Holger Hans Peter Freyther cfc204637d sysmobts-v2: Introduce a recovery command to reflash the system image ... When pressing the reset button on boot the system will enter the recovery mode, this is done by setting a preboot command. Inside the preboot command we will sleep and then check if the button is still pressed, then tftp will be used to download the image and flash it. If something fails after the DHCP state the network console will be enabled.		2013-01-18 16:18:08 +01:00
..
da8xxevm	common: Add .u_boot_list into all linker files	2012-10-22 08:29:42 -07:00
dm355evm	punt unused clean/distclean targets	2011-10-15 22:20:36 +02:00
dm355leopard	punt unused clean/distclean targets	2011-10-15 22:20:36 +02:00
dm365evm	punt unused clean/distclean targets	2011-10-15 22:20:36 +02:00
dm6467evm	dm6467Tevm: Use a common configuration file for davinci_dm6467evm and davinci_dm6467Tevm	2012-02-27 21:19:24 +01:00
dvevm	punt unused clean/distclean targets	2011-10-15 22:20:36 +02:00
ea20	davinci: ea20: the console is always set to the serial line	2012-10-01 10:02:13 -07:00
schmoogie	davinci_schmoogie: define CONFIG_MACH_TYPE for davinci_schmoogie board	2011-11-29 15:43:39 +01:00
sffsdr	punt unused clean/distclean targets	2011-10-15 22:20:36 +02:00
sonata	davinci_sonata: define CONFIG_MACH_TYPE for davinci_sonata board	2011-11-29 15:43:40 +01:00
sysmobts_v1	sysmobts_v1: Add support for the sysmocom bts version one.	2013-01-18 16:18:07 +01:00
sysmobts_v2	sysmobts-v2: Introduce a recovery command to reflash the system image	2013-01-18 16:18:08 +01:00