Holger Hans Peter Freyther cfc204637d sysmobts-v2: Introduce a recovery command to reflash the system image ... When pressing the reset button on boot the system will enter the recovery mode, this is done by setting a preboot command. Inside the preboot command we will sleep and then check if the button is still pressed, then tftp will be used to download the image and flash it. If something fails after the DHCP state the network console will be enabled.		2013-01-18 16:18:08 +01:00
..
Makefile	sysmobts_v2: Add support for the sysmocom bts version two.	2013-01-18 16:18:07 +01:00
board_init.S	sysmobts_v2: Add support for the sysmocom bts version two.	2013-01-18 16:18:07 +01:00
config.mk	sysmobts_v2: Add support for the sysmocom bts version two.	2013-01-18 16:18:07 +01:00
sysmobts_v2.c	sysmobts-v2: Introduce a recovery command to reflash the system image	2013-01-18 16:18:08 +01:00