https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296230 | russell | 2010-11-24 17:29:44 -0600 (Wed, 24 Nov 2010) | 20 lines
Merged revisions 296221 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296221 | russell | 2010-11-24 17:28:19 -0600 (Wed, 24 Nov 2010) | 13 lines
Merged revisions 296213 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296213 | russell | 2010-11-24 17:26:43 -0600 (Wed, 24 Nov 2010) | 6 lines
Make Asterisk less crashy.
Since we might not put a new translation path on the channel, go ahead and
set it to NULL right after destroying the old one to ensure we don't try
to free an invalid translation path later on.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296235 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296167 | rmudgett | 2010-11-24 16:49:48 -0600 (Wed, 24 Nov 2010) | 57 lines
Merged revisions 296166 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296166 | rmudgett | 2010-11-24 16:42:45 -0600 (Wed, 24 Nov 2010) | 50 lines
Merged revisions 296165 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296165 | rmudgett | 2010-11-24 16:41:07 -0600 (Wed, 24 Nov 2010) | 43 lines
Oneway audio to SIP phone from FXS port after FXS port gets a CallWaiting pip.
The FXS connected phone has to have CW/CID support to fail, as it will
send back a DTMF 'A' or 'D' when it's ready to receive CallerID. A normal
phone with no CID never fails. Also the SIP phone does not hear MOH when
the CW call is answered.
The DTMF end frame is suppressed when the phone acknowledges the CW signal
for CID. The problem is the DTMF begin frame needs to be suppressed as
well. The DTMF begin frame is causing SIP to start sending the DTMF RTP
frames. Since the DTMF end frame is suppressed, SIP will not stop sending
those DTMF RTP packets.
* Suppress the DTMF begin and end frames when the channel driver is
looking for DTMF digits.
* Fixed a couple issues caused by not cleaning up the CID spill if you
answer the CW call while it is sending the CID spill.
* Fixed not sending CW/CID spill to the phone when the call is natively
bridged. (Fixed by not using native bridge if CW/CID is possible.)
* Suppress received audio when sending CW/CID spills. The other parties
involved do not need to hear the CW/CID spills and may be confused if the
CW call is for them.
(closes issue #18129)
Reported by: alecdavis
Patches:
issue_18129_v1.8_v3.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, rmudgett
NOTE:
* v1.4 does not have the main problem fixed by suppressing the DTMF start
frames. The other three items fixed are relevant.
* If you really must restore native bridging between analog ports, you
need to disable CW/CID either by configuring chan_dahdi.conf
callwaitingcallerid=no or dialing *70 before dialing the number to
temporarily disable CW.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296084 | russell | 2010-11-24 14:23:46 -0600 (Wed, 24 Nov 2010) | 26 lines
Merged revisions 296083 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296083 | russell | 2010-11-24 14:23:11 -0600 (Wed, 24 Nov 2010) | 19 lines
Merged revisions 296082 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296082 | russell | 2010-11-24 14:22:32 -0600 (Wed, 24 Nov 2010) | 12 lines
Fix false reporting of an error by set_format().
In the case that the native format was able to be changed to match the
new requested format, the code proceeded to attempt to build a translation
path, anyway. The result would be NULL, since no translation path is
necessary and resulted in this function thinking an error has occurred.
This case is now specifically caught and no attempt to build a translation
path is attempted.
Thanks to our automated tests and bamboo.asterisk.org for catching this problem
and making a whole lot of noise when things started failing. :-)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296002 | russell | 2010-11-24 11:13:08 -0600 (Wed, 24 Nov 2010) | 52 lines
Merged revisions 296001 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296001 | russell | 2010-11-24 11:03:16 -0600 (Wed, 24 Nov 2010) | 45 lines
Merged revisions 296000 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296000 | russell | 2010-11-24 10:48:39 -0600 (Wed, 24 Nov 2010) | 38 lines
Handle failures building translation paths more effectively.
The problem scenario occurred on a heavily loaded system that was using the
codec_dahdi module and exceeded the hardware transcoding capacity. The failure
mode at that point was not good. The report came in to us as an Asterisk
lock-up. The "core show locks" shows a ton of threads locked up (but no
obvious deadlock). Upon deeper investigation, when the system is in this
state, the CPU was maxed out. The CPU was being consumed by the Asterisk
logger spewing messages on every audio frame for calls set up after transcoder
capacity was reached.
The purpose of this patch is to make Asterisk handle failures to create a
translation path in a more graceful manner. If we can't translate, then the
call just needs to be dropped, as it's not going to work. These are the
changes:
1) In set_format() of channel.c (which is called by set_read_format() and
set_write_format()), it was ignoring if ast_translator_build_path() failed and
returned NULL. It now pays attention to that case and returns a result
reflecting failure. With this change in place, the bridging code will
immediately detect a failure and end the bridge instead of proceeding to try to
bridge frames that can't be translated and making channel drivers freak out by
sending them frames in a format they weren't expecting.
2) In ast_indicate_data() of channel.c, failure of ast_playtones_start() was
ignored. It is now reflected in the return value of the function. This didn't
turn out to have any affect on the bug, but seemed like a good change to leave
in.
3) In app_dial(), when only sending a call to a single endpoint, it will
attempt to do some bridging of its own of early audio. It uses
make_compatible() when it's going to do this. However, it ignored failure from
make compatible. So, even with the fix from #1, if there was early audio going
through app_dial, there would still be a period of invalid frames passing
through. After detecting failure here, Dial() exits.
ABE-2658
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r295866 | rmudgett | 2010-11-22 13:36:10 -0600 (Mon, 22 Nov 2010) | 60 lines
Merged revisions 295843 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r295843 | rmudgett | 2010-11-22 13:28:23 -0600 (Mon, 22 Nov 2010) | 53 lines
Merged revisions 295790 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r295790 | rmudgett | 2010-11-22 12:46:26 -0600 (Mon, 22 Nov 2010) | 46 lines
The channel redirect function (CLI or AMI) hangs up the call instead of redirecting the call.
To recreate the problem:
1) Party A calls Party B
2) Invoke CLI "channel redirect" command to redirect channel call leg
associated with A.
3) All associated channels are hung up.
Note that if the CLI command were done on the channel call leg associated
with B it works.
This regression was a result of the fix for issue #16946
(https://reviewboard.asterisk.org/r/740/).
The regression affects all features that use an async goto to execute the
dialplan because of an external event: Channel redirect, AMI redirect, SIP
REFER, and FAX detection.
The struct ast_channel._softhangup code is a mess. The variable is used
for several purposes that do not necessarily result in the call being hung
up. I have added doxygen comments to describe how the various _softhangup
bits are used. I have corrected all the places where the variable was
tested in a non-bit oriented manner.
The primary fix is the new AST_CONTROL_END_OF_Q frame. It acts as a weak
hangup request so the soft hangup requests that do not normally result in
a hangup do not hangup.
JIRA SWP-2470
JIRA SWP-2489
(closes issue #18171)
Reported by: SantaFox
(closes issue #18185)
Reported by: kwemheuer
(closes issue #18211)
Reported by: zahir_koradia
(closes issue #18230)
Reported by: vmarrone
(closes issue #18299)
Reported by: mbrevda
(closes issue #18322)
Reported by: nerbos
Review: https://reviewboard.asterisk.org/r/1013/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r295747 | rmudgett | 2010-11-19 21:11:15 -0600 (Fri, 19 Nov 2010) | 13 lines
One way audio before answering call waiting call on analog port.
* Analog call waiting Caller ID spills could get stuck resulting in one
way audio until the waiting call is answered. This only happens on the
second (and later) call waiting call if the active call is not the first
call.
* The CLI/AMI "dahdi show channel" command could report the wrong channel
information.
Must keep the struct analog_pvt.owner and struct dahdi_pvt.owner pointer
in sync.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295748 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r295711 | russell | 2010-11-19 18:50:00 -0600 (Fri, 19 Nov 2010) | 36 lines
Merged revisions 295710 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r295710 | russell | 2010-11-19 18:45:51 -0600 (Fri, 19 Nov 2010) | 29 lines
Fix cache of device state changes for multiple servers.
This patch addresses a regression where device states across multiple servers
were not being processing completely correctly. The code works to determine
the overall state by looking at the last known state of a device on each
server. However, there was a regression due to some invasive rewrites of how
the cache works that led to the cache only storing the last device state change
for a device, regardless of which server it was on.
The code is set up to cache device state change events by ensuring that each
event in the cache has a unique device name + entity ID (server ID). The code
that was responsible for comparing raw information elements (which EID is)
always returned a match due to a memcmp() with a length of 0.
There isn't much code to fix the actual bug. This patch also introduces a new
CLI command that was very useful for debugging this problem. The command
allows you to dump the contents of the event cache.
(closes issue #18284)
Reported by: klaus3000
Patches:
issue18284.rev1.txt uploaded by russell (license 2)
Tested by: russell, klaus3000
(closes issue #18280)
Reported by: klaus3000
Review: https://reviewboard.asterisk.org/r/1012/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295712 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the ability to play a sound file, listen for more than just one digit,
specify
escape characters. Backwards compatible (to work with only timeout specified).
(closes issue #15531)
Reported by: diLLec
Patches:
asterisk-res_agi-203638-patched.patch uploaded by diLLec (license 839)
Tested by: diLLec, espiceland
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r295516 | rmudgett | 2010-11-19 10:47:11 -0600 (Fri, 19 Nov 2010) | 13 lines
Bring sig_analog extraction more into alignment with orig-trunk/v1.6.2 chan_dahdi.
* Restore SMDI support.
* Fixed initial value of struct analog_pvt.use_callerid. It may get
forced on depending upon other config options.
* Call analog_dnd() instead of manual inlined code.
* Removed unused struct analog_pvt.usedistinctiveringdetection.
* Removed the struct analog_pvt.unknown_alarm flag. It was really the
struct analog_pvt.inalarm flag.
* Use ast_debug() instead of ast_log(LOG_DEBUG).
* Rename several function's index variable to idx.
* Some formatting tweaks.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294905 | jpeeler | 2010-11-12 14:52:06 -0600 (Fri, 12 Nov 2010) | 30 lines
Merged revisions 294904 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r294904 | jpeeler | 2010-11-12 14:51:15 -0600 (Fri, 12 Nov 2010) | 23 lines
Merged revisions 294903 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r294903 | jpeeler | 2010-11-12 14:49:09 -0600 (Fri, 12 Nov 2010) | 16 lines
Fix regression causing abort in voicemail after opening a mailbox with no mesgs.
In order to be more safe, some error handling code was changed to respect more
error conditions including the potential memory allocation failure for deleted
and heard message tracking introduced in 293004. However, last_message_index
returns -1 for zero messages (perhaps as expected) and was triggering the
stricter error checking. Because last_message_index is only called directly
in one place, just return 0 from open_mailbox (for file based storage) when no
messages are detected unless a real error has occurred.
(closes issue #18240)
Reported by: leobrown
Patches:
bug18240.1-6-2.diff.txt uploaded by alecdavis (license 585)
Tested by: pabelanger
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294907 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294823 | rmudgett | 2010-11-11 20:45:22 -0600 (Thu, 11 Nov 2010) | 25 lines
Merged revisions 294822 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r294822 | rmudgett | 2010-11-11 20:44:12 -0600 (Thu, 11 Nov 2010) | 18 lines
Merged revisions 294821 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r294821 | rmudgett | 2010-11-11 20:41:13 -0600 (Thu, 11 Nov 2010) | 11 lines
Asterisk is getting a "No D-channels available!" warning message every 4 seconds.
Asterisk is just whining too much with this message: "No D-channels
available! Using Primary channel XXX as D-channel anyway!".
Filtered the message so it only comes out once if there is no D channel
available without an intervening D channel available period.
(closes issue #17270)
Reported by: jmls
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r294740 | russell | 2010-11-11 16:13:38 -0600 (Thu, 11 Nov 2010) | 11 lines
Remove most of the contents of the doc dir in favor of the wiki content.
This merge does the following things:
* Removes most of the contents from the doc/ directory in favor
of the wiki - http://wiki.asterisk.org/
* Updates the build_tools/prep_tarball script to know how to export
the contents of the wiki in both PDF and plain text formats so that
the documentation is still included in Asterisk release tarballs.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294741 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294734 | jpeeler | 2010-11-11 15:58:25 -0600 (Thu, 11 Nov 2010) | 32 lines
Merged revisions 294733 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r294733 | jpeeler | 2010-11-11 15:57:22 -0600 (Thu, 11 Nov 2010) | 25 lines
Merged revisions 294688 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r294688 | jpeeler | 2010-11-11 15:12:27 -0600 (Thu, 11 Nov 2010) | 18 lines
Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time. This
scenario has the potential to progress to the point of saturating a link just
from options packets. The fix was to ensure that the poke scheduler checks to
see if a peer is in the peer list before continuing to poke. The reason a peer
must be in the peer list to be able to properly manage an options dialog is
because otherwise the call pointer is lost when the peer is regenerated from
the database, which is how existing qualify dialogs are detected.
(closes issue #16382)
(closes issue #17779)
Reported by: lftsy
Patches:
bug16382-3.patch uploaded by jpeeler (license 325)
Tested by: zerohalo
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r294349 | rmudgett | 2010-11-09 10:55:32 -0600 (Tue, 09 Nov 2010) | 17 lines
Analog lines do not transfer CONNECTED LINE or execute the interception macros.
Add connected line update for sig_analog transfers and simplify the
corresponding sig_pri and chan_misdn transfer code.
Note that if you create a three-way call in sig_analog before transferring
the call, the distinction of the caller/callee interception macros make
little sense. The interception macro writer needs to be prepared for
either caller/callee macro to be executed. The current implementation
swaps which caller/callee interception macro is executed after a three-way
call is created.
Review: https://reviewboard.asterisk.org/r/996/
JIRA ABE-2589
JIRA SWP-2372
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294278 | jpeeler | 2010-11-08 15:59:45 -0600 (Mon, 08 Nov 2010) | 23 lines
Merged revisions 294277 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r294277 | jpeeler | 2010-11-08 15:58:13 -0600 (Mon, 08 Nov 2010) | 16 lines
Fix playback failure when using IAX with the timerfd module.
To fix this issue the alert pipe will now be used when the timerfd module is
in use. There appeared to be a race that was not solved by adding locking in the
timerfd module, but needed to be there anyway. The race was between the timer
being put in non-continuous mode in ast_read on the channel thread and the IAX
frame scheduler queuing a frame which would enable continuous mode before the
non-continuous mode event was read. This race for now is simply avoided.
(closes issue #18110)
Reported by: tpanton
Tested by: tpanton
I put tested by tpanton because it was tested on his hardware. Thanks for the
remote access to debug this issue!
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r294125 | rmudgett | 2010-11-08 11:16:01 -0600 (Mon, 08 Nov 2010) | 33 lines
valgrind reported references to freed memory during a mISDN hangup collision.
Bad things have been happening in chan_misdn because the chan_misdn
channel private struct chan_list is not protected from reentrancy. Hangup
collisions have be causing read and write accesses to freed memory.
Converted chan_misdn struct chan_list to an ao2 object for its reference
counting feature.
**********
Removed an impediment to converting chan_list to an ao2 object.
The use of the other_ch member in chan_list is shaky at best. It is set
if the incoming and outgoing call legs are mISDN. The use of the other_ch
member goes against the Asterisk architecture and can even cause problems.
1) It is used to disable echo cancellation. This could be bad if the call
is forked and the winning call leg is not mISDN or the winning call leg is
not the last mISDN channel called by the fork. The other_ch would become
a dangling pointer.
2) It is used when the far end is alerting to hear the far end's inband
audio instead of Asterisk's generated ringback tone. This is bad if the
call is forked. You would only hear the last forked mISDN channel and it
may not be ringing yet.
The other_ch would become a dangling pointer if the call is later
transferred.
**********
JIRA SWP-2423
JIRA ABE-2614
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294127 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC3261 section 12 about dialog creation says an INVITE transaction
results in an established dialog once it receives the 200 OK response.
It is possible to receive multiple differing 200 OK responses for a
single outbound INVITE Request, and this should result in establishing
multiple dialogs.
This patch allows for all differing 200 OK responses to an INVITE request
to establish a separate dialog, but only the first dialog is kept. All other
resulting dialogs from the initial request are immediately ACKed and then
immediately terminated with a BYE request.
Review: https://reviewboard.asterisk.org/r/946/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294083 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r293970 | sruffell | 2010-11-04 19:07:11 -0500 (Thu, 04 Nov 2010) | 32 lines
Merged revisions 293969 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r293969 | sruffell | 2010-11-04 19:06:02 -0500 (Thu, 04 Nov 2010) | 25 lines
Merged revisions 293968 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r293968 | sruffell | 2010-11-04 19:02:53 -0500 (Thu, 04 Nov 2010) | 17 lines
codecs/codec_dahdi: Prevent "choppy" audio when receiving unexpected frame sizes.
dahdi-linux 2.4.0 (specifically commit 9034) added the capability for
the wctc4xxp to return more than a single packet of data in response to
a read. However, when decoding packets, codec_dahdi was still assuming
that the default number of samples was in each read.
In other words, each packet your provider sent you, regardless of size,
would result in 20 ms of decoded data (30 ms if decoding G723). If your
provider was sending 60 ms packets then codec_dahdi would end up
stripping 40 ms of data from each transcoded frame resulting in "choppy"
audio.
This would only affect systems where G729 packets are arriving in sizes
greater than 20ms or G723 packets arriving in sizes greater than 30ms.
DAHDI-744.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293971 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Richard Mudgett
Olle Johansson
Sean Bright
Erin Spiceland
Terry Wilson
Brett Bryant
Leif Madsen
Paul Belanger
Tilghman Lesher
Jeff Peeler
Matthew Nicholson
David Vossel
Shaun Ruffell