STIR/SHAKEN encodes using base64 URL format. Currently, we just use
base64. New functions have been added that convert to and from base64
encoding.
The origid field should also be an UUID. This means there's no reason to
have it as an option in stir_shaken.conf, as we can simply generate one
when creating the Identity header.
https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021
Change-Id: Icf094a2a54e87db91d6b12244c9f5ba4fc2e0b8c
During OpenSIPit, we found out that the public certificates must be of
type X.509. When reading in public keys, we use the corresponding X.509
functions now.
We also discovered that we needed a better naming scheme for the
certificates since certificates with the same name would cause issues
(overwriting certs, etc.). Now when we download a public certificate, we
get the serial number from it and use that as the name of the cached
certificate.
The configuration option public_key_url in stir_shaken.conf has also
been renamed to public_cert_url, which better describes what the option
is for.
https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021
Change-Id: Ia00b20835f5f976e3603797f2f2fb19672d8114d
Added support for a basic AEAP configuration read from aeap.conf.
Also added 2 CLI commands for showing individual configurations as
well as all of them: aeap show server <id> and aeap show servers.
Only one configuration option is required at the moment, and that one is
server_url. It must be a websocket URL. The other option, codecs, is
optional and will be used over the codecs specified on the endpoint if
provided.
https://wiki.asterisk.org/wiki/pages/viewpage.action?pageId=45482453
Change-Id: I567ac5148c92b98d29d2ad83421b416b75ffdaa3
Added .log extension to the sample logs in logger.conf.sample so that
they will be able to be opened in the browser when attached to JIRA
tickets. Because of this, asterisk.logrotate has also been updated to
look for .log extensions instead of no extension for log files such as
full and messages.
Change-Id: I5de743c03f08047d6c6cc80cac5019ae0c4c200f
Also removed the sample documentation, and some oddly-placed
documentation about the timeout argument to the Queue() application
itself. There is a large section on the timeout behavior below.
ASTERISK-26614 #close
Change-Id: I8f84e8304b50305b7c4cba2d9787a5d77c3a6217
minargs enables enforcing of minimum count of arguments to pass to
func_odbc, so if you're unconditionally using ARG1 through ARG4 then
this should be set to 4. func_odbc will generate an error in this case,
so for example
[FOO]
minargs = 4
and ODBC_FOO(a,b,c) in dialplan will now error out instead of using a
potentially leaked ARG4 from Gosub().
ARGC is needed if you're using optional argument, to verify whether or
not an argument has been passed, else it's possible to use a leaked ARGn
from Gosub (app_stack). So now you can safely do
${IF($[${ARGC}>3]?${ARGV}:default value)} kind of thing.
Change-Id: I6ca0b137d90b03f6aa9c496991f6cbf1518f6c24
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
If there's no secret specified for an iax2 peer and there's no secret
specified in the dial string, Asterisk will crash if the auth method
requested by the peer is MD5 or plaintext. You also couldn't specify
a default auth method in the [general] section of iax.conf so if you
don't have static peers defined and just use the dial string, Asterisk
will still crash even if you have a secret specified in the dial string.
* Added logic to iax2_call() and authenticate_reply() to print
a warning and hanhup the call if encryption is requested and
there's no secret or auth method. This prevents the crash.
* Added the ability to specify a default "auth" in the [general]
section of iax.conf.
ASTERISK-29624
Reported by: N A
Change-Id: I5928e16137581f7d383fcc7fa04ad96c919e6254
As described in the issue, /tmp is not a suitable location for a
large amount of cached media files, since most distributions make
/tmp a RAM-based tmpfs mount with limited capacity.
I opted for a location that can be configured separately, as opposed
to using a subdirectory of spooldir, given the different storage
profile (transient files vs files that might stay there indefinitely).
This commit just makes the cache directory configurable, and changes
the default location from /tmp to /var/cache/asterisk.
ASTERISK-29143
Change-Id: Ic54e95199405abacd9e509cef5f08fa14c510b5d
Currently any response from res_curl where we get an answer from the
web server, regardless of what the response is (404, 403 etc.) Asterisk
currently treats it as a success. This patch allows you to set which
codes should be considered as a failure by Asterisk. If say we set
failurecodes=404,403 then when using curl in realtime if a server gives
a 404 error Asterisk will try to failover to the next option set in
extconfig.conf
ASTERISK-28825
Reported by: Dovid Bender
Code by: Gobinda Paul
Change-Id: I94443e508343e0a3e535e51ea6e0562767639987
This changes the outgoing offer call preference
default option to match the behavior of previous
versions of Asterisk.
The additional advanced codec negotiation options
have also been removed from the sample configuration
and marked as reserved for future functionality in
XML documentation.
The codec preference options have also been fixed to
enforce local codec configuration.
ASTERISK-29109
Change-Id: Iad19347bd5f3d89900c15ecddfebf5e20950a1c2
app_confbridge now has the ability to set the estimated bitrate on an
SFU bridge. To use it, set a bridge profile's remb_behavior to "force"
and set remb_estimated_bitrate to a rate in bits per second. The
remb_estimated_bitrate parameter is ignored if remb_behavior is something
other than "force".
Change-Id: Idce6464ff014a37ea3b82944452e56cc4d75ab0a
Since ASTERISK_27978 the default is not off but 90 seconds. That change
happened because ASTERISK_27347 disabled the keep-alives in the bundled
PJProject and Asterisk should behave the same as before.
Change-Id: Ie63dc558ade6a5a2b969c30a4bd492d63730dc46
Added a new log formatter called "plain" that always prints
file, function and line number if available (even for verbose
messages) and never prints color control characters. It also
doesn't apply any special formatting for verbose messages.
Most suitable for file output but can be used for other channels
as well.
You use it in logger.conf like so:
debug => [plain]debug
console => [plain]error,warning,debug,notice,pjsip_history
messages => [plain]warning,error,verbose
Change-Id: I4fdfe4089f66ce2f9cb29f3005522090dbb5243d
This change renames the codec preference endpoint options.
incoming_offer_codec_prefs becomes codec_prefs_incoming_offer
to keep the options together when showing an endpoint.
Change-Id: I6202965b4723777f22a83afcbbafcdafb1d11c8d
Added a new configuration option for PJSIP endpoints - stir_shaken. If
set to yes, then STIR/SHAKEN support will be added to inbound and
outbound INVITEs. The default is no. Alembic has been updated to include
this option.
Previously the dialplan function was not trimming the whitespace from
the parameters it recieved. Now it does.
Also added a conditional that, when TEST_FRAMEWORK is enabled, the
timestamp in the identity header will be overlooked. This is just for
testing, since the testsuite will rely on a SIPp scenario with a preset
identity header to trigger the MISMATCH result.
Change-Id: I43d67f1489b8c1c5729ed3ca8d71e35ddf438df1
If your queues.conf had _no_ [general] section, they would default to
'yes'. Now, they always default to 'no'.
(Actually, commit ed615afb7e already
partially fixed it for shared_lastcall.)
ASTERISK-28951
Change-Id: Ic39d8a0202906bc454194368bbfbae62990fe5f6
This commit adds the endpoint options required to control
Advanced Codec Negotiation.
incoming_offer_codec_prefs
outgoing_offer_codec_prefs
incoming_answer_codec_prefs
outgoing_answer_codec_prefs
The documentation may need tweaking and some additional edits
added, especially for the "answer" prefs. That'll be handled
when things finalize.
This commit is safe to merge as it doens't alter any existing
functionality nor does it alter the previous codec negotiation
work which may now be obsolete.
Change-Id: I920ba925d7dd36430dfd2ebd9d82d23f123d0e11
Currently when the pjsip making an outgoing request, it keep adding the
rport parameter in a request message as a default.
This causes unexpected rport handle at the other end.
Added option for disable this behaviour in the pjsip.conf.
This is a system option, but working as a gloabl option.
ASTERISK-28959
Change-Id: I9596675e52a742774738b5aad5d1fec32f477abc
Integrated STIR/SHAKEN support with outgoing INVITEs. When an INVITE is
sent, the caller ID will be checked to see if there is a certificate
that corresponds to it. If so, that information will be retrieved and an
Identity header will be added to the SIP message. The format is:
header.payload.signature;info=<public_key_url>alg=ES256;ppt=shaken
Header, payload, and signature are all BASE64 encoded. The public key
URL is retrieved from the certificate. Currently the algorithm and ppt
are ES256 and shaken, respectively. This message is signed and can be
used for verification on the receiving end.
Two new configuration options have been added to the certificate object:
attestation and origid. The attestation is required and must be A, B, or
C. origid is the origination identifier.
A new utility function has been added as well that takes a string,
allocates space, BASE64 encodes it, then returns it, eliminating the
need to calculate the size yourself.
Change-Id: I1f84d6a5839cb2ed152ef4255b380cfc2de662b4
What's wrong with ast_debug?
ast_debug is fine for general purpose debug output but it's not
really geared for scope tracing since it doesn't present its
output in a way that makes capturing and analyzing flow through
Asterisk easy.
How is scope tracing better?
Scope tracing uses the same "cleanup" attribute that RAII_VAR
uses to print messages to a separate "trace" log level. Even
better, the messages are indented and unindented based on a
thread-local call depth counter. When output to a separate log
file, the output is uncluttered and easy to follow.
Here's an example of the output. The leading timestamps and
thread ids are removed and the output cut off at 68 columns for
commit message restrictions but you get the idea.
--> res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001
--> res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173
--> res_pjsip_session.c:3669 handle_incoming_response PJSIP/
--> chan_pjsip.c:3265 chan_pjsip_incoming_response_after
--> chan_pjsip.c:3194 chan_pjsip_incoming_response P
chan_pjsip.c:3245 chan_pjsip_incoming_respon
<-- chan_pjsip.c:3194 chan_pjsip_incoming_response P
<-- chan_pjsip.c:3265 chan_pjsip_incoming_response_after
<-- res_pjsip_session.c:3669 handle_incoming_response PJSIP/
<-- res_pjsip_session.c:3661 handle_incoming_response PJSIP/1173
<-- res_pjsip_session.c:3680 handle_incoming PJSIP/1173-00000001
The messages with the "-->" or "<--" were produced by including
the following at the top of each function:
SCOPE_TRACE(1, "%s\n", ast_sip_session_get_name(session));
Scope isn't limited to functions any more than RAII_VAR is. You
can also see entry and exit from "if", "for", "while", etc blocks.
There is also an ast_trace() macro that doesn't track entry or
exit but simply outputs a message to the trace log using the
current indent level. The deepest message in the sample
(chan_pjsip.c:3245) was used to indicate which "case" in a
"select" was executed.
How do you use it?
More documentation is available in logger.h but here's an overview:
* Configure with --enable-dev-mode. Like debug, scope tracing
is #ifdef'd out if devmode isn't enabled.
* Add a SCOPE_TRACE() call to the top of your function.
* Set a logger channel in logger.conf to output the "trace" level.
* Use the CLI (or cli.conf) to set a trace level similar to setting
debug level... CLI> core set trace 2 res_pjsip.so
Summary Of Changes:
* Added LOG_TRACE logger level. Actually it occupies the slot
formerly occupied by the now defunct "event" level.
* Added core asterisk option "trace" similar to debug. Includes
ability to specify global trace level in asterisk.conf and CLI
commands to turn on/off and set levels. Levels can be set
globally (probably not a good idea), or by module/source file.
* Updated sample asterisk.conf and logger.conf. Tracing is
disabled by default in both.
* Added __ast_trace() to logger.c which keeps track of the indent
level using TLS. It's #ifdef'd out if devmode isn't enabled.
* Added ast_trace() and SCOPE_TRACE() macros to logger.h.
These are all #ifdef'd out if devmode isn't enabled.
Why not use gcc's -finstrument-functions capability?
gcc's facility doesn't allow access to local data and doesn't
operate on non-function scopes.
Known Issues:
The only know issue is that we currently don't know the line
number where the scope exited. It's reported as the same place
the scope was entered. There's probably a way to get around it
but it might involve looking at the stack and doing an 'addr2line'
to get the line number. Kind of like ast_backtrace() does.
Not sure if it's worth it.
Change-Id: Ic5ebb859883f9c10a08c5630802de33500cad027
Adds the "STIR_SHAKEN" dialplan function and an API call to add a
STIR_SHAKEN verification result to a channel. This information will be
held in a datastore on the channel that can later be queried through the
"STIR_SHAKEN" dialplan funtion to get information on STIR_SHAKEN results
including identity, attestation, and verify_result. Here are some
examples:
STIR_SHAKEN(count)
STIR_SHAKEN(0, identity)
STIR_SHAKEN(1, attestation)
STIR_SHAKEN(2, verify_result)
Getting the count can be used to iterate through the results and pull
information by specifying the index and the field you want to retrieve.
Change-Id: Ice6d52a3a7d6e4607c9c35b28a1f7c25f5284a82
When in a conference bridge it may be necessary to have
text messages disabled for specific participants or for
all. This change adds a configuration option, "text_messaging",
which can be used to enable or disable this on the
user profile. By default existing behavior is preserved
as it defaults to "yes".
ASTERISK-28841
Change-Id: I30b5d9ae6f4803881d1ed9300590d405e392bc13
Based on this new endpoint setting, a joint list of preferred codecs
between those received from the Asterisk core (remote), and those
specified in the endpoint's "allow" parameter (local) is created and
is used to create the outgoing SDP offer.
* Add outgoing_call_offer_pref to pjsip_configuration (endpoint)
* Add "call_direction" to res_pjsip_session.
* Update pjsip_session_caps.c to make the functions more generic
so they could be used for both incoming and outgoing.
* Update ast_sip_session_create_outgoing to create the
pending_media_state->topology with the results of
ast_sip_session_create_joint_call_stream().
* The endpoint "preferred_codec_only" option now automatically sets
AST_SIP_CALL_CODEC_PREF_FIRST in incoming_call_offer_pref.
* A helper function ast_stream_get_format_count() was added to
streams to return the current count of formats.
ASTERISK-28777
Change-Id: Id4ec0b4a906c2ae5885bf947f101c59059935437
A pure blacklist is not good enough, we need a whitelist mechanism as
well, and the simplest way to do that is to re-use existing ACL
infrastructure.
This makes it simpler to blacklist say an entire block (/24) except a
smaller block (eg, a /29 or even a /32). Normally you'd need to
recursively split the block, so if you want to blacklist a /24 except
for a /29 you'd end up with a blacklit for a /25, /26, /27 and /28. I
feel that having an ACL instead of a blacklist only is clearer.
Change-Id: Id57a8df51fcfd3bd85ea67c489c85c6c3ecd7b30
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Add a new option, incoming_call_offer_pref, to res_pjsip endpoints that
specifies the preferred order of codecs after receiving an offer.
This patch does the following:
Adds a new enumeration, ast_sip_call_codec_pref, used by the the new
configuration option that's added to the endpoint media structure.
Adds a new ast_sip_session_caps structure that's set for each session media
object.
Creates a new file, res_pjsip_session_caps that "implements" the new
structure and option, and is compiled into the res_pjsip_session library.
ASTERISK-28756 #close
Change-Id: I35e7a2a0c236cfb6bd9cdf89539f57a1ffefc76f
In order to reduce the amount of AMI and ARI events generated,
the global "Message/ast_msg_queue" channel can be set to suppress
it's normal channel housekeeping events such as "Newexten",
"VarSet", etc. This can greatly reduce load on the manager
and ARI applications when the Digium Phone Module for Asterisk
is in use. To enable, set "hide_messaging_ami_events" in
asterisk.conf to "yes" In Asterisk versions <18, the default
is "no" preserving existing behavior. Beginning with
Asterisk 18, the option will default to "yes".
NOTE: This change does not affect UserEvents or the ARI
TextMessageReceived events.
* Added the "hide_messaging_ami_events" option to asterisk.conf.
* Changed message.c to set the AST_CHAN_TP_INTERNAL property on
the "Message/ast_msg_queue" channel if the option is set in
asterisk.conf. This suppresses the reporting of the events.
Change-Id: Ia2e3516d43f4e0df994fc6598565d6bba2d7018b
It said "restrict [...] which peers should be able to pass [audio]
to each other".
However, these settings are not global (for which you would expect
signaling IPs to be checked). These settings are available per peer
only, and the IPs being checked, are the RTP IPs.
Change-Id: I2a6c6cd7c2f5f30d1df4844e3e0308a077021660
Add a new configuration option 'enable_status' which allows the
/httpstatus URI handler to be administratively disabled.
We also no longer unconditionally register the /static and /httpstatus
URI handlers, but instead do it based upon configuration.
Behavior change: If enable_static was turned off, the URI handler was
still installed but returned a 403 when it was accessed. Because we
now register/unregister the URI handlers as appropriate, if the
/static URI is disabled we will return a 404 instead.
Additionally:
* Change 'enablestatic' to 'enable_static' but keep the former for
backwards compatibility.
* Improve some internal variable names
ASTERISK-28710 #close
Change-Id: I647510f796473793b1d3ce1beb32659813be69e1
Adds source port matching support when IP matching is used:
[example]
type = identify
match = 1.2.3.4:5060/32, 1.2.3.4:6000/32, asterisk.org:4444
If the IP matches but the source port does not, we reject and search for
alternatives. SRV lookups are still performed if enabled (srv_lookups = yes),
unless the configured FQDN includes a port number in which case just a host
lookup is performed.
ASTERISK-28639 #close
Reported by: Mitch Claborn
Change-Id: I256d5bd5d478b95f526e2f80ace31b690eebba92
ConfBridge has the ability to move between different sample
rates for mixing the conference bridge. Up until now there has
only been the ability to set the conference bridge to mix at
a specific sample rate, or to let it move between sample rates
as necessary. This change adds the ability to configure a
conference bridge with a maximum sample rate so it can move
between sample rates but only up to the configured maximum.
ASTERISK-28658
Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee
Allow the list of files to be played to be provided explicitly in the
music class's configuration. The primary driver for this change is to
allow URLs to be used for MoH.
Change-Id: I9f43b80b43880980b18b2bee26ec09429d0b92fa
Changes made to apps/Makefile to optionally build all three app_voicemail
variations at the same time: 1) file (default), 2) odbc, and 3) imap.
This functionality was requested by users. modules.conf.sample warns the
user to make sure only one voicemail is loaded at a time.
Change-Id: Iba3cd8ffb4b7e8b1c64a11dd383e1eafcd3ed0e7
This change adds support for larger TLS certificates by allowing
OpenSSL to fragment the DTLS packets according to the configured
MTU. By default this is set to 1200.
This is accomplished by implementing our own BIO method that
supports MTU querying. The configured MTU is returned to OpenSSL
which fragments the packet accordingly. When a packet is to be
sent it is done directly out the RTP instance.
ASTERISK-28018
Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06
This patch adds basic Asterisk channel statistics to the res_prometheus
module. This includes:
* asterisk_calls_sum: A running sum of the total number of
processed calls
* asterisk_calls_count: The current number of calls
* asterisk_channels_count: The current number of channels
* asterisk_channels_state: The state of any particular channel
* asterisk_channels_duration_seconds: How long a channel has existed,
in seconds
In all cases, enough information is provided with each channel metric
to determine a unique instance of Asterisk that provided the data, as
well as the name, type, unique ID, and - if present - linked ID of each
channel.
ASTERISK-28403
Change-Id: I0db306ec94205d4f58d1e7fbabfe04b185869f59
Prometheus is the defacto monitoring tool for containerized applications.
This patch adds native support to Asterisk for serving up Prometheus
compatible metrics, such that a Prometheus server can scrape an Asterisk
instance in the same fashion as it does other HTTP services.
The core module in this patch provides an API that future work can build
on top of. The API manages metrics in one of two ways:
(1) Registered metrics. In this particular case, the API assumes that
the metric (either allocated on the stack or on the heap) will have
its value updated by the module registering it at will, and not
just when Prometheus scrapes Asterisk. When a scrape does occur,
the metrics are locked so that the current value can be retrieved.
(2) Scrape callbacks. In this case, the API allows consumers to be
called via a callback function when a Prometheus initiated scrape
occurs. The consumers of the API are responsible for populating
the response to Prometheus themselves, typically using stack
allocated metrics that are then formatted properly into strings
via this module's convenience functions.
These two mechanisms balance the different ways in which information is
generated within Asterisk: some information is generated in a fashion
that makes it appropriate to update the relevant metrics immediately;
some information is better to defer until a Prometheus server asks for
it.
Note that some care has been taken in how metrics are defined to
minimize the impact on performance. Prometheus's metric definition
and its support for nesting metrics based on labels - which are
effectively key/value pairs - can make storage and managing of metrics
somewhat tricky. While a naive approach, where we allow for any number
of labels and perform a lot of heap allocations to manage the information,
would absolutely have worked, this patch instead opts to try to place
as much information in length limited arrays, stack allocations, and
vectors to minimize the performance impacts of scrapes. The author of
this patch has worked on enough systems that were driven to their knees
by poor monitoring implementations to be a bit cautious.
Additionally, this patch only adds support for gauges and counters.
Additional work to add summaries, histograms, and other Prometheus
metric types may add value in the future. This would be of particular
interest if someone wanted to track SIP response types.
Finally, this patch includes unit tests for the core APIs.
ASTERISK-28403
Change-Id: I891433a272c92fd11c705a2c36d65479a415ec42
You can now add the "include_local_address" flag to an entry in
rtp.conf "[ice_host_candidates]" to include both the advertized
address and the local address in ICE negotiation:
[ice_host_candidates]
192.168.1.1 = 1.2.3.4,include_local_address
This causes both 192.168.1.1 and 1.2.3.4 to be advertized.
Change-Id: Ide492cd45ce84546175ca7d557de80d9770513db
When producing a combined REMB value the normal behavior
is to have a REMB value which is unique for each sender
based on all of their receivers. This can result in one
sender having low bitrate while all the rest are high.
This change adds "all" variants which produces a bridge
level REMB value instead. All REMB reports are combined
together into a single REMB value that is the same for
each sender.
ASTERISK-28401
Change-Id: I883e6cc26003b497c8180b346111c79a131ba88c
There a long history here:
In commit dd1e62c095 has introduce by default shared_lastcall = true by
default but this now only happen is there not [general] directive in
queues.conf
After that, the commit 4b50e3f1ee fix the
sample file.
We'll need to keep the same setting if there a general or not section in
configuration file since the shared_lastcall is by a long time in
sample files as default value to 'no'.
Change-Id: Id44faec370136df8d57902b453ad4059ed21b94c
Added a new PJSIP global setting called norefersub.
Default is true to keep support working as before.
res_pjsip_refer: Configures PJSIP norefersub capability accordingly.
Checks the PJSIP global setting value.
If it is true (default) it adds the norefersub capability to PJSIP.
If it is false (disabled) it does not add the norefersub capability
to PJSIP.
This is useful for Cisco switches that do not follow RFC4488.
ASTERISK-28375 #close
Reported-by: Dan Cropp
Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9
chan_sip will always ignore 183 responses that do not contain SDP
however, chan_pjsip will currently always translate it into a
183 with SDP. This new flag allows chan_pjsip to have the same
behavior as chan_sip.
ASTERISK-28322 #close
Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a
The res_pjsip_websocket module requires the res_http_websocket
module so ensure it is loaded. As well the res_pjsip_notify
module needs the pjsip_notify.conf configuration file so
ensure it is installed.
ASTERISK-28272
Change-Id: I261659b84e7a6ac4cb49990d9badb4b2ad01bacd
To prevent one subsystem's taskprocessors from causing others
to stall, new capabilities have been added to taskprocessors.
* Any taskprocessor name that has a '/' will have the part
before the '/' saved as its "subsystem".
Examples:
"sorcery/acl-0000006a" and "sorcery/aor-00000019"
will be grouped to subsystem "sorcery".
"pjsip/distributor-00000025" and "pjsip/distributor-00000026"
will bn grouped to subsystem "pjsip".
Taskprocessors with no '/' have an empty subsystem.
* When a taskprocessor enters high-water alert status and it
has a non-empty subsystem, the subsystem alert count will
be incremented.
* When a taskprocessor leaves high-water alert status and it
has a non-empty subsystem, the subsystem alert count will be
decremented.
* A new api ast_taskprocessor_get_subsystem_alert() has been
added that returns the number of taskprocessors in alert for
the subsystem.
* A new CLI command "core show taskprocessor alerted subsystems"
has been added.
* A new unit test was addded.
REMINDER: The taskprocessor code itself doesn't take any action
based on high-water alerts or overloading. It's up to taskprocessor
users to check and take action themselves. Currently only the pjsip
distributor does this.
* A new pjsip/global option "taskprocessor_overload_trigger"
has been added that allows the user to select the trigger
mechanism the distributor uses to pause accepting new requests.
"none": Don't pause on any overload condition.
"global": Pause on ANY taskprocessor overload (the default and
current behavior)
"pjsip_only": Pause only on pjsip taskprocessor overloads.
* The core pjsip pool was renamed from "SIP" to "pjsip" so it can
be properly grouped into the "pjsip" subsystem.
* stasis taskprocessor names were changed to "stasis" as the
subsystem.
* Sorcery core taskprocessor names were changed to "sorcery" to
match the object taskprocessors.
Change-Id: I8c19068bb2fc26610a9f0b8624bdf577a04fcd56
When Asterisk is connected and used with a database the response
time of the database can cause problems in Asterisk if it is long.
Normally the only way to see this problem would be to retrieve a
backtrace from Asterisk and examine where things are blocked, or
examine the database to see if there is any indication of a
problem.
This change adds some basic query logging to make it easier to
investigate such a problem. When logging is enabled res_odbc will
now keep track of the number of queries executed, as well as the
query that has taken the longest time to execute. There is also
an option which will cause a WARNING message to be output if a
query takes longer than a configurable amount of time to execute.
This makes it easier and clearer for users that their database may
be experiencing a problem that could impact Asterisk.
ASTERISK-28277
Change-Id: I173cf4928b10754478a6a8c27dfa96ede0f058a6
The option value "sdp" for some of the settings was removed a while back,
however the sample conf was not updated.
This patch removes any wording with regards to the old "sdp" option value,
and adjusts the defaults to what they are now.
ASTERISK-28263
Change-Id: I41bfa44e9f69446bcc5c8fd92e3675c676fdc445
You can now define an "aliases" context in voicemail.conf
whose entries point to actual mailboxes. These can be used anywhere
the mailbox is specified.
Example:
[general]
aliasescontext = myaliases
[default]
1234 = yadayada
[myaliases]
4321@devices = 1234@default
Now you can use 4321@devices to refer to the 1234@default mailbox.
This can be useful to provide channel drivers with constant
mailbox specifications such as <extension>@devices leaving
app_voicemail to control exactly which mailbox the alias points to.
Now, only voicemail has to be reloaded to make changes instead of
individual channel drivers which are usually more expensive to
reload.
Change-Id: I395b9205c91523a334fe971be0d1de4522067b04
The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out
the ContactStatus AMI event when a contact is updated.
Thist change broke things which rely on old behavior.
This patch adds a new PJSIP global configuration option
'send_contact_status_on_update_registration' to be able to preserve old
ContactStatus behavior.
By default new behavior, i.e. the ContactStatus event will not be sent when a
device refreshes its registration.
Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46
This reverts commit 29115e2384.
That commit closed a long standing hole which allowed subscriptions
to mailboxes that weren't configured in voicemail.conf. This
caused an issue with FreePBX which depdended on that behavior.
The commit is being reverted until FreePBX can handle the new
behavior.
ASTERISK-28151
Reported by: Ronald Raikes
Change-Id: I57b7b85e75d7dd97c742b5c69d718a0f61260c15
When a channel snapshot was created it used to be done
from scratch, copying all data (many strings). This incurs
a cost when doing so.
This change segments the channel snapshot into different
components which can be reused if unchanged from the
previous snapshot creation, reducing the cost. In normal
cases this results in some pointers being copied with
reference count being bumped, some integers being set,
and a string or two copied. The other benefit is that it
is now possible to determine if a channel snapshot update
is redundant and thus stop it before a message is published
to stasis.
The specific segments in the channel snapshot were split up
based on whether they are changed together, how often they
are changed, and their general grouping. In practice only
1 (or 0) of the segments actually get changed in normal
operation.
Invalidation is done by setting a flag on the channel when
the segment source is changed, forcing creation of a new
segment when the channel snapshot is created.
ASTERISK-28119
Change-Id: I5d7ef3df963a88ac47bc187d73c5225c315f8423
This patch adds new options 'trust_connected_line' and 'send_connected_line'
to the endpoint.
The option 'trust_connected_line' is to control if connected line updates
are accepted from this endpoint.
The option 'send_connected_line' is to control if connected line updates
can be sent to this endpoint.
The default value is 'yes' for both options.
Change-Id: I16af967815efd904597ec2f033337e4333d097cd
This officially deprecates chan_sip in Asterisk 17+. A warning is
printed upon startup or module load to tell users that they should
consider migrating. chan_sip is still built by default but the default
modules.conf skips loading it at startup.
Very important to note we are not scheduling a time where chan_sip will
be removed. The goal of this change is to accurately inform end users
of the current state of chan_sip and encourage movement to the fully
supported chan_pjsip.
Change-Id: Icebd8848f63feab94ef882d36b2e99d73155af93
This change implements a few different generic things which were brought
on by Google Voice SIP.
1. The concept of flow transports have been introduced. These are
configurable transports in pjsip.conf which can be used to reference a
flow of signaling to a target. These have runtime configuration that can
be changed by the signaling itself (such as Service-Routes and
P-Preferred-Identity). When used these guarantee an individual connection
(in the case of TCP or TLS) even if multiple flow transports exist to the
same target.
2. Service-Routes (RFC 3608) support has been added to the outbound
registration module which when received will be stored on the flow
transport and used for requests referencing it.
3. P-Associated-URI / P-Preferred-Identity (RFC 3325) support has been
added to the outbound registration module. If a P-Associated-URI header
is received it will be used on requests as the P-Preferred-Identity.
4. Configurable outbound extension support has been added to the outbound
registration module. When set the extension will be placed in the
Supported header.
5. Header parameters can now be configured on an outbound registration
which will be placed in the Contact header.
6. Google specific OAuth / Bearer token authentication
(draft-ietf-sipcore-sip-authn-02) has been added to the outbound
registration module.
All functionality changes are controlled by pjsip.conf configuration
options and do not affect non-configured pjsip endpoints otherwise.
ASTERISK-27971 #close
Change-Id: Id214c2d1c550a41fcf564b7df8f3da7be565bd58
When networks experience disruptions, there can be large gaps of time
between receiving packets. When strictrtp is enabled, this created
issues where a flood of packets could come in and be seen as an attack.
Another option - seqno - has been added to the strictrtp option that
ignores the time interval and goes strictly by sequence number for
validity.
Change-Id: I8a42b8d193673899c8fc22fe7f98ea87df89be71
app_voicemail was using the stasis cache to build and maintain a
list of mailboxes that had subscribers. It then used this list
to determine if a mailbox should be polled for new messages if
polling was enabled. For this to work, stasis had to cache every
subscription and unsubscription to the mailbox which caused a lot of
overhead, both cpu and memory related.
Since polling is only required when changes are being made to
mailboxes outside of app_voicemail and since the number of mailboxes
that don't have any subscribers is likely to be very low, all
mailboxes are now polled instead of just the ones with subscribers.
This paves the way for disabling the caching of stasis subscription
change messages.
Also fixed cleanup in some of the unit tests that not only left
test users in the users list but also caused segfaults if the tests
were run more than once.
ASTERISK-27121
Change-Id: I5cceb737246949f9782955c64425b8bd25a9e9ee
Change disables loading of res_hep.so in default installation. Loading
res_hep has a performance impact whether it's used or not. This disables
loading of it in sample config files.
Change-Id: I5ec150cf941634fabc72973e5bf1a965cb0ef9d0
It is valid for a config file to be empty or contain only comments, but
not valid for a config value to be set when no uncommented context
exists. This caused an error to be loged numerous times during start
when loading the default pjsip.conf.
Change-Id: Icf3b0d69b4ecb6e935eecd43c99ed8b32a5a1cf6
A new option 'suppress_q850_reason_headers' has been added to the
endpoint object. Some devices can't accept multiple Reason headers and
get confused when both 'SIP' and 'Q.850' Reason headers are received.
This option allows the 'Q.850' Reason header to be suppressed.
The default value is 'no'.
ASTERISK-27949
Reported-by: Ross Beer
Change-Id: I54cf37a827d77de2079256bb3de7e90fa5e1deb1
The Websocket transport uses the built-in HTTP server. As a result
the TLS configuration is done in http.conf and not in pjsip.conf.
This change adds a warning if this is configured in pjsip.conf and
also clarifies in the sample configuration file.
Change-Id: I187d994d328c3ed274b6754fd4c2a4955bdc6dd9
pjproject by default currently will follow media forked during an INVITE
on outbound calls if the To tag is different on a subsequent response as
that on an earlier response. We handle this correctly. There have
been reported cases where the To tag is the same but we still need to
follow the media. The pjproject patch in this commit adds the
capability to sip_inv and also adds the capability to control it at
runtime. The original "different tag" behavior was always controllable
at runtime but we never did anything with it and left it to default to
TRUE.
So, along with the pjproject patch, this commit adds options to both the
system and endpoint objects to control the two behaviors, and a small
logic change to session_inv_on_media_update in res_pjsip_session to
control the behavior at the endpoint level.
The default behavior for "different tags" remains the same at TRUE and
the default for "same tag" is FALSE.
Change-Id: I64d071942b79adb2f0a4e13137389b19404fe3d6
ASTERISK-27936
Reported-by: Ross Beer
ConfBridge can now send events to participants via in-dialog MESSAGEs.
All current Confbridge events are supported, such as ConfbridgeJoin,
ConfbridgeLeave, etc. In addition to those events, a new event
ConfbridgeWelcome has been added that will send a list of all
current participants to a new participant.
For all but the ConfbridgeWelcome event, the JSON message contains
information about the bridge, such as its id and name, and information
about the channel that triggered the event such as channel name,
callerid info, mute status, and the MSID labels for their audio and
video tracks. You can use the labels to correlate callerid and mute
status to specific video elements in a webrtc client.
To control this behavior, the following options have been added to
confbridge.conf:
bridge_profile/enable_events: This must be enabled on any bridge where
events are desired.
user_profile/send_events: This must be set for a user profile to send
events. Different user profiles connected to the same bridge can have
different settings. This allows admins to get events but not normal
users for instance.
user_profile/echo_events: In some cases, you might not want the user
triggering the event to get the event sent back to them. To prevent it,
set this to false.
A change was also made to res_pjsip_sdp_rtp to save the generated msid
to the stream so it can be re-used. This allows participant A's video
stream to appear as the same label to all other participants.
Change-Id: I26420aa9f101f0b2387dc9e2fd10733197f1318e
The OUTPUTDIR variable in ast_debug_tools.conf.sample is now set
to "/tmp" instead of "/some/directory".
Variables set on the command line or that are already in the
environment now take predecence over variables set in the config files.
ASTERISK-27846
Reported by: Ted G
Change-Id: Ie8baec52d531886bf5849ec1d59bb59dc87ad387
Analog phones dial overlap dialing and it is chan_dahdi's job to read the
numbers. It has three timeout constants that this commit converts to
channel-level configuration options:
* firstdigit_timeout: Default time (ms) to detect first digit
* interdigit_timeout: Default time (ms) to detect following digits
* matchdigit_timeout: Default time (ms) to wait in case of ambiguous
match. This happens when the dialed digits match a number in the current
context but are also the prefix of another number.
Change-Id: Ib728fa900a4f6ae56d1ed810aba61b6593fb7213
This change adds the ability for multiple REMB reports in
bridge_softmix to be combined according to a configured
behavior into a single report. This single report is sent
back to the sender of video, which adjusts the encoding bitrate
to be at or below the bitrate of the report. The available
behaviors are: lowest, highest, and average. Lowest uses the
lowest received bitrate. Highest uses the highest received
bitrate. Average goes through the received bitrates adding
them to the previous average and creates a new average.
Other behaviors can be added in the future and the existing
average one may be adjusted, but this provides the foundation
to do so.
Support for configuring which behavior to use has been
added to app_confbridge.
ASTERISK-27804
Change-Id: I9eafe4e7c1f72d67074a8d6acb26bfcf19322b66
This change adds a configuration option to app_confbridge which can be
used to set the interval at which we will send a combined REMB (remote
estimated maximum bitrate) frame to sources of video. The bridging API
has also been extended slightly to allow setting this so bridge_softmix
can use it.
ASTERISK-27786
Change-Id: I0e49eae60f369c86434414f3cb8278709c793c82
If the two formats on a channel are equal, we don't transcode and since
the generic plc needs slin to work, it doesn't get invoked.
* A new configuration option "genericplc_on_equal_codecs" was added
to the "plc" section of codecs.conf to allow generic packet loss
concealment even if no transcoding was originally needed.
Transcoding via SLIN is forced in this case.
ASTERISK-27743
Change-Id: I0577026a179dea34232e63123254b4e0508378f4
The pool cache gets in the way of finding use after free errors of memory
pool contents. Tools like valgrind and MALLOC_DEBUG don't know when a
pool is released because it gets put into the cache instead of being
freed.
* Added the "cache_pools" option to pjproject.conf. Disabling the option
helps track down pool content mismanagement when using valgrind or
MALLOC_DEBUG. The cache gets in the way of determining if the pool
contents are used after free and who freed it.
To disable the pool caching simply disable the cache_pools option in
pjproject.conf and restart Asterisk.
Sample pjproject.conf setting:
[startup]
cache_pools=no
* Made current users of the caching pool factory initialization and
destruction calls call common routines to create and destroy cached pools.
ASTERISK-27704
Change-Id: I64d5befbaeed2532f93aa027a51eb52347d2b828
When a line is the maximum length "\n" is found at sizeof(buf) - 2 since
the last character is actually the null terminator. In addition if a
line was exactly 8190 plus a multiple of 8192 characters long the config
parser would skip the following line.
Additionally fix comment in voicemail.conf sample config. It previously
stated that emailbody can only contain up to 512 characters which is
always wrong. The buffer is normally 8192 characters unless LOW_MEMORY
is enabled then it is 512 characters. The updated comment states that
the line can be up to 8190 or 510 characters since the line feed and
NULL terminator each use a character.
ASTERISK-26688 #close
Change-Id: I80864a0d40d2e2d8cd79d72af52a8f0a3a99c015
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
The sample modules.conf explicitly loaded res_musiconhold.so. This is
redundent as autoload=yes is already set. It causes warnings if
res_musiconhold.so was not installed and results in an unexpected load
if the admin disables autoload without remembering to remove the
res_musiconhold load statement.
Also remove reference to unknown module pbx_gtkconsole.
Change-Id: Ib01888994d9f1364b14d3c9fb6ff96774a6e580a
This patch adds the ability to configure a prompt which will be read
to the "winner" who pressed 1 (or the configured value) and received
the call.
ASTERISK-24372 #close
Change-Id: I6ec1c6c883347f7d1e1f597189544993c8d65272
The type=identify endpoint identification method can match by IP address
and by SIP header. However, the SIP header matching has limited
usefulness because you cannot specify the SIP header matching priority
relative to the IP address matching. All the matching happens at the same
priority and the order of evaluating the identify sections is
indeterminate. e.g., If you had two type=identify sections where one
matches by IP address for endpoint alice and the other matches by SIP
header for endpoint bob then you couldn't predict which endpoint is
matched when a request comes in that matches both.
* Extract the SIP header matching criteria into its own "header" endpoint
identification method so the user can specify the relative priority of the
SIP header and the IP address matching criteria in the global
endpoint_identifier_order option. The "ip" endpoint identification method
now only matches by IP address.
ASTERISK-27491
Change-Id: I9df142a575b7e1e3471b7cda5d3ea156cef08095
This patch adds the ability to set the wrapuptime on the queue member
config.
When the option is set the wrapuptime on the queue member is used instead
of the queue's wrapuptime.
ASTERISK-27483 #close
Change-Id: I11c85809537f974eb44dc5bbf82bcedd8a458902
The mute/unmute sounds are only played when the
action is initiated using the DTMF menu.
ASTERISK-24756
Change-Id: I55b3dd5bc166096bf5e2f547ddd0ce355f36e3dc
We should not do flood detection on video RTP streams. Video RTP streams
are very bursty by nature. They send out a burst of packets to update the
video frame then wait for the next video frame update. Really only audio
streams can be checked for flooding. The others are either bursty or
don't have a set rate.
* Added code to selectively disable packet flood detection for video RTP
streams.
ASTERISK-27440
Change-Id: I78031491a6e75c2d4b1e9c2462dc498fe9880a70
This no longer appears to exist, so no sense in causing confusion.
ASTERISK-27175 #close
Reported by: Tzafrir Cohen
Change-Id: Idde967924c69f6a741dc9a5ab7dacb44d22cf100
With Asterisk 12 (commit 866d968), the default of "icesupport" changed to
- "yes" in the module "res_rtp_asterisk" and
- "no" in the module "chan_sip".
The latter was reflected in the sample configuration file for "sip.conf". The
former did not make it into "rtp.conf.sample".
ASTERISK-20643
Change-Id: I2a2e0a900455d0767a99ea576e30adc6d7608a36
Beanstalkd is a simple to use job queue. It provides a means to
create multiple job queues called "tubes". Each tube can store
multiple jobs, with varying priorities with the queue. Queue
processing is available via a simple TCP socket or via well defined
libraries, avaialble at
https://github.com/kr/beanstalkd/wiki/client-libraries
This module is based upon the beanstalk-client library, available
for download at: https://github.com/deepfryed/beanstalk-client
This module currently doesn't support user defined events.
Change-Id: Ic3a087faeeac045d69a2a018e60e29831ddb95ab
The OUTPUTDIR environment variable can now be set either in the
environment itself or in ast_debug_tools.conf. If set, it's used
for all work products instead of /tmp.
Also added the --tarball-config option that includes the contents
of /etc/asterisk when either --tarball-coredumps or --tarball-results
are used.
Change-Id: I66b2553319df61caea5b313d084f51978f730b4c
The media frame cache gets in the way of finding use after free errors of
media frames. Tools like valgrind and MALLOC_DEBUG don't know when a
frame is released because it gets put into the cache instead of being
freed.
* Added the "cache_media_frames" option to asterisk.conf. Disabling the
option helps track down media frame mismanagement when using valgrind or
MALLOC_DEBUG. The cache gets in the way of determining if the frame is
used after free and who freed it. NOTE: This option has no effect when
Asterisk is compiled with the LOW_MEMORY compile time option enabled
because the cache code does not exist.
To disable the media frame cache simply disable the cache_media_frames
option in asterisk.conf and restart Asterisk.
Sample asterisk.conf setting:
[options]
cache_media_frames=no
ASTERISK-27413
Change-Id: I0ab2ce0f4547cccf2eb214901835c2d951b78c00
This mimics the behavior of Chrome and Firefox and creates an ephemeral
X.509 certificate for each DTLS session.
Currently, the only supported key type is ECDSA because of its faster
generation time, but other key types can be added in the future as
necessary.
ASTERISK-27395
Change-Id: I5122e5f4b83c6320cc17407a187fcf491daf30b4
When the identify_by option on an endpoint is set to ip it will
only be identified using the res_pjsip_endpoint_identifier_ip module.
This ensures that it is not mistakenly matched using the username of
the From header. To ensure behavior has not changed the default has
been changed to "username,ip" for the identify_by option.
ASTERISK-27206
Change-Id: I2170b86a7f7e221b4f00bf14aa1ef1ac5b050bbd
Beanstalkd is a simple to use job queue. It provides a means to
create multiple job queues called "tubes". Each tube can store
multiple jobs, with varying priorities with the queue. Queue
processing is available via a simple TCP socket or via well defined
libraries, avaialble at
https://github.com/kr/beanstalkd/wiki/client-libraries
This module is based upon the beanstalk-client library, available
for download at: https://github.com/deepfryed/beanstalk-client
Change-Id: I5fe4089a34ab3b39230786d9bbfddafa56715f48
When "rewrite_contact" is enabled, the "max_contacts" count option can
block re-registrations because the source port from the endpoint can be
random. When the re-registration is blocked, the endpoint may give up
re-registering and require manual intervention.
* The "remove_existing" option now allows a registration to succeed by
displacing any existing contacts that now exceed the "max_contacts" count.
Any removed contacts are the next to expire. The behaviour change is
beneficial when "rewrite_contact" is enabled and "max_contacts" is greater
than one. The removed contact is likely the old contact created by
"rewrite_contact" that the device is refreshing.
ASTERISK-27192
Change-Id: I64c107a10b70db1697d17136051ae6bf22b5314b
Incoming requests with non sip(s) URIs in the Request, To, From
or Contact URIs are now rejected with
PJSIP_SC_UNSUPPORTED_URI_SCHEME (416). This is performed in
pjsip_message_filter (formerly pjsip_message_ip_updater) and is
done at pjproject's "TRANSPORT" layer before a request can even
reach the distributor.
URIs read by res_pjsip_outbound_publish from pjsip.conf are now
also checked for both length and sip(s) scheme. Those URIs read
by outbound registration and aor were already being checked for
scheme but their error messages needed to be updated to include
scheme failure as well as length failure.
Change-Id: Ibb2f9f1d2dc7549da562af4cbd9156c44ffdd460
A new endpoint parameter "incoming_mwi_mailbox" allows Asterisk to
receive unsolicited MWI NOTIFY requests and make them available to
other modules via the stasis message bus.
res_pjsip_pubsub has a new handler "pubsub_on_rx_mwi_notify_request"
that parses a simple-message-summary body and, if
endpoint->incoming_mwi_account is set, calls ast_publish_mwi_state
with the voice-message counts from the message.
Change-Id: I08bae3d16e77af48fcccc2c936acce8fc0ef0f3c
An admin can configure app_minivm with an externnotify program to be run
when a voicemail is received. The app_minivm application MinivmNotify
uses ast_safe_system() for this purpose which is vulnerable to command
injection since the Caller-ID name and number values given to externnotify
can come from an external untrusted source.
* Add ast_safe_execvp() function. This gives modules the ability to run
external commands with greater safety compared to ast_safe_system().
Specifically when some parameters are filled by untrusted sources the new
function does not allow malicious input to break argument encoding. This
may be of particular concern where CALLERID(name) or CALLERID(num) may be
used as a parameter to a script run by ast_safe_system() which could
potentially allow arbitrary command execution.
* Changed app_minivm.c:run_externnotify() to use the new ast_safe_execvp()
instead of ast_safe_system() to avoid command injection.
* Document code injection potential from untrusted data sources for other
shell commands that are under user control.
ASTERISK-27103
Change-Id: I7552472247a84cde24e1358aaf64af160107aef1
Add ability to use tokens instead of passwords according to Google OAuth 2.0
protocol.
ASTERISK-27169
Reported by: Andrey Egorov
Tested by: Andrey Egorov
Change-Id: I07f7052a502457ab55010a4d3686653b60f4c8db
Setting this option will cause the Queue application to only announce
the caller's position if it has improved since the last time that we
announced it.
Change-Id: I173a124121422209485b043e2bf784f54242fce6
This change does a few things to improve packet loss and renegotiation:
1. On outgoing RTP streams we will now properly reflect out of order
packets and packet loss in the sequence number. This allows the
remote jitterbuffer to better reorder things.
2. Video updates can now be discarded for a period of time
after one has been sent to prevent flooding of clients.
3. For declined and removed streams we will now release any
media session resources associated with them. This was not
previously done and caused an issue where old state was being
used for a new stream.
4. RTP bundling was not actually removing bundled RTP instances
from the parent. This has been resolved by removing based on
the RTP instance itself and not the SSRC.
5. The code did not properly handle explicitly unbundling an
RTP instance from its parent. This now works as expected.
ASTERISK-27143
Change-Id: Ibd91362f0e4990b6129638e712bc8adf0899fd45
This patch creates a new configuration option called "webrtc". When enabled it
defaults and enables the following options that are needed in order for webrtc
to work in Asterisk:
rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled
media_encryption=dtls
dtls_verify=fingerprint
dtls_setup=actpass
When "webrtc" is enabled, this patch also parses the "msid" media level
attribute from an SDP. It will also appropriately add it onto the outgoing
session when applicable.
Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent.
ASTERISK-27119 #close
Change-Id: I5ec02e07c5d5b9ad86a34fdf31bf2f9da9aac6fd
This adds support for parsing timelen values from config files. This
includes support for all flags which apply to PARSE_INT32. Support for
this parser is added to ACO via the OPT_TIMELEN_T option type.
Fixes an issue where extra characters provided to ast_app_parse_timelen
were ignored, they now cause an error.
Testing is included.
ASTERISK-27117 #close
Change-Id: I6b333feca7e3f83b4ef5bf2636fc0fd613742554
By default, when res_musiconhold reloads or unloads, it sends a HUP
signal to custom applications (and all descendants), waits 100ms,
then sends a TERM signal, waits 100ms, then finally sends a KILL
signal. An application which is interacting with an external
device and/or spawns children of its own may not be able to exit
cleanly in the default times, expecially if sent a KILL signal, or
if it's children are getting signals directly from
res_musiconhoild.
* To allow extra time, the 'kill_escalation_delay'
class option can be used to set the number of milliseconds
res_musiconhold waits before escalating kill signals, with the
default being the current 100ms.
* To control to whom the signals are sent, the "kill_method" class
option can be set to "process_group" (the default, existing
behavior), which sends signals to the application and its
descendants directly, or "process" which sends signals only to the
application itself.
Change-Id: Iff70a1a9405685a9021a68416830c0db5158603b
When connected_line_method is "invite", we're supposed to determine
if the client can support UPDATE and if it can, send UPDATE instead
of INVITE to avoid the SDP renegotiation. Not only was pjproject
not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing
that invite_tsx wasn't NULL which isn't always the case.
* Updated chan_pjsip/update_connected_line_information to drop the
requirement that invite_tsx isn't NULL.
* Submitted patch to pjproject sip_inv.c that sets the
PJSIP_INV_SUPPORT_UPDATE flag correctly.
* Updated pjsip.conf.sample to clarify what happens when "invite"
is specified.
ASTERISK-27095
Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560
The stream topology (list of streams and order) is now stored with the
configured PJSIP endpoints and used during the negotiation process.
Media negotiation state information has been changed to be stored
in a separate object. Two of these objects exist at any one time
on a session. The active media state information is what was previously
negotiated and the pending media state information is what the
media state will become if negotiation succeeds. Streams and other
state information is stored in this object using the index (or
position) of each individual stream for easy lookup.
The ability for a media type handler to specify a callback for
writing has been added as well as the ability to add file
descriptors with a callback which is invoked when data is available
to be read on them. This allows media logic to live outside of
the chan_pjsip module.
Direct media has been changed so that only the first audio and
video stream are directly connected. In the future once the RTP
engine glue API has been updated to know about streams each individual
stream can be directly connected as appropriate.
Media negotiation itself will currently answer all the provided streams
on an offer within configured limits and on an offer will use the
topology created as a result of the disallow/allow codec lines.
If a stream has been removed or declined we will now mark it as such
within the resulting SDP.
Applications can now also request that the stream topology change.
If we are told to do so we will limit any provided formats to the ones
configured on the endpoint and send a re-invite with the new topology.
Two new configuration options have also been added to PJSIP endpoints:
max_audio_streams: determines the maximum number of audio streams to
offer/accept from an endpoint. Defaults to 1.
max_video_streams: determines the maximum number of video streams to
offer/accept from an endpoint. Defaults to 1.
ASTERISK-27076
Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7
A new global option "imap_poll_logout" was added to specify whether need to
disconnect from the IMAP server after polling of mailboxes.
ASTERISK-27068 #close
Closing IMAP connection after loading mailbox from voicemail.conf
ASTERISK-24052 #close
Change-Id: Ib7558ba04516240a32b65f42e9be64372a0ae12a
This option was added to control whether to notify dialog-info state
'early' or 'confirmed' on Ringing when already INUSE.
The value "yes" is useful for some SIP phones (Cisco SPA)
to be able to indicate and pick up ringing devices.
ASTERISK-26919 #close
Change-Id: Ie050bc30023543c7dfb4365c5be3ce58c738c711
Additional variable to work alongside QUEUE_MAX_PENALTY and QUEUE_MIN_PENALTY,
including an extra parameter in queuerules.conf. This value causes lower
Agent penalty values to "raise up" so that they can join higher penalty agents
and be treated equally after a period of time.
ASTERISK-26995 #close
Change-Id: If1c6421a983667a5ac4c359f6dac25b212b4c459