does not use OOB for anything but ECC.

When hardware ECC is not enabled in CSOR, software ECC is now used.

Signed-off-by: Dipen Dudhat <Dipen.Dudhat@freescale.com>
[scottwood@freescale.com: ECC rework and misc fixes]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2011-09-29 19:01:04 -05:00

272 lines
6.9 KiB
C

/*
* NAND boot for FSL Integrated Flash Controller, NAND Flash Control Machine
*
* Copyright 2011 Freescale Semiconductor, Inc.
* Author: Dipen Dudhat <dipen.dudhat@freescale.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/fsl_ifc.h>
#include <linux/mtd/nand.h>
static inline int is_blank(uchar *addr, int page_size)
{
int i;
for (i = 0; i < page_size; i++) {
if (__raw_readb(&addr[i]) != 0xff)
return 0;
}
/*
* For the SPL, don't worry about uncorrectable errors
* where the main area is all FFs but shouldn't be.
*/
return 1;
}
/* returns nonzero if entire page is blank */
static inline int check_read_ecc(uchar *buf, u32 *eccstat,
unsigned int bufnum, int page_size)
{
u32 reg = eccstat[bufnum / 4];
int errors = (reg >> ((3 - bufnum % 4) * 8)) & 15;
if (errors == 15) { /* uncorrectable */
/* Blank pages fail hw ECC checks */
if (is_blank(buf, page_size))
return 1;
puts("ecc error\n");
for (;;)
;
}
return 0;
}
static inline void nand_wait(uchar *buf, int bufnum, int page_size)
{
struct fsl_ifc *ifc = IFC_BASE_ADDR;
u32 status;
u32 eccstat[4];
int bufperpage = page_size / 512;
int bufnum_end, i;
bufnum *= bufperpage;
bufnum_end = bufnum + bufperpage - 1;
do {
status = in_be32(&ifc->ifc_nand.nand_evter_stat);
} while (!(status & IFC_NAND_EVTER_STAT_OPC));
if (status & IFC_NAND_EVTER_STAT_FTOER) {
puts("flash time out error\n");
for (;;)
;
}
for (i = bufnum / 4; i <= bufnum_end / 4; i++)
eccstat[i] = in_be32(&ifc->ifc_nand.nand_eccstat[i]);
for (i = bufnum; i <= bufnum_end; i++) {
if (check_read_ecc(buf, eccstat, i, page_size))
break;
}
out_be32(&ifc->ifc_nand.nand_evter_stat, status);
}
static inline int bad_block(uchar *marker, int port_size)
{
if (port_size == 8)
return __raw_readb(marker) != 0xff;
else
return __raw_readw((u16 *)marker) != 0xffff;
}
static void nand_load(unsigned int offs, int uboot_size, uchar *dst)
{
struct fsl_ifc *ifc = IFC_BASE_ADDR;
uchar *buf = (uchar *)CONFIG_SYS_NAND_BASE;
int page_size;
int port_size;
int pages_per_blk;
int blk_size;
int bad_marker = 0;
int bufnum_mask, bufnum;
int csor, cspr;
int pos = 0;
int j = 0;
int sram_addr;
int pg_no;
/* Get NAND Flash configuration */
csor = CONFIG_SYS_NAND_CSOR;
cspr = CONFIG_SYS_NAND_CSPR;
if (!(csor & CSOR_NAND_ECC_DEC_EN)) {
/* soft ECC in SPL is unimplemented */
puts("WARNING: soft ECC not checked in SPL\n");
} else {
u32 hwcsor;
/* make sure board is configured with ECC on boot */
hwcsor = in_be32(&ifc->csor_cs[0].csor);
if (!(hwcsor & CSOR_NAND_ECC_DEC_EN))
puts("WARNING: ECC not checked in SPL, "
"check board cfg\n");
}
port_size = (cspr & CSPR_PORT_SIZE_16) ? 16 : 8;
if (csor & CSOR_NAND_PGS_4K) {
page_size = 4096;
bufnum_mask = 1;
} else if (csor & CSOR_NAND_PGS_2K) {
page_size = 2048;
bufnum_mask = 3;
} else {
page_size = 512;
bufnum_mask = 15;
if (port_size == 8)
bad_marker = 5;
}
pages_per_blk =
32 << ((csor & CSOR_NAND_PB_MASK) >> CSOR_NAND_PB_SHIFT);
blk_size = pages_per_blk * page_size;
/* Open Full SRAM mapping for spare are access */
out_be32(&ifc->ifc_nand.ncfgr, 0x0);
/* Clear Boot events */
out_be32(&ifc->ifc_nand.nand_evter_stat, 0xffffffff);
/* Program FIR/FCR for Large/Small page */
if (page_size > 512) {
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
(IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
(IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP4_SHIFT));
out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
out_be32(&ifc->ifc_nand.nand_fcr0,
(NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
(NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT));
} else {
out_be32(&ifc->ifc_nand.nand_fir0,
(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
(IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
(IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
(IFC_FIR_OP_BTRD << IFC_NAND_FIR0_OP3_SHIFT));
out_be32(&ifc->ifc_nand.nand_fir1, 0x0);
out_be32(&ifc->ifc_nand.nand_fcr0,
NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT);
}
/* Program FBCR = 0 for full page read */
out_be32(&ifc->ifc_nand.nand_fbcr, 0);
/* Read and copy u-boot on SDRAM from NAND device, In parallel
* check for Bad block if found skip it and read continue to
* next Block
*/
while (pos < uboot_size) {
int i = 0;
do {
pg_no = offs / page_size;
bufnum = pg_no & bufnum_mask;
sram_addr = bufnum * page_size * 2;
out_be32(&ifc->ifc_nand.row0, pg_no);
out_be32(&ifc->ifc_nand.col0, 0);
/* start read */
out_be32(&ifc->ifc_nand.nandseq_strt,
IFC_NAND_SEQ_STRT_FIR_STRT);
/* wait for read to complete */
nand_wait(&buf[sram_addr], bufnum, page_size);
/*
* If either of the first two pages are marked bad,
* continue to the next block.
*/
if (i++ < 2 &&
bad_block(&buf[sram_addr + page_size + bad_marker],
port_size)) {
puts("skipping\n");
offs = (offs + blk_size) & ~(blk_size - 1);
pos &= ~(blk_size - 1);
break;
}
for (j = 0; j < page_size; j++)
dst[pos + j] = __raw_readb(&buf[sram_addr + j]);
pos += page_size;
offs += page_size;
} while ((offs & (blk_size - 1)) && (pos < uboot_size));
}
}
/*
* Main entrypoint for NAND Boot. It's necessary that SDRAM is already
* configured and available since this code loads the main U-boot image
* from NAND into SDRAM and starts from there.
*/
void nand_boot(void)
{
__attribute__((noreturn)) void (*uboot)(void);
/*
* Load U-Boot image from NAND into RAM
*/
nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
(uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
#ifdef CONFIG_NAND_ENV_DST
nand_load(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
(uchar *)CONFIG_NAND_ENV_DST);
#ifdef CONFIG_ENV_OFFSET_REDUND
nand_load(CONFIG_ENV_OFFSET_REDUND, CONFIG_ENV_SIZE,
(uchar *)CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE);
#endif
#endif
/*
* Jump to U-Boot image
*/
/*
* Clean d-cache and invalidate i-cache, to
* make sure that no stale data is executed.
*/
flush_cache(CONFIG_SYS_NAND_U_BOOT_DST, CONFIG_SYS_NAND_U_BOOT_SIZE);
uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
uboot();
}