had no effect
* Updated dialing API documentation to indicate that timeouts
are specified in milliseconds
* Added a new timeout argument to the Page application. If time
expires, any endpoints which have not answered will be hung up.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
_must_ be increased before creating the scheduler entry. Otherwise, you
create a race condition where the reference count may hit zero and the
object can disappear out from under you. This could also would have
incorrectly decreased the reference count in the case that the scheduler
add failed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
silly to have a bunch of case statements with duplicated
code in each case. Instead, just use the built-in fallthrough
capability of case statements and reduce the code to
a single instance
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Remove a comment that says that the monitor thread is the only one that
ever touches these objects. This is no longer the case with TCP. Also,
I would eventually like to get the scheduler in its own thread, so this
is just a poor assumption to make.
- Note that reference counting of these objects with respect to scheduler
entries is not complete. There are some leaked references when deleting
scheduler entries.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152877 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the low default value of featuredigittimeout, I decided it
was high time to change it. I have changed the default to
2000 ms based on a suggestion from Leif Madsen.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152807 65c4cc65-6c06-0410-ace0-fbb531ad65f3
entry, then app_directory would crash when attempting to
read that entry from the file. We now check for the NULL
or empty string properly so that there will be no crash.
(closes issue #13804)
Reported by: bluecrow76
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152646 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152538 | murf | 2008-10-28 23:19:04 -0600 (Tue, 28 Oct 2008) | 14 lines
A little documentation cross-ref between features and
dial and queue... I wasted some time (stupidly) trying
to get the one-touch parking stuff working, because it
didn't occur to me that I had to also have the corresponding
options in the dial command! Duh! (In all this time, I never
set this up before!)
So, to keep some poor fool from suffering the same fate,
I made the features.conf.sample file mention the corresponding
opts in dial/queue; and the docs for dial/app specifically
mention the corresponding decls in the feature.conf file.
I hope this doesn't spoil some vast, eternal plan...
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152535 | murf | 2008-10-28 22:36:32 -0600 (Tue, 28 Oct 2008) | 46 lines
The magic trick to avoid this crash is not to
try to find the channel by name in the list,
which is slow and resource consuming, but rather
to pay attention to the result codes from the
ast_bridge_call, to which I added the
AST_PBX_NO_HANGUP_PEER_PARKED value, which
now are returned when a channel is parked.
Why? because CDR's aren't generated via parking,
so nothing is needed, but if a transfer occurred,
there are critical things I need.
If you get AST_PBX_KEEPALIVE,
then don't touch the channel pointer.
If you get AST_PBX_NO_HANGUP_PEER, or
AST_PBX_NO_HANGUP_PEER_PARKED, then don't
touch the peer pointer.
Updated the several places where the results
from a bridge were not being properly obeyed,
and fixed some code I had introduced so that
the results of the bridge were not overridden
(in trunk).
All the places that previously tested for
AST_PBX_NO_HANGUP_PEER now have to check for
both AST_PBX_NO_HANGUP_PEER and AST_PBX_NO_HANGUP_PEER_PARKED.
I tested this against the 4 common parking
scenarios:
1. A calls B; B answers; A parks B; B hangs up while A is getting the parking
slot announcement, immediately after being put on hold.
2. A calls B; B answers; A parks B; B hangs up after A has been hung up, but
before the park times out.
3. A calls B; B answers; B parks A; A hangs up while B is getting the parking slot announcement, immediately after being put on hold.
4. A calls B; B answers; B parks A; A hangs up after B has been hung up, but before the park times out.
No crash.
I also ran the scenarios above against valgrind, and accesses looked good.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152536 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152368 | tilghman | 2008-10-28 12:04:56 -0500 (Tue, 28 Oct 2008) | 8 lines
Reset all DIAL variables back to blank, in case Dial is called multiple times
per call (which could otherwise lead to inconsistent status reports).
(closes issue #13216)
Reported by: ruddy
Patches:
20081014__bug13216.diff.txt uploaded by Corydon76 (license 14)
Tested by: ruddy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152369 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152059 | seanbright | 2008-10-26 16:23:36 -0400 (Sun, 26 Oct 2008) | 7 lines
Since passing \0 as the second argument to strchr is valid (and will
match the trailing \0 of a string) we need to check that first, otherwise
we end up with incorrect results. Fix suggested by reporter.
(closes issue #13787)
Reported by: meitinger
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@152060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r151905 | russell | 2008-10-25 05:59:02 -0500 (Sat, 25 Oct 2008) | 8 lines
Move AMI initialization to occur after loading modules. This prevents a
deadlock when someone tries to initiate a module reload from the AMI just
as Asterisk is starting.
(closes issue #13778)
Reported by: hotsblanc
Fix suggested by hotsblanc
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@151906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r151763 | twilson | 2008-10-23 11:04:42 -0500 (Thu, 23 Oct 2008) | 9 lines
Backport fix from 1.6.0 that allows you to set parkedcalltransfers=no|caller|callee|both, but default to both which would be the equivalent of the existing behaviour.
The problem was that if someone parked a call, the callee and caller would both get assigned the builtin transfer feature, which would not only be potentially giving someone the ability to transfer themselves when they shouldn't have it, but would also dissallow reinviting the media off of the call.
(closes issue #12854)
Reported by: davidw
Patches:
parkingfix4.diff.txt uploaded by otherwiseguy
Tested by: davidw, otherwiseguy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@151764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Russell Bryant
Sean Bright
Mark Michelson
Terry Wilson
Tilghman Lesher
Kevin P. Fleming
Steve Murphy
Doug Bailey
Jeff Peeler
Jason Parker
Olle Johansson