Also covers ast_app_parse_timelen-fail-zero-length.patch, but the patch was
replaced with one of my own.
(issue ASTERISK-22467)
Reported by: Corey Farrell
Patches:
chan_dahdi-cleanup_push.patch uploaded by coreyfarrell (license 5909)
clicompat-r2.patch uploaded by coreyfarrell (license 5909)
codecs-ilbc-doCPLC.patch uploaded by coreyfarrell (license 5909)
data-cleanup-test-registration.patch uploaded by coreyfarrell (license 5909)
main-asterisk-kill-listener.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 401704 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 401705 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 401706 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401707 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When reworking chan_iax2 for IPv6, the ability to bind to multiple addresses
was removed by mistake. This patch restores this functionality and adds notes
about IPv6 addresses in the sample config.
(closes issue ASTERISK-22741)
Reported by: Joshua Colp
Tested by: Michael L. Young
Patches:
asterisk-22741-fix-binding-multiple-addr.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2945/
........
Merged revisions 401488 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401489 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The queue_log entry resulting from CLI "queue remove member" when
log_membername_as_agent is enabled is wrong. It always uses the interface
name instead of the member name in the queue_log entry.
* Get the queue member before removing it from the queue so the member
name is available for the queue_log entry.
(closes issue ASTERISK-21826)
Reported by: Oscar Esteve
Patches:
fix_membername.diff (license #6505) patch uploaded by Oscar Esteve
(modified to fix potential ref leak)
........
Merged revisions 401433 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 401434 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original issue noted that the bridge is orphaned when res_parking.so
is not loaded and a call uses the dial kK flags.
A similar issue happens when only one of the park flags is used. In this
case you have the bridge with one or the other channel left in it. The
channel and bridge will stay around until the channel hangs up.
* Fixed the initial bridge channel push failure to act as if the channel
were kicked out of the bridge. The bridge then decides if it needs to be
dissolved.
(closes issue ASTERISK-22629)
Reported by: Kevin Harwell
Review: https://reviewboard.asterisk.org/r/2928/
........
Merged revisions 401424 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401425 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Parking timeouts did not set any DTMF features for the channel calling the
parker back.
* Added code to set the parkedcalltransfers, parkedcallreparking,
parkedcallhangup, and parkedcallrecording options appropriately for the
channels when a parking timeout occurs. The recall channel DTMF options
are set using the BRIDGE_FEATURES channel variable to allow the other
timeout options to have the DTMF features available.
(closes issue ASTERISK-22630)
Reported by: Kevin Harwell
Review: https://reviewboard.asterisk.org/r/2942/
........
Merged revisions 401422 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401423 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This particular debug message, during a stress test, was logged so
often that it appeared that there may be a memory leak in the logger
code. In actuality, there was no memory leak, but the logger thread
was having a hard time keeping up with the demands of the rest of the
system.
Since this debug message has no value at all, the best way to fix the
problem was to just remove the message.
(closes issue AST-1225)
reported by John Bigelow
Patches:
spammy_log.diff uploaded by Mark Michelson (License #5049)
........
Merged revisions 401364 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A common idiom in Asterisk is to due something like:
for (ao2_obj = list_beginning; ao2_obj = next_item; ao2_ref(ao2_obj, -1)) {
...do stuff...
}
This is nice because it automatically takes care of the object references
for you. However, there is a pitfall here. If a break statement is in the
for loop, then the current reference is not cleaned up. In some cases, this
is on purpose, but in others there is a leak. This commit fixes the leak
cases.
........
Merged revisions 401248 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Most callers of ast_channel_make_compatible() happen before the channels
enter a two party bridge. With the new bridging framework, two party
bridging technologies may also call ast_channel_make_compatible() when
there is more than one thread involved with the two channels.
* Added channel lock protection in set_format() and
ast_channel_make_compatible_helper() when dealing with the channel's
native formats while setting up a translation path.
* Fixed best_src_fmt and best_dst_fmt usage consistency in
ast_channel_make_compatible_helper(). The call to
ast_translator_best_choice() got them backwards.
* Updated some callers of ast_channel_make_compatible() and the function
documentation. There is actually a difference between the two channels
passed in.
* Fixed the deadlock potential in res_fax.c dealing with
ast_channel_make_compatible(). The deadlock potential was already there
anyway because res_fax called ast_channel_make_compatible() with chan
locked.
(closes issue ASTERISK-22542)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2915/
........
Merged revisions 401239 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r378303 the AST_FLAG_DISABLE_DEVSTATE_CACHE flag was added that tells
the devstate system to not cache states for non-real devices. However,
when optimizing away channels (ast_do_masquerade), that flag wasn't
copied.
In my case, using Local devices as queue members created a situation
where the endpoint was considered in use, but the state change of the
device being available again was ignored (not cached). The endpoint
channel was optimized into the (previously) Local channel, but kept
the do-not-cache flag. The end result being that the queue member
apparently stayed in use forever.
(closes issue ASTERISK-22718)
Reported by: Walter Doekes
Review: https://reviewboard.asterisk.org/r/2925/
........
Merged revisions 401178 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 401179 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 401180 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401181 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A condition was added in a commit to fix ASTERISK-21374, that, if the
SIP_PAGE3_NAT_AUTO_RPORT flag was set, to then copy a peer's SIP_NAT_FORCE_RPORT
flag to the dialog. This condition should not have been there since it assumed
that if Asterisk is in an environment where NAT is involved, that the auto_* nat
settings or force_rport setting would be on in the global settings. If the nat
setting in the global setting is set to 'nat=no' and then turned on for peers
(which is not quite the recommended way, although it is allowed) this flag is
never copied to the dialog resulting in problems like, REGISTER replies going
to the wrong port.
This patch removes this conditional check and will now always use the peer's
flag which by this point in the code the checks on whether the peer is behind
NAT or not (if using auto_force_rport) have already been run.
(closes issue ASTERISK-22236)
Reported by: Filip Frank
Tested by: Michael L. Young
Patches:
asterisk-2236-always-set-rport.diff uploaded
by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2919/
........
Merged revisions 401167 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 401168 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This makes it clear that the ARI API calls for listing channels and
bridges will list all channels or bridges in the system and not just
those that are in or are controlled by a Stasis application.
(closes issue ASTERISK-22635)
Reported by: Kevin Harwell
........
Merged revisions 401087 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401088 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Consistently compare format2index() return value so matrix_get() cannot
get passed negative values.
* Optimize ast_translator_best_choice() to defer initializing things until
needed. Also cached the matrix_get() return value rather than repeatedly
calling it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds the list of expected errors to the /bridges/{bridgeId}/record
ARI documentation so that outbound 4xx errors validate properly.
Previously, this would result in a response validation failure.
(closes issue ASTERISK-22627)
Reported by: Joshua Colp
........
Merged revisions 401018 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@401019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a 200 OK for an initial INVITE is received, we were doing
the right thing by ACKing and sending an immediate BYE. However,
we also were doing the wrong thing and queuing an answer frame,
thus causing the call to be answered. This would cause the call
to be hung up by the channel thread, thus resulting in a second
BYE being sent out.
In this fix, I also have set the hangupcause to be correct since
the initial BYE being sent by Asterisk had an unknown hangup
cause. I have changed to using "Bearer capabilty not available"
since the call was hung up due to an SDP offer/answer error.
(closes issue ASTERISK-22621)
reported by Kinsey Moore
........
Merged revisions 400970 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 400971 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 400984 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Because I added a wiki_description to models and not their properties, the
rendered wiki page had the model description instead of the property
descriptions, which looks very silly indeed.
(closes issue ASTERISK-22705)
........
Merged revisions 400958 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Jonathan Rose
Richard Mudgett
John Bigelow
Kinsey Moore
Joshua Colp
Michael L. Young
Matthew Jordan
Mark Michelson
Kevin Harwell
David M. Lee
Walter Doekes
Paul Belanger